EMT2 / UMT2N / IMT2A Transistors General purpose (dual transistors) EMT2 / UMT2N / IMT2A zExternal dimensions (Unit : mm) zFeatures 1) Two 2SA1037AK chips in a EMT or UMT or SMT package. (3) (2) IMT2A (1) (4) (1) 1.2 1.6 (5) 0.5 EMT2 / UMT2N (3) (2) (6) 0.13 zEquivalent circuits (4) (5) 0.5 0.5 1.0 1.6 0.22 EMT2 (6) Each lead has same dimensions ROHM : EMT6 Tr1 Tr2 Tr1 Tr2 UMT2N V -6 V -150 mA Collector power dissipation 150(TOTAL) PC mW 300(TOTAL) IMT2A Junction temperature Storage temperature Tj 150 C Tstg -55 to +150 C 0.1Min. Each lead has same dimensions ROHM : UMT6 EIAJ : SC-88 1 2 IMT2A (4) (3) (5) 0.3 1 120mW per element must not be exceeded. 2 200mW per element must not be exceeded. 1.6 zPackage, marking, and packaging specifications IMT2A Package EMT6 UMT6 SMT6 Marking Code T2 T2R T2 TR T2 T108 8000 3000 3000 Basic ordering unit (pieces) 2.8 0.3Min. 0.8 UMT2N 0~0.1 EMT2 0.15 Type 1.1 IC EMT2 / UMT2N 0.9 -50 VEBO 0.7 VCEO Emitter-base voltage (1) Collector-emitter voltage 2.1 (2) V 0~0.1 Unit -60 (6) Limits VCBO 0.15 Symbol Collector current 1.3 1.25 Collector-base voltage 2.0 (3) (2) (1) (6) (5) 0.2 zAbsolute maximum ratings (Ta=25C) Parameter 0.65 (1) 0.65 (3) (2) 0.95 0.95 1.9 2.9 (6) (4) (4) (5) Each lead has same dimensions ROHM : SMT6 EIAJ : SC-74 zElectrical characteristics (Ta=25C) Symbol Min. Typ. Max. Unit Collector-base breakdown voltage Parameter BVCBO -60 - - V IC=-50A Conditions Collector-emitter breakdown voltage BVCEO -50 - - V IC=-1mA Emitter-base breakdown voltage Collector cutoff current BVEBO ICBO -6 - - - - -0.1 V A IE=-50A VCB=-60V VEB=-6V IEBO - - -0.1 A VCE(sat) - - -0.5 V IC/IB=-50mA/-5mA hFE 120 - 560 - VCE=-6V, IC=-1mA Transition frequency fT - 140 - MHz Output capacitance Cob - 4 5 pF Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio VCE=-12V, IE=2mA, f=100MHz VCE=-12V, IE=0A, f=1MHz Transition frequency of the device. Rev.A 1/2 EMT2 / UMT2N / IMT2A Transistors zElectrical characteristics curves -5 -2 -1 -0.5 -0.2 -0.1 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -24.5 -21.0 -6 -17.5 -14.0 -4 -10.5 -7.0 -2 -3.5A -0.4 -0.8 -1.2 -1.6 DC CURRENT GAIN : hFE 25C 100 -40C 200 100 50 50 -250 -200 -150 -100 -20 -50A IB=0 0 -1 -2 -3 -4 -5 COLLECTOR TO EMITTER VOLTAGE : VCE (V) -1 Ta=25C -0.5 -0.2 IC/IB=50 -0.1 20 10 -0.05 -2 -5 -10 -20 -0.2 -0.5 -1 -50 -100 1000 TRANSITION FREQUENCY : fT (MHz) -0.2 -0.1 Ta=100C 25C -40C -0.05 -0.2 -0.5 -1 -2 -5 -10 -20 -50 -100 COLLECTOR CURRENT : IC (mA) Fig.7 Collector-emitter saturation voltage vs. collector current (II) 500 200 100 50 0.5 1 2 5 10 20 50 -5 -10 -20 -50 -100 Fig.6 Collector-emitter saturation voltage vs. collector current (I) Ta=25C VCE= -12V lC/lB=10 -2 COLLECTOR CURRENT : IC (mA) Fig.5 DC current gain vs. collector current (II) Fig.4 DC current gain vs. collector current (I) -0.5 -0.2 -0.5 -1 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) -1 VCE= -6V -5 -10 -20 -50 -100 -2 100 EMITTER CURRENT : IE (mA) Fig.8 Gain bandwidth product vs. emitter current COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) -0.2 -0.5 -1 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) -500 -450 -400 -350 -300 Fig.3 Grounded emitter output characteristics (II) Ta=100C 200 Ta=25C -40 Fig.2 Grounded emitter output characteristics (I) VCE= -5V -3V -1V Ta=25C -60 IB=0 -2.0 500 500 -80 COLLECTOR TO MITTER VOLTAGE : VCE (V) Fig.1 Grounded emitter propagation characteristics DC CURRENT GAIN : hFE -28.0 -8 0 BASE TO EMITTER VOLTAGE : VBE (V) -100 -31.5 COLLECTOR CURRENT : IC (mA) -10 -35.0 Ta=25C COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) -20 -10 VCE= -6V Ta=100C 25C -40C COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : Ic (mA) -50 20 Ta=25C f=1MHz IE=0A IC=0A Cib 10 Co b 5 2 -0.5 -1 -2 -5 -10 -20 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) Fig.9 Collector output capacitance vs. collector-base voltage Emitter inputcapacitance vs. emitter-base voltage Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1