Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FPF1203 / FPF1203L / FPF1204 / FPF12045 IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Features Description 1.2 V to 5.5 V Input Voltage Operating Range Slew Rate Control with tR: FPF1203/FPF1203l/FPF1204: FPF12045: 2 s The FPF1203 / 03L / 04 / 45 are ultra-small integrated IntelliMAXTM load switches with integrated P-channel switch and analog control features. Integrated slewrate control prevents inrush current and the resulting excessive voltage drop on the power rail. The input voltage range operates from 1.2 V to 5.5 V to provide power-disconnect capability for post-regulated power rails in portable and consumer products. The low shutoff current allows power designs to meet standby and off-power drain specifications. Typical RON: 45 m at VIN=5.5 V 55 m at VIN=3.3 V 90 m at VIN=1.8 V 185 m at VIN=1.2 V 100 s The FPF120x are controlled by a logic input (ON pin) compatible with standard CMOS GPIO circuitry found on Field Programmable Gate Array (FPGA) embedded processors. The FPF120x are available in 0.76 mm x 0.76 mm 4-bump WLCSP. Output Discharge Function on FPF1204 / 45 Low <1.5 A Quiescent Current ESD Protected: Above 7 kV HBM, 2 kV CDM GPIO / CMOS-Compatible Enable Circuitry Applications 4-Bump, WLCSP 0.76 mm x 0.76 mm, 0.4 mm Pitch Mobile Devices and Smart Phones Portable Media Devices Tablet PCs Advanced Notebook, UMPC, MID Portable Medical Devices GPS and Navigation Equipment Ordering Information Part Number Top Mark Switch (Typical) at 3.3VIN Output Discharge ON Pin Activity tR Package FPF1203UCX QL 55 m NA Active HIGH 100 s FPF1203LUCX QP 55 m NA Active LOW 100 s FPF1204UCX QM 55 m 65 Active HIGH FPF1204UCX_F013 (Amkor Assembly Only) QM 55 m 65 Active HIGH FPF1204BUCX (Backside Laminate) QM 55 m 65 Active HIGH 100 s 4-Bump, Wafer-Level ChipScale Package (WLCSP), 100 s 0.76 mm x 0.76 mm, 0.4 mm Pitch 100 s FPF12045UCX NC 55 m 65 Active HIGH (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 2 s www.fairchildsemi.com FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch August 2016 VIN VIN VOUT VOUT FPF1203/03L/04/45 + - CIN ON COUT GND Figure 1. Typical Application Functional Block Diagram FPF1203/03L/04/45 VIN VOUT CONTROL LOGIC ON Turn-On Slew Rate Controlled Driver R ESD Protection Output Discharge (Optional) GND Figure 2. Functional Block Diagram (Output Discharge for FPF1204 / 45) (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 www.fairchildsemi.com 2 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Application Diagram Figure 3. WLCSP Bumps Facing Down (Top View) Figure 4. WLCSP Bumps Facing Up (Bottom View) VOUT A1 A2 VIN VIN A2 A1 VOUT GND B1 B2 ON ON B2 B1 GND Figure 5. Pin Assignments (Top View) Figure 6. Pin Assignments (Bottom View) Pin Definitions Pin # Name Description A1 VOUT A2 VIN B1 GND B2 ON ON/OFF Control, active HIGH; FPF1203/04/45 B2 ON ON/OFF Control, active LOW; FPF1203L Switch output Supply input: input to the power switch Ground (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 www.fairchildsemi.com 3 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Pin Configurations Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit -0.3 6.0 V VIN VIN, VOUT, VON to GND ISW Maximum Continuous Switch Current at Ambient Operating Temperature 2.2 A PD Power Dissipation at TA=25C 1.0 W TSTG Storage Temperature Range +150 C JA ESD -65 Thermal Resistance, Junction-to-Ambient Electrostatic Discharge Capability (1,2) 1S2P with One Thermal Via 1S2P without Thermal Via (1) 110 (2) 95 Human Body Model, JESD22-A114 7 Charged Device Model, JESD22-C101 2 C/W kV Notes: 1. Measured using 2S2P JEDEC std. PCB. 2. Measured using 2S2P JEDEC PCB COLD PLATE Method. