Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EE59 –
22
Capacitance (µF)
Rated Voltage Mark
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Lot number
Negative polarity
marking (–)
jFK
A±0.2
W
()Reference size
L
φD±0.5
H
B±0.2
(I)
K
(P) (I)
+
0.3 max.
Pressure Relief (φ10 and larger)
Features
Endurance: 2000 h at 105 °C
Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
Vibration-proof product is available upon request. (φ8 mm and larger)
RoHS directive compliant
Surface Mount Type
Series: FK Type: V
FK High temperature Lead-Free refl ow(suf x:A)
Specifi cations
Category Temp. Range 55 °C to +105 °C
Rated W.V.Range 6.3 V.DC to 35 V.DC
Nominal Cap.Range 4.7 µF to 1500 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δPlease see the attached High temperature lead-free refl ow products list.
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 22222
Z(–40 °C)/Z(+20 °C) 33333
Z(–55 °C)/Z(+20 °C) 44433
Endurance
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ< initial specifi ed value
DC leakage current < initial specifi ed value
Example:6.3 V 22 µF
Marking color : BLACK
Rated Voltage Mark
(mm)
j6.3 V
A10 V
C16 V
E25 V
V35 V
Size
code DL
A, B
H
IWPK
B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 - 0.20
C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 - 0.20
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 - 0.20
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 - 0.20
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 - 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.15
+ 0.15
Di men sions in mm (not to scale) Marking
Cap (µF) Frequency (Hz)
120 1 k 10 k 100 k to
4.7 to 470 0.65 0.85 0.95 1.00
680 to 1500 0.70 0.90 0.95 1.00
Frequency correction factor for ripple current
Sep. 201103
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EE60 –
High temperature Lead-Free refl ow
W.V. Cap.
20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
Impedance
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
(pcs)
6.3
22 45.8B901.350.26
EEEFK0J220AR (5) 2000
47 4 5.8 (B) 90 1.35 0.26 EEEFKJ470UAR (5) 2000
5 5.8 C 160 0.70 0.26 EEEFK0J470AR (5) 1000
100 5 5.8 (C) 160 0.70 0.26 EEEFKJ101UAR (5) 1000
6.3 5.8 D 240 0.36 0.26 EEEFK0J101AP (5) 1000
220 6.3 5.8 D 240 0.36 0.26 EEEFK0J221AP (5) 1000
330 6.3 7.7 D8 280 0.34 0.26 EEEFKJ331XAP (5) 900
8 6.2 E 300 0.26 0.26 EEEFK0J331AP (6) 1000
470 8 10.2F 6000.160.26
EEEFK0J471AP (6) 500
1000 8 10.2F6000.160.26
EEEFK0J102AP (6) 500
1500 10 10.2 G 850 0.08 0.26 EEEFK0J152AP (6) 500
10
22 45.8B901.350.19
EEEFK1A220AR (5) 2000
33 4 5.8 (B) 90 1.35 0.19 EEEFKA330UAR (5) 2000
5 5.8 C 160 0.70 0.19 EEEFK1A330AR (5) 1000
150 6.3 5.8 D 240 0.36 0.19 EEEFK1A151AP (5) 1000
220 6.3 7.7 D8 280 0.34 0.19 EEEFKA221XAP (5) 900
8 6.2 E 300 0.26 0.19 EEEFK1A221AP (6) 1000
330 8 10.2F 6000.160.19
EEEFK1A331AP (6) 500
470 8 10.2F 6000.160.19
EEEFK1A471AP (6) 500
680 8 10.2F6000.160.19
EEEFK1A681AP (6) 500
1000 10 10.2 G 850 0.08 0.19 EEEFK1A102AP (6) 500
16
10 45.8B901.350.16
EEEFK1C100AR (5) 2000
22 4 5.8 (B) 90 1.35 0.16 EEEFKC220UAR (5) 2000
5 5.8 C 160 0.70 0.16 EEEFK1C220AR (5) 1000
47 5 5.8 (C) 160 0.70 0.16 EEEFKC470UAR (5) 1000
6.3 5.8 D 240 0.36 0.16 EEEFK1C470AP (5) 1000
68 6.3 5.8 D 240 0.36 0.16 EEEFK1C680AP (5) 1000
100 6.3 5.8 D 240 0.36 0.16 EEEFK1C101AP (5) 1000
150 6.3 7.7 D8 280 0.34 0.16 EEEFKC151XAP (5) 900
220 6.3 7.7 D8 280 0.34 0.16 EEEFKC221XAP (5) 900
8 6.2 E 300 0.26 0.16 EEEFK1C221AP (6) 1000
330 8 10.2F 6000.160.16
EEEFK1C331AP (6) 500
470 8 10.2F 6000.160.16
EEEFK1C471AP (6) 500
680 10 10.2 G 850 0.08 0.16 EEEFK1C681AP (6) 500
25
10 45.8B901.350.14
EEEFK1E100AR (5) 2000
22 5 5.8 C 160 0.70 0.14 EEEFK1E220AR (5) 1000
33 5 5.8 (C) 160 0.70 0.14 EEEFKE330UAR (5) 1000
6.3 5.8 D 240 0.36 0.14 EEEFK1E330AP (5) 1000
47 6.3 5.8 D 240 0.36 0.14 EEEFK1E470AP (5) 1000
68 6.3 5.8 D 240 0.36 0.14 EEEFK1E680AP (5) 1000
100 6.3 7.7 D8 280 0.34 0.14 EEEFKE101XAP (5) 900
8 6.2 E 300 0.26 0.14 EEEFK1E101AP (6) 1000
150 8 10.2F6000.160.14
EEEFK1E151AP (6) 500
220 8 10.2F6000.160.14
EEEFK1E221AP (6) 500
330 8 10.2F 6000.160.14
EEEFK1E331AP (6) 500
470 10 10.2 G 850 0.08 0.14 EEEFK1E471AP (6) 500
35
4.7 4 5.8 B 90 1.35 0.12 EEEFK1V4R7AR (5) 2000
10 4 5.8 (B) 90 1.35 0.12 EEEFKV100UAR (5) 2000
5 5.8 C 160 0.70 0.12 EEEFK1V100AR (5) 1000
22 5 5.8 C 160 0.70 0.12 EEEFK1V220AR (5) 1000
33 6.3 5.8 D 240 0.36 0.12 EEEFK1V330AP (5) 1000
47 6.3 5.8 D 240 0.36 0.12 EEEFK1V470AP (5) 1000
68 6.3 7.7 D8 280 0.34 0.12 EEEFKV680XAP (5) 900
100 6.3 7.7 D8 280 0.34 0.12 EEEFKV101XAP (5) 900
8 10.2 F 600 0.160.12
EEEFK1V101AP (6) 500
150 8 10.2F6000.160.12
EEEFK1V151AP (6) 500
220 8 10.2F6000.160.12
EEEFK1V221AP (6) 500
330 10 10.2 G 850 0.08 0.12 EEEFK1V331AP (6) 500
Size code( ):Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0JJ, 1AA, 1CC, 1EE, 1VV
The taping dimensions are explained on EE188 of our Catalog. Please use it as a ref er ence guide.
Refl ow Profi le(Fig-1 to Fig-11) listed on EE186 of our Catalog.
Endurance : 105 °C 2000 h
Sep. 201000