X7R Dielectric General Specifications X7R formulations are called "temperature stable" ceramics and fall into EIA Class II materials. X7R is the most popular of these intermediate dielectric constant materials. Its temperature variation of capacitance is within 15% from -55C to +125C. This capacitance change is non-linear. Capacitance for X7R varies under the influence of electrical operating con-ditions such as voltage and frequency. X7R dielectric chip usage covers the broad spectrum of industrial applications where known changes in capacitance due to applied voltages are acceptable. PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION) 0805 5 103 M A T 2 A Size (L" x W") Voltage 4V = 4 6.3V = 6 10V = Z 16V = Y 25V = 3 50V = 5 100V = 1 200V = 2 500V = 7 Dielectric X7R = C Capacitance Code (In pF) 2 Sig. Digits + Number of Zeros Capacitance Tolerance J = 5%* K = 10% M = 20% Failure Rate A = Not Applicable Terminations T = Plated Ni and Sn Z= FLEXITERM(R)** Packaging 2 = 7" Reel 4 = 13" Reel *Optional termination Contact Factory For Multiples Special Code A = Std. Product *1F only, contact factory for additional values **See FLEXITERM(R) X7R section NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values. 18 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 100819 X7R Dielectric Specifications and Test Methods Parameter/Test Operating Temperature Range Capacitance Dissipation Factor Insulation Resistance Dielectric Strength Resistance to Flexure Stresses Appearance Capacitance Variation Dissipation Factor Insulation Resistance Solderability Appearance Capacitance Variation Resistance to Solder Heat Thermal Shock Load Life Load Humidity X7R Specification Limits -55C to +125C Within specified tolerance 10% for 50V DC rating 12.5% for 25V DC rating 12.5% for 25V and 16V DC rating 12.5% for 10V DC rating Contact Factory for DF by PN Charge device with rated voltage for 120 5 secs @ room temp/humidity No breakdown or visual defects Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Note: Charge device with 150% of rated voltage for 500V devices. No defects 12% Meets Initial Values (As Above) Deflection: 2mm Test Time: 30 seconds Initial Value x 0.3 95% of each terminal should be covered with fresh solder No defects, <25% leaching of either end terminal Dip device in eutectic solder at 230 5C for 5.0 0.5 seconds 7.5% Meets Initial Values (As Above) Insulation Resistance Meets Initial Values (As Above) Dielectric Strength Meets Initial Values (As Above) Dielectric Strength Freq.: 1.0 kHz 10% Voltage: 1.0Vrms .2V For Cap > 10F, 0.5Vrm @ 120Hz 100,000M or 1000M - F, whichever is less Dissipation Factor Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Dielectric Strength Appearance Capacitance Variation Dissipation Factor Insulation Resistance Measuring Conditions Temperature Cycle Chamber No visual defects Dip device in eutectic solder at 260C for 60 seconds. Store at room temperature for 24 2hours before measuring electrical properties. Step 1: -55C 2 30 3 minutes 7.5% Step 2: Room Temp 3 minutes Meets Initial Values (As Above) Step 3: +125C 2 30 3 minutes Meets Initial Values (As Above) Step 4: Room Temp 3 minutes Meets Initial Values (As Above) No visual defects 12.5% Initial Value x 2.0 (See Above) Initial Value x 0.3 (See Above) Meets Initial Values (As Above) Repeat for 5 cycles and measure after 24 2 hours at room temperature Charge device with rated voltage in test chamber set at 125C 2C for 1000 hours (+48, -0). Remove from test chamber and stabilize at room temperature for 24 2 hours before measuring. Contact AVX for datasheet of specific parts. No visual defects 12.5% Initial Value x 2.0 (See Above) Initial Value x 0.3 (See Above) Meets Initial Values (As Above) Store in a test chamber set at 85C 2C/ 85% 5% relative humidity for 1000 hours (+48, -0) with rated voltage applied. Remove from chamber and stabilize at room temperature and humidity for 24 2 hours before measuring. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 121720 19 X7R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 0101* Soldering Packaging (L) Length W) Width (t) Terminal WVDC 100 150 220 330 470 680 1000 1500 2200 3300 3900 4700 5600 6800 Cap 0.01 (F) 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.068 0.082 0.1 0.12 0.15 0.22 0.33 0.47 0.68 1.0 2.2 4.7 10 22 47 100 WVDC Cap (pF) mm (in.) mm (in.) mm (in.) 101 151 221 331 471 681 102 152 222 332 392 472 562 682 103 123 153 183 223 273 333 393 473 683 823 104 124 154 224 334 474 684 105 225 475 106 226 476 107 SIZE Letter Max. Thickness 0201 Reflow Only Reflow Only Paper/ All Paper Embossed 0.40 0.02 0.60 0.09 (0.016 0.0008) (0.024 0.004) 0.20 0.02 0.30 0.09 (0.008 0.0008) (0.011 0.004) 0.10 0.04 0.15 0.05 (0.004 0.0016) (0.006 0.002) 16 6.3 10 16 25 B A A A A B A A A A B A A A A B A A A A B A A A A B A A A A B