Patchbays, Patchcords &
Molded Cable Assemblies
Connectors and Adapters Jacks and Plugs
Pro Audio & Broadcast Catalog
Sixth Edition
w w w . s w i t c h c r a f t . c o m
Guitar Switches
Switchcraft, Inc. was established in 1946 to
manufacture jacks, plugs, and switches. We
have since become the industry leader in
producing a wide variety of connectors, adapters,
jacks and plugs, patchbays, jackfields, and
switches. While our products cover a diverse
number of markets, this catalog focuses on our
line of audio and video products, typically found
in broadcast, recording, sound reinforcement,
and other pro audio applications.
Some of the new products you’ll find in this
catalog include our EZ Norm Series of audio
patchbays, where normal configurations can be
changed from the front of the patchbay, using a
standard screwdriver. Also found in this edition
are new combination audio/video patchbays
in both standard/long-frame and midsize/bantam
styles. In the connector section, we’re offering
a new line of connectors called our EH Series,
incorporating a wide range of connectors (Firewire,
USB, Category 6, BNC, RCA, and more) in a
standard XLR housing.
Please keep in mind that this is just a small
sampling of our complete product lines. For
more detailed information, we offer our “full
line” catalog, our Engineering Design Guide.
Our Engineering Design Guide includes over
5,000 part numbers covering all five major
product lines. If you don't see it here, chances
are you'll find it in the EDG. And again, keep in
mind that the EDG is also just a "snapshot" of
our capabilities. We manufacture over 30,000
part numbers, so if it's not in the EDG, please
contact us with your requirements. To keep up
on all the new products we have to offer, visit
our website at www.switchcraft.com and look
for the New Product Showcase.
About Switchcraft, Inc. 1
Patchcords/Molded Cables 44 – 45
Connector Series 46 – 62
Audio Adapter Series 63 – 64
Jack Series 65 – 82
Plug Series 83 – 93
Switch Series 94 – 96
Index 98 – 100
Patchbay Series 4 – 43
Detailed Table of Contents — Pages 2 – 3
* Please visit the product pages on our website for the most up-to-date product information
2
Connectors
Q-G® Audio Connector Series ..............................46-48
A, AA, AAA Cord Style Series ................................46
B, C, D, E Panel Style Series....................................47
J, K, P, R, T Wallplate, Gooseneck,
Panel & Cord Style Series........................................48
Tini-Q-G® Connector Series ......................................49
Tini-Q-G® Cord & Panel Style Series ....................49
HPC Connector Series ............................................50-51
HPC Panel Style Series ............................................50
HPC Cord, & Adapter Style Series..........................51
EH Series Receptacles ................................................52
MIDI and 2500 Series ..................................................53
HP75BNC Series ..........................................................54
Connector Dimension Drawings ..........................55–62
HP75BNC Series, EH Series ....................................55
Q-G Audio - A, AA, AAA Series ..............................56
Q-G Audio - B, C, D, E Series ..................................57
Q-G Audio - J, K, P, R Series....................................58
Q-G Audio - T Series ................................................59
MIDI, Q-G Audio - P Series ......................................60
HPC Panel Style Series ......................................61–62
Audio Adapters
XLR to XLR, RCA, 1/4", TQ-G Adapter Series ..........63
1/4" to 1/4", RCA; RCA to RCA;
& Miscellaneous Adapter Series ................................64
Table of Contents
Patchbays
Professional Punchdown Terminal (PPT) ....................4
Audio Patchbay Series ............................................5–33
MTPH/TTPH Harness Series ..................................5-7
Front Access Series ................................................8–9
EZ Norm Patchbay Series..................................10–11
RS 422 Data Patchbay Series ............................12–13
MTP48K Wired Series ........................................14–15
TTPW96K Wired Series ......................................16–17
MTPBP/TTPBP Backpanel Series ......................18–19
TT96 EDAC Series ..............................................20–21
TTP96K Patchkit Series ......................................22–23
MT48K/MT52K Patchkit Series ..........................24–25
MT48/MT52 Patchbay Series ............................26–27
TTP96AS Patchbay Series..................................28–29
HPC Patchbay Series ..........................................30–31
Q-G®Patchbay Series ........................................32–33
Video/Audio Patchbay Series................................34–44
VPP Video Patchbay Series................................34–36
MVP Midsize Video Patchbay Series................37–39
VAP Video/Audio Patchbay Series ....................40–41
MVEZN Audio/Midsize Patchbay Series....................42
MBPK Video/Audio Patchbay Series ......................43
Audio and Video Patchcords ................................44–45
* Please visit the product pages on our website for the most up-to-date product information
Jacks & Plugs
Jack Series
Littel Phone, Hi-D, Right Angle PC Mount 1/4", 1/4"
Extension Jack Series ..............................................65
Thick Panel/Guitar, Locking 1/4", Tini, Tini-
Extension, Micro, 3.5mm ........................................67
Phono, Phono Extension, TT or Bantam, MT 1/4”
Jack Series ................................................................69
Power/Jacks Plugs Series – 700, S700,
800 Cord & Panel Style Series ................................71
Jack Series Dimension Drawings ........................72–82
Littel Phone, Hi-D, 1/4” Extension, 700 Panel Jack
Series ........................................................................72
Littel Phone, Hi-D, 1/4” Extension Jack Series......73
Right Angle PC Mount 1/4” Jack Series ................74
Thick Panel/Guitar, Locking 1/4”, Tini, Tini
Extension Jack Series ..............................................75
Micro, 3.5mm Jack Series ......................................76
3.5mm Jack Series..............................................77–79
Phono and Phono Extension Jack Series ..............80
TT or Bantam Jack Series........................................81
MT 1/4” Jack Series..................................................82
Plug Series
Littel 1/4”, Right Angle 1/4”, Silent, Super Heavy
Duty Plug Series ......................................................83
Tini, Micro, 3.5mm Stereo, Right Angle 3.5mm
Stereo, Phono, Right Angle Phono Plugs Series ..85
TT or Bantam, Mil-Style 1/4” Plugs Series ............87
Plug Series Dimension Drawings ........................88–93
Littel Plug 1/4” Series ..............................................88
Littel Right Angle 1/4”, Silent, Super
Heavy Duty Plug Series ..........................................89
Tini, Micro Plug Series ............................................90
35HD 3.5mm Stereo Plug Series ............................91
Phono and Phone Right Angle Plug Series ..........92
TT or Bantam, Mil-Style 1/4” Plug Series ............93
Switches
Switch Series ..........................................................94–95
Switch Series Dimension Drawings ..........................96
Limited Lifetime Warranty
Switchcraft warrants all of its products to be of sound
design, good materials and workmanship at the time of
manufacture.
Switchcraft will repair or replace at its discretion any
product proven to be defective under normal use.
Switchcraft’s liability under the terms of this warranty
is limited to the repair or replacement of defective products
which have not been damaged through accident, abuse,
misuse or unauthorized repair. Switchcraft shall in no
case be liable for special or consequential damages of
any nature.
3
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
3
3
Table of Contents
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
4
Our Patchbays Have Just
Rounded A New Corner
Actually, the corners we rounded
belong to our patchbays’ revolutionary,
new Professional Punchdown Terminal
(PPT), making it perfectly compatible
with the industry standard. We realized
that achieving a new industry standard
meant we couldn’t cut any corners to
get there.
The PPT design incorporates a
split-barrel design and a more rugged,
thicker housing to minimize the
impact of repeated punchdowns.
The split-barrel design eliminates
the problems associated with the
old “V-shaped” terminal designs.
The PPT design distributes pressure
evenly across both sides of the
terminated wire, causing improved
wire retention plus more reliable
connections. The serrated teeth in
the plastic housing firmly grip the
wires, which also greatly improves
wire retention. With the PPT, multiple
wires can be terminated to a single
contact, and a wide range of wire
gauges can be used.
Look for Switchcraft’s PPT in our MTP and TTP Series of audio patchbays, and in our new Backpanel Series.
All Switchcraft audio patchbays incorporate heavy gauge materials and our high quality nickel-plated, steel framed
jacks. Gold-plated, crossbar contacts come standard!
Materials
Housing: Thermoplastic (UL 94V-0)
Contacts: High strength copper alloy, tin plated
Wire size: Accommodates #22, 24, or 26 AWG, stranded or solid
Our Patchbays Now Feature the New
Professional Punchdown Terminal (PPT)
Accessories
Part Number Description
K459 PPT replacement kit consists of
15 of each color* (IDC/IDC)
K460 PPT replacement kit consists of
15 of each color (IDC/wirewrap)
PT1LA PPT impact punchdown tool
PT2B Replacement bit for PT1LA tool
*Colors consist of red, black, white, yellow, blue, and
orange.
* Please visit the product pages on our website for the most up-to-date product information
MTPH48K3NO
PATCHBAYS
5
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
MTPH/TTPH Harness Series
Features and Benefits
• Units feature either 48 MT style
jacks or 96 TT style jacks on the
front panels, to a 4 foot harness,
out to a backpanel with PPT’s
• All versions utilize AES/EBU
wiring for complete digital
compatibility
• Attractive, corrosion resistant
nickel-plated, steel frame jacks
• Gold-plated switching contacts
reduce contact resistance,
improve reliability
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Zinc-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel:
Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic
polyester
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500 VAC at 60 Hz
Working Voltage: 140 VDC maximum
Current Rating: 100 milliamps
The MTPH and TTPH Harness Series utilize standard front panel assemblies, a
4-foot cable harness, and our standard back panel assemblies. Primarily used
where the back panels must either be mounted into a rack, or brought back to the
front for easier access. Custom cable lengths can also be supplied. Contact the
factory for details.
DIGITAL
AES / EBU
Digital Ready!
Ordering Information
Type No. of
Part Number of Jack Jacks Description
MTPH48K1NS MT 48 1.75" High front panel, 4’ Harness,
3.5" High back panel, normals strapped
MTPH48K1NO MT 48 1.75" High front panel, 4’ Harness,
3.5" High back panel, normals brought out
MTPH48K3NS MT 48 3.5" High front panel, 4’ Harness,
3.5" High back panel, normals strapped
MTPH48K3NO MT 48 3.5" High front panel, 4’ Harness,
3.5" High back panel, normals brought out
MTPH48K3SNO MT 48 3.5" High front panel, 4’ Harness, 3.5" High
back panel, sleeve normals brought out
TTPH96K1NS TT 96 1.75" High front panel, 4’ Harness,
3.5" High back panel, normals strapped
TTPH96K1NO TT 96 1.75" High front panel, 4’ Harness,
5.25" High back panel, normals brought out
TTPH96K3NS TT 96 3.5" High front panel, 4’ Harness,
3.5" High back panel, normals strapped
TTPH96K3NO TT 96 3.5" High front panel, 4’ Harness,
5.25" High back panel, normals brought out
See Next Page for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
6MTPH/TTPH Harness Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
7
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
MTPH/TTPH Harness Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
8
Features and Benefits
• Easy slide-out tray slides forward
for easy re-termination from the
front of the rack
• Available with either 48 MT style
or 96 TT style jacks in a 1RU
space
• Attractive, corrosion resistant
nickel-plated, steel frame jacks
• Gold-plated switching contacts
reduce contact resistance,
improves reliability
• Extra wide designation strips
for easy channel identification
• Rugged, attractive black
epoxy-finished steel chassis
• Configurations available include
normals strapped and normals
brought out
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Nickel-plated
steel
Welded Contacts: Gold alloy
Panel
Frame: C.R.S. black epoxy
painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic 94V-0
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: -20˚C to +65˚C
Electrical
Jack Contact Resistance:
30 milliohms initial maximum;
50 milliohms after life
Jack Insulation Resistance:
10,000 megohms maximum
Dielectric Withstanding Voltage:
500V at 60 Hz AC
Working Voltage: 100 milliamps or
less; maximum 56.5 VDC
Front Access Series
Ordering Information
Part Number Type of Jack No. of Jacks Description
TTPFA96K1NS TT 96 1.75" High, normals strapped
TTPFA96K1NO TT 96 1.75" High, normals brought out
MTPFA48K1NS MT 48 1.75" High, normals strapped
MTPFA48K1NO MT 48 1.75" High, normals brought out
The Front Access Series offers the end user the ease of re-terminating patchpoints
from the front of the rack as opposed to the back. A slide out tray allows the user
to slide out the punchdown terminals and reconfigure the unit. An easy release
mechanism on either side of the unit allows it to be pushed back into place and
easy to grip locking nuts tighten the unit in place.
TTPFA96K1NS
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
9
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Front Access Series
* Please visit the product pages on our website for the most up-to-date product information
TTEZN****0
PATCHBAYS
10 EZ Norm Patchbay Series
Center Strip Removes For
Normalling Access
Easily Normal The Jacks By Rotating To “Full”,
“Non,” Or “Half” Positions
Specifications
Materials
Jacks
Housing & Cover: 94V-0 rated thermoplastic
Sleeve Collar: Nickel plated copper alloy
Tip, Ring, Shunt, & Sleeve Springs: Nickel Silver
with welded contacts
Welded Contacts: Gold
Cam Switching Springs: Silver plated copper alloy
Cam Switching Contacts: Silver plated copper alloy
Mechanical
Jack Mechanical Life: 30,000 cycles
Cam Contact Mechanical Life: 30,000 cycles
Insertion - Withdrawal Forces: 1 - 4 lbs.
Moisture resistance: MIL-STD 202 Method 106
Thermal shock: MIL-STD 202 Method 107
Salt spray: MIL-STD Method 101 (48 hrs.)
Vibration: MIL-STD 202 Method 213
Electrical
Jack Spring Contact Resistance: 30 milliohm
Maximum
Cam Switch Contact Resistance: 30 milliohm
Maximum
Insulation Resistance: 10,000 Megaohms
Dielectric Withstanding Voltage:
500 VAC (rms) at 60 Hz
Insertion Loss: -0.5dB up to 10 MHz
EZ Norm Patchbay Options
• 1RU can be terminated to EDAC or Cannon DL,
solder terminals, or wire-wrap terminals
• 1.5RU can be terminated to EDAC/Cannon DL,
solder terminals, wire-wrap terminals, plus 3 pin
connectors, or our own PPT Professional
Punchdown Terminal
• 2RU Same as above
• All units will be offered with or w/o docking connector
• Unwired units will be offered with either cable tie
bar or cable tray
The EZ Norm offers a simplified method for setting up and changing
normals to a Bantam/TT patchbay. Simply remove the middle
designation strip, and rotate the center cam, using a standard
screwdriver. An audible “click” can be heard as you rotate from
full normals to no normals to half normals. An opaque marking
strip is included to conceal the normal position, if needed.
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
11
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
EZ Norm Patchbay Series
TT TT SIZE JACKS
EZN EZ-NORM CAM JACKS
_ REGULAR UNIT
H HARNESS UNIT (UMBILICAL)
10 1 RACK UNIT HEIGHT
15 1.5 RACK UNIT HEIGHT
20 2 RACK UNIT HEIGHT
_ UNWIRED
P PRE WIRED
_ NO DOCKING
D DOCKING CONNECTOR
E90 EDAC/ELCO 90 PIN CONNECTOR
E56 EDAC/ELCO 56 PIN CONNECTOR
E38 EDAC/ELCO 38 PIN CONNECTOR
IDC IDC PPT TERMINALS
3PIN 3 PIN CONNECTORS
WW WIRE WRAP PINS
SL SOLDER LUGS
CDL CANNON DL 96 PIN CONNECT ORS
FA FRONT ACCESS WITH PPT
_ NO REAR SUPPORT
T CABLE TRAY
B CABLE BAR
}
}
}
}
}
}
UNWIRED ONLY
Harness Assembly
Front Access
Racks
The EZ Norm comes in 3 different rack heights, 1RU, 1.5RU, and 2 RU.
