Commercial and Industrial Product Catalog Page * Trim Trio COMPANY PROFILE SOURIAU is a world-leading supplier of high performance interconnect solutions for severe environments. The company designs, manufactures and markets standard electrical, fiber optic connectors and complex interconnect systems. SOURIAU was established in 1917 and has the industrial, aeronautical, defense and space activities of SOURIAU, JUPITER and BURNDY. The dedicated end markets for the company's products are aerospace, defense, railways and industrial markets. The group's products are engineered and manufactured in USA and Dominican Republic, Europe and Morocco, India and Japan, and sold by a worldwide sales and marketing organization. The group employs 1400 people all over the world. ......................................................................................................................................... 5 * 26482 Series 1 ................................................................................................................... 165 * Push Pull ................................................................................................................................... 197 Trim Trio Laboratory & test center SOURIAU has its own independent test center recognized by many National Standard Laboratories. This center carries-out validation or qualification programs complying with : MILStandard - CECC - GSFC - VDE - SCC -EN - CSA - UL - The laboratory has the capabilities to perform testing in compliance with the above mentioned standards as follow : electrical, environmental, mechanical. Design & Development SOURIAU continues its strong commitment to invest in design and development to provide innovative solutions. Our company is structured into cross functional teams of scientists, engineers and technicians working closely with customers to bring new products to market. More than 6% of our sales are invested in new product development. 26482 Series 1 Quality Assurance Quality is a key objective for SOURIAU focusing on : Total customer satisfaction The widespread application of a Quality Assurance System that spans all processes, is consistent throughout the company and meets the requirements ISO9001 / ISO14001 / MIL-STD790 / NATO AQAP110 / BOEING D1-9001 / AS-9100 Push Pull Souriau reserves the right to make any engineering refinements, alterations or improvements deemed necessary on its products. The dimensions appearing in this catalogue are thus subject to change without notice. When dimensions are critical detailed drawings should be requested. 1 Commercial and Industrial Product Catalog History 1917 Mr SOURIAU creates a small company with about 20 employees based in 5,000 sq. ft building dedicated to repairing automotive magneto's. 1924 Burn DIBNER forms BURNDY Engineering Company and revolutionizes overhead power distribution market with T Connectors and bar taps. 1935 First development and production of SOURIAU electrical connector lines. 1978 BURNDY opens York (PA) facility to produce TRIM-TRIO and stamped and formed terminals. 1989 Acquisition of SOURIAU/JUPITER and BURNDY Corp. by FRAMATOME with creation of FCI. 1998 Creation within FCI of an autonomous Division (MAI) - Military/Aerospace and Industrial integrating: SOURIAU: Aerospace and industrial connectors JUPITER: Marine and heavy industry connectors BURNDY: Industrial TRIM TRIO range and proprietary aerospace connectors 2003 AXA Private Equity together with the Management acquire MAI Division of FCI. Main Dates First Connectors Creation of SOURIAU SOURIAU 1917 Set up European Units 1935 Set up US Subsidiary 1955 Acquisition by FRAMATOME 1977 1989 SOURIAU 2003 JUPITER 1946 Creation of JUPITER 1998 BURNDY 1924 1978 Creation of BURNDY York (PA) facility Creation of Military-Aerospace and Industrial Division (MAI) in FCI. Laboratory & Test Center SOURIAU has its own independent test center recognized by many National Standard Laboratories. This Center carries-out validation or qualification programs complying with : MIL- Standard - CECC - GSFC - VDE - SCC - EN - CSA - UL The laboratory has the capabilities to perform testing in compliance with the above mentioned standards as follows : * electrical * environmental * mechanical Design & Development Quality Assurance MRP II, Class A Quality is a key objective for SOURIAU focusing on : * Total Customer Satisfaction. * The widespread application of a Quality Assurance system that spans all processes, is consistent throughout the company and meets the requirements of ISO 9001/ ISO 14001/MIL-STD 790 /NATO AQAP 110 / BOEING D1-9000 / AS-9100 2 SOURIAU continues its strong commitment to invest in design and development to provide innovative solutions. Our Company is structured into cross-functional teams of scientists, engineers and technicians working closely with customers to bring new products to market. More than 6% of our sales are invested in new product development. Commercial and Industrial Product Catalog Operations An International Presence A local presence in each of our markets with highly trained sales engineers working closely with each customer. Standard-MIL and TRIM-TRIO connectors are available through a worldwide distribution network. SOURIAU Office Distributor Agent/Rep Each Business Unit has full responsibility for design and production of its product lines, providing improved reactivity and commitment to our customers. York plant North America York, PA USA Located in YORK (PA), is dedicated to Aerospace, Industrial and R/F connectors Santiago, Dominican Republic Assembly plant serving the North American market. Europe Dominican Republic plant Sarthe, France Located 120 miles west of Paris, 2 units are responsible for all standard Mil-Aero and Industrial product lines. Champagne plant Tangier, Morocco Assembly plant serving the European market. Marolles en Brie, France Located 20 miles south of Paris this unit is responsible for very severe environment connectors and systems. Morocco plant Japan Tokyo, Japan located in Tokyo, is responsible for industrial products, particularly for railways Marolles plant and machine Tokyo office 3 tool markets. 4 TRIM TRIOTM Connectors 5 Commercial and Industrial Product Catalog Page * Overview 9 * Circular connectors Circular overview .................................................................................................................................... 15 Full plastic sealed connectors - UTS ................................................................................................19 Full plastic circular connector - UTP ............................................................................................... 31 Plastic connector with metal coupling system - UTG ...............................................................35 Metal circular connector - UTO..........................................................................................................39 Metal circular connector - high density - UTOW .........................................................................45 Shielded connectors... how to assemble ....................................................................................... 51 Ruggedized Reverse Bayonet Connector .......................................................................................53 Mixed power signal versions etc... ...................................................................................................69 Circular accessories ...............................................................................................................................75 High mating cycle plastic circular connector - MBG ..................................................................83 * Rectangular connectors High performance cable connectors - MSM .................................................................................89 High performance boardmount connectors - MSO ...................................................................95 V.35 - DTE/DCE interface connectors ......................................................................................... 101 Low profile lever locking connectors - MSG ............................................................................. 107 Robust lever locking connectors - MB .........................................................................................113 Full plastic cable and boardmount connectors - SMS ............................................................115 Mixed power signal versions etc... ................................................................................................131 * Contacts Machined size 16 contacts - RM/RC-M ...................................................................................... 137 Stamped and formed size 16 contacts - SM/SC-M .................................................................141 Coax size 16 contacts - RMDX/RCDX ..........................................................................................147 Fibre optic size 16 contacts - 8012 .............................................................................................. 150 Size 20 contacts for UTOW/UTS ................................................................................................... 152 Power contacts - 8291 ...................................................................................................................... 154 * Accessories Discrimination keys for size 16 connectors................................................................................ 156 * Tooling Crimp and extraction tooling ........................................................................................................... 158 6 New UT0-UT0W series New UT0 - UT0W series: * The exclusive new product range in the TRIM TRIO broadline. * Aesthetic and top class performances UT0 - UT0W series major technical features & benefits * Full metal bayonet connector - Enabling 500 mating-unmating without wear out - Secure locking device: audible "click" when mating * Dynamic IP68* * Dynamic IP69K* Connector will remain IP68 even when: - Pulling on the cable - Bending the cable Connector withstands high pressure water cleaning. * With appropriate back shell * Exists also in IP67 version * With appropriate back shell * High salt spray resistance* - Can be used in severe environment * Exists in 48 and 96 hours salt spray version * Higher salt spray resistance (e.g. 200 or 500 hours) upon request * RoHS compliant - Cadmium and lead free materials are used * In accordance with following standards - UT0 is Ethernet Cat5e compatible (consult factory) - UTO-UTOW ranges are upgradeable to highspeed solutions For detailed information on UT0 and UT0W series offering see pages 21 to 31 7 New UTV ruggedized series New UTV series: * The ruggedized product range in the TRIM TRIO broadline. * Using size 16 signal and size 12 & 8 power contacts for up to 30 Amps per contact. UTV series major technical features & benefits * Ruggedized full metal reverse bayonet connector - Enabling 500 mating-unmating without wear out - Secure locking device Audible "click" when mating Visible yellow dot to indicate end of mating cycle * Dynamic IP68* * Dynamic IP69K* Connector will remain IP68 even when: - Pulling on the cable - Bending the cable Connector withstands high pressure water cleaning. * With appropriate back shell and grommet * Exists also in IP67 version * With appropriate back shell and grommet * Up to 500 hours salt spray resistance - Can be used in very severe environment * Cadmium and lead free materials are used * In accordance with following standards - Completely intermountable with VG95234: the MS5015 reverse bayonet connectors For detailed information on UTV series offering see pages 122 to 139 8 TRIM TRIOTM Overview TRIM TRIO The flagship of Souriau's industrial connectors Historically, TRIM TRIO connectors were developed in the 60's and are derived from MIL standards, but using size 16 contacts (1.6mm). From the 60's and forward, the product ranges have evolved into various sub series and different design-variations. In parallel with the size 16 contacts, there also has been an evolution on high density versions using size 20 contacts (1.0mm) and on mixed signal / power versions using size 16 contacts in combination with size 12 (2.4mm) and size 8 (3.6)mm contacts. This TRIM TRIO interconnection system catalog gives an overview of the following products: * Standard TRIM TRIO using size 16 contacts (1.6mm) * High Density TRIM TRIO using size 20 contacts (1.0mm) * Mixed power / signal versions and Heavy Duty connectors * High Density TRIM TRIO Using size 20 contacts Standard TRIM TRIO using size 16 contacts (1.6mm pin diameter) is a versatile industrial range of connectors in which a variety of 3 removable snap-lock contact styles can be mixed and matched. From machined or stamped & formed wire contacts to coaxial or fiber solutions can be offered with our TRIO of contact styles. In fact, the beauty of the standard TRIM TRIO system means that any TRIM TRIO contact can be used in any contact position in any TRIM TRIO connector. The versatile range offers many options in rectangular and circular connectors from low cost plastic to top class metal solutions. This interchangeability offers boundless design possibilities with a large commonality throughout the entire range. High Density TRIM TRIO (UT0W/UTS) using size 20 contacts (1.0mm pin diameter) are metal circular ranges with bayonet coupling system in which a variety of 2 removable snaplock contact styles are used. Both machined or stamped & formed contacts can be mixed and matched in the same housing. UTOW receptacle connectors feature the same panel cut-out dimensions as the MIL-C-26482 series 1 connectors. The commonality in the system is established in: * Contact performance and wire range. * Configuration of contact cavities in the housings. * Crimp tooling * Assembly procedures. * Quality assurance procedures. * Field service and maintenance. * Personnel training. There are 3 basic reasons for a customer to use UT0W/UTS connectors. * Higher contact density: allows weight and space savings * The "best in class" performance characteristics with an IP68/ 69K waterproof bayonet connection * Standard TRIM TRIO Using size 16 contacts * Mixed Power / Signal TRIM TRIO * Ruggedized TRIM TRIO connectors UTV Mixed Power / Signal TRIM TRIO connectors using mixed contacts for power versions up till 44 Amp is a range of connectors to meet application specific requirements. It is an extension of the long established and popular TRIM TRIO connectors offering additional features. Ruggedized UTV circular connectors series is an enhanced version of the VG 95234 connector standard but remains completely intermountable with VG 95234: the MS 5015 reverse bayonet system. Following TRIM TRIO contacts are used in the UTV series: * Size 16 contacts (1.6mm) * Size 12 contacts (2.4mm) * Size 8 contacts (3.6mm) * Cost saving!!! Not only on individual connector cost, but UT0W/UTS offers reeled, stamped & formed contacts that provide the ultimate answer to customers for overall applied cost for installation. The keyword in the TRIM TRIO interconnection system is SERV: * Standardization * Economy. * Reliability * Versatility This word explain why the TRIM TRIO name is so well known, and its connectors are used all over the world. The physical characteristics and performances are appreciated in numerous fields of applications: * Test and measurement * Robotics * Process control, handling equipment * Factory automation and motor drives * Public transportation, traffic control * Medical instrumentation, telecom * ... etc More then ever before, businesses are relying on robust and environmental TRIM TRIO solutions to help them being successful. The flagship TRIM TRIO has an international presence with engineering; customer service and a worldwide distribution network. It is supported by highly trained sales engineers working closely with each customer. Our emphasis includes customer satisfaction and `just-in-time' to ensure fast delivery to our key customers. TRIM TRIO continues its strong commitment to invest in design and development. We provide new solutions to perform faster, easier, safer and more reliably. 9 Overview - Circular size 16 FULL PLASTIC CIRCULAR CONNECTOR PLASTIC CONNECTOR WITH METAL COUPLING METAL CIRCULAR CONNECTOR Description Full plastic circular connector with rugged plastic bayonet coupling system Description Plastic circular connector with metal bayonet coupling system Description Metal circular connector with metal bayonet coupling system Range Shell sizes: Contact arrangements: Range Shell sizes: Contact arrangements: Range Shell sizes: Contact arrangements: 8 10 (3 to 48) 8 11 (3 to 48) Features Derived from MIL - C 26482 Intermateable with UTO / UTG IP65 (waterprotected version) Min 250 matings/unmatings 2 VDE versions Features Derived from MIL - C 26482 Intermateable with UTO / UTP IP65 (waterprotected version) Min 500 matings/unmatings 3 VDE versions Accessories Different type of cable clamps Dustcaps Discrimination pins Accessories Different types of cable clamps Dustcaps Discrimination pins PLASTIC SEALED CONNECTOR Description Plastic circular connector with metal quick mating feature (push-pull) Range Shell sizes: Contact arrangements: 5 5 (4 to 46) Features Min 5000 matings/unmatings Quick and easy mating with latching system Accessories Cable clamp Description Plastic circular connector with environmental sealing Range Shell Size: Contact arrangements: 3 9 (3 to19) Features Sealed to IP 68/69K Min 250 mating/unmatings Jamnut receptacle for efficient panel seal RoHS compliant Accessories Color coded rings for cable identification Sealing caps 10 8 8 (4 to 48) Features (see also page 2) Derived from MIL - C 26482 Intermateable with UTG / UTP 2 levels of water protection: Dynamic IP67/IP69K and IP68/IP69K Suitable for EMC requirements Min 500 matings/unmatings 2 levels of salt spray: 48 and 96h Higher salt spray (200/500h) upon request Cat5e ethernet compatible Back shells with metric cable glands RoHS compliant new HIGH MATING CYCLE CONNECTOR new Accessories Different types of cable clamps Shielded cable clamp Dustcaps Discrimination pins Overview - Rectangular size 16 HIGH PERFORMANCE CABLE CONNECTOR HIGH PERFORMANCE BOARDMOUNT CONNECTOR V35 - DTE/DCE Description High performance rectangular cable connector Description Rectangular boardmount connector to mate with MS-M cable connectors Description Rectangular cable and boardmount connector for V.35 DTE/DCE interface applications Range Shell sizes: Contact arrangements: Range 1 shell size with 34 contact positions straight and right angle boardmount connector Range Shell sizes: Contact arrangements: 9 9 to 75 Features Per MIL - C 28748 Intermateable with MSO 5 5 straight (9 to 75) 3 right angle (9,18,34) Features Solid machined or stamped and formed contacts Intermateable with MS-M Accessories Different types of cable clamps Guide and jackscrew pins Pin protection shrouds Discrimination pins Accessories Guide and jackscrew pins Discrimination pins Features In compliance with international standards of ISO 2593 for TSS V.35 interfacing Solid machined or stamped and formed contacts for boardmount connector Shielded cable and boardmount connectors available Accessories Different type of cable clamps (incl. shielded) Guide and jackscrew pins Pin protection shrouds and discrimination pins new COMPOSITE LEVER-LOCKING CONNECTOR PLASTIC PANEL AND CABLE CONNECTOR PLASTIC PC BOARDMOUNT CONNECTOR Description Cable (MSG + MB) and boardmount (MSG) connectors with lever locking system. Description Low cost rectangular cable connectors for cable to cable and cable to panel applications Description Low cost rectangular boardmount connector to mate with SMS cable connectors Range Shell sizes: Range Shell sizes: Contact arrangements: Range Shell sizes: Contact arrangements: Contact arrangements: 1 for MSG 1 for MB 50 + 59 for MSG 52 for MB Features Lever locking system - easy mating MSG is 19" rack mountable Polarization features available Anti jack knife system on MB 10 10 (2 to 36) Features Intermateable with SMS Boardmount Moulded-on cable hood No extra hardware required Positive locking with retaining latches Disrrimination cavities in between contact cavities Accessories Pin protection shrouds Discrimination pins Tie wraps 11 10 10 straight (2 to 36) 4 right angle (3,6,12,18) Features Solid machined or stamped and formed contacts No extra hardware required Intermateable with SMS cable connectors Disrrimination cavities in between contact cavities Accessories Discrimination pins Overview - Contacts size 16 SCREW MACHINED (size 16) STAMPED & FORMED (size 16) COAXIAL (size 16) Description Machined Snap in pin and socket contacts for heavy duty top performance requirements. Description Two piece strip formed snap in pin and socket contacts. Description Snap in pin and socket coaxial contacts for a wide range of coaxial and twisted pair cables. Range 30 to 14 AWG - 0.05 to 2.5 mm2 Crimp, PC Boardmount, Handsolder Wire wrap, Grounding contacts Range 26 to 14 AWG - 0.13 to 2.0 mm2 Crimp. Range Multi piece or Monocrimp design. Typical coaxial cables are: RG161, RG178, RG179. RG188. Features Current rating: 13 Amps Plating: Gold or Tin Colour coded for different wire sizes Features Current rating: 13 Amps Plating: Gold or Tin Features Plating: Gold Fiber optic (size 16) Description Snap in pin and socket Fiber optic contacts for the integration of optical links. Range Plastic optical Fiber (POF): 1mm core and 2.2mm jacket. Plastic clad Fiber (PCF): 230 m core and 2.2 mm jacket Multimode Silica Fiber: 50/125 m type 1.5mm (or 900 m) jacket. Features Socket contact is spring loaded to avoid any air gap between the optical faces. 12 Overview - size 20 connectors + contacts METAL CIRCULAR CONNECTOR PLASTIC SEALED CONNECTOR new Description Metal circular connector with metal bayonet coupling system. Range Shell sizes: Contact arrangements: 8 8 (6 to 61) Features (see also page 2) 2 levels of water protection: Dynamic IP67/IP69K and IP68/IP69K Suitable for EMC requirements Min 500 matings/unmatings 2 levels of salt spray: 48 and 96h Higher salt spray (200/500h) upon request Back shells with metric cable glands RoHS compliant Accessories Different types of cable clamps Shielded cable clamp Dustcaps Discrimination pins Description Plastic circular connector with environmental sealing Range Shell Size: Contact arrangements: 3 9 (3 to19) Features Sealed to IP 68/69K Min 250 mating/unmatings Jamnut receptacle for efficient panel seal RoHS compliant Accessories Color coded rings for cable identification Sealing caps SCREW MACHINED CONTACTS (size 20) STAMPED AND FORMED CONTACTS (size 20) Description Machined Snap in pin and socket contacts for heavy duty top performance requirements. Description Two piece strip formed snap in pin and socket contacts. Range 26 to 18 AWG - 0.13 to 1.0 mm2 Crimp and PC Boardmount Range 26 to 20 AWG - 0.13 to 0.5 mm2 Crimp. Features Current rating: 7.5 Amps Plating: Gold Features Current rating: 5 Amps Plating: Gold 13 Overview - mixed power signal/ruggedized MIXED POWER AND SIGNAL UTV SERIES Description Power connectors are connectors to meet mixed power / signal requirements. This range of power connectors is an extension of the long established and popular TRIM TRIO connector series Description Ruggedized metal circular connector for heavy duty applications new Range Shell sizes: Contacts arrangements: 8 9 (7 to 60) Features Completely intermountable with VG95237: the MS5015 reverse bayonet connectors. 2 levels of waterprotection: Dynamic IP67/69K and IP68/69K Up to 500 h salt spray. Accessories Straight back shells Right angle back shells Grommets and filler plugs POWER CONTACTS Description Machined snap in pin and sockets contacts for power applications Range Size 12 contacts: 20 to 14 AWG - 0.5 to 2.5 mm2 Size 8 contacts: 16 to 8 AWG - 1.5 to 10 mm2 Features Current rating: 26 Amps for size 12 contacts 44 Amps for size 8 contacts Plating: Gold or Silver for size 12 contacts Gold for size 8 contacts 14 Circular Overview Circular TRIM TRIO connectors Circular TRIM TRIO connectors are a wide and versatile range that are offered in many options from low cost plastic to top class metal solutions. This section gives an overview on available circular connectors for: 1. Bayonet connectors derived from MIL-C-26482 series 1 but using size 16 contacts (1.6mm). - UTP - Full plastic version. - UTG - Plastic connector with metal bayonet coupling system. - UT0 - Metal circular connector offering top class performance characteristics. 2. High density bayonet connectors using size 20 contacts (1.0mm). - UT0W - Metal circular connector offering top class performance characteristics. 3. Mixed power / signal connectors. - A range of connectors with contact arrangements offered with a mix of signal and power contacts up to 44 A. 4. Push-pull connectors using size 16 contacts (1.6mm). - MBG - Plastic connector with metal quick mating feature. 15 Circular - Overview TRIM TRIO Insert arrangements and moulded-in contact identification ~ Viewed from front face of male connector ~ Shell size Contact # 16 (O 1,6) Contact # 20 (O 1,0) VDE versions Mixed power / signal versions 10 10-4 10-3 VDE 3 x #16 (O 1,6) Group C 250V 10-6 10-3W3 3 x # 16 (O 1,6) 3 x # 20 (O 1,0) 12 12-8 12-3 3 x #12 (O 2,4) 12-10 14 14-12 14-19 14-8 4 x # 12 (O 2,4) 4 x # 16 (O 1,6) 16 16-19 16-26 18 18-23 18-7 VDE Group C 380V 7 x # 16 (O 1,6) 18-32 16 18-7 2 x #12 (O 2,4) 5 x # 16 (O 1,6) Circular - Overview Shell size Contact # 16 (O 1,6) VDE versions Mixed power / signal versions Contact # 20 (O 1,0) 20 20-28 20-41 20-20 VDE 20 x # 16 (O 1,6) Group C 660V 22 22-35 22-55 24 24-48 24-61 24-7 7 x # 8 (O 3,6) 2 x # 16 (O 1,6) UTP UTG UT0 + Ethernet cat 5e UT0W Contact identification positions shown are for mating face of pin contact connectors and wire face of socket contact connectors. 17 24-11 4 x # 8 (O 3,6) 7 x # 16 (O 1,6) Circular Notes 18 Full Plastic Sealed Connectors Description IP68 / IP69K plastic circular connector with rapid locking system "UTS" is the latest addition to the well known TRIM TRIO(R) interconnect system. `UTS' is a range of Industrial circular multiway connectors available in 3 shell sizes and 9 contact arrangements. The keywords for the new UTS are: Rapid - Secure - High performance Rapid refers to the bayonet coupling system and the total installed cost starting with the rapid wiring & cabling and ending with easy integration into the customer's equipment. Rapid also refers to the total service on price request, samples and production deliveries. The bayonet coupling system together with the secure and versatile TRIM TRIO(R) contacts offer confidence and reliability to both the connection and the customer's equipment. Moreover, UTS is part of the well known TRIM TRIO(R) interconnect system with its more than 40 years of field experience. Extreme performance against water ingress, even in dynamic situations. This, in combination with a rapid and secure bayonet locking system makes UTS suitable for any high performance application. UTS provides a connection that is faster, easier, safer and more reliable. It makes : 19 Full Plastic Sealed Connectors Rapid and secure locking system Ultimate environmental protection in demanding applicationsReduced operator fatiBayonet coupling system ensures proper mating Easy to connect in difficult places Reduced operator fatigue Labor savings Ergonomic plug design with maximized cabling space and minimized connector length Easy grip bayonet coupling ring to allow quick and secure mating Colored rings available for visual identification (See accessories page 15) O-ring seal to guarantee sealing between plug and backshell 20 Full Plastic Sealed Connectors Rapid and secure panel mounting Captive panel seal to prevent misalignment Rear panel mount solution suitable for pre-harnessing and PCB mounting Robust jam nut to guarantee a rapid, secure and vibration proof panel mounting D-shape panel cut to ensure correct mounting and to prevent the connector from rotating O-ring seal to guarantee sealing between receptacle and plug Assembly procedure of jam nut receptacle Step 1 Step 3 Step 2 PCB receptacle...low profile with rapid installation features Low profile housing to limit space between panel and PCB Metal hold down clips to lock the connector easily on the PCB and to release stress on solder joints Pre-assembled PCB contacts - machined or stamped versions available - different solder tails lengths possible - different plating options Stand-offs to allow cleaning after soldering 21 Full Plastic Sealed Connectors Extreme environmental sealing performance IP68 / IP69K sealing ... even in dynamic situations Dynamic IP68* Connector will remain IP68 even when: l Pulling on the cable l Bending the cable Dynamic IP69K* Connector withstands high pressure water cleaning * See table page 16 for more details 22 Full Plastic Sealed Connectors Multiple contact arrangements with VDE 0110 performances Multiple contact arrangements within same connector size l l l Different levels of current and rated voltages per VDE 0110 Available in male and female genders Custom version available upon request such as: - Mixed contact sizes - Power versions - High speed versions (RJ45, USB, BNC) UTS insert arrangements, contact size, rated voltage per VDE 0110 & current ratings Contact size # 16 (dia. 1.6mm) #20 (dia. 1.0mm) Rated voltage 250 V 125 V 125 V Overvoltage category III III III Pollution degree 3 3 3 Number of contacts 3 (2+ grounding) 4 6 Max current (per contact) 13A (machined + stamped) 13A (machine + stamped) 7.5A (machnied) / 5A (stamped) Number of contacts 4 (3 + grounding) 8 10 Max current (per contact) 13A (machined + stamped) 13A (machine + stamped) 7.5A (machined)/ 5A (stamped) Size 10 Size 12 Size 14 Number of contacts 7 (6 + grounding) 12 19 Max current (per contact) 13A (machined + stamped) 13A (machined + stamped) 7.5A (machined)/ 5A (stamped) 23 Full Plastic Sealed Connectors Rapid and secure panel mounting Captive panel seal to prevent misalignment Rear panel mount solution suitable for pre-harnessing and PCB mounting Robust jam nut to guarantee a rapid, secure and vibration proof panel mounting D-shape panel cut to ensure correct mounting and to prevent the connector from rotating O-ring seal to guarantee sealing between receptacle and plug Assembly procedure of jam nut receptacle Step 1 Step 3 Step 2 PCB receptacle...low profile with rapid installation features Low profile housing to limit space between panel and PCB Metal hold down clips to lock the connector easily on the PCB and to release stress on solder joints Pre-assembled PCB contacts - machined or stamped versions available - different solder tails lengths possible - different plating options Stand-offs to allow cleaning after soldering 24 Full Plastic Sealed Connectors Technical characteristics MECHANICAL l Durability: l Vibration resistance: l Thermal shock: 250 matings & unmatings Per CEI 60512-4 Per MIL-STD1344 method 1003 ELECTRICAL l Insulation resistance: 5000 M min l Test potential: 2000 VAC l As per VDE specifications (see page 8 for more details) ENVIRONMENTAL l Operating temp: l Flammability rating: l Sealing (mated): l l UV resistant Salt spray: -40C to + 105C UL94V0 and NFF16101 level 2 Dynamic IP68 - 10m under water for 1 week per IEC60529 Dynamic IP69K per DIN40050 500 hours MATERIAL l Connectors + Backshell: Thermoplastic PLATING (only for PCB version) l Plating for machined contacts: l Plating for stamped contacts: min 0.4 gold all over Min 0.4 gold in contact area 3 - 5 tin on solder tail Other platings upon request CONTACT ACCOMMODATION l "UTS" connectors accept TRIM TRIO(R) size 16 or size 20 (depending on arrangement) removable snap-lock contacts l Refer to TRIM TRIO(R) catalog for details l Contacts to be ordered separately (except PCB versions) In accordance with UL requirements 25 Full Plastic Sealed Connectors Cable plug with backshell for pin and socket contacts UTS6JC...P / UTS6JC...S) Each plug has 2 seals to cover the specified cable range (See table below). The standard seal is preassembled The second seal is supplied as loose piece togoether with a plug. PN for pin contact PN for socket NB contacts UTS6JC103P UTS6JC103S 3 UTS6JC104P UTS6JC104S 4 UTS6JC106P UTS6JC106S 6 UTS6JC124P UTS6JC124S 4 UTS6JC128P UTS6JC128S 8 UTS6JC1210P UTS6JC1210S 10 UTS6JC147P UTS6JC147S 7 UTS6JC1412P UTS6JC1412S 12 UTS6JC1419P UTS6JC1419S 19 Shell size L OA O Cable range 10 63.2 26.2 1.5 to 5.0 2.5 to 8.00 (standard) 12 66.7 29.7 3.0 to 9.0 5.0 to 12.0 (standard) 14 71.5 34.6 5.0 to 12.0 7.0 to 14.0 (standard) Color coding ring is optional (See page 15). Notes : All dimensions are in mm. Dimensions are not contractual and may be subject to modifications. 26 Full Plastic Sealed Connectors Jam nut receptacle (wire version) for pin and socket contacts (UTS7...P / UTS7...S) MATING FACE PANEL CUT OUT PN for pin contact PN for socket NB contacts UTS7103P UTS7103S 3 UTS7104P UTS7104S 4 UTS7106P UTS7106S 6 UTS7124P UTS7124S 4 UTS7128P UTS7128S 8 UTS71210P UTS71210S 10 UTS7147P UTS7147S 7 UTS71412P UTS71412S 12 UTS71419P UTS71419S 19 Shell size O A B D Max F Max G H K L OM 10 14.9 19.3 33.9 3.2 27.0 22.2 16.6 16.5 17.7 12 19.0 19.3 33.9 3.2 31.8 27.0 20.8 21.2 22.5 14 22.2 19.3 33.9 3.2 34.9 30.2 23.9 24.3 25.7 Color coding ring is optional (See page 15). Notes : All dimensions are in mm Dimensions are not contractual and may be subject to modifications. 27 Full Plastic Sealed Connectors PCB jam nut receptacle for male contacts UTS714PSE4K9 MATING FACE G0.25 F max H0.3 +2 O A0.15 E-2 B0.2 J0.2 C0.2 D Max DRILLING PATTERN PANEL CUT OUT Shell size OA B C D Max E F G H J L OM 14 22.2 19.3 3 24.5 3.6 3.2 34.9 30.2 4 24.3 25.7 Other arrangements upon request. Stamped and formed contacts. Plating: K9 (std) = Min 0.4 Gold in contact area, 3 - 5 Tin on solder tail T = 3 - 5 Tin all over Notes : All dimensions are in mm. Dimensions are not contractual and may be subject to modifications. 28 Full Plastic Sealed Connectors Accessories Receptacle sealing cap Plug sealing cap Part numbers Size 10: UTS10DCG Size 12: UTS12DCG Size 14: UTS14DCG Part numbers Size 10: UTS610DCG Size 12: UTS612DCG Size 14: UTS614DCG Color coding rings Part numbers for receptacle Size 10: UTS710CCR* Size 12: UTS712CCR* Size 14: UTS714CCR* * Add G for Green, Y for Yellow, R for Red Part numbers for receptacle Size 10: UTS610CCR* Size 12: UTS612CCR* Size14: UTS614CCR* * Add G for Green, Y for Yellow, R for Red 29 Full Plastic Sealed Connectors What is sealing and how it is specified l The connector's housing, sealing and locking mechanism protect the connection from external influences such as mechanical shocks, foreign bodies, humidity, dust, water and other fluids. l The degree of protection is explained in IEC 60529, DIN EN60529 (DIN 40050) standards that categorize connections according to foreign body and water protection. l The degree of protection is indicated by IP (International Protection) followed by 2 digits (See example below): First index figure (foreign bodies protection) Code letters (International Protection) First Index IP 6 8 Degree of protection Second Index 0 No protection against accidental contact. No protection against solid foreign bodies. 0 1 Protection against contacts with any large area by hand and against large solid foreign bodies with a diameter bigger than 50mm. 1 2 Protection against contacts with the fingers. Protection against solid foreign bodies with a diameter bigger than 12mm. 2 3 Protection against tools, wires or similar objects with a diameter bigger than 2.5mm.. Protection against small solid bodies with a diameter bigger than 2.5mm. 4 5 6 3 As 3 however diameter is bigger than 1mm. Full protection against contacts. Protection against interior injurious dust deposits. Total protection against contacts. Protection against penetration of dust. UTS offers high sealing performance IP68 / IP69K... Even in dynamic situations. Second index figure (water protection) Degree of protection No protection against water. Drip-proof. Protection against vertical water drips. Drip-proof. Protection against water drips up to a 15 angle. Spray-proof. Protection against diagonal water drips up to a 60 angle. 4 Splash-proof. Protection against splashed water from all directions. 5 Hose-proof. Protection against water (out of a nozzle) from all directions. 6 Protection against temporary flooding. 7 Protection against temporary immersions. 8 Protection against water pressure. Pressure to be specified by supplier. 9K High pressure hose-proof. Protection against high pressure water (out of a nozzle) from all directions. SOURIAU reserves the right to make any engineering refinments, alterations or improvements deemed necessary on its products. The dimensions appearing in this catalogue are thus subject to change without notice. When dimensions are critical detailed drawings should be requested. 30 Full Plastic Circular Connector UTP SERIES Description "UTP" full plastic industrial circular connectors are a range of multiway connectors. "UTP" provides the complete answer to the need for economical lightweight, robust circular connectors and is unique in offering a plastic bayonet coupling ring incorporating a metal wave spring, which locks with an audible positive "click". It is available in 8 shell sizes, 10 insert arrangements all intermateable, interchangeable and intermountable with the TRIM TRIO "UT0" (full metal) and "UTG" (plastic with metal coupling ring) industrial connector families. Features and benefits * Available in 8 shell sizes and 10 insert arrangements incl. 2 VDE versions. * Available in plug and receptacle versions for both male and female contacts. * Connectors and accessories are moulded from highly durable glass-filled thermoplastic. * Flammability rating: UL94-V0. * Plastic bayonet ring: - Vibration proof thermoplast - Metal wave spring loaded. - Locks with audible positive "click" - UL recognized File Nr.: E238675 Performance characteristics Construction Operating temperature: Insulation resistance: Test potential: Durability: Connector, Bayonet ring and accessories Gass filled thermoplast UL94-V0 Colour: black Coupling spring: Spring steel -55C to +125C 5000 M min. 2000 VAC 250 matings and unmatings. Degree of protection per DIN 40050: IP65 in mated condition. "H" version used with water protected backshells. Contact accommodation * "UTP" connectors accept TRIM TRIO size 16 removable snap-lock contacts (see contacts section) * Contacts to be ordered seperately. How to order Connector family : Body variation: UTP UTP 0 6 0 : Wall mounting receptacle 6 : Cable plug Shell size: Insert arrangement: Type of contacts: P : Pin contacts S : Socket contacts Application No letter : Standard version H : Water protected version (only receptacle) Design variation No letter : Moulded-in contact marking (standard version) Others : Specials versions 31 14 14 12 12 P S H --- Full Plastic Circular Connector Cable plug for pin contacts (UTP6- - - -P) Part number UTP6104P / UTP6103PVDE UTP6128P UTP61412P UTP61619P UTP61823P / UTP6187PVDEU UTP62028P UTP62235P UTP62448P Shell size 10 12 14 16 18 20 22 24 OA 0.2 26.7 31.4 34.5 37.8 40.8 43.9 47.0 50.1 B max. 31.8 31.8 / 33.0 31.8 OC 0.15 10.9 13.8 17.0 19.9 22.4 25.6 28.5 31.7 OD 0.15 12.2 15.1 18.3 21.5 24.0 27.2 30.4 33.5 OE 0.2 19.1 Part numbers are suitable for both standard and IP65 water protection versions. Cable plug for socket contacts (UTP6- - - -S) Part number UTP6104S / UTP6103SVDE UTP6128S UTP61412S UTP61619S UTP61823S / UTP6187SVDEU UTP62028S UTP62235S UTP62448S Shell size O A 0.2 B max. 10 12 14 16 18 20 22 24 26.7 31.4 34.5 37.8 40.8 43.9 47.0 50.1 23.9 / 26.75 Part numbers are suitable for both standard and IP65 water protection versions. 32 23.9 23.9 / 29.0 24.9 26.2 OC 0.15 10.9 13.8 17.0 19.9 22.4 25.6 28.5 31.7 OD 0.15 12.2 15.1 18.3 21.5 24.0 27.2 30.4 33.5 OE 0.2 19.1 Full Plastic Circular Connector Wall mounting receptacle for pin contacts (UTP0- - - -P) Part number Shell size A max. B 0.15 C 0.2 OD 0.15 E 0.25 F *0.25 OG 0.1 UTP0104P / UTP0103PVDE 10 15.0 18.3 23.8 UTP0128P 12 2.3 19.0 20.6 26.2 UTP01412P 14 31.7 11.3 22.2 23.0 28.6 UTP01619P 16 25.3 24.6 31.0 3.2 UTP01823P / UTP0187PVDEU 18 31.7/34.0 2.5 11.3/17.9 28.5 27.0 33.3 UTP02028P 20 14.5 31.7 29.4 36.5 UTP02235P 22 33.3 3.5 34.9 31.8 39.7 UTP02448P 24 15.3 38.0 34.9 42.9 3.9 For IP65 waterprotected version add "H" behind "P" e.g. UTP01412PH A square flange sealing has to be ordered separately to guarantee a sealing with the equipment. Refer to "Circular accessories" section OJ 0.1 15.1 18.2 21.4 24.6 27.8 30.9 34.1 37.3 (UTFD--). Wall mounting receptacle for socket contacts (UTP0- - - -S) Part number UTP0104S / UTP0103SVDE UTP0128S UTP01412S UTP01619S UTP01823S / UTP0187SVDEU UTP02028S UTP02235S UTP02448S Shell size A max. 10 12 14 16 18 20 22 24 24.3/27.6 B 0.15 C 0.2 2.3 24.3 24.3/30.4 27.0 28.0 30.4 11.3 2.5 11.3/17.9 14.5 3.5 15.3 OD 0.15 E 0.25 F *0.25 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 18.3 20.6 23.0 24.6 27.0 29.4 31.8 34.9 23.8 26.2 28.6 31.0 33.3 36.5 39.7 42.9 OG 0.1 3.2 3.9 OJ 0.1 15.1 18.2 21.4 24.6 27.8 30.9 34.1 37.3 For IP65 waterprotected version add "H" behind "S" e.g. UTP01412SH A square flange sealing has to be ordered separately to guarantee a sealing with the equipment. Refer to "Circular accessories" section (UTFD--). 33 Full Plastic Circular Connector Notes 34 Plastic Connector with Metal Coupling UTG SERIES Description "UTG" Metalok Bantam plastic industrial circular connectors with metal coupling are a range of multiway connectors to provide the complete answer to the need for leightweight, robust circular connectors. They are available in 8 shell sizes, 11 insert arrangements all intermateable, interchangeable and intermountable with the TRIM TRIO "UT0" and "UTP industrial connector families. Features and benefits * Available in 8 shell sizes and 11 insert arrangements incl. 3 VDE versions. * Available in plug and receptacle versions for both male and female contacts. * Connectors and accessories are moulded from highly durable glass-filled thermoplastic. * Flammability rating: UL94-V0. * Metal bayonet ring: * - Metal wave spring loaded. * - Locks with audible positive "click" * - Assures 500 matings and unmatings - UL recognized file Nr.: E238675 Performance characteristics Construction Operating temperature: Insulation resistance: Test potential: Durability: Connector body Glass filled thermoplast UL94-V0 Colour: black Coupling ring: Nickel plated brass Tri-lock pins: Stainless steel Coupling spring: Spring steel -55C to +125C 5000 M min. 2000 VAC Up to 1000 matings and unmatings. Vibration Per MIL-STD202 resistance: method 204 Thermal Per MIL-STD202 shock: method 207 Degree of protection per DIN 40050: IP65 in mated condition. "H" version used with waterprotected backshells. Contact accommodation * "UTG" connectors accept TRIM TRIO size 16 removable snap-lock contacts (see contact section) * Contacts to be ordered seperately. How to order Connector family : Body variation: UTG UTG 0 6 14 14 0 : Wall mounting receptacle 6 : Cable plug 1 : Free hanging receptacle Shell size: Insert arrangement: Type of contacts: P : Pin contacts S : Socket contacts Plating N : Nickelplated bayonet ring Application No letter : Standard version H : Water protected version (only receptacle) Design variation No letter : Moulded-in contact marking (standard version) Others : Specials versions 35 12 12 P S H N --- Plastic Connector with Metal Coupling Cable plug for pin contacts (UTG6- - - -PN) Part number UTG6104PN / UTG6103PNVDE UTG6128PN UTG61412PN UTG61619PN UTG61823PN / UTG6187PNVDEU UTG62028PN / UTG62020PN UTG62235PN UTG62448PN Shell size OA 0.2 21.6 24.8 28.0 31.2 34.3 37.5 40.7 43.9 10 12 14 16 18 20 22 24 B max. 31.8 31.8 / 33.0 31.8 / 35.3 31.8 OC 0.15 10.9 13.8 17.0 19.9 22.4 25.6 26.5 31.7 OD 0.15 12.2 15.1 18.3 21.5 24.0 27.2 30.4 33.5 E 0.2 19.1 Part numbers are suitable for both standard and IP65 water protection versions. Cable plug for socket contacts (UTG6- - - -SN) Part number UTG6104SN / UTG6103SNVDE UTG6128SN UTG61412SN UTG61619SN UTG61823SN / UTG6187SNVDEU UTG62028SN / UTG62020SN UTG62235SN UTG62448SN Shell size 10 12 14 16 18 20 22 24 OA 0.2 21.6 24.8 28.0 31.2 34.3 37.5 40.7 43.9 Part numbers are suitable for both standard and IP65 water protection versions. 