FX20-120S-0.5SH - HIROSE(HRS) - Datasheet.Directory

Floating range

:0.6mm

Floating range

:0.6〜0.8mm

Y direction

X direction

Header-side contact

Receptacle-side

contact

Enlarged view of the contact area

0.5 mm Pitch, Board to Board Connector with Floating Structure

FX20 Series

2014.3 ②

■Features

1. 0.5 mm pitch

2. Connection type: Right angle / Vertical

3. Pin counts : 20, 40, 60, 80, 100, 120 and 140

4. Floating range: ± 0.6 to 0.8 mm in the X direction

and ± 0.6 mm in the Y direction

A double beam contact structure produces a highly

reliable contact (Refer to the figure on the right)

6. Current capacity: 0.5 A per pin

7. Effective mating length of 1.5 mm

This connector utilizes a 1.5 mm effective mating length for signal

contacts and provides a sufficient margin for its mating stroke.

8. No conductive trace surface is not specified

Contains the vacuum pick up area needed to allow

automatic mounting

10.Self-aligning and self-guiding structure

Built-in guide posts enable self-alignment and ensure a secure connection

■Stacking height chart

FX20-**S-0.5SV

h=15mm h=20mm h=25mm h=30mm Right angle

connection Right angle

connection

FX20-**P-0.5SV15

FX20-**P-0.5SV20

FX20-**S-0.5SV10

FX20-**S-0.5SH

Receptacle Header FX20-**P-0.5SV15 FX20-**P-0.5SV20

FX20-**S-0.5SV h=15mm h=20mm

FX20-**S-0.5SV10 h=25mm h=30mm

FX20-**S-0.5SH Right angle connection Right angle connection

Floating range X direction ±0.6mm ±0.8mm

Y direction ±0.6mm ±0.6mm

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

■Product Speciﬁ cations

Ratings Rated current 0.5A

Rated voltage AC 50V

Operating temperature range: -55 - 85°C (Note 1)

Storage temperature range: -10 - 60°C (Note 2)

Item Standards Condition

1. Contact resistance 70 mø max. 100 mA(DC or 1000Hz)

2. Insulation resistance 100 Mø min. 100 V DC.

3. Voltage proof No ﬂ ashover or breakdown. 150V AC for 1 min.

4. Mechanical operation

Contact resistance : Variation from initial

value 20 mø or less.

No damage, crack and looseness of parts.

50 times insertions and extractions.

5. Vibration No electrical discontinuity of 1 µs.

No damage, crack and looseness of parts.

Frequency: 10 to 55 to 10Hz, approx 5 min

Single amplitude : 0.75mm, 10 cycles for 3 axial directions.

6. Shock 490m/s2, duration of pulse 11ms

at 3 times for 3 both axial directions.

7. Damp heat

(Steady state) Contact resistance : Variation from initial

value 20 mø or less.

Insulation resistance : 100Mø min.

No damage, crack and looseness of parts.

Exposed at 40±2°C, 90~95%, 96h.

8. Rapid change of

temperature

Temperature: -55 ➝ +85°C

Time: 30 ➝ 30 min.

Under 5 cycles(relocation time to chamber: within 2~3min)

Note 1: Includes temperature rise caused by current ﬂ ow.

Note 2: The term "storage" here refers to products stored for a long period prior to board mounting and use.

■Materials

Part Material Finish UL standard

Insulator Header PA Black UL94V-0

Receptacle LCP Black UL94V-0

Contacts Header Copper alloy Contact area: Gold plated

Mounting area: Gold plated ----------------------

Receptacle Phosphor bronze

Metal Fitting Brass Tin plated ----------------------

■Product Number Structure

Refer to the charts below for determining specific part number characteristics.

Please select connectors listed in this catalog when placing orders and be sure to check the latest delivery specifications at the time of ordering the product.