The Front Access option offers a
slide-out tray, allowing the end
user to re-terminate the patch-
bay from the front of the rack.
The EZ Norm is also offered as a
harness assembly, with a standard
harness of 4 ft. Custom lengths are
available, call Switchcraft®for details.
TT EZN _ 10 _ _ E90 IDC SL _
H 15 P D E56 3PIN CDL T
20 E38 WW FA B
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
12
Features and Benefits
• Unit Features either 8,16, 24, or 32 TT style
jacks on the front Panels, to a 9 pin D-Sub.
• All versions utilize low capacitance internal
wiring for maximum performance of
transferring data
• All standard units are available 1 or 2 rack
units high (1.5 RU available by request)
• Rugged, attractive black epoxy finished
steel frame chassis
Specifications
Electrical
Internal Wiring:
24 AWG Solid TC, foils shield
Nom Capacitance: 11.5 pF/ft between conductors
21.3 pF/ft between one conductor and conductor
connected to the shield
Nom. Impedence: 110 Ohms
Ordering Information
Part No. of Front Panel Back Rack
Number* Jacks Layout Plane Height
RS422H4N081 2 x 8 Horizontal 9 Pin D-Sub 1
RS422V4N081 2 x 8 Vertical 9 Pin D-Sub 1
RS422H4N161 2 x 16 Horizontal 9 Pin D-Sub 1
RS422H4N162 2 x 16 Horizontal 9 Pin D-Sub 2
RS422V4N161 2 x 16 Vertical 9 Pin D-Sub 1
RS422V4N162 2 x 16 Vertical 9 Pin D-Sub 2
RS422H4N242 2 x 24 Horizontal 9 Pin D-Sub 2
RS422V4N242 2 x 24 Vertical 9 Pin D-Sub 2
RS422V4N322 2 x 32 Vertical 9 Pin D-Sub 2
*Add “N” for non-normalled version
RS 422 Data Patchbay Series
Our standard RS data jackfield series offer a multiple combination of
ports, rack heights, and back panel terminations which will easily fit
into any television broadcast or video production where custom data
patching is required. Custom ports and rack height combinations can
be supplied. Contact the factory for details.
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
13
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
RS 422 Data Patchbay Series
RS422V4N322
32 Ver tical Paired Jacks
Front and Back Views
RS422H4N242
24 Horizontal Paired Jacks
Front and Back Views
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
14
Features and Benefits
• Unit features 48 MT style jacks
in either 1RU (1.75" H) or 2RU
(3.5" H) spaces
• All versions utilize AES/EBU
wiring for complete digital
compatibility
• Attractive, corrosion resistant
nickel-plated, steel frame jacks
• Gold-plated switching contacts
reduce contact resistance,
improve reliability
• Rugged, attractive black epoxy-
finished steel chassis
• Extra wide designation strips for
easy channel identification
• 1RU version configurations include
normals strapped and normals
brought out
• 2RU version configurations include
normals strapped, normals
brought out, and sleeve normals
brought out
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Zinc-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel:
Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic
polyester
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: O˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500 VAC at 60 Hz
Working Voltage: 140 VDC
maximum
Current Rating: 100 milliamps
DIGITAL
AES / EBU
Digital Ready!
Ordering Information
Part Number Type of Jack No. of Jacks Description
MTP48K1NS MT 48 1.75" High, normals strapped
MTP48K3NS MT 48 3.5" High, normals strapped
MTP48K1NO MT 48 1.75" High, normals brought out
MTP48K3NO MT 48 3.5" High, normals brought out
MTP48K3SNO MT 48 3.5" High, sleeve normals out
The MTP Series was developed with the AES/EBU digital standard in mind.
All versions are made with 110 Ohm cabling inside as a standard. Available in
a wide variety of configurations.
MTP48K3NO
MTP48K Wired Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
15
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
MTP48K Wired Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
16
TTPW96K3NS
TTPW96K Wired Series
Features and Benefits
• Unit features 96 TT style jacks in
2RU (3.5"H) space
• Utilizes AES/EBU wiring for
complete digital compatibility
• Attractive, corrosion resistant
nickel-plated, steel frame jacks
• Gold-plated switching contacts
reduce contact resistance, improve
reliability
• Rugged, attractive black epoxy-
finished steel chassis
• Extra wide designation strips for
easy channel identification
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel
silver with welded contacts
Assembly Screws: Zinc-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel:
Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic
polyester
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500 VAC at 60 Hz
Working Voltage: 140 VDC
maximum
Current Rating: 100 milliamps
Ordering Information
Part Number Type of Jack No. of Jacks Description
TTPW96K1NN TT 96 1.75" High, non-normals
TTPW96K1HN TT 96 1.75" High, half normals
TTPW96K1NS TT 96 1.75" High, normals strapped
TTPW96K3NN TT 96 3.5" High, non-normals
TTPW96K3HN TT 96 3.5" High, half normals
TTPW96K3NS TT 96 3.5" High, normals strapped
The TTPW96K Series was developed with the AES/EBU digital standard in mind.
As a standard, the TTPW96K utilizes 110 Ohm cabling inside.
DIGITAL
AES / EBU
Digital Ready!
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
17
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
TTPW96K Wired Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
18
Features and Benefits
• Allows for custom patchbay
configurations or central
patching points
• PPTs have IDCs on both sides
for easy installation
• Rugged, attractive black
epoxy-finished steel chassis
• Cable trays allow for mounting
and securing terminated cable
Specifications
Panel thickness: .093"
Mounting hole diameter: .187"
Mounting hole spacing (48
IDCs/row): .340" (Horizontal)
x .275" (Vertical)
Mounting hole spacing (52
IDCs/row): .320" (Horizontal)
x .275" (Vertical)
Wire size: #22, 24, 26 AWG
Stranded or Solid
(IDC termination)
Materials
Housing: Thermoplastic (UL 94V-0)
Contacts: High strength copper
alloy
Backpanels: Black Epoxy coated
C.R.S.
Cable Tray: Black Epoxy coated
C.R.S.
MTPBP/TTPBP Backpanel Series
Ordering Information
Sets of
Part Number PPT Terminals Height Description
MTP48K3BPNS 48 3.5" T, R, S
MTP48K3PBNO 48 3.5" T, R, S, TN, RN
MTP52K3BPNO 52 3.5" T, R, S, TN, RN
MTP24K7 24 x 2 7.0" +, -, S
TTP96K3BPNS 96 3.5" T, R, S
TTP96K5BPNS 96 x 2 5.25" T, R, S, TN, RN
The Backpanel Series offers the end user the flexibility of configuring their own
patchbay, or to use as a central patchpoint location. The backpanels utilize the
PPT punchdown and come with a rugged cable tray.
MTP48K3BPNS
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
19
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
MTPBP/TTPBP Backpanel Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
20
Features and Benefits
• Attractive, corrosion-resistant,
nickel-plated jacks
• Steel frame jacks for superior
jack life
• Extra wide labeling strips provide
maximum space and two vertical
strips, one at each side
• Rugged, attractive black anodized
aluminum face will not break
• Two configurations available:
- Normals brought out
- Normaled at jacks
• Gold switching contacts for
long-term reliability
• Jacks paired for easy identification
of left and right channels
• Connectorized by EDAC®
connectors for ease of termination
by customer
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel
silver with welded contacts
Assembly Screws: Zinc-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel: Black anodized
aluminum
Frame & Cover: C.R.S. black
epoxy painted
Designation Strips: Black polycar-
bonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Polyester
EDAC Connector
Housing: Thermoplastic, UL94V-0
Contacts: Gold plated phosphor
bronze
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: -20˚C to +65˚C
TT96 EDAC Series
Ordering Information
Part Number Type of Jack No. of Jacks Description
TT96EDACNO TT 96 Normals Brought Out (120 pin EDAC)
TT96EDACNS TT 96 Normals Strapped (90 pin EDAC)
The TT96EDAC Series offers the convenience of EDAC®connectors on the back of
the panel for easy installation. Available in normals strapped and normals
brought out, both wired to the SAC code of wiring. We also offer custom wiring
configurations. Contact the factory for details.
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance:
10,000 megohms
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage: 140VDC
Current Rating: 100 milliamps
EDAC Mating Plugs
Part Number Description
516-090-000-301 90 Pin male w/ screw
516-090-000-302 90 Pin male w/ nut
516-120-000-101 120 Pin male w/ screw
516-120-000-102 120 Pin male w/ nut
516-290-500 Terminal solder-style
516-290-590 Terminal crimp-style
TT96EDACNS
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
21
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
TT96 EDAC Series
JACK #2 FOR INPUT AND OUTPUT #1 THROUGH #24, AND
JACK #26 FOR INPUT AND OUTPUT #25 THROUGH #48
JACK #1 FOR INPUT AND OUTPUT
#1 THROUGH #24, AND
JACK #25 FOR INPUT AND
OUTPUT #25 THROUGH #48
Standard Audio Configuration Wiring (S.A.C.)
90 Pin Plug Connector
(Normals at jacks)
Standard Audio Configuration Wiring (S.A.C.)
120 Pin Plug Connector
(Normals brought out)
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
22
Features and Benefits
• Kit features 96 TT jacks in one
rack space (1.75" high) or two
rack spaces (3.5" high)
• Jack blocks can be removed from
the front for easy soldering
• Dust tray limits dirt, dust and
contamination of jack terminals
• Wire management straps are
adjustable and reusable
• Attractive, corrosion resistant
nickel-plated jacks
• Steel frame jack for superior
jack life
• Extra wide labeling strips provide
maximum space
• Rugged, attractive black anodized
aluminum face will not break
or rust
• Three jack configurations available
for the exact switching arrangement
you need: full normal, half normal,
and non-normal (open circuit)
• Fanned solder terminals for easier
solder connections
• Gold switching contacts for long-
term reliability in normal-through
connections
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Nickel-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel: Black anodized
aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic
polyester
TTP96K Patchkit Series
Ordering Information
Part Number Type of Jack No. of Jacks Description
TTP96K1FN TT 96 1.75" High, full normals
TTP96K1HN TT 96 1.75" High, half normal
TTP96K1NN TT 96 1.75" High, no normals
TTP96K3FN TT 96 3.5" High, full normals
TTP96K3HN TT 96 3.5" High, half normals
TTP96K3NN TT 96 3.5" High, no normals
The TTP96K Patchkit Series offers the end user a rugged cable tray to support
rear cabling. Heavy duty construction takes weight off the back of the jacks for
increased reliability. Available in 1.75" or 3.5" height versions.
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0˚C to +50˚C
TTP96K1FN
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance:
10,000 megohms maximum
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage: 140VDC maximum
Current Rating: 100 milliamps
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
23
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
TTP96K Patchkit Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
24
Features and Benefits
• Kit features 48 1/4" longframe
jacks in one rack space (1" high)
or in two rack spaces (3" high) or
52 1/4" longframe jacks in one
rack space (1" high)
• Allows user to add cable and
termination panel
• Removable jack panel from the
front allows easy soldering of
wire connections
• Jacks have gold switching
contacts
• Fanned solder terminals for easier
soldering
• Offset ground lugs allow easy
bussing of ground with one wire
• Jacks have a nickel-plated frame
and assembly screws
• Wire management straps are
reusable and adjustable
Specifications
Materials
Jacks
Frame: Stamped nickel-plated
steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Nickel-plated
steel
Welded Contacts: Gold alloy
Panel
Front Panel: Thermoplastic
Frame: C.R.S. black epoxy paint
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
MT48K/MT52K Patchkit Series
Ordering Information
Part Number Type of Jack No. of Jacks Height Description
MT48K1NS MT 48 1.75" Normals strapped
MT48K1FN MT 48 1.75" Full normals
MT48K1HN MT 48 1.75" Half normals
MT48K1NN MT 48 1.75" No normals
MT52K1NS MT 52 1.75" Normals strapped
MT52K1FN MT 52 1.75" Full normals
MT52K1HN MT 52 1.75" Half normals
MT52K1NN MT 52 1.75" No normals
MT48K3FN MT 48 3.5" Full normals
MT48K3HN MT 48 3.5" Half normals
MT48K3NN MT 48 3.5" No normals
MT52K3FN MT 52 3.5" Full normals
MT52K3HN MT 52 3.5" Half normals
MT52K3NN MT 52 3.5" No normals
The MT48/52K Patchkit Series offers the end user a rugged cable tray to support
rear cabling. Heavy duty construction takes weight off the back of the jacks for
increased reliability. Available in 1.75" or 3.5" height versions.
MT52K1FN
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage: 140VDC
maximum
Current Rating: 100 milliamps
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
25
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
MT48K/MT52K Patchkit Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
26
Features and Benefits
• Units feature either 48 or 52
MT Jax®
• Steel frame jacks for superior
jack life
• Attractive, corrosion resistant
nickel-plated jacks
• Gold switching contacts for
long-term reliability in normal-
through connections
• Offset ground terminal for ease
in making common ground buss
connections
• Fanned solder terminals for
easier solder connections
• Cable tie bar takes the weight
of cables off the jacks
• Four jack configurations
available for the exact switching
arrangement: full normal, half
normal, non-normal, and
normals strapped
Specifications
Materials
Jacks
Frame: Steel, nickel-plated
Bushing: Brass, nickel-plated
Springs: Nickel silver, solder lugs
Ground Terminal: Nickel silver,
solder lugs
Switching Contacts: Welded,
gold alloy
Insulation: Phenolic spacers, rigid
PVC tubing through stack
Screws: Steel, nickel-plated
Panel
Jack Panel: Thermoplastic
Cable Support Bracket: 5/16"
diameter black epoxy painted
steel rod
Screws (designation strip): Steel,
black zinc-plated
Screws (mounting jack): Steel,
nickel plated
Kwik-change®Designation Strip:
Extruded aluminum, black anodized
Marking Strip:
White plastic, matte finish
Marking Strip Cover:
Clear, extruded plastic
MT48/MT52 Patchbay Series
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage: 140VDC
maximum
Current Rating: 100 milliamps
Ordering Information
Part Number Type of Jack No. of Jacks Description
MT48FN MT 48 Full normals
MT48HN MT 48 Half normals
MT48NN MT 48 No normals
MT48NS MT 48 Normals strapped
MT52FN MT 52 Full normals
MT52HN MT 52 Half normals
MT52NN MT 52 No normals
MT52NS MT 52 Normals strapped
The MT48/52 Series patchbays offer a rugged cable tie bar to support rear
cabling. Also available is the normals strapped configuration which has the shunts
or normals tied together, top to bottom jacks.