36 B max. 23.9 / 26.75 23.9 23.9 / 29.0 24.9 26.2 OC 0.15 10.9 13.8 17.0 19.9 22.4 25.6 28.5 31.7 OD 0.15 12.2 15.1 18.3 21.5 24.0 27.2 30.4 33.5 E 0.2 19.1 Plastic Connector with Metal Coupling Wall mounting receptacle for pin contacts (UTG0- - - -P) Part number UTG0104P / UTG0103PVDE UTG0128P UTG01412P UTG01619P UTG01823P / UTG0187PVDEU UTG02028P / UTG02020P UTG02235P UTG02448P Shell size 10 12 14 16 18 20 22 24 A max. B C OD E F OG OH OJ 0.15 0.2 0.15 0.25 *0.25 0.1 0.1 0.1 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 18.3 20.6 23.0 24.6 27.0 29.4 31.8 34.9 23.8 26.2 28.6 31.0 33.3 36.5 39.7 42.9 2.3 31.7 31.7/34.0 33.3/34.3 33.3 11.3 2.5 11.3/17.9 14.5 3.5 15.3 3.2 3.9 17.3 21.8 25.0 28.1 31.3 34.5 37.7 40.9 15.1 18.2 21.4 24.6 27.8 30.9 34.1 37.3 For IP65 waterprotected version add "H" behind "P" e.g. UTG01412PH A square flange sealing has to be ordered separately to guarantee a sealing with the equipment. Refer to "Circular accessories" section (UTFD--). Wall mounting receptacle for socket contacts (UTG0- - - -S) Part number UTG0104S / UTG0103SVDE UTG0128S UTG01412S UTG01619S UTG01823S / UTG0187SVDEU UTG02028S / UTG02020S UTG02235S UTG02448S Shell size A max. 10 12 14 16 18 20 22 24 24.3/27.6 B C OD E F OG OH OJ 0.15 0.2 0.15 0.25 *0.25 0.1 0.1 0.1 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 18.3 20.6 23.0 24.6 27.0 29.4 31.8 34.9 23.8 26.2 28.6 31.0 33.3 36.5 39.7 42.9 17.3 21.8 25.0 28.1 31.3 34.5 37.7 40.9 15.1 18.2 21.4 24.6 27.8 30.9 34.1 37.3 2.3 24.3 24.3/30.4 27.0 28.0 30.4 11.3 2.5 11.3/17.9 14.5 3.5 15.3 3.2 3.9 For IP65 waterprotected version add "H" behind "S" e.g. UTG01412SH A square flange sealing has to be ordered separately to guarantee a sealing with the equipment. Refer to "Circular accessories" section (UTFD--). 37 Plastic Connector with Metal Coupling Free hanging receptacle for pin contacts (UTG1- - - -P) Part number UTG1104P / UTG1103PVDE UTG1128P UTG11412P UTG11619P UTG11823P / UTG1187PVDEU UTG12028P / UTG12020P UTG12235P UTG12448P Shell size 10 12 14 16 18 20 22 24 A max. B 0.15 31.7 C 0.2 8.65 5.0 31.7/34.0 33.3/34.3 33.3 8.65/15.35 12.05 13.85 OD 0.15 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 OE 0.15 19.5 23.5 27.0 30.0 33.0 36.5 39.5 42.5 For IP65 waterprotected version add "H" behind "P" e.g. UTG11412PH Free hanging receptacle for socket contacts (UTG1- - - -S) Part number UTG1104S / UTG1103SVDE UTG1128S UTG11412S UTG11619S UTG11823S / UTG1187SVDEU UTG12028S / UTG12020S UTG12235S UTG12448S Shell size A max. 10 12 14 16 18 20 22 24 24.3/27.6 B 0.15 24.3 C 0.2 8.65 5.0 24.3/30.4 8.65/15.35 12.05 25.9 13.85 For IP65 waterprotected version add "H" behind "S" e.g. UTG11412SH 38 OD 0.15 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 OE 0.15 19.5 23.5 27.0 30.0 33.0 36.5 39.5 42.5 new Metal Circular Connector 69K / IP nce 68 P I ista s c i e r y am Dyn spra t salt h i l an Hig mp o c S RoH UTO SERIES Description "UT0" industrial circular connectors are a range of multiway connectors available in 8 shell sizes and 8 insert arrangements all intermateable, interchangeable and intermountable with the TRIM TRIO "UTG" and "UTP industrial connector families. "UT0" is equipped with identical shells from military connectors complying to MIL-C-26482 spec. Strong and rugged built to resist every environmental and mechanical requirement for indoor and outdoor applications. Amongst several characteristics, "UT0" offers possibilities on: Shielding, High levels on sealing and salt spray. UT0 is also the perfect solution to connect cat5e Ethernet applications in combination with other signals, using the same TRIM TRIO contacts (consult factory for more info). Features and benefits (see p2) * Suitable for shielding applications * Available in 8 shell sizes and 8 insert arrangements. * Available in plug and receptacle versions for both male and female contacts. * Different insert orientations possible. * Plastic inserts with flammability rating: UL94-V0. * 2 levels of water protection: Dynamic IP67 and IP68 both versions are IP69K * 2 levels of salt spray: 48h and 96h Higher salt spray resistance (200/500h) upon request * Cat5e Ethernet compatible. Can be combined with other signals offering the advantage to use same contacts (consult factory). * UL recognition in process. * Metal bayonet ring: - Metal wave spring loaded - Locks with audible positive "click" - Assures 500 matings and unmatings * RoHS compliant Performance characteristics Construction Operating temp: Insulation resistance: Test potential: Durability: Shells: Zinc alloy Backshells and cable glands: Brass Coupling ring: Aluminium alloy Coupling spring: Spring stainless steel Insert: Glass-filled thermoplast UL94-V0 RoHS compliant -40C to +105C 5000 M min. 2000 VAC Up to 2000 matings and unmatings. Vibration Per MIL-STD202 resistance: method 204 Thermal shock: Per MIL-STD202 method 207 Corrosion: Salt spray per MIL-STD 202 method 101 48h (standard version) 96h (black anodised coupling ring) Higher salt spray resistance (200/500h) upon request Shielding effectiveness: 95 dB at 1 Mhz Degree of water protection per DIN 40050: Dynamic IP67 / IP68 / IP69K in mated condition and in combination with sealed back shell. Contact accommodation * "UT0" connectors accept TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) * Contacts to be ordered seperately. How to order UT0 UT0 Body variation: 0 6 14 14 12 12 P S - - H or H6 H 0 : Wall mounting receptacle 6 : Cable plug 7 : Jam nut receptacle for rear panel mounting Shell size: Insert arrangement: P : Pin contacts S : Socket contacts Insert polarisation: No letter : Standard version W, X, Y, Z: Different orientations (consult factory) Application: H : Standard version, water protected IP 67 & IP 69K H6 : Water protected IP 68 & IP 69K (only needed for wall mounting & jam nut receptacles) Design variation: No letter : Standard version Others : Special versions Type of contacts: Plating: No letter : Standard is nickel plating (48h salt spray) 01: Black anodised jam nut (96h salt spray) 02: Black anodised coupling ring (96h salt spray) 39 -- -- new Metal Circular Connector 69K / IP nce 68 P I ista s c i e r y am Dyn spra t salt h i l an Hig mp o c S RoH Cable plug for pin contacts (UT06- - - -PH) E 0,25 Part number Shell size OA 0.2 B max. OC 0.15 UT06104PH 10 21.80 10.2 UT06128PH 12 26.10 13.4 UT061412PH 14 29.30 16.7 UT061619PH 16 32.45 33.00 19.7 UT061823PH 18 35.25 21.7 UT062028PH 20 38.80 24.9 UT062235PH 22 42.00 28.1 UT062448PH 24 45.05 31.2 Part numbers are suitable for both IP67 and IP68 water protection For 96h salt spray version add "02" behind "H" e.g. UT061412PH02 (only bayonet ring will be black anodised) OD 0.15 20.00 23.60 26.80 30.00 33.30 36.55 39.50 42.60 E 0.25 23.25 25.20 Cable plug for socket contacts (UT06- - - -SH) E 0,25 Part number Shell size OA 0.2 B max. OC 0.15 UT06104SH 10 21.80 10.2 UT06128SH 12 26.10 13.4 UT061412SH 14 29.30 33.00 16.7 UT061619SH 16 32.45 19.7 UT061823SH 18 35.25 21.7 UT062028SH 20 38.80 24.9 UT062235SH 22 42.00 27.30 28.1 UT062448SH 24 45.05 31.2 Part numbers are suitable for both IP67 and IP68 water protection For 96h salt spray version add "02" behind "H" e.g. UT061412SH02 (only bayonet ring will be black anodised) 40 OD 0.15 20.00 23.60 26.80 30.00 33.30 36.55 39.50 42.60 E 0.25 23.25 25.20 Metal Circular Connector new 69K / IP nce 68 P I ista s c i e r y am Dyn spra t salt h i l an Hig mp o c S RoH Wall mounting receptacle for pin contacts (UT00----PH/PH6) B 0,3 IP67 Part number IP68 UT00104PH UT00128PH UT001412PH UT001619PH UT001823PH UT002028PH UT002235PH UT002448PH UT00104PH6 UT00128PH6 UT001412PH6 UT001619PH6 UT001823PH6 UT002028PH6 UT002235PH6 UT002448PH6 Shell size 10 12 14 16 18 20 22 24 A max. 33.23 34.75 B C OD E F OG OH OJ 0.3 0.2 0.15 0.25 0.25 0.1 0.1 0.1 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 18.3 20.6 23.0 24.6 26.9 29.4 31.8 34.9 23.8 26.2 28.6 31.0 33.3 36.5 39.7 42.9 17.3 21.8 25.0 28.1 31.3 34.5 37.7 40.9 14.2 18.4 21.5 24.6 27.8 30.9 34.1 37.3 1.6 2.4 11.35 14.55 15.35 3.2 3.9 Part numbers are suitable for both 48h and 96h salt spray. A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to "Circular accessories" section (UTFD--). 0, 1 Wall mounting receptacle for socket contacts (UT00----SH/SH6) O G B 0,3 IP67 Part number IP68 Shell size A max. B C OD E F OG OH OJ 0.3 0.2 0.15 0.25 0.25 0.1 0.1 0.1 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 18.3 20.6 23.0 24.6 26.9 29.4 31.8 34.9 23.8 26.2 28.6 31.0 33.3 36.5 39.7 42.9 17.3 21.8 25.0 28.1 31.3 34.5 37.7 40.9 14.2 18.4 21.5 24.6 27.8 30.9 34.1 37.3 UT00104SH UT00104SH6 10 UT00128SH UT00128SH6 12 25.20 1.6 11.35 UT001412SH UT001412SH6 14 UT001619SH UT001619SH6 16 UT001823SH UT001823SH6 18 UT002028SH UT002028SH6 20 14.55 29.00 2.4 UT002235SH UT002235SH6 22 15.35 UT002448SH UT002448SH6 24 Part numbers are suitable for both 48h and 96h salt spray. A square sealing has to be ordered separately to guarantee a sealing with equipment. 41 3.2 3.9 Refer to "Circular accessories" section (UTFD--). Metal Circular Connector new 69K / IP nce 68 P I ista s c i e r y am Dyn spra t salt h i l an Hig mp o c S RoH Jam nut receptacle for pin contacts (UT07----PH/PH6) - suitable for rear panel mounting IP67 Part number IP68 UT07104PH UT07128PH UT071412PH UT071619PH UT071823PH UT072028PH UT072235PH UT072448PH UT07104PH6 UT07128PH6 UT071412PH6 UT071619PH6 UT071823PH6 UT072028PH6 UT072235PH6 UT072448PH6 Shell size OA B 0.15 0.2 10 12 14 16 18 20 22 24 14.9 19.0 22.2 25.3 28.5 31.7 34.9 38.0 19.30 24.70 25.50 D Max. 33.90 39.00 F Max. 3.2 6.4 40.50 G H K L OM 0.25 0.3 0.25 0.2 0.2 27.0 31.8 34.9 38.1 41.3 46.1 49.2 53.4 22.2 27.0 30.2 33.3 36.5 39.7 42.9 46.0 16.6 20.8 23.9 27.1 30.3 33.4 36.6 39.8 17.0 21.2 24.3 27.5 30.6 33.8 37.0 40.1 17.7 22.5 25.7 28.7 32.0 35.2 38.4 41.5 For 96h salt spray version add "01" at the end of the part number e.g. UT071412PH601 (only jam nut will be black anodised) Jam nut receptacle for socket contacts (UT07---SH/SH6) - suitable for rear panel mounting IP67 Part number IP68 UT07104SH UT07128SH UT071412SH UT071619SH UT071823SH UT072028SH UT072235SH UT072448SH UT07104SH6 UT07128SH6 UT071412SH6 UT071619SH6 UT071823SH6 UT072028SH6 UT072235SH6 UT072448SH6 Shell size OA B 0.15 0.2 10 12 14 16 18 20 22 24 14.9 19.0 22.2 25.3 28.5 31.7 34.9 38.0 19.30 24.70 25.50 D Max. 33.00 39.00 40.50 F Max. 3.2 6.4 G H K L OM 0.25 0.3 0.25 0.2 0.2 27.0 31.8 34.9 38.1 41.3 46.1 49.2 53.4 22.2 27.0 30.2 33.3 36.5 39.7 42.9 46.0 16.6 20.8 23.9 27.1 30.3 33.4 36.6 39.8 17.0 21.2 24.3 27.5 30.6 33.8 37.0 40.1 17.7 22.5 25.7 28.7 32.0 35.2 38.4 41.5 For 96h salt spray version add "01" at the end of the part number e.g. UT071412PH601 (only jam nut will be black anodised) 42 new Metal Circular Connector Insert rotation positions The table shows possible insert rotation positions. 5 positions N,W,X,Y and Z differ in the degree of rotation for the various connectors sizes. The table indicates the exact degree of rotation. Note: Insert rotation positions are optional (consult factory) 69K / IP nce 68 P I ista s c i e r y am Dyn spra t salt h i l an Hig mp o c S RoH Insert rotation positions Shell size Contact number W X Y Z 10 4 45 - - - 12 8 26 - - - 14 12 60 - - - 16 19 30 165 - 315 18 23 - 158 - 270 20 28 79 - 259 - 22 35 13 162 198 265 24 48 60 120 189 351 Extra 0-seals for wall mounting (UT00) and jam nut (UT07) receptacle connectos An extra 0-seal must be mounted on the receptacle connectors when a backshell is used. This to guarantee the IP68 sealing level Part number Shell size UT010REARSEAL 10 UT012REARSEAL 12 UT014REARSEAL 14 UT016REARSEAL 16 UT018REARSEAL 18 UT020REARSEAL 20 UT022REARSEAL 22 UT024REARSEAL 24 43 Metal Circular Connector Notes 44 new High Density Metal Circular Connector UT0W SERIES Description "UT0W" industrial circular connectors are a range of multi way connectors available in 8 shell sizes and 8 high density insert arrangements. "UT0W" wall mounting receptacle connectors have the same panel cut-out dimensions as the MIL-C-26482 series I specifications. Strong and rugged built to resist every environmental and mechanical requirement for indoor and outdoor applications. Amongst several characteristics, "UT0W" offers possibilities on: Shielding, high levels on sealing and salt spray. Features and benefits (see p2) * Suitable for EMC requirements. * Available in 8 shell sizes and 8 insert arrangements. * Available in plug and receptacle version for both male and female contacts. * Different insert orientations possible * Plastic inserts with flammability rating: UL94V0. * 2 levels of water protection: Dynamic IP67 and IP68 both versions are IP69K * 2 levels of salt spray: 48h and 96h Higher salt spray resistance (200/500h) upon request * Higher salt spray (200/500h) upon request. * UL recognition in process. * Metal bayonet ring: - Metal wave spring loaded - Locks with audible positive "click" - Assures 500 matings and unmatings * RoHS compliant How to order Performance characteristics Construction Operating temperature: Insulation resistance: Test potential: Durability: Shells and accessories: Zinc alloy Coupling ring: Aluminium alloy Coupling spring: Spring stainless steel Insert: Glass-filled thermoplast UL94-V0 Finish: Nickel plated RoHS compliant -40C to +105C 5000 M min. 1500 VAC 500 matings and unmatings. Vibration Per MIL-STD202 resistance: method 204 Thermal Per MIL-STD202 shock: method 207 Corrosion: Salt spray per MIL-STD 202 method 101 48h (standard version) 96h (black anodised coupling ring) Higher salt spray resistance (200/500h) upon request Shielding effectiveness: 65 dB at 10 Mhz Degree of water protection per DIN 40050: Dynamic IP67 / IP68 / IP69K in mated condition and in combination with sealed back shell Connector family: Body variation : UT0W UT0W 0 6 16 16 Contact accommodation * "UT0W" connectors accept TRIM TRIO size 20 crimp-type removable snap-lock contacts (see contacts section) * Contacts to be ordered seperately 26 26 P S - - H or H6 H 0 : Wall mounting receptacle 6 : Cable plug 7 : Jam nut receptacle for rear panel mounting Shell size : Insert arrangement : Type of contacts : P : Pin contacts S : Socket contacts Insert polarisation : No letter : Standard version W, X, Y, Z : Different orientations (consult factory) Application : H : Standard version, water protection IP 67 & IP 69K H6 : Water protected IP 68 & IP 69K (only needed for wall mounting & jam nut receptacles) Design variation : No letter : Standard version Others : Special versions Plating : No letter : standard is nickel plating (48h salt spray) 01: Black anodised, jam nut (96h salt spray) 02: Black anodised coupling ring (96h salt spray) 45 --- - - new High Density Metal Circular Connector Cable plug for pin contacts (UT0W6----PH) E 0,25 Part number UT0W6106PH UT0W61210PH UT0W61419PH UT0W61626PH UT0W61832PH UT0W62041PH UT0W62255PH UT0W62461PH Shell size OA 0.2 21.80 26.10 29.30 32.45 35.25 38.80 42.00 45.05 10 12 14 16 18 20 22 24 B max. 33.00 OC 0.15 10.2 13.4 16.7 19.7 21.7 24.9 28.1 31.2 OD 0.15 20.00 23.60 26.80 30.00 33.30 36.55 39.50 42.60 E 0.25 19.00 Part numbers are suitable for both IP67 and IP68 water protection For 96h salt spray version add "02" behind "H" e.g. UT0W61419PH02 (only bayonet ring will be black anodised) Cable plug for socket contacts (UT0W6----SH) E 0,25 Part number Shell size OA 0.2 B max. OC 0.15 21.80 10.2 UT0W6106SH 10 26.10 13.4 UT0W61210SH 12 29.30 25.30 16.7 UT0W61419SH 14 32.45 19.7 UT0W61626SH 16 35.25 21.7 UT0W61832SH 18 38.80 24.9 UT0W62041SH 20 42.00 27.30 28.1 UT0W62255SH 22 45.05 31.2 UT0W62461SH 24 Part numbers are suitable for both IP67 and IP68 water protection For 96h salt spray version add "02" behind "H" e.g. UT0W61419SH02 (only bayonet ring will be black anodised) 46 OD 0.15 20.00 23.60 26.80 30.00 33.30 36.55 39.50 42.60 E 0.25 19.00 High Density Metal Circular Connector new Wall mounting receptacle for pin contacts (UT0W0----PH/PH6) B 0,3 IP67 Part number IP68 UT0W0106PH UT0W01210PH UT0W01419PH UT0W01626PH UT0W01832PH UT0W02041PH UT0W02255PH UT0W02461PH UT0W0106PH6 UT0W01210PH6 UT0W01419PH6 UT0W01626PH6 UT0W01832PH6 UT0W02041PH6 UT0W02255PH6 UT0W02461PH6 Shell size 10 12 14 16 18 20 22 24 A max. 33.23 34.75 B C OD E F OG 0,3 0.2 0.15 0.25 0.25 0.1 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 18.3 20.6 23.0 24.6 26.9 29.4 31.8 34.9 23.8 26.2 28.6 31.0 33.3 36.5 39.7 42.9 1.6 2.4 11.35 14.55 15.35 3.2 3.9 OH 0.1 OJ 0.1 17.3 21.8 25.0 28.1 31.3 34.5 37.7 40.9 14.2 18.4 21.5 24.6 27.8 30.9 34.1 37.3 Part numbers are suitable for both 48hrs and 96h salt spray. A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to "Circular accessories" section (UTFD--). Wall mounting receptacle for socket contacts (UT0W0----SH/SH6) B 0,3 IP67 Part number IP68 Shell size A max. B C OD E F OG 0.3 0.2 0.15 0.25 0.25 0.1 15.0 19.0 22.2 25.3 28.5 31.7 34.9 38.0 18.3 20.6 23.0 24.6 26.9 29.4 31.8 34.9 23.8 26.2 28.6 31.0 33.3 36.5 39.7 42.9 UT0W0106SH UT0W0106SH6 10 UT0W01210SH UT0W01210SH6 12 25.20 1.6 11.35 UT0W01419SH UT0W01419SH6 14 UT0W01626SH UT0W01626SH6 16 UT0W01832SH UT0W01832SH6 18 UT0W02041SH UT0W02041SH6 20 14.55 29.00 2.4 UT0W02255SH UT0W02255SH6 22 15.35 UT0W02461SH UT0W02461SH6 24 Part numbers are suitable for both 48hrs and 96h salt spray. A square sealing has to be ordered separately to guarantee a sealing with equipment. 47 3.2 3.9 OH 0.1 OJ 0.1 17.3 21.8 25.0 28.1 31.3 34.5 37.7 40.9 14.2 18.4 21.5 24.6 27.8 30.9 34.1 37.3 Refer to "Circular accessories" section (UTFD--). new High Density Metal Circular Connector Jam nut receptacle for pin contacts (UT0W7---PH/PH6) - suitable for rear panel mounting IP67 Part number IP68 UT0W7106PH UT0W71210PH UT0W71419PH UT0W71626PH UT0W71832PH UT0W72041PH UT0W72255PH UT0W72461PH UT0W7106PH6 UT0W71210PH6 UT0W71419PH6 UT0W71626PH6 UT0W71832PH6 UT0W72041PH6 UT0W72255PH6 UT0W72461PH6 Shell size OA B 0.15 0.2 10 12 14 16 18 20 22 24 14.9 19.0 22.2 25.3 28.5 31.7 34.9 38.0 D Max. 19.30 33.90 24.70 39.00 25.50 40.50 F Max. 3.2 6.4 G H K L OM 0.25 0.3 0.2 0.2 0.2 27.0 31.8 34.9 38.1 41.3 46.1 49.2 53.4 22.2 27.0 30.2 33.3 36.5 39.7 42.9 46.0 16.6 20.8 23.9 27.1 30.3 33.4 36.6 39.8 17.0 21.2 24.3 27.5 30.6 33.8 37.0 40.1 17.7 22.5 25.7 28.7 32.0 35.2 38.4 41.5 For 96h salt spray version add "01" at the end of the part number e.g. UT0W71419PH601 (only jam nut will be black anodised) Jam nut receptacle for socket contacts (UT0W7---SH/SH6) - suitable for rear panel mounting IP67 Part number IP68 UT0W7106SH UT0W71210SH UT0W71419SH UT0W71626SH UT0W71832SH UT0W72041SH UT0W72255SH UT0W72461SH UT0W7106SH6 UT0W71210SH6 UT0W71419SH6 UT0W71626SH6 UT0W71832SH6 UT0W72041SH6 UT0W72255SH6 UT0W72461SH6 Shell size OA B 0.15 0.2 10 12 14 16 18 20 22 24 14.9 19.0 22.2 25.3 28.5 31.7 34.9 38.0 D Max. 19.30 33.00 24.70 39.00 25.50 40.50 F Max. 3.2 6.4 G H K L OM 0.25 0.3 0.2 0.2 0.2 27.0 31.8 34.9 38.1 41.3 46.1 49.2 53.4 22.2 27.0 30.2 33.3 36.5 39.7 42.9 46.0 16.6 20.8 23.9 27.1 30.3 33.4 36.6 39.8 17.0 21.2 24.3 27.5 30.6 33.8 37.0 40.1 17.7 22.5 25.7 28.7 32.0 35.2 38.4 41.5 For 96h salt spray version add "01" at the end of the part number e.g. UT0W71419PH601 (only jam nut will be black anodised) 48 new High Density Metal Circular Connector Insert rotation positions The table shows possible insert rotation positions. 5 positions N,W,X,Y and Z differ in the degree of rotation for the various connectors sizes. The table indicates the exact degree of rotation. Note: Insert rotation positions are optional (consult factory) Insert rotation positions Shell size Contact number W X Y Z 10 6 90 - - - 12 10 60 155 270 295 14 19 30 165 315 - 16 26 60 - 275 338 18 32 85 138 222 265 20 41 45 126 225 - 22 55 30 142 226 314 24 61 90 180 270 324 Extra 0-seals for wall mounting (UT0W0) and jam nut (UT0W7) receptacle connectos An extra 0-seal must be mounted on the receptacle connectors when a backshell is used. This to guarantee the IP68 sealing level Part number Shell size UT010REARSEAL 10 UT012REARSEAL 12 UT014REARSEAL 14 UT016REARSEAL 16 UT018REARSEAL 18 UT020REARSEAL 20 UT022REARSEAL 22 UT024REARSEAL 24 49 new High Density Metal Circular Connector Notes 50 Shielded Connectors How to assemble shielded connectors... Cable gland body 1. Put all the parts over the cable as shown on the picture. 2. Keep about 10mm of the shielding (dim A) A B Adaptor 3. The total strip length (dim B) of the outer jacket has to be defined practically. This length is defined by the length of the adaptor, the cable gland body, type of contacts, the gender of the plug connector and the dim. L as shown on picture 2. 4. The strip length of the individual wires is defined in the different contact sections. 5. Put the contacts in the corresponding cavities 6. Screw / tighten the adaptor and the cable gland body. The max tightening torque is indicated in the table below. 7. Make sure the dim L is kept after the assembly of the adaptor and the cable gland body. This dimension is needed to allow repair of the harnessing. It will also release the stress on the contacts when the assembly of the cable clamp is finished. Shielding ferrule 8. Carefully slide the shielding ferrule until is positioned over the shielding and as close as possible to the cable jacket. 9. Make sure that the shielding ferrule is correctly polarised. This polarisation is a feature to avoid twisting of the cable during the tightening of the cable gland. 51 Shielded Connectors How to assemble shielded connectors... (con't) Cable gland body 10. Manually push the shielding ferrule inside the cable gland body. 11. Make sure the shielding ferrule does not slide over the cable jacket. 12. Hold the cable in this position prior to the assembly of the cable gland hood. 13. Hold the cable in the same position as explained above and tighten the cable gland hood. The max tightening torque is indicated in the table below. 14. To ease the tightening operation, an empty receptacle connector can be used when fixed in a bench. 15. Make sure that the cable is not twisted during the tightening operation. Max tightening torques in Nm Shell size Cable gland body Cable gland hood 10 6 5 12 10 8 14 10 8 16 14 12 18 14 12 20 24 20 22 24 20 24 24 20 Above tightening torques are indicative and have to be adjusted in accordance to the cable diameter and application. 52 Ruggedized Reverse Bayonet Connectors UTV SERIES 9K I P6 8/ 6 ray P ic I lt sp a le m s a tab hr Dyn oun 500 m r o e t t Up 4 in 523 9 G V new Completely intermountable with VG 95234 : the MS 5015 reverse bayonet connectors Description This connector series is an enhanced version of the VG 95234 connector standard but remains completely intermountable with VG 95234 : the MS 5015 reverse bayonet connectors. Features and benefits (see also page 3) * An interfacial seal is present on the male inserts to extend the creepage distance and to have a better sealing when the connector is mated. * The insulator is retained into the plug or receptacle shell by a metallic retaining ring which can be removed with a small screwdriver. Once removed, user can defined insulator orientation. * Contacts gauge 8, 12 or 16 are machined crimp contacts, removable thanks to a clip on the contact. * No tools are needed to insert contacts into the insulator. An extraction tool is available to extract the contacts. The tool is engaged by the front face of the connector and the contacts are rear released. * Contacts are crimped thanks to very common toolings. * The connector is rated 2 levels of water protection (see page 3): Dynamic IP67/IP68/IP69K when mated and used with suitable accessories, a grommet or a sealed back shell. * This connector can be supplied fully assembled or in component form (please consult us). * Corrosion spray resistance is rated up to 500 hours salt spray * Cadmium and lead free materials are used 53 Ruggedized Reverse Bayonet Connector Description Receptacle Yellow marking for locking end indication Wear pins Pin contact to crimp with metallic retention clip Retaining insulator ring Hard Thermoplastic insert Interfacial seal Receptacle shell Plug Roller Socket contact to crimp with metallic retention clip Retaining insulator ring Hard Thermoplastic insert Plug shell 54 Ruggedized Reverse Bayonet Connector 55 Ruggedized Reverse Bayonet Connector Connectors Ordering Information (without contacts and accessories) Shells, backshells, contacts and accessories have to be ordered separately UTV B 22 -- 14 P N -- Series Shell type Rear mounting receptacle Plug B D Rear mounting receptacle for PC tails contact # 16 contacts mounted C Shell size : 18 - 20 -22 - 24 - 28 - 32 - 36 - 40 Layouts Contact type : P - Pin S - Socket Insert Orientation : N ; W ; X ; Y ; Z or 0 0 = for insulator not installed in the shell Modification Code : Please consult us Nota : Please consult us if you want to order the connector in component form (shell and insert). 56 Ruggedized Reverse Bayonet Connector Connector Dimensions Receptacle Shell size A Max B 0/+0.4 C 0.2 OD Max E 0.3 18 45.50 23.05 4.00 25.50 35.00 3.25 20 45.50 23.05 4.00 28.70 38.00 3.25 22 45.50 23.05 4.00 31.90 41.00 3.25 24 48.00 23.05 4.00 35.20 44.50 3.75 28 48.00 24.05 4.00 41.50 50.80 3.75 32 48.00 24.05 4.00 47.90 57.00 4.35 36 48.00 24.05 4.00 52.50 63.50 4.35 40 48.00 24.05 4.00 59.00 70.00 4.35 Receptacle with PC tails contact # 16 57 OF Threading G 0/+0.15 Class 2A 1"x20 UNEF 1 1/8"x18 UNEF 1 1/4"x18 UNEF 1 3/8"x18 UNEF 1 5/8"x18 UNE 1 7/8"x16 UN 2 1/16"x16 UNS 2 5/16"x16 UN H 0.1 OK -0.15/0 27.00 30.80 29.40 34.20 31.80 37.40 34.90 40.90 39.70 46.70 44.50 53.40 49.20 59.60 55.50 65.50 Ruggedized Reverse Bayonet Connector Panel Cutout 4 holes O C Shell size A 0.15 B 0/+0.3 C 0.10 Maximum thickness of the panel for rear mounting 18 27 31,2 3,4 3 20 29,4 34,6 3,4 3 22 31,8 37,8 3,4 3 24 34,9 41,3 3,9 3 28 39,7 47,1 3,9 3 32 44,5 53,8 4,5 3 36 49,2 60 4,5 3 40 55,5 66,4 4,5 3 Note : The above panel cut-out enables front mounting of all receptacles. 58 Ruggedized Reverse Bayonet Connector Plug Shell size A Max B Max C Max Threading G Class 2A 18 45.60 37.30 25.50 20 45.60 41.50 28.70 22 45.60 44.00 31.90 24 45.60 48.50 35.20 28 48.10 55.30 41.50 32 48.10 62.00 47.90 36 48.10 66.80 52.50 40 48.10 74.50 59.00 1"x 20 UNEF 1 1/8"x 18 UNEF 1 1/4"x 18 UNEF 1 3/8"x 18 UNEF 1 5/8"x 18 UNEF 1 7/8"x 16 UN 2 1/6" x 16 UNS 2 5/16"x 16 UN 59 Ruggedized Reverse Bayonet Connector Layouts (marking on front face of female insulator) 18-19 O 3.6 20-15 O5 10 contacts # 16 24-10 O 3.6 7 contacts # 12 32 A13 O5 22-14 28-21 O7 19 contacts # 16 36 A22 O5 O 3.6 7 contacts # 8 40 A35 40 A60 O5 13 contacts # 12 37 contacts # 16 O 3.6 22 contacts # 12 35 contacts # 12 60 contacts # 16 Note : For other layouts: consult factory. Alternative insert orientation positions Key Angular displacement of insert Angular Position N 60 Insulator weight (g) Layouts N W X Y Z 18-19 0 - 120 240 - Male Female 10 16 20-15 0 80 - - 280 13 21 25 22-14 0 80 - - 280 16 24-10 0 80 110 250 280 19 31 28-21 0 80 110 250 280 27 40 32-A13 0 65 130 230 295 45 75 36-A22 0 80 110 250 280 53 88 40-A35 0 70 130 230 290 61 99 40-A60 0 80 110 250 280 63 100 Ruggedized Reverse Bayonet Connector Accessories Backshells ordering information Modification Code Series UTV UTV J C S S 18 22 -- 00 -- 14 00 00 M S 18 -- 00 00 Backnut R Cable clamp C Backshell for PMA tube S Cable clamp with sealing gland J Cable clamp with sealing gland (trumpet) K Taille clamp de boitier : 18 - gland 20 - 22 24 - 28 - 32 - 36 - 40 Cable with sealing for -shielding T S - Straight backshell E - Elbow backshell Shell size : 18 - 20 - 22 - 24 - 28 - 32 - 36 - 40 Layout (grommet included) or 00 (without grommet) Adaptor type : 10 - long 00 - short Grommet type : M for male or L for female (if grommet needed) Plug cap: F ex: VGE1Fxx (xx = shell size) receptacle cap: E ex: VGE1Exx (xx = shell size) Adaptor ordering information Series UTV P - Adaptor with PG outlet* S - Adaptor for straight backshell Shell size : 18 - 20 - 22 - 24 - 28 - 32 - 36 - 40 Adaptor type : 10 - long 00 - short * For metric threading: consult factory 61 P Ruggedized Reverse Bayonet Connector Accessories Grommet (only when needed on spare parts) Grommet are delivered with a conical ring Layout Grommet type Part number Wire insulator diameter (mm) Mini Maxi * 18-19 male UTVM18-1900 1,2 2,95 18-19 female UTVL18-1900 1,2 2,95 20-15 male UTVM20-1500 1,2 3,6 20-15 female UTVL20-1500 1,2 3,6 22-14 male UTVM22-1400 1,2 2,95 22-14 female UTVL22-1400 1,2 2,95 24-10 male UTVM24-1000 4,2 6,2 24-10 female UTVL24-1000 4,2 6,2 28-21 male UTVM28-2100 1,2 2,95 28-21 female UTVL28-2100 1,2 2,95 32A13 male UTVM32A1300 1,2 3,6 32A13 female UTVL32A1300 1,2 3,6 36A22 male UTVM36A2200 1,2 3,6 36A22 female UTVL36A2200 1,2 3,6 40A35 male UTVM40A3500 1,2 3,6 40A35 female UTVL40A3500 1,2 3,6 40A60 male UTVM40A6000 1,2 2,95 40A60 female UTVL40A6000 1,2 2,95 * Please consult us if your wire has an insulation diameter over these values, we will propose you another grommet. Grommet filler plug Contact size Part number Color Photo # 16 8500-479 blue # 12 Panel gasket Shell size Part number 20 22 24 28 32 36 40 UTVG20 UTVG22 UTVG24 UTVG28 UTVG32 UTVG36 UTVG40 A 0.5 38 41 44.5 50.8 57 63.5 69.9 Dimensions B 0.2 C 0/+0.3 29.4 31.8 34.9 39.7 44.5 49.2 55.5 34.2 37.4 40.9 46.7 53.4 59.6 65.5 62 O D 0/+0.3 4.2 4.2 4.2 5.1 5.1 5.1 5.1 4 holes O D Ruggedized Reverse Bayonet Connector Synoptic of straight backshells (for IP67 applications) Plug Receptacle + + + + + + + + + U Description Backnut Ref Cable clamp Cable clamp UTV RS****00 Cable clamp UTV CS****00 Backshell for PMA tube UTV SS****10 with with Cable clamp Cable clamp Cable clamp Cable clamp Backshell sealing gland sealing gland with with with with (trumpet (trumpet sealing sealing for sealing sealing shape to shape to gland for gland for PMA tube gland gland avoid cable avoid cable shielding shielding UTV SS****00 UTV JS****10 UTV JS****00 wound) wound) UTV KS****10 UTV KS****00 Description Long adaptor with PG outlet Short adaptor with PG outlet Ref Synoptic of adaptors UTV PS**0010 UTV PS**0000 NB: IP68 backshells are available under request 63 UTV TS****10 UTV TS****00 Ruggedized Reverse Bayonet Connector Dimensions **** = 32A00 **** = 36A22 **** = 36A00 without grommet **** = 32A13 Shell 40 with grommet **** = 28-00 without grommet with grommet **** = 28-21 without grommet **** = 24-00 Shell 36 with grommet **** = 24-10 with grommet **** = 22-00 Shell 32 without grommet **** = 22-14 Shell 28 without grommet **** = 20-00 with grommet **** = 20-15 Shell 24 without grommet without grommet **** = 18-00 Shell 22 with grommet with grommet **** = 18-19 Shell 20 without grommet with grommet Shell 18 **** = **** 40A35 = 40A60 40A00 A 22.5 22.5 22.5 22.5 24 24 24 24 B 45.6 45.6 45.6 45.6 48.1 48.1 48.1 48.1 17 17 17 C 18 18 18 18 17 D 44 44 44 44 47 E 28,5 28,5 26 26 23 F 48,6 48,6 48,6 48,6 58 48 48 48 G 34 34 34 34 33 33 33 33 H 35,5 35,5 38,5 38,5 38.5 38.5 52 46 K PMA17 PMA17 PMA23 PMA23 PMA29 PMA29 PMA36 PMA48 M 23 23 31 31 31.5 31.5 37.5 45 N 7/12 9/14 10/18 10/18 14/24 14/24 22/30 25/35 51.5 57 PG36 PG42 P 30 31,5 38,5 38,5 45 45 S 33,5 33,5 43 43 52 52 T 8/12,5 10/14,5 13,5/18 13,5/18 17/24 17/24 4/15,5 7/15,5 9/15,5 8,5/19,5 9,5/19,5 PG13,5 PG16 PG 21 PG21 PG29 U PG29 Note : Dimensions are not contractual and may be subject to modifications. All backshells are compatible with a grommet and a conical ring. For cable or PMA tube diameter not included in the above chart please consult us. Example of rear dimensions calculation of a shell size 18 connector with a sealing gland cable clamp backshell without grommet and with a long adaptor Backshell P/N : UTV JS 18 00 10 Rear dimensions receptacle + backshell : A + F + M = 94,1 mm 64 Ruggedized Reverse Bayonet Connector Synoptic of elbow backshells (IP67 applications) Receptacle + + + + Description Backshell for PMA tube Cable clamp with sealing gland Cable clamp with sealing gland (trumpet shape to avoid cable wound) Cable clamp with sealing gland for shielding Part number UTV SE****00 UTV JE****00 UTV KE****00 UTV TE****00 Plug Receptacle + Plug NB: IP68 backshells are available upon request E U Description Cable clamp Part number UTV CE****00 65 Ruggedized Reverse Bayonet Connector Dimensions without grommet with grommet without grommet with grommet **** = 18-00 **** = 20-15 **** = 20-00 **** = 22-14 **** = 22-00 **** = 24-10 **** = 24-00 **** = 28-21 **** = 28-00 **** = 32A13 **** = 32A00 **** = 36A22 **** **** = = 40A35 36A00 40A60 without grommet with grommet **** = 18-19 Shell 40 with grommet without grommet without grommet with grommet Shell 36 without grommet Shell 32 with grommet Shell 28 without grommet Shell 24 with grommet Shell 22 without grommet Shell 20 with grommet Shell 18 **** = 40A40 A 22,5 22,5 22,5 22,5 24 24 24 24 B 45,6 45,6 45,6 45,6 48,1 48,1 48,1 48,1 C 44 43,5 43,5 46 41 D 26 25,5 17,5 20 18 E 28,5 28,5 26 26 23 F 43 44 44 49 46 59 60 H 35,5 35,5 38,5 38,5 38,5 38,5 46 K PMA17 PMA17 PMA23 PMA23 PMA29 PMA36 PMA36 M 23 23 31 31 31,5 31,5 37.5 N 7/12 9/14 10/18 10/18 14/24 14/24 22/30 51,5 P 30 31,5 38,5 38,5 45 45 S 33,5 33,5 43 43 52 52 T 8/12,5 10/14,5 13,5/18 13,5/18 17/24 17/24 U 4/15,5 7/15,5 9/15,5 8,5/19,5 9,5/19,5 PG13,5 PG16 PG 21 PG21 PG29 PG29 Note : Dimensions are not contractual and may be subject to modifications. All backshells are compatible with a grommet and a conical ring. For cable or PMA tube diameter not included in the above chart please consult us. 66 PG36 PG42 Ruggedized Reverse Bayonet Connector Tooling Data Contact Size Contact size Contact type Contact O mm Contact Part number mm2 AWG #16 Male 1.6 RM16M23K 0.52 - 1.50 #16 Female 1.6 RC16M23K 0.52 - 1.50 #16 Male 1.6 RM14M30K 2.50 Crimp tool Locator Extraction tool 20-16 MH860 (M22520/7-01) MH86164G RX2025GE1 20-16 MH860 (M22520/7-01) MH86164G RX2025GE1 14 AF8 (M22520/3-1) TP1142 (selector on 8) RX2025GE1 AF8 (M22520/3-1) TP1142 (selector on 8) RX2025GE1 #16 Female 1.6 RC14M30K 2.50 14 #12 Male 2.4 8291 1437 NA 0.50 20 M317 VGE10077A 5106.021.09.24 #12 Female 2.4 8291 1436 A 0.50 20 M317 VGE10077A 5106.021.09.24 #12 Male 2.4 8291 1435 NA 0.75 - 1.00 18 M317 VGE10077A 5106.021.09.24 #12 Female 2.4 8291 1434 A 0.75 - 1.00 18 M317 VGE10077A 5106.021.09.24 #12 Male 2.4 8291 1463 NA 1.50 16 M317 VGE10077A 5106.021.09.24 #12 Female 2.4 8291 1462 A 1.50 16 M317 VGE10077A 5106.021.09.24 #12 Male 2.4 8291 1465 NA 2.50 14 M317 VGE10077A 5106.021.09.24 #12 Female 2.4 8291 1464 A 2.50 14 M317 VGE10077A 5106.021.09.24 #12 Male 2.4 8291 1437 NK 0.50 20 M317 VGE10077A 5106.021.09.24 #12 Female 2.4 8291 1436 K 0.50 20 M317 VGE10077A 5106.021.09.24 #12 Male 2.4 8291 1435 NK 0.75 - 100 18 M317 VGE10077A 5106.021.09.24 #12 Female 2.4 8291 1434 K 0.75 - 100 18 M317 VGE10077A 5106.021.09.24 #12 Male 2.4 8291 1463 NK 1.50 16 M317 VGE10077A 5106.021.09.24 #12 Female 2.4 8291 1462 K 1.50 16 M317 VGE10077A 5106.021.09.24 #12 Male 2.4 8291 1465 NK 2.50 14 M317 VGE10077A 5106.021.09.24 #12 Female 2.4 8291 1464 K 2.50 14 M317 VGE10077A 5106.021.09.24 #8 Male 3.6 8291 3601 A 1.50 16 M317 VGE10078A 5106.021.09.36 #8 Female 3.6 8291 3600 A 1.50 16 M317 VGE10078A 5106.021.09.36 #8 Male 3.6 8291 3603 A 2.50 14 M317 VGE10078A 5106.021.09.36 #8 Female 3.6 8291 3602 A 2.50 14 M317 VGE10078A 5106.021.09.36 #8 Male 3.6 8291 3605 A 4.00 12 M317 VGE10078A 5106.021.09.36 #8 Female 3.6 8291 3604 A 4.00 12 M317 VGE10078A 5106.021.09.36 #8 Male 3.6 8291 3607 A 6.00 10 M317 VGE10078A 5106.021.09.36 #8 Female 3.6 8291 3606 A 6.00 10 M317 VGE10078A 5106.021.09.36 For detailed information on crimp tooling: see crimp tooling section. 67 Ruggedized Reverse Bayonet Connector Notes 68 Mixed Power and Signal Description Power connectors are circular connectors to meet mixed power and signal requirements. This range of power connectors is an extension of the long established and popular TRIM TRIO connector series shown in this catalogue, but with the advantage of offering a number of additional features Features and benefits * Connectors suitable for mixed power / signal application. * Design in flexibility of TRIM TRIO. Our Design flexibilities are virtually unlimited on: * * * * * * * * * Contact arrangements Mixed contact lay-outs Power versions Hybrid contacts arrangements Filtered connectors High speed solutions Robust designs Higher corrosion withstandings ... The next pages are listing some of the mixed power / signal TRIM TRIO connector configurations. It is intended to give you a general idea of our design capabilities. As the creation of mixed power / signal TRIM TRIO connectors is an ongoing process, we advise you to contact our nearest SOURIAU sales office if you have specific connector needs. Our design flexibility is virtually unlimited, so we are always willing to consider any customised design. Separate data sheets with more detailed technical info of the listed mixed power / signal TRIM TRIO versions are available. 69 Mixed Power and Signal UT0/UTG size 10-3W3 with: 3 contacts #20 (1.0mm) 3 standard TRIM TRIO contacts Description UT0/UTG size 10-3W3 is a standard shell size 10 connector with a modified insert arrangement to accept: 3 TRIM TRIO #20 (1.0mm) contacts 3 TRIM TRIO #16 (1.6mm) contacts Typical performance characteristics Contact accommodation * For characteristics, refer to UTG/UT0 series and Contact sections * #20 cavities accept the #20 TRIM TRIO size 16 crimptype removable snap-lock contacts (see contacts section) * #16 cavities accept the #16 TRIM TRIO crimptype removable snap-lock contacts (see contacts section) * Contacts to be ordered seperately. Available part numbers: Part number Shell size UTG1103W3S UTG6103W3PN UT01103W3SH6 10 Description Free hanging receptacle for socket contacts Cable plug connector for pin contacts Metal free hanging receptacle for socket contacts For dimensions or others characteristics, refer to section UTG/UT0 with corresponding shell size or refer to the technical drawings UTG size 12-3 with 3 power contacts. Description UTG size 12-3 is a standard shell size 12 connector with a modified insert arrangement to accept 3 power contacts #12 (2.4mm). It also offers 3 extra discrimination cavities that accept the SMSPKE3 discrimination pins. Typical performance characteristics * Power contacts #12 (2.4mm) for up to 26 Amp * For furtur characteristics, refer to UTG series and power contacts 8291 series. Contact accommodation * Power cavities accept the 8291 power contacts (see power contacts 8291 section) * Contacts to be ordered seperately. Available part numbers: Part number UTG0123S UTG0123SH UTG0123P (consult factory) UTG0123PH (consult factory) UTG6123SN (consult factory UTG6123PN Shell size 12 Description Panel mount receptacle for socket contacts. Panel mount receptacle for socket contacts - IP65 waterprotection Panel mount receptacle for pin contacts. Panel mount receptacle for pin contacts - IP65 waterprotection Cable plug connector for socket contacts. Cable plug connector for pin contacts. For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings 70 Mixed Power and Signal UTG size 14-8 with 4 power & 4 standard TRIM TRIO contacts. Description UTG size 14-8 is a standard shell size 14 connector with a modified insert arrangement to accept 4 power contacts #12 (2.4mm) and 4 TRIM TRIO #16 (1.6mm) signal contacts. Typical performance characteristics * Power contacts #12 (2.4mm) for up to 26 Amp * Per VDE 0110 (refer to technical drawings) * For furtur characteristics, refer to UTG series and power contacts 8291 series. Available part numbers: Part number UTG0148P24PVDE UTG0148P24PHVDE UTG0148P24SVDE (consult factory) UTG0148P24SHVDE (consult factory) UTG6148P24SNVDE UTG6148P24PNVDE (consult factory) Shell size 14 Contact accommodation * Signal cavities accept the TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) * Power cavities accept the 8291 power contacts (see power contacts 8291 section) * Contacts to be ordered seperately. Description Panel mount receptacle for pin contacts. Panel mount receptacle for pin contacts - IP65 waterprotection Panel mount receptacle for socket contacts. Panel mount receptacle for socket contacts - IP65 waterprotection Cable plug connector for socket contacts. Cable plug connector for pin contacts. For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings UTG size 18-7 with 2 power & 5 standard TRIM TRIO contacts. Description UTG size 18-7 is a standard shell size 18 connector with a modified insert arrangement to accept 2 power contacts #12 (2.4mm) and 5 TRIM TRIO #16 (1.6mm) signal contacts. Typical performance characteristics * * * * Power contacts #12 (2.4mm) for up to 26 Amp Per VDE 0110 Group C - 380V. 2 mating levels. For furtur characteristics, refer to UTG series and power contacts 8291 series. Available part numbers: Part number UTG0187PVDE34 UTG0187PHVDE34 UTG0187SVDE34 UTG0187SHVDE34 UTG6187PNVDE34 UTG6187SNVDE34 Shell size 18 Contact accommodation * Signal cavities accept the TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) * Power cavities accept the 8291 power contacts (see power contacts 8291 section) * Contacts to be ordered seperately. Description Panel mount receptacle for pin contacts. Panel mount receptacle for pin contacts - IP65 waterprotection Panel mount receptacle for socket contacts. Panel mount receptacle for socket contacts - IP65 waterprotection Cable plug connector for pin contacts. Cable plug connector for socket contacts. For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings 71 Mixed Power and Signal UTG size 24-7 with 7 power & 2 standard TRIM TRIO contacts. Description UTG size 24-7 is a standard shell size 24 connector with a modified insert arrangement to accept 7 power contacts #8 (3.6mm) and 2 TRIM TRIO #16 (1.6mm) signal contacts. Typical performance characteristics * * * * * Power contacts #8 (3.6mm) for up to 44 Amp VDE 0110 Group C - 660V. UL recognized file Nr.: E238675 Central power cavity is advanced for grounding purposes. For furtur characteristics, refer to UTG series and power contacts 8291 series. Available part numbers: Part number UTG0247P UTG0247PH UTG0247S UTG0247SH UTG6247PN UTG6247SN Shell size 24 Contact accommodation * Signal cavities accept the TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) * Power cavities accept the 8291 power contacts (see power contacts 8291 section) * Contacts to be ordered seperately. Description Panel mount receptacle for pin contacts. Panel mount receptacle for pin contacts - IP65 waterprotection Panel mount receptacle for socket contacts. Panel mount receptacle for socket contacts - IP65 waterprotection Cable plug connector for pin contacts. Cable plug connector for socket contacts. For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings UTG size 24-11 with 4 power & 7 standard TRIM TRIO contacts. Description UTG size 24-11 is a standard shell size 24 connector with a modified insert arrangement to accept 4 power contacts #8 (3.6mm) and 7 TRIM TRIO #16 (1.6mm) signal contacts. Typical performance characteristics * Power contacts #12 (2.4mm) for up to 26 Amp * Per VDE 0110 (refer to technical drawings) * For furtur characteristics, refer to UTG series and power contacts 8291 series.. Contact accommodation * Signal cavities accept the TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) * Power cavities accept the 8291 power contacts (see power contacts 8291 section) * Contacts to be ordered seperately. Available part numbers: Part number UTG02411P UTG02411PH UTG02411S (consult factory) UTG02411SH (consult factory) UTG62411SN UTG62411PN (consult factory) Shell size 24 Description Panel mount receptacle for pin contacts. Panel mount receptacle for pin contacts - IP65 waterprotection Panel mount receptacle for socket contacts. Panel mount receptacle for socket contacts - IP65 waterprotection Cable plug connector for socket contacts. Cable plug connector for pin contacts. For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings 72 Circular Boardmount Versions UTP7 size 12-8 for boardmount applications Description UTP7 size 12-8 is a standard jam nut receptacle size 12 connector with pre-assembled TRIM TRIO #16 (1.6mm) dipsolder contacts Performance characteristics Refer to technical drawings Available part numbers (consult factory): Different part number are available with: * Male or female contacts * Machined or stamped and formed contacts * Different solder tail lengths 73 Mixed Power and Signal Notes 74 Circular Accessories Plastic cable clamp with strain relief (UTG--AC) Suitable for UTP-UTG Part number UTG10AC UTG12AC UTG14AC UTG16AC UTG18AC UTG20AC UTG22AC UTG24AC Shell size Cable range O 10 12 14 16 18 20 22 24 3.0 - 8.70 3.0 - 12.8 4.0 - 13.8 5.0 - 17.0 5.0 - 19.0 5.0 - 21.0 5.0 - 23.0 8.0 - 27.0 OA 0.4 21.0 24.0 27.0 30.2 33.3 36.5 39.7 42.9 L 0.5 40.0 40.0 46.0 46.0 50.0 55.0 60.0 65.0 For threading specifications see last page of this section "Circular accessories" Plastic cable clamp with strain relief nut for waterprotected (IP65) applications (UTG--PG) Suitable for UTP-UTG Part number UTG10PG UTG12PG UTG14PG