Assembly Pin
Pin protrusion of
approx. .38 (.015)
seeks hole in PCB
64 www.calmark.com •800-854-7086
SERIES 101 TO 108 - PLASTIC EXTRACTORS
Calmark offers the Series 101, 103, 104,
105 Card Extractors for efficient
extraction of Printed Circuit Board from
connectors and the Series 107 and 108
Card Inserter-Extractor for efficient
insertion and extraction of Printed Circuit
Board in high density connector contact
and multiple connector applications.
FEATURES
n Lever action for safe easy card
extraction
n Ample gripping and pushing
surfaces for extracting and
inserting card
n Available in colors for coding
n Generous area for hot stamp marking
n Exact replacement for other
manufacturers
MATERIALS
Series 101, 103, 104, 105 molded
in 6/6 Nylon. All Series 107 plastic
extractors are molded in Glass Filled
(30%) 6/6 or Type 6 Nylon. See table
for flammability ratings. UL94-V0
parts are self extinguishing to flame.
May be used at 121°C (250°F)
continuously. Resistant to alkalies,
weak acids, and common solvents.
ROLL PINS
• 2.38 (.094) dia x 6.35 (.250) long
Series 101, 103, 104, 105, 107,
107-10, 107-20, 107-20-3, 107-70,
107-70-3
• 2.38 (.094) dia x 7.95 (.313) long
Series 107-3, 107-10-3, 107-70-4
• 3.18 (.125) dia x 6.35 (.250) long
Series 108
• 1.98 (.076) dia x 7.95 (.313)
Series 107-30
• 2.38 (.094) dia x 12.7 (.500) long
Series 107-40
COLOR
Other colors available see Part
number code. Series 101, 103, 104,
105 standard color is natural/white.
Series 107 and 108 standard color
is black. For standard colors, a color
suffix is not necessary.
HOT STAMPING
Hot stamp marking service is available.
Please contact an Application Engineer
with your requirements.
SERIES P - PRE-STARTED
ASSEMBLY PIN
Calmark offers any of our extractors and
inserter-extractors with the option of
Pre-Started Assembly Pin.
FEATURES
n Faster and easier installation of
extractor to PC card
n Eliminates need for special tools or
equipment and set-up time
n Eliminates loss of loose assembly pins
Series 101 to 108 - Plastic Extractors
Series
Part Number Feature Board Thickness Standard
Color UL 94 Mechanical
Advantage Figures
101 E 1.6 (.063) natural V-2 3:1 1/A
V0101 E 1.6 (.063) natural V-0 3:1 1/A
103 E D 1.6 (.063) natural V-2 3:1 2/A
V0103 E 1.6 (.063) natural V-0 3:1 2/A
103-3 E D 2.4 (.093) natural V-2 3:1 2/A
V0103-3 E 2.4 (.093) natural V-0 3:1 2/A
104 E D 1.6 (.063) natural V-2 3:1 3/A
V0104 E 1.6 (.063) natural V-0 3:1 3/A
104-3 E D 2.4 (.093) natural V-2 3:1 3/A
V0104-3 E 2.4 (.093) natural V-0 3:1 3/A
105 E D 1.6 (.063) natural V-2 3:1 4/A or B
V0105 E 1.6 (.063) natural V-0 3:1 4/A or B
105-3 E D 2.4 (.093) natural V-2 3:1 4/A or B
V0105-3 E 2.4 (.093) natural V-0 3:1 4/A or B
107 I E D 1.6 (.063) black V-0 4.5:1 5/C
107-3 I E D 2.4 (.093)/3.2 (.125) black V-0 4.5:1 5/C
107-10 I E D 1.6 (.063) black V-0 3.3:1 6/C
107-10-3 I E D 2.4 (.093) black V-0 3.3:1 6/C
107-20 I E L 1.6 (.063) black V-2 4.5:1 7/D
V0107-20 I E L 1.6 (.063) black V-0 4.5:1 7/D
107-20-3 I E L 2.4 (.093) black V-0 4.5:1 7/D
V0107-20-3 I E L 2.4 (.093) black V-0 4.5:1 7/D
107-30 I E 1.6 (.063) black V-0 5.5:1 8/E
107-40 I E D 1.6 (.063) black V-0 4.5:1 9/C
107-40-3 I E 2.4 (.093)/2.4 (.125) black V-0 4.5:1 9/C
107-70 I E L 1.6 (.063) black V-0* 4.5:1 10/D
107-70-3 I E L 2.4 (.093) black V-0* 4.5:1 10/D
107-70-4 I E L 3.2 (.125) black V-0* 4.5:1 10/D
108 I E 1.6 (.063) black V-0 4.5:1 11/F
Feature: I = Inserter E = Extractor L = Latching D = meets DSCC 83023
For Pre-start pin feature, add “P” prefix to part number
*Main handle portion is UL-94V0, but latch is UL94-V2
For colors other than the standard color, use one of the following suffixes: BLK, BRN, RED, ORG, YEL, GRN, BLU, PRP, GRY or WHT.