1
COMPANY PROFILE
SOURIAU is a world-leading supplier of high
performance interconnect solutions for
severe environments.
The company designs, manufactures and
markets standard electrical, fi ber optic
connectors and complex interconnect
systems. SOURIAU was established in 1917
and has the industrial, aeronautical, defense
and space activities of SOURIAU, JUPITER
and BURNDY.
The dedicated end markets for the
company’s products are aerospace,
defense, railways and industrial markets.
The group’s products are engineered
and manufactured in USA and Dominican
Republic, Europe and Morocco, India and
Japan, and sold by a worldwide sales and
marketing organization. The group employs
1400 people all over the world.
Laboratory & test center
SOURIAU has its own independent test
center recognized by many National
Standard Laboratories.
This center carries-out validation or
qualifi cation programs complying with : MIL-
Standard – CECC – GSFC – VDE – SCC –EN
– CSA – UL –
The laboratory has the capabilities to
perform testing in compliance with the
above mentioned standards as follow :
electrical, environmental, mechanical.
Design & Development
SOURIAU continues its strong commitment
to invest in design and development to
provide innovative solutions.
Our company is structured into cross
functional teams of scientists, engineers and
technicians working closely with customers
to bring new products to market.
More than 6% of our sales are invested in
new product development.
Quality Assurance
Quality is a key objective for SOURIAU
focusing on :
Total customer satisfaction
The widespread application of a Quality
Assurance System that spans all processes,
is consistent throughout the company
and meets the requirements ISO9001 /
ISO14001 / MIL-STD790 / NATO AQAP110 /
BOEING D1-9001 / AS-9100
Souriau reserves the right to make any
engineering refi nements, alterations or
improvements deemed necessary on its
products. The dimensions appearing in
this catalogue are thus subject to change
without notice. When dimensions are critical
detailed drawings should be requested.
Page
• Trim Trio ......................................................................................................................................... 5
• 26482 Series 1 ................................................................................................................... 165
• Push Pull ................................................................................................................................... 197
Commercial and
Industrial Product Catalog
Trim Trio
26482 Series 1
Push Pull
2
19 17 Mr SOURIAU creates a small company with about 20 employees based in 5,000 sq. ft building dedicated to repairing automotive magneto’s.
1924 Burn DIBNER forms BURNDY Engineering Company and revolutionizes overhead power distribution market with T Connectors and bar taps.
1935 First development and production of SOURIAU electrical connector lines.
19 7 8 BURNDY opens York (PA) facility to produce TRIM-TRIO and stamped and formed terminals.
1989 Acquisition of SOURIAU/JUPITER and BURNDY Corp. by FRAMATOME with creation of FCI.
1998 Création within FCI of an autonomous Division (MAI) - Military/Aerospace and Industrial integrating:
SOURIAU: Aerospace and industrial connectors
JUPITER: Marine and heavy industry connectors
BURNDY: Industrial TRIM TRIO range and proprietary aerospace connectors
2003 AXA Private Equity together with the Management acquire MAI Division of FCI.
1917 19551935 1977 1989
1946
Creation of SOURIAU
Creation of Military-Aerospace
and Industrial Division
(MAI) in FCI.
Creation of JUPITER
Set up European UnitsFirst Connectors Set up US Subsidiary Acquisition by FRAMATOME SOURIAU
1998
2003
Main Dates
Creation of BURNDY
SOURIAU
JUPITER
BURNDY
1917 1935 1955 1977 1989 2003
1998
1946
1924
1924
York (PA) facility
1978
1978
Laboratory & Test Center
SOURIAU has its own independent test center recognized by many
National Standard Laboratories.
This Center carries-out validation or qualification programs
complying with :
MIL- Standard - CECC - GSFC - VDE - SCC - EN - CSA - UL -
The laboratory has the capabilities to perform testing in compliance with the
above mentioned standards as follows :
• electrical • environmental • mechanical
Design & Development
SOURIAU continues its strong commitment to
invest in design and development to provide
innovative solutions.
Our Company is structured into cross-functional
teams of scientists, engineers and technicians
working closely with customers to bring new
products to market.
More than 6% of our sales are invested in new
product development.
Quality Assurance
MRP II, Class A
Quality is a key objective for SOURIAU focusing on :
• Total Customer Satisfaction.
• The widespread application of a Quality Assurance
system that spans all processes, is consistent throughout
the company and meets the requirements of ISO 9001/
ISO 14001/MIL-STD 790 /NATO AQAP 110 /
BOEING D1-9000 / AS-9100
History
Commercial and Industrial Product Catalog
3
An International Presence
A local presence in each of
our markets with highly
trained sales engineers
working closely with each
customer.
Standard-MIL and TRIM-TRIO
connectors are available
through a worldwide
distribution network.
▲
▲
Europe
Sarthe, France
Located 120 miles west of Paris, 2 units are
responsible for all standard Mil-Aero and
Industrial product lines.
Tangier, Morocco
Assembly plant serving the European market.
North America
York, PA USA
Located in YORK (PA), is dedicated to
Aerospace, Industrial and R/F
connectors
Santiago, Dominican Republic
Assembly plant serving the North
American market.
Japan
Tokyo, Japan
located in Tokyo, is responsible for industrial products,
particularly for
railways
and machine
tool markets.
Marolles en Brie, France
Located 20 miles south
of Paris this unit is
responsible for very
severe environment
connectors and
systems.
Champagné plant
Dominican Republic plant
Marolles plant
Morocco plant
York plant
Tokyo office
Each Business Unit has full responsibility for design and production of its product lines, providing improved reactivity and commitment to
our customers.
SOURIAU Office
Distributor
Agent/Rep
Operations
Commercial and Industrial Product Catalog
4
TRIM TRIOTM Connectors
5
6
Page
• Overview 9
• Circular connectors
Circular overview ....................................................................................................................................15
Full plastic sealed connectors - UTS ................................................................................................19
Full plastic circular connector - UTP ............................................................................................... 31
Plastic connector with metal coupling system - UTG ...............................................................35
Metal circular connector - UTO ..........................................................................................................39
Metal circular connector - high density - UTOW .........................................................................45
Shielded connectors... how to assemble ....................................................................................... 51
Ruggedized Reverse Bayonet Connector .......................................................................................53
Mixed power signal versions etc… ...................................................................................................69
Circular accessories ...............................................................................................................................75
High mating cycle plastic circular connector - MBG ..................................................................83
• Rectangular connectors
High performance cable connectors - MSM .................................................................................89
High performance boardmount connectors - MSO ...................................................................95
V.35 - DTE/DCE interface connectors ......................................................................................... 101
Low profi le lever locking connectors - MSG ............................................................................. 107
Robust lever locking connectors - MB .........................................................................................113
Full plastic cable and boardmount connectors - SMS ............................................................115
Mixed power signal versions etc… ................................................................................................131
• Contacts
Machined size 16 contacts - RM/RC-M ...................................................................................... 137
Stamped and formed size 16 contacts - SM/SC-M .................................................................141
Coax size 16 contacts - RMDX/RCDX ..........................................................................................147
Fibre optic size 16 contacts - 8012 .............................................................................................. 150
Size 20 contacts for UTOW/UTS ................................................................................................... 152
Power contacts - 8291 ...................................................................................................................... 154
• Accessories
Discrimination keys for size 16 connectors................................................................................ 156
• Tooling
Crimp and extraction tooling ........................................................................................................... 158
Commercial and
Industrial Product Catalog
7
New UT0 – UT0W series:
• The exclusive new product range in the TRIM TRIO broadline.
• Aesthetic and top class performances
UT0 – UT0W series major technical features & benefits
For detailed information on UT0 and UT0W series offering see pages 21 to 31
• Full metal bayonet connector
– Enabling 500 mating-unmating without wear out
– Secure locking device: audible “click” when mating
• In accordance with following standards
– UT0 is Ethernet Cat5e compatible (consult factory)
– UTO-UTOW ranges are upgradeable to highspeed solutions
• RoHS compliant
– Cadmium and lead free materials are used
• High salt spray resistance*
– Can be used in severe environment
* Exists in 48 and 96 hours salt spray version
* Higher salt spray resistance (e.g. 200 or 500 hours) upon request
• Dynamic IP68*
Connector will remain IP68 even when:
– Pulling on the cable
– Bending the cable
* With appropriate back shell
* Exists also in IP67 version
• Dynamic IP69K*
Connector withstands high pressure water
cleaning.
* With appropriate back shell
New UT0-UT0W series
8
New UTV ruggedized series
New UTV series:
• The ruggedized product range in the TRIM TRIO broadline.
• Using size 16 signal and size 12 & 8 power contacts for up to
30 Amps per contact.
UTV series major technical features & benefits
For detailed information on UTV series offering see pages 122 to 139
• Ruggedized full metal reverse bayonet connector
– Enabling 500 mating-unmating without wear out
– Secure locking device
Audible “click” when mating
Visible yellow dot to indicate end of mating cycle
• In accordance with following standards
– Completely intermountable with VG95234: the MS5015 reverse bayonet connectors
• Cadmium and lead free materials are used
• Up to 500 hours salt spray resistance
– Can be used in very severe environment
• Dynamic IP68*
Connector will remain IP68 even when:
– Pulling on the cable
– Bending the cable
* With appropriate back shell and grommet
* Exists also in IP67 version
• Dynamic IP69K*
Connector withstands high pressure water
cleaning.
* With appropriate back shell and grommet
9
TRIM TRIOTM Overview
TRIM TRIO ➲ The flagship of Souriau’s industrial connectors
Historically, TRIM TRIO connectors were developed in the 60’s and are derived from MIL standards, but using size 16 contacts (1.6mm).
From the 60’s and forward, the product ranges have evolved into various sub series and different design-variations.
In parallel with the size 16 contacts, there also has been an evolution on high density versions using size 20 contacts (1.0mm) and on
mixed signal / power versions using size 16 contacts in combination with size 12 (2.4mm) and size 8 (3.6)mm contacts.
This TRIM TRIO interconnection system catalog gives an overview of the following products:
• Standard TRIM TRIO using size 16 contacts (1.6mm)
• High Density TRIM TRIO using size 20 contacts (1.0mm)
• Mixed power / signal versions and Heavy Duty connectors
• Standard TRIM TRIO
Using size 16 contacts
Standard TRIM TRIO using size 16 contacts
(1.6mm pin diameter) is a versatile industrial
range of connectors in which a variety of 3
removable snap-lock contact styles can be
mixed and matched.
From machined or stamped & formed wire
contacts to coaxial or fiber solutions can be
offered with our TRIO of contact styles. In fact,
the beauty of the standard TRIM TRIO system
means that any TRIM TRIO contact can be
used in any contact position in any TRIM TRIO
connector.
The versatile range offers many options in
rectangular and circular connectors from low
cost plastic to top class metal solutions.
This interchangeability offers boundless
design possibilities with a large commonality
throughout the entire range.
The commonality in the system is established
in:
• Contact performance and wire range.
• Configuration of contact cavities in the
housings.
• Crimp tooling
• Assembly procedures.
• Quality assurance procedures.
• Field service and maintenance.
• Personnel training.
• High Density TRIM TRIO
Using size 20 contacts
High Density TRIM TRIO (UT0W/UTS) using
size 20 contacts (1.0mm pin diameter) are
metal circular ranges with bayonet coupling
system in which a variety of 2 removable snap-
lock contact styles are used.
Both machined or stamped & formed contacts
can be mixed and matched in the same
housing.
UTOW receptacle connectors feature the same
panel cut-out dimensions as the
MIL-C-26482 series 1 connectors.
There are 3 basic reasons for a customer to
use UT0W/UTS connectors.
• Higher contact density: allows weight
and space savings
• The “best in class” performance
characteristics with an IP68/ 69K
waterproof bayonet connection
• Cost saving!!! Not only on individual
connector cost, but UT0W/UTS offers
reeled, stamped & formed contacts
that provide the ultimate answer to
customers for overall applied cost for
installation.
• Mixed Power / Signal TRIM
TRIO
• Ruggedized TRIM TRIO
connectors UTV
Mixed Power / Signal TRIM TRIO connectors
using mixed contacts for power versions up
till 44 Amp is a range of connectors to meet
application specific requirements. It is an
extension of the long established and popular
TRIM TRIO connectors offering additional
features.
Ruggedized UTV circular connectors series
is an enhanced version of the VG 95234
connector standard but remains completely
intermountable with VG 95234: the MS 5015
reverse bayonet system.
Following TRIM TRIO contacts are used in the
UTV series:
• Size 16 contacts (1.6mm)
• Size 12 contacts (2.4mm)
• Size 8 contacts (3.6mm)
The keyword in the TRIM TRIO interconnection system is SERV:
• Standardization
• Economy.
• Reliability
• Versatility
This word explain why the TRIM TRIO name is so well known, and its connectors are used all over the world.
The physical characteristics and performances are appreciated in numerous fields of applications:
• Test and measurement
• Robotics
• Process control, handling equipment
• Factory automation and motor drives
• Public transportation, traffic control
• Medical instrumentation, telecom
• … etc
More then ever before, businesses are relying on robust and environmental TRIM TRIO solutions to help them being successful.
The flagship TRIM TRIO has an international presence with engineering; customer service and a worldwide distribution network. It is supported by highly
trained sales engineers working closely with each customer. Our emphasis includes customer satisfaction and ‘just-in-time’ to ensure fast delivery to our key
customers.
TRIM TRIO continues its strong commitment to invest in design and development. We provide new solutions to perform faster, easier, safer and more reliably.
