74HC14D-Q100,118 - NXP - Datasheet.Directory

1. General description

The 74HC14-Q100; 74HCT14-Q100 is a high-speed Si-gate CMOS device and is pin

compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with

JEDEC standard No. 7A.

The 74HC14-Q100; 74HCT14-Q100 provides six inverting buffers with Schmitt-trigger

action. They are capable of transforming slowly changing input signals into sharply

defined, jitter-free output signals.

This product has been qualified to the Automotive Electronics Council (AEC) standard

Q100 (Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

Specified from 40 C to +85 C and from 40 C to +125 C

Low-power dissipation

ESD protection:

MIL-STD-883, method 3015 exceeds 2000 V

HBM JESD22-A114F exceeds 2000 V

MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )

Multiple package options

3. Applications

Wave and pulse shapers

Astable multivibrators

Monostable multivibrators

74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

Rev. 4 — 19 April 2013 Product data sheet

Product data sheet Rev. 4 — 19 April 2013 2 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

4. Ordering information

5. Functional diagram

Table 1. Ordering information

Type number Package

Temperature

range Name Description Version

74HC14N-Q100 40 C to +125 C DIP14 plastic dual in-line package; 14 leads (300 mil) SOT27-1

74HC14D-Q100 40 C to +125 C SO14 plastic small outline package; 14 lead s; body width

3.9 mm SOT108-1

74HCT14D-Q100

74HC14PW-Q100 40 C to +125 C TSSOP14 plastic thin shrink small outline package; 14 leads;

body width 4.4 mm SOT402-1

74HCT14PW-Q100

74HC14BQ-Q100 40 C to +125 C DHVQFN14 plastic dual in-line compatible thermal enhanced very

thin quad flat package; no leads; 14 terminals;

body 2.5 30.85 mm

SOT762-1

74HCT14BQ-Q100

Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram

(one Schmitt-trigger)

mna204

1A 1Y

2A 2Y

3A 3Y

4A 4Y

5A 5Y

11 10

6A 6Y

13 12

001aac497

mna025

Product data sheet Rev. 4 — 19 April 2013 3 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

6. Pinning information

6.1 Pinning

6.2 Pin description

7. Functional description

[1] H = HIGH voltage level;

L = LOW voltage level.

(1) This is not a supply pin. The substrate is attached to this

pad using conductive die attach material. There is no

electrical or mechanical requirement to solder this pad.

However, if it is soldered, the solder land should remain

floating or be connected to GND.

Fig 4. Pin configu ration DIP14, SO14 and TSSOP14 Fig 5. Pin configuration DHVQFN14



$



<



$



<



$

*1' <



























DDD

+&4

+&74

DDD

*1'

7UDQVSDUHQWWRSYLHZ

<

$

$

<

<

$

$

<

<

$

*1'

<

$

9&&

 

















WHUPLQDO

LQGH[DUHD

+&4

+&74

Table 2. Pin description

Symbol Pin Description

1A to 6A 1, 3, 5, 9, 11, 13 data input 1

1Y to 6Y 2, 4, 6, 8, 10, 12 data output 1

GND 7 ground (0 V)

VCC 14 supply voltage

Table 3. Function table[1]

Input Output

nA nY

Product data sheet Rev. 4 — 19 April 2013 4 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

8. Limiting values

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2] For DIP14 package: Ptot derates linearly with 12 mW/K above 70 C.

For SO14 package: Ptot derates linearly with 8 mW/K above 70 C.

For TSSOP14 packages: Ptot derates linearly with 5.5 mW/K above 60 C.

For DHVQFN14 packages: Ptot derates linearly with 4.5 mW/K above 60 C.