❶ Series name :FX20

❷ Number (contacts):

❸ Connector type S: Receptacle type

P: Header type

❹ Contact pitch :0.5mm

❺ Housing conﬁ guration :SV: Straight type SH: Right angle type

❻ Stacking height type Mating height [mm] =

Height of the receptacle-side + Height of the header-side

●Straight receptacle

FX20 − 60 S − 0.5 SV 10

❶ ❷❸ ❹ ❺ ❻

●Right angle receptacle

FX20 − 60 S − 0.5 SH

❶ ❷❸ ❹ ❺

●Straight header

FX20 − 60 P − 0.5 SV 15

❶ ❷❸ ❹ ❺ ❻

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

Part No. HRS No. Number of contacts A B C D E F G

FX20-20S-0.5SV CL570-1114-7 20 17.4 16.4 4.5 12.65 10 11 20

FX20-40S-0.5SV CL570-1101-5 40 22.4 21.4 9.5 17.65 20 21 40

FX20-60S-0.5SV CL570-1102-8 60 27.4 26.4 14.5 22.65 30 31 60

FX20-80S-0.5SV CL570-1103-0 80 32.4 31.4 19.5 27.65 40 41 80

FX20-100S-0.5SV CL570-1104-3 100 37.4 36.4 24.5 32.65 50 51 100

FX20-120S-0.5SV CL570-1105-6 120 42.4 41.4 29.5 37.65 60 61 120

FX20-140S-0.5SV CL570-1106-9 140 47.4 46.4 34.5 42.65 70 71 140

Unit: mm

Part No. HRS No. Number of contacts A B C D E F G

FX20-20S-0.5SV10 CL570-1115-0 20 17.4 16.4 4.5 12.65 10 11 20

FX20-40S-0.5SV10 CL570-1107-1 40 22.4 21.4 9.5 17.65 20 21 40

FX20-60S-0.5SV10 CL570-1108-4 60 27.4 26.4 14.5 22.65 30 31 60

FX20-80S-0.5SV10 CL570-1109-7 80 32.4 31.4 19.5 27.65 40 41 80

FX20-100S-0.5SV10 CL570-1110-6 100 37.4 36.4 24.5 32.65 50 51 100

FX20-120S-0.5SV10 CL570-1111-9 120 42.4 41.4 29.5 37.65 60 61 120

FX20-140S-0.5SV10 CL570-1112-1 140 47.4 46.4 34.5 42.65 70 71 140

Unit: mm

Contact No. F

Contact No. G

P=0.5±0.15

C±0.2

B±0.3

A±0.3

2.7±0.2

6.8±0.3

Contact No. E Contact No. 1

Polarization mark (1.1)

(1.1)

6.5±0.25

4.5±0.3

8.3±0.3

D±0.3

t=0.2±0.05×w=0.15±0.03

C1.2

A±0.3

B±0.3

C±0.2

Contact No. F

P=0.5±0.15

Contact No. 1

C1.2

Contact No. G

2.7±0.2

6.8±0.3

Contact No. E t=0.3±0.05×w=0.15±0.03

18.3±0.3

Polarization mark (1.1)

(1.1)

