INCH-POUND MIL-DTL-83723/78E 19 August 2009 SUPERSEDING MIL-DTL-83723/78D 15 September 2006 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PLUG, (RFI, BAYONET COUPLING, CRIMP PIN CONTACT), (SERIES III, CLASSES G, M, R, T, W, AND Z) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Dimensions and configurations. AMSC N/A FSC 5935 MIL-DTL-83723/78E FIGURE 1. Dimensions and configurations - Continued. 2 MIL-DTL-83723/78E Shell size A max G min H J L min U max V 8 .312 .352 .415 .424 .540 .545 .632 .776 .025 10 .388 .428 .517 .526 .662 .667 .760 .906 .031 12 .558 .598 .687 .696 .832 .837 .930 1.078 .031 14 .627 .667 .756 .765 .901 .906 .999 1.141 .031 16 .772 .794 .883 .892 1.028 1.033 1.126 1.266 .031 18 .860 .900 .989 .998 1.134 1.139 1.232 1.375 .031 20 .985 1.025 1.114 1.123 1.261 1.266 1.357 1.510 .031 22 1.110 1.150 1.239 1.248 1.384 1.389 1.482 1.625 .031 24 1.235 1.275 1.364 1.373 1.511 1.516 1.607 1.760 .031 FIGURE 1. Dimensions and configurations - Continued. 3 MIL-DTL-83723/78E Inches .008 .015 .018 .020 .022 .025 .031 .032 .042 .046 .065 .069 .090 .097 .101 .106 .112 .125 .138 .144 .170 mm 0.20 0.38 0.48 0.51 0.56 0.64 0.79 0.81 1.07 1.17 1.65 1.75 2.29 2.46 2.57 2.69 2.84 3.18 3.51 3.66 4.32 Inches .177 .182 .185 .200 .204 .259 .312 .316 .320 .330 .352 .366 .383 .388 .415 .424 .428 .517 .526 .540 .545 mm 4.50 4.62 4.70 5.08 5.18 6.58 7.92 8.03 8.13 8.38 8.94 9.30 9.73 9.86 10.54 10.77 10.87 13.13 13.36 13.72 13.84 Inches .552 .558 .598 .627 .632 .662 .667 .678 .687 .696 .756 .760 .765 .772 .776 .794 .832 .837 .860 .883 .892 mm 14.20 14.17 15.19 15.93 16.05 16.81 16.94 17.22 17.45 17.68 19.20 19.30 19.43 19.61 19.71 20.17 21.13 21.26 21.84 22.43 22.66 Inches .900 .901 .906 .930 .985 .989 .998 .999 1.025 1.028 1.033 1.078 1.110 1.114 1.123 1.126 1.134 1.139 1.141 1.150 1.230 mm 22.86 22.89 23.01 23.62 25.02 25.12 25.35 25.37 26.04 19.84 26.24 27.38 28.19 28.30 28.52 28.60 28.80 28.93 28.98 29.21 31.24 Inches 1.232 1.235 1.239 1.248 1.261 1.266 1.275 1.357 1.373 1.375 1.384 1.389 1.482 1.510 1.511 1.516 1.607 1.625 1.760 mm 31.29 31.37 31.47 31.70 32.03 32.16 32.39 34.47 34.87 34.93 35.15 35.28 37.64 38.35 38.38 38.51 40.82 41.28 44.70 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals and .01 (0.25 mm) for two place decimals and 1o for all angles. 4. Rear accessory interchangeability dimensions shall be in accordance with MIL-DTL-83723. 5. See table I for contact cavities requiring this dimension. FIGURE 1. Dimensions and configurations - Continued. 4 MIL-DTL-83723/78E REQUIREMENTS: Dimensions and configurations: See figure 1. For insert arrangements, see MIL-STD-1554 and table I. TABLE I. Inserts requiring reduced diameters for raised seal barriers on contact cavities. Shell size Insert arrangements Contact cavities 8 03 1, 2, 3 10 06 1, 2, 3, 4, 5, 6 For connector accessories, see SAE-AS85049. This connector mates with MIL-DTL-83723/71 and MIL-DTL-83723/73. Mating force: Shall not exceed the values specified in the procurement document by more than 20 percent. RFI spring strip shall have a minimum of six fingers per inch and shall point to rear of connector. Part or Identifying Number (PIN) example: M83723/ 78 W Military designation Specification sheet number Class Shell size Insert arrangement Polarizing position 5 22 55 N MIL-DTL-83723/78E Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MIL-DTL-83723/71 MIL-DTL-83723/73 MIL-STD-1554 SAE-AS85049 CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC Review activities: Army - AR, MI Navy - EC Air Force - 19, 99 (Project 5935-2008-160) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil. 6