10
Overview - Circular size 16
FULL PLASTIC CIRCULAR
CONNECTOR
Description
Full plastic circular connector with rugged plastic
bayonet coupling system
Range
Shell sizes: 8
Contact arrangements: 10 (3 to 48)
Features
Derived from MIL - C 26482
Intermateable with UTO / UTG
IP65 (waterprotected version)
Min 250 matings/unmatings
2 VDE versions
Accessories
Different type of cable clamps
Dustcaps
Discrimination pins
PLASTIC CONNECTOR WITH
METAL COUPLING
Description
Plastic circular connector with metal bayonet
coupling system
Range
Shell sizes: 8
Contact arrangements: 11 (3 to 48)
Features
Derived from MIL - C 26482
Intermateable with UTO / UTP
IP65 (waterprotected version)
Min 500 matings/unmatings
3 VDE versions
Accessories
Different types of cable clamps
Dustcaps
Discrimination pins
METAL CIRCULAR
CONNECTOR
Description
Metal circular connector with metal bayonet
coupling system
Range
Shell sizes: 8
Contact arrangements: 8 (4 to 48)
Features (see also page 2)
Derived from MIL - C 26482
Intermateable with UTG / UTP
2 levels of water protection:
Dynamic IP67/IP69K and IP68/IP69K
Suitable for EMC requirements
Min 500 matings/unmatings
2 levels of salt spray: 48 and 96h
Higher salt spray (200/500h) upon request
Cat5e ethernet compatible
Back shells with metric cable glands
RoHS compliant
Accessories
Different types of cable clamps
Shielded cable clamp
Dustcaps
Discrimination pins
HIGH MATING CYCLE
CONNECTOR
Description
Plastic circular connector with metal quick mating
feature (push-pull)
Range
Shell sizes: 5
Contact arrangements: 5 (4 to 46)
Features
Min 5000 matings/unmatings
Quick and easy mating with latching system
Accessories
Cable clamp
new
PLASTIC SEALED CONNECTOR
Description
Plastic circular connector with environmental
sealing
Range
Shell Size: 3
Contact arrangements: 9 (3 to19)
Features
Sealed to IP 68/69K
Min 250 mating/unmatings
Jamnut receptacle for efficient panel seal
RoHS compliant
Accessories
Color coded rings for cable identification
Sealing caps
new
11
Overview - Rectangular size 16
HIGH PERFORMANCE CABLE
CONNECTOR
HIGH PERFORMANCE
BOARDMOUNT CONNECTOR
V35 - DTE/DCE
Description
High performance rectangular cable connector
Range
Shell sizes: 9
Contact arrangements: 9 to 75
Features
Per MIL - C 28748
Intermateable with MSO
Accessories
Different types of cable clamps
Guide and jackscrew pins
Pin protection shrouds
Discrimination pins
Description
Rectangular boardmount connector to mate with
MS-M cable connectors
Range
Shell sizes: 5
Contact arrangements: 5 straight (9 to 75)
3 right angle
(9,18,34)
Features
Solid machined or stamped and formed contacts
Intermateable with MS-M
Accessories
Guide and jackscrew pins
Discrimination pins
Description
Rectangular cable and boardmount connector for
V.35 DTE/DCE interface applications
Range
1 shell size with 34 contact positions
straight and right angle boardmount connector
Features
In compliance with international standards of ISO
2593 for TSS V.35 interfacing
Solid machined or stamped and formed contacts
for boardmount connector
Shielded cable and boardmount connectors
available
Accessories
Different type of cable clamps (incl. shielded)
Guide and jackscrew pins
Pin protection shrouds and discrimination pins
PLASTIC PANEL AND CABLE
CONNECTOR
PLASTIC PC BOARDMOUNT
CONNECTOR
Description
Low cost rectangular cable connectors for cable
to cable and cable to panel applications
Range
Shell sizes: 10
Contact arrangements: 10 (2 to 36)
Features
Intermateable with SMS Boardmount
Moulded-on cable hood
No extra hardware required
Positive locking with retaining latches
Disrrimination cavities in between contact cavities
Accessories
Pin protection shrouds
Discrimination pins
Tie wraps
Description
Low cost rectangular boardmount connector to
mate with SMS cable connectors
Range
Shell sizes: 10
Contact arrangements: 10 straight (2 to 36)
4 right angle
(3,6,12,18)
Features
Solid machined or stamped and formed contacts
No extra hardware required
Intermateable with SMS cable connectors
Disrrimination cavities in between contact cavities
Accessories
Discrimination pins
COMPOSITE LEVER-LOCKING
CONNECTOR
Description
Cable (MSG + MB) and boardmount (MSG)
connectors with lever locking system.
Range
Shell sizes: 1 for MSG
1 for MB
Contact arrangements: 50 + 59 for MSG
52 for MB
Features
Lever locking system – easy mating
MSG is 19” rack mountable
Polarization features available
Anti jack knife system on MB
new
12
Overview - Contacts size 16
SCREW MACHINED (size 16)
Description
Machined Snap in pin and socket contacts for
heavy duty top performance requirements.
Range
30 to 14 AWG – 0.05 to 2.5 mm2
Crimp, PC Boardmount, Handsolder
Wire wrap, Grounding contacts
Features
Current rating: 13 Amps
Plating: Gold or Tin
Colour coded for different wire sizes
STAMPED & FORMED (size 16)
Description
Two piece strip formed snap in pin and socket
contacts.
Range
26 to 14 AWG – 0.13 to 2.0 mm2
Crimp.
Features
Current rating: 13 Amps
Plating: Gold or Tin
COAXIAL (size 16)
Description
Snap in pin and socket coaxial contacts for a wide
range of coaxial and twisted pair cables.
Range
Multi piece or Monocrimp design.
Typical coaxial cables are: RG161, RG178, RG179.
RG188.
Features
Plating: Gold
Fiber optic (size 16)
Description
Snap in pin and socket Fiber optic contacts for the
integration of optical links.
Range
Plastic optical Fiber (POF):
1mm core and 2.2mm jacket.
Plastic clad Fiber (PCF):
230 µm core and 2.2 mm jacket
Multimode Silica Fiber:
50/125 µm type 1.5mm (or 900 µm) jacket.
Features
Socket contact is spring loaded to avoid any air
gap between the optical faces.
13
Overview - size 20 connectors + contacts
SCREW MACHINED
CONTACTS (size 20)
Description
Machined Snap in pin and socket contacts for
heavy duty top performance requirements.
Range
26 to 18 AWG – 0.13 to 1.0 mm2
Crimp and PC Boardmount
Features
Current rating: 7.5 Amps
Plating: Gold
STAMPED AND FORMED
CONTACTS (size 20)
Description
Two piece strip formed snap in pin and socket
contacts.
Range
26 to 20 AWG – 0.13 to 0.5 mm2
Crimp.
Features
Current rating: 5 Amps
Plating: Gold
METAL CIRCULAR CONNECTOR
Description
Metal circular connector with metal bayonet
coupling system.
Range
Shell sizes: 8
Contact arrangements: 8 (6 to 61)
Features (see also page 2)
2 levels of water protection:
Dynamic IP67/IP69K and IP68/IP69K
Suitable for EMC requirements
Min 500 matings/unmatings
2 levels of salt spray: 48 and 96h
Higher salt spray (200/500h) upon request
Back shells with metric cable glands
RoHS compliant
Accessories
Different types of cable clamps
Shielded cable clamp
Dustcaps
Discrimination pins
new
PLASTIC SEALED CONNECTOR
Description
Plastic circular connector with environmental
sealing
Range
Shell Size: 3
Contact arrangements: 9 (3 to19)
Features
Sealed to IP 68/69K
Min 250 mating/unmatings
Jamnut receptacle for efficient panel seal
RoHS compliant
Accessories
Color coded rings for cable identification
Sealing caps
14
Overview - mixed power signal/ruggedized
UTV SERIES
Description
Ruggedized metal circular connector for heavy
duty applications
Range
Shell sizes: 8
Contacts arrangements: 9 (7 to 60)
Features
Completely intermountable with VG95237: the
MS5015 reverse bayonet connectors.
2 levels of waterprotection:
Dynamic IP67/69K and IP68/69K
Up to 500 h salt spray.
Accessories
Straight back shells
Right angle back shells
Grommets and filler plugs
MIXED POWER AND SIGNAL
Description
Power connectors are connectors to meet mixed
power / signal requirements.
This range of power connectors is an extension
of the long established and popular TRIM TRIO
connector series
POWER CONTACTS
Description
Machined snap in pin and sockets contacts
for power applications
Range
Size 12 contacts:
20 to 14 AWG – 0.5 to 2.5 mm2
Size 8 contacts:
16 to 8 AWG – 1.5 to 10 mm2
Features
Current rating: 26 Amps for size 12 contacts
44 Amps for size 8 contacts
Plating: Gold or Silver for size 12 contacts
Gold for size 8 contacts
new
15
Circular
Overview Circular TRIM TRIO connectors
Circular TRIM TRIO connectors are a wide and versatile range that are offered in many
options from low cost plastic to top class metal solutions.
This section gives an overview on available circular connectors for:
1. Bayonet connectors derived from MIL-C-26482 series 1 but using size 16 contacts (1.6mm).
- UTP - Full plastic version.
- UTG - Plastic connector with metal bayonet coupling system.
- UT0 - Metal circular connector offering top class performance characteristics.
2. High density bayonet connectors using size 20 contacts (1.0mm).
- UT0W - Metal circular connector offering top class performance characteristics.
3. Mixed power / signal connectors.
- A range of connectors with contact arrangements offered with a mix of signal and power contacts up to 44 A.
4. Push-pull connectors using size 16 contacts (1.6mm).
- MBG – Plastic connector with metal quick mating feature.
16
Circular - Overview
TRIM TRIO Insert arrangements and
moulded-in contact identifi cation
~ Viewed from front face of male connector ~
Shell size Contact # 16 (Ø 1,6) Contact # 20 (Ø 1,0) VDE versions
Mixed power / signal versions
10
10-4 10-6 10-3 VDE
3 x #16 (Ø 1,6)
Group C 250V
10-3W3
3 x # 16 (Ø 1,6)
3 x # 20 (Ø 1,0)
12
12 - 8 12 - 1 0 12 - 3
3 x #12 (Ø 2,4)
14
14-12 14-19 14-8
4 x # 12 (Ø 2,4)
4 x # 16 (Ø 1,6)
16
16-19 16-26
18
18-23 18-32 18-7 VDE
Group C 380V
7 x # 16 (Ø 1,6)
18-7
2 x #12 (Ø 2,4)
5 x # 16 (Ø 1,6)
17
Shell size Contact # 16 (Ø 1,6) Contact # 20 (Ø 1,0) VDE versions
Mixed power / signal versions
20
20-28 20-41 20-20 VDE
20 x # 16 (Ø 1,6)
Group C 660V
22
22-35 22-55
24
24-48 24-61
24-7
7 x # 8 (Ø 3,6)
2 x # 16 (Ø 1,6)
24-11
4 x # 8 (Ø 3,6)
7 x # 16 (Ø 1,6)
Circular - Overview
Contact identification positions shown are for mating face of pin contact connectors and wire
face of socket contact connectors.
UTP
UTG
UT0 + Ethernet cat 5e
UT0W
18
Circular
Notes
19
Description
IP68 / IP69K plastic circular connector with rapid locking system
“UTS” is the latest addition to the well known TRIM TRIO® interconnect system.
‘UTS’ is a range of Industrial circular multiway connectors available in 3 shell sizes and 9 contact
arrangements.
The keywords for the new UTS are: Rapid – Secure – High performance
Rapid refers to the bayonet coupling system and the total installed cost star-
ting with the rapid wiring & cabling and ending with easy integration into the
customer’s equipment. Rapid also refers to the total service on price request,
samples and production deliveries.
The bayonet coupling system together with the secure and versatile TRIM
TRIO® contacts offer confidence and reliability to both the connection and
the customer’s equipment.
Moreover, UTS is part of the well known TRIM TRIO® interconnect
system with its more than 40 years of field experience.
Extreme performance against water ingress, even in dynamic
situations. This, in combination with a rapid and secure bayonet
locking system makes UTS suitable for any high performance
application.
