311
www.glenair.com E-Mail: sales@glenair.com
Series 311 - Page 2
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324
CONNECTOR
DESIGNATORS
A-F-H
J-L-S
ROTATABLE
COUPLING
A Thread
(Table I)
C
(Table I)
J (Table IV)
E
(Table III)
Cable
Entry
F (Table III)
STYLE 2
(45° & 90°
See Note 5)
.88 (22.4)
Max
311 F A 001 M 16 03 E T
Product Series
Connector Designator
Angle and Profile
A = 90°
B = 45°
S = Straight
Basic Part No.
Shrink Boot (Table IV -
Omit for none)
E = S train Relief
(Omit for nut)
Cable Entry (Table IV)
Shell Size (Table I)
Finish (T able II)
311-001
Lamp-Base Thread EMI/RFI Shrink Boot Adapter
with Strain Relief and Optional Shrink Boot
Rotatable Coupling - Low Profile
Cable
Entry
1.25
(31.8)
Max
K
(Table
IV)
J
(Table
IV)
O-Ring
Cable
Entry
A Thread
(Table I)
C (Table I)
STYLE 2
(STRAIGHT
See Note 5)
1.75
(44.5)
Max
G
(Table III)
J
(Table IV)
Cable
Entry
H
(Table III)
C
(Table I)
STYLE E
STRAIN RELIEF
311
www.glenair.com E-Mail: sales@glenair.com
Series 311 - Page 3
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324
TABLE III: DIMENSIONS
1. Cable Entry is defined as the accomodation range for the wire bundle
or cable. Dimensions shown are not intended for inspection criteria.
2. See Shrink Boot Reference Information (page 40).
3. Metric dimensions (mm) are indicated in parentheses.
4. O-Rings not supplied with Connector Designator A.
5. When maximum entry (page 21) is exceeded, Style 2 will be supplied.
Dimensions E, F, G & H will not apply. Please consult factory.
A-F-J-L-S
08
10
12
14
16
18
20
22
24
28
32
36
H
09
11
13
15
17
19
21
23
25
E
Max
.457 (11.6)
.520 (13.2)
.582 (14.8)
.645 (16.4)
.738 (18.7)
.926 (23.5)
.926 (23.5)
1.020 (25.9)
1.020 (25.9)
1.145 (29.1)
1.207 (30.7)
1.238 (31.4)
F
Max
1.630 (41.4)
1.690 (42.9)
1.750 (44.5)
1.840 (46.7)
1.950 (49.5)
2.140 (54.4)
2.140 (54.4)
2.290 (58.2)
2.290 (58.2)
2.340 (59.4)
2.440 (62.0)
2.530 (64.3)
SHELL SIZE H
Max
1.640 (41.7)
1.760 (44.7)
1.780 (45.2)
1.850 (47.0)
1.940 (49.3)
2.110 (53.6)
2.110 (53.6)
2.220 (56.4)
2.220 (56.4)
2.390 (60.7)
2.640 (67.1)
2.640 (67.1)
G
Max
.500 (12.7)
.595 (15.1)
.610 (15.5)
.700 (17.8)
.885 (22.5)
.975 (24.8)
.975 (24.8)
1.125 (28.6)
1.125 (28.6)
1.225 (31.1)
1.575 (40.0)
1.775 (45.1)
See inside back cover fold-out
or pages 13 and 14
for unabridged Tables I and II.
