Assembly Pin
Pin protrusion of
approx. .38 (.015)
seeks hole in PCB
64 www.calmark.com •800-854-7086
SERIES 101 TO 108 - PLASTIC EXTRACTORS
Calmark offers the Series 101, 103, 104,
105 Card Extractors for efficient
extraction of Printed Circuit Board from
connectors and the Series 107 and 108
Card Inserter-Extractor for efficient
insertion and extraction of Printed Circuit
Board in high density connector contact
and multiple connector applications.
FEATURES
n Lever action for safe easy card
extraction
n Ample gripping and pushing
surfaces for extracting and
inserting card
n Available in colors for coding
n Generous area for hot stamp marking
n Exact replacement for other
manufacturers
MATERIALS
Series 101, 103, 104, 105 molded
in 6/6 Nylon. All Series 107 plastic
extractors are molded in Glass Filled
(30%) 6/6 or Type 6 Nylon. See table
for flammability ratings. UL94-V0
parts are self extinguishing to flame.
May be used at 121°C (250°F)
continuously. Resistant to alkalies,
weak acids, and common solvents.
ROLL PINS
• 2.38 (.094) dia x 6.35 (.250) long
Series 101, 103, 104, 105, 107,
107-10, 107-20, 107-20-3, 107-70,
107-70-3
• 2.38 (.094) dia x 7.95 (.313) long
Series 107-3, 107-10-3, 107-70-4
• 3.18 (.125) dia x 6.35 (.250) long
Series 108
• 1.98 (.076) dia x 7.95 (.313)
Series 107-30
• 2.38 (.094) dia x 12.7 (.500) long
Series 107-40
COLOR
Other colors available see Part
number code. Series 101, 103, 104,
105 standard color is natural/white.
Series 107 and 108 standard color
is black. For standard colors, a color
suffix is not necessary.
HOT STAMPING
Hot stamp marking service is available.
Please contact an Application Engineer
with your requirements.
SERIES P - PRE-STARTED
ASSEMBLY PIN
Calmark offers any of our extractors and
inserter-extractors with the option of
Pre-Started Assembly Pin.
FEATURES
n Faster and easier installation of
extractor to PC card
n Eliminates need for special tools or
equipment and set-up time
n Eliminates loss of loose assembly pins
Series 101 to 108 - Plastic Extractors
Series
Part Number Feature Board Thickness Standard
Color UL 94 Mechanical
Advantage Figures
101 E 1.6 (.063) natural V-2 3:1 1/A
V0101 E 1.6 (.063) natural V-0 3:1 1/A
103 E D 1.6 (.063) natural V-2 3:1 2/A
V0103 E 1.6 (.063) natural V-0 3:1 2/A
103-3 E D 2.4 (.093) natural V-2 3:1 2/A
V0103-3 E 2.4 (.093) natural V-0 3:1 2/A
104 E D 1.6 (.063) natural V-2 3:1 3/A
V0104 E 1.6 (.063) natural V-0 3:1 3/A
104-3 E D 2.4 (.093) natural V-2 3:1 3/A
V0104-3 E 2.4 (.093) natural V-0 3:1 3/A
105 E D 1.6 (.063) natural V-2 3:1 4/A or B
V0105 E 1.6 (.063) natural V-0 3:1 4/A or B
105-3 E D 2.4 (.093) natural V-2 3:1 4/A or B
V0105-3 E 2.4 (.093) natural V-0 3:1 4/A or B
107 I E D 1.6 (.063) black V-0 4.5:1 5/C
107-3 I E D 2.4 (.093)/3.2 (.125) black V-0 4.5:1 5/C
107-10 I E D 1.6 (.063) black V-0 3.3:1 6/C
107-10-3 I E D 2.4 (.093) black V-0 3.3:1 6/C
107-20 I E L 1.6 (.063) black V-2 4.5:1 7/D
V0107-20 I E L 1.6 (.063) black V-0 4.5:1 7/D
107-20-3 I E L 2.4 (.093) black V-0 4.5:1 7/D
V0107-20-3 I E L 2.4 (.093) black V-0 4.5:1 7/D
107-30 I E 1.6 (.063) black V-0 5.5:1 8/E
107-40 I E D 1.6 (.063) black V-0 4.5:1 9/C
107-40-3 I E 2.4 (.093)/2.4 (.125) black V-0 4.5:1 9/C
107-70 I E L 1.6 (.063) black V-0* 4.5:1 10/D
107-70-3 I E L 2.4 (.093) black V-0* 4.5:1 10/D
107-70-4 I E L 3.2 (.125) black V-0* 4.5:1 10/D
108 I E 1.6 (.063) black V-0 4.5:1 11/F
Feature: I = Inserter E = Extractor L = Latching D = meets DSCC 83023
For Pre-start pin feature, add “P” prefix to part number
*Main handle portion is UL-94V0, but latch is UL94-V2
For colors other than the standard color, use one of the following suffixes: BLK, BRN, RED, ORG, YEL, GRN, BLU, PRP, GRY or WHT.