MT48FN
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
27
MT48/MT52 Patchbay Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
28
Features and Benefits
• Unit features 96 TT jacks
• Attractive, corrosion resistant
nickel-plated jacks
• Steel frame jack for superior
jack life
• Extra wide labeling strips provide
maximum space
• Rugged cable tie bar takes the
weight of cables off the jacks
• Rugged, attractive black anodized
aluminum face will not break
• Three jack configurations available
for the exact switching arrangement
you need: full normal, half normal,
and open circuit panel
• Fanned solder terminals for easier
solder connections
• Offset ground terminal for ease in
making common ground buss
connections
• Gold switching contacts for
long-term reliability in normal-
through connections
Specifications
Materials
Jacks
Frame: Steel, nickel-plated
Bushing: Nickel-plated copper alloy
Springs: Copper alloy solder lugs
Ground Terminal: Steel, tin
electrodeposited
Switching Contacts: Welded, gold
alloy inlay over palladium base
Insulation: Rigid plastic spacers,
rigid PVC tubing through stack
Screws: Steel, plated
Panel
Frame: Black anodized aluminum
Inserts: Polyester, glass filled,
94V-0
Cable Support Bar: Cold rolled
steel, nickel-plated
Designation Strips: Thermoplastic,
94V-0
TTP96AS Patchbay Series
Designation Strip Covers: Clear
thermoplastic, SE-1
Marking Strip: Rigid vinylite
Jack Mounting Screws: Steel, plated
Screws: Steel, black plated
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0˚C to +50˚C
Ordering Information
Part Number Type of Jack No. of Jacks Description
TTP96ASFN TT 96 Full normals
TTP96ASHN TT 96 Half normals
TTP96ASNN TT 96 No normals
The TTP96AS Series of patchbays offer a rugged cable tie bar to support
rear cabling.
TTP96ASFN
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage:
140VDC maximum
Current Rating: 100 milliamps
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
29
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
TTP96AS Patchbay Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
30
Features and Benefits
• Available in 1RU or 2RU versions
• Available with or without connectors
• HPC Series connectors are
compatible with Neutrik Speakon®
connectors
• Cable tie bar takes weight of the
cables off the terminations
• Rugged aluminum channel
• Silk-screen designation area makes
it easy to re-label channels
Panel Materials
Housing: Thermoplastic UL
94V-0 rated
Contacts: Silver-plated over
copper alloy
Frame: Aluminum, black anodized
Cable Tie Bar: Steel, black epoxy
HP Connector Specifications
Mechanical
Shock: Per Mil-Std 202,
Method 213B, Cond. K
Vibration: Mil-Std 202,
Method 201A
Life: 1,000 rotational cycles
Cable Range (cord mount): 10AWG,
0.560" cable OD maximum
Electrical
Voltage Rating: 1,500 AC RMS,
per Mil-Std 202, Method 301
Current Rating (Faston® terminals):
50A RMS w/10AWG wire,
normal ambient, per UL 1977
Current Rating (PC terminals):
30A per UL 1977
Contact Resistance: 1m1, 1.5m1
after 1,000 insertion/withdrawals
Insulation Resistance: .2T1
Environmental
Salt Spray: Mil-Std 202, Method
101D, Cond.B
Thermal Shock: Mil-Std 202,
Method 107G
Temperature Limits: -55˚C to +85˚C
Moisture Resistance: Mil-Std 202,
Method 106E
Life @ Ambient Temperature:
Mil-Std 202, Method 108A
Touchproof: IEC 65 and 1010-1
IP Rating: IEC 529, IP 25
HPC Patchbay Series
HPCPK324F
Ordering Information
Part Number Height Description
HPCPK112F 1.75" 12 connectors, 0.250" Fastons
HPCPK112F1 1.75" 12 connectors, 0.187" Fastons
HPCPK1B 1.75" Blank panel
HPCPK324F 3.50" 24 connectors, 0.250" Fastons
HPCPK324F1 3.50" 24 connectors, 0.187" Fastons
HPCPK3B 3.50" Blank panel
The HPC Patchbay features a 19" rack unit loaded with HPC Series connectors.
Available with either 0.250" Faston®terminals or 0.187" Faston®terminals. One
rack unit height versions come with 12 HPC connectors, two rack unit height
versions come with 24 HPC connectors. All versions have a rugged cable tie bar,
which takes the weight of the cabling away from the connections.
Materials
Housings: Thermoplastic
UL 94V-0 rated
Seal Rings: Thermoplastic rubber
Contacts: Silver-plated over
copper alloy
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
31
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
HPC Patchbay Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
32 Q-G®Patchbay Series
Features and Benefits
• Available in 1RU or 2RU versions
• Available with or without the
connectors
• E Series connectors are silver-plated,
3 pins/contacts with black finish
• Cable tie bar takes the weight
of the cables off the solder
terminations
• Rugged aluminum channel
increases durability
• Silk-screen designation area
makes it easy to re-label channels
Specifications
Materials
Connectors
Housing: Die-cast, black velvet finish
Inserts: Glass-filled thermoplastic
Pin/Contacts: Copper alloy,
silver-plated
Latch Release: Steel, nickel-plated
Insert Locking Cam: Die-cast zinc
Frame
Aluminum, black anodized
Cable Tie Bar
Steel, black epoxy
Ordering Information
Part Number Height Description
QGPK116FB 1.75" 16 female
QGPK116MB 1.75" 16 male
QGPK18M8FB 1.75" 8 male, 8 female
QGPK332MFB 3.5" 16 female( top), 16 male (bottom)
QGPK1B 1.75" Blank panel
QGPK3B 3.5" Blank panel
QGPK332MFB
The QG®Patchbay features a 19" rack unit loaded with E Series QG®connectors.
These XLR’s have the same panel cut-out, male or female, silver-plated pins or
contacts, and a black finish. All connectors have solder cup terminals for easy
soldering and the inserts are removable from the back, allowing for easy changes.
The one rack unit height version comes with 16 male, or 16 female, or 8 male
and 8 female connectors. The two rack unit version comes with 16 male and 16
female connectors. We also offer the unit without connectors, but with the panel
cut-outs already punched out.
All versions have a rugged cable tie bar, which takes the weight of the
cabling away from the solder connections.
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
33
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Q-G®Patchbay Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
34 VPP Video Patchbay Series
Features and Benefits
• HD Series rated from DC to
3.0 GHz
• SD Series has a bandwidth from
DC to 1.75GHz
• Black thermoplastic modules
insulate jacks from chassis
• Jacks feature rugged heavy duty
housings
Video Jack Specifications
Electrical
Rated Bandwidth: 3.0 GHz (HD),
1.75 GHz (SD)
Characteristic Impedance:
75 ohms
Return Loss: Better than –15 dB
Insertion Loss: Better than –.5 dB
Contact Resistance: Less than 20
milliohms
Termination Resistance:
75 W, ±1%
Center Conductor: Accepts .090
pin diameter
Mechanical
Mechanical Shock: Per MIL-STD-
202, Method 213, Test condition I
Vibration: Per MIL-STD-202,
Method 201
Life Cycle: 30,000
Materials
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy,
gold plated
Switching Springs: Copper alloy,
gold plated
Grounding Contacts:
HD Series - Copper alloy, gold
plated
SD Series - Copper alloy, nickel
plated
Insulators: Thermoplastic,
UL 94V-0 rated
Environmental
Operating Temperature:
– 40°C to 65°C
Storage Temperature:
– 55°C to 85°C
Thermal Shock:
Per MIL-STD-202, Method 107
Moisture and Humidity:
Per MIL-STD-202, Method 106
Ordering Information
Part Number Type of Jack No. of Jacks Height Description
VPP24K1HD*75T HD 24 1.75" Terminated
VPP24K1HD*NT HD 24 1.75" Non-term
VPP24K1SD*75T SD 24 1.75" Terminated
VPP24K1SD*NT SD 24 1.75" Non-term
VPP26K1HD*75T HD 26 1.75" Terminated
VPP26K1HD*NT HD 26 1.75" Non-term
VPP26K1SD*75T SD 26 1.75" Terminated
VPP26K1SD*NT SD 26 1.75" Non-term
VPP24K3HD*75T HD 24 3.5" Terminated
VPP24K3HD*NT HD 24 3.5" Non-term
VPP24K3SD*75T SD 24 3.5" Terminated
VPP24K3SD*NT SD 24 3.5" Non-term
VPP26K3HD*75T HD 26 3.5" Terminated
VPP26K3HD*NT HD 26 3.5" Non-term
VPP26K3SD*75T SD 26 3.5" Terminated
VPP26K3SD*NT SD 26 3.5" Non-term
* Add “N” for non-normalled version
The VPP Series video patchbays offer a wide variety of options for video patching.
The HD Series meets SMPTE 292M specifications for high definition video signaling,
covering a bandwidth range from DC to 3.0GHz. The SD Series is perfect for serial
digital, with a bandwidth from DC to 1.75GHz. Both come in either terminated or
non-terminated, 24 or 26 jacks, 1.75" or 3.5" heights.
See Page 36 for Individual Jacks Ordering Information
VPP24K3HD75T
VJHD*75TX
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
35
VPP Video Patchbay Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
36 VPP Video Patchbay Series
SMITH CHART (TYPICAL)
START 30 kHz STOP 3.0 GHZ
75 Ohms
Ordering - Individual Jacks
Part Number Type Description
VJHD*75TX HD Terminated
VJHD*NTX HD Non-terminated
VJSD*75TX SD Terminated
VJSD*NTX SD Non-terminated
* Add “N” for non-normalled version
INSERTION LOSS (TYPICAL)
0
-1
-2
-3
-4
-5
G
O
O
D
0 600 1200 1800 2400 3000
FREQUENCY
(
MHz
)
I
N
S
E
R
T
I
O
N
L
O
S
S
(dB)
RETURN LOSS (TYPICAL)
G
O
O
D
0
-5
-10
-15
-20
-25
-30
-35
R
E
T
U
R
N
L
O
S
S
(dB)
0 600 1200 1800 2400 3000
FREQUENCY (MHz)
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
37
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Features and Benefits
• Midsize video jacks rated from
DC to 3 GHz
• 32 midsize jacks mounted either
1RU, 1.5RU or 2RU panel
• Available in terminated or
non-terminated configurations
Specifications
Materials
Frame: Aluminum, black anodized
Designation Strips: Vinylite, white
Designation Strip Covers: Lexan,
transparent
Jack Inserts: Thermoplastic,
UL 94V-0 rated
Midsize Video Jack
Specifications
Electrical
Rated Bandwidth: 3.0 GHz
Characteristic Impedance:
75 ohms
Return Loss: See Typical Return
Loss Chart
Insertion Loss: See Typical
Insertion Loss Chart
Contact Resistance:
Less than 20 milliohms
Termination Resistance:
75 W, ±1%
Center Conductor: Accepts .048
pin diameter
Mechanical
Mechanical Shock: Per MIL-STD-
202, Method 213, Test condition I
Vibration: Per MIL-STD-202,
Method 201
Life Cycle: 30,000
Materials
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy,
gold plated
Ordering Information
Part Number Type of Jack Height Description
MVP32K1*75T Midsize 1.75" Terminated
MVP32K1*NT Midsize 1.75" Non-terminated
MVP32K2*75T Midsize 2.62" Terminated
MVP32K2*NT Midsize 2.62" Non-terminated
MVP32K3*75T Midsize 3.5" Terminated
MVP32K3*NT Midsize 3.5" Non-terminated
* Add “N” for non-normalled version
MVP Midsize Video Patchbay Series
MVJ*75T
MVP32K3*75T
Switching Springs: Copper alloy,
gold plated
Grounding Contacts: Copper
alloy, gold plated
BNC Insulators: Teflon
Actuators: Thermoplastic,
UL94V-0 rated
Environmental
Operating Temperature:
– 40°C to 65°C
Storage Temperature:
– 55°C to 85°C
Thermal Shock:
Per MIL-STD-202, Method 107
Moisture and Humidity:
Per MIL-STD-202, Method 106
See Page 39 for Individual Midsize Jacks Ordering Information
The MVP Series video patchbays offer outstanding performance and high density.
Patchbays consist of 32 jacks in either 1RU or 2RU heights, jacks come either
terminated or non-terminated. These jacks are rated from DC to 3 GHz, and are
rated at 30,000 lifecycles. The 1.5RU and 2RU come with cable tie bars.
* Please visit the product pages on our website for the most up-to-date product information
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
PATCHBAYS
38 MVP Midsize Video Patchbay Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
39
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
MVP Midsize Video Patchbay Series
INSERTION LOSS (TYPICAL)
0
-1
-2
-3
-4
-5
G
O
O
D
0 600 1200 1800 2400 3000
FREQUENCY
(
MHz
)
I
N
S
E
R
T
I
O
N
L
O
S
S
(dB)
RETURN LOSS (TYPICAL)
G
O
O
D
0
-5
-10
-15
-20
-25
-30
-35
R
E
T
U
R
N
L
O
S
S
(dB)
0 600 1200 1800 2400 3000
FREQUENCY (MHz)
SMITH CHART (TYPICAL)
START 30 kHz STOP 3.0 GHZ
75 Ohms
Ordering - Individual Midsize Jacks
Part Number Type Description
MVJ*75T HD Terminated
MVJ*NT HD Non-terminated
* Add “N” for non-normalled version
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
40 VAP Video/Audio Patchbay Series
Features and Benefits
• Combines 13 video jacks and
26 long-frame audio jacks into
one patchbay
• Available with either HD Series
or SD Series video jacks
• All audio jacks are nickel-plated
with steel frames and gold-plated
switching contacts
• Audio modules consist of 4
YMT334BN jacks, video modules
consist of 2 dual video jacks
Video Jack Specifications
Electrical
Rated Bandwidth: 2.4 GHz (HD),
1.75 GHz (SD)
Characteristic Impedance: 75 ohms
Return Loss: Better than –15 dB
Insertion Loss: Better than –.5 dB
Contact Resistance: Less than 20
milliohms
Termination Resistance: 75 W, ±1%
Center Conductor: Accepts .090
pin diameter
Mechanical
Mechanical Shock: Per MIL-STD-
202, Method 213, Test condition I
Vibration: Per MIL-STD-202,
Method 201
Life Cycle: 30,000
Materials
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy,
gold plated
Switching Springs: Copper alloy,
gold plated
Grounding Contacts:
HD Series - Copper alloy,
gold plated
SD Series - Copper alloy,
nickel plated
Insulators: Thermoplastic,
UL 94V-0 rated
Environmental
Operating Temperature: – 40°C to
65°C
Storage Temperature: – 55°C to
85°C
Thermal Shock: Per MIL-STD-202,
Method 107
Moisture and Humidity: Per
MIL-STD-202, Method 106
Ordering Information
Part Number Type of Jack Height Description
VAPK1HD*75T HD 1.75" Terminated
VAPK1HD*NT HD 1.75" Non-terminated
VAPK1SD*75T SD 1.75" Terminated
VAPK1SD*NT SD 1.75" Non-terminated
VAPK3HD*75T HD 3.5" Terminated
VAPK3HD*NT HD 3.5" Non-terminated
VAPK3SD*75T SD 3.5" Terminated
VAPK3SD*NT SD 3.5" Non-terminated
Modules
VMAFN MT Style 4- YMT334BN jacks
VMVHD*75T HD 2- HD terminated jacks
VMVHD*NT HD 2- HD non-terminated jacks
VMVSD*75T SD 2- SD terminated jacks
VMVSD*NT SD 2-SD non-terminated jacks
* Add “N” for non-normalled version
The VAP Series combines audio and video in one convenient patchbay. Standard
versions consist of 13 video jacks and 26 long-frame audio jacks into one unit.
Options include HD Series video jacks which are rated from DC to 2.4GHz or SD
Series rated from DC to 1.5GHz. Both come in either terminated or non-terminated
jacks. The MT Style audio jacks all have nickel-plated steel frames and gold-plated
switching contacts. Flared terminals make soldering easier. All audio jacks are
T,R,S, TN, and RN. Individual modules are useful for custom configurations.
VJHD*75TX
VAPK3HD*75T
See Page 36 For Video Jack
Ordering Information and
Page 69 For Audio Jack
Ordering Information
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
41
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
VAP Video/Audio Patchbay Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
42
Features and Benefits
• Combines 16 midsize video jacks
and 24 dual EZ Norm bantam jacks.