Dash
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
J
Max
.448 (11.4)
.515 (13.1)
.640 (16.3)
.765 (19.4)
.920 (23.4)
1.015 (25.8)
1.140 (29.0)
1.265 (32.1)
1.432 (36.4)
1.515 (38.5)
1.640 (41.7)
1.765 (44.8)
2.015 (51.2)
Shrink
Boot
n/a
770-001S103
770-001S103
770-001S104
770-001S104
770-001S105
770-001S106
770-001S106
770-001S107
770-001S107
770-001S108
770-001S108
770-001S108
Cable Entry
Max
.125 (3.2)
.250 (6.4)
.375 (9.5)
.500 (12.7)
.625 (15.9)
.750 (19.1)
.875 (22.2)
1.000 (25.4)
1.125 (28.6)
1.250 (31.8)
1.375 (34.9)
1.500 (38.1)
1.750 (44.5)
TABLE IV: CABLE ENTRY AND SHRINK BOOT
K
Max
.781 (19.8)
.968 (24.6)
1.046 (26.6)
1.156 (29.4)
1.219 (31.0)
1.343 (34.1)
1.469 (37.3)
1.594 (40.5)
1.719 (43.7)
1.844 (46.8)
n/a
n/a
n/a
TABLE II - STANDARD FINISHES
See Inside Back Cover for Complete Finish
Information and Additional Finish Options
GLENAIR
SYMBOL
B
M
NF
FINISH
Cadmium Plate, Olive Drab
Electroless Nickel
Cadmium Plate, Olive Drab Over
Electroless Nickel
311-001
Lamp-Base Thread EMI/RFI Shrink Boot Adapter
with Strain Relief and Optional Shrink Boot
Rotatable Coupling - Low Profile
How
to Order
www.glenair.com E-Mail: sales@glenair.com
14
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2005 Glenair, Inc. Printed in U.S.A.CAGE Code 06324
NOTE: For your convenience these tables have
been reproduced inside the back cover fold-out.
Reference Information
Standard Materials and Finishes
COMPONENT
Machined components: such as backshell bodies, fabricated elbows, protective covers,
rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings,
EMI ground rings, grommet followers, etc.
Die cast components: such as angular backshells, strain relief backshells, strain relief
bodies, strain relief saddles, special EMI ground rings, etc.
Backshells or strain reliefs: available in optional corrosion resisting steel; and
hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc.
Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc.
Anti-friction and thrust washers
Anti-rotation device
MATERIAL
Aluminum
Aluminum
Corrosion Resisting Steel
Silicone
Teflon
Corrosion Resistant
Material
SPECIFICATION
AMS-QQ-A-200
ASTMB221, 209
QQ-A-591
ASTMB85, 26
ASTMA582 (300 Series)
AMS-QQ-S-763
ZZ-R-765, MIL-R-25988
TFE
N/A
STANDARD MATERIALS - BACKSHELLS AND ACCESSORIES
BODY STRAP On all length callouts, tolerance is ± .060 unless otherwise
specified.
Unless otherwise specified, the following other dimensional
tolerances will apply:
.xx = ± .03 (0.8)
.xxx = ± .015 (0.4)
Lengths = ± .060 (1.52)
Angles = ± 5°
Metric dimensions (mm) are indicated in parentheses
Glenair offers an optional stainless steel body strap for
attaching protective covers as illustrated. To specify body
strap, add suffix letter C to the end of the part number. For
example 360AS001M1610M6C.
NOTES
2-56 Screw and Nut
The following standard materials are used for the majority of Glenair
backshells and connector accessories. However, backshell compo-
nents are not limited to those items listed, but are representative of
the elements used in Glenair's general accessory products. Contact
Glenair for applicable specifications on items not listed below.
T ABLE II - ST ANDARD FINISHES
* Anodize finish; not suitable for EMI Shielding or grounding applications.
** Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes.
GLENAIR
SYMBOL
A
B
C*
G*
J
LF
M
N
NC
NF
T
U
ZU**
ZN
M85049 SYMBOL
REFERENCE ONL Y
A
N
W
FINISH
Cadmium Plate, Bright
Cadmium Plate, Olive Drab
Anodize, Black
Hard Coat, Anodic
Iridite, Gold Over Cadmium Plate Over
Electroless Nickel
Cadmium Plate, Bright Over
Electroless Nickel
Electroless Nickel
Cadmium Plate, Olive Drab Over
Electroless Nickel
Zinc Cobalt, Dark Olive Drab
Cadmium Plate, Olive Drab Over
Electroless Nickel
Cadmium Plate, Bright Over
Electroless Nickel
Cadmium Plate, Black
Cadmium Plate, Black
Zinc-Nickel Alloy, Olive Drab
SPECIFICATION(S)
AMS-QQ-P-416, Type I, Class 2
AMS-QQ-P-416, Type II, Class 3
AMS-A-8625, Type II, Class 2
AMS-A-8625, Type III, Class 1
MIL-C-5541, Class 3 AMS-QQ-P-416, T ype II,
Class 3 over AMS-C-26074, Class 4, Grade B
1000 Hour Corrosion Resistance
AMS-C-26074, Class 4, Grade B
AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel
AMS-C-26074
96 Hour Corrosion Resistance
1000 Hour Corrosion Resistance
AMS-QQ-P-416, Type I, Class 3
ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074***
AMS-QQ-P-416, Type II, Class 3
AMS-QQ-P-416, Type II, Class 3
ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt
Spray
Glenair Backshell and Accessory Material and Finish Options
Code Material Finish Finish Specication Hrs. Salt
Spray
Electrical
Conductivity
Operating Temp.
Range Notes
AAluminum Cadmium, No Chromate SAE-AMS-QQ-P-416 Type I Class 3 48 Conductive -65 to +175°C Not recommended for new projects. LF is preferred.
AB Marine Bronze Unplated 1000 Conductive -65 to +200°C Marine and geophysical applications.
AL Aluminum AlumiPlate, Clear Chromate MIL-DTL-83488, Class 2, Type II over electroless nickel 1000 Conductive -65 to +175°C Approved for MIL-DTL-38999L and MIL-DTL-83513G.
BAluminum Cadmium, Olive Drab SAE-AMS-QQ-P-416 Type II Class 3 96 Conductive -65 to +175°C Not recommended for new projects. NF is preferred.
CAluminum Anodize, Black AMS-A-8625 Type II Class 2 336 Non-Conductive -65 to +175°C Glenair’s standard black anodize nish.
EAluminum Chem Film MIL-DTL-5541 Type 1 Class 3 168 Conductive -65 to +175°C Glenair’s standard chem lm nish.
GAluminum Anodize, Hardcoat AMS-A-8625 Type III, Class 1, .001" thick 336 Non-Conductive -65 to +200°C Glenair’s preferred hardcoat nish.
JAluminum Cadmium, Gold SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel 500 Conductive -65 to +175°C Not recommended for new projects. JF is preferred.
JF Aluminum Cadmium, Gold SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel 1000 Conductive -65 to +175°C Glenair’s preferred gold cadmium nish.
LF Aluminum Cadmium, Clear SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel 1000 Conductive -65 to +175°C Glenair’s preferred clear cadmium nish.
MAluminum Electroless Nickel AMS-C-26074 Class 4 Grade B; ASTM-B-733, SC 2, Type IV 48 Conductive -65 to +200°C Glenair’s standard electroless nickel nish.
MT Aluminum Nickel-PTFE GMF-002 Type II Class 1 1000 Conductive -65 to +175°C Approved for MIL-DTL-38999L and MIL-DTL-83513G.
NAluminum Cadmium, Olive Drab SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel 500 Conductive -65 to +175°C Not recommended for new projects. NF is preferred.
NC Aluminum Zinc-Cobalt, Olive Drab ASTM B 840 Grade 6 Type D over electroless nickel 350 Conductive -65 to +175°C Glenair’s standard olive drab zinc-cobalt nish.
NF Aluminum Cadmium, Olive Drab SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel 1000 Conductive -65 to +175°C Glenair’s standard olive drab cadmium nish.
PStainless Steel Electrodeposited Nickel SAE-AMS-QQ-N-290 Class 1 Grade F 500 Conductive -65 to +200°C Use ZM for electroless nickel alternative.
TAluminum Cadmium, No Chromate SAE-AMS-QQ-P-416 Type I Class 3 48 Conductive -65 to +175°C Not recommended for new projects. LF is preferred.