UTS provides a connection that is faster, easier, safer and more reliable. It makes :
Full Plastic Sealed
Connectors
20
Ultimate environmental protection in demanding applicationsReduced operator fati-
Easy to connect in diffi cult places
Rapid and secure locking system
Labor savings
Reduced operator fatigue
Bayonet coupling system ensures proper mating
Ergonomic plug design with maximized cabling
space and minimized connector length
«Easy grip» bayonet coupling ring
to allow quick and secure mating
Colored rings available for visual
identification
(See accessories page 15)
O-ring seal to guarantee sealing
between plug and backshell
Full Plastic Sealed
Connectors
21
Rapid and secure panel mounting
Captive panel seal to prevent
misalignment
Robust jam nut to guarantee a rapid,
secure and vibration proof panel
mounting
D-shape panel cut to ensure correct
mounting and to prevent the
connector from rotating
Rear panel mount solution suitable
for pre-harnessing and PCB mounting
O-ring seal to guarantee sealing
between receptacle and plug
PCB receptacle...low profi le with rapid installation features
Metal hold down clips to lock
the connector easily on the PCB and
to release stress on solder joints
Pre-assembled PCB contacts
- machined or stamped versions
available
- different solder tails lengths possible
- different plating options
Low profi le housing to limit space
between panel and PCB
Stand-offs to allow cleaning after
soldering
Assembly procedure of jam nut receptacle
Step 1 Step 2 Step 3
Full Plastic Sealed
Connectors
22
* See table page 16 for more details
Connector withstands high pressure water cleaning
Connector will remain IP68 even when:
l Pulling on the cable
l Bending the cable
Dynamic IP68*
Dynamic IP69K*
Extreme environmental sealing performance
IP68 / IP69K sealing … even in dynamic situations
Full Plastic Sealed
Connectors
23
UTS insert arrangements, contact size, rated voltage per VDE 0110 & current ratings
Multiple contact arrangements with VDE 0110
performances
Contact size # 16 (dia. 1.6mm) #20 (dia. 1.0mm)
Rated voltage 250 V 125 V 125 V
Overvoltage category III III III
Pollution degree 3 3 3
Size 10
Number of contacts 3 (2+ grounding) 4 6
Max current (per contact) 13A (machined + stamped) 13A (machine + stamped) 7.5A (machnied) / 5A (stamped)
Size 12
Number of contacts 4 (3 + grounding) 8 10
Max current (per contact) 13A (machined + stamped) 13A (machine + stamped) 7.5A (machined)/ 5A (stamped)
Size 14
Number of contacts 7 (6 + grounding) 12 19
Max current (per contact) 13A (machined + stamped) 13A (machined + stamped) 7.5A (machined)/ 5A (stamped)
l Different levels of current and rated voltages per VDE 0110
l Available in male and female genders
l Custom version available upon request such as:
- Mixed contact sizes
- Power versions
- High speed versions (RJ45, USB, BNC)
Multiple contact arrangements within same connector size
Full Plastic Sealed
Connectors
24
Rapid and secure panel mounting
Captive panel seal to prevent
misalignment
Robust jam nut to guarantee a rapid,
secure and vibration proof panel
mounting
D-shape panel cut to ensure correct
mounting and to prevent the
connector from rotating
Rear panel mount solution suitable
for pre-harnessing and PCB mounting
O-ring seal to guarantee sealing
between receptacle and plug
PCB receptacle...low profi le with rapid installation features
Metal hold down clips to lock
the connector easily on the PCB and
to release stress on solder joints
Pre-assembled PCB contacts
- machined or stamped versions
available
- different solder tails lengths possible
- different plating options
Low profi le housing to limit space
between panel and PCB
Stand-offs to allow cleaning after
soldering
Assembly procedure of jam nut receptacle
Step 1 Step 2 Step 3
Full Plastic Sealed
Connectors
25
MECHANICAL
l Durability: 250 matings & unmatings
l Vibration resistance: Per CEI 60512-4
l Thermal shock: Per MIL-STD1344 method 1003
ELECTRICAL
l Insulation resistance: 5000 MΩ min
l Test potential: 2000 VAC
l As per VDE specifications (see page 8 for more details)
ENVIRONMENTAL
l Operating temp: -40°C to + 105°C
l Flammability rating: UL94V0 and NFF16101 level 2
l Sealing (mated): Dynamic IP68 – 10m under water for 1 week per IEC60529
Dynamic IP69K per DIN40050
l UV resistant
l Salt spray: 500 hours
MATERIAL
l Connectors + Backshell: Thermoplastic
PLATING (only for PCB version)
l Plating for machined contacts: min 0.4 μ gold all over
l Plating for stamped contacts: Min 0.4 μ gold in contact area
3 – 5 μ tin on solder tail
Other platings upon request
CONTACT ACCOMMODATION
l “UTS” connectors accept TRIM TRIO® size 16 or size 20 (depending on arrangement)
removable snap-lock contacts
l Refer to TRIM TRIO® catalog for details
l Contacts to be ordered separately (except PCB versions)
In accordance with UL requirements
Technical characteristics
Full Plastic Sealed
Connectors
26
Cable plug with backshell for pin and socket contacts
UTS6JC...P / UTS6JC...S)
PN for pin
contact PN for socket NB contacts Shell
size L Ø A Ø Cable range
UTS6JC103P UTS6JC103S 3
10 63.2 26.2 1.5 to 5.0
2.5 to 8.00 (standard)
UTS6JC104P UTS6JC104S 4
UTS6JC106P UTS6JC106S 6
UTS6JC124P UTS6JC124S 4
12 66.7 29.7 3.0 to 9.0
5.0 to 12.0 (standard)
UTS6JC128P UTS6JC128S 8
UTS6JC1210P UTS6JC1210S 10
UTS6JC147P UTS6JC147S 7
14 71.5 34.6 5.0 to 12.0
7.0 to 14.0 (standard)
UTS6JC1412P UTS6JC1412S 12
UTS6JC1419P UTS6JC1419S 19
Each plug has 2 seals to cover the specified cable range (See table below).
The standard seal is preassembled
The second seal is supplied as loose piece togoether with a plug.
Color coding ring is optional (See page 15).
Notes : All dimensions are in mm.
Dimensions are not contractual and may be subject to modifi cations.
Full Plastic Sealed
Connectors
27
PN for pin
contact PN for socket NB contacts Shell
size
Ø
ABD
Max
F
Max G H K L Ø M
UTS7103P UTS7103S 3
10 14.9 19.3 33.9 3.2 27.0 22.2 16.6 16.5 17.7
UTS7104P UTS7104S 4
UTS7106P UTS7106S 6
UTS7124P UTS7124S 4
12 19.0 19.3 33.9 3.2 31.8 27.0 20.8 21.2 22.5
UTS7128P UTS7128S 8
UTS71210P UTS71210S 10
UTS7147P UTS7147S 7
14 22.2 19.3 33.9 3.2 34.9 30.2 23.9 24.3 25.7
UTS71412P UTS71412S 12
UTS71419P UTS71419S 19
Jam nut receptacle (wire version) for pin and socket contacts
(UTS7...P / UTS7...S)
Color coding ring is optional (See page 15).
MATING FACE
PANEL CUT OUT
Notes : All dimensions are in mm
Dimensions are not contractual and may be subject to modifi cations.
Full Plastic Sealed
Connectors
28
PCB jam nut receptacle for male contacts
UTS714PSE4K9
DRILLING PATTERN
Shell
size Ø A B C D
Max E F G H J L Ø M
14 22.2 19.3 3 24.5 3.6 3.2 34.9 30.2 4 24.3 25.7
Other arrangements upon request.
Stamped and formed contacts.
Plating:
K9 (std) = Min 0.4μ Gold in contact
area, 3 - 5μ Tin on solder tail
T = 3 - 5μ Tin all over
Ø
A±0.15
B±0.2
C±0.2
D Max
J±0.2
+2
E-2
F max
G±0.25
H±0.3
MATING FACE
PANEL CUT OUT
Notes : All dimensions are in mm.
Dimensions are not contractual and may be subject to modifi cations.
Full Plastic Sealed
Connectors
29
Color coding rings Part numbers for receptacle
Size 10: UTS710CCR*
Size 12: UTS712CCR*
Size 14: UTS714CCR*
* Add G for Green, Y for Yellow, R for Red
Part numbers for receptacle
Size 10: UTS610CCR*
Size 12: UTS612CCR*
Size14: UTS614CCR*
* Add G for Green, Y for Yellow, R for Red
Receptacle sealing cap Plug sealing cap
Part numbers
Size 10: UTS10DCG
Size 12: UTS12DCG
Size 14: UTS14DCG
Part numbers
Size 10: UTS610DCG
Size 12: UTS612DCG
Size 14: UTS614DCG
Accessories
Full Plastic Sealed
Connectors
30
What is sealing and how it is specifi ed
l The connector’s housing, sealing and locking mechanism protect the connection from
external influences such as mechanical shocks, foreign bodies, humidity, dust, water and
other fluids.
l The degree of protection is explained in IEC 60529, DIN EN60529 (DIN 40050) standards
that categorize connections according to foreign body and water protection.
l The degree of protection is indicated by IP (International Protection) followed by 2 digits
(See example below):
First index fi gure
(foreign bodies protection)
Code letters
(International Protection)
Second index fi gure
(water protection)
IP 6 8
First
Index Degree of protection Second
Index Degree of protection
0No protection against accidental contact.
No protection against solid foreign bodies. 0No protection against water.
1
Protection against contacts with any large area by
hand and against large solid foreign bodies with a
diameter bigger than 50mm.
1
Drip-proof.
Protection against vertical water drips.
2
Protection against contacts with the fingers.
Protection against solid foreign bodies with a dia-
meter bigger than 12mm.
2
Drip-proof.
Protection against water drips up to a 15°
angle.
3
Protection against tools, wires or similar objects
with a diameter bigger than 2.5mm..
Protection against small solid bodies with a diame-
ter bigger than 2.5mm.
3
Spray-proof.
Protection against diagonal water drips up to a
60° angle.
4
As 3 however diameter is bigger than 1mm.
4
Splash-proof.
Protection against splashed water from all
directions.
5
Full protection against contacts. Protection against
interior injurious dust deposits. 5
Hose-proof.
Protection against water (out of a nozzle) from
all directions.
6Total protection against contacts. Protection
against penetration of dust. 6Protection against temporary flooding.
7Protection against temporary immersions.
8Protection against water pressure.
Pressure to be specified by supplier.
9K
High pressure hose-proof.
Protection against high pressure water (out of a
nozzle) from all directions.
UTS offers high sealing
performance IP68 / IP69K...
Even in dynamic situations.
SOURIAU reserves the right to make any engineering refinments, alterations or improvements deemed necessary on its products.
The dimensions appearing in this catalogue are thus subject to change without notice. When dimensions are critical detailed drawings should be requested.
Full Plastic Sealed
Connectors
31
Full Plastic Circular Connector
UTP SERIES
Description
“UTP” full plastic industrial circular
connectors are a range of multiway
connectors.
“UTP” provides the complete answer
to the need for economical lightweight,
robust circular connectors and is unique
in offering a plastic bayonet coupling ring
incorporating a metal wave spring, which
locks with an audible positive “click”.
It is available in 8 shell sizes, 10
insert arrangements all intermateable,
interchangeable and intermountable with
the TRIM TRIO “UT0” (full metal) and
“UTG” (plastic with metal coupling ring)
industrial connector families.
Features and benefits
• Available in 8 shell sizes and 10 insert
arrangements incl. 2 VDE versions.
• Available in plug and receptacle versions
for both male and female contacts.
• Connectors and accessories are
moulded from highly durable glass-filled
thermoplastic.
• Flammability rating: UL94-V0.
• Plastic bayonet ring:
- Vibration proof thermoplast
- Metal wave spring loaded.
- Locks with audible positive “click”
- UL recognized File Nr.: E238675
Performance characteristics
Operating
temperature: -55°C to +125°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: 250 matings and
unmatings.
Degree of protection per DIN 40050:
IP65 in mated condition. “H” version used
with water protected backshells.
Construction
Connector, Bayonet ring and accessories
Gass filled thermoplast UL94-V0
Colour: black
Coupling spring: Spring steel
Contact accommodation
• “UTP” connectors accept TRIM TRIO size
16 removable snap-lock contacts (see
contacts section)
• Contacts to be ordered seperately.
- -
- -
HP
S
12
12
14
14
0
6
UTP
UTP
Connector family :
Body variation: 0 : Wall mounting receptacle
6 : Cable plug
Shell size:
Insert arrangement:
Type of contacts: P : Pin contacts
S : Socket contacts
Application No letter : Standard version
H : Water protected version (only receptacle)
Design variation No letter : Moulded-in contact marking (standard version)
Others : Specials versions
How to order
32
Full Plastic Circular Connector
Cable plug for pin contacts (UTP6- - - -P)
Part number Shell Ø A ±0.2 B Ø C
±0.15 Ø D
±0.15 Ø E
±0.2
size max.
UTP6104P / UTP6103PVDE 10 26.7 10.9 12.2
UTP6128P 12 31.4 13.8 15.1
UTP61412P 14 34.5 31.8 17.0 18.3
UTP61619P 16 37.8 19.9 21.5 19.1
UTP61823P / UTP6187PVDEU 18 40.8 31.8 / 33.0 22.4 24.0
UTP62028P 20 43.9 25.6 27.2
UTP62235P 22 47.0 31.8 28.5 30.4
UTP62448P 24 50.1 31.7 33.5
Cable plug for socket contacts (UTP6- - - -S)
Part number Shell Ø A ±0.2 B Ø C ±0.15 Ø D
±0.15 Ø E
±0.2
size max.
UTP6104S / UTP6103SVDE 10 26.7 23.9 / 26.75 10.9 12.2
UTP6128S 12 31.4 13.8 15.1
UTP61412S 14 34.5 23.9 17.0 18.3
UTP61619S 16 37.8 19.9 21.5 19.1
UTP61823S / UTP6187SVDEU 18 40.8 23.9 / 29.0 22.4 24.0
UTP62028S 20 43.9 24.9 25.6 27.2
UTP62235S 22 47.0 28.5 30.4
UTP62448S 24 50.1 26.2 31.7 33.5
Part numbers are suitable for both standard and IP65 water protection versions.
Part numbers are suitable for both standard and IP65 water protection versions.
33
Wall mounting receptacle for pin contacts (UTP0- - - -P)
Part number Shell A B C Ø D E F Ø G Ø J
size max. ±0.15 ±0.2 ±0.15 ±0.25 •0.25 ±0.1 ±0.1
UTP0104P / UTP0103PVDE 10 15.0 18.3 23.8 15.1
UTP0128P 12 2.3 19.0 20.6 26.2 18.2
UTP01412P 14 31.7 11.3 22.2 23.0 28.6 21.4
UTP01619P 16 25.3 24.6 31.0 3.2 24.6
UTP01823P / UTP0187PVDEU 18 31.7/34.0 2.5 11.3/17.9 28.5 27.0 33.3 27.8
UTP02028P 20 14.5 31.7 29.4 36.5 30.9
UTP02235P 22 33.3 3.5 34.9 31.8 39.7 34.1
UTP02448P 24 15.3 38.0 34.9 42.9 3.9 37.3
For IP65 waterprotected version add “H” behind “P” e.g. UTP01412PH
A square flange sealing has to be ordered separately to guarantee a sealing with the equipment. Refer to “Circular accessories” section (UTFD--).
Wall mounting receptacle for socket contacts (UTP0- - - -S)
For IP65 waterprotected version add “H” behind “S” e.g. UTP01412SH
A square flange sealing has to be ordered separately to guarantee a sealing with the equipment. Refer to “Circular accessories” section (UTFD--).
Part number Shell A B C Ø D E F Ø G Ø J
size max. ±0.15 ±0.2 ±0.15 ±0.25 •0.25 ±0.1 ±0.1
UTP0104S / UTP0103SVDE 10 24.3/27.6 15.0 18.3 23.8 15.1
UTP0128S 12 2.3 19.0 20.6 26.2 18.2
UTP01412S 14 24.3 11.3 22.2 23.0 28.6 21.4
UTP01619S 16 25.3 24.6 31.0 3.2 24.6
UTP01823S / UTP0187SVDEU 18 24.3/30.4 2.5 11.3/17.9 28.5 27.0 33.3 27.8
UTP02028S 20 27.0 14.5 31.7 29.4 36.5 30.9
UTP02235S 22 28.0 3.5 34.9 31.8 39.7 34.1
UTP02448S 24 30.4 15.3 38.0 34.9 42.9 3.9 37.3
Full Plastic Circular Connector
34
Notes
Full Plastic Circular Connector
35
Plastic Connector
with Metal Coupling
UTG SERIES
Description
“UTG” Metalok Bantam plastic industrial
circular connectors with metal coupling are
a range of multiway connectors to provide
the complete answer to the need for
leightweight, robust circular connectors.
