MICROMOT System Precision equipment for cutting. Small and comfortable. Die-cast aluminium heads. Belt sander BSL 220/E 220-240 VOLT gfjk 3 VA f jdsgjd 3VA ofjdk g dojfk dlg,d dlfida V sdgb d dgfdl 12 dgj lg kgfjk jd 3 VA dofjd g sgj l f dojfk dlg,d dlfida V sdgb d dgfd 12 dgj lg 3VA VA 12 VA 12 VA 12 A 12V A 12V VA 12 For shape finishing, mortising, fine polishing (flat surfaces). Also for de-burring metal, paint removal and fine finishing. Head of die-cast aluminium, and full wave electronic speed control. Sanding belt can be changed in a matter of seconds. Complete with 2 off 80 and 2 off 180 grit belts. Technical data: Belt size 10 x 330mm and usable sanding area 10 x 110mm. Belt speed electronically controllable from 300 - 700rpm. Mains voltage 220 240V. 100W max power consumption. 13,000rpm. Stable head of diecast alu and POLYAMIDE main housing. Length 350mm, and weight approx 650g. Run down time less than 1 second. Insulated to class 2. No 28 536 Replacement corundum sanding belts 10 x 330mm The head rotates through 60. on tough, woven backing. Sands metal, non-ferrous metals, wood and plastics efficiently No 28 581 No 28 582 No 28 583 180 grit set of 5 120 grit set of 5 80 grit set of 5 Super jig saw SS 230/E 220-240 VOLT The alternative 12V jig saw STS 12/E is described on page 12. This unit offers fantastic cutting capacity with footplate adjustable up to 45 for mitre cuts. The housing head is in die-cast aluminium. The stroke speed is variable by means of full wave electronic speed control. Ideal for tight curves in wood (up to 12mm), PC cards and non-ferrous metals to 3mm. Technical data: Stroke speed of 2,000 - 4,500/min. Mains voltage 220 - 240V, 100W max power concumption. 13,000rpm. Stable head of diecast alu and POLYAMIDE main housing. Length 230mm, and weight approx 700g. Insulated to class 2. Packed in a sturdy plastic case, complete with 4 super cut blades of various pitches for wood, plastic and metal. Jig saw blades. Special steel. Pitch of 1.06mm, teeth ground & set. Usable on hard & soft woods, plywood, fibreglass reinforced sheets as well as various plastics. Ideal for tight curves and clean cuts. Fits SS 230/E and STS 12/E. No 28 054 Pack of 2 Jig saw blades. HSS Tooth pitch of 1.5mm, with teeth set & ground. Usable on metals, aluminium and softer alloys, fibreglass, Plexiglass and insulating materials. Fits SS 230/E and STS 12/E. No 28 056 Pack of 2 No 28 530 7