9. Recommended operating conditions

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions Min Max Unit

VCC supply voltage 0.5 +7 V

IIK input clamping current VI < 0.5 V or VI>V

CC +0.5 V [1] -20 mA

IOK output clamping current VO<0.5 V or VO>V

CC +0.5V [1] -20 mA

IOoutput curren t 0.5 V < VO < VCC +0.5V - 25 mA

ICC supply current - 50 mA

IGND ground current 50 - mA

Tstg storage temperature 65 +150 C

Ptot total power dissipation [2]

DIP14 package - 750 mW

SO14, TSSOP14 and

DHVQFN14 packages - 500 mW

Table 5. Recommended operating con ditions

Voltages are referenced to GND (ground = 0 V)

Symbol Parameter Conditions 74HC14-Q100 74HCT14-Q100 Unit

Min Typ Max Min Typ Max

VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V

VIinput voltage 0 - V CC 0- V

CC V

VOoutput voltage 0 - VCC 0- V

CC V

Tamb ambient temperature 40 +25 +125 40 +25 +125 C

Product data sheet Rev. 4 — 19 April 2013 5 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

10. Static characteristics

Table 6. Static characteristics

At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions Tamb = 25 C Tamb = 40 C

to +85 CTamb = 40 C

to +125 CUnit

Min Typ Max Min Max Min Max

74HC14-Q100

VOH HIGH-level

output voltage VI= VT+ or VT

IO = 20 A; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V

IO = 20 A; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V

IO = 20 A; VCC = 6.0 V 5.9 6.0 - 5.9 - 5.9 - V

IO = 4.0 mA; VCC = 4.5 V 3.98 4.32 - 3.84 - 3.7 - V

IO = 5.2 mA; VCC = 6.0 V 5.48 5.81 - 5.34 - 5.2 - V

VOL LOW-level

output voltage VI= VT+ or VT

IO = 20 A; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V

IO = 20 A; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V

IO = 20 A; VCC = 6.0 V - 0 0.1 - 0.1 - 0.1 V

IO = 4.0 mA; VCC = 4.5 V - 0.15 0.26 - 0.33 - 0.4 V

IO = 5.2 mA; VCC = 6.0 V - 0.16 0.26 - 0.33 - 0.4 V

IIinput leakage

current VI = VCC or GND; VCC =6.0V - - ±0.1 - ±1.0 - ±1.0 A

ICC supply current VI = VCC or GND; IO=0A;

VCC =6.0V --2.0- 20 - 40A

CIinput

capacitance -3.5- - - - - pF

74HCT14-Q100

VOH HIGH-level

output voltage VI= VT+ or VT; VCC = 4.5 V

IO = 20 A 4.4 4.5 - 4.4 - 4.4 - V

IO = 4.0 mA 3.98 4.32 - 3.84 - 3.7 - V

VOL LOW-level

output voltage VI= VT+ or VT; VCC = 4.5 V

IO = 20 A; - 0 0.1 - 0.1 - 0.1 V

IO = 4.0 mA; - 0.15 0.26 - 0.33 - 0.4 V

IIinput leakage

current VI = VCC or GND; VCC =5.5V - - ±0.1 - ±1.0 - ±1.0 A

ICC supply current VI=V

CC or GND; IO = 0 A;

VCC =5.5V --2.0- 20 - 40A

ICC additional

supply current per input pin;

VI=V

CC 2.1 V; other pins

at VCC or GND; IO=0A;

VCC = 4.5 V to 5.5 V

- 30 108 - 135 - 147 A

CIinput

capacitance -3.5- - - - - pF

Product data sheet Rev. 4 — 19 April 2013 6 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

11. Dynamic characteristics

[1] tpd is the same as tPHL and tPLH.

[2] tt is the same as tTHL and tTLH.

[3] CPD is used to determine the dynamic power dissipation (PD in W):

PD=C

PD VCC2fiN+ (CLVCC2fo) where:

fi= input frequency in MHz;

fo= output frequency in MHz;

CL= output load capacitance in pF;

VCC = supply voltage in V;

N = number of inputs switching;

(CLVCC2fo) = sum of outputs.

Table 7. Dy namic characteristics

GND = 0 V; CL= 50 pF; for load circuit see Figure 7.