They are available in 8 shell sizes, 11
insert arrangements all intermateable,
interchangeable and intermountable
with the TRIM TRIO “UT0” and “UTP
industrial connector families.
Features and benefits
• Available in 8 shell sizes and 11 insert
arrangements incl. 3 VDE versions.
• Available in plug and receptacle versions
for both male and female contacts.
• Connectors and accessories are
moulded from highly durable glass-filled
thermoplastic.
• Flammability rating: UL94-V0.
• Metal bayonet ring:
• - Metal wave spring loaded.
• - Locks with audible positive “click”
• - Assures 500 matings and unmatings
- UL recognized file Nr.: E238675
Performance characteristics
Operating
temperature: -55°C to +125°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: Up to 1000 matings
and unmatings.
Vibration Per MIL-STD202
resistance: method 204
Thermal Per MIL-STD202
shock: method 207
Degree of protection per DIN 40050:
IP65 in mated condition. “H” version used
with waterprotected backshells.
Construction
Connector body
Glass filled thermoplast UL94-V0
Colour: black
Coupling ring: Nickel plated brass
Tri-lock pins: Stainless steel
Coupling spring: Spring steel
Contact accommodation
• “UTG” connectors accept TRIM TRIO size
16 removable snap-lock contacts (see
contact section)
• Contacts to be ordered seperately.
How to order
- -
- -
H
N
P
S
12
12
14
14
0
6
UTG
UTG
Connector family :
Body variation: 0 : Wall mounting receptacle
6 : Cable plug
1 : Free hanging receptacle
Shell size:
Insert arrangement:
Type of contacts: P : Pin contacts
S : Socket contacts
Plating N : Nickelplated bayonet ring
Application No letter : Standard version
H : Water protected version (only receptacle)
Design variation No letter : Moulded-in contact marking (standard version)
Others : Specials versions
36
Plastic Connector
with Metal Coupling
Cable plug for pin contacts (UTG6- - - -PN)
Part number Shell Ø A ±0.2 B max. Ø C
±0.15 Ø D
±0.15 E
±0.2
size
UTG6104PN / UTG6103PNVDE 10 21.6 10.9 12.2
UTG6128PN 12 24.8 13.8 15.1
UTG61412PN 14 28.0 31.8 17.0 18.3
UTG61619PN 16 31.2 19.9 21.5 19.1
UTG61823PN / UTG6187PNVDEU 18 34.3 31.8 / 33.0 22.4 24.0
UTG62028PN / UTG62020PN 20 37.5 31.8 / 35.3 25.6 27.2
UTG62235PN 22 40.7 31.8 26.5 30.4
UTG62448PN 24 43.9 31.7 33.5
Cable plug for socket contacts (UTG6- - - -SN)
Part number Shell Ø A ±0.2 B max. Ø C
±0.15 Ø D
±0.15 E
±0.2
size
UTG6104SN / UTG6103SNVDE 10 21.6 23.9 / 26.75 10.9 12.2
UTG6128SN 12 24.8 13.8 15.1
UTG61412SN 14 28.0 23.9 17.0 18.3
UTG61619SN 16 31.2 19.9 21.5 19.1
UTG61823SN / UTG6187SNVDEU 18 34.3 23.9 / 29.0 22.4 24.0
UTG62028SN / UTG62020SN 20 37.5 24.9 25.6 27.2
UTG62235SN 22 40.7 28.5 30.4
UTG62448SN 24 43.9 26.2 31.7 33.5
Part numbers are suitable for both standard and IP65 water protection versions.
Part numbers are suitable for both standard and IP65 water protection versions.
37
Plastic Connector
with Metal Coupling
Wall mounting receptacle for pin contacts (UTG0- - - -P)
Part number Shell A B C Ø D E F Ø G Ø H Ø J
size max.
±0.15 ±0.2 ±0.15 ±0.25 •0.25 ±0.1 ±0.1 ±0.1
UTG0104P / UTG0103PVDE
10 15.0 18.3 23.8 17.3 15.1
UTG0128P
12 2.3 19.0 20.6 26.2 21.8 18.2
UTG01412P
14 31.7 11.3 22.2 23.0 28.6 25.0 21.4
UTG01619P
16 25.3 24.6 31.0 3.2 28.1 24.6
UTG01823P / UTG0187PVDEU
18 31.7/34.0 2.5 11.3/17.9 28.5 27.0 33.3 31.3 27.8
UTG02028P / UTG02020P
20 33.3/34.3 14.5 31.7 29.4 36.5 34.5 30.9
UTG02235P
22 33.3 3.5 34.9 31.8 39.7 37.7 34.1
UTG02448P
24 15.3 38.0 34.9 42.9 3.9 40.9 37.3
For IP65 waterprotected version add “H” behind “P” e.g. UTG01412PH
A square flange sealing has to be ordered separately to guarantee a sealing with the equipment. Refer to “Circular accessories” section (UTFD--).
Wall mounting receptacle for socket contacts (UTG0- - - -S)
Part number Shell A B C Ø D E F Ø G Ø H Ø J
size max.
±0.15 ±0.2 ±0.15 ±0.25 •0.25 ±0.1 ±0.1 ±0.1
UTG0104S / UTG0103SVDE
10 24.3/27.6 15.0 18.3 23.8 17.3 15.1
UTG0128S
12 2.3 19.0 20.6 26.2 21.8 18.2
UTG01412S
14 24.3 11.3 22.2 23.0 28.6 25.0 21.4
UTG01619S
16 25.3 24.6 31.0 3.2 28.1 24.6
UTG01823S / UTG0187SVDEU
18 24.3/30.4 2.5 11.3/17.9 28.5 27.0 33.3 31.3 27.8
UTG02028S / UTG02020S
20 27.0 14.5 31.7 29.4 36.5 34.5 30.9
UTG02235S
22 28.0 3.5 34.9 31.8 39.7 37.7 34.1
UTG02448S
24 30.4 15.3 38.0 34.9 42.9 3.9 40.9 37.3
For IP65 waterprotected version add “H” behind “S” e.g. UTG01412SH
A square flange sealing has to be ordered separately to guarantee a sealing with the equipment. Refer to “Circular accessories” section (UTFD--).
38
Plastic Connector
with Metal Coupling
Free hanging receptacle for pin contacts (UTG1- - - -P)
Part number Shell A B ±0.15 C
±0.2 Ø D
±0.15 Ø E
±0.15
size max.
UTG1104P / UTG1103PVDE 10 15.0 19.5
UTG1128P 12 19.0 23.5
U T G 114 12 P 14 31.7 8.65 22.2 27.0
U T G 116 19 P 16 5.0 25.3 30.0
UTG11823P / UTG1187PVDEU 18 31.7/34.0 8.65/15.35 28.5 33.0
UTG12028P / UTG12020P 20 33.3/34.3 12.05 31.7 36.5
UTG12235P 22 33.3 34.9 39.5
UTG12448P 24 13.85 38.0 42.5
For IP65 waterprotected version add “H” behind “P” e.g. UTG11412PH
Free hanging receptacle for socket contacts (UTG1- - - -S)
Part number Shell A B ±0.15 C
±0.2 Ø D
±0.15 Ø E
±0.15
size max.
UTG1104S / UTG1103SVDE 10 24.3/27.6 15.0 19.5
UTG1128S 12 19.0 23.5
U T G 114 12 S 14 24.3 8.65 22.2 27.0
U T G 116 19 S 16 5.0 25.3 30.0
UTG11823S / UTG1187SVDEU 18 24.3/30.4 8.65/15.35 28.5 33.0
UTG12028S / UTG12020S 20 12.05 31.7 36.5
UTG12235S 22 25.9 34.9 39.5
UTG12448S 24 13.85 38.0 42.5
For IP65 waterprotected version add “H” behind “S” e.g. UTG11412SH
39
Metal Circular
Connector
UTO SERIES
Description
“UT0” industrial circular connectors are a range
of multiway connectors available in 8 shell sizes
and 8 insert arrangements all intermateable,
interchangeable and intermountable with the
TRIM TRIO “UTG” and “UTP industrial connector
families.
“UT0” is equipped with identical shells from
military connectors complying to MIL-C-26482
spec.
Strong and rugged built to resist every
environmental and mechanical requirement for
indoor and outdoor applications.
Amongst several characteristics, “UT0” offers
possibilities on: Shielding, High levels on sealing
and salt spray. UT0 is also the perfect solution
to connect cat5e Ethernet applications in
combination with other signals, using the same
TRIM TRIO contacts (consult factory for more info).
Features and benefits (see p2)
• Suitable for shielding applications
• Available in 8 shell sizes and 8 insert
arrangements.
• Available in plug and receptacle versions for
both male and female contacts.
• Different insert orientations possible.
• Plastic inserts with flammability rating: UL94-V0.
• 2 levels of water protection: Dynamic IP67 and
IP68 both versions are IP69K
• 2 levels of salt spray: 48h and 96h
Higher salt spray resistance (200/500h) upon
request
• Cat5e Ethernet compatible. Can be combined
with other signals offering the advantage to use
same contacts (consult factory).
• UL recognition in process.
• Metal bayonet ring:
- Metal wave spring loaded
- Locks with audible positive “click”
- Assures 500 matings and unmatings
• RoHS compliant
Performance characteristics
Operating temp: -40°C to +105°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: Up to 2000 matings and
unmatings.
Vibration Per MIL-STD202
resistance: method 204
Thermal shock: Per MIL-STD202
method 207
Corrosion: Salt spray per MIL-STD 202
method 101
48h (standard version)
96h (black anodised
coupling ring)
Higher salt spray resistance (200/500h) upon
request
Shielding effectiveness: 95 dB at 1 Mhz
Degree of water protection per DIN 40050:
Dynamic IP67 / IP68 / IP69K in mated condition
and in combination with sealed back shell.
How to order
– –– –H or H6
H
–
–
P
S
12
12
14
14
0
6
UT0
UT0
Body variation: 0 : Wall mounting receptacle
6 : Cable plug
7 : Jam nut receptacle for rear panel mounting
Shell size:
Insert arrangement:
Type of contacts: P : Pin contacts
S : Socket contacts
Insert polarisation: No letter : Standard version
W, X, Y, Z: Different orientations (consult factory)
Application: H : Standard version, water protected IP 67 & IP 69K
H6 : Water protected IP 68 & IP 69K (only needed for wall mounting & jam nut receptacles)
Design variation: No letter : Standard version
Others : Special versions
Plating: No letter : Standard is nickel plating (48h salt spray)
01: Black anodised jam nut (96h salt spray)
02: Black anodised coupling ring (96h salt spray)
new
Construction
Shells: Zinc alloy
Backshells and cable glands: Brass
Coupling ring: Aluminium alloy
Coupling spring: Spring stainless steel
Insert: Glass-filled thermoplast UL94-V0
RoHS compliant
Contact accommodation
• “UT0” connectors accept TRIM TRIO size 16
crimp-type removable snap-lock contacts (see
contacts section)
• Contacts to be ordered seperately.
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
40
Cable plug for pin contacts (UT06- - - -PH)
Part number Shell Ø A ±0.2 B max. Ø C
±0.15 Ø D
±0.15 E
±0.25
size
UT06104PH 10 21.80 10.2 20.00
UT06128PH 12 26.10 13.4 23.60
UT061412PH 14 29.30 16.7 26.80 23.25
UT061619PH 16 32.45 33.00 19.7 30.00
UT061823PH 18 35.25 21.7 33.30
UT062028PH 20 38.80 24.9 36.55
UT062235PH 22 42.00 28.1 39.50 25.20
UT062448PH 24 45.05 31.2 42.60
Cable plug for socket contacts (UT06- - - -SH)
Part number Shell Ø A ±0.2 B max. Ø C
±0.15 Ø D
±0.15 E
±0.25
size
UT06104SH 10 21.80 10.2 20.00
UT06128SH 12 26.10 13.4 23.60
UT061412SH 14 29.30 33.00 16.7 26.80 23.25
UT061619SH 16 32.45 19.7 30.00
UT061823SH 18 35.25 21.7 33.30
UT062028SH 20 38.80 24.9 36.55
UT062235SH 22 42.00 27.30 28.1 39.50 25.20
UT062448SH 24 45.05 31.2 42.60
Part numbers are suitable for both IP67 and IP68 water protection
For 96h salt spray version add ”02” behind “H” e.g. UT061412PH02 (only bayonet ring will be black anodised)
Part numbers are suitable for both IP67 and IP68 water protection
For 96h salt spray version add ”02” behind “H” e.g. UT061412SH02 (only bayonet ring will be black anodised)
E ± 0,25
E ± 0,25
Metal Circular
Connector
new
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
41
Wall mounting receptacle for pin contacts (UT00----PH/PH6)
Wall mounting receptacle for socket contacts (UT00----SH/SH6)
Part number
IP67 IP68
Shell
size
A
max.
B
± 0.3
C
± 0.2
Ø D
± 0.15
E
± 0.25
F
± 0.25
Ø G
± 0.1
Ø H
± 0.1
Ø J
± 0.1
UT00104PH UT00104PH6 10
33.23 1.6 11.35
15.0 18.3 23.8
3.2
17 . 3 14 . 2
UT00128PH UT00128PH6 12 19.0 20.6 26.2 21.8 18.4
UT001412PH UT001412PH6 14 22.2 23.0 28.6 25.0 21.5
UT001619PH UT001619PH6 16 25.3 24.6 31.0 28.1 24.6
UT001823PH UT001823PH6 18 28.5 26.9 33.3 31.3 27.8
UT002028PH UT002028PH6 20
34.75 2.4 14 . 5 5 31.7 29.4 36.5 34.5 30.9
UT002235PH UT002235PH6 22 34.9 31.8 39.7 37.7 34.1
UT002448PH UT002448PH6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3
Part numbers are suitable for both 48h and 96h salt spray.