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit VIN Input Voltage 1.2 5.5 V TA Ambient Operating Temperature -40 +85 C (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 www.fairchildsemi.com 4 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Absolute Maximum Ratings Unless otherwise noted, VIN=1.2 V to 5.5 V and TA=-40 to +85C. Typical values are at VIN=3.3 V and TA=25C. Symbol Parameter Condition Min. Typ. Max. Unit 5.5 V Basic Operation VIN Supply Voltage 1.2 IQ(OFF) Off Supply Current FPF1203/04/45 VON=GND, VOUT=Open, VIN=5.5 V 0.1 1.0 FPF1203L 1.0 2.0 ISD Shutdown Current FPF1203/04/45 VON=GND, VOUT=GND 0.1 1.0 FPF1203L 1.2 3.0 IQ Quiescent Current FPF1203/04/45 IOUT=0 mA, VON=VIN, =5.5 V 0.1 1.5 VIN=5.5 V, IOUT=200 mA, TA=25C 45 55 (3) VIN=3.3 V, IOUT=200 mA, TA=25C 55 65 (3) VIN=1.8 V, IOUT=200 mA, TA=25C 90 100 (3) VIN=1.2 V, IOUT=200 mA, TA=25C 185 220 (3) RON FPF1203L On Resistance VON=VIN, VOUT=Open, VIN=5.5 V VON=VIN, VOUT=GND IOUT=0 mA, VON=GND, VIN, = 5.5 V (3) VIN=1.8 V, IOUT=200 mA, TA=85C RPD Output Discharge RPULL DOWN VIN=3.3 V, VON=OFF, IFORCE=20 mA, TA=25C, FPF1204 / FPF12045 VIH On Input Logic HIGH Voltage VIN=1.2 V to 5.5 V VIL On Input Logic LOW Voltage VIN=1.2 V to 5.5 V Pull-Down Resistance at ON Pin VIN=1.2 V to 5.5 V On Input Leakage VON=VIN or GND RON_PD ION A A A m 105 65 75 1.15 V 0.65 V M 8.3 1 A Dynamic Characteristics (4) tDON Turn-On Delay tR VOUT Rise Time tON Turn-On Time (6) (4) tDON Turn-On Delay tR VOUT Rise Time tON tDOFF Turn-On Time (4) Turn-Off Delay (4,5) VOUT Fall Time Turn-Off Time tDOFF Turn-Off Delay (5,7) (4,5) tF VOUT Fall Time Turn-Off Time tDOFF Turn-Off Delay (5,7) VOUT Fall Time (5,7) tOFF Turn-Off Time tDOFF Turn-Off Delay VIN=3.3 V, RL=10 , CL=0.1 F, TA=25C, FPF1203L VOUT Fall Time Turn-Off Time (5,7) s 0.5 2.0 s 2.5 VIN=3.3 V, RL=500 , CL=0.1 F, TA=25C, FPF1203L 6 115 s 121 VIN=3.3 V, RL=10 , CL=0.1 F, TA=25C, FPF1203 4.0 2.9 s 7.3 (4,5) (4,5) 2 4 (4,5) (4,5) 170 2 (4,5) tOFF tOFF VIN=3.3 V, RL=10 , CL=0.1 F, TA=25C, FPF12045 (4,5) tF tF 100 (6) tOFF tF 70 (4) VIN=3.3 V, RL=500 , CL=0.1 F, TA=25C, FPF1203 6 115 s 121 Continued on the following page... (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 www.fairchildsemi.com 5 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Electrical Characteristics Unless otherwise noted, VIN=1.2 V to 5.5 V and TA=-40 to +85C. Typical values are at VIN=3.3 V and TA=25C. Symbol Parameter tDOFF (4,5) tF tOFF Turn-Off Delay (4,5) VOUT Fall Time Turn-Off Time (5,7) Min. VIN=3.3 V, RL=10 , CL=0.1 F, (5) TA=25C, FPF1204/45 Turn-Off Delay tF VOUT Fall Time (4,5) Turn-Off Time (5,7) Typ. Max. Unit 4.0 2.5 s 6.5 (4,5) tDOFF tOFF Condition 6 VIN=3.3 V, RL=500, CL=0.1 F, (5) TA=25C, FPF1204/45 11 s 17 Notes: 3. This parameter is guaranteed by design and characterization; not production tested. 4. tDON/tDOFF/tR/tF are defined in Figure 23. 5. Output discharge enabled during off-state. 6. tON=tR + tDON. 7. tOFF=tF + tDOFF. (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 www.fairchildsemi.com 6 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Electrical Characteristics Figure 7. Shutdown Current vs. Temperature Figure 8. Shutdown Current vs. Supply Voltage Figure 9. Off Supply Current vs. Temperature (VOUT Floating) Figure 10. Off Supply Current vs. Supply Voltage (VOUT Floating) Figure 11. Quiescent Current vs. Temperature Figure 12. Quiescent Current vs. Supply Voltage Figure 13. RON vs. Temperature Figure 14. RON vs. Supply Voltage (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 www.fairchildsemi.com 7 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Typical Performance Characteristics ID, DRAIN CURRENT (A) 100 100s 10 1ms 1 10ms RDS(ON) Limit 0.1 100ms 1s 10s DC Single Pulse RqJA = 110oC/W TA = 25oC 0.01 0.1 Figure 15. ON Pin Threshold vs. VIN 1 VDS, DRAIN-SOURCE VOLTAGE (V) 10 Figure 16. Drain