UTG16PG UTG18PG UTG20PG UTG22PG UTG24PG 1 Shell size Sealing* outer dia x inner dia's L 10 12 14 16 18 20 22 24 13.5 x 5 x 8 16 x 7 x 10.5 x 13 x 16 18.5 x 7 x 105 x 13 x 16 20.5 x 8 x 10.5 x 13 x 16 20.5 x 8 x 10.5 x 13 x 16 26 x 11 x 15 x 18 x 22 26 x 11 x 15 x 18 x 22 35 x 19 x 23 x 27 x 31 54 57 62 68 71 82 88 103 *In order to accommodate different cable dia's, the sealing exisits of different layers which can be pulled out easily. Cable clamp has a PG style cable gland. For threading specifications see last page of this section "Circular accessories" 75 A 0.5 21.0 24.0 27.0 30.2 33.3 36.5 39.7 42.9 Circular Accessories Plastic cable clamp with strain relief nut for waterprotected (IP65) applications (UTG--ST) Suitable for UTP-UTG Part number UTG10ST UTG12ST UTG14ST UTG16ST UTG18ST UTG20ST UTG22ST UTG24ST Shell size Cable range 10 12 14 16 18 20 22 24 2-6 3-7 6-9 7 - 12 Dia. A 0.5 L 21.0 24.0 27.0 30.2 33.3 36.5 39.7 42.9 9 - 16 13 - 20 1 64 64 69 72 76 80 86 91 Cable clamp has a PG style cable gland. For threading specifications see last page of this section "Circular Metal cable clamp with strain relief (UT0--AC) Suitable for UT0-UT0W Part number Shell size Max cable dia. Excl. sealing O A0.2 B maxi C maxi UT010AC UT012AC UT014AC UT016AC UT018AC UT020AC UT022AC UT024AC 10 12 14 16 18 20 22 24 5.0 8.2 10.0 13.0 16.0 16.0 19.3 20.6 16.3 19.4 22.5 25.8 29.2 32.5 35.7 38.8 21.6 25.0 27.4 29.4 35.2 35.2 41.1 42.4 31.0 31.5 34.0 34.0 31.4 32.0 31.0 31.0 For threading specifications see last page of this section "Circular accessories" 76 Circular Accessories Short cable clamp with strain relief nut for waterprotected applications (IP68). (UT0--JCS) Long cable clamp with strain relief nut for waterprotected applications (IP68). (UT0--JC) Suitable for UT0-UT0W Part number Short version UT010JCS UT012JCS UT014JCS UT016JCS UT018JCS UT020JCS UT022JCS UT024JCS Long version UT010JC UT012JC UT014JC UT016JC UT018JC UT020JC UT022JC UT024JC Shell size 10 12 14 16 18 20 22 24 Clamping range (O en mm) min / max 03 06 06 9.5 9.5 11.5 11.5 11.5 / / / / / / / / 06 10 10 14 14 18 18 18 L 1 Short version 48.5 49.5 53.5 62.5 65.5 70.5 76.5 82.0 Long version 60.5 61.5 67.5 73.5 76.0 84.0 88.0 92.0 Thread A 9/16 - 24 UNEF Class 2A 11/16 - 24 UNEF Class 2A 13/16 - 20 UNEF Class 2A 15/16 - 20 UNEF Class 2A 1'' 1/16 - 18 UNEF Class 2A 1'' 3/16 - 18 UNEF Class 2A 1'' 5/16 - 18 UNEF Class 2A 1'' 7/16 - 18 UNEF Class 2A Cable clamp has a Metric style cable gland. For threading specifications see last page of this section "Circular accessories" Short cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0--JCSL) Long cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0--JCL) Suitable for UT0-UT0W Part number Short version UT010JCSL UT012JCSL UT014JCSL UT016JCSL UT018JCSL UT020JCSL UT022JCSL UT024JCSL Long version UT010JCL UT012JCL UT014JCL UT016JCL UT018JCL UT020JCL UT022JCL UT024JCL Shell size Clamping range (O en mm) min / max 10 12 14 16 18 20 22 24 05 / 08 08 / 12 08 / 12 11.5 / 18 11.5 / 18 15 / 24 15 / 24 15 / 24 L 1 Short version 49.5 49.5 54.5 68.5 71.5 77.5 83.5 89.0 Long version 61.5 62.5 68.5 79.5 82.0 91.0 95.0 99.0 Thread A 9/16 - 24 UNEF Class 2A 11/16 - 24 UNEF Class 2A 13/16 - 20 UNEF Class 2A 15/16 - 20 UNEF Class 2A 1'' 1/16 - 18 UNEF Class 2A 1'' 3/16 - 18 UNEF Class 2A 1'' 5/16 - 18 UNEF Class 2A 1'' 7/16 - 18 UNEF Class 2A Cable clamp has a Metric style cable gland. For threading specifications see last page of this section "Circular accessories" 77 Circular Accessories Short shielded cable clamp with strain relief nut for waterprotected applications (IP68). (UT0S----JCS) Long shielded cable clamp with strain relief nut for waterprotected applications (IP68). (UT0S----JC) Suitable for UT0-UT0W Part number Short version UT0S10JCS UT0S12JCS UT0S14JCS UT0S16JCS UT0S18JCS UT0S20JCS UT0S22JCS UT0S24JCS Long version UT0S10JC UT0S12JC UT0S14JC UT0S16JC UT0S18JC UT0S20JC UT0S22JC UT0S24JC Shell size Clamping range (O en mm) min / max 10 12 14 16 18 20 22 24 04 / 6.5 07 / 10.5 07 / 10.5 10 / 14.5 10 / 14.5 13.5 / 18 13.5 / 18 13.5 / 18 L 1 Short version 58.5 61.5 66.5 72.5 75.5 84.5 90.0 95.5 Long version 70.5 74.5 80.5 83.5 86.0 97.5 101.5 105.5 Thread A 9/16 - 24 UNEF Class 2A 11/16 - 24 UNEF Class 2A 13/16 - 20 UNEF Class 2A 15/16 - 20 UNEF Class 2A 1'' 1/16 - 18 UNEF Class 2A 1'' 3/16 - 18 UNEF Class 2A 1'' 5/16 - 18 UNEF Class 2A 1'' 7/16 - 18 UNEF Class 2A Cable clamp has a Metric style cable gland. For threading specifications see last page of this section "Circular accessories" Short shielded cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0S----JCSL) Long shielded cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0S----JCL) Suitable for UT0-UT0W Part number Short version UT0S10JCSL UT0S12JCSL UT0S14JCSL UT0S16JCSL UT0S18JCSL UT0S20JCSL UT0S22JCSL UT0S24JCSL Long version UT0S10JCL UT0S12JCL UT0S14JCL UT0S16JCL UT0S18JCL UT0S20JCL UT0S22JCL UT0S24JCL Shell size Clamping range (O en mm) min / max 10 12 14 16 18 20 22 24 05 / 8.5 08 / 12.5 08 / 12.5 13.5 / 18 13.5 / 18 17 / 24 17 / 24 17 / 24 L 1 Short version 59.5 61.5 66.5 82.5 85.5 93.0 99.0 104.5 Long version 71.5 74.5 80.5 93.5 96.0 106.5 110.5 114.5 Thread A 9/16 - 24 UNEF Class 2A 11/16 - 24 UNEF Class 2A 13/16 - 20 UNEF Class 2A 15/16 - 20 UNEF Class 2A 1'' 1/16 - 18 UNEF Class 2A 1'' 3/16 - 18 UNEF Class 2A 1'' 5/16 - 18 UNEF Class 2A 1'' 7/16 - 18 UNEF Class 2A Cable clamp has a Metric style cable gland. For threading specifications see last page of this section "Circular accessories" 78 Circular Accessories Metal right angle cable clamp with strain relief nut (UTG--LPGN / UTO--LPGN) Part number For UTP / UTG Part number For UT0 / UT0W Shell size A max B max Cable range UTG10LPGN UT010LPGN 10 48.0 30.0 13.5 x 5 x 8 UTG12LPGN UT012LPGN 12 50.0 33.5 16 x 7 x 10.5 x 13 UTG14LPGN UT014LPGN 14 52.0 36.5 18.5 x 7 x 10.5 x 13 x 16 UTG16LPGN UT016LPGN 16 55.0 39.5 20.5 x 8 x 10.5 x 13 x 16 UTG18LPGN UT018LPGN 18 60.0 46.0 20.5 x 8 x 10.5 x 13 x 16 UTG20LPGN UT020LPGN 20 58.0 47.0 26 x 11 x 15 x 18 x 22 UTG22LPGN UT022LPGN 22 58.0 48.5 26 x 11 x 15 x 18 x 22 UTG24LPGN UT024LPGN 24 67.0 54.5 35 x 19 x 23 x 27 x 31 Cable clamp has a PG style cable gland. For threading specifications see last page of this section "Circular accessories" Metal shrink boot adaptor (UTG--AD) for UTP and UTG Part number Shell size O A0.2 UTG10AD 10 21.0 UTG12AD 12 24.0 UTG14AD 14 27.0 UTG16AD 16 30.0 UTG18AD 18 33.3 UTG20AD 20 36.5 UTG22AD 22 39.7 UTG24AD 24 42.9 Standard plating is anodised black. For tin plating add "T" at the end of the part number e.g. UTG12ADT For threading specifications see last page of this section "Circular accessories" 79 B 19.2 21.5 22.8 21.9 Circular Accessories Metal shrink boot adaptor for UTO and UTOW Part number Shell size O A0.2 10 12 14 16 18 20 22 24 21 24 27 30 33.3 36.5 39.7 42.9 UT010AD UT012AD UT014AD UT016AD UT018AD UT020AD UT022AD UT024AD B 24.7 27 For threading specifications see last page of this section "Circular accessories" Environmental dustcap for plugs (UTG6--DCG) Suitable for UTP-UTG-UT0-UT0W Part number Shell size A max. UTG610DCG 10 20.0 12 14 16 18 20 22 24 24.0 27.5 30.5 33.5 36.5 40.0 43.0 UTG612DCG UTG614DCG UTG616DCG UTG618DCG UTG620DCG UTG622DCG UTG624DCG For dustcap without chain skip "G" e.g. UTG612DC 80 B 20.8 22.5 Circular Accessories Metal environmental dustcap for receptacles (UT0--DCG) Suitable for UTP-UTG-UT0-UT0W Part number UT010DCG UT012DCG UT014DCG UT016DCG UT018DCG UT020DCG UT022DCG UT024DCG For dustcap without chain skip "G" e.g. UTG12DC For jam dustcap consult factory Shell size A max. 10 12 14 16 18 20 22 24 20.8 24.9 28.1 31.3 34.4 37.6 40.8 43.9 Plastic environmental dustcap for receptacles (UTP--DCG) Suitable for UTP-UTG-UT0-UT0W Part number UTP10DCG UTP12DCG UTP14DCG UTP16DCG UTP18DCG UTP20DCG UTP22DCG UTP24DCG For dustcap without chain skip "G" e.g. UTP12DC For jam dustcap consult factory Shell size OA 0.2 B max. 10 26.7 19.3 12 14 16 18 20 22 24 31.4 34.5 37.8 40.8 43.9 47.0 50.1 20.0 81 20.2 21.8 Circular Accessories Sealing for wall mounting receptacle (UTFD1-B) 0,8 0,2 Suitable for UTP-UTG-UT0-UT0W Part number Shell size O F 0.1 R 0.25 S 0.25 UTFD12B 10 15.9 18.3 23.8 UTFD13B UTFD14B UTFD15B UTFD16B UTFD17B UTFD18B UTFD19B 12 14 16 18 20 22 24 19.0 22.2 25.4 28.6 31.8 34.9 38.1 20.6 23.0 24.6 27.0 29.4 31.8 34.9 26.2 28.6 31.0 33.3 36.5 39.7 42.9 OV 3.3 4.0 Adaptors for flexible cable protection systems (conduits) Adaptors for flexible cable protections systems that fit to the TRIM TRIO circular connectors are available from cable protection systems manufacturers (e.g. PMA). 2 solutions are offered: * UNEF Adaptors that fit directly onto the connectors (left picture) * METRIC Adaptors that fit onto the metal cable clamp tubes as indicated on pages 43 and 44 (right picture) These types of adaptors offer extra protection to single wire applications (electrical, coax, Fiber optic ... etc.) Note: the adaptors are not available from Souriau. They must be ordered directly from the manufacturers Cable gland threadings used on cable clamps Shell size 10 12 14 16 18 20 22 24 Thread size on connectors 9/16 - 24 UNEF 11/16 - 24 UNEF 13/16 - 20 UNEF 15/16 - 20 UNEF 1-1/16 - 18 UNEF 1-3/16 - 18 UNEF 1-5/16 - 18 UNEF 1-7/16 - 18 UNEF PG threading PG9 PG11 PG13.5 PG16 PG16 PG21 PG21 PG29 82 Metric threading M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M32 x 1.5 5000 Mating Cycle Plastic Connector MBG SERIES Description The BANTAMATE II cylindrical plastic connector has been designed for use in applications requiring a high number of mating cycles and rapid connections and disconnections. BANTAMATE II meets minimum durability requirements of 5000 mating/unmating cycles by using a unique contact wiping system consisting of a lubricant saturated foam pad bonded to a spring loaded stripper plate within the receptacle or plug. On mating, the stripper plate is pushed deep into the connector wiping a thin film of lubricant onto the male contacts. A distinctive shape provides mating ease in blind or difficult to reach applications. Some typical applications would include test equipment, medical diagnostic equipment, or any of the hardware interconnections found in the modern electronic office. Features and benefits * 5000 mating / unmating cycles * Lubricated male contacts with spring actuated foam plate * Quick and easy installation with latching mechanism * Easy mating due to the positive polarisation, even in blind spots * Unmated male contacts are protected by the spring actuated plate * Available with 4, 12, 19, 30, and 46 contact positions. * Applicable for front or rear panel mounting as well as free hanging applications * UL recognized File nr.: E238675 * CSA certified LR54977 resistance: Test potential: Durability: cycles Vibration resistance: Thermal shock: Humidity: 5000 M min. 2000 VAC Min. 5000 matings 5-50Hz, 0,5 dA; 8 hours axis 5 cycles -55C to +105C 10 days at 85% RH, +85C Connector body and strain relief: Glass filled thermoplast UL94-V0 Colour: black Locking latch Stainless steel, and hook: passivated Compression Spring: Music wire, Nickel plated Lubricating pad: Polyurethane foam Rivet: Brass, Tin plated Strain relief screws: Steel, Cadmium plated Contact accommodation * "MBG" connectors accept TRIM TRIO size 16 removable snap-lock contacts (see contact section) * Contacts to be ordered seperately. Performance characteristics Operating temperature: Insulation Construction -55C to +125C How to order Connector family MBG 12 Insert arrangement: 4, 12, 19, 30, 46 positions Body variation: P: Plug body R: Receptacle body S: Strain relief Design variation: 1: Standard version with male contacts in receptacle 11: Reversed version with male contacts in plug 83 P 1 5000 Mating Cycle Plastic Connector Female plug connector for socket contacts (MBG--P1) - Standard version Male plug connector for pin contacts (MBG--P11) - Reversed version Part number Female plug OA Male plug 0.25 B 0.25 MBG4P1 MBG4P11 15.08 21.90 MBG12P11 19.43 27.25 MBG19P11 22.83 30.53 MBG30P11 27.94 35.51 MBG46P1 34.42 41.91 MBG12P1 MBG19P1 MBG30P1 MBG46P1 Panel mounting male receptacle connector for pin contacts (MBG--R1) - Standard version Panel mounting female receptacle connector for socket contacts (MBG--R11) - Reversed version Part number Male receptacle Female receptacle O A 0.25 B max. MBG4R11 23.90 18.08 31.45 37.36 20.07 29.46 MBG12R11 32.49 26.54 30.76 36.86 24.64 34.93 MBG19R11 32.44 26.54 34.04 40.13 27.86 38.10 MBG30R11 35.61 28.65 38.00 44.91 33.10 43.31 MBG46R11 42.24 35.13 84 46.94 54.05 39.70 49.61 C 0.18 D 0.30 OE 0.18 F max. MBG4R1 MBG12R1 MBG19R1 MBG30R1 MBG46R1 5000 Mating Cycle Plastic Connector Strain relief (MBG--S1) Part number O-C O-D E F Cable range O G side A Cable range O G side B MBG4S1 MBG12S1 MBG19S1 MBG30S1 MBG30S2 MBG46S1 12.2 18.8 21.3 26.7 26.7 15.0 21.1 24.4 29.0 29.0 20.1 26.4 29.0 34.5 34.5 Not available 5.3 7.9 9.4 16.3 15.9 8.51/6.35 11.30/7.65 13.08/8.66 19.02/15.88 12.67/10.01 - 14.99/11.38 17.53/13.12 22.86/19.05 15.85/12.70 Insert arrangements and moulded-in contact identification Contact identification positions shown are for mating face of plug and wiring face of receptacle. 85 5000 Mating Cycle Plastic Connector Panel cut-out dimensions for receptacle - Standard version (MBG--R1) Part number Fig. J K L MBG4R1 1 MBG12R1 MBG19R1 MBG30R1 MBG46R1 2 2 2 2 M N 20.86 27.41 25.30 28.50 33.73 40.36 32.74 35.89 40.97 47.22 18.08 31.45 10.16 26.54 30.76 34.04 38.00 46.94 11.65 13.32 15.49 18.85 M N 28.65 35.13 Panel cut-out dimensions for receptacle - Reversed version (MBG--R11) Part number Fig. J K L MBG4R11 1 MBG12R11 MBG19R11 MBG30R11 MBG46R11 2 2 2 2 20.86 27.41 18.08 31.45 10.16 25.30 28.50 33.73 40.36 32.74 35.89 40.97 47.22 26.54 30.76 34.04 38.00 46.94 11.65 13.32 15.49 18.85 86 28.65 35.13 Rectangular Overview rectangular TRIM TRIO connectors Rectangular TRIM TRIO connectors are a wide and versatile range that are offered in many options from low cost plastic to top class metal solutions. This section gives an overview on available rectangular connectors for: 1. Connectors with jackscrew locking using size 16 contacts (1.6mm). - MSM - High performance cable connectors. - MS0 - High performance boardmount connectors. - V.35 - DTE/DCE interface connectors. 2. Connectors with lever locking using size 16 contacts (1.6mm). - MSG - low profile version. - MB - Robust version. 3. Connectors with quick mating feature using size 16 contacts (1.6mm). - SMS - Cable connectors. - SMS - Boardmount connectors. - SMS - Low profile pinheader cable and boardmount connectors. 4. Mixed power / signal + heavy duty and drawer connectors using size 16 contacts (1.6mm). - A range of connectors with contact arrangements offered with a mix of signal and power contacts up to 26 A. - Robust heavy duty connectors. - Drawer connector. 87 Rectangular Notes 88 High Performance Hyfen Rectangular Cable Connectors MS-M SERIES Description MSM rectangular connectors offers an extremely reliable, rugged, and versatile connection system . They are a range of multiway connectors available in 9 sizes from 9 to 75 positions. MS-M cable connectors can be offered with a full range of hardware and accessories. Guiding pins and sockets, turnable jackscrews, a variety of cable hoods, pin protection shrouds and discrimination pins make this connector range a truly versatile system. Features and benefits * Connectors supplied pre-assembled except for panel mount versions. * Available in 14-20-26-34-42-50-75 and 104 positions. * 34 contact positions suitable for V.35 applications (see V.35 section) * Full range of accessories available including hoods, strain relief clamps, guide pins, jackscrews and pin protection shrouds. * MS-M hyfen complies with NFC 93426 - HE 621-622 and MIL-C-28748 specifications. * UL recognized File Nr.: E238675 Insulation resistance: Test potential: Durability: Vibration resistance Shock: Hoods: Aluminium alloy gold chromate or anodized Polyamide 6.6 - black - UL94-V2 Cable clamps: Stainless steel Polarizing hardware: Brass nickel plated Shrouds: Aluminium alloy gold chromate or anodized 5000 M min. 2000 VAC 500 matings and unmatings. Per MIL-STD 202 method 204 Per MIL-C-STD 202 method 207 Contact accommodation Construction Connector Material : Glass filled Phenolic Flammability rating : UL94-V0 * "MS-M" Hyfen connectors accept TRIM TRIO size 16 removable snap-lock contacts (see contact section) * Contacts to be ordered seperately. Performance characteristics Operating temperature: -55C to +125C How to order Connector family MS MS Contact arrangement Type of housing: P: plug body for male contacts R: Receptacle housing for female contacts N 16 contact Design variation Pin protection shroud GE = plastic turnable jackscrews Code for special variations 89 34 34 P P M M 124 120 S S- GE -- 16 -- High Performance Hyfen Rectangular Cable Connectors Contact arrangement The contact position identification letters or numbers shown in the above diagrams apply to MS-M plug and receptacle connectors. Dimensionally, corresponding types of plug and receptacle mouldings are the same and differ only in that the contact position lettering/numbering of the plug (MS-PM) is a mirror image of that of the receptacle (MS-RM). Note that pins and/or sockets can be used in either the plug or receptacle moulding. Note: Contact identification is shown for wiring face of the receptacle and mating face at plug connector. 90 High Performance Hyfen Rectangular Cable Connectors Panel mount connectors with guiding hardware (MS--M1GE00) Connector size 9 14 18 20 26 34 42 50 75 Part number Plug version for male contacts MS9PM1GE00 MS14PM1(*)GE00 MS18PM1GE00 MS20PM1(*)GE00 MS26PM1(*)GE00 MS34PM1(*)GE00 MS42PM1(*)GE00 MS50PM1(*)GE00 MS75PM1(*)GE00 Receptacle version for female contacts MS9RM1GE00 MS14RM1(*)GE00 MS18RM1GE00 MS20RM1(*)GE00 MS26RM1(*)GE00 MS34RM1(*)GE00 MS42RM1(*)GE00 MS50RM1(*)GE00 MS75RM1(*)GE00 A B D E 25.4 23.8 25.4 31.75 33.3 42.8 50.55 33.3 31.8 33.3 39.65 41.3 50.8 58.65 20.5 20.1 20.5 27.95 27.2 35.7 42.95 9.5 11.7 14.2 11.7 15.0 57.95 65.85 50.85 Fig. 1-2 19.05 18.95 28.1 1-3 Fig. (*) Complete part number with "S" for connector with protective shroud. Panel mount connectors with fixed jackscrew hardware (MS--M58GE00) Connector size 9 14 18 20 26 34 42 50 75 Part number Plug version for male contacts MS9PM58GE00 MS14PM58(*)GE00 MS18PM58GE00 MS20PM58(*)GE00 MS26PM58(*)GE00 MS34PM58(*)GE00 MS42PM58(*)GE00 MS50PM58(*)GE00 MS75PM58(*)GE00 Receptacle version for female contacts MS9RM58GE00 MS14RM58(*)GE00 MS18RM58GE00 MS20RM58(*)GE00 MS26RM58(*)GE00 MS34RM58(*)GE00 MS42RM58(*)GE00 MS50RM58(*)GE00 MS75RM58(*)GE00 (*) Complete part number with "S" for connector with protective shroud. 91 A B D E 25.4 23.8 25.4 31.75 33.3 42.8 50.55 33.3 31.8 33.3 39.65 41.3 50.8 58.65 20.5 20.1 20.5 27.95 27.2 35.7 42.95 9.5 11.7 14.2 11.7 15.0 57.95 65.85 50.85 1-2 19.05 18.95 28.1 1-3 High Performance Hyfen Rectangular Cable Connectors MS34 Cable connector with 1 piece metal suitcase hood (MS34--MEHM) Part number Plug version for male contacts Receptacle version for female contacts MS34PMEHM MS34PMSEHM MS34PMEHMMET1 MS34RMEHM MS34RMSEHM MS34RMEHMMET1 Description Anodised hood, plastic strain relief and turnable hardware. Shielded version with nickel plated hood, metal strain relief and turnable hardware Version with spring loaded jackscrews (*) Complete part number with "S" for connector with protective shroud. Cable connector with Alu die cast hood (MS-M157GE00) Part number Connector size Plug version for male contacts Receptacle version for female contacts A B C D E max. F Fig. 50 75 MS50PM157GE00 MS75PM157GE00 MS50RM157GE00 MS75RM157GE00 57.95 57.95 65.85 65.85 73.0 73.0 56.0 56.0 20.0 25.0 22.2 31.2 1-2 1-3 (*) Complete part number with "S" for connector with protective shroud. 92 High Performance Hyfen Rectangular Cable Connectors Cable connector without strain relief and turnable jackscrew hardware (MS-M007GE00) Connector size 9 14 18 20 26 34 42 50 75 Plug version for male contacts MS9PM007GE00 MS14PM007(*)GE00 MS18PM007GE00 MS20PM007(*)GE00 MS26PM007(*)GE00 MS34PM007(*)GE00 MS42PM007(*)GE00 MS50PM007(*)GE00 MS75PM007(*)GE00 Receptacle version for female contacts MS9RM007GE00 MS14RM007(*)GE00 MS18RM007GE00 MS20RM007(*)GE00 MS26RM007(*)GE00 MS34RM007(*)GE00 MS42RM007(*)GE00 MS50RM007(*)GE00 MS75RM007(*)GE00 A B D E Fig. 25.4 23.8 25.4 31.75 33.3 42.8 50.55 33.3 31.8 33.3 39.65 41.3 50.8 58.65 20.5 20.1 20.5 27.95 27.2 35.7 42.95 9.5 11.7 14.2 11.7 15.0 57.95 65.85 50.85 1-2 19.05 18.95 28.1 1-3 (*) Complete part number with "S" for connector with protective shroud. Cable connector with metal butterfly hood and guiding hardware (MS--M120GE00) Connector size 34 Part number Plug version for male contacts Receptacle version for female contacts A B E G max. H S max. R max. Fig. MS34PM120(*)GE00 MS34RM120(*)GE00 42.8 50.8 19.05 22.2 56.7 10 13 1-2 (*) Complete part number with "S" for connector with protective shroud. 93 High Performance Hyfen Rectangular Cable Connectors Notes 94 High Performance Rectangular Boardmount Connectors MSO SERIES Description The MSO series, derived from the MSM series, is for straight or right-angled application on a printed circuit board. Pre-assembled MSO connectors with pin or socket N(16 contacts are intermateable with the existing MSM rectangular cable connectors. The N 16 TRIM TRIO .0625" (1.6mm) diameter contacts are available in either solid machined or stamped and formed versions. The polarizing hardware can be delivered in either guiding or jackscrew versions. Features and benefits * Connectors supplied pre-assembled with dip solder contacts. * Contacts available in solid machined or stamped and formed version. * Available in 9-18-34-50-75 positions. * For right-angled versions, there is a choice of 9-18 and 34 contact positions. * 34 contact positions suitable for V.35 applications (see section V.35) * Polarising hardware prevent mismating. * UL94-V0 rated thermoplast. Construction Intermateability Connector Material : Glass filled polysulfone Flammability rating : UL94-V0 Polarizing hardware: Brass nickel plated Contacts: High conductive copper alloy * "MSO" with pre-assembled contacts are intermateable with the "MSM" rectangular cable connectors equipped with TRIM TRIO crimp-type removable snap-lock contacts. Performance characteristics Operating temperature: -55C to +125C Current rating: 5 Amp for stamped contacts 7.5 Amp for machined contacts Contact resistance: 3 m Insulation resistance: 5000 M min. Test potential: 2000 VAC Durability: 500 matings and unmatings. Plating table Plating for solid machined contacts: No digit (std) = Min. 0.4 Gold all over, over Nickel. T = 3 - 5 Tin all over Plating for Stamped and formed contacts : K9 (std) = Min. 0.4 Gold in contact area, 3 - 5 SnPb on solder tail. T = 3 - 5 Tin all over How to order Connector family MSO Contact arrangement N 16 contacts Type of housing P: R: Plug body with male contacts Receptacle body with female contacts Contact termination K: G: straight dipsolder Right angle dipsolder Type of hardware 1: 58: Guide pin and socket Threaded jackscrew pin and socket Design variation E1: Solid machined contacts SE1: stamped and formed contacts Plating indication 95 34 M R G 58 SE1 K9 High Performance Rectangular Boardmount Connectors Straight boardmount with guiding hardware (MSO--M-K1--) Part number connector size 9 18 34 50 75 Version with solid machined contacts male MSO9MPK1E1 MSO18MPK1E1 MSO34MPK1E1 MSO50MPK1E1 MSO75MPK1E1 Version with stamped and formed contacts female MSO9MRK1E1 MSO18MRK1E1 MSO34MRK1E1 MSO50MRK1E1 MSO75MRK1E1 For other platings: See plating table. male MSO9MPK1SE1K9 MSO18MPK1SE1K9 MSO34MPK1SE1K9 MSO50MPK1SE1K9 MSO75MPK1SE1K9 female MSO9MRK1SE1K9 MSO18MRK1SE1K9 MSO34MRK1SE1K9 MSO50MRK1SE1K9 MSO75MRK1SE1K9 Other solder tail lengths on request A B C 9.5 15.2 19.0 18.9 19.4 33.3 25.4 50.8 65.8 42.8 57.9 Selective loading on request Straight boardmount with jackscrew hardware (MSO--M-K58--) Part number connector size 9 18 34 50 75 Version with solid machined contacts male MSO9MPK58E1 MSO18MPK58E1 MSO34MPK58E1 MSO50MPK58E1 MSO75MPK58E1 For other platings: See plating table. Version with stamped and formed contacts female MSO9MRK58E1 MSO18MRK58E1 MSO34MRK58E1 MSO50MRK58E1 MSO75MRK58E1 male MSO9MPK58SE1K9 MSO18MPK58SE1K9 MSO34MPK58SE1K9 MSO50MPK58SE1K9 MSO75MPK58SE1K9 female MSO9MRK58SE1K9 MSO18MRK58SE1K9 MSO34MRK58SE1K9 MSO50MRK58SE1K9 MSO75MRK58SE1K9 Other solder tail lengths on request 96 A B C 9.5 15.2 19.0 18.9 19.4 33.3 25.4 50.8 65.8 42.8 57.9 Selective loading on request High Performance Rectangular Boardmount Connectors Right angle boardmount with guiding hardware (MSO--M-G1--) Part number connector size 9 18 34 Version with solid machined contacts male MSO9MPG1E1 MSO18MPG1E1 MSO34MPG1E1 Version with stamped and formed contacts female MSO9MRG1E1 MSO18MRG1E1 MSO34MRG1E1 For other platings: See plating table. male A B C D E F 33.3 23.0 38.0 10.0 25.4 50.8 19.3 55.5 16.0 18.0 20.5 10.5 42.8 female MSO34MPG1SE1K9 MSO34MRG1SE1K9 Other solder tail lengths on request Selective loading on request Right angle boardmount with jackscrew hardware (MSO--M-G58--) Part number connector size 9 18 34 Version with solid machined contacts male MSO9MPG58E1 MSO18MPG58E1 MSO34MPG58E1 female MSO9MRG58E1 MSO18MRG58E1 MSO34MRG58E1 For other platings: See plating table. Version with stamped and formed contacts male A B C D E F 33.3 23.0 38.0 10.0 25.4 50.8 19.3 55.5 16.0 18.0 20.5 10.5 42.8 female MSO34MPG58SE1K9 MSO34MRG58SE1K9 Other solder tail lengths on request 97 Selective loading on request High Performance Rectangular Boardmount Connectors MSO recommended drilling hole pattern Size 9 Size 18 98 High Performance Rectangular Boardmount Connectors MSO recommended drilling hole pattern Size 34 Size 50 Size 75 99 High Performance Rectangular Boardmount Connectors Notes 100 V.35 - Interface connectors V.35 DTE/DCE Interface connectors Description The Telecommunications Standardization Sector TSS V.35, formerly CCITT V.35 is the international standard termed "Data Transmission at 48 Kbps using 60108 Khz Group-Band Circuits. It makes use of a 34 contact connection system specially designed to be used for DTE/ DCE that interface to high speed digital carriers found in computer, modem and telecommunication industries. Being part of the TRIM TRIO wide range of high reliable rectangular connectors, MSO34 (boardmount connectors) and MS34 (cable connectors) are in complete compliance to this specification. To meet this specification, insulators have been manufactured with 34 contact positions which can be loaded with the international accepted N 16 TRIM TRIO .0625" (1.6mm) diameter contacts. The boardmount connectors (MSO34) are available in straight and right angle versions equipped with either solid machined or stamped and formed male / female contacts. The cable connectors (MS34) can be offered with a full range of hardware and accessories. Guiding pins and sockets, turnable jackscrew system, different cable hoods with strain relief, pin protection shrouds and discrimination pins make this connector range as complete as possible. Features and benefits * Complete compliance with International Standards of ISO 2593 for TTS V.35 (formerly CCITT V.35) interfacing. * In compliance with NFC 93426 - HE621622 and MIL-C-28748 specifications. * UL recognised. * UL94-V0 rated thermoplastic * Boardmount connectors supplied preassembled with dipsolder contacts in either: - Male or female contacts. - Machined or stamped and formed contacts - Straight or right angle * Stamped and formed contacts have selective tin plating on solder tails, thus eliminating extra flux operations. * Selective loading possible on request. * Right angle version equipped with true position location wafer. * Hold-down feature available Intermateability All the references mentioned are perfectly intermateable, provided that 1 mated pair exists out of a plug half and a receptacle half. Mated pairs can be made for following applications: - Cable to cable - Cable to panel - Cable to straight or right-angled boardmount Technical data on MSO34 PC-Boardmount connectors Technical data on MS34 Cable connectors Performance characteristics Performance characteristics Operating temperature: Current rating: Operating temperature: Insulation resistatance: Test potential: Durability: -55C to +125C 5 Amp for stamped contacts 7.5 Amp for machined contacts Contact resistance: 3m Insulation resistance: 5000 M min. Test potential: 2000 VAC Durability: 500 matings and unmatings. Plating table Plating for solid machined contacts: No digit (std) = Min. 0.4 Gold all over, over Nickel. T = 3 - 5 Tin all over Plating for Stamped and formed contacts : K9 (std) = Min. 0.4 Gold in contact area, 3 - 5 SnPb on solder tail. T = 3 - 5 Tin all over Construction Material : Glass-reinforced thermoplastic Flammability rating : UL94-V0 Polarising hardware: Brass nickel plated Contacts: High conductive copper alloy 101 Vibration resistance: Shock: -55C to +125C 5000 M min. 2000 VAC 500 matings and unmatings. Per MIL-STD 202 method 204 Per MIL-STD 202 method 207 Contact accommodation * "MS" Cable connectors accept TRIM TRIO size 16 removable snap-lock contacts (see contact section) * Contacts to be ordered separately Construction Connector body: Glass-reinforced Phenolic Flammability rating : UL94-V0 Cable hoods: Aluminium alloy or Polyamide 6.6 Cable clamps: Stainless steel Protection Shrouds: Aluminium alloy Polarising hardware: Brass nickel plated V.35 - Interface connectors How to order Connector family MSO Contact arrangement N 16 contacts Type of housing P: Plug body with male contacts R: Receptacle body with female contacts Contact termination K: straight dipsolder G: Right angle dipsolder H: Reversed version Type of hardware 1: Guide pin and socket 58: Threaded jackscrew pin and socket Design variation E1: Solid machined contacts SE1: Stamped and formed contacts SL1: Metal bracket SEH1: Hold down rivets Plating indication MS034 recommended drilling hole pattern Size 34 102 34 M R G 58 SE1 K9 V.35 - Interface connectors MSO34 Straight boardmount connectors Part number Version with Version with solid machined contacts stamped and formed contacts Description MSO34MPK1E1 MSO34MPK1SE1K9 Guide pin, guide socket and male contacts MSO34MRK1E1 MSO34MRK1SE1K9 Guide pin, guide socket and female contacts MSO34MPK58E1 MSO34MPK58SE1K9 Jackscrew pin, jackscrew socket and male contacts MSO34MRK58E1 MSO34MRK58SE1K9 Jackscrew pin, jackscrew socket and female contacts For other platings: See plating table Other solder tail lengths on request Selective loading on request MSO34 Right-angled boardmount connectors Part number Version with Version with solid machined contacts stamped and formed contacts Description MSO34MPG1E(*)1 MSO34MPG1SE(*)1K9 Guide pin, guide socket and male contacts MSO34MRG1E(*)1 MSO34MRG1SE(*)1K9 Guide pin, guide socket and female contacts MSO34MPG58E(*)1 MSO34MPG58SE(*)1K9 Jackscrew pin, jackscrew socket and male contacts MSO34MRG58E(*)1 MSO34MRG58SE(*)1K9 Jackscrew pin, jackscrew socket and female contacts For other platings: See plating table Other solder tail lengths on request (*) Complete part number with "H" for connector with hold down rivets 103 Selective loading on request V.35 - Interface connectors MSO34 Right-angled boardmount connectors - Standard version with metal brackets Part number Version with stamped and formed contacts Description MSO34MPG1SL1K9 Guide pin, guide socket and male contacts MSO34MRG1SL1K9 Guide pin, guide socket and female contacts MSO34MPG58SL1K9 Jackscrew pin, jackscrew socket and male contacts MSO34MRG58SL1K9 Jackscrew pin, jackscrew socket and female contacts For other platings: See plating table Other solder tail lengths on request Selective loading on request MSO34 Right-angled boardmount connectors - Reversed version with metal brackets Part number Version with stamped and formed contacts Description MSO34MPH1SL1K9 Guide pin, guide socket and male contacts MSO34MRH1SL1K9 Guide pin, guide socket and female contacts MSO34MPH58SL1K9 Jackscrew pin, jackscrew socket and male contacts MSO34MRH58SL1K9 Jackscrew pin, jackscrew socket and female contacts For other platings: See plating table Other solder tail lengths on request 104 Selective loading on request V.35 - Interface connectors MS34 Cable connectors with metal butterfly hood Part number Version with male contacts Version with female contacts Description MS34PM120(*)GE00 MS34RM120(*)GE00 Guide pin, guide socket and butterfly hood. MS34PM140(*)GE00 MS34RM140(*)GE00 Jackscrew pin , jackscrew socket and butterfly hood. MS34PM124(*)GE00 MS34RM124(*)GE00 Turnable jackscrew pin, turnable jackscrew socket and butterfly hood. MS34PM1(*)GE00 MS34RM1(*)GE00 Guide pin and guide socket. No strain relief hood MS34PM58(*)GE00 MS34RM58(*)GE00 Jackscrew pin and jackscrew socket. No strain relief hood. MS34PM007(*)GE00 MS34RM007(*)GE00 Turnable jackscrew pin and turnable jackscrew socket. No strain relief hood. (*) Complete catalogue number with " S " for connector with protective shroud. MS34 Cable connectors with cable clamp Part number Version with male contacts Version with female contacts Description MS34PM117(*)GE00 MS34RM117(*)GE00 Guide pin, guide socket and cable clamp MS34PM127(*)GE00 MS34RM127(*)GE00 Jackscrew pin, jackscrew socket and cable clamp MS34PM107(*)GE10 MS34RM107(*)GE10 Turnable jackscrew pin, turnable jackscrew socket and cable clamp. (*) Complete catalogue number with "S" for connector with protective shroud. 105 V.35 - Interface connectors MS34 Cable connectors with metal suitcase hood Part number Version with male contacts Version with female contacts Description MS34PMEHM(*) MS34RMEHM(*) Anodised hood, plastic strain relief and turnable hardware. MS34PMSEHM(*) MS34RMSEHM(*) Shielded version with nickel plated hood, metal strain relief and MS34PMEHMMET1 MS34RMEHMMET1 turnable hardware. Version with spring loaded jackscrews (*) Complete catalogue number with " S " for connector with protective shroud. MS34 Cable connectors with plastic suitcase hood Part number Version with male contacts Version with female contacts Description MS34PMEH2(*) MS34RMEH2(*) Guide pin, guide socket and plastic suitcase hood. MS34PMEH3(*) MS34RMEH3(*) Jackscrew pin, jackscrew socket and plastic suitcase hood. MS34PMEH0(*) MS34RMEH0(*) Turnable jackscrew pin, turnable jackscrew socket and plastic suitcase hood. (*) Complete catalogue number with "S" for connector with protective shroud. 106 High Performance Low Profile Rectangular Connectors MSG SERIES Description MSG Series connectors is a 50 and 59 position low profile, compact design rectangular I/O connector. MSG has been developed for industrial and railway control equipments which require a easy handling and high density connector. In addition to its panel mount version, a PCB mount version has been especially designed to fit 19 inch Euro-rack system. Features and benefits * Connectors supplied pre-assembled. * Available in 50 and 59 contact versions. * PCB mount version fully equipped with male contacts. Selective contact loading optional. * Accessories : polarizing screws (receptacle) polarizing plate (plug) dust cap (plug) Performance characteristics Operating temperature: Insulation resistance: -55C to +125C 5000 M min. Test potential: Current rating: Creepage distance: Durability: Vibration Salt Spray: 2000 VAC 7.5A - cable to PCB 13A - cable to cable 2.5mm (50 positions) 2.2mm (59 positions) 500 matings and unmatings. Per JIS-C STD 0040 Per JIS-C STD 0023 Construction Connector Material : Glass filled thermoplast Flammability rating : UL94-V0 Hoods, skirts : Steel, nickel plated Cable clamps: Steel, nickel plated Guiding hardware: Stainless steel Contacts receptacle : Copper alloy (Au over Ni) Contact accommodation * "MSG" Rectangular connectors accept TRIM TRIO size 16 crimp-type removable contacts (see contact section) * For the plug connector and the panel mount receptacle, contacts have to be ordered separately. How to order Number of contacts 59 Part number Description MSG59P-L11 Plug for cable up MSG59P-L21 Plug for cable down MSG59R-PL110 Panel mount receptacle MSG59R-RL111 Right angle PCB mount receptacle without flange MSG59R-FL111 Right angle PCB mount receptacle with flange MSG50P-L11 Cable plug MSG50RG-L111 Right angle PCB mount receptacle with flange 50 107 High Performance Low Profile Rectangular Connectors Plug connector with metal hood (MSG59P-L11) Panel mount receptacle (MSG59RP-L110) 108 High Performance Low Profile Rectangular Connectors Right angle PCB mount receptacle without flange (MSG59RR-L111) Right angle PCB mount receptacle with flange (MSG59RF-L111) 109 High Performance Low Profile Rectangular Connectors MSG59 recommended drilling hole pattern (for PCB) (MSG59RR-L111, MSG59RF-L111) MSG59 recommended panel cut-out (front mount) (MSG59RR-L110) MSG59 recommended for front mount (MSG59RR-L111, MSG59RF-L111) Polarizing hardware Receptacle side Plug side 110 High Performance Low Profile Rectangular Connectors (MSG50P-L11) (MSG50RF-L111) 111 High Performance Low Profile Rectangular Connectors (MSG50RF-L111) (MSG50RF-L111) 112 Robust Lever Locking Connector MB SERIES Description * 52 contact, rectangular, one action lever locking connector * Same receptacle can be front or rear mounted * 2 cable clamp orientations available: perpendicular or parallel to mating face * Anti Jack knife system, guide plate on plug and wide entry docket contact for a smooth and reliable mating * Adapted to shielded cable * Easy assembly Application * Signalling Mechanical * * * * * * Hood: Steel, Nickel plated Lever: stainless steel Grip and insulator: glass filled PBT Contact body: copper Contact plating: consult us Endurance: 500 mating/unmating operations * Vibration: per JIS C 0040 Electrical Environmental * * * * * Temperature range: -55C + 125C * Flammability rating: UL94V0 Withstanding voltage 2000 Veff Insulation resistance: 5000M Current rating: 13A Contact accommodation: standard TRIM TRIO size 16 contacts How to order Receptacle Basic series Number of contacts MB 52 R -L 1 1 0 MB 52 P -L 1 1 0 52 Receptacle: Lever type: Contact type: 1: TRIM TRIO contact Cable clamp: 1: Lever down; 2: Lever up Variation: 0: contacts to be ordered separately Plug Basic series Number of contacts 52 Plug Lever Cable clamp: 1: Lever down; 2: Lever up Cable direction 1: Parallel; 2: Perpendicular to mating face Variation 0 113 Robust Lever Locking Connector Dimensions Plug MB52P-L120 Receptacle MB52R-L110 31 0,2 20 0,2 Panel cut 114 85 0,2 88,1 0,2 95,5 0,2 Rear mount Front mount Plastic Panel and Cable Connectors SMS - QIKMATE SERIES Description The versatile " SMS " Qikmate panel and cable connectors are a highly costeffective system approach to solving the constant demand for more cost effective interconnection techniques. It is a range of multiway connectors using N 16 TRIM TRIO .0625" (1.6mm) diameter contacts and available in 10 contact arrangements from 2 to 36 positions. Having no additional hardware, Panel receptacle connectors snap and lock into panel cutouts and cable plugs quick connect and disconnect with positive retention locks. Cable plug connectors also feature pinprotection skirts, positive polarisation and can be supplied with or without integrated strain relief hoods. Cable receptacle connectors (only with integrated strain relief hoods) are developed to mate with cable plug connectors thus offering solutions for cable to cable applications. Features and benefits temperature: Insulation resistance: Test potential: Durability: -55C to +105C 5000 M min. 2000 VAC 500 matings and unmatings. Construction Material : Polyamide 6.6 Flammability rating : UL94-V2 Contact accommodation * Available in 10 contact arrangements. * Self mountable panel receptacle with positive housing retention. * Cable plugs with retaining latches for positive locking. * Cable plug has pin protection skirt to prevent damage of male contacts * Positive polarization keys prevent mismating. * Cable plug and receptacle have integrated strain relief hood which can take a wide range of cables. * Cable plug and receptacle have discrimination cavities in between contact cavities, thus offering discrimination without contact loss. * UL recognized File Nr.: E238675 * "SMS" Qikmate connectors accept TRIM TRIO size 16 removable snap-lock contacts (see contact section) * Contacts to be ordered seperately. Performance characteristics Operating How to order Connector family SMS SMS Contact arrangement Body variation: R1: P1: PDH1: RDH1: Panel mount receptacle Cable plug without strain relief hood Cable plug with integrated strain relief hood Cable receptacle with integrated strain relief hood 115 12 12 PDH1 P1 Plastic Panel and Cable Connectors Contact arrangements for cable plug connectors (SMS--P1 and SMS--PDH1) Contact identifications shown are for mating face. Contact identifications of wiring face are identical as shown on the receptacle arrangements 116 Plastic Panel and Cable Connectors Contact arrangements for cable and panel mount receptacle connectors (SMS--R1 and SMS--RDH1) Contact identifications shown are for mating face. Contact identifications of wiring face are identical as shown on the plug arrangements 117 Plastic Panel and Cable Connectors SMS - Standard Qikmate intermateability chart ( O N LY I N S I Z E S 3, 6, 12 AN D 18) 118 Plastic Panel and Cable Connectors Panel mount receptacle (SMS--R1) 0,75 2,3 Part number SMS2R1 SMS3R1 SMS4R1 SMS6R1 SMS9R1 SMS12R1 SMS15R1 SMS18R1 SMS24R1 SMS36R1 Number of contact pos. A 2 11.0 3 4 6 9 12 15 18 24 36 16.2 21.2 B C max. 5.8 15.2 10.9 16.0 21.1 26.2 31.2 20.3 25.4 30.5 35.6 40.6 21.1 30.5 J 0.13 SMS2P1 SMS3P1 SMS4P1 SMS6P1 SMS9P1 SMS12P1 SMS15P1 SMS18P1 SMS24P1 SMS36P1 0.13 11.4 16.2 21.2 46.6 16.5 21.7 16.5 11.6 16.7 21.6 26.7 31.8 36.9 16.7 21.7 47.1 26.7 Cable plug without strain relief hood (SMS--P1) Part number K Number of contact pos. A C max. 2 3 4 6 9 12 15 18 24 36 15.0 18.6 23.7 17.8 18.6 22.9 27.9 33.0 38.1 43.2 23.7 49.1 119 33.0 Plastic Panel and Cable Connectors Cable receptacle with integrated strain relief hood ( SMS--RDH1 ) Part number contact SMS2RDH1 SMS3RDH1 SMS4RDH1 SMS6RDH1 SMS9RDH1 SMS12RDH1 SMS15RDH1 SMS18RDH1 SMS24RDH1 SMS36RDH1 Number of Number of disrimipos. nation pos. 2 3 4 6 9 12 15 18 24 36 0 0 0 2 4 6 8 10 15 24 A B C D H Cable 64.8 69.0 74.4 72.6 75.3 72.0 81.3 11.1 16.2 21.2 90.4 128.0 21.2 46.6 57.2 63.3 0.5 - 8.4 0.8 - 7.3 1.5 - 10.0 1.7 - 9.2 3.9 - 14.3 4.0 - 15.0 5.0 - 16.2 5.8 - 20.3 7.1 - 20.4 8.8 - 24.5 C D H Cable 64.8 69.0 74.4 72.6 75.3 72.0 81.3 14.1 18.6 23.7 90.4 128.0 23.7 49.1 range 31.6 35.1 38.2 34.6 35.8 38.1 35.9 36.1 39.7 54.6 9.9 15.0 20.0 25.1 30.2 35.3 25.1 16.2 49..2 50.9 52.2 52.7 55.2 Recommended unirap cable tie TF4D TF5D Cable plug with integrated strain relief hood ( SMS--PDH1 ) Part number contact SMS2PDH1 SMS3PDH1 SMS4PDH1 SMS6PDH1 SMS9PDH1 SMS12PDH1 SMS15PDH1 SMS18PDH1 SMS24PDH1 SMS36PDH1 Number of Number of disrimipos. nation pos. 2 3 4 6 9 12 15 18 24 36 0 0 0 2 4 6 8 10 15 24 A B range 39.5 43.0 46.1 42.5 43.7 46.0 43.8 44.0 47.6 62.5 16.4 21.5 26.7 31.7 36.7 41.8 31.7 120 18.6 57.1 58.8 60.1 60.6 63.1 65.1 71.2 0.5 - 8.4 0.8 - 7.3 1.5 - 10.0 1.7 - 9.2 3.9 - 14.3 4.0 - 15.0 5.0 - 16.2 5.8 - 20.3 7.1 - 20.4 8.8 - 24.5 Recommended unirap cable tie TF4D TF5D Plastic Panel and Cable Connectors Accessories for standard Qikmate connectors Pin protection shroud for panel mount receptacle (SMS--CSB1) When pins are inserted into the panelmount receptacle half (SMS--R1) of the QIKMATE connector, an optional pin protection shroud can be installed. The shroud is mounted at the same time as the receptacle by holding the shroud against the mating side of the panel with both cutouts lined up. The receptacle is then inserted in place, trapping the shroud between the receptacle and panel. The use of the pin protection shroud reduces the allowable thickness of the panel from 2.3 to 1.6 mm max. Part number Number of contact positions A B SMS2CSB1 SMS3CSB1 SMS4CSB1 SMS6CSB1 SMS9CSB1 SMS12CSB1 SMS15CSB1 SMS18CSB1 SMS24CSB1 SMS36CSB1 2 3 4 6 9 12 15 18 24 36 19.8 23.4 28.4 18.8 23.4 23.9 29.0 34.0 39.1 44.2 28.4 54.1 34.0 Strain relief hoods (SMS--H1) Separate strain relief hoods are available for all standard plugs SMS--P1. The hoods consist of identical halves that snap into position on the plug and are secured in place with the cable tie drawn tightly around the cabe entry collar. Catalog numbers designate a complete hood (2 halves) SMS--H1 The cable tie is not included (TF4D - TF5D) Two three and four position hoods are single piece units Discrimination pins For discrimination pins on both standard Qikmate and Qikmate Pin Headers cable and boardmount: See accessories section. 