A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 0402 0603 0805 1206 Reflow/Wave Reflow/Wave Reflow/Wave Reflow/Wave All Paper Paper/Embossed Paper/Embossed All Paper 50 A A A A A A A 6.3 C C C C C C C C C C A A 1.00 0.10 (0.040 0.004) 0.50 0.10 (0.020 0.004) 0.25 0.15 (0.010 0.006) 10 16 25 50 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C 1.60 0.15 (0.063 0.006) 0.81 0.15 (0.032 0.006) 0.35 0.15 (0.014 0.006) 100 6.3 10 16 25 50 100 200 250 C G G G G G G J J C G G G G G G J J C G G G G G G J J C G G G G G G J J C G G G G G G J J C G G G G G G J J C G G G G G G J J C G G G G G G J J C G G G G G G J J C G G G G G G J J 16 6.3 10 16 25 50 10 E E J J J J J J J E J J J J J J J E J J J J J J J E J J J J J J J E J J J J J J J 3.20 0.30 (0.126 0.012) 1.60 0.30 (0.063 0.012) 0.50 0.25 (0.020 0.010) 200 250 6.3 10 16 25 50 100 200 250 500 G G N N N G G G G G G N N N E J J J J J J J N N P J J J J J J J J N N P J J J J J J J J N N P J J J J J J J J N N P J J J J J J J J N N P J J J J J J J J N N P J J J J J J J J N N P J J J J J J J J N N P C C C C C C G G G G G G J J J J J J J J J J J J J J J N N P C C C C C C C C C C C C G G G G G G G G G G G G J J J J J J J J J J J J J J P P P P J J J J J J J J J J J J N N N N P P C C C C E G G G G G J J J J J J J J P P J J J J J J N N Q C C C C E G G G G G J J J J J J J J P P J J J J J J P P Q C C C C E G G G G J J J J J J J P P P J J J J J J Q Q Q C C C C C C C C E E G G G G G G G G J J J J J J J J J J J J J J P P P P P J J J J J J J J J J J P Q Q Q Q Q C C C C E G G G G J J J J J J J P P J J J J J P Q Q C C C C G J J J J J K J J J J J J J J N N P P P P P P P P P P J K K K M M M M X X X K K K M M M M X X X K K K M M M M X X X K K K M M M X X X K K N X X X X Z Q Q Q X X X X P N N P P P P P P P N N P P J N N P P P P P P P Q Q C G G J J J J J Q Q C G G J J J J J K 6.3 10 16 25 C 0101* 6.3 2.01 0.20 (0.079 0.008) 1.25 0.20 (0.049 0.008) 0.50 0.25 (0.020 0.010) 16 25 50 100 6.3 10 16 0201 25 50 100 6.3 10 16 25 50 100 200 250 0402 0603 P P 50 100 200 250 6.3 10 16 25 50 100 200 250 500 0805 1206 A B C E G J K M N P Q X Y Z 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.055) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER EMBOSSED NOTE: Contact factory for non-specified capacitance values *EIA 01005 **Contact Factory for Specifications 20 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 080420 X7R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 1210 1812 1825 2220 Soldering Packaging Reflow Only Paper/Embossed 3.30 0.4 (0.130 0.016) 2.50 0.30 (0.098 0.012) 0.50 0.25 (0.020 0.010) 25 50 100 Reflow Only All Embossed 4.50 0.40 (0.177 0.016) 3.20 0.40 (0.126 0.016) 0.61 0.36 (0.024 0.014) 50 100 Reflow Only All Embossed 4.50 0.40 (0.177 0.016) 6.40 0.40 (0.252 0.016) 0.61 0.36 (0.024 0.014) 50 100 200 Reflow Only All Embossed 5.70 0.50 (0.224 0.020) 5.00 0.40 (0.197 0.016) 0.64 0.39 (0.025 0.015) 50 100 200 mm (in.) mm W) Width (in.) mm (t) Terminal (in.) WVDC Cap 100 101 (pF) 150 151 220 221 330 331 470 471 680 681 1000 102 1500 152 2200 222 3300 332 4700 472 6800 682 Cap 0.01 103 (F) 0.015 153 0.022 223 0.033 333 0.047 473 0.068 683 0.1 104 0.15 154 0.22 224 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 10 106 22 226 47 476 100 107 WVDC (L) Length 10 16 K K K K K K K K K K K K K K K K M M P N X X Z Z Z Z K K K K K K K K K K K K K K K K M M P N X X Z Z Z K K K K K K K K K K K K K K K K M P P Z Z Z Z Z Z 10 16 25 SIZE Letter Max. Thickness K K K K K K K K K K K K K K K K K M M M P X X Z Z Z Z Z K K K K K K K K K K K K K K K K K P P Q Q X Z Z Z Z Z 200 500 K K K K K K K K K K K K P P P P P Z Z Z Z Z M M M M M M M P P P P P Q X X X X Z 16 25 N N N N N N N N N N N N N N N N N Q Q N N N N N N N N N N N N N N N N N N N N Q Q Z Z Z Z Z N N N N N N N N N N N N N N N N N Q Q Z Z Z Z Z Z N N N N N N N N N N N N N N N P P P P Q Q X Z Z Z Z 200 500 N N N N N N N N N N N N N P P P P Q X X Z Z N N N N N N N P P P P P X X X X Z Z Z Z X X X X X X X X X X X X X X X X X X X X X X X Z X X X X X X X X X X X X X X X X X X X X X X X Z 25 X X X X X X X X X X X X X X X X X X X Z Z X X X X X X X X X X X X X X X X X X X X X X Z Z 2225 500 Reflow Only All Embossed 5.70 0.40 (0.224 0.016) 6.30 0.40 (0.248 0.016) 0.64 0.39 (0.025 0.015) 50 100 200 X X X X X X X X X X X X X X X X X X X X X Z Z Z X X X X X X X X X X X X X X X X X X X Z Z X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Z 100 200 500 50 X X X X X X X X X X X X X X X X X X X X X X X Z X X X X X X X X X X X X X X X X X X X Z Z 100 200 Z 50 100 200 500 16 25 50 1210 100 200 500 50 1812 100 200 25 50 1825 2220 A B C E G J K M N P Q X Y Z 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.055) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER 2225 EMBOSSED NOTE: Contact factory for non-specified capacitance values The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 080420 21