Current vs. Drain-Source Voltage Safe Operating Area Figure 17. Turn-On Response - FPF1203 / 04 (VIN=3.3 V, CIN=1 F, COUT=0.1 F, RL=10 ) Figure 18. Turn-Off Response - FPF1203 (VIN=3.3 V, CIN=1 F, COUT=0.1 F, RL=10 ) (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 Figure 19. Turn-Off Response - FPF1203 (VIN=3.3 V, CIN=1 F, COUT=0.1 F, RL=500 ) www.fairchildsemi.com 8 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Typical Performance Characteristics (Continued) Figure 20. Turn-Off Response (VIN=3.3 V, CIN=1 F, COUT=0.1 F, RL=10 , FPF1204 / 45) (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 Figure 21. Turn-Off Response (VIN=3.3 V, CIN=1 F, COUT=0.1 F, RL=500 , FPF1204 / 45) www.fairchildsemi.com 9 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Typical Performance Characteristics (Continued) The FPF1203 / 03L / 04 / 045 are low-RON P-channel load switches with controlled turn-on. The core of each device is a 55 m P-channel MOSFET and controller capable of functioning over a wide input operating range of 1.2 to 5.5 V. The FPF1204 / 45 contain a 65 on-chip load resistor for quick output discharge when the switch is turned off. The FPF12045 features a faster VOUT Rise Time of 5 s. VIN VIN VOUT Output Capacitor A 0.1 F capacitor, COUT, should be placed between the VOUT and GND pins. This capacitor prevents parasitic board inductance from forcing VOUT below GND when the switch is on. CIN greater than COUT is highly recommended. COUT greater than CIN can cause VOUT to exceed VIN when the system supply is removed. This could result in current flow through the body diode from VOUT to VIN. VOUT FPF1204 + - CIN OFF ON ON COUT GND Figure 22. Typical Application Input Capacitor To limit the voltage drop on the input supply caused by transient inrush current when the switch turns on into a discharged load capacitor or short-circuit, a capacitor must be placed between the VIN and GND pins. A 1 F ceramic capacitor, CIN, placed close to the pins is usually sufficient. Higher-value CIN can be used to reduce the voltage drop in higher-current applications. Figure 23. Timing Diagram for FPF1203/4/045 Board Layout For best performance, traces should be as short as possible. To be most effective, input and output capacitors should be placed close to the device to minimize the effect of parasitic trace inductance on normal and short-circuit operation. Using wide traces or large copper planes for all pins (VIN, VOUT, ON, and GND) minimizes the parasitic electrical effects and the case-ambient thermal impedance. However, the VOUT pin should not connect directly to the battery source due to the discharge mechanism of the load switch. The table below pertains to the Packaging information on the following page. Product Dimensions D E X Y 760 m 30 m 760 m 30 m 0.180 mm 0.018 m 0.180 mm 0.018 m (c) 2011 Fairchild Semiconductor Corporation FPF1203 / FPF1203L / FPF1204 / FPF12045 * Rev. 1.14 www.fairchildsemi.com 10 FPF1203 / FPF1203L / FPF1204 / FPF12045 -- IntelliMAXTM Ultra-Small, Slew-Rate-Controlled Load Switch Operation and Application Description F 0.03 C A E 2X B 0.40 A1 0.40 D BALL A1 INDEX AREA O0.20 Cu Pad O0.30 Solder Mask 0.03 C 2X TOP VIEW RECOMMENDED LAND PATTERN (NSMD PAD TYPE) 0.06 C 0.2920.018 0.539 0.461 0.05 C C E 0.2080.021 SEATING PLANE SIDE VIEWS D NOTES: A. NO JEDEC REGISTRATION APPLIES. 0.005 O0.2600.020 4X 0.40 B A 0.40 (Y)0.018 F 1 2 (X)0.018 BOTTOM VIEW C A B B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCE PER ASME Y14.5M, 1994. D. DATUM C IS DEFINED BY THE SPHERICAL CROWNS OF THE BALLS. E. PACKAGE NOMINAL HEIGHT IS 500 MICRONS 39 MICRONS (461-539 MICRONS). F. FOR DIMENSIONS D, E, X, AND Y SEE PRODUCT DATASHEET. G. DRAWING FILNAME: MKT-UC004AFrev2. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com