General Purpose Low Power PCB Relays SCHRACK Power PCB Relay RT1 sensitive n n n n n 1 pole 10A, 1 form C (CO) or 1 form A (NO) contact Highly sensitive version, coil power 250mW 5kV/10mm coil-contact Reinforced insulation Ambient temperature 85C Typical applications Domestic appliances, heating control. Zb Coil Data Approvals VDE Cert. No. 40007571, UL E214025, cCSAus 1142018 Coil voltage range Operative range, IEC 61810 Coil insulation system according UL Technical data of approved types on request. Contact Data Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Max. switching voltage 400 VAC Rated current 10A Limiting making current; max. 4s, duty factor 10% 15A Breaking capacity 2500VA Contact material AgNi 90/10 Frequency of operation; with/without load 3000/72000h-1 Operate/release time max. 10/8ms Bounce time max.; form A/form B 4/9ms Contact ratings Type Contact IEC 61810 RT174 A/B (NO/NC) UL 508 RT174 C (CO) RT174 A/B (NO/NC) RT174 A/B (NO/NC) RT174 A (NO) RT174 B (NC) RT174 A (NO) EN60730-1 RT174 A (NO) Load Cycles 10A, 250VAC resistive, 85C 10A, 250VAC, general purpose, 85C 10A, 250VAC, general purpose, 40C B300, 40C R150, 40C 1/2hp, 240VAC, 40C 3/4hp, 240VAC, 40C 6(4)A, 250VAC, 85C Mechanical endurance Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 005 5 3.7 006 6 4.5 009 9 6.8 012 12 9.0 024 24 18.0 048 48 36.0 060 60 45.0 5 to 60VDC 2 class F Release voltage VDC 0.5 0.6 0.9 1.2 2.4 4.8 6.0 Coil resistance 10%1) 100 144 312 576 2304 9216 128571) Rated coil power mW 250 250 260 250 250 250 280 1) Coil resistance 12%. All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. 100x103 6x103 30x103 6x103 6x103 1x103 1x103 100x103 >30x106 operations Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 10-2014, Rev. 1014 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions 1000Vrms 5000Vrms 10/10mm IIIa PTI 250V Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 1 General Purpose Low Power PCB Relays SCHRACK Power PCB Relay RT1 sensitive (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g Terminal type PCB-THT, plug-in Weight14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270C/10s RTIII 260C/5s Packaging/unit tube/20 pcs., box/500 pcs. PCB layout / terminal assignment Bottom view on solder pins 10A, pinning 3.5mm *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54mm can be used. Accessories For details see datasheet Accessories Industrial Power Relay RT NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. 1 form C (CO) contact Dimensions 1 form A (NO) contact Product code structure RT Typical product code 1 7 4 012 Type RT Power PCB Relay RT1 sensitive Version 1 10A, pinning 3.5mm, flux proof Contact configuration 7 1 form C (CO) contact Contact material 4 AgNi90/10 Coil Coil code: please refer to coil versions table Product code Version B 10A, pinning 3.5mm, wash tight 8 1 form A (NO) contact Contacts Contact material RT174005 Flux proof 1 form C (CO) AgNi 90/10 RT174009 contact RT174012 RT174024 RT184005 1 form A (NO) RTB84009 Wash tight contact This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. 2 10-2014, Rev. 1014 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Coil 5VDC 9VDC 12VDC 24VDC 5VDC 9VDC Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Part number 3-1393239-6 9-1419143-5 3-1393239-8 3-1393239-9 4-1393239-5 4-1393238-7 Catalog product data, `Definitions' section, application notes and all specifications are subject to change.