RNX Vishay Dale Metal Oxide Resistors, Special Purpose, High Voltage FEATURES * Low TC: 200 ppm/C standard. 100 ppm/C, 50 ppm/C available. * 1 % standard to 1 G; 5 % above 1 G 0.5 % available in 50 ppm/C only. Special tolerance and/or temperature coefficient matching available. * High Voltage (up to 8 kV) * For oil bath or open air operation Available e3 RoHS* COMPLIANT * Matched sets available * Special testing available upon request * Lead (Pb)-free version is RoHS compliant STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL RNX025 POWER RATING RNX-1/4 P25 C W** 0.5 P70 C W** 0.36 P125 C W** 0.25 RNX038 RNX-3/8 1.0 0.72 0.5 RNX050 RNX-1/2 1.2 0.86 0.6 RNX075 RNX-3/4 2.0 1.44 1.0 RNX100 RNX-1 2.5 1.8 1.25 RESISTANCE RANGE *** VOLTAGE RATING V 200 ppm 100 ppm 50 ppm 750 V 1K - 100M 1K - 100M 1M-22M 100R-100K 1.5 kV 1K - 1G 1K - 100M 1M-50M 100R-100K 2 kV 1K - 2G 1K - 250M 1M-100M 100R-100K 3 kV 1K - 2G 1K - 500M 1M-100M 100R-100K 4 kV 1K - 2G 1K - 500M 1M-100M 100R-1M NON-INDUCTIVE **** RNX125 RNX-1-1/4 3.0 2.16 1.5 5 kV 1K - 2G 1K - 500M - 100R-1M RNX150 RNX-1-1/2 4.0 2.88 2.0 6 kV 1K - 2G 1K - 500M - 100R-1M RNX200 RNX-2 5.0 3.6 2.5 8 kV 1K - 2G 1K - 500M - 100R-1M NOTE: ** Increase wattage by 25 % for 0.032" [0.813 mm] diameter leads. *** For resistance values above and below those listed please contact us. **** Non inductive 200 ppm/C TC only. * All resistance values are calibrated at 100 VDC. Calibration at other voltages available * Part Marking: print marked - DALE, Model, Value, Tolerance, TC, Date Code (Model and Date omitted on RNX-1/4) * Special Modifications: - Special preconditioning (power aging, temperature cycling etc.) to customer specifications - Non-helixed resistors can be supplied for critical high frequency applications. (Non-inductive). GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RNX05010K0KKLB (preferred part numbering format) R GLOBAL MODEL (see Standard Electrical Specifications table) N X RESISTANCE VALUE R = Decimal K = Thousand M = Million G = Billion 910R = 910 10M0 = 10 M 1G00 = 1.0 G 0 5 0 1 0 K 0 K K L B TOLERANCE TEMP. PACKAGING** CODE COEFFICIENT D = 0.5 % H = 50 ppm EL = Lead (Pb)-free, Lacer K = 100 ppm EB = Lead (Pb)-free, T/R (1000 pcs) F=1% N = 200 ppm EE = Lead (Pb)-free, T/R (1000 pcs) G=2% J=5% LB = Tin/Lead, Lacer R6 = Tin/Lead, T/R (1000 pcs) K = 10 % RC = Tin/Lead, T/R (1000 pcs) RF = Tin/Lead, T/R (1000 pcs) CONSTRUCTION SPECIAL Blank = Standard N = Non-inductive P = 0.032" O leads Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable Historical Part Number example: RNX-1/210K0KK (will continue to be accepted) RNX-1/2 HISTORICAL MODEL CONSTRUCTION 10K0 K K L05 RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING NOTE: ** Some packaging codes are model specific. * Pb containing terminations are not RoHS compliant, exemptions may apply. www.vishay.com 150 For technical questions, contact: ff2aresistors@vishay.com Document Number:31032 Revision: 30-Aug-06 RNX Metal Oxide Resistors, Special Purpose, High Voltage DIMENSIONS DIMENSIONS in inches [millimeters] GLOBAL MODEL L L1Max RNX025 0.290 0.020 [7.37 0.51] 0.358 [9.09] RNX038 0.420 0.020 [10.67 0.51] 0.470 [11.94] RNX050 0.540 0.020 [13.72 0.51] 0.595 [15.11] RNX075 0.790 0.020 [20.07 0.51] 0.845 [21.46] RNX100 1.040 0.020 [26.42 0.51] 1.100 [27.81] RNX125 1.290 0.020 [32.77 0.51] 1.350 [34.16] RNX150 1.540 0.020 [39.12 0.51] 1.600 [40.51] RNX200 2.040 0.020 [51.82 0.51] 2.100 [53.34] 0.025 0.002* [0.64 0.05] 1.50 0.125 [38.10 3.18] L L1 Max. 0.140 + 0.015 - 0.010 [3.56 + 0.38 - 0.25] * Available with 0.032" [0.813 mm] leads 0.002" [0.051 mm]. Vishay Dale TECHNICAL SPECIFICATIONS PARAMETER UNIT RNX025 RNX038 RNX050 RNX075 RNX100 1011 Category Temperature Range C - 55/+ 155 % RATED POWER Insulation Resistance RNX125 RNX150 RNX200 120 100 80 FLAMEPROOF COATING 60 40 EPOXY 20 0 25 75 DERATING 125 150 175 225 AMBIENT TEMPERATURE IN C MATERIAL SPECIFICATIONS Element: High temperature fired cermet film Core: High purity 96 % alumina Coating: Epoxy on RNX025 and RNX038 Flameproof on RNX050 to RNX200 Termination: Standard lead material is solder coated copper. Solderable and weldable. Document Number:31032 Revision: 30-Aug-06 MECHANICAL SPECIFICATIONS Terminal Strength: 5 pound pull test Solderability: Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 151 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1