ATC 100 B Series Porcelain Superchip (R) Multilayer Capacitors * Case B Size * Capacitance Range (.110" x .110") 0.1 pF to 1000 pF * High Q * Ultra-Stable Performance * Low ESR/ESL * High Self-Resonance * Low Noise * Established Reliability (QPL) * Extended WVDC up to 1500 VDC ATC, the industry leader, offers new improved ESR/ESL performance for the 100 B Series RF/Microwave Capacitors. This Series is now available with extended operating temperatures up to 175C. High Density porcelain construction provides a rugged, hermetic package. Typical functional applications: Bypass, Coupling, Tuning, Feedback, Impedance Matching and DC Blocking. Typical circuit applications: UHF/Microwave RF Power Amplifiers, Mixers, Oscillators, Low Noise Amplifiers, Filter Networks, Timing Circuits and Delay Lines. ENVIRONMENTAL TESTS ATC 100 B Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A. MOISTURE RESISTANCE: MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125C. Voltage Applied: 200% of WVDC for capacitors rated at 500 volts DC or less. 120% of WVDC for capacitors rated at 1250 volts DC or less. 100% of WVDC for capacitors rated above 1250 volts DC. ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): greater than 10,000 at 1 MHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): +90 20 PPM/C (-55C to +125C) +90 30 PPM/C (+125C to +175C) INSULATION RESISTANCE (IR): 0.1 pF to 470 pF: 106 Megohms min. @ +25C at rated WVDC. 105 Megohms min. @ +125C at rated WVDC. 510 pF to 1000 pF: 105 Megohms min. @ +25C at rated WVDC. 104 Megohms min. @ +125C at rated WVDC. IR above +125C is derated by one order of magnitude. WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2. DIELECTRIC WITHSTANDING VOLTAGE (DWV): 250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds. 150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds. 120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds. RETRACE: Less than (0.02% or 0.02 pF), whichever is greater. AGING EFFECTS: None PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure). CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater. OPERATING TEMPERATURE RANGE: 0.1 to 330 pF: from -55C to +175C 360 to 1000 pF: from -55C to +125C TERMINATION STYLES: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets with- stand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MILSTD-202, method 211. ATC # 001-807 Rev. S; 8/18 ATC 100 B Capacitance Values 1500 1500 121 131 1000 511 561 621 681 751 821 911 102 510 560 620 680 750 820 910 1000 VOLT 240 270 300 330 360 390 F, G, J, 430 K, M 470 1000 EXT 241 271 301 331 361 391 431 471 300 200 50 ATC PART NUMBER CODE J W 500 X T Series Packaging T - Tape and Reel, 1000 pc. qty.* TV - V ertical Orientation of Product, Tape and Reel, 1000 pc. qty.* I - Special Packaging. Consult Factory. *Consult ATC for other quantities Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. ATC Cap-Pac(R) packaging (100 pc. qty. std.) is also available. For this option, leave last field blank. Capacitance Tolerance Code Laser Marking CAPACITANCE TOLERANCE B C D F G J K WVDC Termination Code M Tol. 0.1 pF 0.25 pF 0.5 pF 1% 2% 5% 10% 20% The above part number refers to a 100 B Series (case size B) 91 pF capacitor, J tolerance (5%), 500 WVDC, with W termination (Tin / Lead, Solder Plated over Nickel Barrier), laser marking and Tape and Reel packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N ATC North America sales@atceramics.com 2 For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for additional performance data. T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 600 100 VRMS = 0.707 X WVDC * SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY. NOTE: EXTENDED WVDC DOES NOT APPLY TO CDR PRODUCTS. ATC100 B 