121 Plastic Panel and Cable Connectors Notes 122 Plastic PC Boardmount Connectors SMS - BOARDMOUNT QIKMATE SERIES Description These PC boardmount connectors enable QIKMATE and preassembled TRIM TRIO contacts to be PC board mounted, using conventional solder production techniques. They will then mate and latch with the standard QIKMATE plugs. Straight boardmount QIKMATE is available in 10 insert arrangements from 2 to 36 positions. Right-angled boardmount QIKMATE is available in 3, 6, 12 and 18 positions. All boardmount connectors are supplied fully loaded with pin or socket contacts, either in solid machined or stamped and formed contacts. Stamped and formed contact have selective tin plating on the solder tails, thus eliminating flux operations. Features and benefits * Straight versions available in 10 contact arrangements from 2 to 36 positions * Right-angled versions available in 3, 6, 12 and 18 positions. * All versions are available with: - Pin or socket contacts - Stamped and formed or solid machined contacts. * Some boardmount connectors have discrimination cavities in between contact cavities, thus offering discrimination without contact loss. * UL recognized File Nr.: E238675 Performance characteristics Operating temperature: Insulation resistance: Test potential: Current rating: -55C to +125C 5000 M min. 2000 VAC 5 Amp for stamped contacts 7.5 Amp for machined contacts 500 matings and Durability: unmatings. Construction Connector body: Glass filled thermoplast UL94-V0 Contacts: High conductive copper alloy No digit (std) = Min. 0.4 Gold all over, over Nickel. T = 3 - 5 Tin all over Plating for Stamped and formed contacts : K9 (std) = Min. 0.4 Gold in contact area, 3 - 5 Tin on solder tail. T = 3 - 5 Tin all over Intermateability * "SMS" Qikmate boardmount connectors with preassembled TRIM TRIO size 16 boarmount contacts are intermateable only with the "SMS" Qikmate cable plug connectors equipped with TRIM TRIO crimp type removable snap-lock contacts (see contact section) Plating table Plating for solid machined contacts: How to order Connector family SMS SMS Contact arrangement Contact type: GE: Solid machined contacts SE: Stamped and formed contacts Design variation: 3: 4: 5: 6: Straight boardmount with female contacts Straight boardmount with male contacts Right angle boardmount with female contacts Right angle boardmount with male contacts Plating indication 123 12 12 GE SE 3 3 - K9 Plastic PC Boardmount Connectors Straight boardmount with female contacts (SMS--GE3 / SMS--SE3K9) Part number Solid machined contacts Part number Stamped and formed contacts SMS2GE3 SMS2SE3K9 SMS3GE3 SMS3SE3K9 SMS4GE3 SMS4SE3K9 SMS6GE3 SMS6SE3K9 SMS9GE3 SMS9SE3K9 SMS12GE3 SMS12SE3K9 SMS15GE3 SMS15SE3K9 SMS18GE3 SMS18SE3K9 SMS24GE3 SMS24SE3K9 SMS36GE3 SMS36SE3K9 For other platings: see plating table Number of contact pos. Number of discrimination pos. 2 0 3 4 6 9 12 15 18 24 36 0 0 0 4 0 8 10 0 0 A B C 11.0 - 19.1 16.2 21.3 14.0 10.2 15.2 16.2 21.2 46.5 19.2 24.2 29.2 34.3 39.4 15.2 10.2 D E 5.9 13.4 15.2 54.6 10.9 16.0 21.1 26.1 31.2 20.9 Straight boardmount with male contacts (SMS--GE4 / SMS--SE4K9) Part number Solid machined contacts Part number Stamped and formed contacts SMS2GE4 SMS2SE4K9 SMS3GE4 SMS3SE4K9 SMS4GE4 SMS4SE4K9 SMS6GE4 SMS6SE4K9 SMS9GE4 SMS9SE4K9 SMS12GE4 SMS12SE4K9 SMS15GE4 SMS15SE4K9 SMS18GE4 SMS18SE4K9 SMS24GE4 SMS24SE4K9 SMS36GE4 SMS36SE4K9 For other platings: see plating table Number of contact pos. Number of discrimination pos. 2 0 3 4 6 9 12 15 18 24 36 0 0 0 4 0 8 10 0 0 124 A B C 11.1 - 19.1 16.2 21.3 14.0 10.2 15.2 16.2 21.2 46.5 19.2 24.2 29.2 34.3 39.4 15.2 10.2 15.2 54.6 D E 5.9 13.4 10.9 16.0 21.1 26.1 31.2 20.9 Plastic PC Boardmount Connectors Right angle boardmount with female contacts (SMS--GE5 / SMS--SE5K9) Part number Solid machined contacts Part number Stamped and formed contacts SMS3GE5 SMS3SE5K9 Number of contact pos. Number of discrimination pos. 3 0 16.5 6 12 18 0 6 10 19.0 21.6 SMS6GE5 SMS6SE5K9 SMS12GE5 SMS12SE5K9 SMS18GE5 SMS18SE5K9 For other platings: see plating table For availability on SMS18, consult factory A B C D E F 20.5 30.2 24.2 16.2 14.4 24.5 29.5 35.2 45.4 29.2 39.4 21.2 31.2 G 6.8 11.9 17.2 Right angle boardmount with male contacts (SMS--GE6 / SMS--SE6K9) Part number Solid machined contacts Part number Stamped and formed contacts SMS3GE6 SMS3SE6K9 Number of contact pos. Number of discrimination pos. 3 0 16.5 6 12 18 0 6 10 19.0 21.6 SMS6GE6 SMS6SE6K9 SMS12GE6 SMS12SE6K9 SMS18GE6 SMS18SE6K9 For other platings: see plating table For availability on SMS18, consult factory 125 A B C D E F 20.5 30.2 24.2 16.2 14.4 24.5 29.5 35.2 45.4 29.2 39.4 21.2 31.2 G 6.8 11.9 17.2 Plastic PC Boardmount Connectors Recommended PC-Board hole lay out for straight male and female boardmount connectors Recommended PC-Board hole lay out for right-angled male and female boardmount connectors 126 Full Plastic Boardmount Pin Headers and Plugs SMS - Qikmate Pin Header Series Description Qikmate Pin Header, available in 3, 4, 6, 9 and 10 positions, provides the additional versatility of straight and right angle board mounting. Offered as an alternative to stacked connectors, the in-line contact design of the pin header provides the user with significant PC board space savings. The boardmount receptacle features positieve polarization and a moulded on pin protection skirt and is supplied preassembled with straight or right angled: * Solid machined or stamped and formed PC board pin contacts. * Coax PC board pin contacts. The socket cable plug features positive quick connect / disconnect latches and is designed to accept N 16 TRIM TRIO .0625" (1.6mm) diameter socket contacts for maximum contact protection. Features and benefits * Available in 3, 4, 6, 9 and 10 positions. * In-line contact design, offering significant PC board space savings. * Boardmount connectors available in straight and right-angled version preassembled with: - Solid machined or stamped and formed pin contacts. * - Coax pin contacts. * UL recognized File Nr.: E238675 Operating temperature: Insulation resistance: Test potential: Current rating: -55C to +125C 5000 M min. 2000 VAC 5 Amp for stamped contacts 7.5 Amp for machined contacts 500 matings and unmatings. Durability: Intermateability Construction Connector body: Glass filled thermoplast UL94-V0 Colour: Black Contacts: High conductive copper alloy Plating for solid machined contacts: No digit (std) = Min. 0.4 Gold all over, over Nickel. T = 3 - 5 Tin all over Plating for Stamped and formed contacts : D28 = Min. 0.75 Au over nickel. D70 = Gold flash all over TR29 = 1.2 Pre-plated Tin all over. Plating for coax contacts: Z17 = Min. 0.75 Au in contact area, Flash on solder tail (inner) Min 0.75 Au in contact area, Tin on solder tail (outer) * "SMS" Socket plugs accept TRIM TRIO size 16 removable snap-lock contacts (see contact section) * Contacts to be ordered seperately. Plating table Performance characteristics How to order Connector family SMS SMS SMS 9 9 9 Contact arrangement Contact type: PH: Pin header boardmount. CH: Coax header boardmount. P3: Socket cable plug for pin and coax boardmount header. Design variation: 1: 2: 3: 4: GE6: GE4: Right angle coax header boardmount with male contacts. Straight coax header boardmount with male contacts Right angle pin header boardmount with stamped male contacts Straight pin header boardmount with stamped male contacts Right angle pin header boardmount with machined male contacts Straight pin header boardmount with machined male contacts Plating indication 127 PH CH P3 3 1 - TR29 Z17 - Full Plastic Boardmount Pin Headers and Plugs Right angle pin header boardmount with male contacts (SMS--PH3 / SMS--PHGE6) Part number Stamped and formed contacts SMS3PH3TR29 SMS4PH3TR29 SMS6PH3TR29 SMS9PH3TR29 SMS10PH3TR29 For other platings: see Part number Solid machined contacts SMS3PHGE6 SMS4PHGE6 SMS6PHGE6 SMS9PHGE6 SMS10PHGE6 plating table. Number of contact positions 3 4 6 9 10 A 31.2 36.3 46.5 61.7 66.8 B C 25.4 19.3 30.4 24.4 40.6 34.5 55.9 49.8 61.0 54.9 Other solder tail lenghts on request Straight pin header boardmount with male contacts (SMS--PH4 / SMS--PHGE4) Part number Stamped and formed contacts SMS3PH4TR29 SMS4PH4TR29 SMS6PH4TR29 SMS9PH4TR29 SMS10PH4TR29 For other platings: see Part number Solid machined contacts SMS3PHGE4 SMS4PHGE4 SMS6PHGE4 SMS9PHGE4 SMS10PHGE4 plating table. Number of contact positions 3 4 6 9 10 A 31.2 36.3 46.5 61.7 66.8 128 B C 25.4 19.3 30.4 24.4 40.6 34.5 55.9 49.8 61.0 54.9 Other solder tail lenghts on request Full Plastic Boardmount Pin Headers and Plugs Right angle coax header boardmount with male contacts (SMS--CH1Z17) Part number positions Number of contact SMS3CH1Z17 3 31.2 25.4 19.3 4 6 9 10 36.3 46.5 61.7 66.8 30.4 40.6 55.9 61.0 24.4 34.5 49.8 54.9 B C SMS4CH1Z17 SMS6CH1Z17 SMS9CH1Z17 SMS10CH1Z17 For plating spec.: see plating table. A B C Straight coax header boardmount with male contacts (SMS--CH2Z17) Part number positions Number of contact SMS3CH2Z17 3 31.2 25.4 19.3 4 6 9 10 36.3 46.5 61.7 66.8 30.4 40.6 55.9 61.0 24.4 34.5 49.8 54.9 SMS4CH2Z17 SMS6CH2Z17 SMS9CH2Z17 SMS10CH2Z17 For plating spec.: see plating table. 129 A Full Plastic Boardmount Pin Headers and Plugs Socket cable plug for pin and coax boardmount header (SMS--P3) Part number Number of contact positions D SMS3P3 3 16.0 SMS4P3 SMS6P3 SMS9P3 SMS10P3 4 6 9 10 21.1 31.2 46.5 51.6 Part number of contact positions E F 3 10.18 25.40 4 6 9 10 15.24 25.40 40.64 45.72 30.48 40.64 55.88 60.96 Recommended PC-board hole layouts 130 Rectangular Mixed Power/ Signal Description Power connectors are connectors to meet mixed power and signal requirements. This range of power connectors is an extension of the long established and popular TRIM TRIO connector series shown in this catalogue, but with the advantage of offering a number of additional features Features and benefits * Connectors suitable for mixed power / signal application. * Design in flexibility of TRIM TRIO. Our Design flexibilities are virtually unlimited on: * * * * * * * * * Contact arrangements Mixed contact lay-outs Power versions Hybrid contacts arrangements Filtered connectors High speed solutions Robust designs Higher corrosion withstandings ... The next page lists some of the mixed power / signal TRIM TRIO connector configurations. It is intended to give you a general idea of our design capabilities. As the creation of mixed power / signal TRIM TRIO connectors is an ongoing process, we advise you to contact our nearest SOURIAU sales office if you have specific connector needs. Our design flexibility is virtually unlimited, so we are always willing to consider any customised design. Separate data sheets with more detailed technical info of the listed mixed power / signal TRIM TRIO connectors are available. 131 Rectangular Mixed Power/Signal SMS 12 with 8 power & 4 standard TRIM TRIO contacts Description It is an SMS12 connector with a modified insert arrangement to accept 8 power contacts #12 (2.4mm) and 4 TRIM TRIO #16 (1.6mm) signal contacts. It also offers 4 extra discrimination cavities that accept the SMSPKE3 discrimination pins. Typical performance characteristics. Contact accommodation * Power contacts #12 (2.4mm) for up to 26 Amp * Operating temp: -55C to +150C * For furtur characteristics,(refer to technical drawings) * Signal cavities accept the TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) * Power cavities accept the 8291 power contacts (see power contacts 8291 section) * Contacts to be ordered seperately. Available part numbers: Part number Shell size SMS12PDH2NA 12 Description Plug connector Receptacle connector SMS12RDH2NA For dimensions or others characteristics, refer to section SMS with corresponding shell size or refer to the technical drawings SMS 12P24 with 8 power & 4 standard TRIM TRIO contacts Description It is an SMS15 connector with a modified insert arrangement to accept 8 power contacts #12 (2.4mm) and 4 TRIM TRIO #16 (1.6mm) signal contacts. Designed per VDE 0110 It also offers 4 extra discrimination cavities that accept the SMSPKE3 discrimination pins. Typical performance characteristics. Contact accommodation * * * * * Signal cavities accept the TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) * Power cavities accept the 8291 power contacts (see power contacts 8291 section) * Contacts to be ordered seperately. Power contacts #12 (2.4mm) for up to 26 Amp Operating temp: -55C to +150C Per VDE 0110 (refer to technical drawings) For furtur characteristics,(refer to technical drawings) Available part numbers: Part number Shell size SMS12P24PDH1NA 15 SMS12P24RDH1NA Description Plug connector Receptacle connector For dimensions or others characteristics, refer to section SMS with corresponding shell size or refer to the technical drawings 132 Rectangular Heavy Duty Connectors MS75 with die cast hood & integrated shroud Description This MS75 connector features a robust cable hood with integrated shroud and turnable jackscrews. It is available for different cable diameters Performance characteristics. Refer to technical drawings Available part numbers (consult factory): Contact accommodation Several part number are available with cable glands to accept different cable diameters. * "MS-M" Hyfen connectors accept TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contact section) * Contacts to be ordered seperately MS50 & MS75 with robust cable hood & shroud Description This MS50 & MS75 connector features a robust cable hood with shroud. It also features enlarged turnable jackscrews to ease the connector mating and unmating in extreme conditions. Performance characteristics. Refer to technical drawings Contact accommodation * "MS-M" Hyfen connectors accept TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contact section) * Contacts to be ordered seperately Available part numbers: Part number Shell size Description MS50RM157SGMSP2256 50 50 position cable connector with shroud MS75RM157SGMSP2256 75 75 position cable connector with shroud 133 Rectangular Drawer Connector DRW25 drawer connector with 2 DIN 41626 coax cavities Description DRW25 drawer connector is made for blind mating applications and accept: 25 TRIM TRIO contacts and 2 DIN 41626 coax contacts Performance characteristics. Refer to technical drawings Contact accommodation * Signal cavities accept the TRIM TRIO size 16 crimp-type removable snap-lock contacts (see contacts section) * Coax cavities accept DIN 41626 coax contacts (not available from Souriau) * TRIM TRIO Contacts to be ordered seperately. Available part numbers: Part number Description DRW25C2P1 25 + 2 Positions, female drawer plug. DRW25C2R1 25 + 2 Positions, male drawer receptacle. 134 Monolink Single Position Connector The one-position connector offers an unlimited wiring versatility. It uses all Trim Trio contacts. Performance characteristics. Operating Temperature: -55C to +125C Durability: 500 Cycles Vibration Resistance: Per MIL-STD-202, method 204 Shock: Per MIL-STD-202, method 207 Features and Benefits * Locking with a positive snap * Unmating force between 3 and 15 lbs., therefore locked until intentionally separated * Molded-in serrations which improve grip on both plug and receptacle while mating and unmating * Both parts cover the contacts entirley, to prevent accidental damage to contacts * White color makes coding for discrimination purposes possilbe * Removable crimp snap-in pin and socket Trim Trio contacts * Ideal for repairing co-axial cables (RG178, RG179, RG187, RG188, etc.) Construction Connector Body: Polyamide 6.6 Contact Accommodation Quick disconnect cable splice accept: * RM/RC Machined Contacts * SM/SC Formed one-piece Contacts * SM/SC Formed two-piece Contacts * RMDX/RCDX Coaxial Contacts Part number RSCDEX2 RSMDEX1 Description Plug Body Receptacle Body 135 Contacts Overview TRIM TRIO contacts TRIM TRIO contacts are a wide and versatile range that are offered in many options for crimp, coax and Fiber optic applications This section gives an overview on available rectangular connectors for: 1. Size 16 contacts (1.6mm). - RM/RC - High performance machined contacts. SM-M/SC-M - Stamped and formed contacts. RMDX/RCDX - Coax Contacts. Fiber optic contacts 2. Size 20 contacts (1.0mm). - RM-W/RC-W - High performance machined contacts. - SM-W/SC-W - Stamped and formed contacts. 3. 8291 power contacts. - Size 12 contacts (2.4mm) - Size 8 contacts (3.6mm) 136 Machined Crimp Contacts size 16 RM/RC-M Description Size 16 RM/RC .063" (1.6mm) diameter contacts are precision solid machined crimp snap-in pin and sockets for heavy duty top performance requirements. Springs on both contacts are made of spring-tempered, heat-treated, berylium copper. The socket inner spring supplies high contact pressure to ensure low-resistance contact between pin and socket. The socket contact features closed entry to prevent probe damage. Crimp barrels have insulation grips for vibration support and are provided with a cable stop and inspection hole. Features and benefits * Made from high conductive copper alloy with gold or tin over nickel plate finish. * Heat-treated beryllium copper locking springs assure proper locking and alignment of contacts in the housing. * Closed entry design on RC socket contact to prevent probe damage. * Contacts available in bulk packing Performance characteristics Current rating: Contact resistance: 13 Amp 3 m Construction Connector accommodation Contact body: High conductive copper alloy. Outer spring: Tempered, heat-treated, beryllium copper. Inner spring socket: Tempered, heat-treated, plated beryllium copper. Any TRIM TRIO size 16 contact can be used in any contact position in any connector in the TRIM TRIO size 16 interconnection system. * MS-M / MSG / MB * SMS Qikmate * UTG * UTP * UT0 * UTS * UTV * MBG Plating table Contact retention in body: 110 N min. Individual insertion force: 3.5 N max. Individual withdrawal force: 0.55 N min. K (std) = Min. 0.4 Gold all over,over Nickel J = Gold flash all over, over Nickel N = Min. 0.75 Gold all over,over Nickel T = 3 - 5 Tin all over, over Nickel Other platings on request How to order (K) RM (K) RC Male contact bulk packing Female contact bulk packing Male contact on plastic carrier strip Female contact on plastic carrier strip Contact type: RM: RC: KRM: KRC: AWG Size: 16, 20, 24, 28 Size 16: .0625" (1.6mm) Diameter contacts Design variation: Crimp barrel Grounding contact: Plating indication: See plating table Packing quantity: No digit (std) : 50 pcs. bulk packing (RM/RC) : 2000 pcs on reel (KRM/KRC) 1000 : 1000 pcs bulk packing (RM/RC) 137 16 16 M M 23 23 (GE1) (GE1) K K - - Machined Crimp Contacts size 16 Standard RM/RC crimp contacts: Contact size 16 - Pin diameter 1.6mm (.063") Dimensional table Part number Pin contacts Fig. RM28M1(*) RM24M9(*) RM20M13(*) RM20M12(*) RM16M23(*) RM16M23GE1(*) RM14M50(*) RM14M30(*) 1 2 3 4 5 5 Wire size Socket contacts Standard RC28M1(*) RC24M9(*) RC20M13(*) RC20M12(*) RC16M23(*) RC16M23GE1(*) RC14M50(*) RC14M30(*) AWG mm Max. wire dia. 6 7 30-28 26-24 0.05-0.08 0.13-0.20 0.55 0.8 8 22-20 0.32-0.52 1.18 20-16 0.52-1.50 1.80 16-14 16-14 1,5-2,5 1,5-2,5 2,05 2,28 Fig. 9 9 10 10 2 Max. insul. dia. Wire strip length O.D. 1.1 1.6 1.8 2.2 4.8 1,90 2,55 2,92 2,92 3.2 7.1 L1 L2 26,2 18.2 2,55 27,2 19.7 3,10 3,10 26,2 18.2 (*) Plating indication : See plating table For machined contact reeled on plastic carrier: put "K" in front of part number e.g. KRM16M23K For grounding contacts (1 mm longer) add "GE1" to the part number (e.g. RM16M23GE1K) For last make contacts (0,3 mm shorter) add "GE3" to the part number (e.g. RM16M23GE3K) Special RM / RC contacts: Contact size 16 - Pin diameter 1.6mm (.063") Part number Wire size Post cross Pin contacts Socket contacts Type AWG mm2 section A Length out of TRIM TRIO cavity RM16SEO(*) RM20M12G4(*) RC16SE4(*) RC20M12G4(*) Soldercup Mini - wrap 16 - 20 28 - 30 1.50 - 0.52 0.08 - 0.05 o1.7 o 0.636 3.5 16.0 Antirotating bushing part number J1661 (*) Plating indication : See plating table. Crimptooling table Hand crimp tooling for loose contacts Size Hand tools die set included MH860 Positioner M10S1 Locator setting (not incl.) 4/6 28-1 MH86164G 24-9 20-12/13 Y16RCM 16-23 16-GE1 or 14-30 Stop bushing Die set (not incl.) (not incl.) (not incl.) S9 N24RT10 5/6 SL40 5/7 S10 6/8 S3D1 -- M8ND Die set N20RT30 MH86186 -- 14-50 Automatic crimp tooling for contacts on strip S3-14 P100MAN (Press) Left side applicator KRM/KRC (not incl.) tools (not incl.) -MLSP2763 Consult MLSP2764 Factory SL39 N16RT21 SL115 N16RT25 MLSP2765 SL39 -- -- RX2025GE1 or AF8 + TP120 Stripper unit Extraction RX2025GE2 - or RX16D11D1 -- -- -- -- For detailed information on crimp tooling : See crimp tooling section 138 -- -- Machined Contacts PC Boardmount size 16 Nominal length (dim G) of dipsolder contacts out of connector (contacts to be ordered separately) UTP0 / UTG0 wall mounting receptacle connectors Pin contact Socket contact Connector size All sizes RM20M12E8* RM20M12E83* RC20M12E8* RC20M12E83* RC20M12E84* 5.2 10.3 5.2 10.4 13.9 * Plating indication: See (plating table) UT00 wall mounting receptacle connectors Pin contact Socket contact Connector size RM20M12E8* RM20M12E83* RC20M12E8* RC20M12E83* RC20M12E84* 10 4 9.1 3.3 8.5 12.1 12 4 9.1 3.3 8.5 12.1 14 4 9.1 3.3 8.5 12.1 16 4 9.1 3.3 8.5 12.1 18 4 9.1 3.3 8.5 12.1 20 4.1 9.2 1.8 7 10.6 22 4.1 9.2 1.1 6.3 9.9 24 4.1 9.2 1.1 6.3 9.9 * Plating indication: See (plating table) UT07 jam nut receptacle connectors Pin contact Socket contact Connector size RM20M12E8* RM20M12E83* RC20M12E84* RC20M12E85* RC20M12E86* 10 4.1 9.2 4.65 7.15 7.95 12 4.1 9.2 4.65 7.15 7.95 14 4.1 9.2 5.35 7.85 8.65 16 4.1 9.2 4.65 7.15 7.95 18 4.1 9.2 4.65 7.15 7.95 20 4.85 3.4 4.2 22 4.85 2.7 3.5 24 3.35 1.3 2.1 For recommended PC-Board hole lay out: Consult factory * Plating indication: See (plating table) 139 Machined Contacts size 16 The RM/RC contact principle The RM/RC contact packing 50 pcs bulk packing (standard) 1000 pcs bulk packing Reeled contacts on plastic carrier (qty 2000 pcs) 140 Stamped and Formed Contacts size 16 One Piece SM/SC-M Description Size 16 SM/SC .063" (1.6mm) diameter contacts are two piece strip formed crimp snap-in pin and sockets. These contacts consist of a crimp body made of high conductive copper alloy, and a stainless steel retaining spring featuring retention in the housing cavity and a closed entry socket to prevent probe damage. The contact with its open barrel is standard available on srtip and packaged with 3000 pcs on reel. This reel packaging combined with semi or even full automatic crimp tooling provides the added advantage of a lower installed cost. Features and benefits * Made from high conductive copper alloy with gold or tin over nickel plate finish. * Two piece construcion with dual purpose spring which serves for contact retention and protects the body against damage. * Contacts available on reel (standard) and in bulk packing (25 pcs). * Suitable for high volumes and lower installation cost. Performance characteristics Current rating: Contact resistance: Plating table S6 = 0.75m Gold min. in contact area, flash on crimp barrel over Nickel. D70 = Gold flash all over, over Nickel. TK6 = Preplated Tin all over. 13 Amp 6 m Contact retention in body: 65 N min. Individual insertion force: 3.5 N max. Individual withdrawal force: 0.55 N min. Construction Contact body: High conductive copper alloy. Outer spring: Stainless steel * MS-M / MSG / MB * SMS Qikmate * UTG * UTP * UT0 * MBG * UTS * UTV Note: Reeled contacts are for applicator with left side feeding. Connector accommodation Any TRIM TRIO size 16 contact can be used in any contact position in any connector in the TRIM TRIO size 16 interconnection system. How to order SM SC Contact type: SM: Male contact SC : Female contact AWG Size: 14, 16, 20, 24 16 16 Type of crimp barrel: American open crimp barrel Packing: No digit: Contacts on strip (qty 3000 per reel) L: Preformed loose piece contacts Design variation 1 : Only wire crimp for size 14 and 16 : Wire + insulation crimp for sizes 20 and 24 11 : Wire + insulation crimp for size 16 Plating indication: See plating table 141 M M (L) (L) 1 1 S6 S6 Stamped and Formed Contacts size 16 One Piece Standard SM/SC crimp contacts: Contact size 16 - Pin diameter 1.6mm (.063") Dimensional table Part number: contacts on strip Part number: Loose piecesmn Pin contacts Fig. SM24M1S6 1 SM24ML1S6 SM20M1S6 3 SM20ML1S6 SM16M1S6 5 SM16ML1S6 SM16M11S6 7 SM16ML11S6 SM14M1S6 9 SM14ML1S6 For other platings: See plating table. Wire size Socket contacts SC24M1S6 SC24ML1S6 SC20M1S6 SC20ML1S6 SC16M1S6 SC16ML1S6 SC16M11S6 SC16ML11S6 SC14M1S6 SC14ML1S6 Fig. AWG mm2 Insulation diameter Wire strip length 2 26 - 24 0.13 - 0.25 0.89 - 1.58 4.0 4 22 - 20 0.35 - 0.50 1.17 - 2.08 4.0 6 18 - 16 0.80 - 1.50 3.0 6.35 8 18 - 16 0.80 - 1.50 2.0 - 3.0 4.65 10 14 2.0 - 2,5 3.2 6.35 Crimptooling table Hand crimp tooling for loose contacts Automatic crimp tooling for contacts on strip Extraction tooling Size Hand tools die set included M8ND Die set (not included) N24RT11 N20RT29 P100 MAN Mini Applicator (not included) MLS0318B MLS0555A N16RT26 MLS0356A Y16SCM2 (ratchet) Y14SCM2 (not ratchet) Y14MTV (ratchet) 16M(L)11 Y16SCM2 (ratchet) Y14SCM2 (not ratchet) 16M(L)1 Y14SCM (ratchet) Y14MTV (ratchet) 14 Y14SCM (ratchet) Y14MTV (ratchet) For detailed information on crimp tooling : See crimp 24 20 (Stripper - crimper) SC10S1 N16RT24 MLS1579 N14RT13 MLS1047 tooling section 142 RX2025GE1 or RX2025GE2 or RX16D11D1 Stamped and Formed Contacts size 16 One Piece SM/SC-M - One Piece Description Economic one piece contacts are formed of brass and available with tin or gold plate finishes. Contacts accomodate No. 16 stranded through No. 26 solid or stranded. They are supplied 3,000 to a reel and installed with the Burndy UTM-2 installation machine. These one-piece formed contacts are rated to 5 amps. Features and benefits * Made from high conductive copper alloy with gold or tin over nickel plate finish. * Contacts available on reel (standard) and in bulk packing (25 pcs). * Suitable for high volumes and lower installation cost. Performance characteristics Current rating: Contact resistance: 5 Amp 7 m Connector accommodation Construction Contact body: High conductive copper alloy. Plating table S6 = 0.75m Gold min. in contact area, flash on crimp barrel over Nickel. TK6 = Preplated Tin all over. Any TRIM TRIO size 16 contact can be used in any contact position in any connector in the TRIM TRIO size 16 interconnection system. * MS-M / MSG / MB * SMS Qikmate * UTG * UTP * UT0 * MBG * UTS * UTV Dimensional table Installation Tools Pin contacts Socket contacts Wire Range AWG Insulation Range M8ND/Y8ND Die Set UTM-2 Crimp Mechanism SM24M6S6 SM24M6TK6 SC24M62S6 SC24M62TK6 26 - 24 SOL / STR .038" - .062" N24RT-11 CM11G1 SM20M6S6 SM20M6TK6 SC20M62S6 SC20M62TK6 20 - 22 SOL / STR .046" - .082" N20RT-29 CM11G1 SM16M6S6 SM16M6TK6 SC16M62S6 SC16M62TK6 16 - 18 STR -- N16RT-24 CM11 SM16M16S6 SM16M6TK6 SC16M62S6 SC16M62TK6 16 - 18 STR .082" - .118" N16RT-26 CM27 Extraction Tool RX16D11-D1 143 Coaxial Contact Kits size 16 RMDX/RCDX-K Description Size 16 RMDX/RCDX Monocrimp .0625" (1.6mm) diameter contacts are one-piece monocrimp subminiature coaxial contacts to cover a wide range of subminiature coaxial and twisted pair cables. They provide cost effective solutions in applications where a mix of signal, power and coaxial cable terminations for low frequency, shielded signal and high frequency applications are needed. Monocrimp one piece coaxial contacts offer high reliability plus the economic advantage of a 95% reduction in installation time over conventional assembly methods currently in use. Features and benefits * The monocrimp one-piece coaxial contacts offer high reliability plus the economic advantage of a 95% reduction in installation time over conventional assembly methods. * This economy is achieved by simultaneously crimping of both the inner and outer conductor Retaining spring: berylium copper Insulating bushing: Polyamide 6.6 Performance characteristics Retaining spring: Nickel plated Inner and outer contacts: D28: 0.75 Gold min. over Nickel Operating voltage between inner / outer contact: 230 VDC Test potential between inner / outer contact 450 VAC 1 min. Operating temperature: -55C t0 + 125C Contact retention in body: 65 N min. Contact voltage drop a 1A: 30m V max. Isolation at 30 MHZ: 140 db. connector in the TRIM TRIO size 16 interconnection system. * MS-M / MSG / MB * SMS Qikmate * UTG * UTP * UT0 * MBG Plating table Connector accommodation Any TRIM TRIO size 16 contact can be used in any contact position in any Construction Inner and outer contacts: High conductive copper alloy How to order RMDX RCDX Contact type: K10 K1 RMDX = Male subminiature coax. RCDX = Female subminiature coax. Monocrimp design variation Plating indication 144 D28 D28 Coaxial Contact Kits size 16 MULTIPIECE Subminiature coax - Male contact for coaxial cable Contact for inner conductor Type of coaxial cable RG161U RG179A/U RG179B/U RG187U RG174/U RG188/U Amphenol 21-598 RG178A/U RG196U Inner female contact Part number Fig. Crimp tool M10S1 Die Set Stop Bushing Contact for outer braid Outer male contact Part number Fig S23D2 RFD26L1D28 2 SL46D2 RMDX602D28 1 Hyring Crimp tool M10S1 Part number Fig YOC074 4 YOC074 4 Die Set Extrac tool Stop Bushing RX2025 GE1 S22-1 SL47-1 S26D2 RX16D11 D1 YOC074 4 + RMDXB0553 3 Kit reference RMDXK10D28 includes RMDX602D28 + RFD26L1D28 + YOC074 + RMDXB0553 and are packed in plastic bag. S23D2 MULTIPIECE Subminiature coax - Female contact for coaxial cable Contact for inner conductor Type of coaxial cable RG161U RG179A/U RG179B/U RG187U RG174/U RG188/U Amphenol 21-598 RG178A/U RG196U Inner male contact Part number Fig. Crimp tool M10S1 Die Set Stop Bushing Contact for outer braid Outer female contact Part number Fig Hyring Crimp tool M10S1 Part number Fig YOC074 4 YOC074 4 Die Set Extrac tool Stop Bushing RX2025 GE1 S23D2 or RMD26L1D28 2 S26D2 SL46D2 RCDX602D28 1 S22-1 SL47-1 RX16D11 D1 YOC074 4 + RCDXB0551 3 Kit reference RCDXK1D28 includes RCDX602D28 + RMD26L1D28 + YOC074 + RCDXB0551 and are packed in plastic bag. S23D2 145 Coaxial Contact Kits size 16 MULTIPIECE Subminiature coax - Male contact for twisted pair cable Contact for inner conductor Type of coaxial cable Inner female contact Part number 2 #24 solid or stranded 2 #26 str 2 #24 7/0,20 str. MIL-W-76 or RFD26L1D28 MIL-W-16878 type B #28 per MIL-W81822/3 Fig. 2 Crimp tool M10S1 Die set S26D2 Stop bushing SL46D2 Contact for outer braid Outer male contact Part number RMDX602D28 Fig 1 Hyring Crimp tool M10S1 Part number Fig YORX090 YOC074 RMDXB0553 4 5 3 YORX090 YOC074 RMDXB0554 4 5 3 YORX090 YOC074 RMDXB0553 4 5 3 Die set Extrac tool Stop bushing RX2025 GE1 or S221 SL471 RX16D11D1 MULTIPIECE Subminiature coax - Female contact for twisted pair cable Contact for inner conductor Type of coaxial cable Inner male contact Part number 2 #24 solid or stranded 2 #26 str 2 #24 7/0,20 str. MIL-W-76 or RMD26L1D28 MIL-W-16878 type B #28 per MIL-W81822/3 Fig. 2 Crimp tool M10S1 Die set S26D2 Stop bushing SL46D2 Contact for outer braid Outer female contact Part number RCDX602D28 146 Fig 1 Crimp tool M10S1 Hyring Part number Fig YORX090 YOC074 RCDXB0551 4 5 3 YORX090 YOC074 RCDXB0552 4 5 3 YORX090 YOC074 RCDXB0551 4 5 3 Die set Extrac tool Stop bushing RX2025 GE1 or S221 SL471 RX16D11D1 Monocrimp Coaxial Contacts size 16 RMDX/RCDX Description Size 16 RMDX/RCDX Multipiece .0625" (1.6mm) diameter contacts are subminiature coaxial contacts to cover a wide range of subminiature coaxial and twisted pair cables. They are suitable in applications where a mix of signal, power and coaxial cable terminations for low frequency, shielded signal and high frequency applications are needed. The contact consist of an inner pin/socket and an outer male/female body. The thermoplastic insulating bushing in the outer body is designed to accept and permanently retain the inner contact. The outer ferrule hold the outer braid to the outer contact and act as an insulating support to ensure against bending and vibrating stresses. The inner and the outer conductor are crimped individually, thereby enabling inspection of both critical crimp points. Retaining spring: berylium copper Insulating bushing: Polyamide 6.6 interconnection system. * MS-M / MSG / MB * SMS Qikmate * UTG * UTP * UT0 * MBG Features and benefits * The inner and outer conductors are crimped individually * The thermoplastic insulating bushing in the outer body is designed to accept and permanently retain the inner contact. * Outer ferrule hold the outer braid to the outer contact and act as an insulating support to ensure against bending and vibration. Plating table Retaining spring: Nickel plated Inner and outer contacts: D28: 0.75 Gold min. over Nickel Connector accommodation Any TRIM TRIO size 16 contact can be used in any contact position in any connector in the TRIM TRIO size 16 Performance characteristics Operating voltage between inner / outer contact: 230 VDC Test potential between inner / outer contact 750 VAC 1 min. Operating temperature: -55C to + 125C Contact retention in body: 65 N min. Contact voltage drop a 1A: 25m V max. Isolation at 30 MHZ: 140 db. Construction Inner and outer contacts: High conductive copper alloy How to order RMDX60 RCDX60 Contact type: RMDX = Male subminiature coax. RCDX = Female subminiature coax. Multipiece coax kit K10 = Lit male coax. K1 = Kit female coax. Plating indication 147 36 36 D28 D28 Monocrimp Coaxial Contacts size 16 MONOCRIMP Subminiature coax Part number Male Female Coax dimensions AWG inner conduct. RMDX6050D28 RCDX6050D28 RMDX6050D28 RCDX6050D28 RMDX6032D28 RCDX6032D28 RMDX6024D28 RCDX6024D28 RMDX6032D28 RCDX6032D28 RMDX6026D28 RCDX6026D28 RMDX6036D28 RCDX6036D28 RMDX6036D28 RCDX6036D28 * M10SG8 consists of Cable type D max E F Coax strip lengths G A B C Crimp tool M10S1 Die set not incl. - 2.64 2.11 1.70 0.30 - 2.29 1.63 1.22 - 2.90 2.29 1.91 0.38 - 1.78 1.37 0.97 0.48 RG174/U 2.92 2.24 1.52 0.48 - 3.05 2.44 1.96 0.41 RG188A/U 2.79 RG316/U 2.72 5.1 8.9 S80 4.2 8.5 S87 11.7 S80 stop bushing not incl. Extraction tool 30 28 26 0.51 1.98 1.52 die set, stop bushing and M10S1 tool 148 S82 5.1 6.35 S80 11.7 SL105 RX2025GE1 S82 OR S80 RX16D11D1 Monocrimp Coaxial Contacts size 16 MONOCRIMP Twisted pair Part number Male Female Cable strip lenghts AWG inner conduct. RMDX6019D28 26 (19 x 0.10) RCDX6019D28 24 (7 x 0.20) 24 (19 x 0.13) RMDX6031D28 26 (7 x 0.16) RCDX6031D28 Dia. outer jacket (single wire) 1.25 1.25 1.45 0.70 A B 4.7 6.0 C 4.0 Crimp tool M10S1 Die set Stop bushing not incl. not. incl. M10SG8* Crimping kit S80 * M10SG8 consist of die set, stop bushing and M10S1 tool. 149 SL105 Extraction tool RX2025GE1 or RX16D11D1 Fiber Optic Contacts size 16 RM/RC POF Description Size 16 Fiber optic contacts are optical contacts designed for the integration of optical links in all TRIM TRIO cable connectors. The F.O. contacts are designed to accommodate: * Plastic Optical Fiber (POF) 1mm core and 2.2mm jacket * Plastic Clad Fiber (PCF) 230 m core and 2.2mm jacket * Multimode Silica Fiber 50/125 m type 1.5mm (or 900m) jacket Features and benefits * Socket contact is spring loaded to avoid any air gap between the two optical faces. * Low insertion loss is provided by high precision pieces. * Single jumpers, multiway harness and active device housings can be supplied regarding customer requirement. Performance characteristics Fiber type Wave length Optical insertion loss (typ.) Jacketed external diameter Temperature range Cable retention Mating cycles without cleaning Max. mating cycles Connector accommodation POF / PCF 650 nm 2 dB max. 2.2mm -25C to +70C 49N 50 500 Silica 50 / 125m 850 or 1300 nm < 0.5 dB 1.5mm (or 0.9mm with adaptor) -40C to +70C 60N 50 250 Construction Contact body: Copper alloy Outer spring: BeCu How to order Tool kit Crimping / polishing technic POF Contacts (Plastic Optical Fiber) Male contact: RMPOF1000 Female contact: RCPOF1000 PCF Contacts (Plastic Clad Fiber) Male contact: RMPCF230 Female contact: RCPCF230 Silica Contacts Male contact: Female contact: 8012P14G353 8012S14G353 The tool kit contains all necessary tools to terminate contacts for POF Fiber or Silica Fiber, such as * Stripping plier * Crimping plier * Polishing plate and tool * Miscallaneous Part number: consult factory 150 Any TRIM TRIO size 16 contact can be used in any contact position in any connector in the TRIM TRIO size 16 interconnection system. * MS-M / MSG / MB * SMS Qikmate * UTG * UTP * UT0 Machined Contacts Solder Cup Style Solder Cups * No crimp tool required * Ideal for rrototype & repair * Gold plating for high performance Size Pin Contacts Sockets Current Rating Wire Size 16 RM16SE0K RC165E4K 13 Amps 16 - 20 AWG 12 RM12Z43028 RC12Z42028 26 Amps 12 - 14 AWG 8 82911685NZX 82911684ZX 44 Amps 8 - 12 AWG 20 RM20W3KZS (consult factory) RC20W3KZS (consult factory) 7.5 Amps 22 - 26 AWG 151 Contacts for UT0W/UTS Connectors size 20 RM/RC-W Machined Contacts SM/SC-W Stamped Contacts Description Size 20 contacts with a .040" (1.0mm) pin diameter are two piece crimp snap-in contacts in pin and socket version available in: * Solid machined version * Stamped and formed version * Solid machined dip solder contacts - 50A7 - 5016 And designed for heavy duty top performance requirements. These contacts consist of a crimp/solder body made of high conductive copper alloy, and a stainless steel retaining spring featuring retention in the housing cavity and a closed entry socket to prevent probe damage. Crimp contacts accommodate AWG20 through AWG26 wire and the crimp barrels. All contacts have to be ordered separately Performance characteristics Machined Current rating: 7,5 Amps Contact resistance: 6 m Dielectric withstanding voltage: 1500 V Rms min Contact retention in body: 90 N max. Contact engagement force: 5 N max. Contact separation force: 0,3 N min. Plating: 0.40 gold over nickel Features and benefits * Made from high conductive copper alloy with gold plate finish. * Two piece construction with dual purpose spring which serves for contact retention and protects the body against damage. * Stamped and formed contacts packaging - On reel: 3000 pcs - In bulk packing: 100 pcs in plastic bag * Solid machined crimp and dip solder contacts packaging - 50 pcs in plastic box How to order Machined crimp Stamped & formed crimp 0.75 gold over nickel Construction Connector accommodation Contact body: High conductive copper alloy. Outer spring: Stainless steel Any size 20 contacts for UT0W connectors can be used in any contact position. Contact type Machined Dip solder Stamped and Formed 5 Amps 15 m Pin Socket Reeled loose piece Pin Reeled loose piece Reeled loose piece Socket Reeled loose piece Section mm2 Insulation diameter Part number AWG RM24W3K 26 - 24 0.13 - 0.25 1.58 max. RM20W3K RM18W3K RC24W3K RC20W3K RC18W3K SM24W3S26 SM24WL3S26 SM20W3S26 SM20WL3S26 SC24W3S25 SC24WL3S25 SC20W3S25 SC20WL3S25 22 - 20 20 - 18 26 - 24 22 - 20 20 - 18 0.35 - 0.50 0.50 - 1.00 0.13 - 0.25 0.35 - 0.50 0.50 - 1.00 1.58 2.10 1.58 1.58 2.10 26 - 24 0.13 - 0.25 0.89 - 1.58 22 - 20 0.35 - 0.50 1.17 - 2.08 26 - 24 0.13 - 0.25 0.89 - 1.58 22 - 20 0.35 - 0.50 1.17 - 2.08 50A7 RMW50A7K 5016 RMW5016K 50A7 RCW50A7K 5016 RCW5016K Tooling max. max. max. max. max. MH860 + positionner MH86301 Y16SCM3 or Y14MTV Pin For solder tail details see next page. Socket 152 PC Boardmount Contacts for UT0W size 20 Nominal length (dim G) of dipsolder contacts out of connector (contacts to be ordered separately) UT0W0 wall mounting receptacle connectors Pin contact Socket contact Connector size RMW50A7K RMW5016K RCW50A7K RCW5016K 9.43 10.33 9.85 10.50 9.24 10.32 7.65 8.31 RMW50A7K RMW5016K RCW50A7K RCW5016K 9.51 10.41 2.4 3.04 5 6 - - 3.6 4.6 10 12 14 16 18 20 22 24 UT0W7 jam nut receptacle connectors Pin contact Socket contact Connector size 10 12 14 16 18 20 22 24 For recommended PC-Board hole lay out: Consult factory 153 Power contacts 8291 Contacts TRIM TRIO Connectors also offer possibilities to use or combine power contacts with the standard size 16 signal contacts into the same housing. It offers customers to reduce the number of connectors when combining signal and high current applications into 1 connector. The signal cavities accept the full range of TRIM TRIO size 16 contacts for applications up till 13 A. Power cavities will either accept: * Size 12 contacts for applications up till 26 A * Size 8 contacts for applications up till 44 A Pin and Socket contacts are solid machined crimp snap-in and sockets for heavy duty top performance requirements Springs on both contacts are made of spring tempered, heat-treated, beryllium copper. Construction Plating Contact body : High conductive copper alloy Outer spring : Tempered, heat-treated, non plated berylium copper. K = 0.4m Gold mini all over, over Nickel A = 3 Silver all over Performance characteristics Contacts # 12 (O 2,4) Contacts # 8 (O 3,6) Current rating : 26 A 44 A Contact resistance : 5 m 5 m 154 Power contacts 8291 Contacts # 12 (2.4 mm) Contacts # 8 (3.6 mm) How to order Part number Pin Socket Contact size Cable Contact diameter mm Insulator diameter Section mm2 AWG 0.5 20 82911437NA 82911436A 82911435NA 82911434A 82911463NA 82911462A 82911465NA 82911464A 2.5 14 82911437NK 82911436K 0.5 20 82911435NK 82911434K 82911463NK 82911462K 82911465NK #12 2.4 0.75-1.0 18 1.5 16 0.75-1.0 18 1.50 16 82911464K 2.5 14 82913601A 82913600A 1.5 16 82913603A 82913602A 2.5 14 82913605A 82913604A 82913607A 82913606A #12 #8 2.4 3.6 4 12 6 10 Locator Extraction tooling mm 4.9 M317 VGE10077A 51060210924 4.9 M317 VGE10077A 51060210924 6.5 M317 VGE10078A 51060210936 82913609A 82913608A 10 8 RM12Z43D28 RC12Z43D28 12 2.4 10-4 8-12 N/A NO TOOL REQUIRED 82911685NZX 82911684ZX 8 3.6 4-25 12-14 N/A SOLDER CUP - NO TOOL REQUIRED 155 Accessories Discrimination keys for TRIM TRIO size 16 connectors Description In applications where similar connectors are used next to each other, mismatching can be a reason for disturbances, system failure or even danger to operating personnel. To eliminate mismatching, all TRIM TRIO connectors can be equipped with discrimination keys, which offer unlimited possibilities for a "fool - proof" interconnection system. When one of these discrimination keys is used, the TRIM TRIO connector will only mate with a connector which has a vacant contact or discrimination cavity at the corresponding position. This system offers boundless opportunities for all applications which involve several identical TRIM TRIO connectors. The material used is polyamide 6.6 SMSPKE0 A dummy contact, which can be inserted into an empty contact cavity in any of the TRIM TRIO connectors. SMSPKB2 A tube, which can be fitted over a preassembled male contact in all TRIM TRIO male boardmount connectors MSO, SMS, MSG. 156 Accessories SMSPKE2V1 A pin, which can be inserted into a preassambled female contact in all TRIM TRIO female boardmount connectors MSO, SMS. SMSPKE3 A pin, Which can be inserted in the discrimination cavities of the SMS Qikmate cable and boardmount connectors. The discrimination cavities are in between of the contact cavities and offer the advantage that no contact cavities are lost due to discrimination. As extraction tool, the RX2025GE1 without the "extraction tool tip" can be used. To unlock the discrimination pin, insert the extraction tool in the discrimination cavity at the rear side of the connector. Meanwhile, the pin can be extracted manually at the mating side. 157 Tooling - intro Overview TRIM TRIO tooling Crimptooling for TRIM TRIO contacts The TRIM TRIO connection system not only offers versatility in connectors but production versatility in tooling as well. All information needed on tooling ranges from simple handtools for small production, over semi-automatic to full automatic strip-and-crimp machines can be found on the hereafter paragraphs. All the TRIM TRIO tooling and this for machined, stamped and formed and coax contacts, is specially designed for this system to make reliable, trouble-free connections. 