NEXT FILE Type N I S S E I UP AMC POLYESTER FILM CAPACITOR Features AMZ Very small, especially in H dimension which is of great use to save space of PC Board with height limits. Straight lead type Specifications 50V. d.c. Max W 0.000470.00082(E-12) 0.000470.10 0.00100.10(E-24) Cap. tolerance 10 Tangent of loss angle 0.008at 1KHz) or less Insulation resistance 30,000 M or more Max T 3.0Max P 0.5 -0.2 Endurance 85. 70V.d.c. 1000hr C/C 3 -5 within tan 0.011 or less IR 950M or more Damp heat 40. 9095RH 50V.d.c. 500hr C/C 6 -0 within tan 0.012 or less IR 9000M or more Marked temperature shows operatable range when voltage derated. 050 Max H Capacitance 20Min 0050 0000 1.0Max Voltage Style 1 -40+85+105 Cap Cap range Temp range Single formed lead type 2.0Max 5.00.5 d0.05 AMC 50V. d.c (P=5) 471333 AMC 50V d.c 471104 5.00.5 F 0.5 F 0.5 AMC 50V. d.c 363104 AMC 50V. d.c 471333 F P For a pitch space (F) of the taping specification, refer to "TAPING DIMENSION"on p.5. 1 P 4 Lead dimensionRefer to lead dimensien on P 4 Dimensions(mm) Type WV AMC E-12 CapF 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 AMC 50V d.c. W 5.2 5.0 H 5.0 T 3.0 2.7 2.5 P 3.5 AMC 50V d.c.(P=5) F 5.0 d 0.45 W 7.0 H 5.0 T 3.0 P 5.0 d 0.45 2.8 5.2 7.3 5.0 3.0 2.7 5.2 5.5 5.8 6.0 6.2 5.5 3.0 3.2 3.5 3.8 7.5 3.3 5.3 6.0 6.7 7.5 8.0 7.2 7.5 8.2 8.5 4.0 3.8 5.0 7.0 0139 P4 Model code 0139 Refer to Model code on P4 4.3 4.2 4.3 4.8 5.0 0000 P 4 Model code 0000 Refer to Model code on P4 8-14 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 15 - NISSEI PART NUMBER CODE SYSTEM (1) (2) Type (3) Lead Internal con fig use uration (4) Rated voltage (5) CapacitanceCapacitance tolerance value Model Code (Standard "0000") (6) Lead Dimensions Packing Mode code *2 (2) Lead configuration code Code *1 C Lead configuration Typical Code Samples Straight lead Single formed (leads) 5.0 Code 0200 22.5 0225 25.0 0250 27.5 0275 0125 0150 Style Code 1 0200 *4 2 D200 3 D210 Formed leads type Lead taping for automatic insertion machine (Straight leads) 0175 20.0 Lead spacing (F) after forming indicated as multiplied by 10.Always in bulk Type S 17.5 0100 15.0 Lead taping for automatic insertion machine (Formed leads) Code 0075 12.5 Double formed (leads) Lead length multiplied by 10.Always in bulk F (mm) Lead spacing 0050 *3 10.0 V No lead processing and always in bulk (0000) 0050 Cut shorter (cut leads) 7.5 D Description 0000 F (mm) Lead spacing F (6) Lead dimension /Packing mode 4 D220 5 0200 6 0200 Single / Double-formed leads taped and ammo-packed. See p.5 to 6. 0200 (AMZ50V& Straight leads taped and ammo-packed. See p.5 to 6. AMC:C220) Straight leads type *1 The blank square signifies a straight lead type. *2 some types could bear different lead dimension codes, to be confirmed each case. As to reel packing, contact Nissei. *3 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "1050". *4 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "A210". (3) Rated Voltage (V.d.c,V.a.c) Voltage Code 25 35 50 63 100 125 200 250 275 315 400 450 630 800 1000 1250 1600 0025 0035 0050 0063 0100 0125 0200 0250 0275 0315 0400 0450 0450 0800 1000 1250 1600 (4) Capacitance Tolerance Code F G H J K M Tolerance (%) +/- 1 +/- 2 +/- 3 +/- 5 +/- 10 +/- 20 (5) Capacitance Code Capacitance (pF) expressed in 3-digit code. The first two digits: Significant figures of capacitance value. The third digit: The number of zeros to follow the significant figures. Coding Sample 1) Coding of: AMZ 50V, 0.10 microF, +/-5%, SINGLE formed, taped and ammo-packed AMZ V (1) (2) Internal use 0050 (3) J 104 (4) (5) 0000 0200 Model Code (6) (Standard "0000") 2) Coding of MMC 250V 1.0 F +/-10%, single formed with 15.0mm leads, in bulk MMC F (1) (2) Internal use 0250 K 105 (3) (4) (5) 0000 0150 Model Code (6) (Standard "0000") 3) Coding have: MMT 50V 0.1 microF +/-5%, straight lead (in bulk) MMT (1) 0050 (2) Internal use (3) J 104 (4) (5) 0000 0050 Model Code (6) (Standard "0000") When using our capacitors, please consider the application notes on pages 8-15 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics.