l Molded: SOT-23 Surface Mount
l Body marked with device number.
l Mounting Position: Any
l Weight: 0.0077 grams (approx.)
MAXIMUM RATINGS
§ Operating Temperature: -55oC to +150oC
§ Storage Temperature: -55oC to +150oC
§ SL03 thru SL24 have a Peak Pulse Power: 300 Watts
(8/20 usec, Figure 1)
§ Pulse Repetition Rate: <.01%
Description
This product provides unidirectional protection for 1
www.mccsemi.com
line by connecting the input/output line to pin 1, pin 2 to
common or ground and pin 3 (is not connected).
The SL03 thru SL24 product provides board level
protection from static electricity and other induced-voltage
surges that can damage sensitive circuitry.
These TRANSIENT VOLTAGE SUPPRESSOR (TVS)
Diode Arrays protect 3.0/3.3 Volt components such as
DRAM's, SRAM's, COMS, HCOMS, HSIC, and low volt.
interfaces up to 24 volts. Because of the physical size,
weight and protection capabilities, this product is ideal
for use in but not limited to miniaturized electronic
equipment such as hand held instruments, computers,
computer peripherals and cell phones.
omponents
21201 Itasca Street Chatsworth
!"#
$% !"#
Revision: A 2011/10/12
1 of 3
MCC
TM
Micro Commercial Components
Mechanical Data
Features
SOT-23 Package For surface mount application
l
Protects 3.0/3.3 up through 24V Components
l
l
Protects 1 Unidirectional line
l
Provides electrically isolated protection
l
Tape & Reel EIA Standard 481.
l
Epoxy meets UL 94 V-0 flammability rating
Moisture Sensitivity Level 1
l