A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to “Circular accessories” section (UTFD--).
Part numbers are suitable for both 48h and 96h salt spray.
A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to “Circular accessories” section (UTFD--).
Part number
IP67 IP68
Shell
size
A
max.
B
± 0.3
C
± 0.2
Ø D
± 0.15
E
± 0.25
F
± 0.25
Ø G
± 0.1
Ø H
± 0.1
Ø J
± 0.1
UT00104SH UT00104SH6 10
25.20 1.6 11.35
15.0 18.3 23.8
3.2
17 . 3 14 . 2
UT00128SH UT00128SH6 12 19.0 20.6 26.2 21.8 18.4
UT001412SH UT001412SH6 14 22.2 23.0 28.6 25.0 21.5
UT001619SH UT001619SH6 16 25.3 24.6 31.0 28.1 24.6
UT001823SH UT001823SH6 18 28.5 26.9 33.3 31.3 27.8
UT002028SH UT002028SH6 20
29.00 2.4 14 . 5 5 31.7 29.4 36.5 34.5 30.9
UT002235SH UT002235SH6 22 34.9 31.8 39.7 37.7 34.1
UT002448SH UT002448SH6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3
B ± 0,3
B ± 0,3
Ø G ± 0,1
Metal Circular
Connector
new
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
42
Jam nut receptacle for pin contacts (UT07----PH/PH6) - suitable for rear panel mounting
Jam nut receptacle for socket contacts (UT07---SH/SH6) - suitable for rear panel mounting
Part number
IP67 IP68
Shell
size
Ø A
± 0.15
B
± 0.2
D
Max.
F
Max.
G
± 0.25
H
± 0.3
K
± 0.25
L
± 0.2
Ø M
± 0.2
UT07104PH UT07104PH6 10 14 . 9
19.30 33.90 3.2
27.0 22.2 16.6 17.0 17.7
UT07128PH UT07128PH6 12 19.0 31.8 27.0 20.8 21.2 22.5
UT071412PH UT071412PH6 14 22.2 34.9 30.2 23.9 24.3 25.7
UT071619PH UT071619PH6 16 25.3 38.1 33.3 27.1 27.5 28.7
UT071823PH UT071823PH6 18 28.5 41.3 36.5 30.3 30.6 32.0
UT072028PH UT072028PH6 20 31.7 24.70 39.00 6.4
46.1 39.7 33.4 33.8 35.2
UT072235PH UT072235PH6 22 34.9 49.2 42.9 36.6 37.0 38.4
UT072448PH UT072448PH6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5
For 96h salt spray version add ”01” at the end of the part number e.g. UT071412PH601 (only jam nut will be black anodised)
For 96h salt spray version add ”01” at the end of the part number e.g. UT071412PH601 (only jam nut will be black anodised)
Part number
IP67 IP68
Shell
size
Ø A
± 0.15
B
± 0.2
D
Max.
F
Max.
G
± 0.25
H
± 0.3
K
± 0.25
L
± 0.2
Ø M
± 0.2
UT07104SH UT07104SH6 10 14 . 9
19.30 33.00 3.2
27.0 22.2 16.6 17.0 17.7
UT07128SH UT07128SH6 12 19.0 31.8 27.0 20.8 21.2 22.5
UT071412SH UT071412SH6 14 22.2 34.9 30.2 23.9 24.3 25.7
UT071619SH UT071619SH6 16 25.3 38.1 33.3 27.1 27.5 28.7
UT071823SH UT071823SH6 18 28.5 41.3 36.5 30.3 30.6 32.0
UT072028SH UT072028SH6 20 31.7 24.70 39.00 6.4
46.1 39.7 33.4 33.8 35.2
UT072235SH UT072235SH6 22 34.9 49.2 42.9 36.6 37.0 38.4
UT072448SH UT072448SH6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5
Metal Circular
Connector
new
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
43
Insert rotation positions
The table shows possible insert rotation
positions.
5 positions N,W,X,Y and Z differ in
the degree of rotation for the various
connectors sizes.
The table indicates the exact degree of
rotation.
Note: Insert rotation positions are optional
(consult factory)
Shell size Contact
number
Insert rotation positions
WX Y Z
10 4 45---
12 8 26---
14 12 60---
16 19 30 165 - 315
18 2 3 - 158 - 270
20 28 79 - 259 -
22 35 13 162 198 265
24 48 60 120 189 351
Extra 0-seals for wall mounting (UT00) and jam nut (UT07)
receptacle connectos
An extra 0-seal must be mounted on the receptacle connectors when a backshell is used.
This to guarantee the IP68 sealing level
Part number Shell size
UT010REARSEAL 10
UT012REARSEAL 12
UT014REARSEAL 14
UT016REARSEAL 16
UT018REARSEAL 18
UT020REARSEAL 20
UT022REARSEAL 22
UT024REARSEAL 24
Metal Circular
Connector
new
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
44
Notes
Metal Circular
Connector
45
High Density Metal
Circular Connector
UT0W SERIES
Description
“UT0W” industrial circular connectors are
a range of multi way connectors available
in 8 shell sizes and 8 high density insert
arrangements.
“UT0W” wall mounting receptacle connectors
have the same panel cut-out dimensions as the
MIL-C-26482 series I specifications.
Strong and rugged built to resist every
environmental and mechanical requirement for
indoor and outdoor applications.
Amongst several characteristics, “UT0W” offers
possibilities on: Shielding, high levels on sealing
and salt spray.
Features and benefits (see p2)
• Suitable for EMC requirements.
• Available in 8 shell sizes and 8 insert
arrangements.
• Available in plug and receptacle version for
both male and female contacts.
• Different insert orientations possible
• Plastic inserts with flammability rating: UL94-
V0.
• 2 levels of water protection: Dynamic IP67
and IP68 both versions are IP69K
• 2 levels of salt spray: 48h and 96h
Higher salt spray resistance (200/500h) upon
request
• Higher salt spray (200/500h) upon request.
• UL recognition in process.
• Metal bayonet ring:
- Metal wave spring loaded
- Locks with audible positive “click”
- Assures 500 matings and unmatings
• RoHS compliant
How to order
Performance characteristics
Operating
temperature: -40°C to +105°C
Insulation resistance: 5000 MΩ min.
Test potential: 1500 VAC
Durability: 500 matings and
unmatings.
Vibration Per MIL-STD202
resistance: method 204
Thermal Per MIL-STD202
shock: method 207
Corrosion: Salt spray per MIL-STD
202 method 101
48h (standard version)
96h (black anodised
coupling ring)
Higher salt spray resistance (200/500h) upon
request
Shielding effectiveness: 65 dB at 10 Mhz
Degree of water protection per DIN 40050:
Dynamic IP67 / IP68 / IP69K in mated condition
and in combination with sealed back shell
Construction
Shells and accessories: Zinc alloy
Coupling ring: Aluminium alloy
Coupling spring: Spring stainless steel
Insert: Glass-filled thermoplast UL94-V0
Finish: Nickel plated
RoHS compliant
Contact accommodation
• “UT0W” connectors accept TRIM TRIO size 20
crimp-type removable snap-lock contacts (see
contacts section)
• Contacts to be ordered seperately
Connector family:
UT0W
UT0W
0
6
16
16
26
26
P
S
–
–
H or H6
H
- -
- -
–
–
Body variation :
0 : Wall mounting receptacle
6 : Cable plug
7 : Jam nut receptacle for rear panel mounting
Shell size :
Insert arrangement :
Type of contacts :
P : Pin contacts
S : Socket contacts
Insert polarisation :
No letter : Standard version
W, X, Y, Z : Different orientations (consult factory)
Application :
H : Standard version, water protection IP 67 & IP 69K
H6 : Water protected IP 68 & IP 69K (only needed for wall mounting & jam nut receptacles)
Design variation :
No letter : Standard version
Others : Special versions
Plating :
No letter : standard is nickel plating (48h salt spray)
01: Black anodised, jam nut (96h salt spray)
02: Black anodised coupling ring (96h salt spray)
new
46
Cable plug for pin contacts (UT0W6----PH)
Cable plug for socket contacts (UT0W6----SH)
Part number Shell size Ø A ± 0.2 B max. Ø C ± 0.15 Ø D ± 0.15 E ± 0.25
UT0W6106PH 10 21.80
33.00
10.2 20.00
19.00
UT0W61210PH 12 26.10 13.4 23.60
UT0W61419PH 14 29.30 16.7 26.80
UT0W61626PH 16 32.45 19.7 30.00
UT0W61832PH 18 35.25 21.7 33.30
UT0W62041PH 20 38.80 24.9 36.55
UT0W62255PH 22 42.00 28.1 39.50
UT0W62461PH 24 45.05 31.2 42.60
Part number Shell size Ø A ± 0.2 B max. Ø C ± 0.15 Ø D ± 0.15 E ± 0.25
UT0W6106SH 10 21.80
25.30
10.2 20.00
19.00
UT0W61210SH 12 26.10 13.4 23.60
UT0W61419SH 14 29.30 16.7 26.80
UT0W61626SH 16 32.45 19.7 30.00
UT0W61832SH 18 35.25 21.7 33.30
UT0W62041SH 20 38.80
27.30
24.9 36.55
UT0W62255SH 22 42.00 28.1 39.50
UT0W62461SH 24 45.05 31.2 42.60
Part numbers are suitable for both IP67 and IP68 water protection
For 96h salt spray version add ”02” behind “H” e.g. UT0W61419PH02 (only bayonet ring will be black anodised)
Part numbers are suitable for both IP67 and IP68 water protection
For 96h salt spray version add ”02” behind “H” e.g. UT0W61419SH02 (only bayonet ring will be black anodised)
E ± 0,25
E ± 0,25
High Density Metal
Circular Connector
new
47
Wall mounting receptacle for pin contacts (UT0W0----PH/PH6)
Wall mounting receptacle for socket contacts (UT0W0----SH/SH6)
Part number
IP67 IP68
Shell
size
A
max.
B
± 0,3
C
± 0.2
Ø D
± 0.15
E
± 0.25
F
± 0.25
Ø G
± 0.1
Ø H
± 0.1
Ø J ±
0.1
UT0W0106PH UT0W0106PH6 10
33.23 1.6 11.35
15.0 18.3 23.8
3.2
17 . 3 14 . 2
UT0W01210PH UT0W01210PH6 12 19.0 20.6 26.2 21.8 18.4
UT0W01419PH UT0W01419PH6 14 22.2 23.0 28.6 25.0 21.5
UT0W01626PH UT0W01626PH6 16 25.3 24.6 31.0 28.1 24.6
UT0W01832PH UT0W01832PH6 18 28.5 26.9 33.3 31.3 27.8
UT0W02041PH UT0W02041PH6 20
34.75 2.4 14 . 5 5 31.7 29.4 36.5 34.5 30.9
UT0W02255PH UT0W02255PH6 22 34.9 31.8 39.7 37.7 34.1
UT0W02461PH UT0W02461PH6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3
Part numbers are suitable for both 48hrs and 96h salt spray.
A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to “Circular accessories” section (UTFD--).
Part numbers are suitable for both 48hrs and 96h salt spray.
A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to “Circular accessories” section (UTFD--).
Part number
IP67 IP68
Shell
size
A
max.
B
± 0.3
C
± 0.2
Ø D
± 0.15
E
± 0.25
F
± 0.25
Ø G
± 0.1
Ø H
± 0.1
Ø J ±
0.1
UT0W0106SH UT0W0106SH6 10
25.20 1.6 11.35
15.0 18.3 23.8
3.2
17 . 3 14 . 2
UT0W01210SH UT0W01210SH6 12 19.0 20.6 26.2 21.8 18.4
UT0W01419SH UT0W01419SH6 14 22.2 23.0 28.6 25.0 21.5
UT0W01626SH UT0W01626SH6 16 25.3 24.6 31.0 28.1 24.6
UT0W01832SH UT0W01832SH6 18 28.5 26.9 33.3 31.3 27.8
UT0W02041SH UT0W02041SH6 20
29.00 2.4 14 . 5 5 31.7 29.4 36.5 34.5 30.9
UT0W02255SH UT0W02255SH6 22 34.9 31.8 39.7 37.7 34.1
UT0W02461SH UT0W02461SH6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3
B ± 0,3
B ± 0,3
High Density Metal
Circular Connector
new
48
Jam nut receptacle for pin contacts (UT0W7---PH/PH6) - suitable for rear panel mounting
Jam nut receptacle for socket contacts (UT0W7---SH/SH6) - suitable for rear panel mounting
Part number
IP67 IP68
Shell
size
Ø A
± 0.15
B
± 0.2
D
Max.
F
Max.
G
± 0.25
H
± 0.3
K
± 0.2
L
± 0.2
Ø M
± 0.2
UT0W7106PH UT0W7106PH6 10 14 . 9
19.30 33.90 3.2
27.0 22.2 16.6 17.0 17.7
UT0W71210PH UT0W71210PH6 12 19.0 31.8 27.0 20.8 21.2 22.5
UT0W71419PH UT0W71419PH6 14 22.2 34.9 30.2 23.9 24.3 25.7
UT0W71626PH UT0W71626PH6 16 25.3 38.1 33.3 27.1 27.5 28.7
UT0W71832PH UT0W71832PH6 18 28.5 41.3 36.5 30.3 30.6 32.0
UT0W72041PH UT0W72041PH6 20 31.7 24.70 39.00 6.4
46.1 39.7 33.4 33.8 35.2
UT0W72255PH UT0W72255PH6 22 34.9 49.2 42.9 36.6 37.0 38.4
UT0W72461PH UT0W72461PH6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5
For 96h salt spray version add ”01” at the end of the part number e.g. UT0W71419PH601 (only jam nut will be black anodised)
For 96h salt spray version add ”01” at the end of the part number e.g. UT0W71419PH601 (only jam nut will be black anodised)
Part number
IP67 IP68
Shell
size
Ø A
± 0.15
B
± 0.2
D
Max.
