AUIRF1324S
AUIRF1324L
VDSS 24V
RDS(on) typ. 1.3m
max. 1.65m
ID (Silicon Limited) 340A
ID (Package Limited) 195A
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress
ratings only; and functional operation of the device at these or any other condition be yon d those indicated in the specifications is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The thermal resistance
Features
Advanced Process Techn ology
Ultra Low On-Resistance
Dynamic dV/dT Rating
175°C Operating Temp erature
Fast Switching
Repetitive Avalanche Allowed up to Tjmax
Lead-Free, RoHS Compliant
Automotive Qualified *
Description
Specifically designed for Automotive applications, this HEXFET®
Power MOSFET utilizes the latest processing techniques to achieve
extremely low on-resistance per silicon area. Additional features of
this design are a 175°C junction operating temperature, fast
switching speed and improved repetitive avalanche rating . These
features combine to make this design an extremely efficient and
reliable device for use in Automotive applications and a wide variety
of other applications.
1 2015-11-11
HEXFET® is a registered trademark of Infineon.
*Qualification standards can be found at www.infineon.com
AUTOMOTIVE GRADE
Symbol Parameter Max. Units
ID @ TC = 25°C Continuous Drain Current, VGS @ 10V (Silicon Limited) 340
A
ID @ TC = 100°C Continuous Drain Current, VGS @ 10V (Silicon Limited) 240
ID @ TC = 25°C Continuous Drain Current, VGS @ 10V (Package Limited) 195
IDM Pulsed Drain Current 1420
PD @TC = 25°C Maximum Power Dissipation 300 W
Linear Derating Factor 2.0 W/°C
VGS Gate-to-Source Voltage ± 20 V
EAS Single Pulse Avalanche Energy (Thermally Limited) 270
mJ
IAR Avalanche Current See Fig.14,15, 18a, 18b A
EAR Repetitive Avalanche Energy mJ
dv/dt Peak Diode Recovery 0.46 V/ns
TJ Operating Junction and -55 to + 175
TSTG Storage Temperature Range °C
Soldering Temperature, for 10 seconds (1.6mm from case) 300
Thermal Resistance
Symbol Parameter Typ. Max. Units
RJC Junction-to-Case ––– 0.50
°C/W
RJA Junction-to-Ambient (PCB Mount), D2 Pak ––– 40
D2Pak
AUIRF1324S
TO-262
AUIRF1324L
S
D
G S
D
G
D
Base part number Package Type Standard Pack
Form Quantity
AUIRF1324L TO-262 Tube 50 AUIRF1324L
AUIRF1324S D2-Pak Tube 50 AUIRF1324S
Tape and Reel Left 800 AUIRF1324STRL
Orderable Part Number
G D S
Gate Drain Source
HEXFET® Power MOSFET
AUIRF1324S/L
2 2015-11-11
Notes:
Calculated continuous current based on maxi mum allowable junction temperature. Bond wire current limit is 195A. Note that
current limitations arising from heat ing of the device leads may occur with some lead mounting arrangements.
Repetitive rating; pulse width limited by max. junction temperature.
Limited by TJmax, starting TJ = 25°C, L = 0.014mH, RG = 25, IAS = 195A, VGS =10V. Part not recommended for use ab ove this value.
I
SD 195A, di/dt 450A/µs, VDD V(BR)DSS, TJ 175°C.
Pulse width 400µs; duty cycle 2%.
C
oss eff. (TR) is a fixed capacitance that gives the same charging time as Coss whil e V DS is rising from 0 to 80% VDSS.
C
oss eff. (ER) is a fixed capacitance that gives the same energy as Coss whil e V DS is rising from 0 to 80% VDSS.
When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques refer to
application note #AN-994
R
is measured at TJ approximately 90°C.