65
www.calmark.com •800-854-7086
SERIES 101 TO 108 - PLASTIC EXTRACTORS
12.70 (.500)
17.47
(.688)
26.97
(1.062)
6.35
(.250)
6.35
(.250)
9.52
(.375)
3.56
(.140)
R
17.47
(.688)
9.52
(.375)
6.35
(.250)
12.70 (.500)
3.56
(.140)
R
28.58 +.25/-.1.02
(1.125 +.01/-.04)
9.91
(.390)
27.76
(1.093)
6.35
(.250)
9.52
(.375)
3.17
(.125)
* This dimension reduces to
11.10 (.437) when extractor
is fully rotated against board
11.94
(.470)
31.88
(1.255)
5½°
13.2*
(.519)
7.47
(.294)
24.00
(.945)
9.52
(.375)
6.35
(.250)
3.17
(.125)
R7.37
(.290)
7.37*
(.290)
12.7
(.500)
11.05
(.435)
3.96
(.156)
R
50.8
(2.00)
12.06
(.475)
*8.89 (.350)
for 2.4 (.094)
and 3.2 (.125)
thick boards
11.05
(.435)
38.1
(1.50)
12.06
(.475)
7.37*
(.290)
*8.89 (.350)
for 2.4 (.094)
and 3.2 (.125)
thick boards
3.96
(.156)
R
3.96
(.156)
R
50.8
(2.00)
5.6
(.22)
12.06
(.475)
7.37
(.290)
31.88
(1.255)
32.0
(1.26)
12.7 (.500)
7.37
(.290)
3.96
(.156)
R
12.7(.500)
11.05
(.435)
12.06
(.475)
47.5
(1.87)
7.37*
(.290)
11.05
(.435 )
22.35 (.880)
3.96
(.156)
R
12.06
(.475)
*8.89
(.350) for
3.2 (.125) thick boards
50.5
(1.99)
6.35
(.250)
3.96
(.156)
R
12.7(.500)
11.05
(.435)
11.81
(.465)
6.35
(.250)
6.35
(.250)
2.77
(.109)
6.4 x 6.4
(.250 x .250)
Chamfer
6.35
(.250)
6.35
(.250)
2.77
(.109)
18.5 (.73)
9.1
(.36)
6.35
(.250)
6.35
(.250)
2.77
(.109)
Provides insertion and extraction travel of 8.9 (.35) min.
Nominal position of card edge when
seated in connector. The Inserter-
Extractor will allow 1.3 (.05) overtravel
for tolerance take-up.
Detail of Actuating Surfaces
Required on Top and Bottom Guide Plates
7.24 ± .38
(.285 ± .015)
1.5 (.06) Ref.
Card Guide
Surface
1.5 (.06) max.
6.1 (.24) max.
6.35
(.250)
6.35
(.250) 2.77
(.109)
Dia.
2.38
(.094)
Dia.
18.5 (.73)
9.1
(.36)
Provides insertion and extraction travel of 8.9 (.35) min.
Nominal position of card edge when
seated in connector. The Inserter-
Extractor will allow 1.3 (.05) overtravel
for tolerance take-up.
Detail of Actuating Surfaces
Required on Top and Bottom Guide Plates
7.24 ± .38
(.285 ± .015)
1.5 (.06)
Card Guide
Surface
1.5 (.06) max.
6.1 (.24) max.
22.86 ± .13
(.900 ± .005)
2.28 ± .13
(.090 ± 005)
7.87
(.310)
4.57 (.180)
9.4
(.37)
2.36
(.093)
Dia.
17.8
(.70)
Provides insertion and extraction travel of 8.9 (.35) min.
Nominal position of card edge when
seated in connector. The Inserter-
Extractor will allow .8 (.03) overtravel
for tolerance take-up.
Detail of Actuating Surfaces
Required on Top and Bottom Guide Plates
4.83 ± .25 (.190 ± .010)
Card Guide
Surface
.8 (.03) max.
4.3 (.17) max.
1.02 (.040) Ref
1.5 (.06) Ref
6.35
(.250)
9.57
(.375)
3.18
(.125)
18.15 (.715)
6.4 x 6.4
(.250 x .250)
Chamfer
Provides insertion and extraction travel of 8.9 (.35) min.
Nominal position of card edge when
seated in connector.
1.5 (.06) Ref
4.6 (.18) Min
1.91 (.075)
5.13 (.202)
Card Guide
Surface
13.49
(.531)
Card Entry Notch
2.31 wide x 2.54 deep
(.091 x .100)
APPLICATION DATA
Two inserter or inserter-
extractors are recommended
per printed circuit board taller
than 127 (5) in height.
FIG. 1
FIG. 5
FIG. 9 FIG. 10 FIG. 11
FIG. 6 FIG. 7
FIG. 8
FIG. 2 FIG. 3
FIG. 4
FIG. A FIG. B
FIG. C
FIG. D
FIG. E
FIG. F
Units: mm (in)
Unless specified otherwise,
.xx = ± .25, .x = ±.5
(.xxx = ± .010, .xx = ± .02)
Units: mm (in)
Unless specified otherwise,
.xx = ± .25, .x = ±.5
(.xxx = ± .010, .xx = ± .02)