F
Max.
G
± 0.25
H
± 0.3
K
± 0.2
L
± 0.2
Ø M
± 0.2
UT0W7106SH UT0W7106SH6 10 14 . 9
19.30 33.00 3.2
27.0 22.2 16.6 17.0 17.7
UT0W71210SH UT0W71210SH6 12 19.0 31.8 27.0 20.8 21.2 22.5
UT0W71419SH UT0W71419SH6 14 22.2 34.9 30.2 23.9 24.3 25.7
UT0W71626SH UT0W71626SH6 16 25.3 38.1 33.3 27.1 27.5 28.7
UT0W71832SH UT0W71832SH6 18 28.5 41.3 36.5 30.3 30.6 32.0
UT0W72041SH UT0W72041SH6 20 31.7 24.70 39.00 6.4
46.1 39.7 33.4 33.8 35.2
UT0W72255SH UT0W72255SH6 22 34.9 49.2 42.9 36.6 37.0 38.4
UT0W72461SH UT0W72461SH6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5
High Density Metal
Circular Connector
new
49
Insert rotation positions
The table shows possible insert rotation
positions.
5 positions N,W,X,Y and Z differ in
the degree of rotation for the various
connectors sizes.
The table indicates the exact degree of
rotation.
Note: Insert rotation positions are optional
(consult factory)
Shell size Contact
number
Insert rotation positions
WX Y Z
10 6 90---
12 10 60 155 270 295
14 19 30 165 315 -
16 2 6 60 - 275 338
18 3 2 85 138 222 265
20 41 45 126 225 -
22 55 30 142 226 314
24 61 90 180 270 324
Extra 0-seals for wall mounting (UT0W0) and jam nut (UT0W7)
receptacle connectos
An extra 0-seal must be mounted on the receptacle connectors when a backshell is used.
This to guarantee the IP68 sealing level
Part number Shell size
UT010REARSEAL 10
UT012REARSEAL 12
UT014REARSEAL 14
UT016REARSEAL 16
UT018REARSEAL 18
UT020REARSEAL 20
UT022REARSEAL 22
UT024REARSEAL 24
High Density Metal
Circular Connector
new
50
Notes
High Density Metal
Circular Connector
new
51
Shielded Connectors
1. Put all the parts over the cable as
shown on the picture.
2. Keep about 10mm of the shielding
(dim A)
3. The total strip length (dim B) of
the outer jacket has to be defined
practically. This length is defined by
the length of the adaptor, the cable
gland body, type of contacts, the
gender of the plug connector and the
dim. L as shown on picture 2.
4. The strip length of the individual wires
is defined in the different contact
sections.
How to assemble shielded connectors…
5. Put the contacts in the corresponding
cavities
6. Screw / tighten the adaptor and the
cable gland body. The max tightening
torque is indicated in the table below.
7. Make sure the dim L is kept after the
assembly of the adaptor and the cable
gland body. This dimension is needed
to allow repair of the harnessing. It will
also release the stress on the contacts
when the assembly of the cable clamp
is finished.
8. Carefully slide the shielding ferrule
until is positioned over the shielding
and as close as possible to the cable
jacket.
9. Make sure that the shielding ferrule is
correctly polarised. This polarisation is
a feature to avoid twisting of the cable
during the tightening of the cable
gland.
Cable gland body
Adaptor
Shielding ferrule
B
A
52
Shielded Connectors
10. Manually push the shielding ferrule
inside the cable gland body.
11. Make sure the shielding ferrule does
not slide over the cable jacket.
12. Hold the cable in this position prior
to the assembly of the cable gland
hood.
How to assemble shielded connectors… (con’t)
13. Hold the cable in the same position
as explained above and tighten
the cable gland hood. The max
tightening torque is indicated in the
table below.
14. To ease the tightening operation, an
empty receptacle connector can be
used when fixed in a bench.
15. Make sure that the cable is not
twisted during the tightening
operation.
Max tightening torques in Nm
Shell size Cable gland body Cable gland hood
10 65
12 10 8
14 10 8
16 14 12
18 14 12
20 24 20
22 24 20
24 24 20
Above tightening torques are indicative and have to be adjusted in accordance to the cable diameter and application.
Cable gland body
53
Ruggedized Reverse
Bayonet Connectors
UTV SERIES
Completely
intermountable with
VG 95234 :
the MS 5015 reverse
bayonet connectors
Description
This connector series is an enhanced
version of the VG 95234 connec-
tor standard but remains completely
intermountable with VG 95234 : the
MS 5015 reverse bayonet connec-
tors.
new
Dynamic IP68 / IP69K
Up to 500 hr salt spray
VG95234 intermountable
Features and benefits (see also page 3)
• An interfacial seal is present on the male inserts to extend the creepage distance and to have a better sealing when
the connector is mated.
• The insulator is retained into the plug or receptacle shell by a metallic retaining ring which can be removed with a small
screwdriver. Once removed, user can defined insulator orientation.
• Contacts gauge 8, 12 or 16 are machined crimp contacts, removable thanks to a clip on the contact.
• No tools are needed to insert contacts into the insulator. An extraction tool is available to extract the contacts. The tool
is engaged by the front face of the connector and the contacts are rear released.
• Contacts are crimped thanks to very common toolings.
• The connector is rated 2 levels of water protection (see page 3):
Dynamic IP67/IP68/IP69K when mated and used with suitable accessories, a grommet or a sealed back shell.
• This connector can be supplied fully assembled or in component form (please consult us).
• Corrosion spray resistance is rated up to 500 hours salt spray
• Cadmium and lead free materials are used
54
Description
Receptacle
Plug
Wear pins
Roller
Pin contact to
crimp with metallic
retention clip
Receptacle shell
Interfacial seal
Retaining insulator ring
Hard Thermoplastic insert
Socket contact to crimp
with metallic retention
clip
Hard Thermoplastic insert
Retaining insulator ring
Plug shell
Yellow marking for locking end indication
Ruggedized Reverse
Bayonet Connector
55
Ruggedized Reverse
Bayonet Connector
56
Modification Code :
Please consult us
Insert Orientation : N ; W ; X ; Y ; Z or 0
0 = for insulator not installed in the shell
Contact type : P - Pin
S - Socket
Layouts
Shell size : 18 - 20 -22 - 24 - 28 - 32 - 36 - 40
Connectors Ordering Information
(without contacts and accessories)
Nota : Please consult us if you want to order the connector in component form (shell and insert).
Shells, backshells, contacts and accessories have to be ordered separately
Shell type
Rear mounting receptacle B
Plug D
Rear mounting receptacle for PC tails
contact # 16 contacts mounted C
Series
UTV B 22 — 14 P N - -
Ruggedized Reverse
Bayonet Connector
57
Shell A B C ØD E ØF
Threading G
H ØK
size Max 0/+0.4 ±0.2 Max ±0.3 0/+0.15 Class 2A ±0.1 -0.15/0
18 45.50 23.05 4.00 25.50 35.00 3.25 1”x20
27.00 30.80
UNEF
20 45.50 23.05 4.00 28.70 38.00 3.25 1 1/8”x18 29.40 34.20
UNEF
22 45.50
23.05 4.00 31.90 41.00 3.25 1 1/4”x18
31.80 37.40
UNEF
24 48.00
23.05 4.00 35.20 44.50 3.75 1 3/8”x18
34.90 40.90
UNEF
28 48.00 24.05 4.00 41.50 50.80 3.75 1 5/8”x18
39.70 46.70
UNE
32 48.00 24.05 4.00 47.90 57.00 4.35 1 7/8”x16
44.50 53.40
UN
36 48.00 24.05 4.00 52.50 63.50 4.35 2 1/16”x16
49.20 59.60
UNS
40 48.00 24.05 4.00 59.00 70.00 4.35 2 5/16”x16
55.50 65.50
UN
Connector Dimensions
Receptacle
Receptacle with PC tails contact
#
16
Ruggedized Reverse
Bayonet Connector
58
Panel Cutout
Shell A B C Maximum thickness of the panel
size ± 0.15 0/+0.3 ± 0.10 for rear mounting
4 holes Ø C
Note : The above panel cut-out enables front mounting of all receptacles.
18 27 31,2 3,4 3
20 29,4 34,6 3,4 3
22 31,8 37,8 3,4 3
24 34,9 41,3 3,9 3
28 39,7 47,1 3,9 3
32 44,5 53,8 4,5 3
36 49,2 60 4,5 3
40 55,5 66,4 4,5 3
Ruggedized Reverse
Bayonet Connector
59
Plug
Shell A B C Threading G
size Max Max Max Class 2A
18 45.60 37.30 25.50 1”x 20
UNEF
20 45.60 41.50 28.70
1 1/8”x 18
UNEF
22 45.60 44.00 31.90 1 1/4”x 18
UNEF
24 45.60 48.50 35.20 1 3/8”x 18
UNEF
28 48.10 55.30 41.50 1 5/8”x 18
UNEF
32 48.10 62.00 47.90 1 7/8”x 16
UN
36 48.10 66.80 52.50 2 1/6” x 16
UNS
40 48.10 74.50 59.00 2 5/16”x 16
UN
Ruggedized Reverse
Bayonet Connector
60
Layouts
(marking on front face of female insulator)
Alternative insert orientation positions
Layouts N W X Y Z
Male Female
18-19 0 - 120 240 - 10 16
20-15 0 80 - - 280 13 21
22-14 0 80 - - 280 16 25
24-10 0 80 110 250 280 19 31
28-21 0 80 110 250 280 27 40
32-A13 0 65 130 230 295 45 75
36-A22 0 80 110 250 280 53 88
40-A35 0 70 130 230 290 61 99
40-A60 0 80 110 250 280 63 100
Key Angular Position N
18-19 20-15 22-14 24-10 28-21
10 contacts # 16 7 contacts # 12 19 contacts # 16 7 contacts # 8 37 contacts # 16
13 contacts # 12 22 contacts # 12 35 contacts # 12 60 contacts # 16
32 A13 36 A22 40 A35 40 A60
Ø 3.6 Ø 5 Ø 3.6 Ø 7 Ø 3.6
Ø 5 Ø 5 Ø 5 Ø 3.6
Note : For other layouts: consult factory.
Angular displacement of insert Insulator
weight (g)
Ruggedized Reverse
Bayonet Connector
61
Adaptor type : 10 - long 00 - short
Grommet type : M for male or L for female (if grommet needed)
Accessories
Backshells ordering information
Modification Code
Adaptor type : 10 - long 00 - short
Layout (grommet included) or 00 (without grommet)
Taille de boîtier : 18 - 20 - 22 - 24 - 28 - 32 - 36 - 40
Shell size : 18 - 20 - 22 - 24 - 28 - 32 - 36 - 40
S - Straight backshell E - Elbow backshell
Backnut R
Cable clamp C
Backshell for PMA tube S
Cable clamp with sealing gland J
Cable clamp with sealing gland (trumpet) K
Cable clamp with sealing gland for shielding T
UTV J S 18 — 00 00
Series UTV C S 22 — 14 00 M
Adaptor ordering information
Shell size : 18 - 20 - 22 - 24 - 28 - 32 - 36 - 40
S - Adaptor for straight backshell
P - Adaptor with PG outlet*
Series UTV P S 18 — 00 00
Plug cap: F
ex: VGE1Fxx (xx = shell size)
receptacle cap: E
ex: VGE1Exx (xx = shell size)
Ruggedized Reverse
Bayonet Connector
* For metric threading: consult factory
62
Accessories
Grommet (only when needed on spare parts)
Grommet are delivered with a conical ring
Grommet filler plug
Layout Grommet type Part number Wire insulator diameter (mm)
Mini Maxi
*
18-19 male UTVM18-1900 1,2 2,95
18-19 female UTVL18-1900 1,2 2,95
20-15 male UTVM20-1500 1,2 3,6
20-15 female UTVL20-1500 1,2 3,6
22-14 male UTVM22-1400 1,2 2,95
22-14 female UTVL22-1400 1,2 2,95
24-10 male UTVM24-1000 4,2 6,2
24-10 female UTVL24-1000 4,2 6,2
28-21 male UTVM28-2100 1,2 2,95
28-21 female UTVL28-2100 1,2 2,95
32A13 male UTVM32A1300 1,2 3,6
32A13 female UTVL32A1300 1,2 3,6
36A22 male UTVM36A2200 1,2 3,6
36A22 female UTVL36A2200 1,2 3,6
40A35 male UTVM40A3500 1,2 3,6
40A35 female UTVL40A3500 1,2 3,6
40A60 male UTVM40A6000 1,2 2,95
40A60 female UTVL40A6000 1,2 2,95
* Please consult us if your wire has an insulation diameter over these values, we will propose you another grommet.
Contact Part Color Photo
size number
# 16
8500-479 blue
#
12
Panel gasket
Shell size Part number Dimensions
A ± 0.5 B ± 0.2 C 0/+0.3 Ø D 0/+0.3
20 UTVG20 38 29.4 34.2 4.2
22 UTVG22 41 31.8 37.4 4.2
24 UTVG24 44.5 34.9 40.9 4.2
28 UTVG28 50.8 39.7 46.7 5.1
32 UTVG32 57 44.5 53.4 5.1
36 UTVG36 63.5 49.2 59.6 5.1
40 UTVG40 69.9 55.5 65.5 5.1
4 holes Ø D
Ruggedized Reverse
Bayonet Connector
63
Synoptic of straight backshells (for IP67 applications)
Synoptic of adaptors
Receptacle Plug
Long
adaptor
with
PG
outlet
Short
adaptor
with
PG
outlet
UTV PS**0010
UTV PS**0000
Ref Description Description
Ref
Cable clamp
with
sealing
gland for
shielding
UTV TS****00
Backnut Cable
clamp
UTV RS****00 UTV CS****00
Backshell
for
PMA tube
UTV SS****10
Backshell
for
PMA tube
UTV SS****00
Cable clamp
with
sealing
gland
UTV JS****10
Cable clamp
with
sealing
gland
UTV JS****00
Cable clamp
with
sealing gland
(trumpet
shape to
avoid cable
wound)
UTV KS****10
Cable clamp
with
sealing gland
(trumpet
shape to
avoid cable
wound)
UTV KS****00
Cable clamp
with
sealing
gland for
shielding
UTV TS****10
+++++++++
U
NB: IP68 backshells are available under
request
Ruggedized Reverse
Bayonet Connector
64
Dimensions
Shell 18 Shell 20 Shell 22 Shell 24 Shell 28 Shell 32 Shell 36 Shell 40
**** **** **** **** **** **** **** **** **** **** **** **** **** **** ****
= = = = = = = = = = = = = = =
18-19 18-00 20-15 20-00 22-14 22-00 24-10 24-00 28-21 28-00 32A13 32A00 36A22 36A00 40A00
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
****
=
40A35
40A60
Note : Dimensions are not contractual and may be subject to modifications.