• Video jacks are rated from DC
to 3.0 GHZ.
• Rugged, attractive anodized aluminum
frame for increased reliability.
• All audio jacks utilize EZ Norm
technology for easy normal
reconfiguration. A simple twist
of the normal cam changes the
normal function from full, to half,
to no normals.
• Cable tie bar removes weight off
the rear terminations.
• Large designation strips for easy
patch point identification.
Video Jack Specifications
See page 39 for details
Audio Jack Specifications
See page 10 for details
Part Number: MVEZNPK175T
MVEZNPK175T
MVEZN Audio/Midsize Patchbay Series
The MVEZN Series combines our popular MVJ midsize video jacks with our latest
bantam jack, the EZ Norm. This patchbay has 16 video jacks and 24 dual EZ Norm
bantam jacks. Perfect for application where a full video and audio patchbay are
unnecessary. The video jacks are rated up to 3.0GHz, and the audio jacks meet
30,000 cycles, both in insertion/withdrawals and with the normal cam.
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
43
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Features and Benefits
• Combines 16 midsize video jacks
and 48 TT bantam audio jacks.
• Video jacks are rated from DC to
3.0 GHZ.
• All audio jacks are nickel-plated with
steel frames and gold-plated cross-
bar switching contacts.
• Rugged, attractive anodized aluminum
frame for increased reliability.
• Large designation strips for easy
patch point identification.
• Audio jacks rated at 30,000 cycles.
Video Jack Specifications
See page 39 for details
Audio Jack Specifications
See page 69 for details
Materials
Frame: Aluminum, black anodized
MBPK175T
The MBPK Series combines our popular MVJ midsize video jacks with our
standard nickel-plated, steel frame audio jacks. This patchbay combines 16
midsize video jacks with 48 TT bantam audio jacks. Perfect for applications
where a full video and audio patchbay are unnecessary. The video jacks are rated
up to 3.0GHz, and the audio jacks meet 30,000 cycles. The audio jacks have T,
R, S, TN, and RN terminals, and feature gold-plated contacts and flared solder
terminals.
MBPK Video/Audio Patchbay Series
* Please visit the product pages on our website for the most up-to-date product information
44 Audio and Video Patchcords
PATCHCORDS/MOLDED CABLES
Features and Benefits - Audio
• 110 ohm impedance-matched
digital patchcords meet AES/EBU
interface standards for digital
patching
• Available with a variety of plug
terminations, plug finishes, cord
lengths and cable colors, the
patchcords offer design flexibility
• Premium quality cable insures high
reliability and greater flexibility
Specifications
Standard plug terminations are
single 3-conductor 1/4" and TT®
Nickel-plated plugs (standard),
brass and gold-plated (optional)
Cable jacket material is PVC.
Black is standard with other
colors available
Features and Benefits - Video
• Designed and built to highest
quality standards for efficient
video signal transmission
• Cable type is RG59 (75W)
• Rugged nickel-plated handles
with knurled area for positive
finger grip
• Available in standard size or
midsize styles
Specifications
Materials
Housing: Nickel-plated,
copper alloy
Contact Pin: Gold-plated,
copper alloy
Boot: Thermoplastic, in black
and colors
A wide variety of audio patchcords
and molded cable assemblies are
available. Some of the more popular
versions are the 18Q and 20Q Series
for professional 1/4" patching, the
TT* and TTD Series for TT or bantam
AES/EBU digital patching. The VP
and VMP Series offer exceptional
performance for video signal patching.
MD6
MD3
VP1BK
20Q
18Q
TT740
TT120
TT1BK
Ordering Information
Video Patchcords
Part Number Type Part Number Type
VP3** Standard
VP4** Standard
VP5** Standard
VP6** Standard
VP7** Standard
VP8** Standard
VP9** Standard
VP10** Standard
VSPP Standard
VMP1** Midsize
VMP2** Midsize
VMP3** Midsize
VMP4** Midsize
VMP5** Midsize
VMP6** Midsize
VMP7** Midsize
VMP8** Midsize
VMP9** Midsize
VMP10** Midsize
VMPP Midsize
When ordering, add the following for cable color: BK-Black, BL-Blue, R-Red, O-Orange,
Y-Yellow, GN-Green, P-Purple, GY-Gray
* Please visit the product pages on our website for the most up-to-date product information
45
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Ordering Information
Part Number Type Plug Finger Description
Audio Patchcords
18QD18 1/4" Mil-Type Brass 2 foot, black nylon jacket
18QF18 1/4" Mil-Type Brass 3 foot, black nylon jacket
18QH18 1/4" Mil-Type Brass 4 foot, black nylon jacket
20QD20N* 1/4" Mil-Type Nickel 2 foot, nylon jacket
20QF20N* 1/4" Mil-Type Nickel 3 foot, nylon jacket
20QH20N* 1/4" Mil-Type Nickel 4 foot, nylon jacket
When ordering, add the following for cable color: 0-Black, 2-Red,
5-Green, 6-Blue
TT122 TT or Bantam Brass 1 foot, molded gray jacket
TT124 TT or Bantam Brass 2 foot, molded gray jacket
TT126 TT or Bantam Brass 3 foot, molded gray jacket
TT127 TT or Bantam Brass 4 foot, molded gray jacket
TT128 TT or Bantam Brass 5 foot, molded gray jacket
AES/EBU 110 Ohm Digital Single Plug Patchcords
TT1* TT or Bantam Nickel 1 foot, molded
TT2* TT or Bantam Nickel 2 foot, molded
TT3* TT or Bantam Nickel 3 foot, molded
TT4* TT or Bantam Nickel 4 foot, molded
TT5* TT or Bantam Nickel 5 foot, molded
TT6* TT or Bantam Nickel 6 foot, molded
TT7* TT or Bantam Nickel 7 foot, molded
TT8* TT or Bantam Nickel 8 foot, molded
TT9* TT or Bantam Nickel 9 foot, molded
TT10* TT or Bantam Nickel 10 foot, molded
AES/EBU 110 Ohm Digital, or RS422 Dual Plug Patchcords
TTD1* TT or Bantam Nickel 1 foot, molded
TTD2* TT or Bantam Nickel 2 foot, molded
TTD3* TT or Bantam Nickel 3 foot, molded
TTD4* TT or Bantam Nickel 4 foot, molded
TTD5* TT or Bantam Nickel 5 foot, molded
TTD6* TT or Bantam Nickel 6 foot, molded
TTD7* TT or Bantam Nickel 7 foot, molded
TTD8* TT or Bantam Nickel 8 foot, molded
TTD9* TT or Bantam Nickel 8 foot, molded
TTD10* TT or Bantam Nickel 10 foot, molded
When ordering, add the following for cable color: BK-Black, BL-Blue, R-Red,
O-Orange, Y-Yellow, GN-Green, P-Purple, GY-Gray
Audio and Video Patchcords
PATCHCORDS/MOLDED CABLES
Ordering Information
Part No. Description
Molded MIDI Cables
MD3 3 foot, 5 pin DIN, molded black
MD6 6 foot, 5 pin DIN, molded black
MD10 10 foot, 5 pin DIN, molded black
MD15 15 foot, 5 pin DIN, molded black
Uses 4 cond., 24 awg, PVC outer jacket,
braided shielded cable
1/4" Cables
05AD05 2 foot, mono, male to male
05AK05 6 foot, mono, male to male
05AN05 10 foot, mono, male to male
05AU05 25 foot, mono, male to male
05AN15 10 foot, mono, male to RA male
05AN80 10 foot, mono, male to female
05AU80 25 foot, mono, male to female
10BF10 3 foot, stereo, male to male
10BK10 6 foot, stereo, male to male
10BN10 10 foot, stereo, male to male
15AK15 6 foot, mono, RA male to RA male
RCA
25AF25 3 foot, male to male
25AK25 6 foot, male to male
25AN25 10 foot, male to male
25AK82 6 foot, male to female
30AK30 6 foot, RA male to RA male
30AN30 10 foot, RA male to RA male
30AR30 15 foot, RA male to RA male
1/4" to RCA
05AK25 6 foot, 1/4" male to RCA male
05AN25 10 foot, 1/4" male to RCA male
Uses either single or 2 cond, 22awg,
PVC outer jacket, braided shielded cable
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
46
CONNECTORS
Ordering Information
Pins/
Part Number Style Finish Contacts Notes
A*F, A*M Cord Nickel Silver Standard Cable Clamp
A*FB, A*MB Cord Black Silver Standard Cable Clamp
A*FBAU, A*MBAU Cord Black Gold Standard Cable Clamp
A*FL, A*ML Cord Nickel Silver Standard cable clamp,
large flex relief
AA*F, AA*M Cord Nickel Silver One piece cable clamp
AA*FB, AA*MB Cord Black Silver One piece cable clamp
AA*FBAU, AA*MBAU Cord Black Gold One piece cable clamp
AA*FL, AA*ML Cord Nickel Silver One piece cable clamp,
large flex relief
AAA*FZ, AAA*MZ Cord Nickel Silver Twist-on metal handle
AAA*FBZ, AAA*MBZ Cord Black Silver Twist-on metal handle
AAA*FBAUZ,
AAA*MBAUZ Cord Black Gold Twist-on metal handle
AAA*FPZ, AAA*MPZ Cord Nickel Silver Twist-on plastic handle
AAA*FPBZ, AAA*MPBZ Cord Black Silver Twist-on plastic handle
AAA*FPBAUZ,
AAA*MPBAUZ
Cord Black Gold Twist-on plastic handle
* Available 3 - 7 pins or contacts
Q-G®Audio Connector Series
A, AA, AAA Cord Style Series
Switchcraft offers a wide range of
cord style XLR connectors.
The A Series features a dual
pressure plate strain relief mechanism
to securely fasten the connector to
the cable. The A Series is also available
with FAS-DISCONNECT detent.
The AA Series features a 1-piece
strain relief mechanism that clamps
onto the outer jacket of the cable.
The AAA Series features a twist-on
handle with a built-in strain relief
mechanism and a pre-loaded insert.
The new R Series offers the same
strain relief system as the AAA Series.
Specifications
Electrical
Contact Resistance: 50 milliohm
maximum, per pole
Current Rating @ 125VAC:
3 pole - 15A, 4 pole -10A,
5 & 6 pole - 7.5A, 7 pole - 5A
Insulation Resistance: 1,000 MW,
minimum
Dielectric Withstanding Voltage:
1,000 V (rms)
Capacitance: )3pF between pins
and )6 pF between pins and
shell, maximum
Mechanical
Insertion/Withdrawal Forces:
10 lbs. maximum, 8 lbs. nominal/
7 lbs. maximum, 5 lbs. nominal
Materials
Shell: Die-Cast zinc with nickel
finish or black chrome
Handle: Die cast with nickel finish
or black chrome. Also black
thermoplastic handle available
O Ring: TPR (Thermoplastic rubber).
Insert Insulation: Molded
thermoplastic
Socket Contacts: Silver plated
copper alloy tarnish resistant;
bifurcated on 3 and 4 contact
types. Gold is available.
Pin Contacts: Silver plated
copper alloy.
Resists tarnishing, and provides
excellent electrical conductivity.
Gold is available.
Latch lock: High strength die cast zinc
Multi-finger cable clamp and rubber
gasket: TPR (Thermoplastic
plastic & rubber)
Flex Relief: TPR (Thermoplastic rubber)
See Page 56 for
Mechanical Drawings
A*M
AAA*MPZ
AA*FB
AAA*FPBAUZ
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
47
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Q-G®Audio Connector Series
B, C, D, E Panel Style Series
Ordering Information
Pins/
Part Number Style Finish Contacts Notes
B*F, B*M Panel Nickel Silver Threaded Collar
B*FB, B*MB Panel Black Silver Threaded Collar
C*F, C*M Panel Nickel Silver Uses #5-40 mounting screws
C*FB, C*MB Panel Black Silver Uses #5-40 mounting screws
D*F, D*M Panel Nickel Silver Uses #5-40 mounting screws
D*FB, D*MB Panel Black Silver Rectangle housing
D*FBAU, D*MBAU Panel Black Gold Rectangle housing
D*FS, D*MS Panel Nickel Silver Rectangle housing, smooth finish
E3FSC, E3MSC Panel Nickel Silver Male/Female same panel cut-out
E3FSCB, E3MSCB Panel Black Silver Male/Female same panel cut-out
E3FSCBAU,
E3MSCBAU Panel Black Gold Male/Female same panel cut-out
* Available 3 - 7 pins or contacts
Switchcraft also offers a wide range
of panel mount connectors.
The B Series features a round
housing with a threaded collar for
mounting. The female version requires
a spanner wrench to tighten the
connector to the chassis. Both
male and female are available with
black finish.
The C Series is another round
housing panel mount, which has
0.140" mounting holes requiring
#5-40 screws to mount.
The D Series, our most popular
version, is a rectangle housing
panel mount. The standard Rawall
finish resists scratching, while the
optional satin finish offers a smooth
finish for mounting on a brushed
finished chassis.
The E Series offers a panel
mount with quick release inserts. A
small screwdriver is used to remove
the inserts, allowing for easy gender
changes. The male and female E
Series fit into the same panel cut-outs.
The E Series is also available
with PC terminals. Contact the
factory for details.
See Page 57 for Mechanical Drawings
D*MS
D*F
D*MBAU
C*MB
B*MB
B*F C*F
E3FSC
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
48 Q-G®Audio Connector Series
J, K, P, R, T Wallplate, Gooseneck, Panel & Cord Style Series
Ordering Information
Pins/
Part Number Style Finish Contacts Notes
J3FS Wallplate Nickel Silver Single D3F
K3FS Wallplate Nickel Silver Dual D3F’s
P*F, P*M Gooseneck Nickel Silver Female ext. threads,
male int.threads
P*FB, P*MB Gooseneck Black Silver Female ext. threads,
male int.threads
PD3FSC1, PD3MSC1 Panel Black Silver Plastic Housing
PD3FSC1AU, PD3MSC1AU Panel Black Gold Plastic Housing
R*FZ, R*MZ Cord Nickel Silver Right Angle
R*FBZ, R*MBZ Cord Black Silver Right Angle
R*FBAUZ, R*MBAUZ Cord Black Gold Right Angle
T3F Cord Nickel Silver On-off switch
* Available 3 - 7 pins or contacts
The J and K Series are wallplates
using the D Series receptacles
pre-mounted. Available in single or
dual connector versions.
The PD Series is a plastic panel
mount series, using 94V-0 rated
material. Both male and female
mount into the same panel cut-out
and are available in solder cup,
straight PC, and right angle PC
terminals.
Switchcraft also offers gooseneck
connectors and cord plugs with
on-off switches. The P Series are
gooseneck connectors available in
male or female, with optional black
finishes. The male has external
5/8-27 threads, the female has internal
5/8-27 threads.
The new R Series incorporates
the same strain relief system as the
AAA Series. The insert can be offset
at 45˚ to accommodate a wide variety
of applications.
The T Series is similar to the
A Series female cord plug, but
offers a DPDT (2-C) locking on-off
switch. The slide switch is rated at
500mA, 125V.