TP2 Titanium Electrodeposited Nickel SAE-AMS-QQ-N-290 Class 1 Grade F 96 Conductive -65 to +200°C Glenair’s preferred nish for titanium connectors.
UAluminum Cadmium, Black SAE-AMS-QQ-P-416 Type I Class 3 48 Conductive -65 to +175°C Not recommended for new projects. UF is preferred.
UC Aluminum Zinc-Cobalt, Black ASTM B 840 Grade 6 Type D over electroless nickel 350 Conductive -65 to +175°C Glenair’s standard black zinc-cobalt nish.
UCR Aluminum Zinc-Cobalt, Black ASTM B 840 Grade 6 Type D over electroless nickel 350 Conductive -65 to +175°C RoHS version of UC.
UF Aluminum Cadmium, Black SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel 1000 Conductive -65 to +175°C Glenair’s preferred black cadmium nish.
XAL Composite AlumiPlate MIL-DTL-86448, Class 2, Type II over electroless nickel 2000 Conductive -65 to +175°C Approved for MIL-DTL-38999L.
XB Composite Unplated Black 2000 Non-Conductive -65 to +175°C Glenair’s standard unplated composite.
XM Composite Electroless Nickel AMS-C-26074 2000 Conductive -65 to +175°C Glenair’s standard electroless nickel nish over composite.
XMT Composite Nickel-PTFE GMS-002 Class 2 Type II 2000 Conductive -65 to +175°C Approved for MIL-DTL-38999L.
XO Composite Unplated Light Brown 2000 Non-Conductive -65 to +175°C Not recommended for new projects. Use XB.
XW Composite Cadmium, Olive Drab SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel 2000 Conductive -65 to +175°C Glenair’s standard olive drab cadmium nish over composite.
XZN Composite Zinc-Nickel, Black ASTM B841 Grade 5 over electroless nickel 2000 Conductive -65 to +175°C Glenair’s standard black zinc-nickel nish over composite.
Z1 Stainless Steel Passivate SAE-AMS-SAE-AMS-QQ-P-35 Type VI 1000 Conductive -65 to +200°C Glenair’s standard passivated stainless steel.
Z2 Aluminum Gold MIL-DTL-45204 Class 1 over electroless nickel 48 Conductive -65 to +200°C Glenair’s standard gold plating for space programs.
ZC Stainless Steel Zinc-Cobalt, Black ASTM-B840, Grade 6 Conductive -65 to +175°C Glenair’s standard zinc-cobalt over stainless steel.
ZCR Stainless Steel Zinc-Cobalt, Black ASTM-B840, Grade 6 Conductive -65 to +175°C RoHS version of ZC.
ZL Stainless Steel Electrodeposited Nickel SAE-AMS-QQ-N-290 Class 1 Grade F 1000 Conductive -65 to +200°C Used on hermetic connectors. Use ZM for other applications.
ZM Stainless Steel Electroless Nickel AMS-C-26074 Class 1 Grade A Conductive -65 to +200°C Glenair’s preferred nickel-plated stainless steel.
ZMT Stainless Steel Nickel-PTFE GMF-002 Type II Class 3 1000 Conductive -65 to +175°C Glenair’s new 1000 Hour Grey over stainless steel.
ZN Aluminum Zinc-Nickel, Olive Drab ASTM B841 Grade 5 over electroless nickel 1000 Conductive -65 to +175°C Glenair’s standard olive drab zinc-nickel nish.
ZNU Aluminum Zinc-Nickel, Black ASTM B841 Grade 5 over electroless nickel 1000 Conductive -65 to +175°C Glenair’s standard black zinc-nickel nish.
ZR Aluminum Zinc-Nickel, Black ASTM B841 Grade 5 over electroless nickel 500 Conductive -65 to +175°C Glenair’s RoHs compliant black zinc-nickel.
ZU Stainless Steel Cadmium, Black SAE-AMS-QQ-P-416 Type II Class 3 1000 Conductive -65 to +175°C Glenair’s standard black cadmium over stainless steel.