Symbol Parameter Conditions Tamb = 25 C Tamb = 40 C to

+125 CUnit

Min Typ Max Max

(85 C) Max

(125 C)

74HC14-Q100

tpd propagation delay nA to nY; see Figure 6 [1]

VCC = 2.0 V - 41 125 155 190 ns

VCC = 4.5 V - 15 25 31 38 ns

VCC = 5.0 V; CL=15pF - 12 - - - ns

VCC = 6.0 V - 12 21 26 32 ns

tttransition time see Figure 6 [2]

VCC = 2.0 V - 19 75 95 110 ns

VCC = 4.5 V - 7 15 19 22 ns

VCC = 6.0 V - 6 13 15 19 ns

CPD power dissipation

capacitance per package; VI=GNDtoV

CC [3] -7- - -pF

74HCT14-Q100

tpd propagation delay nA to nY; see Figure 6 [1]

VCC = 4.5 V - 20 34 43 51 ns

VCC = 5.0 V; CL=15pF - 17 - - - ns

tttransition time V CC = 4.5 V; see Figure 6 [2] - 7 15 19 22 ns

CPD power dissipation

capacitance per package;

VI=GNDtoV

CC 1.5 V [3] -8- - -pF

Product data sheet Rev. 4 — 19 April 2013 7 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

12. Waveforms

Measurement points are given in Table 8.

VOL and VOH are typical voltage output levels that occur with the output load.

Fig 6. Input to output propagation delays

mna722

PLH

PHL

90 %

10 %

nY output

nA input

GND

TLH

THL

Table 8. Measurement points

Type Input Output

VMVMVXVY

74HC14-Q100 0.5VCC 0.5VCC 0.1VCC 0.9VCC

74HCT14-Q100 1.3 V 1.3 V 0.1VCC 0.9VCC

Test data is given in Table 9.

Definitions test circuit:

RT = termination resistance should be equal to output impedance Zo of the pulse generator.

CL = load capacitance including jig and probe capacitance.

Fig 7. Test circuit for measuring switching times

001aah768

negative

pulse

GND

positive

pulse

GND

10 %

90 %

10 % VMVM

VCC

DUT

VIVO

Product data sheet Rev. 4 — 19 April 2013 8 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

13. Transfer characteristics

14. Transfer characteristics waveforms

Table 9. Test data

Type Input Load Test

VItr, tfCL

74HC14-Q100 VCC 6.0 ns 15 pF, 50 pF tPLH, tPHL

74HCT14-Q100 3.0 V 6.0 ns 15 pF, 50 pF tPLH, tPHL

Table 10. Transfer characteristics

At recommended operating conditions; voltages are referenced to GND (ground = 0 V); see Figure 8 and Figure 9.

Symbol Parameter Conditions Tamb = 25 C Tamb = 40 C

to +85 CTamb = 40 C

to +125 CUnit

Min Typ Max Min Max Min Max

74HC14-Q100

VT+ positive-going

threshold

voltage

VCC = 2.0 V 0.7 1.18 1.5 0.7 1.5 0.7 1.5 V

VCC = 4.5 V 1.7 2.38 3.15 1.7 3.15 1.7 3.15 V

VCC = 6.0 V 2.1 3.14 4.2 2.1 4.2 2.1 4.2 V

VTnegative-going

threshold

voltage

VCC = 2.0 V 0.3 0.52 0.9 0.3 0.9 0.3 0.9 V

VCC = 4.5 V 0.9 1.4 2.0 0.9 2.0 0.9 2.0 V

VCC = 6.0 V 1.2 1.89 2.6 1.2 2.6 1.2 2.6 V

VHhysteresis

voltage VCC = 2.0 V 0.2 0.66 1.0 0.2 1.0 0.2 1.0 V

VCC = 4.5 V 0.4 0.98 1.4 0.4 1.4 0.4 1.4 V

VCC = 6.0 V 0.6 1.25 1.6 0.6 1.6 0.6 1.6 V

74HCT14-Q100

VT+ positive-going

threshold

voltage

VCC = 4.5 V 1.2 1.41 1.9 1.2 1.9 1.2 1.9 V

VCC = 5.5 V 1.4 1.59 2.1 1.4 2.1 1.4 2.1 V

VTnegative-going

threshold

voltage

VCC = 4.5 V 0.5 0.85 1.2 0.5 1.2 0.5 1.2 V

VCC = 5.5 V 0.6 0.99 1.4 0.6 1.4 0.6 1.4 V

VHhysteresis

voltage VCC = 4.5 V 0.4 0.56 - 0.4 - 0.4 - V

VCC = 5.5 V 0.4 0.6 - 0.4 - 0.4 - V

Fig 8. Transfer characteristics Fig 9. Transfer characteristics definitions

mna207

VHVT+

VT−

mna208

T+

T−

Product data sheet Rev. 4 — 19 April 2013 9 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

