MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069A - FEBRUARY 1971 - REVISED MAY1999 D D D D MC1458 . . . D OR P PACKAGE MC1558 . . . JG PACKAGE Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable With Motorola MC1558/MC1458 and Signetics S5558/N5558 (TOP VIEW) 1OUT 1IN - 1IN+ VCC- NC 1OUT 1IN - 1IN+ VCC - The MC1458 and MC1558 are dual generalpurpose operational amplifiers, with each half electrically similar to the A741, except that offset null capability is not provided. 7 3 6 4 5 VCC+ 2OUT 2IN - 2IN+ 1 NC VCC+ 2OUT 2IN - 2IN+ 10 2 9 3 8 4 7 5 6 MC1558 . . . FK PACKAGE (TOP VIEW) NC 1OUT NC V CC + NC The high-common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability without external components. NC 1IN - NC 1IN+ NC The MC1458 is characterized for operation from 0C to 70C. The MC1558 is characterized for operation over the full military temperature range of - 55C to 125C. 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC symbol (each amplifier) + OUT - IN - 8 2 MC1558 . . . U PACKAGE (TOP VIEW) description IN + 1 NC 2OUT NC 2IN - NC V CC - NC 2IN+ NC D D NC - No internal connection AVAILABLE OPTIONS PACKAGE TA VIOmax AT 25C SMALL OUTLINE (D) CHIP CARRIER (FK) CERAMIC DIP (JG) PLASTIC DIP (P) CERAMIC FLAT PACK (U) 0C to 70C 6 mV MC1458CD -- -- MC1458CP -- - 55C to 125C 5 mV -- MC1558MFK MC1558MSG -- MC1558MU The D packages are available taped and reeled. Add the suffix R to the device type (i.e., MC1458DR) Copyright 1999, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069A - FEBRUARY 1971 - REVISED MAY1999 schematic (each amplifier) VCC + IN - OUT IN + VCC - absolute maximum ratings over operating free-air temperature range (unless otherwise noted) MC1458 VCC + VCC - Supply voltage (see Note 1) Differential input voltage (see Note 2) Input voltage at either input (see Notes 1 and 3) Duration of output short circuit (see Note 4) Continuous total dissipation 18 22 - 22 30 30 V 15 15 V unlimited unlimited V See Dissipation Rating Table Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds JG or U package Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package Storage temperature range 260 C 300 C C 260 65 to 150 - 65 to 150 C All voltage values, unless otherwise noted, are with respect to the midpoint between VCC + and VCC - . Differential voltages are at IN+ with respect to IN -. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. The output can be shorted to ground or either power supply. For the MC1558 only, the unlimited duration of the short circuit applies at (or below) 125C case temperature or 70C free-air temperature. DISSIPATION RATING TABLE 2 UNIT - 18 Case temperature for 60 seconds: FK package NOTES: 1. 2. 3. 4. MC1558 PACKAGE TA 25C POWER RATING DERATING FACTOR D FK JG P U 680 mW 680 mW 680 mW 680 mW 675 mW 5.8 mW/C mW/ C 11.0 mW/C 8.4 mW/C 8.0 mW/C 5.4 mW/C POST OFFICE BOX 655303 DERATE ABOVE TA 33C 33 C 88C 69C 65C 25C * DALLAS, TEXAS 75265 TA = 70C POWER RATING TA = 125C POWER RATING 464 mW 880 mW 672 mW 640 mW 432 mW -- 275 mW 210 mW -- 135 mW MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069A - FEBRUARY 1971 - REVISED MAY1999 recommended operating conditions Supply voltage, VCC Operating free-air free air temperature range, range TA MIN MAX UNIT 5 15 V MC1458 0 70 MC1558 -55 125 C electrical characteristics at specified free-air temperature, VCC = 15 V VIO Input offset voltage VO = 0 IIO Input offset current VO = 0 IIB Input bias current VO = 0 VICR Common-mode input voltage range VOM Maximum peak output voltage swing MIN 25C 1 25C 20 80 Full range 25C 12 Full range 12 25C 12 Full range 12 RL = 2 k 25C 10 RL 2 k Full range 10 25C 20 Full range 15 BOM Maximum-output-swing bandwidth (closed loop) RL = 2 k, AVD = 1, VO 10 V, THD 5% 25C Unity-gain bandwidth AVD = 1 Gain margin ri Input resistance ro Output resistance Ci Input capacitance zic Common-mode input impedance f = 20 Hz CMRR Common-mode rejection ratio VIC = VICR min,, VO = 0 kSVS Supply-voltage sensitivity (VIO/VCC) VCC = 9 V to 15 V,, VO = 0 Vn Equivalent input noise voltage (closed loop) AVD = 100, f = 1 kHz, See Note 5 MAX 1 5 6 200 20 500 13 200 500 80 500 1500 12 13 14 12 10 mV nA nA 14 12 13 UNIT V 12 V 13 10 200 50 200 V/mV 25 14 14 kHz 1 1 MHz 25C 65 65 deg 25C 11 11 dB 2 M 0.3 2 0.3* 25C 75 75 25C 1.4 1.4 pF 25C 200 200 M 25C 70 Full range 70 25C 90 25C 70 90 dB 70 30 Full range RS = 0, BW = 1 Hz 6 TYP 25C 25C VO = 0, MIN 800 RL = 10 k RL 10 k VO = 10 V MAX 300 25C RL 2 k, MC1558 7.5 Full range Large-signal g g differential voltage amplification Phase margin TYP Full range AVD B1 m MC1458 TEST CONDITIONS PARAMETER 150 30 150 45 150 V/V 150 45 nV/Hz *On products compliant to MIL-PRF-38535, this parameter is not production tested. All characteristics are specified under open-loop operating conditions with zero common-mode input voltage unless otherwise specified. Full range for MC1458 is 0C to 70C and for MC1558 is - 55C to 125C. NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effect of drift and thermal feedback. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069A - FEBRUARY 1971 - REVISED MAY1999 electrical characteristics at specified free-air temperature, VCC = 15 V (continued) MC1458 TEST CONDITIONS PARAMETER MIN MC1558 TYP MAX MIN TYP MAX Short-circuit output current 25C 25 40 25 40 ICC Supply y current ((both amplifiers) VO = 0 0, No load 25C 3.4 5.6 3.4 5 PD Total power dissipation (both amplifiers) VO = 0 0, No load IOS Full range 6.6 25C 100 Full range 6.6 170 100 200 150 200 UNIT mA mA mW VO1/VO2 Crosstalk attenuation 25C 120 120 dB All characteristics are specified under open-loop operating conditions with zero common-mode input voltage unless otherwise specified. Full range for MC1458 is 0C to 70C and for MC1558 is - 55C to 125C. operating characteristics, VCC = 15 V, TA = 25C PARAMETER tr Rise time Overshoot factor SR MC1458 TEST CONDITIONS Slew rate at unity gain MIN VI = 20 mV,, CL = 100 pF, RL = 2 k,, See Figure 1 VI = 10 V, CL = 100 pF, RL = 2 k, See Figure 1 TYP MC1558 MAX MIN TYP 0.3 0.3 5% 5% 05 0.5 05 0.5 PARAMETER MEASUREMENT INFORMATION VI - Output + Input 0V Input Voltage Waveform CL = 100 pF RL = 2 k Test Circuit Figure 1. Rise-Time, Overshoot, and Slew-Rate Waveform and Test Circuit 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MAX UNIT s V/s IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright 1999, Texas Instruments Incorporated