See Pages 58 and 59 for Mechanical Drawings
K3FS
J3FS
PD3FSC1
P*M
R*M
P*F
T3F
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
49
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Tini-Q-G®Connector Series
Tini-Q-G®Cord & Panel Style Series
Ordering Information
Pins/
Part Number Style Finish Contacts Notes
TA*F, TA*M Cord Nickel Silver Available in 3 - 6 pins or contacts
TA*FL, TA*ML Cord Nickel Silver Accommodates large cable,
available in 3 - 8 pins or contacts
TA*FB, TA*MB Cord Black Silver Available in 3 - 6 pins or contacts
TB*M Panel Nickel Silver Male, round flange, threaded,
available in 3 - 8 pins or contacts
TB*MB Panel Black Silver Male, round flange, threaded,
available in 3 - 8 pins or contacts
TY*F Panel Nickel Silver Female, rectangle flange,
available in 3 - 5 pins or contacts
The Tini-QG Series is a miniature
version of the standard QG Series.
These “mini-XLR’s” come in a wide
variety of configurations. The standard
TA Series cord plugs are available in
3-6 pins or contacts. The L versions,
with their larger strain reliefs, are
available in 3-8 pins or contacts.The
TB and TY Series are panel mount
connectors. The TB Series is a male
connector, featuring a round panel
cut-out and 3-8 pins. The TY Series
is a female connector, featuring a
rectangular housing and 3-5 contacts.
The TA and TB Series are available with
a black finish. Gold-plated contacts
are available on all series. Contact
the factory for details.
Specifications
Electrical
Contact Resistance: .010 ohms
maximum after life (and after
salt spray)
Current Rating (Carry Only): 5A,
125 VAC (4A, 125 VAC on 5
circuit) based on 30˚C maximum
Insulation Resistance: 510,000
megohms minimum @ 500
VDC (initial); 10,000 megohms
minimum (after humidity test)
Dielectric Strength: 1,000V (rms)
Mechanical
Life: 5,000 operations minimum
Solderability Standard: Meets EIA
RS-186-9E
Mechanical Shock: Meets
Mil-Std-202, method 213B
Vibration: Meets Mil-Std-202,
method 201A
Wire Size: #22 wire gauge solid;
#24 wire gauge stranded
Environmental
Thermal Range: -55˚C to +85˚C
Humidity: Meets Mil-Std-202,
method 106D
Thermal Shock: Meets
Mil-Std-202, method 107D
Salt Spray: Meets Mil-Std-202,
method 101
Materials
Housing: Plugs and Male Receptacles
— Copper alloy, nickel-plated;
Female Receptacles — Die-cast
zinc, nickel-plated
Black Tini-Q-G® Housing: Copper
alloy, black chrome-plated
Pin and Socket Contacts: Copper
alloy, silver-plated
Flex Relief: Molded black
thermoplastic elastomer
Latch Button: Molded black
thermoplastic
TA*MB
TA*F
TA*FL
TB*M
TY*F
Release Lever and Mounting
Washer: Steel, nickel-plated
Standoff/Ground Terminal and
Cable Clamp: Steel, electrotinned
Inserts and Insulating Spacer:
Molded, high strength thermoplastic
Latch (Female): Copper alloy,
nickel-plated
Mounting Nut: Copper alloy,
nickel-plated
See Page 59 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
50 HPC Connector Series
HPC Panel Style Series
The HPC Series is a complete line
of high power loudspeaker connectors
that are completely compatible
with the Neutrik®Speakon®4 pole
connector series. Included in the
series are round and rectangular
panel mounts, straight cord plugs,
right angle cord plugs, and in-line
cord plug, plus a barrel adapter.
The HPC panel mounts come
with two different flange depths,
either 0.100" or 0.200" depths. The
0.200" depth allows for easy rear
mounting of the connector and
maintains proper mating with the
cord plug. Also, the panel mounts
have two different Faston®terminal
sizes, 0.187" and 0.250" wide. Both
are rated at 50A, per UL 1977. The
PC mount versions have either
straight, right angle, or right angle
with a mounting post. They are
rated at 30A per UL 1977. The right
angle PC mount version with the post
allows for snap-in placement onto
the PC board during wave soldering.
The HPC cord plugs are offered
in straight, right angle, and an in-line
version. All have 0.250" Faston®
terminals, rated at 50A per UL
1977, which makes it easy to swap
out plugs. The unique feature of the
cord plugs is their “push to lock”
design. They do not require a 1/4
turn to engage the contacts – simply
push the connector in like an XLR.
This feature eliminates the need to
remember to turn the connector to
make contact with the contacts. To
disengage, simply push the latch lever
forward and pull the connector out.
The straight cord plug uses a twist
on handle, while the in-line and
right angle cord plugs use a snap-in
handle. The in-line connector mates
with both straight and right angle
cord plugs.
For those who find it more
convenient, we also offer a barrel
adapter which mates with either
straight or right angle cord plugs.
Ordering Information
Part Number Style Notes
HPCP41F Panel Rectangle, 0.100" flange depth, 0.250" faston terms
HPCP42F Panel Rectangle, 0.200" flange depth, 0.250" faston terms
HPCP41F1 Panel Rectangle, 0.100" flange depth, 0.187" faston terms
HPCP42F1 Panel Rectangle, 0.200" flange depth, 0.187" faston terms
HPCP410PC Panel Rectangle, 0.100" flange depth, straight PC terms
HPCP420PC Panel Rectangle, 0.200" flange depth, straight PC terms
HPCP410RA Panel Rectangle, 0.100" flange depth, right angle PC terms
HPCP420RA Panel Rectangle, 0.200" flange depth, right angle PC terms
HPCPR41F Panel Round, 0.100" flange depth, 0.250" faston terms
HPCPR42F Panel Round, 0.200" flange depth, 0.250" faston terms
HPCPR41F1 Panel Round, 0.100" flange depth, 0.187" faston terms
HPCPR42F1 Panel Round, 0.200" flange depth, 0.187" faston terms
HPCPR410PC Panel Round, 0.100" flange depth, straight PC terms
HPCPR420PC Panel Round, 0.200" flange depth, straight PC terms
HPCPR41F
HPCP41F
HPCP410RA
Speakon®is a registered trademark
of Neutrik Inc.
See Pages 61 and 62 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
51
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
HPC Connector Series
HPC Cord, & Adapter Style Series
Ordering Information
Part Number Style Notes
HPCC4F Cord Straight with 0.250" faston terms
HPCI4F Cord Inline with 0.250" faston terms
HPCC4RAF Cord Right angle with 0.250" faston terms
See Page 62 for Mechanical Drawings
HPCC4F
HPC14F
HPCC4RAF
Specifications
Mechanical
(Panel and Cord Mounts)
Shock: Per Mil-Std 202,
Method 213B, Cond. K
Vibration: Mil-Std 202,
Method 201A
Life: 1,000 rotational cycles
Cable Range (cord mount):
10AWG, 0.560" cable OD
maximum
Electrical
(Panel and Cord Mounts)
Voltage Rating: 1,500 AC RMS,
per Mil-Std 202, Method 301
Current Rating (Faston®termi-
nals): 50A RMS w/10AWG
wire, normal ambient, per
UL 1977
Current Rating (PC terminals):
30A per UL 1977
Contact Resistance: 1m1, 1.5m1
after 1,000 insertion/withdrawals
Insulation Resistance: > 2T 1
Environmental
(Panel and Cord Mounts)
Salt Spray: Mil-Std 202, Method
101D, Cond. B
Thermal Shock: Mil-Std 202,
Method 107G
Temperature Limits:
-55˚C to +85˚ C
Moisture Resistance: Mil-Std.
202, Method 106E
Life @ Ambient Temperature:
Mil-Std 202, Method 108A
Touchproof: IEC 65 and 1010-1
IP Rating: IEC 529, IP 25
Materials
(Panel and Cord Mounts)
Housings:
Thermoplastic UL 94V-0 rated
Seal Rings: Thermoplastic rubber
Contacts: Silver-plated over
copper alloy
* Please visit the product pages on our website for the most up-to-date product information
Ordering Information
Part Number Description
EHBNC2 BNC to BNC
EHBNCSC BNC to solder cup
EHRCA2 RCA to RCA
EHRCABNC RCA to BNC
EHUSB2 USB to USB
EH13942 IEEE1394 to IEEE1394
EHCAT62 Cat6 to Cat6
CONNECTORS
EH Series Receptacles
The EH Series consist of different
styles of popular connectors in our
E Series housing. This allows the
end user to punch one single hole
size and populate wall plates, gang
assemblies with different types of
connectors. Connector styles
include BNC feed-throughs, RCA
feed-throughs, USB feed-throughs,
IEEE 1394 Firewire feed-throughs,
BNC to solder cup, and RCA to
BNC.
Features
• Utilizes same panel cut-out as E
Series QG connectors
• Rugged metal shells
• Available with a wide variety of
popular feed-through
connectors
EHBNC2
EHRCA2
52
Note: For black finish add 'B' suffix
See Page 55 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
53
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Ordering Information
Part Number Style Notes
05BL5M Cord Male, straight, metal handle
05GM5M Cord Male, straight, plastic handle
05DL5M Cord Male, right angle, metal handle
57GB5F Panel Female
57PC5F Panel Female, right angle, PC mount
57PC5FS Panel Female, right angle, PC mount, shielded
2501F Cord Female, single contact, locking collar
2501M Cord Male, single contact, ext. threads
2501MP Panel Male, single contact, ext. threads
The 5-pin DIN connector has been
adopted by the audio industry as
the standard MIDI (Musical Instrument
Digital Interface) connector. Switchcraft
offers a wide variety of DIN and
mini-DIN connectors, however, only
the 5-pin DIN versions are shown in
this catalog. The more popular versions
used in the audio industry include
straight metal, straight plastic, and
right angle cord plugs, as well as
metal chassis and plastic right angle
PC mount versions.
The 2500 Series microphone
connectors are still used in many
retro-style microphones. Cable
mount versions can accommodate
cable OD’s up to 0.281".
Specifications
Materials
Shell: Die-cast zinc alloy, nickel
plated
Receptacle Mounting Flange:
Steel
Receptacle Body: Plastic
Insert Material: Plastic
Socket Contacts: Tin-plated
Pin Contacts: Tin-plated
Switching Contacts: Silver-plated
Cable Relief Bushing: Soft plastic
See Page 60 for
Mechanical Drawings
57GB5F 05DL5M
05BL5M
05GM5M
57PC5FS
2501M 2501MP
MIDI and 2500 Series
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
54 HP75BNC Series
True 75 Ohm BNC Series
The HP75BNC Series is a true 75
Ohm impedance BNC connector
series. All connectors meet stringent
guidelines for top performance. The
HP75BNC Series is available in a
wide variety of cable types. All use
standard crimping tools.
Features and Benefits
• True 75 Ohm impedance
• Rugged nickel-plated, machined
housings
• Gold-plated center pins enhance
performance
Specifications
Electrical
Contact Resistance: 75 Ohms
Voltage Rating: 500 Volts RMS
Return Loss: Less than -25 db
at 3 GHz
Insulation Resistance:
5000 Megohms minimum
Mechanical
Lifecycles: 500 minimum
Center Contact Retention:
6 lbs. minimum
Coupling Mechanism:
100 lbs. minimum
Force to Engage:
2.5 lbs. maximum
Environmental
Thermal Range: -65˚C to 165˚C
Moisture Resistance: Mil Std 202
Corrosion: Mil Std 202
Flammability: UL 94-V0
Vibration: Mil Std 202
Solvent Resistance: Mil Std 202
Finish
Body/Bayonet: Nickel-plated,
copper alloy
Center Conductor: 50 mi
gold-plated copper alloy
See Next Page for
Mechanical Drawings
HP75BNC1
Ordering Information
Part Number Crimp Info Cable Type
HP75BNC1 Pin .041 Hex Belden 8241, 8279, 82241
Ferrule .255 Gepco VJ59U
Comm/Scope 5563
HP75BNC2 Pin .041 Hex Belden 8281, 8281B, 9141, 88281, 9231, 8141,
Ferrule .324 Hex 9118, 9248
Gepco VP618PE, VP618PVC, VP6000
Comm/Scope 7501, 7506
HP75BNC7 Pin .041 Hex Belden 1694A, 1695A, 87120, 89120, 9066, 9114, 9659
Ferrule .278 Hex Gepco VSD2001, VSD2001TS
Comm/Scope 5729 ,5765, 2227K, 2227V, 2229V,
2275V, 2276V, 2279V
HP75BNC9 Pin .041 Hex Belden 1505A, 1506A, 8212, 8241F, 9167, 9259,
Ferrule .255 Hex Gepco VPM2000, VPM2000TS, VPM2000TK
Comm/Scope 2000, 5553, 5565, 5572
HP75BNC12 Pin .041 Hex Belden 1855A, 1865A
Ferrule .178 Hex Gepco VDM230, VDM250, RGB230/250 Series
Comm/Scope 7537, 7538
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
55
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Connector Dimension Drawings
True 75 Ohm BNC Series, EH Series
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
EHBNC2 EHRCA2
EHRCABNC
EHBNCSC
HP75BNC Series
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
56 Connector Dimension Drawings
Q-G®Audio -A, AA, AAA Series
A*F
AA*F
A*M
AA*M
AAA*FZ AAA*MZ
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
57
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
B*F B*M
C*F C*M
Connector Dimension Drawings
Q-G®Audio -B, C, D, E Series
D*F D*M
E3FSC and E3MSC
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
58 Connector Dimension Drawings
Q-G®Audio -J, K, P, R Series
PD3FSC1AU PD3MSC1AU
R*MZ R*FZ
J3FS K3FS
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
59
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Connector Dimension Drawings
Q-G®Audio -T Series
TB*M TY*F
TA*M TA*F
T3F
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
60 Connector Dimension Drawings
MIDI, Q-G®Audio -P Series
57GB5F 57PC5F
05BL5M 05GM5M
P*F P*M
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
61
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Connector Dimension Drawings
HPC Panel Style Series
HPC
[F] TERMINALS
[F1] TERMINALS
[PC] TERMINALS
[RA] + [RAP] TERMINALS
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
62 Connector Dimension Drawings
HPC Panel Style Series
HPC
* Please visit the product pages on our website for the most up-to-date product information
63
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
A wide variety of audio adapters are available from
Switchcraft. Ranges include XLR to XLR, XLR to RCA,
XLR to 1/4", along with a multitude of specialty adapters.
Our DMX adapters allow users to adapt from 5 pin DMX
controls to the more prevalent 3 pin XLR.
XLR to XLR, RCA, 1/4 ", TQ-G Adapter Series
AUDIO ADAPTERS
Ordering Information
Part Number Description
XLR to XLR
389 3 Pin female to 3 pin female
390 3 Pin male to 3 pin male
S3FM 3 Pin male to 3 pin female
S3F5M 3 Pin female to 5 pin male
S5F3M 5 Pin female to 3 pin male
XLR to RCA
321 3 Pin female XLR to male RCA
322 3 Pin female XLR to female RCA
323 3 Pin male XLR to male RCA
324 3 Pin male XLR to female RCA
XLR to 1/4"
383A 3 Pin female XLR to female 1/4", 3 cond.
384A 3 Pin male XLR to female 1/4", 3 cond.
386A 3 Pin female XLR to male 1/4", 3 cond.
387A 3 Pin male XLR to male 1/4", 3 cond.