a. VCC =2.0V b. V

CC =4.5V

c. VCC =6.0V

Fig 10. Typical 74HC transfer characteristics

0 2.0

0.4 0.8 1.2 1.6

mna846

ICC

(μA)

VI (V)

1.0

0.2

0.4

0.6

0.8

1234

mna847

ICC

(mA)

VI (V)

0 6.0

ICC

(mA)

VI (V)

1.0

0.2

0.4

0.6

0.8

1.2 2.4 3.6 4.8

mna848

Product data sheet Rev. 4 — 19 April 2013 10 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

15. Application information

The slow input rise and fall times cause additional power dissipation, this can be

calculated using the following formula:

Padd =f

i(trICC(AV) +t

fICC(AV))VCC where:

Padd = additional power dissipation (W);

fi= input frequency (MHz);

tr=rise time (ns); 10%to90%;

tf= fall time (ns); 90 % to 10 %;

ICC(AV) = average additional supply current (A).

Average ICC(AV) differs with positive or negative input transitions, as shown in Figure 12

and Figure 13.

An example of a relaxation circuit using the 74HC14-Q100; 74HCT14-Q100 is shown

in Figure 14.

a. VCC =4.5V b. V

CC =5.5V

Fig 11. Typical 74HCT transfer character istics

1.5

0.3

0.6

0.9

1.2

1234

mna849

ICC

(mA)

VI (V)

0123 6

1.8

0.6

0.3

1.2

1.5

0.9

mna850

ICC

(mA)

VI (V)

Product data sheet Rev. 4 — 19 April 2013 11 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

(1) Positive-going edge.

(2) Negative-going edge.

Fig 12. Average additional supply current as a function of VCC for 74HC14-Q100; linear change of VI between

0.1VCC to 0.9VCC.

0246

400

300

100

200

mna852

ICC(AV)

(μA)

VCC (V)

positive - going

edge

negative - going

edge

(1) Positive-going edge.

(2) Negative-going edge.

Fig 13. Average additional supply current as a function of VCC for 74HCT14-Q100; linear chang e of VI between

0.1VCC to 0.9VCC.

0246

400

300

100

200

mna853

VCC (V)

ICC(AV)

(μA)

negative - going

edge

positive - going

edge

Product data sheet Rev. 4 — 19 April 2013 12 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

For 74HC14-Q100 and 74HCT14-Q100:

For K-factor see Figure 15

Fig 14. Relaxation osc ill ator

mna035

---1

KRC

------------------

=

K-factor for 74HC14-Q100 K-factor for 74HCT14-Q100

Fig 15. Typical K-factor for relaxation oscillator

9



DDD











9

  

DDD















Product data sheet Rev. 4 — 19 April 2013 13 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

16. Package outline

Fig 16. Package outline SOT27-1 (DIP14)

UNIT A

max. 1 2 (1) (1)

b1cD (1)

Ee M

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

inches

DIMENSIONS (inch dimensions are derived from the original mm dimensions)

SOT27-1 99-12-27

03-02-13

min. A

max. bmax.

1.73

1.13 0.53

0.38 0.36

0.23 19.50

18.55 6.48

6.20 3.60

3.05 0.2542.54 7.62 8.25

7.80 10.0

8.3 2.24.2 0.51 3.2

0.068

0.044 0.021

0.015 0.77

0.73

0.014

0.009 0.26

0.24 0.14

0.12 0.010.1 0.3 0.32

0.31 0.39

0.33 0.0870.17 0.02 0.13

050G04 MO-001 SC-501-14

(e )

seating plane

pin 1 index

0 5 10 mm

scale

Note

1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included.

DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1

Product data sheet Rev. 4 — 19 April 2013 14 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

Fig 17. Package outline SOT108-1 (SO14)

UNIT A

max. A1A2A3bpcD

(1) E(1) (1)

ELL

pQZywv θ

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

inches

1.75 0.25

0.10 1.45

1.25 0.25 0.49

0.36 0.25

0.19 8.75

8.55 4.0

3.8 1.27 6.2

5.8 0.7

0.6 0.7

0.3 8

0.25 0.1

DIMENSIONS (inch dimensions are derived from the original mm dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.

1.0

0.4

SOT108-1

detail X

vMA

(A )

076E06 MS-012

pin 1 index

0.069 0.010

0.004 0.057

0.049 0.01 0.019

0.014 0.0100

0.0075 0.35

0.34 0.16

0.15 0.05

1.05

0.041

0.244

0.228 0.028

0.024 0.028

0.012

0.01

0.25

0.01 0.004

0.039

0.016

99-12-27

03-02-19

0 2.5 5 mm

scale

SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1

Product data sheet Rev. 4 — 19 April 2013 15 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

Fig 18. Package outline SOT402-1 (TSSOP14)

UNIT A1A2A3bpcD

(1) E(2) (1)

ELL

pQZywv θ

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.15

0.05 0.95

0.80 0.30

0.19 0.2

0.1 5.1

4.9 4.5

4.3 0.65 6.6

6.2 0.4

0.3 0.72

0.38 8

0.13 0.10.21

DIMENSIONS (mm are the original dimensions)

Notes

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.

0.75

0.50

SOT402-1 MO-153 99-12-27

03-02-18

0.25

14 8

detail X

(A )

vMA

0 2.5 5 mm

scale

TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1

max.

1.1

pin 1 index

Product data sheet Rev. 4 — 19 April 2013 16 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

Fig 19. Package outline SOT762-1 (DHVQFN14)

terminal 1

index area

0.51

A1Eh

UNIT ye

0.2

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 3.1

2.9

1.65

1.35

2.6

2.4 1.15

0.85

0.30

0.18

0.05

0.00 0.05 0.1

DIMENSIONS (mm are the original dimensions)

SOT762-1 MO-241 - - -- - -

0.5

0.3

0.1

0.05

0 2.5 5 mm

scale

SOT762-1

DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;

14 terminals; body 2.5 x 3 x 0.85 mm

A(1)

max.

AA1c

detail X

y1C

13 9

02-10-17

03-01-27

terminal 1

index area

E(1)

Note

1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.

D(1)

Product data sheet Rev. 4 — 19 April 2013 17 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

17. Abbreviations

18. Revision history

Table 11. Abbreviations

Acronym Description

CMOS Complementary Metal-Oxide Semiconductor

DUT Device Under Test

ESD ElectroStatic Discharge

HBM Human Body Model

LSTTL Low-power Schottky Transistor-Transistor Logic

MM Machine Model

MIL Military

Table 12. Revision history

Document ID Release date Data sheet status Change notice Supersedes

74HC_HCT14_Q100 v.4 20130419 Product data sheet - 74HC_HCT14_Q100 v.3

Modifications: •74HCT14N-Q100 removed.

74HC_HCT14_Q100 v.3 20130410 Product data sheet - 74HC_HCT14_Q100 v.2

Modifications: •74HC14N-Q100 and 74HCT14N-Q100 added.

74HC_HCT14_Q100 v.2 20120810 Product data sheet - 74HC_HCT14_Q100 v.1

Modifications: •Figure 15 added (typical K-factor for relaxation oscillator).

74HC_HCT14_Q100 v.1 20120709 Product data sheet - -

Product data sheet Rev. 4 — 19 April 2013 18 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

19. Legal information

19.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Definitions”.

[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nxp.com.

19.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liab ility for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and tit le. A short data sh eet is intended

for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local NXP Semiconductors sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall pre vail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

NXP Semiconductors and its customer, unless NXP Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the NXP Semiconductors product is

deemed to off er functions and qualities beyond tho se described in the

Product data sheet.

