Major ratings and characteristics
Values Units Device optimized for high temperature
20 A Power Supply applications
100 V
0.67 V, typ
-65 to 175 OC
ELECTRICAL: MECHANICAL:
* Low Forward Voltage Drop
* Reliable High Temperature Operation ITO-220 packages
* Super Barrier Design
* Softest, Fast Switching Capability
* 175OC Operating Junction Temperature
www.apdsemi.com Version 2.0 - April 2006 1
SBR20100CTF SBR20100CTI
ITO-220 TO-262 TO-263
SBR20100CT
* Molded Plastic TO-220AB, TO-262, TO-263, and
SBR20100CTF
SBR20100CTB
TO-220AB
SBR20100CTI
Tj (operating/storage)
Using state-of-the-art SBR IC process technology,
the following features are made possible in a single device:
Characteristics
IF(AV) Rectangular Waveform
VF@10A, Tj=125OC
VRRM
SBR20100CTB
_
______________________________________________________________________________________________
_
SBR20100CT
Case Styles
13
2
Anode
Common
Cathode Anode
13
2
Anode
Common
Cathode Anode
13
2
Anode
Common
Cathode Anode 13
2
Anode
Common
Cathode Anode
SYMBOL UNITS
VRM
VRWM
VRRM
Volts
IOAmps
IFSM Amps
IRRM Amps
VFVolts
IR * uA
mA
dv/dt V/uS
RθJC OC/W
TJOC
* Pulse width < 300 uS, Duty cycle < 2%
www.apdsemi.com Version 2.0 - April 2006 2
Peak Forward Surge Current - 1/2 60hz
DC Blocking Voltage
Working Peak Reverse Voltage
Peak Repetitive Reverse Voltage
Maximum Ratings and Electrical Characteristics
(at 25OC unless otherwise specified)
SBR20100CTF
SBR20100CT
100
Typ
---
---
Max
0.82
0.75
SBR20100CTB
SBR20100CTI
Instantaneous Forward Voltage (per leg)
IF = 10A; TJ = 25OC
IF = 10A; TJ= 125OC
Average Rectified Forward Current
(Rated VR-20Khz Square Wave) - 50% duty
cycle
_
______________________________________________________________________________________________
_
Peak Repetitive Reverse Surge Current
(2uS-1Khz)
120
20
-65 to +175
2
4
2
Maximum Rate of Voltage Change
(at Rated VR)
Maximum Instantaneous Reverse Current at
Rated VRM
TJ = 25OC
TJ = 125OC
Max
100
10
10,000
Typ
---
---
Operating and Storage Junction Temperature
Maximum Thermal Resistance JC (per leg)
Package = TO-220AB, TO-262, & TO-263
Package = ITO-220
Figure 2: Typical Forward Voltage
www.apdsemi.com Version 2.0 - April 2006 3
_
______________________________________________________________________________________________
_
SBR20100CT
SBR20100CTF
Figure 1: Typical Reverse Current
SBR20100CTI
Figure 3: Current Derating, Case
SBR20100CTB
APD SEMICONDUCTOR reserves the right to make changes without further notice to any products herein. APD SEMICONDUCTOR makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does APD SEMICONDUCTOR assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APD SEMICONDUCTOR data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APD SEMICONDUCTOR does not convey any license
under its patent rights nor the rights of others. APD SEMICONDUCTOR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the APD SEMICONDUCTOR product could create a situation where personal injury or death may occur. Should Buyer
purchase or use APD SEMICONDUCTOR products for any such unintended or unauthorized application, Buyer shall indemnify and hold APD SEMICONDUCTOR and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or
unauthorized use, even if such claim alleges that APD SEMICONDUCTOR was negligent regarding the design or manufacture of the part..
0
5
10
0 25 50 75 100 125 150 175
Tc, Case Temp (C)
If, Average Forward Current (Amps)
0.001
0.01
0.1
1
10
100
0 20406080100
Vr, Reverse Voltage (Volts)
Ir, Reverse Current (mA)
Tj=25C
Tj=125C
Tj=75C
Tj=175C
0.1
1
10
100
0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90
Vf, Instantaneous Forward Voltage (Volts)
If, Instantaneous Forward Current (Amps)
Tj=25C
Tj=125C
Tj=175C
Tj=75C
1 Lagoon Drive, Suite 410, Redwood City, CA 94065, USA
Ph: 650 508 8896 FAX: 650 508 8865
Homepage: www.apdsemi.com
email: info@apdsemi.com