158 Tooling Crimptooling for Size 16 contacts (O 1,6 mm) For an overview on crimptooling refer to "crimptooling tables" at the different contact sections. Weight: Length: 425 gr. 250 mm. Weight: Length: 400 gr. 205 mm. M10S1 - for machined contacts Y16RCM - for machined contacts A robust, versatile, full cycling handtool which is fully qualified to the requirements of MIL-C-22520. Interchangeable 4-indent die sets are available for a wide range of machined contacts and gives a simultaneous crimp on both wire and insulation. This tool is suitable for application of RM/RC machined contacts and coaxial from the TRIM TRIO range. A light weight, low cost crimptool with fixed, 3-groove die set to crimp Size 16 TRIM TRIO RM/RC loose piece machined contacts. The tool is ratchet controlled to guarantee a complete crimp cycle. Each crimptool is supplied with a locator to guarantee a perfect crimp indent positioning. Weight: Length: 300 gr. 170 mm. Weight: Length: 425 gr. 250 mm. MH860 - for machined contacts AF8 - for machined contacts A light weight crimptool Qualified to MIL-C-22520/7 that gives an 8 impression crimp with a precision cycle-controlled ratcheting mechanism. It features an 8 step crimp-depth selector knob and is designed to crimp Size 16 TRIM TRIO RM/RC loose piece machined contacts. The tool can be provided with different locators heads to crimp different contact types. Qualified to MIL-C-22520/1, has virtually limitless application within the specified wire range of 12 through 26 AWG. It gives an 8 impression crimp with a precision cycle-controlled ratcheting mechanism and is used for certain machined power contacts and certain coax contacts. The tool can be provided with different locators turret heads to crimp different contact types. 159 Tooling Crimptooling for Size 16 contacts (O 1,6 mm) For an overview on crimptooling refer to "crimptooling tables" at the different contact sections. Weight: Length: 340 gr. 220 mm Weight: Length: 800 gr. 275 mm. Y14SCM2 - for formed contacts M8ND - for machined and formed contacts A low cost non ratchet plier type handtool for AWG26 to 16 + insulation crimp for: Size 16 TRIM TRIO SM-M/SC-M loose piece formed contacts. Size 20 SEALOK SM-W/SC-W loose piece formed contacts. A robust full cycling hand ratchet tool which utilises interchangeable "N" die sets to crimp Size 16 TRIM TRIO RM/RC loose piece machined contacts. Size 16 TRIM TRIO SM-M/SC-M loose piece formed contacts. Weight: Length: Weight: Length: 400 gr. 230 mm. 400 gr. 205 mm Y14MTV - for formed contact Y16SCM2 - for formed contacts A light weight crimptool with fixed 3-groove die set for AWG26 to 14 for: Size 16 TRIM TRIO SM-M/SC-M loose piece formed contacts. Ratchet controlled to guarantee a complete crimp cycle. A light weight crimptool with fixed 3-groove die set for AWG26 to 16 for: Size 16 TRIM TRIO SM-M/SC-M loose piece formed contacts. Ratchet controlled to guarantee a complete crimp cycle. Each crimptool is supplied with a locator to guarantee a perfect crimp indent positioning. 160 Tooling Crimptooling for Size 16 contacts (O 1,6 mm) For an overview on crimptooling refer to "crimptooling tables" at the different contact sections. Weight: Length: 400 gr. 205 mm. Y14SCM - for formed contacts A light weight crimptool with fixed 3-groove die set for AWG18 to 14 for: Size 16 TRIM TRIO SM-M/SC-M loose piece formed contacts. Ratchet controlled to guarantee a complete crimp cycle. Each crimptool is supplied with a locator to guarantee a perfect crimp indent positioning. 161 Tooling Extraction and insertion tooling for size 16 contacts (O 1,6 mm) Extraction tip RX2025GE1 RX2025GE2 A spring loaded extraction tool for the full range of TRIM TRIO contacts. This tool ensures that the contact locking louvres are fully retracted before any pressure is applied to extract a contact. Part number for extraction tip: RX2025GE1P4. A low cost spring loaded extraction tool for the full range of TRIM TRIO contacts. RX16D11D1 How to extract a contact out of its cavity? A spring loaded extraction tool for the full range of TRIM TRIO contacts. This tool ensures that the contact locking louvres are fully retracted before any pressure is applied to extract a contact. It is especially suitable for applications where the integrity of the assemblies are of the utmost importance. Slide the extraction tip over contact from mating side till the locking spring from the contact is depressed. Push on handle to push out the contact with the spring loaded inner plunger. Insertion tooling RTM205 This tool is especially designed to ease insertion of any TRIM TRIO contact crimped on very flexible or small wire sizes. Simply position the insertion tool so that the tip of the tool bears against the back of the wire barrel, retaining the wire with thumb in the groove of the tool. Push the contact slowly into the connector until it snaps into position. 162 Tooling Crimptooling for Size 20 contacts (O 1,0 mm) For an overview on crimptooling refer to "crimptooling tables" at the different contact sections. Weight: Length: 300 gr. 170 mm. Weight: Length: 340 gr. 220 mm MH860 - for machined contacts Y14SCM2 - for formed contacts A light weight crimptool Qualified to MIL-C-22520/7 that gives an 8 impression crimp with a precision cycle-controlled ratcheting mechanism. It features an 8 step crimp-depth selector knob. The tool can be provided with different locators heads to crimp different contact types. A low cost non ratchet plier type handtool for AWG26 to 16 + insulation crimp. Weight: Length: 400 gr. 205 mm Weight: Length: 400 gr. 230 mm. Y16SCM3 - for formed contacts Y14MTV - for formed contact A light weight crimptool with fixed 3-groove die set for AWG26 to 16 for: Size 20 loose piece formed contacts. Ratchet controlled to guarantee a complete crimp cycle. Each crimptool is supplied with a locator to guarantee a perfect crimp indent positioning. A light weight crimptool with fixed 3-groove die set for AWG26 to 14. Ratchet controlled to guarantee a complete crimp cycle. 163 Tooling Extraction and insertion tooling for size 20 contacts (O 1,0 mm) RX20D44 How to extract a contact out of its cavity? A spring loaded extraction tool. This tool ensures that the contact locking louvres are fully retracted before any pressure is applied to extract a contact. It is especially suitable for applications where the integrity of the assemblies are of the utmost importance. Slide the extraction tip over contact from mating side till the locking spring from the contact is depressed. Push on handle to push out the contact with the spring loaded inner plunger. Insertion tooling RTM205 This tool is especially designed to ease insertion of any contact crimped on very flexible or small wire sizes. Simply position the insertion tool so that the tip of the tool bears against the back of the wire barrel, retaining the wire with thumb in the groove of the tool. Push the contact slowly into the connector until it snaps into position. 164 Tooling Automatic crimptooling for size 16 (O 1,6 mm) and size 20 (O 1,0 mm) contacts P100 MAN Press This electromechanical high speed full automatic crimping press is specially designed for mass production and is realised totally in assembled steel parts. The available force consents the crimping of a wire section up to 2.5mm2. The press has a 40mm stroke and can be used together with automatic cut and stripping machines. It uses a new electronic module to control the bracking of the press at the desired point. The noise level of the press is less than 70dB. There is a safety mechanism that stops the press if the working speed is too high or the press does not complete its cycle. This protects the press or equipment mounted on board from damage. Ref.: Power.: Weight: Dimensions: P100MAN 0.37 kWatt 35 kg 200x300x580 MLS--- Left side miniapplicator SC10S1 Stripper-crimper Miniapplicatorsn to crimp machined or stamped and formed TRIM TRIO and SEALOK contacts. All the adjustments requested to make tool correctly functioning (crimp feeding pitch, crimp height...) can be simply made. Resolution of 0.03mm. Regulation range from 0 to 2.7 mm. This stripper unit is used to strip insulation, immediately before the crimping of the contact terminal. The stripper unit is totally separate from the miniapplicator that allows the execution in a way that the setup and trial of the stripper unit can be done independently. Ref.: Stroke: Weight: Dimensions: Ref.: Pressure: Cable section: Stripping length: Weight: See contact sections 40 mm 4.5 kg 145x107x150 SC10S1 5 - 7 bars 0.2 - 3 mm2 2.5 - 12 mm 7.5 kg Options Options 1 - Quality assurance for crimping technology... A crimping force sensor continuously checks the quality of each individual crimp and records it without impairing the processing speed. The sensor detects bad crimp connections, eliminating the high subsequent costs otherwise caused by them. 2 - Crimp pull press gauge The crimp pull press gauge allows to measure the resistance to the pulling of crimped terminals. 3 - Crimp height measuring device 4 - Kit press lighting lamp For ordering consult factory For ordering consult factory 165 Tooling Crimptooling & extraction tooling for power contacts: Size 12 (dia. 2.4mm) Size 8 (dia. 3.6mm) Hand tooling for machined power contact # 12 (2,4 mm) Extraction tooling for power contact # 12 (2,4 mm) Extraction tip Crimp tooling M317 and locator VGE1 0077A Extraction tooling 5106.021.09.24 Extraction tip: 5106.021.34.24 Handtooling for machined power contacts # 8 (3,6 mm) Extraction tooling for contact # 8 (3,6 mm) Extraction tip Crimp tooling M317 and locator VGE1 0078A Extraction tooling 5106.021.09.36 Extraction tip: 5106.021.34.36 166 26482 Series I Connectors 167 26482 Series I Solder Connectors Main Features - Part Numbering System .........................169 Backshells / Hermetic Connectors ....................................170 Contacts....................................................................................172 Layouts ......................................................................................173 Technical Characteristics ......................................................174 Dimensions...............................................................................174 Protective Caps.......................................................................191 Push-Pull Plug ..........................................................................194 8F51 Filter Connector ...........................................................197 168 26482 Series I Solder Connectors Description Applications Formerly used exclusively in military applications, these connectors are now used in a wide variety of commercial applications. * Bayonet coupling * Environmental and hermetic versions * Solder, crimp, straight spills and wire wrap versions * Thermocouple contacts available * Cadmium free plating (Zinc Cobalt) version Standards MIL-C 26482 G Series 1 NFC 93422-He 301 B VG 95328 BS 9522 F 0017 GAM T1 list QPL approved (solder version) Characteristics contact size 20 (O 1 mm) 16 (O 1.6 mm) Mechanical * Shell : * environmental version : - aluminum alloy plating - olive green cadmium - black anodized - white cadmium - satin finish bright nickel - zinc cobalt (olive green) * hermetic version : steel * plating : - iridescent yellow cadmium, nickel * Insulator : - front section : neoprene elastomer (85 shore) - rear section : neoprene elastomer (40 shore) * Contact : - crimp : inserted and removed from rear of insulator retained by metallic clip ; solder and straight spills : non removable ; wire wrap : removable or not removable - material : copper alloy - plating : gold overall or gold plated active zone and tin/lead plated termination - min retention force of contacts in insulator crimp 68 N 113 N solder straight spill ww 68 N 113 N * Mechanical durability : 500 cycles (full mating-unmating) * Contact resistance : - environmental version : size 16 : 3 m size 20 : 4 m - hermetic version : size 16 : 14 m size 20 : 30 m * Shielding : 70 dB to 5 MHz 40 dB to 100 MHz Electrical Environmental * Dielectric withstanding voltage : * at standard pressure : mated and unmated connectors - 1 500 Vrms between size 20 contacts (service 1) - 2 300 Vrms between size 16 contacts (service 2) - 1 500 Vrms between mixed size 20 and 16 contacts (service 1) * at reduced pressure (10 mbar) : connectors mated and unmated - 200 Vrms between size 20 contacts (service 1) - 300 Vrms between size 16 contacts (service 2) * Insulation resistance : 5 000 M under 500 Vdc * Current rating per contact : size 20 : 7.5 A size 16 : 13 A * Working temperature : -55C to +125C * Sealing : - crimp contact version, 1 bar differential pressure, leakage 8 cm3/hr - solder contact version, 2 bar differential pressure, leakage 16 cm3/hr * Hermiticity : 1 bar differential pressure leakage 2,8 mm3/hr * Chemical resistance : - to MIL-C 26482 G Series 1 and - NFC 93422-HE 301 B code A * Resistance to salt spray : 48 hours at environmental temperature * Damp heat : 21 days * Vibration : to NFC 20-616 Ordering information - Environmental connectors solder version crimp version basic series 851 - 00 E 851 - 00 R 8 - 3A 8 - 3A shell type solder 00 01 02E 07 07A 06 08 36 76 crimp 00 01 02R 07 06 08 36 76 - square flange receptacle accepting backshells cable connecting receptacle square flange receptacle not accepting backshells jam nut receptacle accepting backshells jam nut receptacle not accepting backshells plug for use with straight backshells plug for use with 90 backshells screened plug for use with straight backshells screened plug with lock finger backshell type shell size see table next page contact layout see table p 20 contact type orientation P = male - S = female 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 normal (not included in part number) w, x, y, z, see table p 21 obligatory suffix B 50 51 52 54 specification 29 031 44 38 42 crimped version which used layouts 8-2 / 8-3 / 8-4 / 12-14 gold plated crimp contacts - solder contacts size 20 - contacts with a gold plated active zone and tin plated terminations - other gold plated terminations solder contacts gold plated size 20 zinc cobalt olive green plated (contacts : idem specif. 50) black zinc nickel plating olive green cadmium plate (without specification) black anodized (solder contacts) black anodized (crimp contacts) nickel plate nickel plate backshell type T* and RT* olive green cadmium plate } 169 P P * * 50 *** 50 *** 26482 Series I Solder Connectors Backshell type solder version shells solder crimp backshell crimp version 00 01 07 06 08 36 76 00 01 07 06 08 36 76 E R backnut * * * * - - - * * * * - - - EC RC straight cable clamp * * * * - - - * * * * - - - EC RC 90 cable clamp - - - - * - - - - - - * - - straight cable clamp without grommet * * * * - - - - - - - - - - straight backshell for potting * * * * - - - * * * * - - - AC P RP P RP 90 backshell for potting - - - - * - - - - - - * - - A RA straight adapter * * - * - * - * * - * - * - T RT straight backshell for heatshrink sleeving * * * * - - - * * * * - - - M RM straight removable backshell for heatshrink sleeving * * - * - - - * * - * - - - *T *RT straight removable backshell for screen termination and heatshrink sleeving * * * - - * - * * * - - * - straight removable backshell for screen termination and heatshrink sleeving * * * - - * - * * * - - * - G RG J JC U Z RU RZ straight backshell with sealing gland * * - * - - - - - - - - - - straight backshell with sealing gland and cable clamp * * - * - - - - - - - - - - short backshell for screen termination and heatshrink sleeving - - - - - - * - - - - - - * straight adapter for electrical pitch access - - - * - - - - - - * - - - Hermetic connectors 851 -02H 8 basic series shell type 02H - square flange receptable 07H - jam nut receptable IH - solder fixing receptable shell size contact layout 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 see table p 20 contact type P = male only orientation N normal (not included in part number) w, x, y, z, see table p 21 obligatory suffix 50 - gold plating for size 20 contacts specification - 02H and 07H, yellow cadmium plating. IH, nickel (without specification) 44 - 02H and 07H, nickel 170 -3A P * 50 ** 26482 Series I Solder Connectors Straight spills and wire wrap connectors 851 -02E 8 basic series -3A P * 50 shell type 02E - square flange receptable not accepting backshell 07A - jam nut receptable not accepting backshell shell size contact layout 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 contact type P = male - S = female orientation N normal (not included in part number) w, x, y, z, see table p 21 see table p 20 obligatory suffix 50 51 52 54 - pre-tinning for straight spill size 20 contacts (termination area), gold plating for other contacts gold plating for straight spill contacts size 20 zinc cobalt olive green plated (contacts : idem specif. 50) black zinc nickel plating specification 16 olive green cadmium plated body - O 1 mm contact, O 0,6 mm terminal - O 1,6 mm contact, O 1 mm terminal nickel plating - O 1 mm contact, O 0,6 mm terminal - O 1,6 mm contact, O 1 mm terminal non-bonded contacts, olive green cadmium plated shell bonded contacts, olive green cadmium plated shell straight spill 45 34 34A wire wrap Cross reference list 26482 Series I version with crimp contacts (olive green cadmium plating) connectors with backshells NFC 93422 (HE 301 B) Souriau 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 00 00 00 00 00 01 01 01 01 02 06 06 06 06 06 36 36 07 07 07 07 07 76 08 08 R RC RP RG RA R RC RP RA R R RC RP RT RA RG RA R RC RP RT RG RU RC RP .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. MIL-C 26482 G Series I HE 301 B 00 R .. .. .. 1A HE 301 B 00 RC .. .. .. 1A HE 301 B 00 RP .. .. .. 1A * MS 3120 E .. .. .. * MS 3120 F .. .. .. * MS 3120 P .. .. .. VG 95328 VG 95328 A .. .. .. VG 95328 B .. .. .. VG 95328 R .. .. .. HE HE HE HE HE HE HE HE HE 301 301 301 301 301 301 301 301 301 B B B B B B B B B 00 01 01 01 01 02 06 06 06 RA R RC RP RA R R RC RP .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A 1A 1A 1A * MS 3121 E .. .. .. * MS 3121 F .. .. .. * MS 3121 P .. .. .. * * * * MS MS MS MS 3122 3126 3126 3126 E E F P .. .. .. .. .. .. .. .. .. .. .. .. VG 95328 C .. .. .. VG 95328 K .. .. .. VG 95328 J .. .. .. HE 301 B 06 RA .. .. .. 1A HE 301 B 07 R .. .. .. 1A HE 301 B 07 RC .. .. .. 1A HE 301 B 07 RP .. .. .. 1A * MS 3124 E .. .. .. * MS 3124 F .. .. .. * MS 3124 P .. .. .. VG VG VG VG 95328 95328 95328 95328 M N D E .. .. .. .. .. .. .. .. .. .. .. .. VG 95328 S .. .. .. VG 95328 T .. .. .. VG 95328 U .. .. .. HE 301 B 08 RC .. .. .. 1A HE 301 B 08 RP .. .. .. 1A * Not QPL. Other plating plating Souriau solder version crimp version NFC 93422 (HE 301 B) black anodized 851 .. .. .. .. .. 5029 851 .. .. .. .. .. 50031 HE 301 B .. .. .. .. .. 4A nickel 851 .. .. .. .. .. 5044 851 .. .. .. .. .. 5044 HE 301 B .. .. .. .. .. 5A 171 16 26482 Series I Solder Connectors 26482 Series I version with solder contacts (olive green cadmium plating) connectors with backshells NFC 93422 (HE 301 B) Souriau 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 851 00 00 00 00 00 00 00 01 01 01 01 01 01 01 02 06 06 06 06 06 06 06 08 08 07 07 07 07 07 E EC AC P A J JC E EC AC P A J JC E E EC AC P A J JC EC P E EC AC P A .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. HE HE HE HE HE HE 301 301 301 301 301 301 B B B B B B 00 00 00 00 00 00 E EC AC P A J .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A HE HE HE HE HE HE 301 301 301 301 301 301 B B B B B B 01 01 01 01 01 01 E EC AC P A J .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A HE HE HE HE HE HE HE 301 301 301 301 301 301 301 B B B B B B B 02 06 06 06 06 06 06 E E EC AC P A J .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A 1A HE HE HE HE HE HE HE 301 301 301 301 301 301 301 B B B B B B B 08 08 07 07 07 07 07 EC P E EC AC P A .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 1A 1A 1A 1A 1A 1A 1A MIL-C 26482 G Series I VG 95328 MS 3110 E .. .. .. MS 3110 F .. .. .. MS 3110 P .. .. .. MS 3110 J .. .. .. MS 3111 E .. .. .. MS 3111 F .. .. .. MS 3111 P .. .. .. MS MS MS MS 3111 3112 3116 3116 J E E F .. .. .. .. .. .. .. .. .. .. .. .. VG 95328 H .. .. .. MS 3116 P .. .. .. MS 3116 J .. .. .. MS 3114 E .. .. .. MS 3114 F .. .. .. MS 3114 P .. .. .. 851 hermetic version NFC 93422 (model HE 301 B) Souriau 851 02 H 851 07 H 851 IH .. .. P.50 .. .. P.50 .. .. P.50 HE 301 B 02 H HE 301 B 07 H HE 301 B 1 H MIL-C 26482 G Series I .. .. P.3A .. .. P.3A .. .. P.3A * MS 3114 H .. .. P. * MS 3113 H .. .. P. * Not QPL. Contacts - Crimp contacts contact size contact type male standard female male female for contact layouts 82, 83 84 and 12.14 for other contact layouts part numbers section in O over insulation gauge AWG mm2 min/Max (mm) 8500-9573 0.21 to 0.93 24 to 18 1.20 / 2.11 18 to 14 1.60 / 2.80 8500-9331 0.93 to 1.91 20 8500-781 0.06 to 0.21 30 to 24 16 8500-1985 0.60 20 8500-809 8500-812 8500-2054 8500-2055 8500-1053 8500-1058 8500-1054 8500-1059 0.21 to 0.93 24 to 18 1.20 / 2.11 0.93 to 1.91 18 to 14 1.60 / 2.80 8500-9213 20 8500-697 8500-1758A male 8500-1300 16 female thermocouple reducing sleeve chromel alumel chromel alumel chromel alumel chromel alumel male 20 female male 16 female Wire wrap contacts contact type contact size male part numbers diagonals gauge AWG number of wraps 8500-4220 0.78 0.85 0.78 0.85 1.55 1.70 1.55 1.70 26-28-30 3 20 female 8500-9351 male 8500-4304 female 16 8500-4305 26-28-30 3 20-22-24-26 3 20-22-24-26 3 172 VG 95328 VG 95328 F .. .. .. VG 95328 G .. .. .. 26482 Series I Solder Connectors Contact layouts Viewed from front face of male insulator shells 2 8 3 7 8 12 2 O 1 (# 20) 6 10 12 14 23 32 18 15 39 21 2 18 33 3 O 1 (# 20) 26 30 14 19 2 O 1,6 (# 16) 14 O 1 (# 20) 1 O 1,6 (# 16) 14 O 1 (# 20) 18 O 1 (# 20) 19 O 1 (# 20) 26 O 1 (# 20) 29 O 1 (# 20) 1 O 1,6 (# 16) 36 4 O 1 (# 20) 10 O 1 (# 20) 41 37 O 1 (# 20) 2 O 1,6 (# 16) 4 20 16 O 1,6 (# 16) 6 O 1 (# 20) 32 O 1 (# 20) 11 O 1,6 (# 16) 16 10 22 O 1 (# 20) 1 O 1,6 (# 16) 8 O 1,6 (# 16) 11 3 O 1 (# 20) 8 O 1 (# 20) 4 O 1,6 (# 16) 16 98 8 O 1 (# 20) 5 O 1,6 (# 16) 8 7 O 1 (# 20) 3 O 1,6 (# 16) 5 3A ou 98 3 O 1 (# 20) 6 O 1 (# 20) 3 24 41 O 1 (# 20) 55 25 24 O 1 (# 20) 32 25 O 1 (# 20) 34 27 27 O 1 (# 20) 22 36 O 1 (# 20) 21 O 1,6 (# 16) 61 24 55 O 1 (# 20) 32 O 1 (# 20) 34 O 1 (# 20) solder contact layouts (QPL) SHTP solder contact layouts hermetic version contact layouts solder contact layouts without grommet straight spills contact layouts crimp contact layouts wire wrap contact layouts 61 O 1 (# 20) 173 26482 Series I Solder Connectors Polarization - insulator rotated inside metal body Front face of pin insulator shown (receptacle or plug) shell W X Y Z 58 60 60 45 90 122 210 210 -- -- -- -- -- -- -- -- -- -- -- -- 10 6 7 98 90 -- 90 -- -- 180 -- -- 240 -- -- 270 12 3 8 10 2 14 -- 90 60 -- -- 112 155 -- 180 203 270 -- -- 292 295 -- 14 5 12 15 18 19 40 43 17 15 30 92 90 110 90 165 184 -- 155 180 315 273 -- 234 270 -- * * * * 16 8 23 26 54 158 60 152 270 -- 180 -- 275 331 -- 338 * * * 18 11 32 30 62 85 180 119 138 193 241 222 285 340 265 350 16 39 41 24 25 27 238 63 45 70 72 72 318 144 126 145 144 144 333 252 225 215 216 216 22 21 36 55 32 34 16 72 30 72 62 135 144 142 145 142 24 61 90 180 W Y X NFC 93422 HE 30 1B MIL-C 26482G Serie 1 service 1 service 2 solder crimp solder crimp 1500 Vrms 2300 Vrms 2 3 3A (98)* 4 33 8 normal angle in degrees layout 20 Z * * * * * * * * * * * * * * * X X X X X * * * X X X * * * * * * X X X X * * * * X * * * * * * * * * * * X X X X * * * * * * * * * X X * * * * * * * * * * X X 347 333 -- 290 288 288 * * * * * * * * * * * * * * 175 216 226 215 218 349 288 314 288 298 * * * * * * * * * * * X X X X 270 324 * * * * X * X X X X X X X X X * X * 8-98 layout W and non standard orientations Dimensions - square flange receptacle with backnut solder 00 E shell L Max size solder crimp HE 301 B 00 E MS 3110 E crimp 00 R HE 301 B 00 R MS 3120 E VG 95328 A L F E OA OD 4 Holes OJ D Max E F Max J 10 32.70 32.00 15.01 11.70 1.32 16.70 18.26 24.19 3.13 12 32.70 32.00 19.07 11.70 1.32 19.90 20.62 26.54 3.13 14 32.70 32.00 22.25 11.70 1.32 23.40 23.00 28.89 3.13 16 32.70 32.00 25.42 11.70 1.32 26.60 24.61 31.29 3.13 18 32.70 32.00 28.60 11.70 1.32 29.50 26.97 33.69 3.13 24 174 C Max 32.70 32.00 12.03 11.70 1.32 13.50 15.09 20.99 3.13 20 C B Max 08 22 B A 1.287 1.287 1.287 1.287 1.287 1.287 1.260 1.260 1.260 1.260 1.260 1.260 .474 .591 .751 .876 1.001 1.126 .461 .461 .461 .461 .461 .461 .052 .052 .052 .052 .052 .052 .531 .657 .783 .921 1.047 1.161 .594 .719 .812 .906 .969 1.062 .826 .952 1.045 1.137 1.232 1.326 .123 .123 .123 .123 .123 .123 34.50 33.40 31.77 14.35 2.15 32.70 29.36 36.89 3.13 1.358 1.315 1.251 .565 .085 1.287 1.156 1.452 .123 34.50 33.40 34.95 14.35 2.15 36.00 31.75 39.99 3.13 1.358 1.315 1.376 .565 .085 1.417 1.250 1.574 .123 34.50 33.40 38.12 15.20 2.15 39.10 34.92 43.15 3.81 1.358 1.315 1.501 .598 .085 1.539 1.375 1.699 .150 26482 Series I Solder Connectors Square flange receptacle with straight cable clamp L Max shell size solder crimp solder HE 301 B 00 EC MS 3110 F HE 301 B 00 AC 00 EC 00 AC crimp 08 10 HE 301 B 00 RC MS 3120 F VG 95328 B 00 RC 12 14 L 4 Holes OJ F 16 E D OG OA 18 20 22 B C 24 A B Max C Max D Max E F Max G J 48.00 47.30 12.03 11.70 1.32 19.90 15.09 20.99 3.50 1.890 1.862 .052 .826 .138 .123 1.32 21.50 18.26 24.19 5.00 3.13 .474 .461 48.00 47.30 15.01 11.70 1.890 1.862 .591 .461 48.00 47.30 19.07 11.70 1.890 1.862 .751 .461 48.00 47.30 22.25 11.70 1.890 1.862 .876 .461 51.00 50.50 25.42 11.70 2.008 1.988 1.001 .461 51.00 50.50 28.60 11.70 2.008 1.988 1.126 .461 53.00 51.50 31.77 14.35 2.087 2.028 1.251 .565 53.00 51.50 34.95 14.35 2.087 2.028 1.376 .565 .052 .783 .846 .594 .952 .197 .123 1.32 25.00 20.62 26.54 8.20 3.13 .052 .323 .123 1.32 27.80 23.00 28.89 10.00 3.13 .984 .052 1.094 .719 3.13 .812 1.045 .394 .123 1.32 29.40 24.61 31.29 13.00 3.13 .052 1.157 .906 1.137 .512 .123 1.32 35.30 26.97 33.69 16.00 .969 1.232 3.13 .630 .123 2.15 35.30 29.36 36.89 16.00 .052 1.390 1.062 1.326 3.13 .630 .123 2.15 41.10 31.75 39.99 19.30 .085 1.390 1.156 1.452 3.13 .760 .123 53.00 51.50 38.12 15.20 2.15 42.40 34.92 43.15 20.60 3.81 2.087 2.028 1.501 .085 1.669 1.375 1.699 .150 .598 .085 1.618 1.250 1.574 .811 Square flange receptacle with straight backshell for potting L Max shell size solder crimp solder HE 301 B 00 P MS 3110 P 00 P 08 crimp HE 301 B 00 RP MS 3120 P 00 RP 10 12 14 L 4 Holes OJ F 16 E D OA OG 18 20 22 B C 24 A B Max C Max D Max E F Max G Max 36.20 41.70 12.03 11.70 1.32 15.34 15.09 20.99 10.46 1.425 1.642 .052 .474 .461 36.20 41.70 15.01 11.70 1.425 1.642 .591 .461 36.20 41.70 19.07 11.70 1.425 1.642 .751 .461 36.20 41.70 22.25 11.70 1.425 1.642 .876 .461 36.20 41.70 25.42 11.70 1.425 1.642 1.001 .461 36.91 44.46 28.60 11.70 1.453 1.750 1.126 .461 43.80 50.93 31.77 14.35 1.724 2.005 1.251 .565 43.80 50.93 34.95 14.35 1.724 2.005 1.376 .123 1.32 17.70 18.26 24.19 13.55 3.13 .533 .123 3.13 .952 .550 .123 1.32 23.90 23.00 28.89 17.42 3.13 .052 .854 .719 .826 1.32 21.69 20.62 26.54 13.96 .052 .697 .594 3.13 .412 .052 .604 J .941 .812 1.045 .686 .123 1.32 27.00 24.61 31.29 20.56 3.13 .052 1.063 .906 1.137 .809 .123 1.32 30.50 26.97 33.69 23.66 .969 1.232 3.13 .931 .123 2.15 33.65 29.36 36.89 23.92 .052 1.201 1.062 1.326 3.13 .942 .123 2.15 37.10 31.75 39.99 25.52 .085 1.325 1.156 1.452 3.13 .565 .085 1.461 1.250 1.574 1.005 .123 43.80 51.40 38.12 15.20 2.15 40.00 34.92 43.15 32.00 3.81 1.724 2.024 1.501 .085 1.575 1.375 1.699 1.260 .150 .598 Square flange receptacle with straight adapter solder 00 A crimp 00 RA shell L Max size solder HE 301 B 00A 08 HE 301 B 00 RA 10 12 L 4 Holes OJ 14 F E OA OG K D 16 18 20 B A crimp 22 C 24 175 B Max C Max D Max E F Max G Max J 41.00 12.03 11.70 1.32 14.50 15.09 20.99 9.10 3.13 1.614 .052 .358 .123 41.00 15.01 11.70 1.32 18.70 18.26 24.19 12.08 3.13 1.614 .052 .476 .123 41.00 19.07 11.70 1.32 21.70 20.62 26.54 15.25 3.13 1.614 .052 .600 .123 41.00 22.25 11.70 1.32 25.10 23.00 28.89 18.15 3.13 1.614 .052 .715 .123 41.00 25.42 11.70 1.32 28.13 24.61 31.29 21.32 3.13 1.614 1.001 .052 1.107 .123 .474 .591 .751 .876 .461 .461 .461 .461 .461 .571 .736 .854 .988 .594 .719 .826 .952 .812 1.045 .906 1.137 .969 1.232 .839 41.00 28.60 11.70 1.32 31.38 26.97 33.69 24.32 1.614 1.126 .052 1.235 1.062 1.326 .461 44.00 31.77 14.35 1.732 1.251 .957 2.15 34.30 29.36 36.89 26.73 K threading UNEF 2A 1/2 18 5/8 24 3/4 20 7/8 20 1-20 3.13 1-3/16 18 .123 3.13 1-3/16 18 .565 .085 1.350 1.156 1.452 1.052 .123 44.00 34.95 14.35 2.15 37.60 31.75 39.99 30.67 3.13 1-7/16 18 .565 .085 1.480 1.250 1.574 1.207 .123 44.00 38.12 15.20 1.732 1.376 2.15 40.70 34.92 43.15 33.08 3.81 1-7/16 18 1.732 1.501 .085 1.602 1.375 1.699 1.302 .150 .598 26482 Series I Solder Connectors Square flange receptacle with straight backshell for heatshrink sleeving solder 00 T crimp 00 RT L Max shell size solder crimp 08 10 12 L 4 Holes OJ F E OG 16 OD OA 14 18 B M C 20 22 24 A C D B Max Max Max E L Max F Max solder crimp J M Max 36.70 36.00 12.03 11.70 1.32 15.35 15.09 20.99 7.20 6.70 3.13 3.70 1.445 1.417 .474 .461 .052 .604 .594 .826 .283 .264 .123 .146 36.70 36.00 15.01 11.70 1.32 18.15 18.26 24.19 10.20 9.40 3.13 3.70 1.445 1.417 .591 .461 .052 .715 .719 .952 .402 .370 .123 .146 36.70 36.00 19.07 11.70 1.32 23.45 20.62 26.54 13.20 11.95 3.13 3.70 1.445 1.417 .751 .461 .052 .923 .812 1.045 .520 .470 .123 .146 36.70 36.00 22.25 11.70 1.32 24.25 23.00 28.89 16.10 15.15 3.13 3.70 1.445 1.417 .876 .461 .052 .955 .906 1.137 .634 .596 .123 .146 39.00 38.30 28.60 11.70 1.32 31.75 26.97 33.69 21.30 19.95 3.13 3.70 1.535 1.508 1.001 .461 .052 1.163 .969 1.232 .758 .711 .123 .146 39.00 38.30 28.60 11.70 1.32 31.75 26.97 33.69 21.30 19.95 3.13 3.70 1.535 1.508 1.126 .461 .052 1.250 1.062 1.326 .839 .785 .123 .146 45.30 44.20 31.77 14.35 2.15 35.85 29.36 36.89 24.40 23.05 3.13 3.70 1.783 1.740 1.251 .565 .085 1.411 1.156 1.452 .961 .907 .123 .146 45.30 44.20 34.95 14.35 2.15 38.20 31.75 39.99 27.50 25.55 3.13 3.70 1.783 1.740 1.376 .565 .085 1.504 1.250 1.574 1.083 1.006 .123 .146 44.00 42.60 38.12 15.20 2.15 41.30 34.92 43.15 30.60 28.65 3.81 3.70 1.732 1.677 1.501 .598 .085 1.626 1.375 1.699 1.205 1.128 .150 .146 Square flange receptacle with removable straight backshell for heatshrink sleeving solder 00 M crimp 00 RM shell L Max A B size solder Max crimp 50.00 12.03 11.70 08 C Max D Max 1.32 13.55 15.09 .461 .052 50.00 15.01 11.70 1.32 1.969 10 L 4 Holes OJ 12 F 16 E OA OG OD 14 18 B C M 20 22 24 .474 .461 .052 50.00 19.07 11.70 1.32 1.969 1.969 .591 .461 .052 50.00 22.25 11.70 1.32 1.969 .751 .461 .052 50.00 25.42 11.70 1.32 1.969 .876 .461 .052 50.00 28.60 11.70 1.32 1.969 1.001 .461 .052 53.30 31.70 14.35 2.15 2.098 1.126 .565 .085 53.30 34.95 14.35 2.15 2.098 1.376 .565 .085 53.30 38.12 15.20 2.15 2.098 1.376 1.501 .598 .085 E F Max G Max J M Max 3.50 20.99 7.05 3.13 .719 .952 .390 .123 .138 15.35 18.26 24.19 9.90 3.13 3.50 1.045 .496 .123 .138 26.54 12.60 3.13 3.50 .604 .767 .812 19.48 20.62 .767 .812 21.30 23.00 .839 .906 24.50 24.61 .965 .969 26.45 26.97 1.041 1.062 34.24 31.75 1.348 1.250 34.24 31.75 1.348 1.250 36.47 34.92 1.436 1.375 .496 .123 .138 28.89 15.90 1.045 3.13 3.50 .626 .123 .138 31.29 18.95 1.137 3.13 3.50 .746 .123 .138 33.69 20.90 1.232 3.13 3.50 .823 .123 .138 39.99 26.60 1.326 3.13 3.50 1.047 .123 .138 39.99 26.60 1.574 3.13 3.50 1.047 .123 .138 43.15 29.30 1.574 3.81 3.50 .150 .138 1.699 1.154 Square flange receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix) solder 00 T crimp 00 RT shell L Max A B Max size solder crimp 51.60 12.03 11.70 08 C Max D Max 1.32 18.25 15.09 .461 .052 51.60 15.01 11.70 1.32 2.031 10 4 Holes OJ L 12 F 16 E OD OA OG 14 18 B C M 20 22 24 176 2.031 .474 .461 .052 51.60 22.25 11.70 1.32 2.031 .591 .461 .052 51.60 22.25 11.70 1.32 2.031 .751 .461 .052 51.60 25.42 11.70 1.32 2.031 .876 .461 .052 52.00 28.60 11.70 1.32 2.047 1.001 .461 .052 55.10 31.77 14.35 2.15 2.169 1.126 .565 .085 55.10 34.95 14.35 2.15 2.169 1.251 .565 .085 55.10 38.12 15.20 2.15 2.169 1.376 1.501 .598 .085 E F Max G Max J M Max 3.70 20.99 7.45 3.13 .594 .826 .293 .123 .146 20.25 18.26 24.19 9.00 3.13 3.70 .952 .354 .123 .146 26.54 13.30 3.13 3.70 .719 .797 .719 24.75 20.62 .974 .812 27.75 23.00 1.093 .906 30.05 24.61 1.183 .969 34.15 26.97 1.344 1.062 37.25 29.36 1.467 1.156 40.45 31.75 1.593 1.250 36.47 34.92 1.719 1.375 .524 .123 .146 28.89 16.50 1.045 3.13 3.70 .650 .123 .146 31.29 18.50 1.137 3.13 3.70 .728 .123 .146 33.69 21.90 1.232 3.13 3.70 .862 .123 .146 36.89 25.10 1.326 3.13 3.70 .988 .123 .146 39.99 28.20 1.452 3.13 3.70 1.110 .123 .146 43.15 29.30 1.574 3.81 3.50 .150 .146 1.699 1.236 26482 Series I Solder Connectors Square flange receptacle with removable straight backshell for screen termination and heatshrink sleeving solder 00 G crimp 00 RG shell L Max A B Max size solder crimp 51.60 12.03 11.70 08 VG 95328 R 2.031 10 4 Holes OJ L 12 F 16 E OD OG OA 14 18 B C 20 M 22 24 .474 C Max 1.32 .461 .052 51.60 15.01 11.70 1.32 .461 .052 51.60 19.07 11.70 1.32 2.031 2.031 .591 .461 .052 51.60 22.25 11.70 .751 1.32 .461 .052 51.60 25.42 11.70 1.32 2.031 .876 .461 .052 52.00 28.60 11.70 1.32 2.031 2.047 1.001 .461 .052 55.10 31.77 14.35 1.126 2.15 .565 .085 55.10 34.95 14.35 2.15 2.169 2.169 1.251 .565 .085 55.10 38.12 15.20 2.15 2.169 1.376 1.501 .598 D Max F Max G Max J M Max 18.25 15.09 20.99 3.70 E 7.45 3.13 .826 .293 .123 .146 20.25 18.26 24.19 9.00 3.13 3.70 .719 .797 .594 .354 .123 .146 24.75 20.62 26.54 13.30 3.13 3.70 .974 .719 .524 .123 .146 27.75 23.00 28.89 16.50 3.13 3.70 1.093 .812 .952 .650 .123 .146 30.05 24.61 31.29 18.50 3.13 3.70 1.183 .906 1.045 .728 .123 .146 34.15 26.97 33.69 21.90 3.13 3.70 1.344 .969 1.137 .862 .123 .146 37.25 29.36 36.89 25.10 3.13 3.70 1.467 1.062 1.232 .988 .123 .146 40.45 31.75 39.99 28.20 3.13 3.70 1.593 1.156 1.326 1.250 1.452 1.110 .123 .146 43.65 34.92 43.15 31.40 1.574 3.81 3.70 .150 .146 .085 1.719 1.375 1.699 1.236 B Max C Max D Max E F Max min Max 47.60 12.03 11.70 1.32 14.40 15.09 Square flange receptacle with straight sealing gland backshell solder 00 J shell L Max size solder HE 301 B 00 J 08 10 L 4 Holes OJ 12 F 16 E OD OA OG 14 18 B C 20 22 24 1.874 A .461 .052 47.60 15.01 11.70 1.32 1.874 .474 .461 .052 48.70 19.07 11.70 1.32 1.917 .591 .461 .052 53.50 22.25 11.70 1.32 2.106 .751 .461 .052 59.00 25.42 11.70 1.32 2.323 .876 .461 .052 65.00 28.60 11.70 1.32 2.559 1.001 .461 .052 79.10 31.77 14.35 2.15 3.114 1.126 .565 .085 80.00 34.95 14.35 2.15 3.150 1.251 .565 .085 90.00 38.12 15.20 2.15 3.543 1.376 1.501 .598 .085 G J 20.99 5.02 5.84 .594 .826 .198 .230 .123 17.60 18.26 24.19 5.94 6.76 3.13 .234 .266 .123 9.34 10.16 3.13 .567 .719 .952 21.10 20.62 .693 26.54 .831 .812 24.40 23.00 .961 .906 27.60 24.61 1.087 .969 30.80 26.97 1.213 1.062 34.10 29.36 1.343 1.156 37.30 31.75 1.469 1.250 40.50 34.92 1.594 1.045 .400 .123 28.89 11.32 12.14 3.13 1.137 .368 3.13 .478 .123 31.29 14.73 15.55 3.13 1.232 .446 .612 .123 33.69 16.00 16.82 3.13 1.326 .580 .662 .123 36.89 16.89 17.70 3.13 1.452 .630 .697 .123 39.99 17.78 18.60 3.13 1.574 .665 .732 .123 43.15 20.34 21.16 .700 3.81 1.375 1.699 .801 .833 E F Max min Max .150 Square flange receptacle with straight sealing gland and cable clamp solder 00 JC shell L Max size solder MS 3110J 08 10 L 4 Holes OJ F 12 E OD OG OA 14 16 18 20 22 24 177 B Max C Max D Max 57.68 12.03 11.70 1.32 19.90 15.09 2.271 A .461 .052 57.68 15.01 11.70 1.32 2.271 .474 .461 .052 61.24 19.07 11.70 1.32 2.411 .591 .461 .052 66.01 22.25 11.70 1.32 2.599 .751 .461 .052 74.75 25.42 11.70 1.32 2.943 .876 .461 .052 80.57 28.60 11.70 1.32 3.172 1.001 .461 .052 91.69 31.77 14.35 2.15 3.610 1.126 .565 .085 95.66 34.95 14.35 2.15 3.766 1.251 .565 .085 101.22 38.12 15.20 2.15 3.985 1.376 1.501 .598 .085 G J 20.99 5.02 5.84 .594 .826 .198 .230 .123 21.50 18.26 24.19 5.94 6.76 3.13 .234 .266 .123 9.34 10.16 3.13 .783 .719 .952 25.00 20.62 .846 26.54 .984 .812 27.80 23.00 1.094 .906 29.40 24.61 1.157 .969 35.30 26.97 1.390 1.062 35.30 29.36 1.390 1.156 41.10 31.75 1.618 1.250 42.40 34.92 1.669 1.375 1.045 .400 .123 28.89 11.32 12.14 3.13 1.137 .368 3.13 .478 .123 31.29 14.73 15.55 3.13 1.232 .446 .612 .123 33.69 16.00 16.82 3.13 1.326 .580 .662 .123 36.89 16.89 17.70 3.13 1.452 .630 .697 .123 39.99 17.78 18.60 3.13 1.574 .665 .732 .123 43.15 20.34 21.16 3.81 1.699 .700 .801 .833 .150 26482 Series I Solder Connectors Jam nut receptacle with backnut shell size solder HE 301 B 07 E MS 3114 E 07 E 08 crimp HE 301 B 07 R MS 3124 E VG 95328 D 07 R L 10 12 14 P OF 16 S OA OD 18 20 22 C B 24 L Max solder A B Max crimp 34.10 33.50 C Max D Max 12.03 17.90 2.64 1.319 .474 .705 .104 34.10 33.50 15.01 17.90 2.64 1.343 1.319 .591 .705 .104 34.10 33.50 1.343 19.07 17.90 2.64 1.319 .751 .705 .104 34.10 33.50 1.343 22.25 17.90 2.64 1.319 .876 .705 .104 34.10 33.50 1.343 25.42 17.90 2.64 1.319 1.001 .705 .104 34.10 33.50 1.343 28.60 17.90 2.64 1.319 1.126 .705 .104 39.30 37.90 1.343 31.77 22.45 3.44 1.492 1.251 .884 .135 39.30 37.90 1.547 34.95 22.45 3.44 1.492 1.376 .884 .135 39.30 37.90 38.12 23.30 3.44 1.492 1.501 .917 .135 1.547 1.547 P Max S Max 18.50 26.94 19.29 23.94 .728 F Max .759 .943 21.70 30.14 22.38 26.94 .854 1.061 .881 1.061 24.90 34.94 27.13 31.74 .980 1.187 1.068 1.250 28.10 38.04 30.33 34.94 1.106 1.376 1.194 1.376 31.20 41.24 33.48 38.24 1.228 1.498 1.318 1.506 34.40 44.44 36.68 41.34 1.354 1.624 1.444 1.628 38.30 49.14 39.83 46.04 1.508 1.750 1.568 1.813 41.50 52.24 43.03 49.24 1.634 1.935 1.694 1.939 44.70 55.54 46.18 52.74 1.760 2.057 2.187 1.818 2.076 G P Max S Max Jam nut receptacle with straight cable clamp L Max shell size solder crimp solder HE 301 B 07 EC MS 3114 F HE 301 B 07 AC 07 EC 07 AC crimp 08 10 HE 301 B 07 RC MS 3124 F VG 95328 E 07 RC 12 L 14 P OF 16 S D OA OG 18 20 22 B C 24 A B Max 49.31 49.10 12.03 17.90 1.941 1.933 .474 .705 49.31 49.10 15.01 17.90 1.941 1.933 .591 .705 49.17 49.10 19.07 17.90 1.936 1.933 .751 .705 49.17 49.10 22.25 17.90 1.936 1.933 .876 .705 52.34 52.20 25.42 17.90 2.061 2.055 1.001 .705 53.22 53.10 28.60 17.90 2.095 2.091 1.126 .705 58.10 58.00 31.77 22.45 2.287 2.283 1.251 .884 58.10 58.00 34.95 22.45 2.287 2.283 1.376 .884 58.10 58.00 38.12 23.30 2.287 2.283 1.501 .917 C Max D Max F Max 2.64 19.90 26.94 .104 .783 1.061 2.64 21.50 30.14 .104 .846 1.187 2.64 25.00 34.94 .104 .984 1.376 3.50 19.29 23.94 .138 .759 .943 5.00 22.38 26.94 .197 .881 1.061 8.20 27.13 31.74 .323 1.068 1.250 2.64 27.80 38.04 10.00 30.33 34.94 .104 1.094 1.498 .394 1.194 1.376 2.64 29.40 41.24 13.00 33.48 38.24 .104 1.157 1.624 .512 1.318 1.506 2.64 35.30 44.44 16.00 36.68 41.34 .104 1.390 1.750 .630 1.444 1.628 3.44 35.30 49.14 16.00 39.83 46.04 .135 1.390 1.935 .630 1.568 1.813 3.44 41.10 52.24 19.30 43.03 49.24 .135 1.618 2.057 .760 1.694 1.939 3.44 42.40 55.54 20.60 46.18 52.74 .135 1.669 2.187 D Max F Max .811 1.818 2.076 P Max S Max Jam nut receptacle with straight backshell for potting L Max shell size solder crimp solder HE 301 B 07 P MS 3114 P 07 P 08 crimp HE 301 B 07 RP MS 3124 P 07 RP 10 12 L OF 14 P 16 S D OG OA 18 20 22 B C 24 178 A B Max 34.30 39.80 12.03 17.90 1.350 1.567 .474 .705 34.30 39.80 15.01 17.90 1.350 1.567 .591 .705 34.30 39.80 19.07 17.90 1.350 1.567 .751 .705 34.30 39.80 22.25 17.90 1.350 1.567 .876 .705 34.30 39.80 25.42 17.90 1.350 1.567 1.001 .705 34.10 41.80 28.60 17.90 1.343 1.646 1.126 .705 42.25 49.92 31.77 22.45 1.663 1.965 1.251 .884 42.25 49.92 34.95 22.45 1.663 1.965 1.376 .884 43.26 51.30 38.12 23.30 1.703 2.020 1.501 .917 C Max G Max 2.64 15.34 26.94 10.46 19.29 23.94 .104 .604 1.061 .412 .759 .943 2.64 17.70 30.14 13.55 22.38 26.94 .104 .697 1.187 .533 .881 1.061 2.64 21.69 34.94 13.96 27.13 31.74 .104 .854 1.376 .550 1.068 1.250 2.64 23.90 38.04 17.42 30.33 34.94 .104 .941 1.498 .686 1.194 1.376 2.64 27.00 41.24 20.56 33.48 38.24 .104 1.063 1.624 .809 1.318 1.506 2.64 30.50 44.44 23.66 36.68 41.34 .104 1.201 1.750 .931 1.444 1.628 3.44 33.65 49.14 23.92 39.83 46.04 .135 1.325 1.935 .942 1.568 1.813 3.44 37.10 52.24 25.52 43.03 49.24 .135 1.461 2.057 1.005 1.694 1.939 3.44 40.00 55.54 32.00 46.18 52.74 .135 1.575 2.187 1.260 1.818 2.076 26482 Series I Solder Connectors Jam nut receptacle with straight backshell for heatshrink sleeving solder 07 T crimp 07 RT shell L Max size solder crimp VG 08 95328 S 10 L 12 P OF 16 S OD OG OA 14 18 M B 20 C 22 24 B C D F G Max M P S Max Max Max Max solder crimp Max Max Max A 42.60 41.50 12.03 17.90 2.64 15.35 26.94 7.20 6.70 3.70 19.29 23.94 1.677 1.634 .474 .705 .104 .604 1.061 .283 .264 .146 .759 .943 42.60 41.50 15.01 17.90 2.64 18.15 30.14 10.20 9.40 3.70 22.38 26.94 1.677 1.634 .591 .705 .104 .715 1.187 .402 .370 .146 .881 1.061 42.60 41.50 19.07 17.90 2.64 23.45 34.94 13.20 11.95 3.70 27.13 31.74 1.677 1.634 .751 .705 .104 .923 1.376 .520 .470 .146 1.068 1.250 42.60 41.50 22.25 17.90 2.64 24.25 38.04 16.10 15.15 3.70 30.33 34.94 1.677 1.634 .876 .705 .104 .955 1.498 .634 .596 .146 1.194 1.376 44.40 43.80 25.42 17.90 2.64 29.55 41.24 19.25 18.05 3.70 33.48 38.24 1.748 1.724 1.001 .705 .104 1.163 1.624 .758 .711 .146 1.318 1.506 44.40 43.80 28.60 17.90 2.64 31.75 44.44 21.30 19.95 3.70 36.68 41.24 1.748 1.724 1.126 .705 .104 1.250 1.750 .839 .785 .146 1.444 1.624 50.90 49.80 31.77 22.45 3.44 35.85 49.14 24.40 23.05 3.70 39.83 46.04 2.004 1.961 1.251 .884 .135 1.411 1.935 .961 .907 .146 1.568 1.813 50.90 49.80 34.95 22.45 3.44 38.20 52.24 27.50 25.55 3.70 43.03 49.24 2.004 1.961 1.376 .884 .135 1.504 2.057 1.083 1.006 .146 1.694 1.939 49.60 48.50 38.12 23.30 3.44 41.30 55.54 30.60 28.65 3.70 46.18 52.74 1.953 1.909 1.501 .917 .135 1.626 2.187 1.205 1.128 .146 1.818 2.076 Jam nut receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix) solder 07 T crimp 07 RT shell L Max size solder A crimp 08 10 12 L P OF 14 B C S OD OA OG 16 18 20 M 22 24 B Max C Max 60.00 12.03 17.90 2.64 2.362 .474 .705 .104 60.00 15.01 17.90 2.64 2.362 .591 .705 .104 60.00 19.07 17.90 2.64 2.362 .751 .705 .104 60.00 22.25 17.90 2.64 2.362 .876 .705 .104 60.00 25.42 17.90 2.64 2.362 1.001 .705 .104 60.40 28.60 17.90 2.64 2.378 1.126 .705 .104 63.40 31.77 22.45 3.44 2.496 1.251 .884 .135 63.40 34.95 22.45 3.44 2.496 1.376 .884 .135 63.40 38.12 23.30 3.44 2.496 1.501 .917 .135 D Max F Max G Max M Max 18.25 26.94 7.45 3.70 19.29 23.94 .719 1.061 .293 20.25 30.14 9.00 .797 1.187 .354 24.75 34.94 13.30 .974 1.376 .524 27.75 38.04 16.50 1.093 1.498 .650 30.05 41.24 18.50 1.183 1.624 .728 34.15 44.44 21.90 1.344 1.750 .862 37.25 49.14 25.10 1.467 1.935 .988 40.45 52.24 28.20 1.593 2.057 1.110 43.65 55.54 31.40 .146 P Max .759 S Max .943 3.70 22.38 26.94 .146 .881 1.061 3.70 27.13 31.74 .146 1.068 1.250 3.70 30.33 34.94 .146 1.194 1.376 3.70 33.48 38.24 .146 1.318 1.506 3.70 36.68 41.34 .146 1.444 1.628 3.70 39.83 46.04 .146 1.568 1.813 3.70 43.03 49.24 .146 1.694 1.939 3.70 46.18 52.74 1.719 2.187 1.236 .146 1.818 2.076 D Max F Max G Max M Max P Max S Max 2.64 16.30 26.94 7.45 3.60 19.29 23.94 Jam nut receptacle with removable straight backshell for screen termination and heatshrink sleeving solder 07 G crimp 07 RG shell L Max size solder A crimp 08 VG 95328 T 10 L 12 P 14 16 S OA OG OD OF 18 B C 20 M 22 24 179 B Max 62.20 12.03 11.90 2.449 .474 .469 62.20 15.01 17.90 2.449 .591 .705 62.20 19.07 17.90 2.449 .751 .705 62.40 22.25 17.90 2.457 .876 .705 62.40 25.42 17.90 2.457 1.001 .705 62.40 28.60 17.90 2.457 1.126 .705 67.50 31.77 22.45 2.657 1.251 .884 67.50 34.95 22.45 2.657 1.376 .884 67.50 38.12 23.30 2.657 1.501 .917 C Max .104 .642 1.061 .293 2.64 18.30 30.14 10.30 .104 .720 1.187 .406 2.64 22.30 34.94 13.20 .104 .878 1.376 .520 2.64 25.30 38.04 16.50 .104 .996 1.498 .650 2.64 28.30 41.24 19.35 .104 1.114 1.624 .762 2.64 32.30 44.44 21.60 .104 1.272 1.750 .850 3.44 34.30 49.14 24.80 .135 1.350 1.935 .976 3.44 38.30 52.24 27.90 .135 1.508 2.057 1.098 3.44 41.30 55.54 31.00 .135 1.626 2.187 1.220 .142 .759 .943 3.60 22.38 26.94 .142 .881 1.061 3.60 27.13 31.74 .142 1.068 1.250 3.60 30.33 34.94 .142 1.194 1.376 3.60 33.48 38.24 .142 1.318 1.506 3.60 36.68 41.34 .142 1.444 1.628 3.60 39.83 46.04 .142 1.568 1.813 3.60 43.03 49.24 .142 1.694 1.939 3.60 46.18 52.74 .142 1.818 2.076 26482 Series I Solder Connectors Square flange receptacle not accepting backshell solder shell size HE 301 B 02 E MS 3112 E VG 95328 H 02 E 08 crimp 10 HE 301 B 02 R MS 3122 E VG 95328 C 02 R 12 14 4 holes oJ L E 16 F oD oA 18 20 B 22 C 24 L Max solder crimp 25.18 32.35 .991 10.84 15.09 20.99 .052 .427 .594 .826 .123 15.01 11.70 1.32 13.99 18.26 24.19 3.13 .461 .052 .551 .719 .952 .123 19.07 11.70 1.32 17.37 20.62 26.54 3.13 .461 .052 .684 .812 1.045 .123 22.25 11.70 1.32 20.57 23.00 28.89 3.13 .876 .461 .052 .810 .906 1.137 .123 25.42 11.70 1.32 23.72 24.61 31.29 3.13 1.274 1.001 .461 .052 .934 .969 1.232 .123 28.60 11.70 1.32 26.69 26.97 33.69 3.13 1.274 1.126 .461 .052 1.051 1.062 1.326 .123 31.77 14.35 2.15 29.89 29.36 36.89 3.13 1.337 1.251 .565 .085 1.177 1.156 1.452 .123 34.95 14.35 2.15 33.04 31.75 39.99 3.13 1.337 1.376 26.67 33.95 1.050 3.13 1.32 .461 1.274 26.67 33.95 1.050 12.03 11.70 .751 26.67 33.95 1.050 J 1.274 25.10 32.35 .988 F Max .591 25.10 32.35 .988 E 1.274 25.10 32.35 .988 D Max .474 25.10 32.35 .988 C Max 1.274 25.10 32.35 .988 B Max A .565 .085 1.301 1.250 1.574 .123 38.12 15.20 2.15 36.24 34.92 43.15 3.81 .085 1.427 1.375 1.699 .150 1.337 1.501 .598 Jam nut receptacle not accepting backshell solder 07 A shell size HE 301 B 07 A 08 10 12 P L 14 S oA 16 18 20 oF C B 22 24 L Max solder A B Max C Max F Max P Max S Max 25.18 12.03 17.90 2.64 26.94 19.29 23.94 .991 .474 .705 .104 1.061 .759 .943 25.10 15.01 17.90 2.64 30.14 22.38 26.94 .988 .591 .705 .104 1.187 .881 1.061 25.10 19.07 17.90 2.64 34.94 27.13 31.74 .988 .751 .705 .104 1.376 1.068 1.250 25.10 22.25 17.90 2.64 38.04 30.33 34.94 .988 .876 .705 .104 1.498 1.194 1.376 25.10 25.42 17.90 2.64 41.24 33.48 38.24 .988 1.001 .705 .104 1.624 1.318 1.506 25.10 28.60 17.90 2.64 44.44 36.68 41.34 .988 1.126 .705 .104 1.750 1.444 1.628 26.67 31.77 22.45 3.44 49.14 39.83 46.04 1.050 1.251 .884 .135 1.935 1.568 1.813 26.67 34.95 22.45 3.44 52.24 43.03 49.24 1.050 1.376 .884 .135 2.057 1.694 1.939 26.67 38.12 23.30 3.44 55.54 46.18 52.74 1.050 1.501 .917 .135 2.187 1.818 2.076 Cable connecting receptacle with backnut solder shell L Max size solder crimp HE 301 B 01 E MS 3111 E 01 E 08 crimp HE 301 B 01 R MS 3121 E 01 R 10 12 L 14 P 18 oD oA 16 20 B C oF 22 24 180 A B Max C Max D Max F Max P Max 20.99 32.70 32.00 12.03 10.60 2.10 13.50 24.24 1.287 1.260 .474 .417 .083 .531 .954 .826 32.70 32.00 15.01 10.60 2.10 16.70 27.44 24.19 1.287 1.260 .591 .417 .083 .657 1.080 .952 32.70 32.00 19.07 10.60 2.10 19.90 29.79 26.54 1.287 1.260 .751 .417 .083 .783 1.173 1.045 32.70 32.00 22.25 10.60 2.10 23.40 32.10 28.89 1.287 1.260 .876 .417 .083 .921 1.264 1.137 32.70 32.00 25.42 10.60 2.10 26.60 34.59 31.29 1.287 1.260 1.001 .417 .083 1.047 1.362 1.232 32.70 32.00 28.60 10.60 2.10 29.50 36.94 33.69 1.287 1.260 1.126 .417 .083 1.161 1.454 1.326 34.50 33.40 31.77 13.85 2.65 32.70 40.14 36.89 1.358 1.315 1.251 .545 .104 1.287 1.580 1.452 34.50 33.40 34.95 13.85 2.65 36.00 43.24 40.00 1.358 1.315 1.376 .545 .104 1.417 1.702 1.575 34.50 33.40 38.12 14.70 2.65 39.10 46.44 43.29 1.358 1.315 1.501 .579 .104 1.539 1.828 1.704 26482 Series I Solder Connectors Cable connecting receptacle with straight cable clamp L Max shell size solder crimp solder 01 EC 01 AC crimp 01 RC HE 301 B 01 EC MS 3111 F HE 301 B 01 AC 08 10 HE 301 B 01 RC MS 3121 F 12 L 14 P 18 D oG oD oA 16 20 B C 22 oF 24 48.00 47.30 1.890 1.862 48.00 47.30 1.890 1.862 48.00 47.30 1.890 1.862 48.00 47.30 1.890 1.862 51.00 50.50 2.008 1.988 51.00 50.50 2.008 1.988 53.00 51.50 2.087 2.028 53.00 51.50 2.087 2.028 53.00 51.50 2.087 2.028 B Max C Max D Max F Max 12.03 10.60 A 2.10 19.90 24.24 .417 .083 .783 .954 15.01 10.60 2.10 21.50 27.44 .474 .417 .083 .846 1.080 19.07 10.60 .591 2.10 25.00 29.79 .417 .083 .984 1.173 22.25 10.60 .751 2.10 27.80 32.10 .417 .083 1.094 1.264 25.42 10.60 .876 2.10 29.40 34.59 .417 .083 1.157 1.362 28.60 10.60 1.001 2.10 35.30 36.94 .417 .083 1.390 1.454 31.77 13.85 1.126 2.65 35.30 40.14 .545 .104 1.390 1.580 34.95 13.85 1.251 2.65 41.10 43.24 .545 .104 1.618 1.702 38.12 14.70 1.376 2.65 42.40 46.44 .579 .104 1.669 1.828 B Max C Max D Max 12.03 10.60 1.501 G Max P Max 3.50 20.99 .138 .826 5.00 24.19 .197 .952 8.20 26.54 .323 1.045 10.00 28.89 .394 1.137 13.00 31.29 .512 1.232 16.00 33.69 .630 1.326 16.00 36.89 .630 1.452 19.30 40.00 .760 1.575 20.60 43.29 .811 1.704 F Max G Max P Max 10.46 20.99 Cable connecting receptacle with straight backshell for potting L Max shell size solder crimp solder 01 P HE 301 B 01 P MS 3111 P 08 crimp 01 RP HE 301 B 01 RP MS 3121 P 10 12 L P 14 oD oG oA 16 18 20 oF B C 22 24 36.20 41.70 1.425 1.642 36.20 41.70 1.425 1.642 36.20 41.70 1.425 1.642 36.20 41.70 1.425 1.642 36.20 41.70 1.425 1.642 36.91 44.46 1.453 1.750 43.80 50.93 1.724 2.005 43.80 50.93 1.724 2.005 43.80 50.93 1.724 2.005 A 2.10 15.34 24.24 .417 .083 .604 .954 15.01 10.60 2.10 17.70 27.44 .474 .417 .083 .697 1.080 19.07 10.60 .591 2.10 21.69 29.79 .417 .083 .854 1.173 22.25 10.60 .751 2.10 23.90 32.10 .417 .083 .941 1.264 25.42 10.60 .876 2.10 27.00 34.59 .417 .083 1.063 1.362 28.60 10.60 1.001 2.10 30.50 36.94 .417 .083 1.201 1.454 31.77 13.85 1.126 2.65 33.65 40.15 .545 .104 1.325 1.581 34.95 13.85 1.251 2.65 37.10 42.24 .545 .104 1.461 1.663 38.12 14.70 1.376 2.65 40.00 46.44 .579 .104 1.575 1.828 B Max C Max D Max F Max 10.60 2.10 14.50 24.24 1.501 .412 .826 13.55 24.19 .533 .952 13.96 26.54 .550 1.045 17.42 28.89 .686 1.137 20.56 31.29 .809 1.232 23.66 33.69 .931 1.326 23.92 36.89 .942 1.452 25.52 40.00 1.005 1.575 32.00 43.29 1.260 1.704 Cable connecting receptacle with straight adapter solder 01 A crimp 01 RA shell size HE 301 B 01 A 08 HE 301 B 01 RA 10 12 L P 14 K oD oA oG 16 18 20 B C oF 22 24 181 L Max solder A crimp 41.00 12.03 1.614 .474 .417 41.00 15.01 10.60 .591 .417 41.00 19.07 1.614 10.60 .751 .417 41.00 22.25 1.614 10.60 .876 .417 41.00 25.42 1.614 10.60 1.001 .417 41.00 28.60 1.614 10.60 1.126 .417 44.00 31.77 1.614 13.85 1.251 .545 44.00 34.95 1.732 13.85 1.376 .545 44.00 38.12 1.732 14.70 1.732 1.501 .579 .083 K P Threading UNEF 2 A Max 9.10 1/2 28 20.99 G Max .571 .954 .358 .826 2.10 18.70 27.44 12.08 5/8 24 24.19 .736 1.080 .476 .952 2.10 21.70 .083 29.79 15.25 3/4 20 26.54 .854 1.173 .600 1.045 2.10 25.10 .083 32.10 18.15 7/8 20 28.89 .988 1.264 .715 1.137 2.10 28.13 .083 34.59 21.32 1-20 31.29 .839 1.232 1.107 1.362 2.10 31.38 .083 36.94 1.235 1.454 2.65 34.30 .083 40.15 1.350 1.581 2.65 37.60 .104 42.24 1.480 1.663 2.65 40.70 .104 46.44 .104 1.602 1.828 24.32 1-3/16 18 33.69 .957 1.326 26.73 1-3/16 18 36.89 1.052 1.452 30.67 1-7/16 18 40.00 1.207 1.575 33.08 1-7/16 l8 43.29 1.302 1.704 26482 Series I Solder Connectors Cable connecting receptacle with straight backshell for heatshrink sleeving solder 01 T crimp 01 RT shell L Max size solder crimp 08 10 12 P L 14 oD oA oG 16 18 20 M B oF C 22 24 A B Max 36.70 36.00 12.03 10.60 1.445 1.417 .474 .417 36.70 36.00 15.01 10.60 1.445 1.417 .591 .417 36.70 36.00 19.07 10.60 1.445 1.417 .751 .417 36.70 36.00 22.25 10.60 1.445 1.417 .876 .417 39.00 38.30 25.42 10.60 1.535 1.508 1.001 .417 39.00 38.30 28.60 10.60 1.535 1.508 1.126 .417 45.30 44.20 31.77 13.85 1.783 1.740 1.251 .545 45.30 44.20 34.95 13.85 1.783 1.740 1.376 .545 44.00 42.60 38.12 14.70 1.732 1.677 1.501 .579 C Max D Max F G Max Max solder crimp P Max M Max 3.70 2.10 15.35 24.24 7.20 6.70 20.99 .083 .283 .264 .604 .826 .146 2.10 18.15 27.44 10.20 9.40 24.19 3.70 .083 .370 .952 .146 2.10 23.45 29.70 13.20 11.95 26.54 3.70 .083 .715 .954 .402 1.045 .146 2.10 24.25 32.10 16.10 15.15 28.89 3.70 .083 .923 1.080 .520 1.137 .146 3.70 .634 1.232 .146 3.70 .758 1.326 .146 3.70 .839 1.452 .146 3.70 1.504 1.581 .785 2.65 38.20 42.24 27.50 25.55 40.00 .104 1.411 1.454 .711 2.65 35.85 40.15 24.40 23.05 36.89 .104 1.250 1.362 .596 2.10 31.75 36.94 21.30 19.95 33.69 .083 1.163 1.264 .470 2.10 29.55 34.59 19.25 18.05 31.29 .083 .955 1.169 1.575 .146 3.70 .104 .146 1.828 1.083 .907 2.65 41.30 46.44 30.60 28.65 43.29 1.626 1.663 .961 1.205 1.006 1.128 1.704 Cable connecting receptacle with removable straight backshell for heatshrink sleeving shell L Max A size solder crimp 50.00 12.03 08 solder 01 M crimp 01 RM 1.969 10 12 L P 14 B oD oA oG 16 18 20 oF M C 22 24 B Max C Max D Max F Max 10.60 2.10 13.55 .474 .417 50.00 15.01 10.60 .591 .417 50.00 19.07 1.969 10.60 .751 .417 50.00 22.25 1.969 10.60 .876 .417 50.00 25.42 1.969 10.60 1.001 .417 50.00 28.60 1.969 10.60 1.126 .417 53.30 31.77 1.969 13.85 1.251 .545 53.30 34.95 2.098 13.85 1.376 .545 53.30 38.12 2.098 14.70 2.098 1.501 .579 G Max P Max M Max 3.50 24.24 7.05 20.99 .533 .954 .278 .826 .138 2.10 15.35 27.44 9.90 24.19 3.50 .083 .604 1.080 .390 .952 .138 2.10 19.48 .083 29.79 12.60 26.54 3.50 .767 1.173 .496 1.045 .138 2.10 21.30 .083 32.10 15.90 28.89 3.50 .839 1.264 .626 1.137 .138 2.10 24.50 .083 34.59 18.95 31.29 3.50 .965 1.362 .746 1.232 .138 2.10 26.45 .083 36.94 20.90 33.69 3.50 1.041 1.454 .823 1.326 .138 2.65 30.75 .083 40.15 23.70 36.89 3.50 1.211 1.581 .933 1.452 .138 2.65 34.24 .104 42.24 26.60 40.00 3.50 1.348 1.663 1.047 1.575 .138 2.65 36.47 .104 46.44 29.30 43.29 3.50 1.154 1.704 .138 .104 1.436 1.828 B Max C Max D Max F Max 10.60 2.10 18.25 Cable connecting receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix) shell L Max A size solder crimp 51.60 12.03 08 solder 01 T crimp 01 RT 2.031 10 L 12 P 16 oD oG oA 14 18 B C M oF 20 22 24 182 .474 .417 51.60 15.01 10.60 .591 .417 51.60 19.07 2.031 10.60 .751 .417 51.60 22.25 2.031 10.60 .876 .417 51.60 25.42 2.031 10.60 1.001 .417 52.00 28.60 2.031 10.60 1.126 .417 55.10 31.77 2.047 13.85 1.251 .545 55.10 34.95 2.169 13.85 1.376 .545 55.10 38.12 2.169 14.70 2.169 1.501 .579 G Max 24.24 7.45 .719 .954 .293 2.10 20.25 27.44 9.00 .083 .797 1.080 .354 2.10 24.75 .083 29.79 13.30 .974 1.173 .524 2.10 27.75 .083 32.10 16.50 1.093 1.264 .650 2.10 30.05 .083 34.59 18.50 1.183 1.362 .728 2.10 34.15 .083 36.94 21.90 1.344 1.454 .862 2.65 37.25 .083 40.15 25.10 1.467 1.581 .988 2.65 40.45 .104 42.24 28.20 1.593 1.663 1.110 2.65 43.65 .104 46.44 31.40 1.828 1.236 .104 1.719 M Max P Max 3.70 20.99 .146 .826 3.70 24.19 .146 .952 3.70 26.54 .146 1.045 3.70 28.89 .146 1.137 3.70 31.29 .146 1.232 3.70 33.69 .146 1.326 3.70 36.89 .146 1.452 3.70 40.00 .146 1.575 3.70 43.29 .146 1.704 26482 Series I Solder Connectors Cable connecting receptacle with removable straight backshell for screen termination and heatshrink sleeving shell L Max A size solder crimp 54.00 12.03 08 solder 01 G crimp 01 RG 12 L P 14 oD oG oA 16 18 20 B C oF M 22 24 C Max D Max F Max 10.60 2.10 16.30 .474 .417 54.00 15.01 10.60 2.126 10 B Max .591 .417 54.00 19.07 10.60 2.126 .751 .417 54.00 22.25 10.60 2.126 .876 .417 54.00 25.42 2.126 10.60 1.001 .417 54.00 28.60 2.126 10.60 1.126 .417 59.30 31.77 13.85 2.126 1.251 .545 59.30 34.95 2.335 13.85 1.376 .545 59.30 38.12 2.335 14.70 2.335 1.501 G Max M Max 24.24 7.45 .642 .954 .293 2.10 18.30 27.44 10.30 .083 .720 1.080 .406 2.10 22.30 .083 29.79 13.20 .878 1.173 .520 2.10 25.30 .083 32.10 16.50 .996 1.264 .650 2.10 28.30 .083 34.59 19.35 1.114 1.362 .762 2.10 32.30 .083 36.94 21.60 1.272 1.454 .850 2.65 34.30 .083 40.15 24.80 1.350 1.581 .976 2.65 38.30 .104 42.24 27.90 1.508 1.663 1.098 2.65 41.30 .104 46.44 31.00 .579 .104 1.626 1.828 1.220 B Max C Max D Max F Max min 10.60 2.10 14.40 P Max 3.60 20.99 .142 .826 3.60 24.19 .142 .952 3.60 26.54 .142 1.045 3.60 28.89 .142 1.137 3.60 31.29 .142 1.232 3.60 33.69 .142 1.326 3.60 36.89 .142 1.452 3.60 40.00 .142 1.575 3.60 43.29 .142 1.704 Max P Max Cable connecting receptacle with straight sealing gland backshell solder 01 J shell L Max size solder HE 301 B 01 J 08 10 12 L P 14 oG B oD oA 16 18 20 oF C 22 24 A 47.60 12.03 1.874 .474 .417 47.60 15.01 10.60 .591 .417 48.70 19.07 1.874 10.60 .751 .417 53.50 22.25 1.917 10.60 .876 .417 59.00 25.42 2.106 10.60 1.001 .417 65.00 28.60 2.323 10.60 1.126 .417 79.10 31.77 2.559 13.85 1.251 .545 80.00 34.95 3.114 13.85 1.376 .545 90.00 38.12 3.150 14.70 3.543 1.501 .579 G 24.24 5.02 .567 .954 .198 2.10 17.60 27.44 5.94 .083 .693 1.080 2.10 21.10 .083 29.79 .831 1.173 2.10 24.40 .083 32.10 .961 1.264 2.10 27.60 .083 34.59 1.087 1.362 2.10 30.80 .083 36.94 1.213 1.454 2.65 34.10 .083 40.15 1.343 1.581 2.65 37.30 .104 42.24 1.469 1.663 2.65 40.50 .104 46.44 .104 1.594 1.828 5.84 20.99 .230 .826 6.76 24.19 .234 .266 .952 9.34 10.16 26.54 .368 .400 1.045 11.32 12.14 28.89 .446 .478 1.137 14.73 15.55 31.29 .580 .612 1.232 16.00 16.82 33.69 .630 .662 1.326 16.89 17.71 36.89 .665 .697 1.452 17.78 18.60 40.00 .700 .732 1.575 20.34 21.16 43.29 .801 .833 1.704 Max P Max Cable connecting receptacle with straight sealing gland and cable clamp backshell solder 01 JC shell L Max size solder MS 3111 J 08 10 12 P L 14 B C oD oA oG 16 18 20 oF 22 24 183 A 57.68 12.03 2.271 B Max C Max D Max F Max 10.60 2.10 19.90 .474 .417 57.68 15.01 10.60 .591 .417 61.24 19.07 2.271 10.60 .751 .417 66.01 22.25 2.411 10.60 .876 .417 74.75 25.42 2.599 10.60 1.001 .417 80.57 28.60 2.943 10.60 1.126 .417 91.69 31.77 3.172 13.85 1.251 .545 95.66 34.95 3.610 13.85 1.376 .545 101.22 38.12 3.766 14.70 3.985 1.501 .579 G min 24.24 5.02 .783 .954 .198 2.10 21.50 27.44 5.94 .083 .846 1.080 2.10 25.00 .083 29.79 .984 1.173 2.10 27.80 .083 32.10 1.094 1.264 2.10 29.40 .083 34.59 1.157 1.362 2.10 35.30 .083 36.94 1.390 1.454 2.65 35.30 .083 40.15 1.390 1.581 2.65 41.10 .104 42.24 1.618 1.663 2.65 42.40 .104 46.44 .104 1.669 1.828 .234 5.84 20.99 .230 .826 6.76 24.19 .266 .952 9.34 10.16 26.54 .368 .400 1.045 11.32 12.14 28.89 .446 .478 1.137 14.73 15.50 31.29 .580 .610 1.232 16.00 16.82 33.69 .630 .662 1.326 16.89 17.71 36.89 .665 .697 1.452 17.78 18.60 40.00 .700 .732 1.575 20.34 21.16 43.29 .801 .833 1.704 26482 Series I Solder Connectors Plug with backnut solder 06 E shell size HE 301 B 06 E MS 3116 E 08 crimp 06 R HE 301 B 06 R MS 3126 E 10 12 L 14 oA 16 oD 18 20 22 24 L Max A Max D Max 32.00 19.05 13.50 1.260 .750 .531 32.00 21.80 16.70 solder crimp 32.54 1.281 32.54 1.281 1.260 .858 .657 32.54 32.00 26.15 19.90 1.281 1.260 1.030 .783 32.54 32.00 29.35 23.40 1.281 1.260 1.156 .921 32.54 32.00 32.50 26.60 1.281 1.260 1.280 1.047 32.54 32.00 35.30 29.60 1.281 1.260 1.390 1.165 33.30 32.10 38.85 32.70 1.311 1.264 1.530 1.287 33.30 32.10 42.05 36.00 1.311 1.264 1.656 1.417 33.30 32.10 45.10 39.10 1.311 1.264 1.776 1.539 Plug with straight cable clamp solder 06 EC 06 AC crimp 06 RC shell size HE 301 B 06 EC MS 3116 F HE 301 B 06 AC 08 10 HE 301 B 06 RC MS 3126 F VG 95328 K 12 14 L oA 16 D oG 18 20 22 24 L Max solder crimp A Max D Max G 3.50 48.00 47.30 19.05 19.90 1.890 1.862 .750 .783 .138 48.00 47.30 21.80 21.50 5.00 1.890 1.862 .858 .846 .197 48.00 47.30 26.15 25.00 8.20 1.890 1.862 1.030 .984 .323 48.00 47.30 29.35 27.80 10.00 1.890 1.862 1.156 1.094 .394 51.00 50.50 32.50 29.40 13.00 2.008 1.988 1.280 1.157 .512 51.00 50.50 35.30 35.30 16.00 2.008 1.988 1.390 1.390 .630 52.00 50.20 38.85 35.30 16.00 2.047 1.976 1.530 1.390 .630 52.00 50.20 42.05 41.10 19.30 2.047 1.976 1.656 1.618 .760 52.00 50.20 45.10 42.40 20.60 2.047 1.976 1.776 1.669 .811 Plug with straight backshell for potting solder 06 P shell size HE 301 B 06 P MS 3116 P 08 crimp HE 301 B 06 RP MS 3126 P 10 12 L oA 14 oD 16 oG 06 RP 18 20 22 24 184 L Max solder crimp A Max D Max G Max 10.46 36.20 42.10 19.05 15.34 1.425 1.657 .750 .604 .412 36.20 42.10 21.80 17.70 13.55 1.425 1.657 .858 .697 .533 36.20 42.10 26.15 21.69 13.96 1.425 1.657 1.030 .854 .550 36.20 42.10 29.35 23.90 17.42 1.425 1.657 1.156 .941 .686 36.20 42.10 32.50 27.00 20.56 1.425 1.657 1.280 1.063 .809 37.70 45.40 35.30 30.50 23.66 1.484 1.787 1.390 1.201 .931 42.40 50.00 38.85 33.65 23.92 1.669 1.969 1.530 1.325 .942 42.40 50.00 42.05 37.10 25.52 1.669 1.969 1.656 1.461 1.005 42.85 50.00 45.10 40.00 32.00 1.687 1.969 1.776 1.575 1.260 26482 Series I Solder Connectors Plug with straight adapter solder 06 A crimp 06 RA L Max solder crimp shell size HE 301 B 06 A oA oD K oG L D Max G Max 41.00 41.00 19.05 14.50 9.10 1.614 1.614 .750 .571 .358 10 41.00 41.00 21.80 18.70 12.08 1.614 1.614 .858 .736 .476 12 41.00 41.00 26.15 21.70 15.25 1.614 1.614 1.030 .854 .600 14 41.00 41.00 29.35 25.10 18.15 1.614 1.614 1.156 .988 .715 16 41.00 41.00 32.50 28.13 21.32 1.614 1.614 1.280 1.107 .839 18 41.00 41.00 35.30 31.38 24.32 1.614 1.614 1.390 1.235 .957 20 44.00 43.30 38.85 34.30 26.73 1.732 1.705 1.530 1.350 1.052 22 44.00 43.30 42.05 37.60 30.67 1.732 1.705 1.656 1.480 1.207 24 44.00 43.50 45.10 40.70 33.08 1.732 1.713 1.776 1.602 1.302 08 HE 301 B 06 RA A Max K Threading UNEF 2 A 1/2 28 5/8 24 3/4 20 7/8 20 1-20 1-3/16 18 1-3/16 18 1-7/16 18 1-7/16 18 Plug with straight backshell for heatshrink sleeving solder 06 T crimp 06 RT shell size L Max solder crimp 08 VG 95328 J 10 12 L oA 14 oD oG 16 18 20 M 22 24 A D Max G Max solder crimp M Max 36.70 36.00 19.05 15.35 7.20 6.70 1.445 1.417 .750 .604 .283 .264 3.70 .146 36.70 36.00 21.80 18.15 10.20 9.40 3.70 1.445 1.417 .858 .715 .402 .370 .146 36.70 36.00 26.15 23.45 13.20 11.95 3.70 1.445 1.417 1.030 .923 .520 .470 .146 36.70 36.00 29.35 24.25 16.10 15.15 3.70 1.445 1.417 1.156 .955 .634 .596 .146 39.00 38.30 32.50 29.55 19.25 18.05 3.70 1.535 1.508 1.280 1.163 .758 .711 .146 39.00 38.30 35.30 31.75 21.30 19.95 3.70 1.535 1.508 1.390 1.250 .839 .785 .146 44.00 42.90 38.85 35.85 24.40 23.05 3.70 1.732 1.689 1.530 1.411 .961 .907 .146 44.00 42.90 42.05 38.20 27.50 25.55 3.70 1.732 1.689 1.656 1.504 1.083 1.006 .146 42.70 41.60 45.10 41.30 30.60 28.65 3.70 1.681 1.638 1.776 1.626 1.205 1.128 .146 Plug with removable straight backshell for heatshrink sleeving solder 06 M crimp 06 RM shell size 08 10 12 L oA 14 oD oG 16 18 20 M 22 24 185 L Max solder/crimp A Max D Max G Max M Max 50.00 19.05 13.55 7.05 1.969 .750 .533 .278 .138 50.00 21.80 15.35 9.90 3.50 3.50 1.969 .858 .604 .390 .138 50.00 26.15 19.48 12.60 3.50 1.969 1.030 .767 .496 .138 50.00 29.35 21.30 15.90 3.50 1.969 1.156 .839 .626 .138 50.00 32.50 24.50 18.95 3.50 1.969 1.280 .965 .746 .138 50.00 35.30 26.45 20.90 3.50 1.969 1.390 1.041 .823 .138 52.00 38.85 30.73 23.70 3.50 2.047 1.530 1.210 .933 .138 52.00 42.05 34.24 26.60 3.50 2.047 1.656 1.348 1.047 .138 52.00 45.10 36.47 29.30 3.50 2.047 1.776 1.436 1.154 .138 26482 Series I Solder Connectors Plug with straight sealing gland backshell solder 06 J shell size HE 301 B 06 J 08 10 12 L oA 14 oD oG 16 18 20 22 24 L Max solder A Max D Max G 47.60 19.05 14.40 5.02 1.874 .750 .567 .198 .230 47.60 21.80 17.60 5.94 6.76 Max min 5.84 1.874 .858 .693 .234 .266 49.20 26.15 21.10 9.34 10.16 1.937 1.030 .831 .368 .400 54.00 29.35 24.40 11.32 12.14 2.126 1.156 .961 .446 .478 59.60 32.50 27.60 14.73 15.55 2.346 1.280 1.087 .580 .612 65.60 35.30 30.80 16.00 16.80 2.583 1.390 1.213 .630 .661 78.00 38.85 34.10 16.89 17.71 3.071 1.530 1.343 .665 .697 79.50 42.05 37.30 17.78 18.60 3.130 1.656 1.469 .700 .732 90.00 45.10 40.50 20.34 21.16 3.543 1.776 1.594 .801 .833 Plug with straight sealing gland and cable clamp backshell solder 06 JC shell size MS 3116 J 08 10 12 L oA 14 oD oG 16 18 20 22 24 L Max solder A Max D Max G 57.68 19.05 19.90 5.02 2.271 .750 .783 .198 .230 57.68 21.80 21.50 5.94 6.76 min Max 5.84 2.271 .858 .846 .234 .266 61.24 26.15 25.00 9.34 10.16 2.411 1.030 .984 .368 .400 66.01 29.35 27.80 11.32 12.14 2.599 1.156 1.094 .446 .478 74.75 32.50 29.40 14.73 15.50 2.943 1.280 1.157 .580 .610 80.57 35.30 35.30 16.00 16.82 3.172 1.390 1.390 .630 .662 91.69 38.85 35.30 16.89 17.71 3.610 1.530 1.390 .665 .697 95.66 42.05 41.10 17.78 18.60 3.766 1.656 1.618 .700 .732 101.22 45.10 42.40 20.34 21.16 3.985 1.776 1.669 .801 .833 Plug with elbow cable clamp backshell shell size HE 301 B 08 EC 08 HE 301 B 08 RC 10 oA L 12 14 16 18 R solder 08 EC crimp 08 RC 20 oG D 22 24 186 L Max solder/crimp A Max D Max G R Max 50.10 19.05 19.70 3.50 16.00 1.972 .750 .776 .138 .630 52.60 21.80 21.20 5.00 18.00 2.071 .858 .835 .197 .709 54.90 26.15 24.20 8.20 19.50 2.161 1.030 .953 .323 .768 58.50 29.35 27.50 10.00 22.00 2.303 1.156 1.083 .394 .866 60.80 32.50 29.10 13.00 23.50 2.394 1.280 1.146 .512 .925 65.00 35.30 35.70 16.00 25.00 2.559 1.390 1.406 .630 .984 69.10 38.85 35.70 16.00 26.50 2.720 1.530 1.406 .630 1.043 71.00 42.05 39.70 19.30 28.00 2.795 1.656 1.563 .760 1.102 75.50 45.10 43.50 20.60 31.00 2.972 1.776 1.713 .811 1.220 26482 Series I Solder Connectors Plug with elbow backshell for potting solder 08 P crimp 08 RP shell size HE 301 B 08 P 08 HE 301 B 08 RP 10 12 L OA 14 16 R 18 20 S G 22 24 L Max solder/crimp A Max 40.70 19.05 1.602 .750 44.90 21.80 G Max R Max S Max 8.10 11.70 11.30 .319 .461 .445 11.30 14.35 14.50 1.768 .858 .445 .565 .571 46.90 26.15 13.30 15.90 17.70 1.846 1.030 .524 .626 .697 49.20 29.35 16.10 16.30 20.10 1.937 1.156 .634 .642 .791 50.60 32.50 16.90 19.30 22.80 1.992 1.280 .665 .760 .898 51.80 35.30 18.10 20.60 25.60 2.039 1.390 .713 .811 1.008 53.70 38.85 19.70 21.90 28.80 2.114 1.530 .776 .862 1.134 54.80 42.05 20.80 23.50 31.60 2.157 1.656 .819 .925 1.244 58.20 45.10 24.20 30.15 35.20 2.291 1.776 .953 1.187 1.386 G Max K threading UNEF 2 A Screened plug with straight adapter solder 36 A crimp 36 RA shell size 08 VG 95328 N 10 12 L 14 OA 18 OD K OG 16 20 22 24 L Max solder/crimp A Max D Max 41.00 19.05 14.50 9.10 1.614 .750 .571 .358 41.00 21.80 18.70 12.08 1.614 .858 .736 .476 41.00 26.15 21.70 15.25 1.614 1.030 .854 .600 41.00 29.35 25.10 18.15 1.614 1.156 .988 .715 41.00 32.50 28.13 21.32 1.614 1.280 1.107 .839 41.00 35.30 31.38 24.32 1.614 1.390 1.235 .957 43.30 38.85 34.30 26.73 1.705 1.530 1.350 1.052 43.30 42.05 37.60 30.67 1.705 1.656 1.480 1.207 43.50 45.10 40.70 33.08 1.713 1.776 1.602 1.302 G Max 1/2 28 5/8 24 3/4 20 7/8 20 1-20 1-3/16 18 1-3/16 18 1-7/16 18 1-7/16 18 Screened plug with removable straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix) solder 36 T crimp 36 RT shell size 08 10 12 OA L 14 OD OG 16 18 20 M 22 24 187 L Max solder/crimp A Max D Max M Max 51.60 19.05 18.25 7.45 2.031 .750 .719 .293 .146 51.60 21.80 20.25 9.00 3.70 3.70 2.031 .858 .797 .354 .146 51.60 26.15 24.75 13.30 3.70 2.031 1.030 .974 .524 .146 51.60 29.35 27.75 16.50 3.70 2.031 1.156 1.093 .650 .146 51.60 32.50 30.05 18.50 3.70 2.031 1.280 1.183 .728 .146 52.00 35.30 34.15 21.90 3.70 2.047 1.390 1.344 .862 .146 53.90 38.85 37.25 25.10 3.70 2.122 1.530 1.467 .988 .146 53.90 42.05 40.45 28.20 3.70 2.122 1.656 1.593 1.110 .146 53.90 45.10 43.65 31.40 3.70 2.122 1.776 1.719 1.236 .146 26482 Series I Solder Connectors Screened plug with removable straight backshell for screen termination and heatshrink sleeving solder 36 G crimp 36 RG L Max solder/crimp A Max D Max 54.00 19.05 16.30 7.45 2.126 .750 .642 .293 .142 54.00 21.80 18.30 10.30 3.60 shell size 08 VG 95328 M 10 12 L OA 14 OG OD 16 18 20 M 22 G Max M Max 3.60 2.126 .858 .720 .406 .142 54.00 26.15 22.30 13.20 3.60 2.126 1.030 .878 .520 .142 54.00 29.35 25.30 16.50 3.60 2.126 1.156 .996 .650 .142 54.00 32.50 28.30 19.35 3.60 2.126 1.280 1.114 .762 .142 54.00 35.30 32.30 21.60 3.60 2.126 1.390 1.272 .850 .142 58.00 38.85 34.30 24.80 3.60 2.283 1.530 1.350 .976 .142 58.00 42.05 38.30 27.90 3.60 2.283 1.656 1.508 1.098 .142 58.00 45.10 41.30 31.00 3.60 2.283 1.776 1.626 1.220 .142 solder/crimp A Max B Max C Max D threading PE 08 - - - - - 10 - - - - 11 24 Plug with straight adapter for electrical pitch access L Max shell size solder 06 Z crimp 06 RZ 12 14 L 43.00 26.15 9.00 24.80 1.693 1.030 .354 .976 45.00 29.35 11.00 28.80 1.772 1.156 .433 1.134 45.00 32.50 11.00 30.80 1.772 1.280 .433 1.213 46.00 35.30 12.00 40.80 1.811 1.390 .472 1.606 46.50 38.85 12.00 40.80 1.831 1.530 .472 1.606 46.50 42.05 12.00 40.80 1.831 1.656 .472 1.606 65.50 45.10 31.40 45.00 2.579 1.776 1.236 1.772 OA B 16 D OC 18 20 22 24 16 16 21 21 21 29 Screened plug with lock finger and short backshell for screen termination and heatshrink sleeving solder 76 U crimp 76 RU shell size L Max 08 - solder crimp A Max D Max H Max G Max E Max M Max - - - - - - VG 95328 U 10 L 2.8/0.098 min 12 OA OE 14 OD OG 16 M H 188 - - - - - - - 35.60 25.00 22.50 32.00 13.20 19.50 3.70 1.402 .984 .886 1.260 .520 .768 .146 35.60 29.00 25.50 32.00 16.10 21.00 3.70 1.402 1.142 1.004 1.260 .634 .827 .146 35.60 32.00 28.50 32.00 19.25 22.50 3.70 .886 .146 1.402 1.260 1.122 1.260 .758 18 - - - - - - - 20 - - - - - - - 22 - - - - - - - 24 - - - - - - - 26482 Series I Solder Connectors Hermetic connectors shell size square flange receptacle 02 H HE 301 B 02 H 08 10 20 E OG 4 Holes OJ E N 18 M 16 C OA 14 F C H 12 OD 22 24 shell size jam nut receptacle HE 301 B 07 H 07 H MS 3114 H VG 95328 F 08 10 12 C L 14 C P OA 16 18 20 G Oext du filetage M OD 22 shell size solder fixing receptacle HE 301 B 1 H IH MS 3113 H VG 95328 G 08 10 12 H 14 OD 16 18 OG OA 20 F E G 12.03 21.42 27.09 15.09 13.84 14.27 H Max M Max J N Max 6.97 3.13 11.24 .562 .274 .123 .443 .066 15.01 24.62 31.87 18.26 13.84 17.06 6.97 3.13 11.24 1.67 .474 .843 1.067 .591 .969 1.255 .594 .672 .274 .123 .443 .066 6.97 3.13 11.24 1.67 .781 .274 .123 .443 .066 22.25 29.36 38.22 23.00 13.84 23.00 6.97 3.13 11.24 1.67 .876 1.156 1.505 .812 .545 1.67 19.07 26.98 35.04 20.62 13.84 19.85 .751 1.062 1.380 .719 .545 .906 .274 .123 .443 .066 25.42 31.73 41.39 24.61 13.84 26.18 6.97 3.13 11.24 1.67 1.001 1.249 1.630 .906 .545 .969 .545 .545 1.031 .274 .123 .443 .066 28.60 34.12 44.57 26.97 13.84 29.36 6.97 3.13 11.24 1.67 .545 1.156 .274 .123 .443 .066 31.77 37.20 47.74 29.36 15.42 31.74 1.126 1.343 1.755 1.062 6.99 3.13 12.00 2.48 .607 1.250 .275 .123 .472 .098 34.95 40.47 50.92 31.75 16.23 34.92 1.251 1.465 1.880 1.156 6.99 3.13 12.00 2.48 .639 1.375 .275 .123 .472 .098 38.12 43.66 55.69 34.92 17.04 38.10 1.376 1.593 2.005 1.250 6.19 3.81 12.81 2.48 1.501 1.719 2.193 1.375 .244 .150 .098 .671 1.500 .504 A C Max D Max G L Max M Max P 12.03 24.07 27.37 14.26 20.53 17.93 13.33 .474 .948 1.078 .561 .808 .706 .525 15.01 27.22 30.57 17.43 20.53 17.93 16.51 .591 1.072 1.204 .686 .808 .706 .650 19.07 32.00 35.32 22.19 20.53 17.93 20.63 .751 1.260 1.391 .874 .808 .706 .812 22.25 35.17 38.50 25.36 20.53 17.93 23.78 .876 1.385 1.516 .998 .808 .706 .936 25.42 38.35 41.67 28.54 20.53 17.93 26.93 1.001 1.510 1.641 1.124 .808 .706 1.060 28.60 41.52 44.85 31.71 20.53 17.93 30.10 1.126 1.635 1.766 1.248 .808 .706 1.185 31.77 46.27 49.62 34.89 26.10 22.70 33.28 1.251 1.822 1.954 1.374 1.028 .894 1.310 34.95 49.47 52.77 38.06 26.10 22.70 36.45 N 1.376 1.948 2.078 1.498 1.028 .894 1.435 38.12 52.62 55.97 41.24 26.93 23.54 39.63 1.501 2.072 2.204 1.624 1.060 .927 1.560 A D Max H Max F G Max M Max 12.03 16.40 8.19 13.84 14.27 10.69 .474 .646 .322 .545 .562 .421 .030 15.01 19.40 8.19 13.84 17.06 10.69 0.76 N Max 0.76 .591 .764 .322 .545 .672 .421 .030 19.07 21.80 8.19 13.84 19.83 10.69 0.76 .751 .858 .322 .545 .781 .421 .030 22.25 25.00 8.19 13.84 23.00 10.69 0.76 .876 .984 .322 .545 .906 .421 .030 25.42 28.10 8.19 13.84 26.18 10.69 0.76 1.001 1.106 .322 .545 1.031 .421 .030 28.60 31.30 8.19 13.84 29.36 10.69 0.76 1.126 1.232 .322 .545 1.156 .421 .030 31.77 33.70 8.16 15.42 31.74 12.32 0.76 1.251 1.327 .321 .607 1.250 .485 .030 34.95 36.90 8.16 16.23 34.92 12.32 0.76 M D Max 24 F C Max A 22 24 189 1.376 1.453 .321 .639 1.375 .485 .030 38.12 40.10 7.36 17.04 38.10 13.12 0.76 1.501 1.579 .290 .671 1.500 .517 .030 26482 Series I Solder Connectors Wire wrap and straight spills connectors Square flange receptacle type 02 E shell size wire wrap version 08 E L A 12.03 11.70 .474 4 Holes OJ 10 F OD OA 12 14 16 straight spills version E L 18 4 Holes OJ 20 7 mini B F OD OA T 22 C 24 .461 22.25 11.70 .876 C .461 19.07 11.70 .751 B .461 15.01 11.70 .591 H B Max .461 C Max OD Max E F Max H J L Max T 1.32 10.84 15.09 20.99 12.42 3.13 20.50 9.46 .052 .123 .807 .372 1.32 13.99 18.26 24.19 12.42 3.13 20.50 9.46 .052 .123 .427 .551 .594 .826 .807 .372 1.32 17.37 20.62 26.54 12.42 3.13 20.50 9.46 .052 .123 .807 .372 1.32 20.57 23.00 28.89 12.42 3.13 20.50 9.46 .052 .123 .684 .810 .719 .952 .489 .812 1.045 .906 1.137 .489 .489 .489 .807 .372 25.42 11.70 1.32 23.62 24.61 31.29 12.42 3.13 20.50 9.46 1.001 .052 .123 .807 .372 9.46 .461 .930 .969 1.232 .489 28.60 11.70 1.32 26.69 26.97 33.69 12.42 3.13 20.50 1.126 .052 1.051 1.062 1.326 .123 .461 .489 .807 .372 31.77 14.35 2.15 29.89 29.36 36.89 10.69 3.13 23.80 7.76 1.251 .085 1.177 1.156 1.452 .123 .937 .306 7.76 .565 .421 34.95 14.35 2.15 33.04 31.75 39.99 10.69 3.13 23.80 1.376 .085 1.301 1.250 1.574 .123 .565 .421 .937 .306 38.12 15.20 2.15 36.24 34.92 43.15 10.69 3.81 23.80 7.76 1.501 .085 1.427 1.375 1.699 .150 .306 .598 .421 .937 Jam nut receptacle type 07 A shell size wire wrap version 08 P L 10 S OA H 12 14 C B OF 16 straight spills version A B Max C Max F Max H L Max P Max S Max T 12.03 17.90 2.64 26.94 12.42 20.64 19.29 23.94 9.46 .474 .705 .104 1.061 .489 .813 .759 .943 .372 15.01 17.90 2.64 30.14 12.42 20.64 22.38 26.95 9.46 .591 .705 .104 1.187 .489 .813 .881 1.061 .372 19.07 17.90 2.64 34.94 12.42 20.64 27.13 31.74 9.46 .751 .705 .104 1.376 .489 .813 1.068 1.250 .372 22.25 17.90 2.64 38.04 12.42 20.64 30.33 34.94 9.46 .876 .705 .104 1.498 .489 .813 1.194 1.376 .372 25.42 17.90 2.64 41.26 12.42 20.64 33.48 38.24 9.46 1.001 .705 .104 1.624 .489 .813 1.318 1.506 .372 28.60 17.90 2.64 44.44 12.42 20.64 36.68 41.34 9.46 1.126 .705 .104 1.750 .489 .813 1.444 1.628 .372 31.77 22.45 3.44 49.14 8.64 25.99 39.83 46.04 8.49 1.251 .884 .135 1.935 .340 1.023 1.568 1.813 .334 34.95 22.45 3.44 52.24 8.64 25.99 43.03 49.24 8.49 1.376 .884 .135 2.057 .340 1.023 1.694 1.939 .334 38.12 23.30 3.44 55.54 7.79 26.84 46.18 52.74 7.79 1.501 .917 .135 2.187 .307 1.057 1.818 2.076 .307 P L 18 T S OA 20 7 mini B C 22 OF 24 190 26482 Series I Solder Connectors Protective Caps Part numbers 8500 basic series shell size 8 02 10 part numbers for receptacle part numbers for plug specification 10 03 11 12 04 12 14 05 13 16 27 28 18 06 14 20 07 15 22 08 16 05 *** 24 09 17 for cap type and plating Type and plating receptacle cap Cap type olive green black cadmium anodized plug cap nickel olive green white black cadmium cadmium anodized nickel cap with chain and ring D 29 D 44 D D 02 D 29 D 44 D cap with nylon cord and ring B 29 B 44 B B 02 B 29 B 44 B cap with nylon cord and washer (shell 10, 12 and 14) - - - E - - - cap with nylon cord and washer H - - - - - - cap with chain and washer J - - - - - - Caps for plug B shell size O3.5/ .138 OA 08 10 C 12 D 14 16 B O3.5/ .138 OA 18 20 22 D 24 B OA B OF E E 191 OA Maxi B Maxi C D E OF 16.80 19.84 132.00 128.00 .661 .781 5.197 5.039 - - 19.80 19.84 132.00 .780 .781 5.197 128.00 132.00 14.00 5.039 5.197 23.90 19.84 148.00 .551 148.00 148.00 17.60 .941 .781 5.827 5.827 5.827 .693 27.00 19.84 148.00 148.00 148.00 20.80 5.827 .819 1.063 .781 5.827 5.827 30.20 19.84 148.00 148.00 1.189 .781 5.827 5.827 33.40 19.84 148.00 148.00 1.315 .781 5.827 5.827 36.50 21.44 168.00 153.00 1.437 .844 6.614 6.024 39.80 21.44 168.00 153.00 1.567 .844 6.614 6.024 42.90 22.22 168.00 153.00 1.689 .875 6.614 6.024 - - - - - - - - - - 26482 Series I Solder Connectors Caps for receptacle shell size B 08 OA O3.5/.138 10 C 12 D 14 16 B 18 OA O3.5/.138 20 D 22 24 B OA Max B Max C D J Max H K 19.00 21.44 84.00 77.00 14.80 80.00 84.00 .748 .844 3.307 3.031 .583 3.150 3.307 21.80 21.44 84.00 77.00 17.90 80.00 84.00 .858 .844 3.307 3.031 .705 3.150 3.307 26.10 21.44 100.00 89.00 22.70 90.00 100.00 1.028 .844 3.937 3.504 .894 3.543 3.937 29.30 21.44 100.00 89.00 25.90 90.00 100.00 1.154 .844 3.937 3.504 1.020 3.543 3.937 32.50 21.44 100.00 89.00 29.00 90.00 100.00 1.280 .844 3.937 3.504 1.142 3.543 3.937 35.30 21.44 100.00 89.00 32.20 90.00 100.00 1.390 .844 3.937 3.504 1.268 3.543 3.937 38.80 21.44 116.00 102.00 35.40 110.00 116.00 1.528 .844 4.567 4.016 1.394 4.331 4.567 42.00 21.44 116.00 102.00 38.60 110.00 116.00 1.654 .844 4.567 4.016 1.520 4.331 4.567 45.10 22.22 116.00 102.00 41.70 110.00 116.00 1.776 .875 4.567 4.016 1.642 4.331 4.567 B B OJ OA OA OJ H K J H Tools Crimping pliers contact sizes wire size mm2 AWG part numbers crimping tool 20 0,93 0,60 0,38 0,21 18 20 22 24 } 16 1,91 1,34 0,93 14 16 18 } locator 8465 (MS 3191-1) MS 3191-20 A 8476-01 (M 22520 / 2-01) 8365 (M 22520 / 1-01) 8476-02 (M 22520 / 2-02) 8365-02 (M 22520 / 1-02) 8465 (MS 3191-1) MS 3191-16 A 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02) Insertion and extraction tools contact type crimp part numbers contact size insertion tools 20 16 20 for wire cap 16 Spare tube for tool : - 8500-36 A - 8500-38 A extraction tools 8500-29 B * 8500-39 8500-31 8500-39 or 8500-37 8500-36 A 8500-38 A 8500-31 8500-37 PN : 8500-1163 PN : 8500-1184 * Except 8-2, 8-3, 8-4, 12-14 contact layouts : insertion tool 8500-93B Filler plug contact size part numbers colour 20 8500-4144 grey 16 8500-479 blue 20 8500-4144 A (MS 3187 A 20) red 16 8500-4267 (MS 3187-16) blue 192 profile 26482 Series I Solder Connectors Panel cut-out shell size square flange receptacle jam nut receptacle 08 10 OB P E OA OA 12 14 E X N 16 solder fixing receptacle 18 20 OC 22 24 Accessories A C OA X min 2.90 15.10 3.15 1.57 3.17 13.75 .594 .124 .062 .125 .541 .114 18.80 17.75 17.50 18.26 3.15 1.57 3.17 16.95 2.90 .740 .699 .689 .719 .124 .062 .125 .667 .114 22.15 22.50 20.20 20.62 3.15 1.57 3.17 21.50 2.90 .872 .886 .795 .812 .124 .062 .125 .846 .114 25.30 25.70 23.40 23.00 3.15 1.57 3.17 24.20 2.90 .996 1.012 .921 .906 .124 .062 .125 .953 .114 28.45 28.85 26.60 24.60 3.15 1.57 3.17 27.35 2.90 1.120 1.136 1.047 .969 .124 .062 .125 1.077 .114 31.65 32.05 29.80 26.97 3.15 1.57 3.17 30.55 2.90 1.246 1.262 1.173 1.062 .124 .062 .125 1.203 .114 34.80 35.20 32.10 29.36 3.15 1.57 6.35 33.70 5.50 1.370 1.386 1.264 1.156 .124 .062 .250 1.327 .217 38.00 38.40 35.30 31.75 3.15 1.57 6.35 36.90 5.50 1.496 1.512 1.390 1.250 .124 .062 .250 1.453 .217 41.20 41.55 38.40 34.92 3.73 1.57 6.35 40.05 5.50 1.622 1.636 1.512 1.375 .147 .062 .250 1.577 .217 A C Max M Max N Max 12.03 20.99 15.09 3.13 11.70 1.32 15.01 24.19 18.26 3.13 11.70 1.32 19.07 26.54 20.62 3.13 11.70 1.32 22.25 28.89 23.00 3.13 11.70 1.32 25.42 31.29 24.61 3.13 11.70 1.32 28.60 33.69 26.97 3.13 11.70 1.32 31.77 36.89 29.36 3.13 14.35 2.15 34.95 39.99 31.75 3.13 14.35 2.15 38.12 43.15 34.92 3.81 15.20 2.15 .474 .591 .751 .876 16 1.001 18 1.126 20 1.251 22 1.376 24 Shell P .579 14 Gaskets Max 14.70 12 Plastic protective caps for receptacle and plug N min .575 10 N J 14.60 08 E E .612 Shell size 4 Holes OJ C 15.55 Dummy receptacle M B 1.501 .826 .952 1.045 1.137 1.232 1.326 1.452 1.574 1.699 E J .594 .123 .719 .461 .123 .812 .461 .123 .906 .461 .123 .969 .461 .123 1.062 .461 .123 1.156 .461 .123 1.250 .565 .123 1.375 .565 .150 .598 Shell size caps for receptacle caps for plug 08 10 12 14 16 18 20 22 24 8500-5585A 8500-5586A 8500-5587A 8500-5588A 8500-5589A 8500-5590A 8500-5591A 8500-5592A 8500-5593A 8500-5594 8500-5595 8500-5596 8500-5597 8500-5598 8500-5599 8500-5600 8500-5601 8500-5602 gaskets for square flange receptacle .052 .052 .052 .052 .052 .052 .085 .085 .085 gaskets for jam nut receptacle size neoprene fairprene neoprene vitton (for hermetic receptacle) 8 10 12 14 16 18 20 22 24 8500-275 8500-276 8500-277 8500-278 8500-283 8500-279 8500-280 8500-281 8500-282 8500-4164 8500-4165 8500-4166 8500-4167 8500-4168 8500-4169 8500-4170 8500-4171 8500-4172 3330102 3330103 3330104 3330105 3330106 3330107 3330108 3330109 3330110 3330675 3330670 3330671 3330672 3331048 3331049 3331050 3331051 3331052 Re-usable fixing plate Two, three or four-holes self-locking fixing-plates are available at SHTP. See page 126. 193 26482 Series I Solder Connectors Male - female square flange through bulkhead receptacle A B shell size C 08 OF 10 12 14 16 D 4 holes OG OH 18 20 E 21 22 24 A B C D E F G H 33.20 1.60 14.30 15.10 20.60 12.00 3.20 27.30 1.307 .063 .563 .594 .811 .472 .126 1.075 33.20 1.60 14.30 18.30 23.80 15.00 3.20 31.80 1.307 .063 .563 .720 .937 .591 .126 1.252 33.20 1.60 14.30 20.60 26.20 19.05 3.20 35.10 1.307 .063 .563 .811 1.031 .750 .126 1.382 33.20 1.60 14.30 23.00 28.60 22.23 3.20 38.50 1.307 .063 .563 .906 1.126 .875 .126 1.516 33.20 1.60 14.30 24.60 30.90 25.40 3.20 41.30 1.307 .063 .563 .969 1.217 1.000 .126 1.626 33.20 1.60 14.30 27.00 33.30 28.60 3.20 44.70 1.307 .063 .563 1.063 1.311 1.126 .126 1.760 36.40 2.40 17.50 29.40 36.50 31.75 3.20 49.10 1.433 .094 .689 1.157 1.437 1.250 .126 1.933 36.40 2.40 17.50 30.60 38.50 33.85 3.20 51.20 1.433 .094 .689 1.205 1.516 1.333 .126 2.016 36.40 2.40 17.50 31.80 39.70 34.90 3.20 53.10 1.433 .094 .689 1.252 1.563 1.374 .126 2.091 36.40 2.40 17.50 34.90 42.90 38.10 4.20 57.30 1.433 .094 .689 1.374 1.689 1.500 .165 2.256 Part numbers EC 52 B basic series shell size ** ** PS * 851 range contact layout please consult us contact type P - male S - female polarization N, W, X, Y, Z Jam nut receptacle with front release straight spills A C shell size OJ D 08 10 12 B 14 OH E 16 20 G O F 18 22 24 A B 17.25 2.30 C D E Max E min 13.68 5.00 5.00 .091 .539 .197 .197 17.25 2.30 .679 13.68 5.00 5.00 .091 .539 .197 .197 17.25 2.30 .679 13.68 5.00 5.00 .091 .539 .197 .197 17.25 2.30 .679 13.68 5.00 5.00 .091 .539 .197 .197 17.25 2.30 .679 13.68 5.00 5.00 .091 .539 .197 .197 17.25 2.30 .679 13.68 5.00 5.00 .091 .539 .197 .197 18.85 2.50 .679 13.79 5.00 6.60 .098 .543 .197 .260 18.55 2.50 .742 13.79 5.00 6.60 .098 .543 .197 .260 18.85 2.50 13.79 5.00 5.90 .543 .197 .232 .742 .742 .098 F G H 1.57 14.60 23.15 23.15 .062 .575 .911 .911 1.57 17.70 16.80 26.45 .062 .697 .661 1.041 1.57 22.70 20.90 31.20 .062 .894 .823 1.228 1.57 25.70 24.10 34.40 .062 1.012 .949 1.354 1.57 28.80 27.20 37.55 .062 1.134 1.071 1.478 1.57 32.00 30.40 40.75 .026 1.260 1.197 1.604 1.57 35.20 33.60 45.50 .062 1.386 1.323 1.791 1.57 38.40 36.80 48.70 .062 1.512 1.449 1.917 1.57 41.50 39.90 51.85 .062 1.634 1.571 2.041 J .60 .024 .60 .024 .60 .024 .60 .024 .60 .024 .60 0.24 .60 .024 .60 .024 .60 .024 Part numbers 851 basic series shell type shell size contact layout contact type 07A 07A - jam nut receptacle without backshell 851 range consult SHTP P - male polarization manufactures specifications 194 ** ** P * SN0378 26482 Series I Solder Connectors Push-pull locking plug General characteristics * * * * * Locking : by pushing on the coupling nut Unlocking : by pulling a lanyard Mounted : on all 851 receptacles Layouts and crimp solder contats : (see pages 7 and 11) Other characteristics : (see page 6) Ordering information - Environmental connectors 856 - 06 R 856 - 06 E crimp version solder version basic series ** - ** ** - ** shell type 06 08 - plug for use with straight backshell plug for use with 90 backshell backshell type R/E-backnut RC/EC - straitght cable clamp straitght adaptor RA/A RP/P straitght backshell for potting RM/M straitght removable backshell for heatshrink sleeving RT/T specification 38 or 42 straight removable backshell for screen termination and heatshrink sleeving RC/EC -90 cable clamp RP/P 90 backshell for potting shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 contact layout see table p ? contact type P = male - S = female orientation normal (not included in part number) w, x, y, z, see table p ? obligatory suffix specification 07 08 09 olive-green cadmium plate (solder version) olive-green cadmium plate (crimp version) white cadmium plate (crimp and solder version) 195 P P * * 50 50 -* -* 26482 Series I Solder Connectors Dimensions Shell size 8 10 12 14 16 18 20 22 24 A 19,50 22,80 27,30 30,80 34,000 37,00 41,00 44,50 49,20 B 24,95 28,75 32,55 36,05 39,05 42,05 45,80 49,20 53,45 06 R E 32,00 32,00 32,00 32,00 32,00 32,00 31,80 31,80 31,80 06 RC E 47,30 47,30 47,30 47,30 50,50 50,50 49,90 49,90 49,90 06 RP E 42,10 42,10 42,10 42,10 42,10 45,40 49,80 49,80 49,80 06 RA E 41,00 41,00 41,00 41,00 41,00 41,00 43,00 43,00 43,20 06 RM E 50,00 50,00 50,00 50,00 50,00 50,00 51,70 51,70 51,70 06 RT specifications 38 or 42 E 50,00 50,00 50,00 50,00 50,000 50,00 51,70 51,70 51,70 E 50,10 52,60 54,90 58,50 60,80 65,00 68,80 71,20 76,20 D max 16,00 18,00 19,50 22,00 23,50 25,00 26,50 28,00 31,00 E 40,70 44,90 47,00 49,20 50,60 51,80 53,10 54,50 57,90 D max 11,00 14,35 15,90 16,30 19,30 20,60 21,90 23,50 30,15 08 RC 08 RP Note : for backshells dimensions refer to values given in preceding pages 196 26482 Series I Solder Connectors 8F51 filter connector Overview These connectors are derived from standard specifications MIL-C-26482 G series 1 - NFC 93422 (HE 301 B) - VG 95328. They are intermountable and intermateable with standard connectors. Different types of filters may be fitted in these connectors to eliminate RFI/EMI in different frequency ranges. Built-in tubular filter offers following advantages : * rational filtering on interferences at electronic equipment input or output, * case screen-shielding efficiency is maintained, * cost and volume saving as compared with the use of discrete filters wired down the line, * 4 types of filter contacts are available, * a wide choice of combinations of filter, unfiltered and grounded contacts. An adaptor version is also a simple technique to equip existing systems which do not incorporate filters. Electrical characteristics * * * * Max. current rating per contact : 3 A or 7 A depending on contact type Max. operating voltage : 100 or 200 V depending on filter Attenuation for HF filter contact : 35 dB min between 40 and 1000 MHz Attenuation for LF filter contact : 35 dB min between 10 and 1000 MHz For this product, consult our FILTER CONNECTOR department. Cadmium free plating SOURIAU propose a 851 connector with cadmium free black zinc-nickel plating. This plating has been introduced in accordance with European directive 76/769 EEC. Reason : * Reduction in level of heavy metal pollutants produced by cadmium. * Reduction in health associated with the corrosive by products of cadmium. Characteristics : * Mechanical - shell : aluminium alloy - plating : zinc-nickel * Electrical - shell continuity : 2.5 m * Environmental - salt spray : 200 hours Part numbers : * Solder version 851 00 E 8-3A P.54 zinc-nickel plating * Crimp version 851 00 R 8-3A P.54 zinc-nickel plating * See part numbers system - page 8 (solder and crimp version) - page 10 (straight spills ans wire-wrap versions) This plating is available for shell type - 00 : square flange receptacle accepting backshells - 02 : square flange receptacle not accepting backshells - 07 : jam nut receptacle accepting backshell - 07A : jam nut receptacle not accepting backshells - 06 : plug for use without straight backshell - 36 : screened plug for use with straight backshells Backshells, please consult us. 197 26482 Series I Solder Connectors * Notes: 198 Push Pull Connectors 199 Push-Pull connectors Introduction This catalogue presents the push-pull connectors ranges for industrial applications. These products are particularly suitable for high reliability and high quality applications where a simple yet fast method to connect/disconnect is required. Also suitable for high endurance and ease of operation in very limited spaces. The aesthetics of the product allows for perfect integration on front panel equipments. SOURIAU offers 3 main series of metallic circular connectors : * JBX series : basic push-pull series for signal transmission * JKX series : environmental version of the JBX series sealed to IP68 * JDX series : environmentally sealed. Breakaway version. Contents Where and why push-pull............................................................................................201 Selection guide .............................................................................................................202 Push Pull Connectors * Main features - Part number system ...........................................................................203 * Shell types and dimensions .................................................................................204-206 * Keying..........................................................................................................................207 * Contact layouts ....................................................................................................208-210 * Options ........................................................................................................................211 * Technical characteristics .............................................................................................212 * Wiring and assembly instructions ........................................................................213-217 JBX Series * Plug Assembly Instructions..................................................................................218-222 * Receptacle Assembly Instructions.......................................................................223-226 Environmentally Sealed Push Pull Connectors * Main features - Part number system ...........................................................................227 * Shell types and dimensions.........................................................................................228 * Keying - contact layouts..............................................................................................229 * Options ........................................................................................................................230 * Technical characteristics .............................................................................................231 * Wiring and assembly instructions ........................................................................232-235 JKX Series * Plug Assembly Instructions..................................................................................236-241 * Receptacle Assembly Instructions.......................................................................242-245 Push Pull Connectors - Sealed Version Size 2 * Main features - Part number system ...........................................................................246 * Shell types and dimensions.........................................................................................247 * Keying - contact layouts..............................................................................................248 * Technical characteristics .............................................................................................249 Sealed Breakaway Connector * Main features - Part numbering system ......................................................................250 * Shell types and dimensions.........................................................................................251 * Contact layout and Keying ..........................................................................................252 * Technical characteristics ......................................................................................253-254 Accessories - Piece parts ....................................................................................255-257 Toolings..................................................................................................................258-259 More about our know-how..........................................................................................260 Requirement form ........................................................................................................261 Conversion table ..........................................................................................................262 All dimensions are in mm 200 Push-Pull connectors Where and Why push-pull ? Medical l Extremely fast and easy to use l A thousand matings/ unmatings. l Enhanced appearance to add value to equipment l Space saving Professional audio-video Instrumentation GPS Telecommunications 201 Selection Guide Push-Pull Unsealed Sealed Multipin Multipin Solder, Crimp or PCB contacts Solder, crimp or PCB contacts Solder, or PCB contacts Keyed Keyed Keyed Keyed 2 to 30 contacts 2 to 10 contacts 2 to 19 contacts 2 to 19 contacts UL approved JBX series Sealed JBX size 2 JKX series Sealed JDX Shell material Brass Brass Brass Brass and Aluminum Insulator material PEEK PEEK PEEK PEEK Shielding Shielded (55 dB up to 100 MHz) Shielded (55 dB up to 100 MHz) Shielded (55 dB up to 100 MHz) Shielded (35 dB up to 1GHz) Endurance > 1000 cycles > 1000 cycles > 1000 cycles > 2500 cycles Current rating up to 30 A up to 15 A up to 30 A up to 30 A Temperature range - 40C ; + 125C (- 58F ; + 257F) - 40C ; + 125C (- 58F ; + 257F) - 40C ; +125C (- 40F ; + 257F) - 40C ; +125C (- 40F ; + 257F) Protection index IP 40 IP 68 when mated IP 67 IP 68 mated and unmated Push-pull locking system The locking of the plug into the receptacle is achieved by a simple axial push on the outer shell. Connection cannot be broken by pulling the cable or any other parts of the plug than the outer shell. 