19.3 Disclaimers

Limited warr a nty and liability — Information in this document is believed to

be accurate and reliable. However, NXP Semiconductors does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information. NXP Se miconductors takes no

responsibility for the content in this document if provided by an inf ormation

source outside of NXP Semiconductors.

In no event shall NXP Semiconductors be liable for any indirect , incidental,

punitive, special or consequ ential damages (including - wit hout limitatio n - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, NXP Semiconductors’ ag gregate and cumulati ve liability toward s

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of NXP Semiconductors.

Right to make changes — NXP Semiconductors reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all informa tion supplied prior

to the publication hereof .

Suitability for use in automotive applications — This NXP

Semiconductors product has been qualified for use in automotive

applications. Unless ot herwise agreed in writing, the product is not designed,

authorized or warranted to be suitable for use in life support, lif e-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of an NXP Semiconductors product can reasonably be expected

to result in perso nal injury, death or severe propert y or environmental

damage. NXP Semiconductors and its suppliers accept no liability for

inclusion and/or use of NXP Semiconducto rs products in such equipment or

applications an d ther efo re su ch inclusi on a nd/or use is at the cu stome r's own

risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. NXP Semiconductors makes no

representation or warranty tha t such application s will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and ope ration of their applications

and products using NXP Semiconductors product s, and NXP Semiconductors

accepts no liability for any assistance with applicati ons or customer product

design. It is customer’s sole responsibility to determine whether the NXP

Semiconductors product is suit able and fit for the custome r’s applications and

products planned, as well as fo r the planned application and use of

customer’s third party customer(s). Customers should provide appropriate

design and operating safeguards to minimize the risks associated with their

applications and products.

NXP Semiconductors does not accept any liability related to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the application or use by customer’s

third party customer(s). Customer is responsible for doing all necessary

testing for th e customer’s applications and products using NXP

Semiconductors products in order to avoid a default of the applications and

the products or of the application or use by customer’s third party

customer(s). NXP does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanent ly and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — NXP Semiconductors

products are sold subject to the general terms and conditions of commercial

sale, as published at http://www.nxp.com/profile/terms, unless otherwise

agreed in a valid written individua l agreement. In case an individual

agreement is concluded only the ter ms and conditions of the respective

agreement shall apply. NXP Semiconductors hereby expressly object s to

applying the customer’s general terms and conditions with regard to the

purchase of NXP Semiconductors products by customer.

Document status[1][2] Product status[3] Definition

Objective [short] data sheet D evelopment This document contains data from the objective specification for product develop ment.

Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.

Product [short] dat a sheet Production This document contains the product specification.

Product data sheet Rev. 4 — 19 April 2013 19 of 20

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

No offer to sell or license — Nothing in this document may be interpret ed or

construed as an of fer to sell product s that is op en for accept ance or the grant ,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

19.4 Trademarks

Notice: All referenced b rands, produc t names, service names and trademarks

are the property of their respect i ve ow ners.

20. Contact information

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

NXP Semiconductors 74HC14-Q100; 74HCT14-Q100

Hex inverting Schmitt trigger

For more information, please visit: http://www.nxp.co m

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 19 April 2013

Document identifier: 74HC_ HCT14_Q100

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section ‘Legal information’.

21. Contents

1 General description. . . . . . . . . . . . . . . . . . . . . . 1

2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1

3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

4 Ordering information. . . . . . . . . . . . . . . . . . . . . 2

5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2

6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 3

6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3

7 Functional description . . . . . . . . . . . . . . . . . . . 3

8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4

9 Recommended operating conditions. . . . . . . . 4

10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5

11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6

12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

13 Transfer characteristics . . . . . . . . . . . . . . . . . . 8

14 Transfer characteristics waveforms. . . . . . . . . 8

15 Application information. . . . . . . . . . . . . . . . . . 10

16 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 13

17 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 17

18 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 17

19 Legal in formation. . . . . . . . . . . . . . . . . . . . . . . 18

19.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 18

19.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

19.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 18

19.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 19

20 Contact information. . . . . . . . . . . . . . . . . . . . . 19

21 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20