SPEC NO: DSAA5217 REV NO: V.2 DATE:FEB/16/2003 PAGE: 1 OF 4
APPROVED : J. Lu CHECKED :Allen Liu DRAWN:S.J.HOU
Description
The High Efficiency Red source color devices are made
with Gallium Arsenide Phosphide on Gallium Phosphide
Orange Light Emitting Diode.
SUBMINIATURE SOLID STATE LAMP
KM2520EC09 HIGH EFFICIENCY RED
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
Features
!SUBMINIATURE PACKAGE.
!WIDE VIEWING ANGLE.
!Z-BEND LEAD.
!LONG LIFE - SOLID STATE RELIABILITY.
!LOW PACKAGE PROFILE.
!PACKAGE : 1000PCS / REEL.
SPEC NO: DSAA5217 REV NO: V.2 DATE:FEB/16/2003 PAGE: 2 OF 4
APPROVED : J. Lu CHECKED :Allen Liu DRAWN:S.J.HOU
Electrical / Optical Characteristics at TA=25°°
°°
°C
Absolute Maximum Ratings at TA=25°°
°°
°C
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL )dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI Am02@ gniweiVgniweiV gniweiV gniweiVgniweiV elgnA
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT 2/1θ22/1θ2 2/1θ2 2/1θ22/1θ2
90CE0252MK)PaG/PsAaG(DERYCNEICIFFEHGIHRAELCRETAW0107°02
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePdeRycneiciffEhgiH726mnI
F
Am02=
λDhtgnelevaWetanimoDdeRycneiciffEhgiH526mnI
F
Am02=
∆λ 2/1 htdiw-flaHeniLlartcepSdeRycneiciffEhgiH54mnI
F
Am02=
CecnaticapaCdeRycneiciffEhgiH51FpV
F
zHM1=f;V0=
V
F
egatloVdrawroFdeRycneiciffEhgiH0.25.2V I
F
Am02=
I
R
tnerruCesreveRdeRycneiciffEhgiH01AuV
R
V5=
retemaraPretemaraP retemaraP retemaraPretemaraP deRycneiciffEhgiHdeRycneiciffEhgiH deRycneiciffEhgiH deRycneiciffEhgiHdeRycneiciffEhgiHstinUstinU stinU stinUstinU
noitapissidrewoP 501Wm
tnerruCdrawroFCD 03Am
]1[tnerruCdrawroFkaeP 061Am
egatloVesreveR 5V
erutarepmeTegarotS/gnitarepO 04- °58+oTC °C
SPEC NO: DSAA5217 REV NO: V.2 DATE:FEB/16/2003 PAGE: 3 OF 4
APPROVED : J. Lu CHECKED :Allen Liu DRAWN:S.J.HOU
High Efficiency Red KM2520EC09
SPEC NO: DSAA5217 REV NO: V.2 DATE:FEB/16/2003 PAGE: 4 OF 4
APPROVED : J. Lu CHECKED :Allen Liu DRAWN:S.J.HOU
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
KM2520EC09
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