Static @ TJ = 25°C (unless otherwise specified)
Parameter Min. Typ. Max. Units Conditions
V(BR)DSS Drain-to-Source Breakdown Voltage 24 ––– ––– V VGS = 0V, ID = 250µA
V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient ––– 22 ––– mV/°C Reference to 25°C, ID = 5mA
RDS(on) Static Drain-to-Source On-Resistance ––– 1.3 1.65 m VGS = 10V, I D = 195A
VGS(th) Gate Threshold Voltage 2.0 ––– 4.0 V VDS = VGS, ID = 250µA
gfs Forward Trans conductance 180 ––– ––– S VDS = 10V, ID = 195A
RG Gate Resistance ––– 2.3 –––
IDSS Drain-to-Source Leakage Current ––– ––– 20 µA VDS = 24V, VGS = 0V
––– ––– 250 VDS = 24V,VGS = 0V,TJ =125°C
IGSS Gate-to-Source Forward Leakage ––– ––– 100 nA VGS = 20V
Gate-to-Source Reverse Leakage ––– ––– -100 VGS = -20V
Dynamic Electrical Characte ristics @ TJ = 25°C (unless otherwise specified)
Qg Total Gate Charge ––– 160 240
nC
ID = 195A
Qgs Gate-to-Source Charge ––– 84 ––– VDS = 12V
Qgd Gate-to-Drain Charge ––– 49 ––– VGS = 10V
Qsync Total Gate Charge Sync. (Qg - Qgd) ––– 76 –––
td(on) Turn-On Delay Time ––– 17 –––
ns
VDD = 16V
tr Rise Time ––– 190 ––– ID = 195A
td(off) Turn-Off Delay Time ––– 83 ––– RG= 2.7
tf Fall Time ––– 120 ––– VGS = 10V
Ciss Input Capacitance ––– 7590 –––
pF
VGS = 0V
Coss Output Capacitance ––– 3440 ––– VDS = 24V
Crss Reverse Transfer Capacitance ––– 1960 ––– ƒ = 1.0MHz, See Fig. 5
Coss eff.(ER) Effective Output Capacitance (Energy Related) ––– 4700 ––– VGS = 0V, VDS = 0V to 19V
Coss eff.(TR) Effective Output Capacitance (Time Related) ––– 4490 ––– VGS = 0V, VDS = 0V to 19V
Diode Characteristics
Parameter Min. Typ. Max. Units Conditions
IS Continuous Source Current ––– ––– 350 A
MOSFET symbol
(Body Diode) showing the
ISM Pulsed Source Current ––– ––– 1420 integral reverse
(Body Diode) p-n junction diode.
VSD Diode Forward Voltage ––– ––– 1.3 V TJ = 25°C,IS = 195A,VGS = 0V
trr Reverse Recovery Time ––– 46 ––– ns TJ = 25°C VDD = 20V
––– 71 ––– TJ = 125°C IF = 195A,
Qrr Reverse Recovery Charge ––– 160 ––– nC TJ = 25°C di/dt = 100A/µs
––– 430 ––– TJ = 125°C
IRRM Reverse Re covery Current ––– 7.7 ––– A TJ = 25°C
ton Forward Turn-On Time Intrinsic turn-on time is negligible (turn -on is dominated by LS+LD)
AUIRF1324S/L
3 2015-11-11
Fig. 2 Typical Output Characteristics
Fig. 3 Typical Transfer Characteri stics Fig. 4 Normalized O n-Resistance vs. Temperature
Fig. 1 Typical Output Characteristics
Fig 5. Typical Capacitance vs. Drain- to-Source Voltage Fig 6. Typical Gate Charge vs. Gate-to-Source Volta ge
0.1 110 100
VDS, Drai n-to-Sourc e V oltage (V )
0.1
1
10
100
1000
10000
ID, Drain-to-Source Current (A)
VGS
TOP 15V
10V
8.0V
6.0V
5.5V
5.0V
4.5V
BOTTOM 4.0V
60µs PULSE WID TH
Tj = 25°C
4.0V
0.1 110 100
VDS, Drain-to-Source Voltage (V)
10
100
1000
10000
ID, Drain-to-Source Current (A)
4.0V
60µs PULSE WIDTH
Tj = 175°C
VGS
TOP 15V
10V
8.0V
6.0V
5.5V
5.0V
4.5V
BOTTOM 4.0V
2 3 4 5 6 7 8 9
VGS, Gate-to-Source Voltage (V)
0.1
1
10
100
1000
ID, Drain-to-Source Current (A)
TJ = 25°C
TJ = 175°C
VDS = 15V
60µs PULSE WIDTH
-60 -40 -20 020 40 60 80 100 120 140 160 180
TJ , Junction Temperature (°C)
0.5
1.0
1.5
2.0
RDS(on) , Drain-to-Source On Resistance
(Normalized)
ID = 195A
VGS = 10V
110 100