91 0 VOLT 150 160 180 200 220 EXT VOLTAGE 1500 151 161 181 201 221 VOLT 500 20 22 24 27 30 33 36 39 43 500 47 51 F, G, J, 56 K, M 62 68 75 82 91 100 110 300 120 130 300 EXT B, C, D 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 111 EXTENDED B, C 2.4 2.7 3.0 3.3 3.6 3.9 B, C, D 4.3 4.7 5.1 5.6 6.2 500 6.8 7.5 B, C, J, 8.2 K, M 9.1 10 11 12 13 F, G, J, K, M 15 16 18 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 EXTENDED VOLTAGE EXTENDED VOLTAGE B EXTENDED VOLTAGE 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 EXTENDED VOLTAGE CAP. CAP. RATED WVDC CAP. CAP. RATED WVDC CAP. CAP. RATED WVDC CAP. CAP. RATED WVDC TOL. TOL. TOL. TOL. CODE (pF) STD. EXT. CODE (pF) STD. EXT. CODE (pF) STD. EXT. CODE (pF) STD. EXT. ATC 100 B Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE MIL-PRF55681 BODY DIMENSIONS INCHES (mm) OUTLINES CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) W CDR14BG L P CDR14BG B T .110 +.035 -.010 .110 .015 (2.79 (2.79 0.38) +0.89 -0.25) Heavy Tin / Lead Coated, over Nickel Barrier Termination T .110 +.020 -.010 .110 .015 (2.79 +0.51 (2.79 0.38) -0.25) T .110 .0. 15 020 -.010 .110 .015 (2.79 (2.79 0.38) +0.51 -0.25) W Pellet L Y 100B T N/A B Solderable Nickel Barrier W L Y 100B CA CDR13BG W B Gold Chip L TL LL WL W T L B 100B MS WL 100B AR T RoHS Compliant Gold Plated over Nickel Barrier Termination WL .135 .015 (3.43 0.38) W T L Axial Ribbon B 100B RR W Radial Ribbon 100B RW LL CDR24BG CDR23BG W Width Thickness ( WL ) ( TL ) .250 (6.35) min. .093 .005 (2.36 0.13) .004 .001 (.102 .025) N/A T .102 (2.59) max. LL B Radial Wire T L W LL W WL LL W CDR25BG L Axial Wire .145 .020 (3.68 0.51) T B AW T L L 100B .110 .015 (2.79 0.38) WL TL LL WL L Length ( LL ) TL LL CDR22BG RoHS Compliant Tin Plated over Nickel Barrier Termination .120 (3.05) max. W L Microstrip B .102 (2.59) .015 (0.38) max. .010 (0.25) TL LL CDR21BG MATERIALS T Y 100B OVERLAP (Y) TIn / Lead, Solder Plated over Nickel Barrier Termination W B Solder Plate.1 THICKNESS (T) .110 +.020 -.010 .110 .015 (2.79 +0.51 (2.79 0.38) -0.25) Y 100B WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS T L #26 AWG., .016 (.406) dia. nominal * T LL * * .500 (12.7)in. min. W Additional lead styles available: Narrow Microstrip (NM), Narrow Axial Ribbon (NA) and Vertical Narrow Microstrip (H). Other lead lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. For a complete military catalog, request American Technical Ceramics document ATC 001-818. ** L A M E R I C A N ATC North America sales@atceramics.com 3 LL W * T T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 100 B Non-Magnetic Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE 100B 100B 100B 100B 100B 100B 100B 100B ATC TERM. CODE MIL-PRF55681 WN Meets Requirements W TL LL L WL W T T L OVERLAP (Y) MATERIALS .110 +.025 -.010 .110 .015 (2.79 +0.64 (2.79 0.38) -0.25) TIn / Lead, Solder Plated over Non-Magnetic Barrier Termination .110 +.035 -.010 .110 .015 .102 (2.59) .015 (0.38) (2.79 +0.89 (2.79 0.38) max .010 (0.25) -0.25) Heavy Tin / Lead Coated, over Non-Magnetic Barrier Termination W RoHS Compliant Tin Plated over Non-Magnetic Barrier Termination Length ( LL ) Width Thickness ( WL ) ( TL ) .250 (6.35) min .093 .005 (2.36 0.13) T B TL .135 .015 (3.43 0.38) LL WL W T L B LL W Non-Mag Radial Ribbon THICKNESS (T) .120 (3.05) max. L Non-Mag Axial Ribbon WIDTH (W) TL WL Non-Mag Microstrip LENGTH (L) .110 +.025 -.010 .110 .015 (2.79 +0.64 (2.79 0.38) -0.25 Y LL .110 .015 (2.79 0.38) WL L T TL LL WL B W T L LL .004 .001 (.102 .025) N/A .102 (2.59) max. T Non-Mag Radial Wire L W LL W L B Meets Requirements BN T B Meets Requirements RN W L B Meets Requirements FN Y Non-Mag Solderable Barrier Meets Requirements AN T L Non-Mag Pellet Meets