6.5±0.25

6±0.3

D±0.3

●Straight receptacle

［ FX20-**S-0.5SV ］

［ FX20-**S-0.5SV10 ］

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

Part No. HRS No. Number of contacts A B C D E F G

FX20-20P-0.5SV15 CL570-1014-2 20 17.4 16.4 4.5 10.4 10 11 20

FX20-40P-0.5SV15 CL570-1001-0 40 22.4 21.4 9.5 15.4 20 21 40

FX20-60P-0.5SV15 CL570-1002-3 60 27.4 26.4 14.5 20.4 30 31 60

FX20-80P-0.5SV15 CL570-1003-6 80 32.4 31.4 19.5 25.4 40 41 80

FX20-100P-0.5SV15 CL570-1004-9 100 37.4 36.4 24.5 30.4 50 51 100

FX20-120P-0.5SV15 CL570-1005-1 120 42.4 41.4 29.5 35.4 60 61 120

FX20-140P-0.5SV15 CL570-1006-4 140 47.4 46.4 34.5 40.4 70 71 140

Unit: mm

Part No. HRS No. Number of contacts A B C D E F G

FX20-20P-0.5SV20 CL570-1015-5 20 17.4 16.4 4.5 10.4 10 11 20

FX20-40P-0.5SV20 CL570-1007-7 40 22.4 21.4 9.5 15.4 20 21 40

FX20-60P-0.5SV20 CL570-1008-0 60 27.4 26.4 14.5 20.4 30 31 60

FX20-80P-0.5SV20 CL570-1009-2 80 32.4 31.4 19.5 25.4 40 41 80

FX20-100P-0.5SV20 CL570-1010-1 100 37.4 36.4 24.5 30.4 50 51 100

FX20-120P-0.5SV20 CL570-1011-4 120 42.4 41.4 29.5 35.4 60 61 120

FX20-140P-0.5SV20 CL570-1012-7 140 47.4 46.4 34.5 40.4 70 71 140

Unit: mm

Contact No. G

B±0.3

A±0.3

C±0.2

Contact No. F

8.7±0.2

2.7±0.2

P=0.5±0.15

Contact No. E

Contact No. 1

t=0.15±0.03×w=0.2±0.05

D±0.15

6±0.3

13.2±0.3

Polarization mark (0.85)

9.5±0.25

(0.85)

4.8±0.15

Contact No.F

Contact No.G

B±0.3

A±0.3

2.7±0.2

C±0.2

P=0.5±0.15

8.7±0.2

(0.85) (0.85)

9.5±0.25

4.8±0.15

Polarization mark

11±0.3

18.2±0.3

Contact No. 1

Contact No.E

t=0.15±0.03×w=0.2±0.05

D±0.15

●Straight header

［ FX20-**P-0.5SV15 ］

［ FX20-**P-0.5SV20 ］

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

Vacuum pick up area

Polarization

mark

Contact No. 1

Contact No. E

Contact No. F Contact No. G

(2) (2)

(5.3)

(5)

6.55±0.3

9.45±0.3

B±0.2

(0.2)

W=0.15±0.03

D±0.2

P=0.5±0.15

C±0.3

7.15±0.3

2.3±0.3

W=0.15±0.03

A±0.2

P=0.5±0.15

10.4±0.3

2.7±0.1

9.5±0.2

●Right angle receptacle

［ FX20-**S-0.5SH ］

Unit: mm

Part No. HRS No. Number of contacts A B C D E F G

FX20-20S-0.5SH CL570-1611-1 20 4.5 16.4 17.4 4.5 10 11 20

FX20-40S-0.5SH CL570-1601-8 40 9.5 21.4 22.4 9.5 20 21 40

FX20-60S-0.5SH CL570-1602-0 60 14.5 26.4 27.4 14.5 30 31 60

FX20-80S-0.5SH CL570-1603-3 80 19.5 31.4 32.4 19.5 40 41 80

FX20-100S-0.5SH CL570-1604-6 100 24.5 36.4 37.4 24.5 50 51 100

FX20-120S-0.5SH CL570-1605-9 120 29.5 41.4 42.4 29.5 60 61 120

FX20-140S-0.5SH CL570-1606-1 140 34.5 46.4 47.4 34.5 70 71 140

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

Unit: mm

** AB

20 4.5 13.46

40 9.5 18.46

60 14.5 23.46

80 19.5 28.46

100 24.5 33.46

120 29.5 38.46

140 34.5 43.46

Unit: mm

** A B

20 4.5 13.46

40 9.5 18.46

60 14.5 23.46

80 19.5 28.46

100 24.5 33.46

120 29.5 38.46

140 34.5 43.46

3.2±0.05

3.2 0

-0.1

A±0.03

P=0.5±0.03

7.1+0.1

SMT pad: 0.3 ±0.03

3±0.05

Stencil (t= 0.15): 0.25 ±0.03

Stencil (t= 0.12): 0.3 ±0.03

3±0.05

B±0.05

(Mating side)