VDS, Drain-to-Source Voltage (V)
1000
10000
100000
C, Capacitance (pF)
VGS = 0V, f = 1 MHZ
Ciss = C gs + Cgd, C ds SHORTED
Crss = Cgd
Coss = Cds + Cgd
Coss
Crss
Ciss
0 50 100 150 200
QG, Total Gate Charge (nC)
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
VGS, Gate-to-Source Voltage (V)
VDS= 19V
VDS= 12V
ID= 195A
AUIRF1324S/L
4 2015-11-11
Fig 8. Maximum Safe Operating Area
Fig 10. Drain-to-Source Breakdown Voltage
Fig 11. Typical COSS Stored Energy Fig 12. Maximum Avalanche Energy vs. Drain Current
Fig. 7 Typical Source-to-Drain Diode
Forward Voltage
Fig 9. Maximum Drain Current vs. Case Temperature
0.0 0.5 1.0 1.5
VSD, Source-to-Drain Voltage (V)
1.0
10
100
1000
ISD, Reverse Drain Current (A)
TJ = 25°C
TJ = 175°C
VGS = 0V
-5 0 5 10 15 20 25 30
VDS, Drain-to-Source Voltage (V)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Energy (µJ)
1 10 100
VDS, Drain-to-Source Voltage (V)
1
10
100
1000
10000
ID, Drain-to-Source Current (A)
OPERATION IN THIS AREA
LIMITED BY R DS(on)
Tc = 25°C
Tj = 175°C
Single Pulse
100µsec
1msec
10msec
DC
Limited by
package
25 50 75 100 125 150 175
TC , Case Temperature (°C)
0
50
100
150
200
250
300
350
ID, Drain Current (A)
Limited By Package
-60 -40 -20 020 40 60 80 100 120 140 160 180
TJ , Temperature ( °C )
24
26
28
30
32
V(BR)DSS, Drain-to-Source Breakdown Voltage (V)
Id = 5mA
25 50 75 100 125 150 175
Starting TJ , Junction Temperature (°C)
0
200
400
600
800
1000
1200
EAS , Single Pulse Avalanche Energy (mJ)
ID
TOP 44A
83A
BOTTOM 195A
AUIRF1324S/L
5 2015-11-11
Fig 14. Avalanche Current vs. Pulse width
1E-006 1E-005 0.0001 0.001 0.01 0.1
t1 , Rectangular Pulse Duration (sec)
0.001
0.01
0.1
1
Thermal Response ( Z thJC ) °C/W
0.20
0.10
D = 0.50
0.02
0.01
0.05
SINGLE PULSE
( THERMAL RESPONSE )
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthjc + Tc
Ri (°C/W) I (sec)
0.0125 0.000008
0.2019 0.001110
0.2036 0.007197
0.0822 0.000078
J
J
1
12
23
3
R1
R1R2
R2R3
R3
Ci= iRi
Ci= iRi
C
C
4
4
R4
R4
Fig 13. Maximum Effective Transient Thermal Impedance, Junction-to-Case
1.0E-06 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01
tav (sec)
1
10
100
1000
Avalanche Current (A)
0.05
Duty Cycle = Single Pulse
0.10
Allowed avalanche Current vs avalanche
pulsewidth, tav, assuming j = 25°C and
Tstart = 150°C.
0.01
Allowed avalanche Current vs avalanche
pulsewidth, tav, assuming Tj = 150°C and
Tstart =25°C (Single Pulse)
AUIRF1324S/L
6 2015-11-11
Fig 16. Threshold Voltage vs. Temperature
Notes on Repetiti ve Avalanche Cur ves , Figures 14, 15:
(For further info, see AN-1005 at www.infineon.com)
1. Avalanche failures assumption:
Purely a thermal phenomenon and failure occurs at a temperature far in
excess of Tjmax. This is validated for every part type.
2. Safe operation in Avalanche is allowed as long as Tjmax is not exceeded.
3. Equation below based on circuit and waveforms shown in Figures 18a, 18b.
4. PD (ave) = Average power dissipation per single avalanche pulse.
5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase
during avalanche).
6. Iav = Allowable avalanche current.
7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as
25°C in Figure 13, 14).
t
av = Average time in avalanche.
