ABB3007
High Speed Translator Buffer to CMOS (Selectable Drive)
30332 Esperanza., Rancho Santa Margarita, Ca 92688 Ph: 949-546-8000 Fax: 949-546-8001 www.Abracon.com 03/21/05 Page 2
PIN DESCRIPTION
Name 8pin SOIC
Pin number 3x3mm QFN
Pin number Type Description
GND 1,3,6 1,2,4,5,
9,14,15 P Ground.
VDD 4,7 7,10,11,12 P Power supply.
DRIV_SEL 8 13 I
Drive Select input: ‘1’ for sta ndard drive, ‘0’ for hi-drive output.
Internal pull-up (de fault is ‘1’).
REF_IN 2 3 I
Reference input signal. The frequency of this signal will be
reproduced at the output (after translation t o CMOS level).
CLK_OUT 5 8 O CMOS clock output.
OE N/A 16 I Output enable (‘1 ’ for enable). Internal pull-up (defa ult is ‘1’).
ELECTRICAL SPECIFICATIONS
1. Absolute Maximum Ratings
PARAMETERS SYMBOL MIN. MAX. UNITS
Supply Voltage VDD 4.6 V
Input Voltage, dc VI -0.5 VDD+0.5 V
Output Voltage, dc VO -0.5 VDD+0.5 V
Storage Temperature TS -65 150
°C
Ambient Operating T emperature* TA -40 85 °C
Junction Temperature TJ 125
°C
Lead Temperature ( soldering, 10s) 260 °C
ESD Protection, Human Body Model 2 kV
Exposure of the d evice under conditions beyond the limits specified by Maximum Ratings for extended periods may cause pe rmanent damage to the
device and affect product reliability. These conditions represent a stress rating on ly, and functional operations of the devic e at these or any other con-
ditions above the operational limits noted in this spec ification is not implied.
* Note: Operating Temperature is guaranteed by design for all parts (COMMERC IAL and INDUSTRIAL), but tested fo r COMMERCIAL grade only.
2. AC Specifications
PARAMETERS CONDITIONS MIN. TYP. MAX. UNITS
Input Frequency 0 200 MHz
Input signal swing REF_IN input 100 mV
Output Frequency 0 200 MHz