Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC723LC3C v03.0514 HIGH SPEED LOGIC - SMT 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Typical Applications Features The HMC723LC3C is ideal for: Supports High Data Rates: up to 13 Gbps * RF ATE Applications Differential & Singe-Ended Operation * Broadband Test & Measurement Fast Rise and Fall Times: 19 / 17 ps * Serial Data Transmission up to 13 Gbps Low Power Consumption: 260 mW typ. * Digital Logic Systems up to 13 GHz Programmable Differential Output Voltage Swing: 700 - 1300 mV Propagation Delay: 105 ps Single Supply: -3.3V 16 Lead Ceramic 3x3mm SMT Package: 9mm 2 Functional Diagram General Description The HMC723LC3C is a D-type Flip Flop designed to support data transmission rates of up to 13 Gbps, and clock frequencies as high as 13 GHz. During normal operation, data is transferred to the outputs on the positive edge of the clock. Reversing the clock inputs allows for negative-edge triggered applications. The HMC723LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input signals to the HMC723LC3C are terminated with 50 Ohms to ground on-chip, and maybe either AC or DC coupled. The differential outputs of the HMC723LC3C may be either AC or DC coupled. Outputs can be connected directly to a 50 Ohm to ground terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non-ground DC voltage. The HMC723LC3C operates from a single -3.3V DC supply and is available in a ceramic RoHS compliant 3x3 mm SMT package. Electrical Specifications, TA = +25C, Vee = -3.3V Parameter Conditions Power Supply Voltage Min. Typ. Max -3.6 -3.3 -3.0 V Power Supply Current 80 mA Maximum Data Rate 13 Gbps Maximum Clock Rate 13 GHz Input High Voltage -0.5 0.5 Input Low Voltage -1.0 0.0 Input Return Loss Output Amplitude Output High Voltage 1 Units Frequency <13 GHz V V 10 dB Single-Ended, peak-to-peak 550 mVp-p Differential, peak-to-peak 1100 mVp-p -10 mV For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC723LC3C v03.0514 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Electrical Specifications, (continued) Conditions Min. Typ. Max Units -570 Output Rise / Fall Time mV Differential, 20% - 80% 19 / 17 ps Frequency <13 GHz 10 dB Output Return Loss Random Jitter Jr rms Deterministic Jitter, Jd 215 -1 peak-to-peak, 0.2 PRBS input [1] 2 Propagation Delay Clock to Data, td Clock Phase Margin ps rms 13 GHz Set Up & Hold Time, tSH ps, p-p 105 ps 320 deg 6 ps [1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215 -1 PRBS input, and a single-ended output DC Current vs. Supply Voltage Output Differential vs. Supply Voltage [1] [3] [1] [2] 1600 DC CURRENT (mA) 90 DIFFERENTIAL VOLTAGE (mV) 95 +25C +85C -40C 85 80 75 70 65 60 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 1500 +25C +85C -40C 1400 1300 1200 1100 1000 -3.7 -2.9 -3.6 -3.5 -3.4 -3.1 -3 -2.9 1400 DIFFERENTIAL VOLTAGE (mV) 1500 DIFFERENTIAL VOLTAGE (mV) -3.2 Output Differential vs. Frequency [1] Output Differential vs. VR [3] 1300 1100 +25C +85C -40C 900 700 1300 1200 1100 1000 900 800 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 VR (V) [1] VR = 0.0V -3.3 SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) 500 -1.2 HIGH SPEED LOGIC - SMT Parameter Output Low Voltage [2] Frequency = 13 GHz 2 4 6 8 10 12 14 16 FREQUENCY (GHz) [3] Frequency = 10 GHz For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC723LC3C v03.0514 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Rise / Fall Time vs. Supply Voltage [2] Rise / Fall Time vs. VR [2] 25 23 tr tf RISE/FALL TIME (ps) RISE/FALL TIME (ps) 23 21 19 17 15 -3.7 -3.6 -3.5 -3.4 -3.3 -3.2 -3.1 -3 21 19 17 15 -1.2 -2.9 Input Return Loss vs. Frequency -1 -0.8 -0.6 -0.4 VR (V) -0.2 0 0.2 0.4 Output Return Loss vs. Frequency -15 -10 -20 RETURN LOSS (dB) -15 -25 -30 -35 -20 -25 -30 -40 -45 -35 0 2 4 6 8 10 12 14 FREQUENCY (GHz) [1] VR = 0.0V 3 tr tf SUPPLY VOLTAGE (V) RETURN LOSS (dB) HIGH SPEED LOGIC - SMT 25 [2] Frequency = 13 GHz 0 2 4 6 8 10 12 14 FREQUENCY (GHz) [3] Frequency = 10 GHz For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC723LC3C v03.0514 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE [1] Test Conditions: Pattern generated with an Agilent N4903A Serial BERT. Eye Diagram presented on a Tektronix CSA 8000. Device input = 13 Gbps PN code, Vin = 300mVp-p differential. Both output channels shown. Timing Diagram tc = HIGH SPEED LOGIC - SMT Eye Diagram I fclock tSH = Setup and Hold Time CPM = Clock Phase Margin = 360 tc - tSH tc Truth Table Input Notes: D = DP - DN C = CP - CN Q = QP - QN Outputs D C L L -> H Q L H L -> H H H - Positive voltage level L - Negative voltage level For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC723LC3C v03.0514 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE HIGH SPEED LOGIC - SMT Absolute Maximum Ratings Power Supply Voltage (Vee) -3.75V to +0.5V Input Signals -2V to +0.5V Output Signals -1.5V to +1V Storage Temperature -65C to +150C Operating Temperature -40C to +85C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. GROUND PADDLE MUST BE SOLDERED TO Vee. Package Information Part Number Package Body Material Lead Finish HMC723LC3C Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H723 XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX 5 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC723LC3C v03.0514 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE Pin Descriptions Function Description 1, 4, 5, 8, 9, 12 GND Signal Grounds 2, 3 DN, DP Data Inputs 6, 7 CP, CN Clock Inputs 10, 11 QN, QP Data Outputs 13, 16 GND Supply Ground 14 VR Output level control. Output level may be adjusted by either applying a voltage to VR per "Output Differential vs. VR" plot, or by tying VR to GND with a resistor per the following equation: V0(R) = 1.2 / (2.1 + R), R in k 15, Package Base Vee Negative Supply Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HIGH SPEED LOGIC - SMT Pin Number 6 HMC723LC3C v03.0514 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE HIGH SPEED LOGIC - SMT Evaluation PCB Item Description J1 DN J2 DP J3 CP J4 CN J5 QN J6 QP J7 Vee J8 VR J9 GND List of Materials for Evaluation PCB 118777 [1] Item Description J1 - J6 PCB Mount SMA RF Connectors J7 - J9 DC Pin C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 4.7 F Capacitor, Tantalum R1 10 Ohm Resistor, 0603 Pkg. U1 HMC723LC3C High Speed Logic, D-Type Flip-Flop PCB [2] 118775 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 7 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed package base should be connected to Vee. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC723LC3C v03.0514 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE HIGH SPEED LOGIC - SMT Application Circuit For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC723LC3CTR HMC723LC3CTR-R5