XLR to TQ-G
TA01 3 Pin XLR female to 3 pin TQG female
TA02 4 Pin XLR female to 4 pin TQG female
TA04 3 Pin XLR male to 3 pin TQG female
TA05 4 Pin XLR male to 4 pin TQG female
389
S3FM
390
321
323
324
322
386A
383A
387A
384A
TA04 TA01
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
64
AUDIO ADAPTERS
1/4" to 1/4", RCA; RCA to RCA; & Miscellaneous Adapter Series
Ordering Information
Part Number Description
1/4" to 1/4"
361A Mono female to female
362A Stereo female to female
363 Mono male to male
340 2 Mono jacks parallel to mono plug
352A Stereo jack to mono plug
1/4" to RCA
330P 2 RCA jacks to mono plug, 4" cable
336A Female 1/4" to male RCA
345A Female RCA to male 1/4"
RCA to RCA
330F1 2 Female RCA parallel to 1 male RCA
330F2 1 Male and 1 female parallel to 1 male
349A Female to female
Miscellaneous
332A Old MC1M type to 1/4" female
365 Tini-Jax (.141") to RCA male
370A Female RCA to Tini-Plug (.141")
374 1/4" female to Tini-Plug (.141")
376 Tini-Jax (.141") to Micro-Plug (.097")
377 Micro-Jax (.097") to Tini-Plug (.141")
44 Female 2500 Series to 1/4" plug
363
361A
340
352A
336A
345A
330P
330F2
330F1
349A
365
374
332A
44
377 370A 376
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
65
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w w w . s w i t c h c r a f t . c o m
Jack Series
Littel Phone, Hi-D, Right Angle PC Mount 1/4", 1/4" Extension Jack Series
JACKS & PLUGS
Switchcraft offers an extensive variety of
1/4" commercial jacks. Littel phone jacks
offer open frame designs, Hi-D jacks offer
an enclosed, 94V-0 rated thermoplastic
housing, our RA jacks are designed for right
angle PC board layouts, and our Extension
jacks allow the end user to extend cable
lengths. All offer a wide range of options to
fit a multitude of needs. For mating plugs,
look to page 83 for all of the various options.
Specifications
Mechanical
Life: 10,000 insertion/withdrawal cycles,
minimum
Electrical
Contact Resistance: .030 ohms
maximum (initial), .050 ohms
maximum (after humidity, durability
exposure) Per Mil-Std-202E
Insulation Resistance: 10,000 MW
minimum (initial), 1,000 MW minimum
(after humidity)
Dielectric Withstanding Voltage: 500V,
60 Hz (rms) AC
Contact Rating: 1A, 25 VDC
Environmental
Thermal Range: -55˚C to +85˚C
(non-operating); -20˚C to +65˚C
(operating)
Thermal Shock: Per Mil-Std-202,
method 107
Humidity: Per Mil-Std-202, method 106
Salt Spray: Per Mil-Std 202, method 101
Materials
Mounting Bushing: Copper alloy,
nickel-plated
(RN & RA Series: Thermoplastic)
Insulation: Rigid plastic
Springs: Special copper alloy.
Integral contacts are standard in the iso-
lated switching circuits
Sleeve Terminal: Copper alloy
Hardware: Supplied with one Number
P10001 copper alloy nickel-plated hex
nut, and one Number S1022
steel nickel-plated washer
111
11
114BPCS
Z15J
RA49B11
RN112APC
80 120
133
128
See next page for ordering information
w w w . s w i t c h c r a f t . c o m
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
66
Ordering Information
Typical
Part No. Conductors Description Mating Plug Notes
Littel Phone Jacks
11 2 single open 280
12A 2 single closed 280
12B 3 double open 297
14B 3 double closed 297
Hi-D Jacks
111 2 single open 280
112B 3 double open 297
113BPC1M 3 tip closed, ring open 297 or PC terms, accepts Littel
(common to sleeve) 482NC and Mil-type plugs
114B 3 double closed 297
114BPC 3 double closed 297 PC terms
114BPCS 3 double closed 297 Springlock PC terms
114BPC1M 3 double closed 297 or PC terms, accepts Littel and
482NC Mil-type plugs, metric thread
Z15J 2 single open 187B 15A rated
Right Angle PC Mount 1/4" Jacks
RA49B11 2 single open 280
RN112APC 2 single closed 280
RA49C14B 3 double closed 297
1/4" Extension Jacks
80 2 single open 280 Screw terms, black handle
88 2 single open 280 Solder terms, black handle
120 2 single open 280 Screw terms, shielded handle
121 2 single open 280 Solder terms, shielded handle
131 3 double open 297 Solder terms, shielded handle
133 3 double open 298 Solder terms, shielded handle,
locking
830 3 double open 297 Screw terms, black handle
128 2 single open 280 Solder terms, shielded handle
1238 3 double open 297 Solder terms, shielded handle
Jack Series
See Pages 72–74 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
67
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
The TP or Thick Panel jacks are typical-
ly used in applications such as loud-
speaker enclosures and solid-body
guitars. Only premium materials are
used in the manufacture of these jacks.
Locking 1/4" jacks allow the end user
to lock the mating plug, providing
positive detent to the connection.
Also offered is a wide range of 1/8"
jacks and true 3.5mm jacks.
Specifications - Thick Panel Series
& Locking Jacks
Electrical
Insulation Resistance: 2 x 106 MW
at 500 VDC per Mil-Std-202,
method 302 (initial)
Dielectric Withstanding Voltage:
1,000 VAC (ms)
Life: 10,000 cycles minimum
Environmental
Thermal Range: -55˚C to +85˚C
(non operating); -20˚C to +65˚C
(operating)
Thermal Shock: Per Mil-Std-202,
method 107
Humidity: Per Mil-Std-202, method
106
Salt Spray: Per Mil-Std-202, method
101
Materials
Shell - Locking Jacks: Die-cast
zinc, with satin nickel-plating;
Black chrome over nickel-plating
on special order
Insert and Latch: Thermoplastic,
UL94V-0
Latch Release: Nickel-plated
die-cast zinc
Contact Springs: Tin-plated
copper alloy
Mounting Bushing - Thick Panel
Jacks: Nickel-plated copper alloy
with knurled flange
Insulating Spacer: Rigid plastic
(continued on next page)
152B
153
151
152
154
155
E111L
125
35RAPC7J
142A
35RAPC2BH3
42A
35PM2A
Jack Series
Thick Panel/Guitar, Locking 1/4", Tini, Tini-Extension, Micro, 3.5mm
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
68 Jack Series
(continued from previous page)
Insulator/Spring Mount:
Thermo-plastic
Springs: Copper alloy
Terminals: Tip: Copper alloy; Ring:
(Number 152B only) Copper
alloy; Sleeve: Steel, tin-plated
Hardware - Thick Panel Jacks:
Supplied with one, Number
P10531 nickel-plated copper
alloy hex nut; and one, Number
P1476 nickel-plated copper
alloy flat washer
Specifications - 35RAPC Series
Electrical
Contact Resistance: 20 milliohms
maximum
Insulation Resistance: 100
milliohms minimum at 250 VDC
Dielectric Withstanding Voltage:
250 VAC
Life: 5,000 cycles, minimum
Insertion Force: 0.88 pounds -
3.5 pounds
Withdrawal Force: 0.88 pounds -
2.64 pounds
Materials
Coil Spring: Steel Wire
Bushing: Nickel-plated copper alloy
Terminal: Silver-plated copper alloy
Tip Spring: Silver-plated copper alloy
Shunt Terminal: Plated copper alloy
Cover: Thermoplastic, transparent
UL 94V-2
Body: Thermoplastic, UL 94V-1
black color
Specifications - 35PM Series
& Tini Jack Series
Electrical
Contact Resistance: .075 ohms
maximum
Insulation Resistance: 5,000 MW
minimum
Dielectric Withstanding Voltage:
250 VAC maximum
Life: 5,000 insertion/withdrawal
cycles, minimum
Contact Rating: .25A, 48 VDC
Materials
Mounting Bushing: Nickel-plated
copper alloy
Insulating Spacers: Rigid plastic
Springs: Copper alloy
Sleeve Terminal: Tin-plated
copper alloy
Hardware: Supplied with one,
Number P11501 nickel-plated
brass locknut; and one, Number
S17901 nickel-plated steel
flat washer
Ordering Information
Typical
Part No. Conductors Description Mating Plug Notes
Thick Panel/Guitar Jacks (1/4")
151 2 single open 280 Nickel finish
152 3 double open 297 Brass finish
152B 3 double open 297 Nickel finish
153 2 single open 280 Gold-plated springs,
electro-polish brass finish,
9/16-12 UNC wood thread
154 3 double open 297 Gold-plated, no cable clamp
155 3 double open 297 Black satin chrome finish,
no cable clamp
Locking 1/4" Jacks
E111L 2 single open 280
E112BL 3 double open 297
Tini-Jacks (.141")
41 2 single open 750
42A 2 single closed 750
142A 2 single closed 750
PC142A 2 single closed 750 PC terms
Tini-Extension Jacks (.141")
125 2 single open 750
3.5mm Jacks
35RAPC2AV 2 single closed Threaded bushing, PC terms
35RAPC2BH3 3 double open 35HDNN Threaded bushing, PC terms
35RAPC3BH3 3 tip closed, ring open 35HDNN Threaded bushing, PC terms
35RAPC4BH3 3 double closed 35HDNN Threaded bushing, PC terms
35RAPC7J 3 top jack dual open 35HDNN Dual vertical jack
bottom jack dual closed
35RAPC7JS 3 top jack dual open 35HDNN Dual vertical jack, shielded
bottom jack dual closed
35PM1 2 single open 750
35PM2A 2 single closed 750
See Pages 75-79 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
69
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Jack Series
Phono, Phono Extension, TT or Bantam, MT 1/4" Jack Series
Phono jacks, more commonly called RCA jacks offer low
cost, two conductor connections. TT or bantam jacks are
the same type used in our audio patchbays. Typically
used in high end studio applications. MT or 1/4" jacks are
just a bigger version of the TT jacks. Same high quality,
just in a larger package.
Specifications - Phono Jacks
Materials
Frame and Shell: Steel, plated
Center Terminal: Plated copper alloy (3517PC); Plated
copper alloy (3514PC)
Insulator: Thermoplastic (3514PC) Ceramic and glass
filled thermoplastic (3517PC)
For 3515PC Only:
Contact and Saddle: Spring type copper alloy, copper
alloy pre-tinned
Shell: Steel or copper alloy, plated
Insulator Bushing: Ceramic
Insulator Spacer: Glass-filled thermoplastic
Specifications - TT and MT Jacks
Mechanical
Life: Commercial – 30,000 insertion/withdrawal
cycles, minimum; Military – 30,000 insertion/
withdrawal cycles, minimum
Mechanical Shock: Military – Per Mil-Std-202,
method 213, Test Condition H (75g)
Vibration: Military – Per Mil-Std-202, method 213,
(10-55 Hz)
Electrical
Contact Resistance: Commercial – .030 ohms maximum
(initial), .050 ohms maximum (after humidity, durability,
exposure); Military – .010 ohms maximum (initial),
.020 ohms maximum (after life), .10 ohms maximum
(after salt spray)
Insulation Resistance: Commercial – 10,000 M1
minimum (initial), 1,000 M1minimum (after humidity);
Military – 10,000 M1minimum (initial), 1,000 M1
minimum (after humidity, durability exposure)
Dielectric Withstanding Voltage: 500V, 60 Hz (rms) AC
(continued on next page)
3514PC 3501FR
3501FP
3503
YMT334BN
TT34BNY
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
70 Jack Series
Ordering Information
Typical
Part No. Conductors Description Mating Plug Notes
Phono Jacks
3501FP 2 single open 3502A Front mounting
3501FR 2 single open 3502A Rear mounting
3514PC 2 single open 3502A Right angle, PC mount
3517PC 2 single open 3502A Right angle, PC mount
BPJR** 2 single open 3502A Rear mounting, colored insulators
BPJR**AU 2 single open 3502A Same as above, with gold-plating
BPJF** 2 single open 3502A Front mounting, colored insulators
BPJF**AU 2 single open 3502A Same as above, with gold-plating
BPJJ** 2 single open 3502A Feed through mount
BPJJ**AU 2 single open 3502A Same as above, with gold-plating
Phone Extension Jacks
3503 2 single open 3502A
TT or Bantam Jacks
TT34B 3 double closed TT253NC
TT34BNY 3 double closed TT253NC Nickel-plated frame, fanned terminals
WTT34B 3 double closed TT253NC Wire-wrap terminals
MT 1/4" Jacks
MT334B 3 double closed 482NC
WMT334B 3 double closed 482NC Wire-wrap terminals
YMT334BN 3 double closed 482NC Nickel-plated frame, fanned terminals
** To designate color of insulator, use: 01– Black, 02 – Red, 03 – White, 04 – Yellow, 05 - Blue, 06 - Green
See Pages 80-82 for Mechanical Drawings
(continued from previous page)
Environmental
Thermal Range: Commercial –-
55˚C to +85˚C (non-operating), -
20˚C to +65˚C (operating);
Military –
-55˚C to +85˚C (non operating), -
40˚C to +65˚C
(operating)
Thermal Shocks: Commercial –
Per Mil-Std-202, method 107;
Military – Per Mil-Std-202,
method 107
Humidity: Commercial –
Per Mil-Std-202, method 106;
Military — 0% to 95% operating
and non-operating
Salt Spray: Commercial –
Per Mil-Std-202, method 101;
Military – Per Mil-Std-202,
method 101 (48 hours)
Moisture Resistance: Military –
Per Mil-Std-202, method 106
(240 hours)
Materials
Frame: Steel, nickel plated
Springs: Copper alloy
Contacts: Welded, crossbar, gold
plated
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
71
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Ordering Information
Part Number Style Notes
712A Panel 0.100" center pin
722A Panel 0.080" center pin
732A Panel 0.050" center pin
760 Cord 0.100" center hole, black handle
765 Cord 0.100“ center hole, red handle
S760 Cord 0.080" center hole, black handle
S765 Cord 0.080" center hole, red handle
860 Cord 0.050" center hole, black handle
865 Cord 0.050" center hole, red handle
760K Cord 0.100" center hole, black handle, locking
S760K Cord 0.080" center hole, black handle, locking
Power/Jacks Plugs Series
700, S700, 800 Cord & Panel Style Series
Low power AC to DC power jacks
and plugs are used throughout the
audio industry, to power a wide
variety of products. Switchcraft offers
both cord plug and panel mount
versions, including locking and
non-locking versions.