ZW Stainless Steel Cadmium, Olive Drab SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel 2000 Conductive -65 to +175°C Glenair’s standard olive drab cadmium over stainless steel.
Backshell and accessory base materials, plating options, specications and codes
DESIG. SPEC. SERIES
A MIL-DTL-5015 MS3400
MIL-DTL-264822
AS81703 3
MIL-DTL-83723I & III
40M39569
DEF 5326-3
EN 2997, 3646
ESC 10, 11
LN 29504
NFC93422 HE302
PAN 6432-1, -2
* Code C, MIL-C-22992, Left-Hand Thread. Connector designations depicted thus [ ] are for reference only and are not to be used in part number development.
CONNECTOR DESIGNATOR
BACKSHELL INTERFACE STANDARDS (See pages 15-17 for more information)
T ABLE I - BACKSHELL INTERF ACE DIMENSIONS
DESIG. SPEC. SERIES
L EN3372
JN 1003
LN 29729
NFC93422 HE306
PAN 6433-2
PATT 615
VG 96912
S PATT 105
PATT 603
PATT 608
13
How
to Order
DESIG. SPEC. SERIES
G MIL-C-28840
H MIL-DTL-38999 III & IV
EN3645
J MIL-C-81511 1, 2, 3 & 4
VG95329
K MIL-DTL-83723 II
DESIG. SPEC. SERIES
A PATT 602
B MIL-DTL-5015 MS3100
C MIL-C-22992 MS173XX
D MIL-DTL-264821
E MIL-DTL-26500Aluminum
F MIL-DTL-38999I & II
40M38277
PAN 6433-1
PATT 614
PATT 616
NFC93422 HE308, 9
A
08
03
10
12 [7]
14 [12]
16 [19]
18 [27]
20 [37]
22
24
61
28
32
36
40
44
48
C*
12
14
16
18
20
22
24
28
32
36
40
44
48
D
08
10
12
14
16
18
20
22
24
E
08
10
12
14
16
18
20
22
24
F
08 [9]
10 [11]
12 [13]
14 [15]
16 [17]
18 [19]
20 [21]
22 [23]
24 [25]
G
11 [A]
13 [B]
15 [C]
17 [D]
19 [E]
23 [F]
25 [G]
29 [H]
33 [J]
H
09 [A]
11 [B]
13 [C]
15 [D]
17 [E]
19 [F]
21 [G]
23 [H]
25 [J]
J
08 [A]
10 [B]
14 [D]
16 [E]
18 [F]
20 [G]
22 [H]
24 [J]
K
08
10
11
12 [13]
14 [15]
16 [17]
18
20
22
24
28
32
36
40
L
08
10
12
14
16
18
20
22
24
S
08
10
12
14
16
18
20
22
24
C
DIA MAX
.650 (16.5)
.770 (19.6)
.650 (16.5)
.770 (19.6)
.770 (19.6)
.820 (20.8)
.770 (19.6)
.890 (22.6)
.890 (22.6)
.940 (23.9)
.940 (23.9)
1.020 (29.2)
1.070 (26.2)
1.020 (25.9)
1.150 (29.2)
1.150 (29.2)
1.210 (30.7)
1.210 (30.7)
1.360 (34.5)
1.230 (31.2)
1.360 (34.5)
1.360 (34.5)
1.480 (37.6)
1.360 (34.5
1.480 (37.6)
1.530 (38.9)
1.600 (40.6)
1.480 (37.6)
1.600 (40.6)
1.730 (43.9)
1.730 (43.9)
1.700 (43.2)
1.670 (42.4)
1.940 (49.3)
1.820 (46.2)
1.970 (50.0)
2.190 (55.6)
2.220 (56.4)
2.440 (62.0)
2.47 (62.7)
2.720 (69.1)
2.970 (75.4)
3.220 (81.8)
D
DIA MAX
.770 (19.6)
.770 (19.6)
.890 (22.6)
.890 (22.6)
1.020 (25.9)
1.020 (25.9)
1.150 (29.2)
1.150 (29.2)
1.260 (32.0)
1.230 (31.2)
1.400 (35.6)
1.360 (34.5)
1.530 (38.9)
1.480 (37.6)
1.600 (40.6)
1.600 (40.6)
1.940 (49.3)
1.940 (49.3)
2.190 (55.6)
2.440 (62.0)
2.440 (62.0)
2.690 (68.3)
2.690 (68.3)
2.930 (74.4)
E
DIA MAX
.690 (17.5)
.940 (24.8)
.690 (17.5)
.820 (20.8)
1.060 (26.9)
.820 (20.8)
.940 (23.8)
1.170 (29.7)
.940 (23.8)
1.060 (26.9)
1.290 (32.7)
1.060 (26.9)
1.170 (29.7)
1.420 (36.1)
1.170 (29.7)
1.290 (32.7)
1.540 (39.1)
1.420 (36.0)
1.670 (42.4)
1.540 (39.1)
2.010 (51.1)
1.660 (42.2)
2.120 (53.8)
2.010 (51.1)
2.260 (57.4)
2.530 (64.3)
3.040 (77.2)
B
DIA MAX
.590 (15.)