PCB edge

Contact No.1 Contact No. (n/2)

Contact No. (n/2+1) Contact No. n

1max

1.7＋0.1

01.7＋0.1

10.05±0.05

Stencil (t= 0.15): 0.25 ±0.03

Stencil (t= 0.12): 0.3 ±0.03

SMT pad: 0.3 ±0.03

A±0.03

P=0.5±0.03

3.2±0.05

3±0.05 3±0.05

6.85±0.05

B±0.05

P=0.5±0.03

3.2±0.05

A±0.03

3±0.05 3±0.05

10.1+0.1

6.5 0

-0.1

Stencil (t= 0.15): 0.25 ±0.03

Stencil (t= 0.12): 0.3 ±0.03

SMT pad: 0.3 ±0.03

B±0.05

BRecommended PCB layout

(PCB thickness: t= 1.6 mm/Stencil thickness: t= 0.15 mm, t= 0.12 mm）

●Straight receptacle

●Right angle receptacle

●Straight header

FX20-**S-0.5SV

FX20-**S-0.5SV10

FX20-**S-0.5SH

FX20-**P-0.5SV15

FX20-**P-0.5SV20

Unit: mm

** AB

20 4.5 13.46

40 9.5 18.46

60 14.5 23.46

80 19.5 28.46

100 24.5 33.46

120 29.5 38.46

140 34.5 43.46

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

BTray package drawing

Unit: mm

Part No. Quantity ABC

FX20-20S-0.5SV 90 42.5 30 240

FX20-20S-0.5SV10

FX20-40S-0.5SV 80 40 35 245

FX20-40S-0.5SV10

FX20-60S-0.5SV 70 50 37.5 225

FX20-60S-0.5SV10

FX20-80S-0.5SV 60 50 45 225

FX20-80S-0.5SV10

FX20-100S-0.5SV 60 47.5 46 230

FX20-100S-0.5SV10

FX20-120S-0.5SV 50 57.5 52.5 210

FX20-120S-0.5SV10

FX20-140S-0.5SV 50 51.5 55.5 222

FX20-140S-0.5SV10

Unit: mm

Part No. Quantity ABC

FX20-20P-0.5SV15 90 42.5 30 240

FX20-20P-0.5SV20

FX20-40P-0.5SV15 80 40 35 245

FX20-40P-0.5SV20

FX20-60P-0.5SV15 70 50 37.5 225

FX20-60P-0.5SV20

FX20-80P-0.5SV15 60 50 45 225

FX20-80P-0.5SV20

FX20-100P-0.5SV15 60 47.5 46 230

FX20-100P-0.5SV20

FX20-120P-0.5SV15 50 57.5 52.5 210

FX20-120P-0.5SV20

FX20-140P-0.5SV15 50 51.5 55.5 222

FX20-140P-0.5SV20

6

''*

&*,#*

E2&,#*

((#,*

('*

8

E27

&*,#* ((#,*

E2&,#*

''*

6

E27

8

('*

●Straight receptacle

●Straight header

(

225

)

(325)

(C)

(P=B)

(A)

(33.8)

(P=17.5)

(157.5)

●Right angle receptacle

Unit: mm

Part No. Quantity A B C

FX20- 20S-0.5SH 90 42.5 30 240

FX20- 40S-0.5SH 80 40 35 245

FX20- 60S-0.5SH 70 50 37.5 225

FX20- 80S-0.5SH 60 50 45 225

FX20-100S-0.5SH 60 47.5 46 230

FX20-120S-0.5SH 50 57.5 52.5 210

FX20-140S-0.5SH 50 51.5 55.5 222

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

BRecommended Solder

BCleaning condition

BPrecautions

●

This temperature profile is based on the setting conditions shown below and is for reference only. For individual applications,

the temperature profile may vary in accordance with the conditions. Please confirm the profile before mounting.