D = Duty cycle in avalanche = tav ·f
Z
thJC(D, tav) = Transient thermal resistance, see Figures 13)
PD (ave) = 1/2 ( 1.3·BV·Iav) = T/ ZthJC
Iav = 2T/ [1.3·BV·Zth]
EAS (AR) = PD (ave)·tav
25 50 75 100 125 150 175
Starting TJ , Junction Temperature (°C)
0
50
100
150
200
250
300
EAR , Avalanche Energy (mJ)
TOP Single Pulse
BOTTOM 1.0% Duty Cyc le
ID = 195A
Fig 15. Maximum Avalanche Energy vs. Temperature
-75 -50 -25 025 50 75 100 125 150 175 200
TJ , Temperature ( °C )
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
VGS(th), Gate threshold Voltage (V)
ID = 250µA
ID = 1.0mA
ID = 1.0A
AUIRF1324S/L
7 2015-11-11
Fig 17. Peak Diode Recov ery dv/dt Test Circuit for N-Channel HEXFET® Power MOSFETs
Fig 18a. Unclamped Inductive Test Circuit Fig 18b. Unclamped Inductive Waveforms
Fig 19a. Switching Time Test Circuit
Fig 20a. Gate Charge Test Circuit Fig 20b. Gate Charge Waveform
R
G
I
AS
0.01
t
p
D.U.T
L
VDS
+
-V
DD
DRIVER
A
15V
20V
tp
V
(BR)DSS
I
AS
Fig 19b. Switching Time Waveforms
Vds
Vgs
Id
Vgs(th)
Qgs1 Qgs2 Qgd Qgodr
AUIRF1324S/L
8 2015-11-11
Note: For the most current drawing plea se refer to IR website at http://www.irf.com/package/
D2Pak (TO-263AB) Part Marking Info rmation
YWWA
XX XX
Date Code
Y= Year
WW= Work Week
AUIRF1324S
Lot Code
Part Number
IR Logo
D2Pak (TO-263AB) Package Outline (Dimensions are shown in millimeters (inches))
AUIRF1324S/L
9 2015-11-11
TO-262 Part Marking Information
YWWA
XX XX
Date Code
Y= Year
WW= Work Week
AUIRF1324L
Lot Code
Part Number
IR Logo
TO-262 Package Outline (Dimensions are shown in millimeters (inches)
Note: For the most current drawing plea se refer to IR website at http://www.irf.com/package/
AUIRF1324S/L
10 2015-11-11
D2Pak (TO-263AB) Tape & Reel Information (Dimensions are shown in millimeters (inches))
Note: For the most current drawing plea se refer to IR website at http://www.irf.com/package/
3
4
4
TRR
FEED DIRECTION
1.85 (.073)
1.65 (.065)
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
TRL
FEED DIRECTION
10.90 (.429)
10.70 (.421) 16.10 (.634)
15.90 (.626)
1.75 (.069)
1.25 (.049)
11.60 (.457)
11.40 (.449) 15.42 (.609)
15.22 (.601)
4.72 (.136)
4.52 (.178)
24.30 (.957)
23.90 (.941)
0.368 (.0145)
0.342 (.0135)
1.60 (.063)
1.50 (.059)
13.50 (.532)
12.80 (.504)
330.00
(14.173)
MAX.
27.40 (1.079)
23.90 (.941)
60.00 (2.362)
MIN.
30.40 (1.197)
MAX.
26.40 (1.039)
24.40 (.961)
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
AUIRF1324S/L
11 2015-11-11
† Highest passing voltage.
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2015
All Rights Reserved.
IMPORTANT NOTICE
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics
(“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any
information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third
party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this
document and any applicable legal requirements, norms and standards concerning customer’s products and any use of
the product of Infineon Technologies in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
For further information on the product, technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies office (www.infineon.com).
WARNINGS
Due to technical requirements products may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized
representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a
failure of the product or any consequences of the use thereof can reasonably be expected to result in pe rsonal injury.
Qualification Information
Qualification Level
Automotive
(per AEC-Q101)
Comments: This part number(s) passed Automotive qualification. Infineon’s
Industrial and Consumer qualification level is granted by extension of the higher
Automotive level.
D2-Pak MSL1
TO-262
ESD
Machine Model Class M4†
AEC-Q101-002
Human Body Model Class H3A†
AEC-Q101-001
Charged Device Model Class C5†
AEC-Q101-005
RoHS Compliant Yes
Moisture Sensitivity Level
Revision History
Date Comments
11/11/2015 Updated datasheet with corporate template
Corrected ordering table on page 1.