Specifications - Plugs
Electrical:
Current (Carry): 5 amps
Materials
Plug Sleeve and Pin: Nickel-plated
copper alloy
Lock Ring: Nickel-plated copper
alloy
Lock Ring Thread Size: 5/16" -
32 UNEF 2B
Finger Insulator: Molded plastic
Insulating Washers: Rigid plastic
Sleeve Terminal: Copper alloy,
electro-tinned
Handle: Molded plastic
Handle Thread Size: 5/16" -
24 UNF 2B
Specifications - Jacks
Mechanical
Life: 10,000 insertion/withdrawal
cycles minimum
Insertion/Withdrawal Forces:
3 pound insertion (maximum),
4 ounce minimum withdrawal
Electrical
Contact Resistance: .01 ohms
maximum (initial), .02 ohms
maximum (after humidity,
durability exposure), .1 ohms
maximum (after salt spray)
Insulation Resistance: 10,000
MW minimum (initial), 1,000 MW
minimum (after humidity,
durability exposure)
Dielectric Withstanding Voltage:
500 VAC maximum
Contact Rating: 5A, 12 VDC
resistive
Materials
Housing: Molded plastic
Mounting Bushing and Hex Nut:
Plated copper alloy
Pin, Spring and Terminals: Plated
copper alloy
Insulators: Rigid plastic
Hardware: Supplied with one
Number P2439 nickel-plated
brass hex nut, and one Number
P2441 nickel-plated steel flat
washer
760K
712A
760
See Next Page for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
72 Jack Series Dimension Drawings
Littel Phone, Hi-D, 1/4" Extension, 700 Panel Jack Series
11, 12A, 12B, 14B
12A Series 12B Series 14B Series11 Series
Z15J 80
712A
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
73
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Jack Series Dimension Drawings
Littel Phone, Hi-D, 1/4" Extension Jack Series
PC Terminals for Hi-D Jax - 113BPC1M, 114BPC1M
Spring Lock PC Terminals for Hi-D Jax - 114BPCS
Solder Lug Terminals for Hi-D Jax - 111, 112B, 114B
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
74 Jack Series Dimension Drawings
Right Angle PC Mount 1/4" Jack Series
RA49B11 RA49C14B
RN112APC
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
75
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Jack Series Dimension Drawings
Thick Panel/Guitar, Locking 1/4", Tini, Tini Extension Jack Series
E111L, E112BL
151, 153
41, 42A 125
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
76 Jack Series Dimension Drawings
Micro, 3.5mm Jack Series
142, PC142A
35RAPC2AV
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
77
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Jack Series Dimension Drawings
3.5mm Jack Series
35RAPC2BH3, 35RAPC3BH3, 35RAPC4BH3
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
78 Jack Series Dimension Drawings
3.5mm Jack Series
35RAPC7J, 35RAPC7JS
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
79
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Jack Series Dimension Drawings
3.5mm Jack Series
35PM1
35PM2A
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
80 Jack Series Dimension Drawings
Phono and Phono Extension Jack Series
3514PC, 3517PC
3501FP BPJJ Series
BPJF Series
BPJR Series
3501FR
3503 Extension
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
81
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Jack Series Dimension Drawings
TT or Bantam Jack Series
TT34B, TT34BN,WTT34B
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
82
MT334B,WMT334B,YMT334BN
Jack Series Dimension Drawings
MT 1/4" Jack Series
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
83
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Plug Series
Littel 1/4", Right Angle 1/4", Silent, Super Heavy Duty Plug Series
Switchcraft Littel Plugs all feature
one-piece tip rods for added strength
and durability. All are offered in a
wide variety of configurations,
including straight, right angle, shielded,
screw or solder terminals. The
Heavy Duty Speaker plugs have
larger cable clamps and are rated at
15A. The Silent plugs have a unique
circuit-closing device which stops
hums, pops, and squeals when the
plug is removed or inserted from
the jack. Miti plugs feature heavy
duty brass construction, rugged
cable clamps, and spring flex reliefs.
All plugs meet EIA standards for tip
configuration, which ensures you
they mate properly with the jack.
Specifications
Electrical
Contact Resistance (typical De-
pends on Mating Jack):
< 0.020 ohms
Dielectric Withstand Voltage: 500
VAC (minimum)
Insulation Resistance @ 500 VDC:
2,000 megohms (minimum)
Insulation Resistance (after
Mil-Std-202 Salt Spray): 1,000
megohms (minimum)
Working Voltage: 250 VAC, 140
VDC
Insert/Withdrawal Force:
Depends on Mating Jack
Soldering Requirement:
ANSI/J-Std-001
Temperature Range: -40˚C to
+85˚C
U.L. Component Recognition File
No: E118169
Life: Depends on Mating Jack
Materials
Tip: Nickel-plated copper alloy
Sleeve: Nickel-plated copper alloy
Handle: Nickel-plated copper alloy
Tip Terminal: Copper alloy,
electrotin-plated
Cable Clamp: Copper alloy,
electro-tinplated
226
187
250
184
280
181
174S
See Next Page for Ordering Information
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
84
Ordering Information
Typical
Part No. Conductors Terminals Mating Jack Handle Notes
1/4"" Littel Plug Series
240 2 Screw 11 Black
245 2 Screw 11 Red
250 2 Solder 11 Black
260 2 Screw 11 Black
270 2 Screw 11 Black
280 2 Solder 11 Shielded
281 2 Solder 11 Shielded Unassembled
580 2 Solder 11 Shielded Diecast handle
285 2 Solder 11 Shielded Unassembled
285L 2 Solder 11 Shielded Larger cable clamp
267 3 Solder 12B Black
290 3 Screw 12B Shielded
297 3 Solder 12B Shielded
299 3 Solder 12B Shielded Diecast handle
Heavy Duty Speaker Plugs
184 2 Solder 11 or Z15J Shielded Accepts Cable OD up to .375"
188 2 Solder 11 or Z15J Shielded Accepts Cable OD up to .450"
187 2 Solder 11 or Z15J Shielded Accepts Cable OD up to .330"
187B 2 Solder 11 or Z15J Shielded Black Handle, accepts Cable
OD up
to .330"
Right Angle 1/4" Plugs
226 2 Solder 11 Shielded
228 2 Solder 11 Shielded Flat handle
236 3 Solder 12B Shielded
238 3 Solder 12B Flat handle
Silent Plug
172 2 Screw 11 Shielded
181 2 Solder 11 Shielded
Miti Plugs
174S 2 Solder 11 or Z15J Shielded Brass finish, spring flex relief
Plug Series
See Pages 88-89 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
85
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Plug Series
Tini, Micro, 3.5mm Stereo, Right Angle 3.5mm Stereo, Phono,
Right Angle Phono Plugs Series
Switchcraft offers a wide variety
of Tini, Micro, 3.5mm, and RCA or
Phono plugs. Tini plugs are 2
conductor plugs with plug finger
diameters of .141" or 3.57mm.
Micro plugs are 2 conductor plugs
with plug finger diameters of .097"
or 2.47mm. Our 35HD Series are
true 3.5mm plugs, available in both
straight and right angle versions;
and available only in 3 conductor.
The RCA or Phono plugs come with
either hollow pins or solid pins. The
3502 offers hollow pins and stan-
dard size handle, the 3502L offers
the same pin, but with a larger han-
dle, accommodating cables up to
.290". The 3502A and 3502RA
Series offer solid pins and the larger
cable clamps and handles. The 3558
Series offers a low cost alternative,
with hollow pins and plastic handles.
Specifications
Mechanical
Life rating: 5,000 insertion/
withdrawals
Insertion/Withdrawal Force: 1 lb
(depending on mating jack)
Electrical
Insulation Resistance:
> 100 megohms
Dielectric Withstanding Voltage:
250 VAC
Environmental
Thermal Range: -55˚C to +85˚C
(non operating); -20˚C to 65˚C
(operating)
Thermal Shock: Mil-Std 202,
method 107
Humidity: Mil-Std 202,
method 106
Salt Spray: Mil-Std 202,
method 101
(continued on next page)
750
850
851
3502ABAU
3502
3502RA
35HDBAU
35HDNN35581
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
86
Ordering Information
Typical
Part No. Conductors Terminals Mating Jack Handle Notes
Tini-Plug (.141")
740 2 Screw 41 Black
750 2 Solder 41 Black
755 2 Solder 41 Red
780 2 Solder 41 Shielded
Micro-Plugs (.097")
850 2 Solder TR2A Black
855 2 Solder TR2A Red
851 2 Solder TR2A Black Locking version
880 2 Solder TR2A Shielded
881 2 Solder TR2A Shielded Locking version
3.5mm Stereo Plugs
35HDNN 3 Solder Shielded
35HDBAU 3 Solder Black Shielded Gold-plated finger
35HDNAU 3 Solder Shielded Gold-plated finger
3.5mm Right Angle Stereo Plugs
35HDRANN 3 Solder Shielded
35HDRABAU 3 Solder Black Shielded Gold-plated finger
35HDRAAU 3 Solder Shielded Gold-plated finger
Phono Plugs
3502 2 Solder 3501FP Shielded Hollow Pin
3502A 2 Solder 3501FP Shielded Large cable clamp, solid pin
3502AAU 2 Solder 3501FP Shielded Gold-plated finger
3502ABAU 2 Solder 3501FP Black shielded Gold-plated finger
3502L 2 Solder 3501FP Shielded Hollow pin, large cable clamp
35581 2 Solder 3501FP Red Plastic handle
35582 3 Solder 3501FP Black Plastic handle
35585 3 Solder 3501FP White Plastic handle
Right Angle Phono Plugs
3502RA 2 Solder 3501FP Shielded
3502RABAU 2 Solder 3501FP Black Shielded Gold-plated finger
3502RAAU 2 Solder 3501FP Shielded Gold-plated finger
Plug Series
See Pages 90-92 for Mechanical Drawings
Materials
Tip, Rod and Body (also integral
coupling collar on lock micro-plug):
Nickel-plated copper alloy
Insulation: Molded thermoplastic
Sleeve Termination and Cable
Clamp: Tinned copper alloy
Handle: Nickel-plated copper
alloy, or anodized aluminum,
or thermoplastic. See factory
for details.
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
87
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
Plug Series
TT or Bantam, Mil-Style 1/4" Plugs Series
Switchcraft leads the industry when
developing innovative TT and MT
Style plugs. Our “N” version plugs
offer nickel-plated plug fingers to
reduce tarnishing and corrosion.
Our “NC” version plugs not only
offer nickel-plated plug fingers, but
also large, easy to use solder cups
and terminals, plus easy to use
cable clamps that really secure your
cable to the plugs.
Specifications
Materials
Tip Rod, Body and Screws:
Copper alloy, natural finish
Terminals (NC Version): Tinned
copper alloy
Insulation: Thermoplastic, per
Mil-P-22985, Type II, Class 1
Handles: Thermoplastic, Type 6,
per Mil-M-20693, Type II
Shielded (NC Version): Machined
from copper alloy, nickel-plated
482
482NC
TT253NC
TT254
Ordering Information
Part No. Conductors Terminals Handle Notes
TT or Bantam Plugs
TT253 3 Screw Black
TT253N 3 Screw Black Nickel-plated finger
TT253NC 3 Solder Black Nickel-plated finger
TT254 3 Screw Red
TT254N 3 Screw Red Nickel-plated finger
TT254NC 3 Solder Red Nickel-plated finger
Mil-Style 1/4 Plugs
480 3 Screw Black 0.206" OD
482 3 Screw Red
482N 3 Screw Red Nickel-plated finger
482NC 3 Solder Red Shielded Nickel-plated finger
482NCP 3 Solder Red Nickel-plated finger
483 3 Screw Black
483N 3 Screw Black Nickel-plated finger
483NC 3 Screw Black Shielded Nickel-plated finger
483NCP 3 Solder Black Nickel-plated finger
484 3 Screw Red 0.206" OD
485NC 3 Solder Shielded Nickel-plated finger
See Page 93 for
Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
88 Plug Series Dimension Drawings
Littel Plug 1/4" Series
188
260
187BL
280 T ypical
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
89
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Plug Series Dimension Drawings
Littel Right Angle 1/4", Silent, Super Heavy Duty Plug Series
172
228 Right Angle 1/4" Plugs
174S Super Heavy Duty Plug
236 Right Angle 1/4" Plugs
181 Silent Plug
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
90 Plug Series Drawings
Tini, Micro Plug Series
740, 750 Tini-Plugs
850, 851 Micro Plugs
740 Screw Terminals Series 750 Clamp-Lug Ter minals
850 (typical) Series 851 (typical) Series
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
91
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Plug Series Drawings
35HD 3.5mm Stereo Plug Series
35HDNN, 35HDBAU, 35HDNAU
35HDRANN, 35HDRABAU, 35HDRAAU
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
92 Plug Series Drawings
Phono and Phone Right Angle Plug Series
3502, 3502A, 35581 Phono Plug
3502RA Plug
3502 Series
3502A Series
35581 Series
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
93
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
Plug Series Drawings
TT or Bantam, Mil-Style 1/4" Plug Series
TT253,TT253NC Plug
480, 482, 482NC, 484 Mil-Style 1/4" Plug
TT253 Series
TT253NC Series
480 Series
482 Series 484 Series
482NC Series
NO. 0-80 TERMINAL
SCREWS
* Please visit the product pages on our website for the most up-to-date product information
94 Switch Series
Guitar and Knobs, and Broadcast Switch Series
SWITCHES
The 12000 Series switches are
premium grade switches used
primarily in guitars as pick-up
switches. The largest names in the
industry rely on our switches for
quality and durability. Our 84000
Series and PL Series switches are
used in broadcast studios, theater
lighting, anywhere large illuminated
switches are needed.
Specifications - 12000 Series
Electrical
Contact Ratings: Fine silver contacts
rated at 3A, 300W maximum
AC non-inductive load standard.
Other contacts available
Leakage Resistance: 1,000 MW
or greater
Dielectric Strength: 250 VDC
Materials
Frame: Copper alloy, plated
(3,000, 13,000); Steel, plated
(12,000)
Bushing and Shaft: Copper alloy,
plated
Springs: Copper alloy
Knob: Black molded thermoplastic
Mounting Hardware: Knurled copper
alloy locknut T10711, supplied.
P10531 hex locknut, special
order
Insulation: Rigid plastic spacers
with plastic tubing through
stack. Rigid plastic and/or
thermoplastic lifters. Thermoplas-
tic cam on actuator end
Specifications - 8400 Series
Electrical
Temperature Range: -22˚F to
158˚F (-30˚C to +70˚C)
Dielectric Strength: 1 kV DC
Leakage Resistance: 1,000 MW
or greater
Materials
Mounting/Retaining Clips and
Covers: Steel, plated
Contact Ratings: Gold crossbar
rated at 1A, 200W Maximum
AC non-inductive loads
(continued on next page)
12011
12010
12017
12013
12014
12012
12015
12016
Note: Knobs must be ordered separately.
84206L
PL106205
* Please visit the product pages on our website for the most up-to-date product information
SWITCHES
95
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w w w . s w i t c h c r a f t . c o m
Ordering Information
Part Number Circuitry Description
Guitar Switches
12010 SPST(NC)/SPST(NC) Straight, nickel finish, riveted silver contacts
12011 SPST(NC)/SPST(NC) Straight, bright brass finish, riveted silver contacts
12012 SPDT(non-shorting)/SPST(NC) Right angle, nickel finish, welded silver contacts
12013 SPST(NC)/SPST(NC) Right angle, nickel finish, welded silver contacts
12014 SPST(NC)/SPST(NC) Right angle, black finish, welded silver contacts
12015 DPDT(NC)/DPDT(NC) Right angle, nickel finish, welded silver contacts
12016 SPST(NC)/SPST(NC) Right angle, bright brass finish, riveted silver contacts
12017 SPST(NC/SPST(NC) Right angle, nickel finish, welded gold contacts
Knobs
T12742 Black
T12745 White
T127410 Ivory
P2912 Amber
Broadcast Switches
84206L DPDT 2 Position, locking
84306L SPDT(non-shorting) both sides 3 Position, locking
84312L DPDT both sides 3 Position, locking
84324L DPDT both sides 3 Position, locking
K131 Filter kit, 3 of ea. (amb, blu, grn, red, wht, and yel)
PL106205 DPDT Momentary, single lamp
PL206205 DPDT Momentary, twin lamp
PL106705 DPDT Push-lock/Push-release, single lamp
PL206705 DPDT Push-lock/Push-release, twin lamp
Switch Series
See Next Page for Mechanical Drawings
(continued from previous page)
Springs: Copper alloy, plated
Lamp Terminals: Copper alloy, plated
Lamp Socket: Zinc, plated
Terminals: Copper alloy, plated,
straight solder lugs
Housing, Escutcheon, Knob,
Actuator and Switching Stacks
Insulation: Molded plastic
Specifications - PL Series
PUSH-LITE Switches Series and
PL Indicators
Contacts
Welded crossbar Gold Alloy,
rated at 2 amps., 200 watts
max., AC non-inductive load.