●Organic solvent-based cleaning

Solvent type Room temperature cleaning Heated cleaning

IPA (Isopropyl alcohol) ○○

●Water based cleaning

When using water based cleaning agents (including terpene, and alkali saponifiers), pay special attention to how the

cleaning agent will react to specific metals and plastics before selecting one of them. Various cleaning agent manufacturers

publish reaction tables for their cleaning agents. Do not leave connectors with moisture remaining on them.

●Caution when washing

The electrical performance may deteriorate if the flux or cleaning detergent is left on the connector after the cleaning.

Check thoroughly to ensure that there is no residue left on any of the surfaces.

●Tolerance clearance on mating

The effective contact length of each product is 1.5 mm. In the mated condition, the header and receptacle shall have a

clearance or gap between them of no more than 1 mm.

Test PCB dimensions : 110 × 50 × 1.6 mm

Material : Glass epoxy

Solder composition : Sn- 3 Ag- 0.5 Cu

Flux content : 11 wt%

Stencil thickness : 0.12 mm, 0.15 mm

Reﬂ ow count : 2 times

Reﬂ ow area : 220°C or more, 60 sec max.

Preheating unit : 150 to 200°C, 90 to 120 sec

* The temperature proﬁ le may vary due to external

conditions such as the type of cream solder,

manufacturer, and board size. Please contact the

solder manufacturer for their speciﬁ cations.

150℃

200℃

220℃

Soldering time

(220°C min.)

140

180

220

160

200

(Peak temperature: 260°C max.)

240

260

(90 to 120 sec)

(60 sec or less)

Pre-heating time

(150 to 200°C)

Temp.(℃)

Header-side connector

Receptacle-side connector

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

● Using excessive force when mating these connectors may result in damage and alter their performance. Although they

are designed with a prevention mechanism to resist incorrect insertion, do not forcibly mate them. Before mating the

connector, confirm the connector polarity as shown below.

●Provide another form of support to the PCB. This connector was not designed to be the main form of support.

●

Mating and un-mating with excessive prying force or rotating force may result in damage to the connector or contact failure.

If you have no choice but to mate and un-mate with prying force based on your usage environment, use a point as a pivot

shown by Δ mark in the figure below when you apply those forces. The point shall be a certain distance away from the

connector end and has equal or higher height of the mating height.

(Please refer to the guideline for details including the relationship between the pivot position and the connector position,

and usage examples.)

● This connector has a floating structure, but the floating range may vary depending on the height of connector on the

header side (which has a floating mechanism).

Header-side Receptacle-side Stack height Floating range

X direction (longitudinal direction) Y direction (transverse direction)

FX20-**P-0.5SV15 FX20-**S-0.5SV 15mm 0.6mm 0.6mm

FX20-**P-0.5SV20 20mm 0.8mm 0.6mm

FX20-**P-0.5SV15 FX20-**S-0.5SV10 25mm 0.6mm 0.6mm

FX20-**P-0.5SV20 30mm 0.8mm 0.6mm

FX20-**P-0.5SV15 FX20-**S-0.5SH --------------- 0.6mm 0.6mm

FX20-**P-0.5SV20 --------------- 0.8mm 0.6mm

C surface

Δ Mark (polarization mark)

Header-side connector

Receptacle-side connector

Δ Mark (polarization mark)

* Mate them so that both C surfaces or both Δ

marks on the connector outer surface are aligned.

h=15mm h=30mm Right angle connection

Y direction (transverse direction)

Y direction (transverse direction) Y direction (transverse direction)

X direction

(longitudinal direction)

X direction

(longitudinal direction) X direction

(longitudinal direction)

Minimum of

25 mm Minimum of

30 mm

Stacking height or higher Stacking height or higher

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

● If the right angle type connector is positioned too far back from the recommended connector mounting position, the

straight type connector will make contact with the PCB, and these may lead to damaged product or abnormal

connections.