⇒
All backshells are compatible with a grommet and a conical ring.
⇒
For cable or PMA tube diameter not included in the above chart please consult us.
Example of rear dimensions calculation
of a shell size 18 connector with a sealing gland
cable clamp backshell without grommet and with a long adaptor
Backshell P/N : UTV JS 18 00 10
Rear dimensions receptacle + backshell :
A + F + M = 94,1 mm
A 22.5 22.5 22.5 22.5 24 24 24 24
B 45.6 45.6 45.6 45.6 48.1 48.1 48.1 48.1
C 18 18 18 18 17 17 17 17
D 44 44 44 44 47
E 28,5 28,5 26 26 23
F 48,6 48,6 48,6 48,6 58 48 48 48
G 34 34 34 34 33 33 33 33
H 35,5 35,5 38,5 38,5 38.5 38.5 52 46
K PMA17 PMA17 PMA23 PMA23 PMA29 PMA29 PMA36 PMA48
M 23 23 31 31 31.5 31.5 37.5 45
N 7/12 9/14 10/18 10/18 14/24 14/24 22/30 25/35
P 30 31,5 38,5 38,5 45 45 51.5 57
S 33,5 33,5 43 43 52 52
T 8/12,5 10/14,5 13,5/18 13,5/18 17/24 17/24
U 4/15,5 7/15,5 9/15,5 8,5/19,5 9,5/19,5
PG13,5 PG16 PG 21 PG21 PG29 PG29 PG36 PG42
Ruggedized Reverse
Bayonet Connector
65
E
Synoptic of elbow backshells (IP67 applications)
Part number
++++
Backshell
for PMA tube
Cable clamp
with sealing gland
Cable clamp with
sealing gland
(trumpet shape to avoid
cable wound)
Cable clamp
with sealing
gland for shielding
UTV SE****00 UTV JE****00 UTV KE****00 UTV TE****00
Receptacle
Plug
Description
Part number
+
Cable clamp
UTV CE****00
Description
Receptacle
Plug
U
NB: IP68 backshells
are available upon
request
Ruggedized Reverse
Bayonet Connector
66
Dimensions
Note : Dimensions are not contractual and may be subject to modifications.
⇒
All backshells are compatible with a grommet and a conical ring.
⇒
For cable or PMA tube diameter not included in the above chart please consult us.
Shell 18 Shell 20 Shell 22 Shell 24 Shell 28 Shell 32 Shell 36 Shell 40
**** **** **** **** **** **** **** **** **** **** **** **** **** **** ****
= = = = = = = = = = = = = = =
18-19 18-00 20-15 20-00 22-14 22-00 24-10 24-00 28-21 28-00 32A13 32A00 36A22 36A00 40A40
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
with
grommet
without
grommet
****
=
40A35
40A60
A 22,5 22,5 22,5 22,5 24 24 24 24
B 45,6 45,6 45,6 45,6 48,1 48,1 48,1 48,1
C 44 43,5 43,5 46 41
D 26 25,5 17,5 20 18
E 28,5 28,5 26 26 23
F 43 44 44 49 46 59 60
H 35,5 35,5 38,5 38,5 38,5 38,5 46
K PMA17 PMA17 PMA23 PMA23 PMA29 PMA36 PMA36
M 23 23 31 31 31,5 31,5 37.5
N 7/12 9/14 10/18 10/18 14/24 14/24 22/30
P 30 31,5 38,5 38,5 45 45 51,5
S 33,5 33,5 43 43 52 52
T 8/12,5 10/14,5 13,5/18 13,5/18 17/24 17/24
U 4/15,5 7/15,5 9/15,5 8,5/19,5 9,5/19,5
PG13,5 PG16 PG 21 PG21 PG29 PG29 PG36 PG42
Ruggedized Reverse
Bayonet Connector
67
Tooling Data
Contact Contact Contact Contact Contact Size
Crimp tool Locator Extraction
size type Ø mm Part number mm2 AWG tool
#16 Male 1.6 RM16M23K 0.52 - 1.50 20-16 MH860 (M22520/7-01) MH86164G RX2025GE1
#16 Female 1.6 RC16M23K 0.52 - 1.50 20-16 MH860 (M22520/7-01) MH86164G RX2025GE1
#16 Male 1.6 RM14M30K 2.50 14 RX2025GE1
#16 Female 1.6 RC14M30K 2.50 14 RX2025GE1
#12 Male 2.4 8291 1437 NA 0.50 20 M317 VGE10077A 5106.021.09.24
#12 Female 2.4 8291 1436 A 0.50 20 M317 VGE10077A 5106.021.09.24
#12 Male 2.4 8291 1435 NA 0.75 - 1.00 18 M317 VGE10077A 5106.021.09.24
#12 Female 2.4 8291 1434 A 0.75 - 1.00 18 M317 VGE10077A 5106.021.09.24
#12 Male 2.4 8291 1463 NA 1.50 16 M317 VGE10077A 5106.021.09.24
#12 Female 2.4 8291 1462 A 1.50 16 M317 VGE10077A 5106.021.09.24
#12 Male 2.4 8291 1465 NA 2.50 14 M317 VGE10077A 5106.021.09.24
#12 Female 2.4 8291 1464 A 2.50 14 M317 VGE10077A 5106.021.09.24
#12 Male 2.4 8291 1437 NK 0.50 20 M317 VGE10077A 5106.021.09.24
#12 Female 2.4 8291 1436 K 0.50 20 M317 VGE10077A 5106.021.09.24
#12 Male 2.4 8291 1435 NK 0.75 - 100 18 M317 VGE10077A 5106.021.09.24
#12 Female 2.4 8291 1434 K 0.75 - 100 18 M317 VGE10077A 5106.021.09.24
#12 Male 2.4 8291 1463 NK 1.50 16 M317 VGE10077A 5106.021.09.24
#12 Female 2.4 8291 1462 K 1.50 16 M317 VGE10077A 5106.021.09.24
#12 Male 2.4 8291 1465 NK 2.50 14 M317 VGE10077A 5106.021.09.24
#12 Female 2.4 8291 1464 K 2.50 14 M317 VGE10077A 5106.021.09.24
#8 Male 3.6 8291 3601 A 1.50 16 M317 VGE10078A 5106.021.09.36
#8 Female 3.6 8291 3600 A 1.50 16 M317 VGE10078A 5106.021.09.36
#8 Male 3.6 8291 3603 A 2.50 14 M317 VGE10078A 5106.021.09.36
#8 Female 3.6 8291 3602 A 2.50 14 M317 VGE10078A 5106.021.09.36
#8 Male 3.6 8291 3605 A 4.00 12 M317 VGE10078A 5106.021.09.36
#8 Female 3.6 8291 3604 A 4.00 12 M317 VGE10078A 5106.021.09.36
#8 Male 3.6 8291 3607 A 6.00 10 M317 VGE10078A 5106.021.09.36
#8 Female 3.6 8291 3606 A 6.00 10 M317 VGE10078A 5106.021.09.36
TP1142
(selector on 8)
TP1142
(selector on 8)
For detailed information on crimp tooling: see crimp tooling section.
AF8
(M22520/3-1)
AF8
(M22520/3-1)
Ruggedized Reverse
Bayonet Connector
68
Notes
Ruggedized Reverse
Bayonet Connector
69
Description
Power connectors are circular
connectors to meet mixed power
and signal requirements.
This range of power connectors
is an extension of the long
established and popular TRIM
TRIO connector series shown
in this catalogue, but with the
advantage of offering a number of
additional features
Features and benefits
• Connectors suitable for mixed
power / signal application.
• Design in flexibility of TRIM TRIO.
The next pages are listing some of the mixed power / signal TRIM TRIO connector configurations.
It is intended to give you a general idea of our design capabilities.
As the creation of mixed power / signal TRIM TRIO connectors is an ongoing process, we advise you to
contact our nearest SOURIAU sales office if you have specific connector needs.
Our design flexibility is virtually unlimited, so we are always willing to consider any customised design.
Separate data sheets with more detailed technical info of the listed mixed power / signal TRIM TRIO versions
are available.
Mixed Power and Signal
Our Design flexibilities are virtually unlimited on:
• Contact arrangements
• Mixed contact lay-outs
• Power versions
• Hybrid contacts arrangements
• Filtered connectors
• High speed solutions
• Robust designs
• Higher corrosion withstandings
• ...
70
Mixed Power and Signal
UT0/UTG size 10-3W3 with:
3 contacts #20 (1.0mm)
3 standard TRIM TRIO contacts
Description
UT0/UTG size 10-3W3 is a standard shell size 10 connector with a
modified insert arrangement to accept:
3 TRIM TRIO #20 (1.0mm) contacts
3 TRIM TRIO #16 (1.6mm) contacts
Typical performance characteristics
• For characteristics, refer to UTG/UT0 series and Contact sections
Available part numbers:
Contact accommodation
• #20 cavities accept the #20 TRIM TRIO size 16 crimptype
removable snap-lock contacts (see contacts section)
• #16 cavities accept the #16 TRIM TRIO crimptype removable
snap-lock contacts (see contacts section)
• Contacts to be ordered seperately.
Part number Shell size Description
UTG1103W3S
10
Free hanging receptacle for socket contacts
UTG6103W3PN Cable plug connector for pin contacts
UT01103W3SH6 Metal free hanging receptacle for socket contacts
For dimensions or others characteristics, refer to section UTG/UT0 with corresponding shell size or refer to the technical drawings
UTG size 12-3 with 3 power
contacts.
Description
UTG size 12-3 is a standard shell size 12 connector with a modified
insert arrangement to accept
3 power contacts #12 (2.4mm).
It also offers 3 extra discrimination cavities that accept the
SMSPKE3 discrimination pins.
Typical performance characteristics
• Power contacts #12 (2.4mm) for up to 26 Amp
• For furtur characteristics, refer to UTG series and power contacts
8291 series.
Available part numbers:
Contact accommodation
• Power cavities accept the 8291 power contacts (see power
contacts 8291 section)
• Contacts to be ordered seperately.
Part number Shell size Description
UTG0123S
12
Panel mount receptacle for socket contacts.
UTG0123SH Panel mount receptacle for socket contacts – IP65 waterprotection
UTG0123P (consult factory) Panel mount receptacle for pin contacts.
UTG0123PH (consult factory) Panel mount receptacle for pin contacts – IP65 waterprotection
UTG6123SN (consult factory Cable plug connector for socket contacts.
UTG6123PN Cable plug connector for pin contacts.
For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings
71
Mixed Power and Signal
UTG size 14-8 with 4 power &
4 standard TRIM TRIO contacts.
Description
UTG size 14-8 is a standard shell size 14 connector with a modified
insert arrangement to accept
4 power contacts #12 (2.4mm) and
4 TRIM TRIO #16 (1.6mm) signal contacts.
Typical performance characteristics
• Power contacts #12 (2.4mm) for up to 26 Amp
• Per VDE 0110 (refer to technical drawings)
• For furtur characteristics, refer to UTG series and power contacts
8291 series.
Available part numbers:
Contact accommodation
• Signal cavities accept the TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contacts section)
• Power cavities accept the 8291 power contacts (see power
contacts 8291 section)
• Contacts to be ordered seperately.
Part number Shell size Description
UTG0148P24PVDE
14
Panel mount receptacle for pin contacts.
UTG0148P24PHVDE Panel mount receptacle for pin contacts – IP65 waterprotection
UTG0148P24SVDE (consult factory) Panel mount receptacle for socket contacts.
UTG0148P24SHVDE (consult factory) Panel mount receptacle for socket contacts – IP65 waterprotection
UTG6148P24SNVDE Cable plug connector for socket contacts.
UTG6148P24PNVDE (consult factory) Cable plug connector for pin contacts.
For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings
UTG size 18-7 with 2 power &
5 standard TRIM TRIO contacts.
Description
UTG size 18-7 is a standard shell size 18 connector with a
modified insert arrangement to accept
2 power contacts #12 (2.4mm) and
5 TRIM TRIO #16 (1.6mm) signal contacts.
Typical performance characteristics
• Power contacts #12 (2.4mm) for up to 26 Amp
• Per VDE 0110 Group C – 380V.
• 2 mating levels.
• For furtur characteristics, refer to UTG series and power contacts
8291 series.
Available part numbers:
Contact accommodation
• Signal cavities accept the TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contacts section)
• Power cavities accept the 8291 power contacts (see power
contacts 8291 section)
• Contacts to be ordered seperately.
Part number Shell size Description
UTG0187PVDE34
18
Panel mount receptacle for pin contacts.
UTG0187PHVDE34 Panel mount receptacle for pin contacts – IP65 waterprotection
UTG0187SVDE34 Panel mount receptacle for socket contacts.
UTG0187SHVDE34 Panel mount receptacle for socket contacts – IP65 waterprotection
UTG6187PNVDE34 Cable plug connector for pin contacts.
UTG6187SNVDE34 Cable plug connector for socket contacts.
For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings
72
Mixed Power and Signal
UTG size 24-11 with 4 power &
7 standard TRIM TRIO contacts.