Requirements MN W B Meets Requirements TN Y Non-Mag Solder Plate Meets Requirements PN W/T IS A TERMINATION SURFACE B LEAD AND TERMINATION DIMENSIONS AND MATERIALS BODY DIMENSIONS INCHES (mm) OUTLINES CASE SIZE & TYPE LL W Non-Mag Axial Wire L LL * * T L .500 (12.7) in. min. .145 .020 (3.68 0.51) WL T * #26 AWG., .016 (.406) dia. nominal T W Additional lead styles available: Narrow Microstrip (DN), Narrow Axial Ribbon (GN) and Vertical Narrow Microstrip (HN). Other lead lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions ** L 910J Horizontal Electrode Orientation A B 0.3 to 510 pF > 510 pF Pad Size Normal High Density Normal High Density A M E R I C A N ATC North America sales@atceramics.com All values A Min. B Min. C Min. D Min. .065 .050 .075 .175 .030 .075 .135 .050 .045 .090 .070 Normal .110 Normal .120 High Density High Density C D 4 Case B Vertical Mount 0.2 pF Vertical Electrode Orientation B * T 0.1 pF W 0J 91 T W Cap Value T L W L LL Normal .090 .100 .075 .075 .175 .030 .050 .075 .030 .075 .175 .050 .075 .175 .030 Horizontal Mount High Density .075 .135 .135 .135 .130 .050 .075 .175 .110 .030 .075 .135 T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.a tc er am ic s .c om ESR VS CAPACITANCE ATC SERIES 100, CASE B ESR VS CAPACITANCE ATC 100 B Performance Data ESR VS. CAPACITANCE ATC SERIES 100, CASE B 1 Q VS. CAPACITANCE ATC SERIES 100, CASE B 100000 150 MHz 1000 MHz 0.1 1000 Q ESR (Ohms) 10000 500 MHz 500 MHz 150 MHz 0.01 1000 MHz 100 (Typical) 1 10 (Typical) 10 100 1 ESR VS CAPACITANCE 10 CAPACITANCE (pF)CASE B ATC SERIES 100, (1.0 pF to 51 pF) 100 CAPACITANCE (pF) (1.0 pF to 51 pF) Q VS CAPACITANCE ATC SERIES 100, CASE B CAPACITANCE (1.0 CAPACITANCE pF to 51 pF) ESR VS. ATC SERIES 100, CASE B 1 Q VS. CAPACITANCE ATC SERIES 100, CASE B 1000 Q ESR (Ohms) 150 MHz 1000 MHz Q 0.1 100 500 MHz 500 MHz 150 MHz Q 0.01 1000 MHz (Typical) 10 100 10 1000 (Typical) 10 100 CAPACITANCE (pF) (56 pF to 1000 pF) SERIES RESONANCE VS CAPACITANCE ATC SERIES 100, CASE B CAPACITANCE (56 pF to 1000 pF) SERIES RESONANCE VS. CAPACITANCE ATC SERIES 100, CASE B 2 % CHANGE IN CAPACITANCE FREQUENCY (GHz) 100 10 1 0.1 1 10 CAPACITANCE (pF) A M E R I C A N ATC North America sales@atceramics.com 5 100 1.5 CAPACITANCE CHANGE VS. TEMPERATURE ATC SERIES 100, CASE B CAPACITANCE (pF) TC= +90 20 PPM/C (-55C to +125C) (56 pF to 1000 pF) TC= +90 30 PPM/C (+125C to +175C) 1 0.5 0 -0.5 -1 (Typical) 0.1 1000 CAPACITANCE (pF) (56 pF to 1000 pF) 1000 -55 -35 -15 5 25 45 65 85 105 125 TEMPERATURE (Degrees C) T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com w w w.at c er am ic s .c om 145 165 CURRENT RATING VS CAPACITANCE ATC SERIES 100, CASE B ATC 100 B Performance Data CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE B 10 0.1 The current rating is based on a 65C mounting surface and a device thermal resistance (U) of 20C/W. A power dissipation of 3W will result in a case temperature of 125C. 10 1000 MHz 1 100 RMS CURRENT (Amps) RMS CURRENT (Amps) RMS CURRENT (Amps) 100 CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE B 500 MHz 150 MHz 30 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 0.1 1 10 150 MHz 500 MHz 1000 MHz 30 MHz 1 100 Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 10 100 1000 CAPACITANCE (pF) (56 pF to 1000 pF) CAPACITANCE (pF) (0.1 pF to 51 pF) CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE B, EXTENDED VOLTAGE 100 CAPACITANCE (56 pF to 1000 pF) RMS CURRENT (Amps) 10 1000 MHz 1 500 MHz 150 MHz 30 MHz RMS Current (Amps) 0.1 0.01 Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 0.1 1 10 100 1000 CAPACITANCE (pF) Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1996 American Technical Ceramics Corp. All Rights Reserved ATC # 001-807 Rev. S, 8/18