.650 (16.5)
.650 (16.5)
.650 (16.5)
.720 (18.3)
.770 (19.6)
.770 (19.6)
.770 (19.6)
.840 (21.3)
.890 (22.6)
.970 (24.6)
.970 (24.6)
1.030 (26.2)
1.090 (27.7)
1.030 (26.2)
1.090 (27.7)
1.150 (29.2)
1.220 (29.2)
1.150 (29.2)
1.220 (31.0)
1.280 (32.5)
1.340 (34.0)
1.280 (32.5)
1.340 (34.0)
1.410 (35.8)
1.470 (37.3)
1.410 (35.8)
1.470 (37.3
1.530 (38.9)
1.590 (40.4)
1.530 (38.9)
1.590 (40.4)
1.660 (42.2)
1.660 (42.2)
1.660 (42.2)
1.840 (46.7)
1.970 (50.0)
2.090 (53.1)
2.280 (57.9)
2.340 (59.4)
2.340 (59.4)
2.530 (64.3)
2.590 (65.8)
2.590 (65.8)
2.780 (70.6)
2.910 (73.9)
3.030 (77.0)
3.160 (80.3)
3.220 (81.8)
3.410 (86.6)
A THREAD*
REFERENCE
7/16 – 28 UNEF
M12 x 1 – 6H
1/2 – 20 UNF
1/2 – 28 UNEF
9/16 – 24 UNEF
M15 x 1 – 6H
5/8 – 24 UNEF
5/8 – 28 UN
11/16 – 24 UNEF
M18 x 1 – 6H
3/4 – 20 UNEF
13/16 – 20 UNEF
M22 x 1 – 6H
7/8 – 20 UNEF
7/8 – 28 UN
15/16 – 20 UNEF
M25 x 1 – 6H
1 – 20 UNEF
1 - 28 UN
1 1/16 – 18 UNEF
M28 x 1 – 6H
1 1/8 – 18 UNEF
1 1/8 – 28 UN
1 3/16 – 18 UNEF
M31 x 1 – 6H
1 1/4 – 18 UNEF
1 1.4 – 28 UN
1 5/16 – 18 UNEF
M34 x 1 - 6H
1 3/8 – 18 UNEF
1 3/8 – 28 UN
1 7/16 – 18 UNEF
M37 x 1 – 6H
1 1/2 – 18 UNEF
1 1/2 – 28 UN
1 9/16 – UNEF
1 5/8 – UNEF
1 3/4 – 18 UNS
1 7/8 – 16 UN
2 – 18 UNS
2 1/16 – 16 UNS
2 1/8 – 16 UN
2 1/4 – 16 UN
2 5/16 – 16 UNS
2 3/8 – 16 UN
2 1/2 – 16 UN
2 5/8 – 16 UN
2 3/4 – 16 UN
2 7/8 – 16 UN
3 – 16 UN
3 1/16 – 16 UN