The location of right angle type SMT pad should be set to within 1 mm from the edge of the PCB, and the mounting

position should be set so that the clearance from the head of the connector to the edge of the PCB is 1.3 mm or less.

1.0mm MAX

1.3mm MAX

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

MEMO :

FX20 Series●0.5 mm Pitch, Board to Board Connector with Floating Structure

USA:

HIROSE ELECTRIC (U.S.A.), INC. San Jose Office

3255 Scott Boulevard, Building 7, Suite 101

Santa Clara, CA 95054

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hiroseusa.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. Headquarters

2688 Westhills Court, Simi Valley, CA 93065-6235

Phone : +1-805-522-7958

Fax : +1-805-522-3217

http://www.hiroseusa.com

HONG KONG:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

Phone : +852-2803-5338

Fax : +852-2591-6560

http://www.hirose-hongkong.com.hk

CHINA:

HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. Beijing Branch

A1001, Ocean International Center, Building 56# East 4th

Ring Middle Road, Chao Yang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

http://www.hirose-china.com.cn

TAIWAN:

HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei

Phone : +886-2-2555-7377

Fax : +886-2-2555-7350

http://www.hirose-taiwan.com.tw

GERMANY:

HIROSE ELECTRIC EUROPE B.V. German Branch

Herzog-Carl-Strasse 4 D-73760 Ostfildern

(Scharnhauser Park)

Phone : +49-711-4560-02-1

Fax : +49-711-4560-02-299

http://www.hirose.de

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office

Unit No.03, Ground Floor, Explorer Building International Tech

Park Whitefield Road, Bangalore 560066 Karnataka, India

Phone : +65-6324-6113

Fax : +65-6324-6123

http://www.hirose-singapore.com.sg

SINGAPORE:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

10 Anson Road #26-1 International Plaza

079903

Phone : +65-6324-6113

Fax : +65-6324-6123

http://www.hirose-singapore.com.sg

THE NETHERLANDS:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : +31-20-6557460

Fax : +31-20-6557469

http://www.hiroseeurope.com

UNITED KINGDOM:

HIROSE ELECTRIC EUROPE B.V. UK Branch

22 Vincent Avenue, Crownhill Business

Centre, Crownhill, Milton Keynes, MK8 0AB

Phone : +44-1908-305750

Fax : +44-1908-305768

http://www.hirose.co.uk

USA:

HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)

37677 Professional Center Drive, Suite #100C

Livonia, MI 48154

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hiroseusa.com

CHINA:

HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD.

1601,Henderson Metropolitan,NO.300 ,East Nanjing

Road,Huangpu District, Shanghai,China 200001

Phone : +86-21-6391-3355

Fax : +86-21-6391-3335

http://www.hirose-china.com.cn

CHINA:

HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre

5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

http://www.hirose-china.com.cn

KOREA:

HIROSE KOREA CO., LTD.

1261-10, Jeoungwhang-Dong, Shihung-City,

Kyunggi-Do 429-450

Phone : +82-31-496-7000,7124

Fax : +82-31-496-7100

http://www.hirose.co.kr

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office

Suite No. 606 5th Floor SB Tower 1A/1 Sector

16 A Filmcity Noida 201301 Uttar Pradesh-India

Phone : +91-120-4804917

Fax : +91-120-4804949

http://www.hirose.com/sg/

MALAYSIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office)

1-10-07, Suntech @ Penang Cybercity (1164),Lintang

Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.

Phone : +604-619-2564

Fax : +604-619-2574

http://www.hirose.com/sg/

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 3/2014. Contents are subject to change without notice for the purpose of improvements.

6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com