Electrical
6,000 Minimum Life (Gold
Alloy Contacts) per UL 1054.
Materials
Push-Lite Switch Assemblies:
Housing, Lifters, Switch Modules,
Barriers and Pushbuttons:
Molded Plastics
Contacts Springs: Phosphor
Bronze, Silver Plated
Lamp Terminals: Brass, Silver plated
Lamp Socket, Light Divider and
Yoke Assembly: Nickel Silver
Mounting Bracket and Retaining
Clips: Steel with iridescent
iridite over Cadmium Plating
Series PL Pushbuttons:
Housing, Color Filter Inserts and
Display Screens: High impact
thermoplastic
PL Indicators:
Housing: Molded glass filled
Plastics
Mounting Bracket: Steel, irides-
cent over cadmium Plating.
Lamp Retainer and Terminals:
Nickel Silver.
Display Screen (Pushbutton):
Molded Plastics.
* Please visit the product pages on our website for the most up-to-date product information
SWITCHES
96 Switch Series Drawings
Guitar and Knobs, and Broadcast Switch Series
12000 Series RA Lev-R®Switches 84000 Series Lever-Lite®Switches
PL Series Push-Lite®Switches
12000 Series Straight Lev-R®Switches
* Please visit the product pages on our website for the most up-to-date product information
NOTES
97
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
INDEX
98
05AD05 .........................45
05AK05..........................45
05AK25..........................45
05AN05 .........................45
05AN15 .........................45
05AN25 .........................45
05AN80 .........................45
05AU05 .........................45
05AU80 .........................45
05BL5M ........................53
05DL5M ........................53
05GM5M.......................53
10BF10..........................45
10BK10..........................45
10BN10 .........................45
11...................................66
111 ................................66
112B ..............................66
113BPC1M....................66
114B ..............................66
114BPC .........................66
114BPC1M....................66
114BPCS.......................66
120 ................................66
12010 ............................95
12011 ............................95
12012 ............................95
12013 ............................95
12014 ............................95
12015 ............................95
12016 ............................95
12017 ............................95
121 ................................66
1238 ..............................66
125 ................................68
128 ................................66
12A ................................66
12B ................................66
131 ................................66
133 ................................66
142A ..............................68
14B ................................66
151 ................................68
152 ................................68
152B ..............................68
153 ................................68
154 ................................68
155 ................................68
15AK15..........................45
172 ................................84
174S ..............................84
181 ................................84
184 ................................84
187 ................................84
187B ..............................84
188 ................................84
18QD18.........................45
18QF18 .........................45
18QH18.........................45
20QD20N ......................45
20QF20N.......................45
20QH20N ......................45
226 ................................84
228 ................................84
236 ................................84
238 ................................84
240 ................................84
245 ................................84
250 ................................84
2501F ............................53
2501M...........................53
2501MP.........................53
25AF25..........................45
25AK25..........................45
25AK82..........................45
25AN25 .........................45
260 ................................84
267 ................................84
270 ................................84
280 ................................84
281 ................................84
285 ................................84
285L ..............................84
290 ................................84
297 ................................84
299 ................................84
30AK30..........................45
30AN30 .........................45
30AR30 .........................45
321 ................................63
322 ................................63
323 ................................63
324 ................................63
330F1 ............................64
330F2 ............................64
330P ..............................64
332A ..............................64
336A ..............................64
340 ................................64
345A ..............................64
349A ..............................64
3501FP ..........................70
3501FR..........................70
3502 ..............................86
3502A............................86
3502AAU.......................86
3502ABAU ....................86
3502L ............................86
3502RA .........................86
3502RAAU ....................86
3502RABAU..................86
3503 ..............................70
3514PC..........................70
3517PC..........................70
352A ..............................64
35581 ............................86
35582 ............................86
35585 ............................86
35HDBAU .....................86
35HDNAU .....................86
35HDNN........................86
35HDRAAU...................86
35HDRABAU ................86
35HDRANN...................86
35PM1...........................68
35PM2A ........................68
35RAPC2AV ..................68
35RAPC2BH3 ...............68
35RAPC3BH3 ...............68
35RAPC4BH3 ...............68
35RAPC7J.....................68
35RAPC7JS...................68
361A ..............................64
362A ..............................64
363 ................................64
365 ................................64
370A ..............................64
374 ................................64
376 ................................64
377 ................................64
383A ..............................63
384A ..............................63
386A ..............................63
387A ..............................63
389 ................................63
390 ................................63
41...................................68
42A ................................68
44...................................64
480 ................................87
482 ................................87
482N..............................87
482NC ...........................87
482NCP .........................87
483 ................................87
483N..............................87
483NC ...........................87
483NCP .........................87
484 ................................87
485NC ...........................87
516-090-000-301...........20
516-090-000-302...........20
516-120-000-101...........20
516-120-000-102...........20
516-290-500 ..................20
516-290-590 ..................20
57GB5F .........................53
57PC5F..........................53
57PC5FS .......................53
580 ................................84
712A ..............................71
722A ..............................71
732A ..............................71
740 ................................86
750 ................................86
755 ................................86
760 ................................71
760K ..............................71
765 ................................71
780 ................................86
80...................................66
830 ................................66
84206L ..........................95
84306L ..........................95
84312L ..........................95
84324L ..........................95
850 ................................86
851 ................................86
855 ................................86
860 ................................71
865 ................................71
88...................................66
880 ................................86
881 ................................86
A*F ................................46
A*FB..............................46
* Please visit the product pages on our website for the most up-to-date product information
INDEX
99
w w w . s w i t c h c r a f t . c o m
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
A*FBAU ........................46
A*FL ..............................46
A*M...............................46
A*MB ............................46
A*MBAU.......................46
A*ML ............................46
AA*F..............................46
AA*FB ...........................46
AA*FBAU......................46
AA*FL ...........................46
AA*M ............................46
AA*MB..........................46
AA*MBAU ....................46
AA*ML ..........................46
AAA*FBAUZ .................46
AAA*FBZ ......................46
AAA*FPBAUZ ...............46
AAA*FPBZ ....................46
AAA*FPZ.......................46
AAA*FZ .........................46
AAA*MBAUZ................46
AAA*MBZ .....................46
AAA*MPBAUZ .............46
AAA*MPBZ...................46
AAA*MPZ .....................46
AAA*MZ .......................46
B*F ................................47
B*FB..............................47
B*M...............................47
B*MB ............................47
BPJF**..........................70
BPJF**AU.....................70
BPJJ** ..........................70
BPJJ**AU.....................70
BPJR** .........................70
BPJR**AU ....................70
C*F ................................47
C*FB..............................47
C*M...............................47
C*MB ............................47
D*F................................47
D*FB .............................47
D*FBAU ........................47
D*FS..............................47
D*M ..............................47
D*MB............................47
D*MBAU.......................47
D*MS ............................47
E111L ............................68
E112BL..........................68
E3FSC ...........................47
E3FSCB .........................47
E3FSCBAU....................47
E3MSC ..........................47
E3MSCB .......................47
E3MSCBAU ..................47
EH13942 .......................52
EHBNC2........................52
EHBNCSC .....................52
EHCAT62.......................52
EHRCA2 ........................52
EHRCABNC ..................52
EHUSB2 ........................52
HP75BNC1....................54
HP75BNC12..................54
HP75BNC2....................54
HP75BNC7....................54
HP75BNC9....................54
HPCC4F.........................51
HPCC4RAF....................51
HPCI4F ..........................51
HPCP410PC..................50
HPCP410RA..................50
HPCP41F.......................50
HPCP41F1.....................50
HPCP420PC..................50
HPCP420RA..................50
HPCP42F.......................50
HPCP42F1.....................50
HPCPK112F ..................30
HPCPK112F1 ................30
HPCPK1B ......................30
HPCPK324F ..................30
HPCPK324F1 ................30
HPCPK3B ......................30
HPCPR410PC ...............50
HPCPR41F ....................50
HPCPR41F1 ..................50
HPCPR420PC ...............50
HPCPR42F ....................50
HPCPR42F1 ..................50
J3FS ..............................48
K131 ..............................95
K3FS ..............................48
K459 ................................4
K460 ................................4
MBPK175T....................43
MD10 ............................45
MD15 ............................45
MD3 ..............................45
MD6 ..............................45
MT334B ........................70
MT48FN ........................26
MT48HN .......................26
MT48K1FN....................24
MT48K1HN ...................24
MT48K1NN ...................24
MT48K1NS....................24
MT48K3FN....................24
MT48K3HN ...................24
MT48K3NN ...................24
MT48NN .......................26
MT48NS........................26
MT52FN ........................26
MT52HN .......................26
MT52K1FN....................24
MT52K1HN ...................24
MT52K1NN ...................24
MT52K1NS....................24
MT52K3FN....................24
MT52K3HN ...................24
MT52K3NN ...................24
MT52NN .......................26
MT52NS........................26
MTP24K7 ......................18
MTP48K1NO.................14
MTP48K1NS .................14
MTP48K3BPNS ............18
MTP48K3NO.................14
MTP48K3NS .................14
MTP48K3PBNO............18
MTP48K3SNO ..............14
MTP52K3BPNO............18
MTPFA48K1NO ..............8
MTPFA48K1NS ...............8
MTPH48K1NO ................5
MTPH48K1NS.................5
MTPH48K3NO ................5
MTPH48K3NS.................5
MTPH48K3SNO..............5
MVEZNPK175T.............42
MVJ*75T.......................39
MVJ*NT ........................39
MVP32K1*75T..............37
MVP32K1*NT ...............37
MVP32K2*75T..............37
MVP32K2*NT ...............37
MVP32K3*75T..............37
MVP32K3*NT ...............37
P*F ................................48
P*FB..............................48
P*M...............................48
P*MB ............................48
P2912 ............................95
PC142A .........................68
PD3FSC1.......................48
PD3FSC1AU .................48
PD3MSC1 .....................48
PD3MSC1AU ................48
PL106205......................95
PL106705......................95
PL206205......................95
PL206705......................95
PT1LA..............................4
PT2B................................4
QGPK116FB..................32
QGPK116MB ................32
QGPK18M8FB ..............32
QGPK1B........................32
QGPK332MFB ..............32
QGPK3B........................32
R*FBAUZ ......................48
R*FBZ ...........................48
R*FZ ..............................48
R*MBAUZ.....................48
R*MBZ ..........................48
R*MZ ............................48
RA49B11.......................66
RA49C14B ....................66
RN112APC ....................66
RS422H48N081............12
RS422H4N161 ..............12
RS422H4N162 ..............12
RS422H4N242 ..............12
RS422V4N081 ..............12
RS422V4N161 ..............12
RS422V4N162 ..............12
RS422V4N242 ..............12
RS422V4N322 ..............12
S3F5M...........................63
S3FM.............................63
S5F3M...........................63
S760 ..............................71
S760K............................71
S765 ..............................71
T127410 ........................95
* Please visit the product pages on our website for the most up-to-date product information
INDEX
100
T12742 ..........................95
T12745 ..........................95
T3F ................................48
TA*F ..............................49
TA*FB............................49
TA*FL ............................49
TA*M.............................49
TA*MB ..........................49
TA*ML...........................49
TA01 ..............................63
TA02 ..............................63
TA04 ..............................63
TA05 ..............................63
TB*M ............................49
TB*MB ..........................49
TT1 ................................45
TT10 ..............................45
TT122 ............................45
TT124 ............................45
TT126 ............................45
TT127 ............................45
TT128 ............................45
TT2 ................................45
TT253 ............................87
TT253N..........................87
TT253NC .......................87
TT254 ............................87
TT254N..........................87
TT254NC .......................87
TT3 ................................45
TT34B............................70
TT34BN .........................81
TT34BNY.......................70
TT4 ................................45
TT5 ................................45
TT6 ................................45
TT7 ................................45
TT8 ................................45
TT9 ................................45
TT96EDACNO...............20
TT96EDACNS ...............20
TTD1..............................45
TTD10............................45
TTD2..............................45
TTD3..............................45
TTD4..............................45
TTD5..............................45
TTD6..............................45
TTD7..............................45
TTD8..............................45
TTD9..............................45
TTEZN****0 .................10
TTP96ASFN...................28
TTP96ASHN..................28
TTP96ASNN..................28
TTP96K1FN ...................22
TTP96K1HN ..................22
TTP96K1NN ..................22
TTP96K3BPNS ..............18
TTP96K3FN ...................22
TTP96K3HN ..................22
TTP96K3NN ..................22
TTP96K5BPNS ..............18
TTPFA96K1NO................8
TTPFA96K1NS ................8
TTPH96K1NO .................5
TTPH96K1NS ..................5
TTPH96K3NO .................5
TTPH96K3NS ..................5
TTPW96K1HN...............16
TTPW96K1NN...............16
TTPW96K1NS ...............16
TTPW96K3HN...............16
TTPW96K3NN...............16
TTPW96K3NS ...............16
TY*F ..............................49
VAPK1HD*75T..............40
VAPK1HD*NT ...............40
VAPK1SD*75T ..............40
VAPK1SD*NT................40
VAPK3HD*75T..............40
VAPK3HD*NT ...............40
VAPK3SD*75T ..............40
VAPK3SD*NT................40
VJHD*75TX...................36
VJHD*NTX ....................36
VJSD*75TX ...................36
VJSD*NTX ....................36
VMAFN..........................40
VMPP ............................44
VMVHD*75T.................40
VMVHD*NT ..................40
VMVSD*75T .................40
VMVSD*NT...................40
VPP24K1HD*75T..........34
VPP24K1HD*NT ...........34
VPP24K1SD*75T ..........34
VPP24K1SD*NT ...........34
VPP24K3HD*75T..........34
VPP24K3HD*NT ...........34
VPP24K3SD*75T ..........34
VPP24K3SD*NT ...........34
VPP26K1HD*75T..........34
VPP26K1HD*NT ...........34
VPP26K1SD*75T ..........34
VPP26K1SD*NT ...........34
VPP26K3HD*75T..........34
VPP26K3HD*NT ...........34
VPP26K3SD*75T ..........34
VPP26K3SD*NT ...........34
VSPP..............................44
WMT334B.....................70
WTT34B ........................70
YMT334BN ...................70
Z15J...............................66
* Please visit the product pages on our website for the most up-to-date product information
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Switchcraft:
Z15J 25AN25X TTEZN10P3PINR TTEZN10PE90R TTEZN15PE56 TTEZN15PE90BG TTEZN15PIDCBG
TTEZN20PE90BG TTEZN20PIDCBG TTEZN20PIDCR TTEZNH10PIDCR TTEZNH20PIDCR TTP96K1E3HN
TTP96K1E3HNBG TTP96K1E3NN TTP96K1E3NNBG TTP96K1E3NS TTP96K1E3NSBG TTP96K3E3HN
TTP96K3E3HNBG TTP96K3E3NN TTP96K3E3NNBG TTP96K3E3NS TTP96K3E3NSBG TT253NC 05AK05X
05AD05X 05AN05X 05AN15X TT6PX 25AU25X 25AK25 25AK82 25AF25X TT253Z 25FN82 25AC25X
25AK84X 25FF25 25FK25 25FN25 25AC84 25AN25 25FK84 25AN84 TT1BK TT3BK TT2BK TT4BK