202 To unmate the plug from the receptacle, just pull axially the outer shell. Push Pull Connectors Key features * Mechanically keyed : ensures correct polarisation and alignment. * Contact layouts from 2 to 30 contacts. * Wire gauges range from 30 AWG to 12 AWG. * High contact density in a small space. * Contact termination in either crimp, solder, PCB or right angle PCB contacts. User advantages 6-collet cluster Blister packaging Allows a wide range of cable diameter applications for a single connector. Removable contacts Available crimp versions allow easier wiring and maintenance. Part number system JBX Basic series FD 1 G 05 M Shell type FD-FC-ER-EA-SR-PC-ED-EP-EZ Shell size 00 - 0 - 1 - 2 - 3 Keying G-J-A-B Contact layout 02 ---------- 30 Contact type M : pin Contact termination C : crimp ; S : solder ; P* : straight PCB tails ; Q* : 90 PCB tails Material & surface plating S : Outer shell in brass alloy with chrome over nickel C S D F : socket (in relation with keying) N : Outer shell in brass alloy with black plating (consult Souriau USA) D : Obligatory suffix S : All content dismeters except .05 mm P : 0.5 mm contact only Options M : Connector with backnut for protective boot - Protective boot to order separately page 13 R : Red dot (possible for FD, FC, PC, SR, ER, ED, EZ only) * For receptacles with female contacts only. 203 S M Push Pull Connectors Shell types ER : fixed receptacle, front panel mounting, fixed front flange EA : fixed receptacle, back or front panel mounting, double nuts fixing (appropriate with 90 contacts for PCB) EP : fixed receptacle, back panel mounting, fixed rear panel flange (appropriate with 90 contacts for PCB) FD : straight plug with cable clamping ED : fixed receptacle, protuding shell, fixed front flange SR : fixed receptacle with cable clamping, front panel mounting, fixed front flange FC : 90 elbow plug with cable clamping PC : cable mounted receptacle EZ : straight receptacle for PCB 204 Push Pull Connectors Dimensions ER : Fixed receptacle, front panel mounting EA : Double nut receptacle Size 00 0 1 2 3 Size A 14 19 21 24 28 A B 6 8 10 10 12 B C 0.8 1.2 1.5 1.8 2.0 C OD 8 10 14 18 22 OD FD : Straight plug Size 00 0 1 0 1 2 19 21 6.7 8.3 2.5 12 EP : Fixed receptacle, back panel mounting 3 Size 24 28 8 9.5 3.2 3.8 16 20 0 1 A 19 21 24 B 4.5 6 6.5 4.5 C 2.5 3.2 3.8 24 OD 12 16 20 ED : Protruding receptacle 2 3 2 SR : Cable clamp receptacle Size 0 1 2 Size 0 1 2 3 A 19 21 24 A 38 43 50 59 12 A 31 39 45 52 62 B 3 4.5 6.3 B 8 10 10 B 23 29 34 40 47 C 1.2 1.5 1.8 C 1.2 1.5 1.8 2 OC 7 10 12 15 18 OD 10 14 18 OD 10 14 18 22 FC : 90 elbow plug PC : Cable mounted receptacle EZ : Receptacle for PCB Size 0 1 2 3 Size 0 1 A 30.5 36.5 42.5 50.5 B 20.5 25.5 30.5 35.5 Size 0 1 2 3 10 19 4 12 21 4 C 29.5 33.5 36.5 45 A 38 43 50 59 OA B C D OD 10 12 15 18 OB 10 13 16 19.5 OE 7.62 1.1 7.62 1.1 205 Push Pull Connectors Dimensions * Special custom shells FN : Straight plug, shell size 0 with a lanyard FM : 90 elbow plug, shell size 0 with a lanyard FF : Straight plug, with no latching shell size 1 Range of cable diameters With the plastic collet set supplied with the standard product, a wide range of cable diameters is allowed. Find below the maximum and the minimum for each size of shell (for information only because it can change with the cable characteristics). Size 00 0 1 2 3 O A min 1.1 1.5 2.0 3.5 4.9 O A Max 3.5 5.5 7.5 9.7 12.0 206 Push Pull Connectors Keying * Keying angles JBX Series are mechanically keyed to ensure correct alignment of the inserts before the contacts mate. G : normal inserts ; 0 keying angle, plugs with pin contacts, receptacles with socket contacts J : reversed gender inserts ; twin narrow keys, plugs with socket contacts, receptacles with pin contacts. Key J G 0 Keying angle B A sizes 0 - 1 sizes 2 - 3 45 37.5 sizes 0 - 1 30 60 Plug Receptacle * Keyed shells availability Shell size Key ER 00 G l G J A B l l l l l l l l l l l l l l l l l G J A l l l l l l l l l l 1 l l l l l G J A l l l l l l l l l 2 l l l l l 3 G l l l l l l 0 EA ED EP EZ SR PC FD FC l l Available for JBX Series, Customs can be ordered, contact Product Management. 207 Push Pull Connectors Contact layouts * Multi contact inserts Shell size 00 Male insulator Contact viewed from layout wiring side Contact types available S solder C crimp P* straight Q* 90 PCB tails PCB tails AWG Solder Crimp wire wire Max. Max. Max. current rating (A) 0.5 30 - O Contact (Vrms) Working voltage (Vdc / Vrms) 2 1000 500/350 Testing voltage 04 S 02 S C P Q 0.9 24 20 10 1400 660/460 03 S C P Q 0.9 24 20 8 1300 600/420 04 S C P Q 0.7 26 22 7 1400 660/460 05 S C P Q 0.7 26 22 6.5 800 400/260 06 S P 0.5 28 - 2.5 680 320/220 07 S P 0.5 28 - 2.5 680 320/220 02 S C 1.3 20 18 15 1600 760/530 03 S C 1.3 20 18 12 1300 600/420 04 S C P Q 0.9 24 20 10 1900 900/630 05 S C P Q 0.9 24 20 9 1400 660/460 06 S C P Q 0.7 26 22 7 1400 660/460 07 S C P Q 0.7 26 22 7 1400 660/460 08 S C P Q 0.7 26 22 5 1200 600/420 10 S 0.5 28 - 2.5 600 300/200 0 1 Inserts with fixed non removable contacts * For receptacles with female contacts only. Note : Contacts are numbered counter clock wise in the plug and clock wise in the receptacle. 208 Push Pull Connectors Contact layouts * Multi contact inserts Shell size Male insulator Contact viewed from layout wiring side Contact types available S solder C crimp P* straight Q* 90 PCB tails PCB tails O Contact AWG Solder Crimp wire wire Max. Max. Max. current rating (A) (Vrms) Working voltage (Vdc / Vrms) Testing voltage 02 S C 2 16 12 30 2100 1000/700 03 S C 1.6 18 14 17 1700 830/560 04 S C 1.3 20 18 15 2400 1000/800 05 S C 1.3 20 18 14 1900 900/630 06 S C 1.3 20 18 12 1900 900/630 07 S C 1.3 20 18 11 1500 730/500 08 S C P Q 0.9 24 20 10 1700 830/560 10 S C P Q 0.9 24 20 8 1700 830/560 12 S C P Q 0.7 26 22 7 1700 830/560 16 S C P Q 0.7 26 22 6 1500 730/500 18 S C P 0.7 26 22 5.5 1400 660/460 19 S C P 0.7 26 22 5 1400 660/460 03 S C 2 16 12 25 3600 1600/1200 04 S C 2 16 12 25 2500 1100/830 2 3 Inserts with fixed non removable contacts * For receptacles with female contacts. Note : Contacts are numbered counter clock wise in the plug and clock wise in the receptacle. 209 Push Pull Connectors Contact layouts * Multi contact inserts Shell size Male insulator Contact viewed from layout wiring side side Contact types available S solder C crimp P* straight PCB tails Q* 90 PCB tails O Contact AWG Solder Crimp wire wire Max. Max. Max. current rating (A) (Vrms) Working voltage (Vdc / Vrms) Testing voltage 07 S C 1.6 16 12 15 2200 1000/730 10 S C 1.3 20 18 12 1400 660/460 14 S C P 0.9 24 20 9 1700 830/560 18 S C P 0.9 24 20 7 1400 660/460 22 S C P 0.7 26 22 5.5 1200 560/400 30 S C P 26 26 3.5 800 400/260 3 0.7 Inserts with fixed non removable contacts * For receptacles with female contacts. Note : Contacts are numbered counter clock wise in the plug and clock wise in the receptacle. * Voltage Test Procedure - The testing voltage corresponds to the maximum voltage the connector is able to withstand in normal climatic conditions. The value is about 75% of the electrical breakdown voltage. The testing voltage level can be reached several times in connectors life, but never applied for a continuous duration. - The working voltage corresponds to the maximum voltage the connector is able to withstand continuously during its life time, in real environmental conditions, even with high temperature. The value is around 1/3 of the testing voltage. * Maximum current rating - This indicated maximum current rating corresponds to the maximum current that can be applied simultaneously on each line of the connector mated pair, continuously during its life time, in normal climatic conditions. Remark : If the current is applied on only one contact of the layout, then an increased current value can be achieved over a long duration. 210 Push Pull Connectors Options * Protective boot Part number Dimensions Shell size OA O Cable L min Max. JBX 00 MPN 00 1.5 15 1 3.5 JBX 0 MP* 0 2.2 20 1.5 5.5 JBX 1 MP* 1 2.6 25 2 7.5 JBX 2 MP* 2 4 30 3.5 9.7 JBX 3 MP* 3 5 35 4.9 12 * Color code / In size 00, available only in black Material : Colors Color code A blue B white G grey J yellow M brown N black R red V green O orange ELASTOLLAN (PUR) Working temperature : - 40C ; + 80C - 40F ; + 176F Parts that require a protective boot need to be ordered with an M suffix, see page 5. Protective boots are ordered separately. With each JBX connector, one protective boot can accept diverse cable diameters thus the end-user can manage various cable diameters without bothering with multiple part numbers. * Caps : an efficient protection against dust Part number O JBX BR0 12 JBX BR1 14 JBX BR2 18 JBX BR3 20 211 Push Pull Connectors Technical characteristics * Material and treatment UL approved - homologation file E118235 Standard Component Surface treatment (m) Material ISO ASTM Cr Ni Au Outer shell and collet nut Brass CuZn40Pb3 C38500/C360 0.1 - 0.6 5-8 - Latching sleeve Brass CuZn40Pb3 C38500/C360 - 5-8 - Shielding ring Brass CuZn40Pb3 C38500/C360 - 3-7 - Nut Brass CuZn40Pb3 C38500/C360 5-8 - Half bushes Brass CuZn40Pb3 C38500/C360 - 5-8 - Socket contact (1) Cupro-nickel CuNi1Pb1P CDAC19150 - 3-5 0.5 Pin contact (1) Brass CuZn35Pb2 C35300/C360 - 3-5 0.5 Clip Beryllium copper CuBe1,9 C17200/C360 - - - (1) Gold thickness as per MIL-G-45204C type 1, class 00. Component Material Color Working Temperature Insert PEEK + 15%GF brown - 50C + 250C - 58F + 482F Collet PA 6/6 + MoS2 black - 55C + 125C - 67F + 257F * Mechanical and climatics Characteristics Values Standard Method Endurance > 1000 cycles (except for 0.7 mm crimp contacts for which endurance is limited to 500 cycles) MIL-STD 1344A 2016.1 Shock 50 g, duration 6 ms ; contact O 0.7 mm and 0.9 mm 100 g, duration 6 ms ; contact O 1.3 mm - 1.6 mm and 2 mm MIL-STD 1344A 2004.1 Vibrations 10 to 2000 Hz = 15 g, contact O 0.7 mm and 0.9 mm = 20 g, contact O 1.3 mm - 1.6 mm and 2 mm MIL-STD 1344A 2005.1 Protection index IP 40 CEI 529 } - 55C + 125C - 67F + 257F - - - 55C + 200C - 67F + 392F (only on request, consult SOURIAU) - - with plastic collets Operating temperature with optional metal collets 212 } Push Pull Connectors Wiring and assembly instructions * Panel cutout Size 00 0 1 2 3 OA 7.1 9.1 12.1 15.1 18.1 B 6.4 8.3 10.6 13.6 16.6 * Removable contacts Reliable design * Conical entry with chamfered edge on the socket contact and smooth slope on the pin contact ensure perfect concentric mating even when handled carelessly. * The pressure spring of the socket contact maintains a constant force on the pin contact when mated. Crimp contacts Contact Usable cables Core section (mm2) OC OF 0.7 0.9 1.3 1.6 2.0 0.85 1.1 1.4 1.9 2.4 Solder contacts min 0.129 0.205 0.326 0.823 1.309 Contact AWG Max. 0.326 0.518 0.823 2.081 3.309 22-24-26 20-22-24 18-20-22 14-16-18 12-14-16 Usable cables Core section (mm2) OC OF 0.7 0.9 1.3 1.6 2 0.7 0.8 1.1 1.5 1.9 min - Max. 0.30 0.21 0.60 0.93 1.34 AWG 26 24 20 18 16 Max. Contact Endurance current resistance (number rating (A) (m?) of cycles) 7 10 15 17 30 5 3.5 3 2.5 2.5 500 Max. > 1000 > 1000 > 1000 > 1000 Max. Contact Endurance current resistance (number rating (A) (m?) of cycles) 7 10 15 17 30 5 3.5 3 2.5 2.5 500 max > 1000 > 1000 > 1000 > 1000 The conductor bucket on the solder contacts is designed with an angle to form a cup into which the solder can flow easily. * Fixed contacts Solder contacts Contact OC OF Shell size 0.5 0.4 0.5 0.63 00 0-1 0-1-2-3 0.7 Contacts for PCB Usable cables Core section (mm2) Max. AWG Contacts for PCB PCB tail length size 0 0.7 mm female PCB tail length size 0 0.7 mm female PCB tail length size 1 0.7 mm female PCB tail length size 2 0.7 mm female PCB tail length size 3 0.9 mm female PCB tail length size 0 0.9 mm female PCB tail length size 1 0.9 mm female PCB tail length size 2 4.3 mm female PCB tail length size 1 4.3 mm female PCB tail length size 2 4.3 mm female PCB tail length size 3 213 0.06 0.096 0.15 30 28 26 Max. Contact Endurance current resistance (number rating (A) (m?) of cycles) 5 10 > 1000 7 5 > 1000 Contact length dimensions "L" dimension "L" 5.5 mm dimension "L" 3.5 mm dimension "L" 4.0 mm dimension "L" 6.0 mm dimension "L" 6.0 mm dimension "L" 3.5 mm dimension "L" 4.0 mm dimension "L" 6.0 mm dimension "L" 4.0 mm, dimension "F" 0.7 mm dimension "L" 6.0 mm, dimension "F" 0.7 mm dimension "L" 6.0 mm, dimension "F" 0.7 mm Push Pull Connectors Wiring and assembly instructions * Cable stripping for connectors with crimp contacts OI : diameter over insulation Shell size 0 O contacts 0.7 0.9 1.3 0.7 0.9 2 1.3 1.6 2.0 0.7 0.9 3 L ? 1.35 > 1.35 ? 1.6 > 1.6 ? 1.35 > 1.35 ? 1.6 > 1.6 ? 2.1 > 2.1 ? 1.35 > 1.35 ? 1.6 > 1.6 ? 2.1 > 2.1 ? 2.6 > 2.6 ? 3.2 > 3.2 ? 1.35 > 1.35 ? 1.6 > 1.6 ? 2.1 > 2.1 ? 2.6 > 2.6 ? 3.2 > 3.2 0.7 0.9 1 OI 1.3 1.6 2.0 15 15 16 16 16 19 19 19 21 21 25 25 25 27 27 Stripping for FD, SR, PC C 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 5.5 7 5.5 7 4 7 4 7 4 7 5.5 8.5 5.5 8.5 T L 7 19 7 19 8 22 8 22 8 22 9 28 9 28 9 28 9 28 9 28 10 35 10 35 10 35 10 35 10 35 Stripping for FC C 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 5.5 7 5.5 7 4 7 4 7 4 7 5.5 8.5 5.5 8.5 T 7 7 8 8 8 9 9 9 9 9 10 10 10 10 10 * Cable stripping for connectors with solder contacts Shell size O Contacts 00 0.5 0.5 0.7 0.9 0.5 0.7 0.9 1.3 0.7 0.9 1.3 1.6 2 0.7 0.9 1.3 1.6 2 0 1 2 3 L 9 11 12 12 12 13 13 13 16 16 16 18 18 20 20 20 22 22 Stripping for FD, SR, PC S 2 2 3 3 2 3 3 3.5 3 3 3.5 4 4 3 3 3.5 4 4 214 T 4 7 7 7 8 8 8 8 9 9 9 9 9 10 10 10 10 10 L / 16 16 16 19 19 19 19 25 25 25 25 25 30 30 30 30 30 Stripping for FC S / 2 3 3 2 3 3 3.5 3 3 3.5 4 4 3 3 3.5 4 4 T / 7 7 7 8 8 8 8 9 9 9 9 9 10 10 10 10 10 Push Pull Connectors Wiring and assembly instructions : STRAIGHT PLUG * Cable stripping : see page 16 * Connector preparation 1 - Select the proper collet A. (see page 19) 2 - Slide the protective boot A the backnut A and the collet A onto the cable. 3 - In case of a screened cable, combs out the screen and fold back over the collet A. * Contacts wiring : crimp contacts 1 - Select the proper crimping tool (see page 48) and locator according to the connectors involved. 2 - Adjust the tool selector for the corresponding conductor AWG. 3 - Crimp the contacts ? and then engage them into the insert cavities A till clip tightening. * Contacts wiring : solder contacts Fixed solder contacts 0.5 mm and 0.7 mm Removable solder contacts from 0.9 mm to 2 mm 1 - Terminate the bucket contacts using solder method 1 - Solder the conductors to the contact buckets then engage them into the insert cavities A till clip holding * Connector assembly Flats A Window 1 - Position 2 half bushes ? on the insert A making sure that the insert key appears through window of one bush. 2 - Position the collet and the half bushes while maintaining the screen. Bush keys are seated in the collet keying slots. 3 - Position all the sub-assembly in the connector housing ? making sure to keep sub-assembly aligned. 4 - Install the backnut A and screw it. Use the two wrenches well positionned on the flats A and B. Place a wrench to grip flats B, use the other wrench to tighten the backnut at the flats A following the torque values on page 19. Flats B 5 - Install the protective boot A if exists. 215 Push Pull Connectors Wiring and assembly instructions : 90 ELBOW PLUG * Cable stripping : see page 16 * Connector preparation 1 - Select the proper collet A (see page 19). 2 - Slide the protective boot ?, the backnut A, the collet A and the elbow outlet A onto the cable. 3 - In case of a screened cable, comb out the screen and fold back over the collet A. 4 - Position in the elbow outlet making sure the anti-rotating keys are well aligned. Braid 5 - Tighten the backnut A till bottomed. 6 - Install the protective boot ? if exists. * Contacts wiring : crimp contacts 1 - Select the proper crimping tool (see page 49) and positionner according to connectors involved. 2 - Adjust the tool selector for the corresponding conductor AWG. 3 - Crimp the contacts ? then engage them into the insert cavities A till clip tightening. A * Contacts wiring : solder contacts Fixed solder contacts 0.5 mm and 0.7 mm Removable solder contacts from 0.9 mm to 2 mm 1 - Terminate the bucket contacts using solder method 1 - Solder the conductors to the contact buckets then engage them into the insert cavities A till clip holding * Connector assembly 1 - Position the ring ? on the insert engage all in the spacer C. A then 2 - Position all the sub-assembly in the connector housing E with milled flats A of the elbow outlet facing to the rear of the plug housing. Milled flats A 3 - Tighten the screw E at the torque values defined on page 19. 216 Push Pull Connectors Wiring and assembly instructions * Collets selection according to cable diameters 4 or 6 collets per shell size allow a wide range of cable diameters for a single connector ; outer cable diameters are for reference only, since values will change with specific manufacturers cable properties. Collet number 2 1 4 6 3 5 Cable diameter Shell size 00 Shell size 0 Shell size 1 Shell size 2 Shell size 3 1 1.1 - 1.9 1.5 - 2.5 2.0 - 2.5 3.5 - 4.7 4.9 - 6 2 2 - 2.8 2.6 - 3.5 2.6 - 3.5 4.8 - 5.7 6.1 - 7.2 3 2.9 - 3.5 3.6 - 4.5 3.6 - 4.5 5.8 - 6.7 7.3 - 8.4 4 - 4.6 - 5.5 4.6 - 5.5 6.8 - 7.7 8.5 - 9.6 5 - - 5.6 - 6.6 7.8 - 8.7 9.7 - 10.8 6 - - 6.7 - 7.5 8.8 - 9.7 10.9 - 12.0 * Coupling torques Tools (jaw dimensions) Size 7 x 0.5 9 x 0.6 12 x 1 15 x 1 18 x 1 Metal collet available for all sizes Advised torques* in Nm 00 0 1 2 3 00 0 1 2 3 7 11 14 17 21 0.5 0.7 1.3 1.7 2 6 8 10 13 15 0.7 0.8 1 1.5 2 6 9 11 14 16 0.7 0.8 1 1.5 2 - 10 12 15 17 - - 10 13 17 20 0.5 0.7 1.3 1.7 2 - 9 13 15 - - - - - - 0.4 to 0.5 0.5 to 0.7 Discreet application based on cable diameter Torque values are the maximum allowable for each connector size. Torque values will vary due to the type and size of the cable used. *Apply thread lock to back nut prior to assembly. Note : All the tooling numbers refer to the drawings page 205 * Shielding Tested according to MIL-STD 1344 A, method 3007 mV G A 217 Shell size Electrical continuity (m) 00 4.5 0 4 1 3 2 2.5 3 2.5 JBX Plug Assembly Instructions 1. Determine what size cable you will be using. Then select the proper collet number for that cable. * Collets selection according to cable diameter 3 or 5 collets per shell size allow a wide range of cable diameters for a single connector. Cable out diameters are for information only, since values will change with each cable construction. Cable Diameter Collet Number Shell Size 0 Size 0, Option G Shell Size 1 Size 1, Option G 1 1.5 - 2.5 -- 2 - 2.5 -- 2 2.6 - 3.5 -- 2.6 - 3.5 -- 3 3.6 - 4.5 -- 3.6 - 4.5 6.1 - 6.7 4 -- -- 4.6 - 5.5 4.6 - 5.5 6.8 - 7.7 5.6 - 6 5.6 - 6 7.8 - 8 5 Collet number 4 in shell size 0 and collet number 6 in shell size 1 are not used 2. Strip the cable and each wire to the required strip length. * Cable stripping for connectors with crimp contacts Stripping for FD, SR, PC Shell Size o Contacts L 0.7 0 0.9 0.7 1 0.9 1.3 0.7 0.9 2 1.3 1.6 2.0 0.7 0.9 3 1.3 1.6 2.0 Stripping for FC oI 1.35 >1.35 1.6 >1.6 1.35 >1.35 1.6 >1.6 2.1 >2.1 1.35 >1.35 1.6 >1.6 2.1 >2.1 2.6 >2.6 3.2 >3.2 1.35 >1.35 1.6 >1.6 2.1 >2.1 2.6 >2.6 3.2 >3.2 15 15 16 16 16 19 19 19 21 21 25 25 25 27 27 C 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 5.5 7 5.5 7 4 7 4 7 4 7 5.5 8.5 5.5 8.5 218 T L 7 19 7 19 8 22 8 22 8 22 9 28 9 28 9 28 9 28 9 28 10 35 10 35 10 35 10 35 10 35 C 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 5.5 7 5.5 7 4 7 4 7 4 7 5.5 8.5 5.5 8.5 T 7 7 8 8 8 9 9 9 9 9 10 10 10 10 10 JBX Plug Assembly Instructions * Cable stripping for connectors with solder contacts Shell Size o Contacts 00 0 1 2 3 Stripping for FD, SR, PC Stripping for FC L S T L S 0.5 9 2 4 / / T / 0.5 11 2 7 16 2 7 0.7 12 3 7 16 3 7 0.9 12 3 7 16 3 7 0.5 12 2 8 19 2 8 0.7 13 3 8 19 3 8 0.9 13 3 8 19 3 8 1.3 13 3.5 8 19 3.5 8 0.7 16 3 9 25 3 9 0.9 16 3 9 25 3 9 1.3 16 3.5 9 25 3.5 9 1.6 18 4 9 25 4 9 2.0 18 4 9 25 4 9 0.7 20 3 10 30 3 10 0.9 20 3 10 30 3 10 1.3 20 3.5 10 30 3.5 10 1.6 22 4 10 30 4 10 2.0 22 4 10 30 4 10 3. When assembling a plug with a protective boot (#3), prep the cable by taking the protective boot and sliding it with the small inside diameter first onto the cable. Then slide the end of the back nut (#2) that has the smaller diameter onto the cable. Next, take the collet (#1) and slide the end with the gripping teeth first onto the cable until the opposite end of the collet is flush with the cut end of the jacket. If the cable has shielding, fold back the braid so that it is covering the outside diameter of the collet. Do not place braid into any area of the alignment slots. Then insure that the braid does not interfere with the alignment slots of the collet. 4. Attach removable contacts to wires: a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires using the proper crimping tool set on the correct AWG wire. (see FIGURE 4.A). After the contact has been crimped to the wire, check each contact to insure that the contact is securely crimped to the wire. 219 JBX Plug Assembly Instructions Locator for pin and socket 0.7 - 0.9 mm and 1.3 mm contacts FIGURE 4.A Shell Size Male Contact o Contacts AWG 0.7 Female Contact Souriau P/N Daniels P/N Astro P/N Souriau P/N Daniels P/N Astro P/N 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LP07 86 - 224 / 0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LP09 86 - 226 / 0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LP07 86 - 197 642 - 004 0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LP09 86 - 199 642 - 005 1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LP13 86 - 201 642 - 006 0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LP07 86 - 203 642 - 010 0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LP09 86 - 205 642 - 011 1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LP13 86 - 207 642 - 012 0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LP07 86 - 214 642 - 017 0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LP09 86 - 215 642 - 018 1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LP13 86 - 216 642 - 019 0 1 2 3 Turret with locator for pin and socket 1.6 mm and 2 mm contacts Male and Female Contacts Shell Size o Contacts AWG Souriau P/N Daniels P/N Astro P/N 1.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030 2 2 12 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031 1.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038 2 12 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035 3 Crimping Tool Specifications MIL-C-22520 / 7.01 Contacts 0.7 mm - 0.9 mm and 1.3 mm MIL P/N - Souriau P/N Supplier P/N MIL-22520/7-01 Daniels: MH860 MIL P/N - Souriau P/N Supplier P/N MIL-22520/1-01 Daniels: AF8 Buchanan: 615708 Specifications MIL-C-22520 / 1.01 Contacts 1.6 mm and 2 mm b. If using soldered contacts, prep each wire with flux and then tin dip each exposed wire end. Next pre-load a piece of heat shrink onto the wire (Individual heat shrink tubes are optional). Solder each wire to the solder cup end of the contact. To avoid shorts, make sure that no solder comes in contact with any other contact or wire on the connector. After the contact has been soldered to the wire, check each contact to insure that the contact is securely soldered to the wire. Slide the pre-loaded heat shrink over the solder joint and shrink into place. Do not over-heat the solder joint area as it can cause the solder to re-flow or it could burn the wire insulation. 220 JBX Plug Assembly Instructions 5. If inserting removable contacts: a. Starting with the interface end of the contact, carefully insert each contact into the backside of the insulator that has the position loading path indicator (worm) on it. Start with the end of the position loading path indicator (worm) that has the half circle on it (Position #1). Then follow the position loading path indicator (worm) around the insulator. You will go counter clockwise if using a male contact and clockwise if using a female contact (see diagram below for the position loading path indicator (worm) layout). If the connector has center contacts, it is sometimes easier to start at the end of the position loading path indicator (worm) (last position) and work backwards. This is up to the assembler and the process they are using to insert the contacts. Make sure not to bend the contact when inserting it into the insulator. It is extremely important that the contact is completely seated in to the insulator. For the connector to function properly, the contact should click/snap into place when seated. To confirm the seating of the contact, check each contact for proper seating. 6. Removal of contacts: a. Using the proper extraction tool insert the tool over the front of the contact and push contact out. Failure to use the proper extraction tool can result in damage to the contact. TOOLINGS - JBX - JKX Manual Extraction Tools Contacts automatically extracted without pulling on the cable. The extraction tool is the same for both male and female contacts. Shell Size o Contacts Souriau Part Number Astro Part Number 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 1.6 JBX OUT DC 16 ATJP 2095 2.0 JBX OUT DC 20 ATJP 2115 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 1.6 JBX OUT DC 16 ATJP 2095 2.0 JBX OUT DC 20 ATJP 2115 0 1 2 3 7. Take the keyed half bushing (#6) and place it over the insulator so that the window is lined up with the key on the insulator and the key on the half bushing is pointing to the back of the insulator (position loading path indicator (worm end)). Then take the half bushing without the window (#6) and place on the opposite side of the insulator so that both half bushings are aligned with each other. 221 JBX Plug Assembly Instructions 8. Take the collet that is pre-loaded on the cable and align the slots in the collet with the keys on the end of the half bushings (you may need to move the braid away from the slots and spin the collet slightly). Once they are aligned, compress the assembly so that it is in line and there are no gaps between the collet & the half bushings. The braid should still be in place once the assembly is inserted. 9. Take a connector housing (#7) and slide it over the insulator so that the red dot on the connector housing lines up with the key on the half bushing with window. Push the whole assembly into the connector housing until it bottoms out. Insure that the keys are seated properly by turning the collet that is already aligned with the half bushings. If the collet does not turn, then the keys are correctly aligned. If the collet does turn, then you must withdraw the assembly & realign the keys. 10. Once the assembly is installed into the connector housing and is aligned properly, apply thread lock to thread area. Then slide the back nut up until you can manually start the back nut threads onto the threaded end of the connector housing. Tighten the back nut up as far as you can by hand, then take the appropriate wrenches and place the wrenches onto the flats located on the connector housing. Do not over torque back nut as it can cause connector failure. 11. If the connector requires a protective boot, slide the boot over the lip on the back nut. 12. Potting of backend of plug with clipped contacts: Clipped contacts are designed to float in the connector so that they self align when mated. It is sometimes necessary to pot the back end of the connector so that the contacts are sealed off from the environment. When this application is needed, it is recommended that the assembler engage a mating connector/alignment tool to the assembly being potted. Once the mating connector/alignment tool is engaged, it must be left engaged until the potting compound has hardened. This will insure that the true position requirements are met. If the application is for low volume, a mating connector can be used. If the application is for high volume, it is recommended that an alignment tool be purchased from the supplier. Trouble Shooting Problem: Cause: Correction: Contact will not seat in connector, contact backing out. Wrong wire or insulation size, wrong strip length, poor crimping, broken clips, damaged insulator, removed contact without proper removal tool, bad crimp. Use correct wire, adjust strip length, strip and recrimp with new contact, replace insulator, using wrong crimp tool, replace contact. Bent solder contact Bent in handling, bent in soldering operation, connector assembled incorrectly. Replace insert with contacts. Pins and insulator were inserted into electrical test while unprotected by shell Connector will not release from mating part or operate correctly Not using flats on latching sleeve and back nut to torque connector, improper assembly of the connector, over mold material inside connector. Release back nut and re-torque, disassemble and reassemble, replace connector. Over tightened the back nut. Connector will not release from mating part or operate correctly, damage connector. Loosen back nut and retighten. Collet will not grip cable. Loose cable in connector. Check correct collet size is being used. Connector will not assemble. Incorrect alignment of key in connector, half bushings, connector housing, insulator, collet, braid in key slots in collet. Disassemble connector and reassemble connector-aligning keys, relocate braid in collet. Contact stubbing after mating. Bent contact and damaged contact, connectorassembled incorrectly. Re-align contact, replace insert with contacts. Electrical failure. Improper crimping, wrong wire strip length, wire loading incorrect location, poor solder joint. Remove contact with correct removal tool, reinstall new contact, and verify strip length. 222 JBX Receptacle Assembly Instructions 1. Select the proper JBX receptacle and contact size for the specific cable application by using the contact layout chart as depicted in the Push Pull catalog. 2. Strip the cable/wire to the required strip length. Wiring and assembly instructions Cable stripping for connectors with crimp contacts Stripping for FD, SR, PC Shell Size o Contacts 0.7 0 0.9 0.7 1 0.9 1.3 0.7 0.9 2 1.3 1.6 2.0 0.7 0.9 3 1.3 1.6 2.0 oI 1.35 >1.35 1.6 >1.6 1.35 >1.35 1.6 >1.6 2.1 >2.1 1.35 >1.35 1.6 >1.6 2.1 >2.1 2.6 >2.6 3.2 >3.2 1.35 >1.35 1.6 >1.6 2.1 >2.1 2.6 >2.6 3.2 >3.2 L 15 15 16 16 16 19 19 19 21 21 25 25 25 27 27 C 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 5.5 7 5.5 7 4 7 4 7 4 7 5.5 8.5 5.5 8.5 223 Stripping for FC T 7 7 8 8 L 19 19 22 22 8 22 9 28 9 28 9 28 9 9 10 28 28 35 10 35 10 35 10 35 10 35 C 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 5.5 7 5.5 7 4 7 4 7 4 7 5.5 8.5 5.5 8.5 T 7 7 8 8 8 9 9 9 9 9 10 10 10 10 10 JBX Receptacle Assembly Instructions Wiring and assembly instructions Cable stripping for connectors with solder contacts Shell Size o Contacts 00 0 1 2 3 Stripping for FD, SR, PC Stripping for FC L S T L S 0.5 9 2 4 / / T / 0.5 11 2 7 16 2 7 0.7 12 3 7 16 3 7 0.9 12 3 7 16 3 7 0.5 12 2 8 19 2 8 0.7 13 3 8 19 3 8 0.9 13 3 8 19 3 8 1.3 13 3.5 8 19 3.5 8 0.7 16 3 9 25 3 9 0.9 16 3 9 25 3 9 1.3 16 3.5 9 25 3.5 9 1.6 18 4 9 25 4 9 2.0 18 4 9 25 4 9 0.7 20 3 10 30 3 10 0.9 20 3 10 30 3 10 1.3 20 3.5 10 30 3.5 10 1.6 22 4 10 30 4 10 2.0 22 4 10 30 4 10 3. Depending on application and shell type, the nut and washer may be removed before attaching the wires to the contacts. 4. Attach crimped contacts to wires: a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires using the proper crimping tool and locator set on the correct AWG wire size (see FIGURE 4.A). After the contact has been crimped to the wire, check each contact to insure that the contact is securely crimped. Locator for pin and socket 0.7 - 0.9 mm and 1.3 mm contacts FIGURE 4.A Shell Size Male Contact o Contacts AWG 0.7 Female Contact Souriau P/N Daniels P/N Astro P/N Souriau P/N Daniels P/N Astro P/N 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LP07 86 - 224 / 0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LP09 86 - 226 / 0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LP07 86 - 197 642 - 004 0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LP09 86 - 199 642 - 005 1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LP13 86 - 201 642 - 006 0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LP07 86 - 203 642 - 010 0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LP09 86 - 205 642 - 011 1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LP13 86 - 207 642 - 012 0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LP07 86 - 214 642 - 017 0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LP09 86 - 215 642 - 018 1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LP13 86 - 216 642 - 019 0 1 2 3 224 JBX Receptacle Assembly Instructions Turret with locator for pin and socket 1.6 mm and 2 mm contacts Male and Female Contacts Shell Size o Contacts AWG Souriau P/N Daniels P/N Astro P/N 1.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030 2 12 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031 1.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038 2 12 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035 2 3 Crimping Tool Specifications MIL-C-22520 / 7.01 Contacts 0.7 mm - 0.9 mm and 1.3 mm MIL P/N - Souriau P/N Supplier P/N MIL-22520/7-01 Daniels: MH860 MIL P/N - Souriau P/N Supplier P/N MIL-22520/1-01 Daniels: AF8 Buchanan: 615708 Specifications MIL-C-22520 / 1.01 Contacts 1.6 mm and 2 mm b. If using clipped solder contacts, prep each wire with flux and then tin dip each exposed wire end. Next pre-load a piece of heat shrink onto the wire (Individual heat shrink tubes are optional). Solder each wire to the solder cup end of the contact. To avoid shorts, make sure that no solder comes in contact with any other contact or wire on the connector. After the contact has been soldered to the wire, check each contact to insure that the contact is securely soldered to the wire. Slide the pre-loaded heat shrink over the solder joint and shrink into place. Do not over-heat the solder joint area as it can cause the solder to re-flow or it could burn the wire insulation. 5. If inserting terminated contacts: a. Starting with the interface end of the contact, insert each contact into the backside of the insulator that has the position loading path indicator (worm) on it. Start with the end of the position loading path indicator (worm) that has the half circle on it (Position #1). Then follow the position loading path indicator (worm) around the insulator. You will go counter clockwise if using a male contact and clockwise if using a female contact (see diagram below for the position loading path indicator (worm) layout). If the connector has center contacts, it is sometimes easier to start at the end of the position loading path indicator (worm) (last position) and work backwards. This is up to the assembler and the process used to insert the contacts. Make sure not to bend the contact when inserting it into the insulator. It is extremely important that the contact is seated in the insulator for the connector to function properly. The contact should click/snap into place when seated. Check each contact for proper seating. Removal of contacts: Using the proper extraction tool (See FIGURE 6.A), insert the tool over the front of the contact and push contact out. Failure to use the proper extraction tool can result in damage to the contact. 225 JBX Receptacle Assembly Instructions Manual extraction tools The extraction tool is the same for both male and female contacts. FIGURE 6.A Shell Size o Contacts Souriau Part Number Astro Part Number 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 1.6 JBX OUT DC 16 ATJP 2095 2.0 JBX OUT DC 20 ATJP 2115 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 1.6 JBX OUT DC 16 ATJP 2095 2.0 JBX OUT DC 20 ATJP 2115 0 1 2 3 7. Potting of backend of receptacle with clipped contacts Clipped contacts are designed to float in the connector so that they self align when mated. It is sometimes necessary to pot the backend of the connector so that the contacts are sealed off from the environment. When this application is needed, it is recommended that the assembler engage a mating connector/alignment tool to the assembly being potted. Once the mating connector/alignment tool is engaged, it must be left engaged until the potting compound has hardened. This will insure that the true position requirements are met. If the application is low volume, a mating connector can be used. If the application is for high volume, it is recommended that an alignment tool be purchased from the supplier. Trouble shooting Problem: Cause: Correction: Contact will not seat in connector, contact backing out. Wrong wire or insulation size, wrong strip length, poor crimping, broken clips, damaged insulator, removed contact without proper removal tool, bad crimp. Use correct wire, adjust strip length, strip and recrimp with new contact, replace insulator, using correct crimp tool, replace contact. Bent solder contact Bent in handling, bent in soldering operation, connector assembled incorrectly. Re-align contact, replace insert with contacts. Contact stubbing after mating. Bent contact and damaged contact, connectorassembled incorrectly. Re-align contact, replace insert with contacts. If using clipped contacts and receptacle is potted, a mating connector must be applied to the connector that is being potted. This insures that the contacts will be properly aligned. Electrical failure. Improper crimping, wrong wire strip length, wire loading incorrect location, poor solder joint. Remove contact with correct removal tool, reinstall new contact, and verify strip length. 226 Environmentally Sealed Push Pull Connectors Key features * Sealed IP 68 (mated connectors) * Mechanically keyed : ensures correct polarization and alignment. * Contact arrangements : from 2 to 10 contacts. * Wire gauge range from 28 AWG to 14 AWG. * High contact density in a small space. * Contact termination in either crimp, solder, PC or right angle PCB contacts. User advantages Temporary immersion IP 68 6-collet cluster Removable contacts Allows a wide range of cable diameter applications for a single connector. Reduces inventory Crimp versions allow easier wiring and maintenance. Part number system JKX Basic series FD 1 G 05 Shell configuration FD - ER - EP - PC Size 0-1 Keying G Contact layouts 02 ---------- 10 (see page 33) Contact type M : pin Contact termination C : crimp ; S : solder ; P* : straight PCB tails ; Q* : 90 PCB tails Material & surface plating S : Outer shell in brass alloy with glossy chrome over nickel N : Outer shell in brass alloy with black plating (consult SOURIAU US) D : Obligatory suffix M C SDS F : socket (in relation with keying) S : All contact diamete except 0.5 mm P : 0.5 mm contacts only Options M : Connector with backnut for protective boot (protective boot to order separately page 34) G : Connector with adaptation to accomodate big cables (O 4.5 to 6 in size 0 and O 6 to 8 in size 1) R : Red dot (possible for FD, PC, ER only) * For receptacles with female contacts only. 227 M Environmentally Sealed Push Pull Connectors Shell type * Available JKX shells ER : fixed receptacle, front panel mounting FD : straight plug with cable clamping EP : fixed receptacle, back panel mounted (appropriate with 900 contacts for PCB) PC : cable mounted receptacle * Dimensions ER : Fixed receptacle, front panel mounting FD : Straight plug with cable clamping Size A B C OD Size A OB OM 0 19.5 4.5 4 18 0 47 12 1.5 to 4.5 1 24.5 8.5 4.5 20 1 57 15 2 to 6 EP : Fixed receptacle, back panel mounting PC : Cable mounted receptacle Size A B C OD Size A OB OC 0 19.5 4.5 3.2 18 0 _ _ _ 1 24.5 6 4 20 1 60 16 2 to 6 Size A OB OM 0 51 12 4.6 to 6 1 60 15 6 to 8 * Option G : to accomodate bigger cables 228 Environmentally Sealed Push Pull Connectors Keying Only G keying is available in standard version (0 keying angle, plugs with pin contacts, receptacles with female contacts) for the shell styles. Shell size Key ER EP PC FD 0 G l l _ l 1 G l l l l l Concerning the availability of other alternatives, please consult our commercial office. Contacts * Multi contacts inserts Shell size Male insulator Contact viewed from layout wiring side Available Contact types S solder C crimp P* straight Q* 90 PCB tails PCB tails O Contact AWG Solder Crimp wire wire Max. Max. Max. current rating (A) Testing voltage (Vrms) Working voltage (Vdc / Vrms) 02 S C P Q 0.9 24 20 10 1400 660/460 03 S C P Q 0.9 24 20 8 1300 600/420 04 S C P Q 0.7 26 22 7 1400 660/460 05 S C P Q 0.7 26 22 6.5 800 400/260 06 S P 0.5 28 - 2.5 680 320/220 07 S P 0.5 28 - 2.5 680 320/220 02 S C 1.3 20 18 15 1600 760/530 03 S C 1.3 20 18 12 1300 600/420 04 S C P Q 0.9 24 20 10 1900 900/630 05 S C P Q 0.9 24 20 9 1400 660/460 06 S C P Q 0.7 26 22 7 1400 660/460 07 S C P Q 0.7 26 22 7 1400 660/460 08 S C P Q 0.7 26 22 5 1200 600/420 10 S 0.5 28 - 2.5 600 300/200 0 1 Inserts with fixed contacts (non removable contacts) * For receptacles with female contacts only 229 Environmentally Sealed Push Pull Connectors Options * Protective boot Part number Shell size Shell size option G OA Dimensions O Cable L min Max. JBX 0 MP* 0 - 2.2 20 1.5 5.5 JBX 1 MP* 1 0 2.6 25 2 7.5 JBX 2 MP* - 1 4 30 3.5 9.7 * Color code Colors Color code Material : ELASTOLLAN (PUR) A blue B white Working temperature : G grey - 40C ; + 80C J yellow - 40F ; + 176F M brown N black R red V green O orange Parts that require a protective boot need to be ordered with an M suffix. Protective boots are ordered separately. With each JKX connector, one protective boot can accept diverse cable diameters thus the end-user can manage various cable diameters without bothering with multiple part numbers. * Caps : Protect the recptacle to IP68 Part number O JKX BR0 14 JKX BR1 16 230 Environmentally Sealed Push Pull Connectors Technical characteristics * Material and treatment Standard Component Surface treatment (m) Material ISO ASTM Cr Ni Au Outer shell and collet nut Brass CuZn40Pb3 C38500/C360 0.1 - 0.6 5-8 - Latching sleeve Brass CuZn40Pb3 C38500/C360 - 5-8 - Shielding ring Brass CuZn40Pb3 C38500/C360 - 3-7 - Nut Brass CuZn40Pb3 C38500/C360 5-8 - Tapered washer and half bushes Brass CuZn40Pb3 C38500/C360 - 5-8 - Socket contact (1) Cupro-nickel CuNi1Pb1P CDAC19150 - 3-5 0.5 Pin contact (1) Brass CuZn35Pb2 C38500/C360 - 3-5 0.5 Clip Beryllium copper CuBe1,9 C17200/C360 - - - (1) Gold thickness as per MIL-G-45204C type 1, class 00. Component Material Color Temperature withstanding Insert PEEK + 30%GF brown - 50C + 250C - 58F + 482F Collet PA 6/6 + MoS2 black - 55C + 125C - 67F + 257F Cable seal Silicon rubber red - 50C + 250C - 58F + 482F * Mechanical and climatics Characteristics Values Standard Method Endurance > 1000 cycles (except for 0.7 mm crimp contacts for which endurance is limited to 500 cycles) MIL-STD 1344A 2016.1 Shock 50 g, duration 6 ms ; contact O 0.7 mm and 0.9 mm 100 g, duration 6 ms ; contact O 1.3 mm - 1.6 mm and 2 mm MIL-STD 1344A 2004.1 Vibrations 10 to 2000 Hz = 15 g, contact O 0.7 mm and 0.9 mm = 20 g, contact O 1.3 mm - 1.6 mm and 2 mm MIL-STD 1344A 2005.1 Protection index IP 68 (watertight - 48 hours under 1 m of water) CEI 529 } - 55C + 125C - 67F + 257F - - - 55C + 200C - 67F + 392F (only on request, consult SOURIAU) - - with plastic collets Operating temperature with optional metal collets 231 } Environmentally Sealed Push Pull Connectors Wiring and assembly instructions * Panel cutout Size 0 1 OF 14.1 16.1 L 12.6 14.6 * Removable contacts Reliable design * Conical entry with chamfered edge on the socket contact and smooth slope on the pin contact ensure perfect concentric mating even when handled carelessly. * The pressure spring of the socket contact maintains a constant force on the pin contact when mated. Crimp contacts Contact Usable cables Core section (mm2) OC OF 0.7 AWG Max. Contact Endurance current resistance (number rating (A) (m?) of cycles) min Max. 0.85 0.129 0.326 22 - 24 - 26 7 5 500 Max. 0.9 1.1 0.205 0.518 20 - 22 - 24 10 3.5 > 1000 1.3 1.4 0.326 0.823 18 - 20 - 22 15 3 > 1000 Solder contacts Contact Usable cables Core section (mm2) OC OF 0.9 0.8 - 0.21 24 10 3.5 > 1000 1.3 1.1 - 0.60 20 15 3 > 1000 min AWG Max. Contact Endurance current resistance (number rating (A) (m?) of cycles) Max. The conductor bucket on the solder contacts is designed with an angle to form a cup into which the solder can flow easily. * Fixed contacts Solder contacts Contact Usable cables Core section (mm2) Max. AWG Max. Contact Endurance current resistance (number rating (A) (m?) of cycles) OC OF Shell size 0.5 0.5 0-1 0.096 28 5 10 > 1000 0.7 0.63 0-1 0.15 26 7 5 > 1000 Contacts for PCB Contact OC OF Shell size 0.5 0.5 0 5.5 0 1 0 1 5 6 5 6 0.7 0.5 0.9 0.7 232 L Max. Contact Endurance current resistance (number rating (A) (m?) of cycles) > 1000 10 5 7 5 > 1000 10 3.5 > 1000 Environmentally Sealed Push Pull Connectors Wiring and assembly instructions * Cable stripping for connectors with crimp contacts Shell size O Contacts ? 1.6 15 > 1.6 OI : diameter over insulation ? 1.35 0.7 1 15 > 1.35 0.9 17 > 1.35 ? 1.6 0.9 17 > 1.6 ? 2.1 1.3 Stripping for FD / PC C L ? 1.35 0.7 0 OI 17 > 2.1 T 4 7 5.5 4 7 5.5 4 8 5.5 4 8 5.5 4 8 5.5 * Cable stripping for connectors with solder contacts Shell size O Contacts 0.5 0.7 0.9 0.5 0.7 0.9 1.3 0 1 L 11 12 12 13 14 14 14 Stripping for FD / PC S 2 3 3 2 3 3 3.5 * Watertightness design (mated connectors) Fixed receptacle Straight plug A : O'ring for sealing between receptacle and plug shell A : O'ring for sealing between receptacle and panel A : O'ring for sealing between plug body and backshell ? : seals to accomodate variety of cable diameters 233 T 7 7 7 8 8 8 8 Environmentally Sealed Push Pull Connectors Wiring and assembly instructions : STRAIGHT PLUG * Cable stripping : see page 37 * Connector preparation 1 - Select the proper collet gland A (see page 39). ? and the cable 2 - Slide protective boot ?, the backnut A, the collet ?, the cable gland A, the outershell A and the taper seat A onto the cable. * Contacts wiring : crimp contacts 1 - Select the proper crimping tool (see page 49) and positionner according to connectors involved. 2 - Adjust the tool selector for the corresponding conductor AWG. 3 - Crimp the contacts C then engage them into the insert cavities ? till clip tightening. * Contacts wiring : solder contacts Fixed solder contacts 0.5 mm and 0.7 mm Removable solder contacts from 0.9 mm to 1.3 mm 1 - Terminate the bucket contacts 1 - Solder the conductors to the contact buckets them engage them into the insert cavities ? till clip tightening using solder method * Connector assembly 1 - In case of screened cable, comb out the screen and fold back over the tapper seat A. 2 - Position 2 half bushes E, making sure that the insert key appears through the windows of one bush. 3 - Position the taper seat A on the half bushes E. 4 - Position all the sub-assembly in connector housing E, making sure to keep the subassembly well aligned. 5 - Screw the outershell A following the torque values on page 39. Install the cable gland A and the collet ? into the outershell A then screw the backnut A till bottoming. Use 2 wrenches well positionned on the flats A and B. Place a wrench to grip tighten flats B, use the other wrench to the backnut at the flats A following the torque values on page 39. 6 - Install the protective boot ? if exists. 234 Environmentally Sealed Push Pull Connectors Wiring and assembly instructions * Collets selection according to cable diameters 3 or 5 collets per shell size allow a wide range of cable diameters for a single connector. Cable out diameters are for information only, since values will change with each cable construction. Collet number 2 1 2 3 4 5 1 4 6 3 5 Shell size 0 1.5 - 2.5 2.6 - 3.5 3.6 - 4.5 - Cable diameter Size 0, option G Shell size 1 2 - 2.5 2.6 - 3.5 3.6 - 4.5 4.6 - 5.5 4.6 - 5.5 5.6 - 6 5.6 - 6 Size 1, option G 6.1 - 6.7 6.8 - 7.7 7.8 - 8 Collet number 4 in shell size 0 and collet number 6 in shell size 1 are not used. * Glands selection to accomodate cable diameters Cable gland OA 2 3.5 2.5 4 5.5 7 OA Shell size 0 1.5 - 2.9 3 - 4.5 Cable diameter Size 0, option G Shell size 1 Size 1, option G 2 - 3.4 3.5 - 4.9 5-6 4.6 - 4.9 5-6 6.1 - 6.4 6.5 - 8 * Shielding Tested according to MIL-STD 1344 A, method 3007 mV Shell size Electrical continuity (m?) 0 4 1 3 A G * Coupling torques Tools Advised torque* in Nm Size 0 0 (option G) 1 1 Size (option G) 16 x 1 14 x 1 (jaw dimensions) 0 1.6 / 1.8 / 1.5 2 2 2.5 8 0.8 0.8 1 1 10 0 (option G) 1 17 19 235 13 10 11 Tool numbers can be found on page 228. Torque values are the maximum allowable for each connector size. Torque values will vary due to the type and size of the cable used. *Apply thread lock to back nut prior to assembly. 1 (option G) 12 14 JKX Plug Assembly Instructions 1. Determine what size cable you will be using. Then select the proper collet number for that cable. Straight Plug Assembly Protective Boot * Collets selection according to cable diameter 3 or 5 collets per shell size allow a wide range of cable diameters for a single connector. Cable out diameters are for information only, since values will change with each cable construction. Cable Diameter Collet Number Shell Size 0 Size 0, Option G Shell Size 1 Size 1, Option G 1 1.5 - 2.5 -- 2 - 2.5 -- 2 2.6 - 3.5 -- 2.6 - 3.5 -- 3 3.6 - 4.5 -- 3.6 - 4.5 6.1 - 6.7 4 -- -- 4.6 - 5.5 4.6 - 5.5 6.8 - 7.7 5.6 - 6 5.6 - 6 7.8 - 8 5 Collet number 4 in shell size 0 and collet number 6 in shell size 1 are not used 2. Strip the cable and each wire to the required strip length. * Cable stripping for connectors with crimp contacts Stripping for FD/PC Shell Size o Contacts oI L 1.35 >1.35 1.6 >1.6 1.35 >1.35 1.6 >1.6 2.1 >2.1 0.7 0 0.9 0.7 1 0.9 1.3 C T 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 15 15 17 17 17 7 7 8 8 8 * Cable stripping for connectors with solder contacts Shell Size 0 1 o Contacts Stripping for FD/PC L S T 0.5 11 2 7 0.7 12 3 7 0.9 12 3 7 0.5 13 2 8 0.7 14 3 8 0.9 14 3 8 1.3 14 3.5 8 236 JKX Plug Assembly Instructions 3. When assembling a plug with a protective boot, prep the cable by taking the protective boot (#6) and sliding it with the small inside diameter first onto the cable. Then slide the small diameter end of the back nut (#5) onto the cable. Next, take the collet (#4) and slide the end with the gripping teeth (See below) first onto the cable. Then take a cable gland (#3) and slide it onto the cable. Once the cable gland is in place take an outer shell (#2) and slide it onto the cable with the outside threads going onto the cable first. Then take the flat end of a taper seat (#1) and slide that onto the cable so that the chamfer side is pointing outward. Collet Connector Preparation 4. Attach removable contacts to wires: a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires using the proper crimping tool set on the correct AWG wire size After the contact has been crimped to the wire, check each contact to insure that the contact is securely crimped to the wire. Crimping Tool Specifications MIL-C-22520 / 7.01 Contacts 0.7 mm - 0.9 mm and 1.3 mm MIL P/N - Souriau P/N Supplier P/N MIL-22520/7-01 Daniels: MH860 Buchanan: 616 336 MIL P/N - Souriau P/N Supplier P/N MIL-22520/1-01 Daniels: AF8 Buchanan: 615 708 Specifications MIL-C-22520 / 1.01 Contacts 1.6 mm and 2 mm 237 JKX Plug Assembly Instructions Locator Pin and Socket .07-.09 mm and 1.3 mm contacts Shell Size Male Contact o Contacts AWG 0.7 Female Contact Souriau P/N Daniels P/N Astro P/N Souriau P/N Daniels P/N Astro P/N 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LP07 86 - 224 / 0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LP09 86 - 226 / 0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LP07 86 - 197 642 - 004 0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LP09 86 - 199 642 - 005 1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LP13 86 - 201 642 - 006 0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LP07 86 - 203 642 - 010 0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LP09 86 - 205 642 - 011 1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LP13 86 - 207 642 - 012 0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LP07 86 - 214 642 - 017 0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LP09 86 - 215 642 - 018 1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LP13 86 - 216 642 - 019 0 1 2 3 Turret with locator for pin and socketr 1.6 mm and 2 mm contacts Male and Female Contacts Shell Size o Contacts AWG Souriau P/N Daniels P/N Astro P/N 1.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030 2 12 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031 1.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038 2 12 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035 2 3 b. If using soldered contacts, prep each wire with flux and then tin dip each exposed wire end. Next pre-load a piece of heat shrink onto the wire (Individual heat shrink tubes are optional). Solder each wire to the solder cup end of the contact. To avoid shorts, make sure that no solder comes in contact with any other contact or wire on the connector. After the contact has been soldered to the wire, check each contact to insure that the contact is securely soldered to the wire. Slide the preloaded heat shrink over the solder joint and shrink into place. Do not over-heat the solder joint area as it can cause the solder to re-flow or it could burn the wire insulation. 5. If inserting removable contacts: a. Starting with the interface end of the contact, carefully insert each contact into the backside of the insulator that has the position loading path indicator (worm) on it. Start with the end of the position loading path indicator (worm) that has the half circle on it (Position #1). Then follow the position loading path indicator (worm) around the insulator. You will go counter clockwise if using a male contact and clockwise if using a female contact (see diagram below for the position loading path indicator (worm) layout). If the connector has center contacts, it is sometimes easier to start at the end of the position loading path indicator (worm) (last position) and work backwards. This is up to the assembler and the process they are using to insert the contacts. Make sure not to bend the contact when inserting it into the insulator. It is extremely important that the contact is completely seated in to the insulator. For the connector to function properly, the contact should click/snap into place when seated. To confirm the seating of the contact, check each contact for proper seating. 238 JKX Plug Assembly Instructions 6. Removal of Contacts: a. Using the proper extraction tool insert the tool over the front of the contact and push contact out. Failure to use the proper extraction tool can result in damage to the contact. Shell Size o Contacts Souriau Part Number Astro Part Number 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 1.6 JBX OUT DC 16 ATJP 2095 2.0 JBX OUT DC 20 ATJP 2115 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 1.6 JBX OUT DC 16 ATJP 2095 2.0 JBX OUT DC 20 ATJP 2115 0 1 2 3 7. Take the keyed half bushing (#9) and place it over the insulator so that the window is lined up with the key on the insulator and the key on the half bushing is pointing to the interface end of the insulator (interface end of connector). Then take the half bushing without the window (#9) and place on the opposite side of the insulator so that both half bushings are aligned with each other. Connector Assembly 8. Take the contact assembly that is mounted on the cable and using the red dot as a reference, align the slot on the inside of the connector (#10) with the keys on the end of the half bushings (you may need to spin the assembly slightly). Insure that the keys are seated properly by turning the insulator and contact assembly. If the assembly does not turn, then the keys are correctly aligned. If the assembly does turn, then you must withdraw the assembly & realign the keys. 239 JKX Plug Assembly Instructions 9. Then push the preloaded taper seat (if a shielded cable is being used, comb out the shielding and fold back over the taperseat) and outer shell into the connector housing and thread the outer shell into the housing until it is hand tight and you can feel the o-ring being compressed. 10. Once the outer shell is installed onto the connector housing, apply thread lock to thread area. Then slide the cable glade (#3) collet (#4) and back nut (#5) up until you can manually start the back nut threads onto the threaded end of the connector housing. Tighten the back nut up as far as you can by hand, then take the appropriate wrenches and place the wrenches onto the "A" & "B" flats located on the connector housing. Do not over torque back nut as it can cause connector failure. (See torque requirements listed below) Size A oB oM 0 47 12 1.5 to 4.5 1 57 15 2 to 6 Coupling Torques Tools (jaw dimensions) Advised torque* in Nm Size 14 x 1 0 0 (Option G) 1 1 (Option G) 1.6 / 1.8 / 1.5 2 2 2.5 8 0.8 0.8 1 1 10 Size 0 16 x 1 0 (Option G) 1 17 19 10 11 11. If the connector requires a protective boot, slide the boot over the lip on the back nut. 240 1 (Option G) 13 12 14 JKX Plug Assembly Instructions Trouble shooting Problem: Cause: Correction: Contact will not seat in connector, contact backing out. Wrong wire or insulation size, wrong strip length, poor crimping, broken clips, damaged insulator, removed contact without proper removal tool, bad crimp. Use correct wire, adjust strip length, strip and recrimp with new contact, replace insulator, using wrong crimp tool, replace contact. Bent solder contact Bent in handling, bent in soldering operation, connector assembled incorrectly. Replace with new insert and/or contacts. Pins and insulator were inserted into electrical test while unprotected by shell Connector will not release from mating part or operate correctly Not using flats on latching sleeve and back nut to torque connector, improper assembly of the connector, over mold material inside connector. Release back nut and re-torque, disassemble and reassemble, replace connector. Over tightened the back nut. Connector will not release from mating part or operate correctly, damage connector. Loosen back nut and retighten. Collet will not grip cable. Loose cable in connector. Check correct collet size is being used. Connector will not assemble. Incorrect alignment of key in connector, half bushings, connector housing, insulator, collet, braid in key slots in collet. Disassemble connector and reassemble connector-aligning keys, relocate braid in collet. Contact stubbing after mating. Bent contact and damaged contact, connectorassembled incorrectly. Re-align contact, replace insert with contacts. Electrical failure. Improper crimping, wrong wire strip length, wire loading incorrect location, poor solder joint. Remove contact with correct removal tool, reinstall new contact, and verify strip length. Leakage of Seals Over torque of nut Disassemble connector and inspect seals 241 JKX Receptacle Assembly Instructions 1. Select the proper JKX receptacle and contact size for the specific cable application by using the contact layout chart as depicted in the Push Pull catalog. 2. Strip the cable/wire to the required strip length. Wiring and Assembly Instructions * Cable stripping for connectors with crimp contacts Stripping for FD/PC Shell Size o Contacts oI L 1.35 >1.35 1.6 >1.6 1.35 >1.35 1.6 >1.6 2.1 >2.1 0.7 0 0.9 0.7 1 0.9 1.3 C T 4 5.5 4 5.5 4 5.5 4 5.5 4 5.5 15 15 17 17 17 7 7 8 8 8 * Cable stripping for connectors with solder contacts Stripping for FD/PC Shell Size 0 o Contacts L S T 0.5 11 2 7 0.7 12 3 7 0.9 12 3 7 0.5 13 2 8 0.7 14 3 8 0.9 14 3 8 1.3 14 3.5 8 1 3. Depending on application and shell type, the nut and washer may be removed before attaching the wires to the contacts. 4. Attach crimped contacts to wires: a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires using the proper crimping tool and locator set on the correct AWG wire size. After the contact has been crimped to the wire, check each contact to insure that the contact is securely crimped. 242 JKX Receptacle Assembly Instructions Crimping Tool Specifications MIL-C-22520 / 7.01 MIL P/N - Souriau P/N Supplier P/N MIL-22520/7-01 Daniels: MH860 Buchanan: 616 336 MIL P/N - Souriau P/N Supplier P/N MIL-22520/1-01 Daniels: AF8 Buchanan: 615 708 Contacts 0.7 mm - 0.9 mm and 1.3 mm Specifications MIL-C-22520 / 1.01 Contacts 1.6 mm and 2 mm Locator Pin and Socket .07-.09 mm and 1.3 mm contacts Shell Size Male Contact o Contacts AWG 0.7 Female Contact Souriau P/N Daniels P/N Astro P/N Souriau P/N Daniels P/N Astro P/N 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LP07 86 - 224 / 0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LP09 86 - 226 / 0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LP07 86 - 197 642 - 004 0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LP09 86 - 199 642 - 005 1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LP13 86 - 201 642 - 006 0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LP07 86 - 203 642 - 010 0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LP09 86 - 205 642 - 011 1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LP13 86 - 207 642 - 012 0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LP07 86 - 214 642 - 017 0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LP09 86 - 215 642 - 018 1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LP13 86 - 216 642 - 019 0 1 2 3 Turret with locator for pin and socketr 1.6 mm and 2 mm contacts Male and Female Contacts Shell Size o Contacts AWG Souriau P/N Daniels P/N Astro P/N 1.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030 2 12 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031 1.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038 2 12 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035 2 3 b. If using clipped solder contacts, prep each wire with flux and then tin dip each exposed wire end. Next pre-load a piece of heat shrink onto the wire (Individual heat shrink tubes are optional). Solder each wire to the solder cup end of the contact. To avoid shorts, make sure that no solder comes in contact with any other contact or wire on the connector. After the contact has been soldered to the wire, check each contact to insure that the contact is securely soldered to the wire. Slide the pre-loaded heat shrink over the solder joint and shrink into place. Do not over-heat the solder joint area as it can cause the solder to re-flow or it could burn the wire insulation. 243 JKX Receptacle Assembly Instructions 5. If inserting terminated contacts: a. Starting with the interface end of the contact, insert each contact into the backside of the insulator that has the position loading path indicator (worm) on it. Start with the end of the position loading path indicator (worm) that has the half circle on it (Position #1). Then follow the position loading path indicator (worm) around the insulator. You will go counter clockwise if using a male contact and clockwise if using a female contact (see diagram below for the position loading path indicator (worm) layout). If the connector has center contacts, it is sometimes easier to start at the end of the position loading path indicator (worm) (last position) and work backwards. This is up to the assembler and the process used to insert the contacts. Make sure not to bend the contact when inserting it into the insulator. It is extremely important that the contact is seated in the insulator for the connector to function properly. The contact should click/snap into place when seated. Check each contact for proper seating. 6. Removal of contacts: a. Using the proper extraction tool (See FIGURE 6.A), insert the tool over the front of the contact and push contact out. Failure to use the proper extraction tool can result in damage to the contact. Shell Size o Contacts Souriau Part Number Astro Part Number 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 1.6 JBX OUT DC 16 ATJP 2095 2.0 JBX OUT DC 20 ATJP 2115 0.7 JBX OUT DC 07 ATJP 2045 0.9 JBX OUT DC 09 ATJP 2057 1.3 JBX OUT DC 13 ATJP 2077 1.6 JBX OUT DC 16 ATJP 2095 2.0 JBX OUT DC 20 ATJP 2115 0 1 2 3 244 JKX Receptacle Assembly Instructions Trouble shooting Problem: Cause: Correction: Contact will not seat in connector, contact backing out. Wrong wire or insulation size, wrong strip length, poor crimping, broken clips, damaged insulator, removed contact without proper removal tool, bad crimp. Use correct wire, adjust strip length, strip and recrimp with new contact, replace insulator, using correct crimp tool, replace contact. Bent solder contact Bent in handling, bent in soldering operation, connector assembled incorrectly. Replace insert with contacts. Contact stubbing after mating. Bent contact and damaged contact, connectorassembled incorrectly. Re-align contact, replace insert with contacts. Electrical failure. Improper crimping, wrong wire strip length, wire loading incorrect location, poor solder joint. Remove contact with correct removal tool, reinstall new contact, and verify strip length. 245 Push Pull Connectors sealed version size 2 Key features * Sealed IP 67 (mated connectors) * Mechanically keyed : ensure correct polarisation and alignment. * Contact arrangements : from 2 to 19 contacts. * Wire gauge range from 26 AWG to 12 AWG. * High contact density in a small space. * Contact termination in either crimp, solder , or PCB contacts. User advantages Wet environment Splash proof IP 67 6-collet cluster Removable contacts Allows a wide range of cable diameter applications for a single connector. Crimp versions allow easier wiring and maintenance. Part number system JBX Basic series FE 2 G 12 M Shell type FE-EC-PE-SE Shell size 2 Keying G Contact layouts 02 ---------- 19 Contact type M : pin Contact termination C : crimp ; S : solder ; P* : straight PCB tails ; Q* : 90 PCB tails Material & surface plating S : Outer shell in brass alloy with chrome over nickel N : Outer shell in brass alloy with black plating (consult Souriau US) F : socket (in relation with keying) D : Obligatory suffix S : Obligatory suffix Option R : Red dot (possible for FE, PE, HH, HHE only) * For receptacles with female contacts only. 246 C S D S R Push Pull Connectors sealed version size 2 Shell type * Available sealed JBX, Size 2 EC : double nut receptacle PE : Cable mounted receptacle FE : Straight plug with cable clamping SE : Fixed receptacle with cable clamping * Dimensions FE : Straight plug EC : Double nut receptacle SE : Cable clamp receptacle PE : Cable mounted receptacle Note 1 : For the plug, the cable clamp receptacle and the free receptacle, a black protective boot is included in the P/N. 247 Push Pull Connectors sealed version size 2 Keying Only G keying is available in standard version (0 keying angle, plugs with pin contacts, receptacles with female contacts) for the different types of shells. Contact layouts * Multi contact inserts Shell size Male insulator Contact viewed from layout wiring side Available Contact types S solder C crimp P* straight Q* 90 PCB tails PCB tails O Contact AWG Solder Crimp wire wire Max. Max. Max. current rating (A) Testing voltage (Vrms) Working voltage (Vdc / Vrms) 02 S C 2 16 12 30 2100 1000/700 03 S C 1.6 18 14 17 1700 830/560 04 S C 1.3 20 18 15 2400 1000/800 05 S C 1.3 20 18 14 1900 900/630 06 S C 1.3 20 18 12 1900 900/630 07 S C 1.3 20 18 11 1500 730/500 08 S C P Q 0.9 24 20 10 1700 830/560 10 S C P Q 0.9 24 20 8 1700 830/560 12 S C P Q 0.7 26 22 7 1700 830/560 16 S C P Q 0.7 26 22 6 1500 730/500 18 S C P 0.7 26 22 5.5 1400 660/460 19 S C P 0.7 26 22 5 1400 660/460 2 Inserts with fixed non removable contacts * For EC receptacles with female contacts. 248 Push Pull Connectors sealed version size 2 Technical characteristics The technical characteristics are the same as for the standard JBX series except the following ones: * Material - Specific additionnal elements Component Material Color Working temperature Seals Nitrile & Silicon rubber O'ring = black plug seal = black - 40C ; + 250C - 58F ; + 482F Protective boot Elastollan (PUR) Black - 40C ; + 80C - 40F ; + 176F * Mechanical and climatics - Specific additional elements Characteristics Values Protection index Operating temperature IP 67 (Splashproof - 1/2 hour under 1 m of water) - 40C ; + 80C - 40F ; + 176F Options * Cap: Part-number = JBX BR2 022 : an efficient protection against water Wiring and assembly instructions * Panel cutout The panel cutout is the same as for the JBX size 2 shells except for the HC (or HCE) type for which it corresponds to the JBX size 3 shells. * Range of cable diameter: from 6 to 9 mm * Operation to add during the plug assembly: Deposit of watertight thread glue between the backnut (A on the drawing p17) and the connection shell (? on the drawing p17). Advised glue = Loctite 542. 249 Sealed Breakaway Connector Souriau JDX Breakaway Connectors Key Features Breakaway design eliminates the need for a manually operated latching system Mates and un-mates quickly and prevents injury to the user or equipment if the cable becomes entangled. Sealed to IP68. Two shell sizes, 2 to 19 positions. Contact termination solder & PCB. Custom cable assemblies. Part Numbering System JDX Basic Series FD 2 Shell Type FD-EP-EZ-PC Shell Size 0-2 Keying T&U Contact Layout Size 0; 2, 3, 4, 5, 6, 7, 8 Size 2; 2, 3, 4, 5, 6, 7, 8, 10, 12, 16, 18, 19 Contact Type M : pin Contact Termination S: solder ; P: PCB Surface Plating N : Outer shell, brass alloy with black chrome over nickel F : socket S : Outer shell, brass alloy with chrome over nickel Orientation Red dot FD & PC are only sold as part of a cable assembly. Contact Souriau for information on custom cable assemblies. 250 T 05 M S N R Sealed Breakaway Connector Size 0 JDX Shell Styles Size 2 EP: Fixed receptacle front panel mounted, fixed flange EP: Fixed receptacle front panel mounted, fixed flange EZ: Straight PCB mounted receptacle EZ: Straight PCB mounted receptacle PC: Straight cable mounted receptacle PC: Straight cable mounted receptacle FD: Straight cable mounted plug FD: Straight cable mounted plug FA: Front panel mounted plug FA: Front panel mounted plug 251 Sealed Breakaway Connector Contact Layouts Shell Size 0 Male Insulator Viewed From Wire Side Contact Layout Solder PCB Contact Diameter mm 02 S P 0.9 24 10 1400 660/460 03 S P 0.9 24 8 1300 600/420 04 S P 0.7 26 7 1400 660/460 05 S P 0.7 26 6.5 800 400/260 06 S P 0.5 30 2.5 680 320/220 07 S P 0.5 30 2.5 680 320/220 08 S P 0.5 30 2.5 680 320/220 02 S 2 16 30 2100 1000/700 03 S 1.6 18 17 1700 830/560 04 S P 1.3 20 15 2400 1000/800 05 S P 1.3 20 14 1900 900/630 06 S P 1.3 20 12 1900 900/630 07 S P 1.3 20 11 1500 730/500 08 S P 0.9 24 10 1700 830/560 10 S P 0.9 24 8 1700 830/560 12 S P 0.7 26 7 1700 830/561 16 S P 0.7 26 6 1500 730/500 18 S P 0.7 26 5.5 1400 660/460 19 S P 0.7 26 5 1400 660/460 Solder Wire MAX Current Test Voltage MAX Rating (Vrms) Working Voltage (Vrms) 2 Non- removable contacts * Voltage Test Procedure - The testing voltage corresponds to the maximum voltage the connector is able to withstand in normal climatic conditions. The value is about 75% of the electrical breakdown voltage. The testing voltage level can be reached several times in connectors life, but never applied for a continuous duration. - The working voltage corresponds to the maximum voltage the connector is able to withstand continuously during its life time, in real environmental conditions, even with high temperature. The value is around 1/3 of the testing voltage. Keying Options Size 0 Size 2 T&U T&U Key T U Plug & Receptacles 252 Sealed Breakaway Connector Size 0 2 A 12.1 15 B 10.6 14.6 Technical Characteristics Surface Treatment (um) Component Material Standard Cr Ni Au Shell Brass C38500/C3600 0.1 - 0.6 5-8 Shell Aluminum, Contact Souriau for Availability & Part Number AISI 7075-T6 0.1 - 0.6 5-8 Nut Brass C38500/C3600 0.1 - 0.6 5-8 Nut Aluminum, Contact Souriau for Availability & Part Number AISI 7075-T6 0.1 - 0.6 5-8 Pin Contact Brass C38500/C3600 3-5 0.5 Socket Contact Copper Nickel CAD C 19150 3-5 0.5 Clip Beryllium Copper 17200 Shielding Ring Copper Alloy (Proprietary -- 3-7 Mechanical, Climatic & Electrical Characteristics Values Standard Method Endurance >2,500 cycles Mil-Std-1344A 2016.1 Insulation resistance ANSI-EIA-364-D 21 ANSI-EIA-364-D 66 ANSI-EIA-364-D 32 Mechanical Shock >500M ohm (60dB min. up to 100MHz) (35dB min. up to 1GHz) - 40 C to + 125 c 5 cycles 300 g, 3ms ANSI-EIA-364-D 27 Vibrations 10 to 2000 HZ y = 15 g Mil-Std-1344A 2005.1 ANSI-EIA-364-D 28, test concision 4 EMI Shielding Thermal Shock Random Vibrations Altitude Immersion Humidity Resistance to Fluids Protection index Operating temperature 3 cycles (3*30min), 3 240 hours @ 40 C 90%RH Kerosene JP8 (NATO code F34) Gasoline ASTM D 4814* Mineral oil NATO code H515 IP68 mated & un-mated - 40 C to + 125 c 5 cycles 253 ANSI-EIA-364-D 31 ANSI-EIA-364-D 10 IEC 529 14.2.8 Sealed Breakaway Connector Solder Contacts2 Contact C F Usable Cables Core Section (mm) AWG Contact Max Current Resistance Rating (A) (m) Endurance # of Cycles 0.5 0.5 min max 28 5 10 >1,000 0.7 0.63 -- 0.3 26 7 5 >1,000 0.9 0.8 -- 0.21 24 10 3.5 >1,000 1.3 1.1 -- 0.6 20 15 3 >1,000 1.6 1.5 -- 0.93 18 17 2.5 >1,000 2 1.9 -- 1.34 16 30 2.5 >1,000 PCB Contacts 0.5 mm female PCB tail length size 0 Dimension "L" 4 mm 0.7 mm female PCB tail length size 0 Dimension "L" 4 mm 0.9 mm female PCB tail length size 0 Dimension "L" 4 mm 0.7 mm female PCB tail length size 2 Dimension "L" 6.0 mm 0.9 mm female PCB tail length size 2 Dimension "L" 6.0mm 1.3 mm female PCB tail length size 2 Dimension "L" 6.0 mm 254 Push-Pull connectors Accessories JBX * Insulating washer 2 washers Nut Part number Shell size OA B L M N T E JBX 00 RIN 00 10 8.8 1.8 1 0.8 8 4.4 JBX 0 RI* 0 12 10.8 1.8 1 0.8 9.9 6.4 JBX 1 RI* 1 16 13.8 1.8 1 0.8 12.2 8.4 JBX 2 RI* 2 21 17.8 2.2 1.2 0.8 16.2 8.2 JBX 3 RI* 3 25 21.8 2.2 1.2 0.8 20.2 10.1 * Washer colors as protective boots. In size 00, available only in black. Material : PA 6/6 Working temperature : - 40C ; + 125C - 40F ; + 257F Receptacle Using 2 washers for receptacle / panel insulating Be careful : usable for the JAX and JBX series but not for sealed connectors (JKX and sealed JBX size 2). * Grounding washer Dimensions Part number Shell size OA OB L N JAX RA 00 251 00 10 7.2 0.3 21.5 JAX RA 0 251 0 13 9.1 0.3 24 JAX RA 1 251 1 16 12.2 0.3 24 JAX RA 2 251 2 21 15.1 0.8 35 JAX RA 3 251 3 25 18.1 0.8 37 OA L N OB Material : - Brass - Nickel plated (3 m) Be careful : usable for the JBX series but not for sealed connectors (JKX and sealed JBX size 2). 255 Push-Pull connectors Accessories JBX * Locking washer Dimensions Part number Shell size OA OB C D JAX RE 00 00 7.3 10 0.5 1 JAX RE 0 0 9.2 12.5 0.6 1 JAX RE 1 1 12.2 16 0.6 1 Piece parts JBX-JKX * Crimp contacts (if ordered separately) Shell size O contact 0 0.9 0.7 1.3 0.9 0.7 2 1.6 1.3 0.9 0.7 2 1.6 1.3 0.9 0.7 1 2 3 * Solder contacts (if ordered separately) Shell size O contact 0 0.9 1.3 0.9 2 1.6 1.3 0.9 2 1.6 1.3 0.9 1 2 3 Part Number Crimp pin Crimp socket JBX 0 CT MC 09 JBX 0 CT FC 09 JBX 0 CT MC 07 JBX 0 CT FC 07 JBX 1 CT MC 13 JBX 1 CT FC 13 JBX 1 CT MC 09 JBX 1 CT FC 09 JBX 1 CT MC 07 JBX 1 CT FC 07 JBX 2 CT MC 20 JBX 2 CT FC 20 JBX 2 CT MC 16 JBX 2 CT FC 16 JBX 2 CT MC 13 JBX 2 CT FC 13 JBX 2 CT MC 09 JBX 2 CT FC 09 JBX 2 CT MC 07 JBX 2 CT FC 07 JBX 3 CT FC 20 JBX 3 CT MC 20 JBX 3 CT MC 16 JBX 3 CT FC 16 JBX 3 CT MC 13 JBX 3 CT FC 13 JBX 3 CT FC 09 JBX 3 CT MC 09 JBX 3 CT MC 07 JBX 3 CT FC 07 Part Number Solder socket Solder pin JBX 0 CT MS 09 JBX 0 CT FS 09 JBX 1 CT MS 13 JBX 1 CT FS 13 JBX 1 CT MS 09 JBX 1 CT FS 09 JBX 2 CT MS 20 JBX 2 CT FS 20 JBX 2 CT MS 16 JBX 2 CT FS 16 JBX 2 CT MS 13 JBX 2 CT FS 13 JBX 2 CT MS 09 JBX 2 CT FS 09 JBX 3 CT MS 20 JBX 3 CT FS 20 JBX 3 CT MS 16 JBX 3 CT FS 16 JBX 3 CT MS 13 JBX 3 CT FS 13 JBX 3 CT MS 09 JBX 3 CT FS 09 Solder contacts of 0.5 mm and 0.7 mm of diameter not available separately (always fixed into the insulator). 256 Push-Pull connectors Piece parts JBX-JKX * Inserts for removable solder and crimp contacts Shell size 0 1 2 3 Insert 02 03 04 05 02 03 04 05 06 07 08 02 03 04 05 06 07 08 10 12 16 18 19 03 04 07 10 14 18 22 30 Insert Part Number Pin contacts Socket contacts JBX 0 BI 02 MS JBX 0 BI 02 FS JBX 0 BI 03 MS JBX 0 BI 03 FS JBX 0 BI 04 MS JBX 0 BI 04 FS JBX 0 BI 05 MS JBX 0 BI 05 FS JBX 1 BI 02 MS JBX 1 BI 02 FS JBX 1 BI 03 MS JBX 1 BI 03 FS JBX 1 BI 04 MS JBX 1 BI 04 FS JBX 1 BI 05 MS JBX 1 BI 05 FS JBX 1 BI 06 MS JBX 1 BI 06 FS JBX 1 BI 07 MS JBX 1 BI 07 FS JBX 1 BI 08 MS JBX 1 BI 08 FS JBX 2 BI 02 MS JBX 2 BI 02 FS JBX 2 BI 03 MS JBX 2 BI 03 FS JBX 2 BI 04 MS JBX 2 BI 04 FS JBX 2 BI 05 MS JBX 2 BI 05 FS JBX 2 BI 06 MS JBX 2 BI 06 FS JBX 2 BI 07 MS JBX 2 BI 07 FS JBX 2 BI 08 MS JBX 2 BI 08 FS JBX 2 BI 10 MS JBX 2 BI 10 FS JBX 2 BI 12 MS JBX 2 BI 12 FS JBX 2 BI 16 MS JBX 2 BI 16 FS JBX 2 BI 18 MS JBX 2 BI 18 FS JBX 2 BI 19 MS JBX 2 BI 19 FS JBX 3 BI 03 MS JBX 3 BI 03 FS JBX 3 BI 04 MS JBX 3 BI 04 FS JBX 3 BI 07 MS JBX 3 BI 07 FS JBX 3 BI 10 MS JBX 3 BI 10 FS JBX 3 BI 14 MS JBX 3 BI 14 FS JBX 3 BI 18 MS JBX 3 BI 18 FS JBX 3 BI 22 MS JBX 3 BI 22 FS JBX 3 BI 30 MS JBX 3 BI 30 FS * Inserts with fixed solder contacts Shell size Insert 00 04 04 05 06 07 07 08 10 12 16 18 19 22 30 0 1 2 3 (if ordered separately) Insert for pin contacts Insert for socket contacts (if ordered separately) Insert Part Number Pin contacts Socket contacts JBX 00 BI 04 MPS JBX 0 BI 04 MSS JBX 0 BI 05 MSS JBX 0 BI 06 MPS JBX 0 BI 07 MPS JBX 1 BI 07 MSS JBX 1 BI 08 MSS JBX 1 BI 10 MPS JBX 2 BI 12 MSS JBX 2 BI 16 MSS JBX 2 BI 18 MSS JBX 2 BI 19 MSS JBX 3 BI 22 MSS JBX 3 BI 30 MSS JBX 00 BI 04 FPS JBX 0 BI 04 FSS JBX 0 BI 05 FSS JBX 0 BI 06 FPS JBX 0 BI 07 FPS JBX 1 BI 07 FSS JBX 1 BI 08 FSS JBX 1 BI 10 FPS JBX 2 BI 12 FSS JBX 2 BI 16 FSS JBX 2 BI 18 FSS JBX 2 BI 19 FSS JBX 3 BI 22 FSS JBX 3 BI 30 FSS 257 Insert for pin contacts Insert for socket contacts Push-Pull connectors Toolings JBX - JKX * Manual extraction tools Contacts automatically extracted The extraction tool is similar for both male and female contacts. Shell size O Contacts 0.7 0.9 0.7 0.9 0 1 2 3 The contact is automatically extracted without the need of pulling onto the cable. 258 SOURIAU Part number ASTRO Part number JBX OUT DC 07 ATJP 2045 JBX OUT DC 09 ATJP 2057 JBX OUT DC 07 ATJP2045 JBX OUT DC 09 ATJP 2057 1.3 0.7 0.9 1.3 1.6 2.0 0.7 JBX OUT DC 13 JBX OUT DC 07 JBX OUT DC 09 JBX OUT DC 13 JBX OUT DC 16 JBX OUT DC 20 JBX OUT DC 07 ATJP 2077 ATJP 2045 ATJP 2057 ATJP 2077 ATJP 2095 ATJP 2115 ATJP 2045 0.9 1.3 1.6 2.0 JBX OUT DC 09 JBX OUT DC 13 JBX OUT DC 16 JBX OUT DC 20 ATJP 2057 ATJP 2077 ATJP 2095 ATJP 2115 Push-Pull connectors Toolings JBX - JKX * Crimping tool Specifications MIL-C-22520 / 7.01 MIL P/N - SOURIAU P/N Supplier P/N MIL-22520/7-01 Daniels : MH860 Buchanan : 616 336 MIL P/N - SOURIAU P/N Supplier P/N MIL-22520/1-01 Daniels : AF8 Buchanan : 615 708 Contacts 0.7 mm - 0.9 mm and 1.3 mm Specifications MIL-C-22520 / 1.01 Contacts 1.6 mm and 2 mm * Locator for pin and socket 0.7 - 0.9 mm and 1.3 mm contacts Shell size 0 1 2 3 O contacts AWG 0.7 0.9 0.7 0.9 1.3 0.7 0.9 1.3 0.7 0.9 1.3 22 - 24 - 26 20 - 22 - 24 22 - 24 - 26 20 - 22 - 24 18 - 20 - 22 22 - 24 - 26 20 - 22 - 24 18 - 20 - 22 22 - 24 - 26 20 - 22 - 24 18 - 20 - 22 Male contact SOURIAU P/N DANIELS P/N JBX 0 OUT LP07 86 - 223 JBX 0 OUT LP09 86 - 225 86 - 196 JBX 1 OUT LP07 JBX 1 OUT LP09 86 - 198 86 - 200 JBX 1 OUT LP13 JBX 2 OUT LP07 86 - 202 JBX 2 OUT LP09 86 - 204 JBX 2 OUT LP13 86 - 206 JBX 3 OUT LP07 86 - 217 JBX 3 OUT LP09 86 - 218 JBX 3 OUT LP13 86 - 219 ASTRO P/N / / 642 - 001 642 - 002 642 - 003 642 - 007 642 - 008 642 - 009 642 - 014 642 - 015 642 - 016 Female contact SOURIAU P/N DANIELS P/N JBX 0 OUT LS07 86 - 224 JBX 0 OUT LS09 86 - 226 JBX 1 OUT LS07 86 - 197 JBX 1 OUT LS09 86 - 199 JBX 1 OUT LS13 86 - 201 JBX 2 OUT LS07 86 - 203 JBX 2 OUT LS09 86 - 205 JBX 2 OUT LS13 86 - 207 JBX 3 OUT LS07 86 - 214 JBX 3 OUT LS09 86 - 215 JBX 3 OUT LS13 86 - 216 ASTRO P/N / / 642 - 004 642 - 005 642 - 006 642 - 010 642 - 011 642 - 012 642 - 017 642 - 018 642 - 019 * Turret with locator for pin and socket 1.6 mm and 2 mm contacts Shell size 2 3 O contacts AWG 1.6 2 1.6 2 14 - 16 - 18 12 - 14 - 16 14 - 16 - 18 12 - 14 - 16 259 Male and female contacts SOURIAU P/N DANIELS P/N ASTRO P/N JBX 2 OUT LT16 TH 564 650 - 030 TH 565 650 - 031 JBX 2 OUT LT20 JBX 3 OUT LT16 TH 566 650 - 038 650 - 035 TH 567 JBX 3 OUT LT20 Custom Connector and Cable Assemblies Examples of custom designs derivated from standard connectors lines * Watertight receptacles * JBX series, Custom Receptacle Design * Black conductive plating * JKX series, black chrome plating 260 Push-Pull connectors Request form please fill in and fax to SOURIAU - Customer service (see the address page for your local contact) Name : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel number : . . . . . . . . . . . . . . . . Fax number : . . . . . . . . . . . Title : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-mail : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Company : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Address : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications : o Medical o GPS o Audio o Transportation o Video o Metrology o Instrumentation o Nuclear physics o Other ............................................................. Detailed description of end product, unit or application ....................................................................................... Connector description : o Series : . . . . . . . . . . . . . . . . . . . . . . . . . . o Shell configuration : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Shell size : . . . . . . . . . . . . . . . . . . . . . . o Protective boot : . . . . . . . . . . . . . . . . . . . . . . o Color : . . . . . . . . . . . . . . . . o Number of contacts : . . . . . . . . . . . . . . . o Type of contacts : o Solder . . . . . . . . . . o Crimp . . . . . . o Printed circuit . . . . . . . . . . . o 90 printed circuit o Conductor AWG : . . . . . . . . . . . . . . . . . . o Coax type : . . . . . . . . . . . . . . . . . . . . . . . . . o Other : . . . . . . . . . . . . . . . Electrical : o Working voltage (AC/DC) : . . . . . . . . . . . o Current rating : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Impedance (Ohms) : . . . . . . . . . . . . . . . . o SWR : . . . . . . . . . . . . . . . . . . . . . . . . .o Frequency . . . . . . . . . . . . . . . . . . o Contact resistance : . . . . . . . . . . . . . . . . . o Shielding : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Fibre optics : o Multimode . . . . . . . . . . . . . . . . . . . . . . . . o Monomode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Environment : o Temperature : . . . . . . . . . . . . . . . . . . . . . o Protection index (IP -- ) : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Outside environment : o Clear . . . . . . . . . . . . . . . . o Splash proof . . . . . . . . . . . . . . . . . . . .o Sterilization . . . . . . . . . . . . . . . . . o Dirt . . . . . . . . . . . . . . . . . o Fluids . . . . . . . . . . . . . . . . . . . . . . . . .o Radiation . . . . . . . . . . . . . . . . . . . o Chemicals . . . . . . . . . . . . o Waterproof . . . . . . . . . . . . . . . . . . . . .o Gases . . . . . . . . . . . . . . . . . . . . . o Salt waterspray. . . . . . . . Projections : o Prototype quantity : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Delivery date : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Preseries quantity : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Delivery date : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Production quantity : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Delivery date : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Production per year : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Number of years : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Target pricing per connector : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 Push-Pull connectors Conversion Table * Millimeters / Inches * C/F (mm) (inches) (mm) (inches) (mm) (inches) (C) (F) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 6.6 6.8 7.0 7.2 7.4 7.6 7.8 8.0 0.00394 0.00788 0.01182 0.01576 0.01970 0.02364 0.02758 0.03152 0.03546 0.03940 0.04334 0.04728 0.05122 0.05516 0.05910 0.06304 0.06698 0.07092 0.07486 0.07880 0.08274 0.08668 0.09062 0.09456 0.09850 0.10244 0.10638 0.11032 0.11426 0.11820 0.12214 0.12608 0.13002 0.13396 0.13790 0.14184 0.14578 0.14972 0.15366 0.15760 0.16154 0.16548 0.16942 0.17336 0.17730 0.18124 0.18518 0.18912 0.19306 0.19700 0.20488 0.21276 0.22064 0.22852 0.23640 0.24428 0.25216 0.26004 0.26792 0.27580 0.28368 0.29156 0.29944 0.30732 0.31520 8.2 8.4 8.6 8.8 9.0 9.2 9.4 9.6 9.8 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0 24.5 25.0 25.5 26.0 26.5 27.0 27.5 28.0 28.5 29.0 29.5 30.0 30.5 31.0 31.5 32.0 32.5 33.0 33.5 34.0 34.5 35.0 35.5 36.0 36.5 37.0 37.5 0.32308 0.33096 0.33884 0.34672 0.35460 0.36248 0.37036 0.37824 0.38612 0.39400 0.41370 0.43340 0.45310 0.47280 0.49250 0.51220 0.53190 0.55160 0.57130 0.59100 0.61070 0.63040 0.65010 0.66980 0.68950 0.70920 0.72890 0.74860 0.76830 0.78800 0.80770 0.82740 0.84710 0.86680 0.88650 0.90620 0.92590 0.94560 0.96530 0.98500 1.00470 1.02440 1.04410 1.06380 1.08350 1.10320 1.12290 1.14260 1.16230 1.18200 1.20170 1.22140 1.24110 1.26080 1.28050 1.30020 1.31990 1.33960 1.35930 1.37900 1.39870 1.41840 1.43810 1.45780 1.47750 38.0 38.5 39.0 39.5 40.0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 44.0 44.5 45.0 45.5 46.0 46.5 47.0 47.5 48.0 48.5 49.0 49.5 50.0 51.0 52.0 53.0 54.0 55.0 56.0 57.0 58.0 59.0 60.0 61.0 62.0 63.0 64.0 65.0 66.0 67.0 68.0 69.0 70.0 71.0 72.0 73.0 74.0 75.0 80.0 85.0 90.0 100.0 200.0 400.0 600.0 800.0 1000.0 1200.0 1600.0 2000.0 3200.0 1.49720 1.51690 1.53660 1.55630 1.57600 1.59570 1.61540 1.63510 1.65480 1.67450 1.69420 1.71390 1.73360 1.75330 1.77300 1.79270 1.81240 1.83210 1.85180 1.87150 1.89120 1.91090 1.93060 1.95030 1.97000 2.00940 2.04880 2.08820 2.12760 2.16700 2.20640 2.24580 2.28520 2.32460 2.36400 2.40340 2.44280 2.48220 2.52160 2.56100 2.60040 2.63980 2.67920 2.71860 2.75800 2.79740 2.83680 2.87620 2.91560 2.95500 3.15200 3.34900 3.54600 3.94000 7.88000 15.76000 23.64000 31.52000 39.40000 47.28000 63.04000 78.80000 126.08000 - 70 - 65 - 55 - 50 - 40 0 37 80 125 150 170 200 250 - 94 - 85 - 67 - 58 - 40 32 98.6 176 257 302 338 392 482 262 * Pressure conversion bar 10 5 2 1 0.5 0.1 psi 145.0 72.5 29.0 14.5 7.2 1.4 mmHg (torr) 7600 3800 1520 760 380 76 mbar 100 50 10 1.32 psi 1.4 0.72 0.14 0.019 torr (mmHg) 76 38 7.6 1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Souriau: UT01103W3SH6 82911684ZX 82911685NZX RM12Z43D28 S3D1 MSG59PL21