Description
UTG size 24-11 is a standard shell size 24 connector with a
modified insert arrangement to accept
4 power contacts #8 (3.6mm) and
7 TRIM TRIO #16 (1.6mm) signal contacts.
Typical performance characteristics
• Power contacts #12 (2.4mm) for up to 26 Amp
• Per VDE 0110 (refer to technical drawings)
• For furtur characteristics, refer to UTG series and power contacts
8291 series..
Available part numbers:
Contact accommodation
• Signal cavities accept the TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contacts section)
• Power cavities accept the 8291 power contacts (see power
contacts 8291 section)
• Contacts to be ordered seperately.
Part number Shell size Description
UTG02411P
24
Panel mount receptacle for pin contacts.
UTG02411PH Panel mount receptacle for pin contacts – IP65 waterprotection
UTG02411S (consult factory) Panel mount receptacle for socket contacts.
UTG02411SH (consult factory) Panel mount receptacle for socket contacts – IP65 waterprotection
UTG62411SN Cable plug connector for socket contacts.
UTG62411PN (consult factory) Cable plug connector for pin contacts.
For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings
UTG size 24-7 with 7 power &
2 standard TRIM TRIO contacts.
Description
UTG size 24-7 is a standard shell size 24 connector with a
modified insert arrangement to accept
7 power contacts #8 (3.6mm) and
2 TRIM TRIO #16 (1.6mm) signal contacts.
Typical performance characteristics
• Power contacts #8 (3.6mm) for up to 44 Amp
• VDE 0110 Group C – 660V.
• UL recognized file Nr.: E238675
• Central power cavity is advanced for grounding purposes.
• For furtur characteristics, refer to UTG series and power contacts
8291 series.
Available part numbers:
Contact accommodation
• Signal cavities accept the TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contacts section)
• Power cavities accept the 8291 power contacts (see power
contacts 8291 section)
• Contacts to be ordered seperately.
Part number Shell size Description
UTG0247P
24
Panel mount receptacle for pin contacts.
UTG0247PH Panel mount receptacle for pin contacts – IP65 waterprotection
UTG0247S Panel mount receptacle for socket contacts.
UTG0247SH Panel mount receptacle for socket contacts – IP65 waterprotection
UTG6247PN Cable plug connector for pin contacts.
UTG6247SN Cable plug connector for socket contacts.
For dimensions or others characteristics, refer to section UTG with corresponding shell size or refer to the technical drawings
73
Circular Boardmount Versions
UTP7 size 12-8 for boardmount
applications
Description
UTP7 size 12-8 is a standard jam nut receptacle size 12 connector
with pre-assembled TRIM TRIO #16 (1.6mm) dipsolder contacts
Performance characteristics
Refer to technical drawings
Available part numbers (consult factory):
Different part number are available with:
• Male or female contacts
• Machined or stamped and formed contacts
• Different solder tail lengths
74
Mixed Power and Signal
Notes
75
Circular Accessories
Plastic cable clamp with strain relief (UTG--AC)
Part number Shell Cable range Ø A ± 0.4 L
± 0.5
size Ø
UTG10AC 10 3.0 - 8.70 21.0 40.0
UTG12AC 12 3.0 - 12.8 24.0 40.0
UTG14AC 14 4.0 - 13.8 27.0 46.0
UTG16AC 16 5.0 - 17.0 30.2 46.0
UTG18AC 18 5.0 - 19.0 33.3 50.0
UTG20AC 20 5.0 - 21.0 36.5 55.0
UTG22AC 22 5.0 - 23.0 39.7 60.0
UTG24AC 24 8.0 - 27.0 42.9 65.0
Plastic cable clamp with strain relief nut for waterprotected (IP65) applications (UTG--PG)
Part number Shell Sealing* L ± 1 A
± 0.5
size outer dia x inner dia’s
UTG10PG 10 13.5 x 5 x 8 54 21.0
UTG12PG 12 16 x 7 x 10.5 x 13 x 16 57 24.0
UTG14PG 14 18.5 x 7 x 105 x 13 x 16 62 27.0
UTG16PG 16 20.5 x 8 x 10.5 x 13 x 16 68 30.2
UTG18PG 18 20.5 x 8 x 10.5 x 13 x 16 71 33.3
UTG20PG 20 26 x 11 x 15 x 18 x 22 82 36.5
UTG22PG 22 26 x 11 x 15 x 18 x 22 88 39.7
UTG24PG 24 35 x 19 x 23 x 27 x 31 103 42.9
*In order to accommodate different cable dia’s, the sealing exisits of different layers which can be pulled out easily.
Cable clamp has a PG style cable gland. For threading specifications see last page of this section “Circular accessories”
For threading specifications see last page of this section “Circular accessories”
Suitable for UTP-UTG
Suitable for UTP-UTG
76
Circular Accessories
Plastic cable clamp with strain relief nut for waterprotected (IP65) applications (UTG--ST)
Part number Shell Cable range Dia. A ± 0.5 L
± 1
size
UTG10ST 10 2 - 6 21.0 64
UTG12ST 12 3 - 7 24.0 64
UTG14ST 14 6 - 9 27.0 69
UTG16ST 16 7 - 12 30.2 72
UTG18ST 18 33.3 76
UTG20ST 20 9 - 16 36.5 80
UTG22ST 22 39.7 86
UTG24ST 24 13 - 20 42.9 91
Metal cable clamp with strain relief (UT0--AC)
Cable clamp has a PG style cable gland. For threading specifications see last page of this section “Circular
Part number Shell size Max cable dia.
Excl. sealing Ø A±0.2 B maxi C maxi
UT010AC 10 5.0 16.3 21.6 31.0
UT012AC 12 8.2 19.4 25.0 31.5
UT014AC 14 10.0 22.5 27.4 34.0
UT016AC 16 13.0 25.8 29.4 34.0
UT018AC 18 16.0 29.2 35.2 31.4
UT020AC 20 16.0 32.5 35.2 32.0
UT022AC 22 19.3 35.7 41.1 31.0
UT024AC 24 20.6 38.8 42.4 31.0
For threading specifications see last page of this section “Circular accessories”
Suitable for UTP-UTG
Suitable for UT0-UT0W
77
Circular Accessories
Short cable clamp with strain relief nut for waterprotected applications (IP68). (UT0--JCS)
Long cable clamp with strain relief nut for waterprotected applications (IP68). (UT0--JC)
Part number Shell
size
Clamping range
(Ø en mm) min / max
L± 1
Thread A
Short
version
Long
version
Short
version
Long
version
UT010JCS UT010JC 10 03 / 06 48.5 60.5 9/16 – 24 UNEF Class 2A
UT012JCS UT012JC 12 06 / 10 49.5 61.5 11/16 – 24 UNEF Class 2A
UT014JCS UT014JC 14 06 / 10 53.5 67.5 13/16 – 20 UNEF Class 2A
UT016JCS UT016JC 16 9.5 / 14 62.5 73.5 15/16 – 20 UNEF Class 2A
UT018JCS UT018JC 18 9.5 / 14 65.5 76.0 1’’ 1/16 – 18 UNEF Class 2A
UT020JCS UT020JC 20 11.5 / 18 70.5 84.0 1’’ 3/16 – 18 UNEF Class 2A
UT022JCS UT022JC 22 11.5 / 18 76.5 88.0 1’’ 5/16 – 18 UNEF Class 2A
UT024JCS UT024JC 24 11.5 / 18 82.0 92.0 1’’ 7/16 – 18 UNEF Class 2A
Short cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0--JCSL)
Long cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0--JCL)
Part number Shell
size
Clamping range
(Ø en mm) min / max
L± 1
Thread A
Short
version
Long
version
Short
version
Long
version
UT010JCSL UT010JCL 10 05 / 08 49.5 61.5 9/16 – 24 UNEF Class 2A
UT012JCSL UT012JCL 12 08 / 12 49.5 62.5 11/16 – 24 UNEF Class 2A
UT014JCSL UT014JCL 14 08 / 12 54.5 68.5 13/16 – 20 UNEF Class 2A
UT016JCSL UT016JCL 16 11.5 / 18 68.5 79.5 15/16 – 20 UNEF Class 2A
UT018JCSL UT018JCL 18 11.5 / 18 71.5 82.0 1’’ 1/16 – 18 UNEF Class 2A
UT020JCSL UT020JCL 20 15 / 24 77.5 91.0 1’’ 3/16 – 18 UNEF Class 2A
UT022JCSL UT022JCL 22 15 / 24 83.5 95.0 1’’ 5/16 – 18 UNEF Class 2A
UT024JCSL UT024JCL 24 15 / 24 89.0 99.0 1’’ 7/16 – 18 UNEF Class 2A
Cable clamp has a Metric style cable gland. For threading specifications see last page of this section “Circular accessories”
Cable clamp has a Metric style cable gland. For threading specifications see last page of this section “Circular accessories”
Suitable for UT0-UT0W
Suitable for UT0-UT0W
78
Circular Accessories
Short shielded cable clamp with strain relief nut for waterprotected applications (IP68). (UT0S----JCS)
Long shielded cable clamp with strain relief nut for waterprotected applications (IP68). (UT0S----JC)
Part number Shell
size
Clamping range
(Ø en mm) min / max
L± 1
Thread A
Short
version
Long
version
Short
version
Long
version
UT0S10JCS UT0S10JC 10 04 / 6.5 58.5 70.5 9/16 – 24 UNEF Class 2A
UT0S12JCS UT0S12JC 12 07 / 10.5 61.5 74.5 11/16 – 24 UNEF Class 2A
UT0S14JCS UT0S14JC 14 07 / 10.5 66.5 80.5 13/16 – 20 UNEF Class 2A
UT0S16JCS UT0S16JC 16 10 / 14.5 72.5 83.5 15/16 – 20 UNEF Class 2A
UT0S18JCS UT0S18JC 18 10 / 14.5 75.5 86.0 1’’ 1/16 – 18 UNEF Class 2A
UT0S20JCS UT0S20JC 20 13.5 / 18 84.5 97.5 1’’ 3/16 – 18 UNEF Class 2A
UT0S22JCS UT0S22JC 22 13.5 / 18 90.0 101.5 1’’ 5/16 – 18 UNEF Class 2A
UT0S24JCS UT0S24JC 24 13.5 / 18 95.5 105.5 1’’ 7/16 – 18 UNEF Class 2A
Short shielded cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0S----JCSL)
Long shielded cable clamp with large strain relief nut for waterprotected applications (IP68). (UT0S----JCL)
Part number Shell
size
Clamping range
(Ø en mm) min / max
L± 1
Thread A
Short
version
Long
version
Short
version
Long
version
UT0S10JCSL UT0S10JCL 10 05 / 8.5 59.5 71.5 9/16 – 24 UNEF Class 2A
UT0S12JCSL UT0S12JCL 12 08 / 12.5 61.5 74.5 11/16 – 24 UNEF Class 2A
UT0S14JCSL UT0S14JCL 14 08 / 12.5 66.5 80.5 13/16 – 20 UNEF Class 2A
UT0S16JCSL UT0S16JCL 16 13.5 / 18 82.5 93.5 15/16 – 20 UNEF Class 2A
UT0S18JCSL UT0S18JCL 18 13.5 / 18 85.5 96.0 1’’ 1/16 – 18 UNEF Class 2A
UT0S20JCSL UT0S20JCL 20 17 / 24 93.0 106.5 1’’ 3/16 – 18 UNEF Class 2A
UT0S22JCSL UT0S22JCL 22 17 / 24 99.0 110.5 1’’ 5/16 – 18 UNEF Class 2A
UT0S24JCSL UT0S24JCL 24 17 / 24 104.5 114.5 1’’ 7/16 – 18 UNEF Class 2A
Cable clamp has a Metric style cable gland. For threading specifications see last page of this section “Circular accessories”
Cable clamp has a Metric style cable gland. For threading specifications see last page of this section “Circular accessories”
Suitable for UT0-UT0W
Suitable for UT0-UT0W
79
Circular Accessories
Metal right angle cable clamp with strain relief nut (UTG--LPGN / UTO--LPGN)
Part number Part number Shell A max B max Cable range
For UTP / UTG For UT0 / UT0W size
UTG10LPGN UT010LPGN 10 48.0 30.0 13.5 x 5 x 8
UTG12LPGN UT012LPGN 12 50.0 33.5 16 x 7 x 10.5 x 13
UTG14LPGN UT014LPGN 14 52.0 36.5 18.5 x 7 x 10.5 x 13 x 16
UTG16LPGN UT016LPGN 16 55.0 39.5 20.5 x 8 x 10.5 x 13 x 16
UTG18LPGN UT018LPGN 18 60.0 46.0 20.5 x 8 x 10.5 x 13 x 16
UTG20LPGN UT020LPGN 20 58.0 47.0 26 x 11 x 15 x 18 x 22
UTG22LPGN UT022LPGN 22 58.0 48.5 26 x 11 x 15 x 18 x 22
UTG24LPGN UT024LPGN 24 67.0 54.5 35 x 19 x 23 x 27 x 31
Cable clamp has a PG style cable gland. For threading specifications see last page of this section “Circular accessories”
Metal shrink boot adaptor (UTG--AD) for UTP and UTG
Part number Shell size Ø A±0.2 B
UTG10AD 10 21.0
UTG12AD 12 24.0 19.2
UTG14AD 14 27.0
UTG16AD 16 30.0 21.5
UTG18AD 18 33.3
UTG20AD 20 36.5 22.8
UTG22AD 22 39.7
UTG24AD 24 42.9 21.9
Standard plating is anodised black. For tin plating add “T” at the end of the part number e.g. UTG12ADT
For threading specifications see last page of this section “Circular accessories”
80
Circular Accessories
Environmental dustcap for plugs (UTG6--DCG)
Part number Shell size A max. B
UTG610DCG 10 20.0
UTG612DCG 12 24.0
UTG614DCG 14 27.5 20.8
UTG616DCG 16 30.5
UTG618DCG 18 33.5
UTG620DCG 20 36.5
UTG622DCG 22 40.0 22.5
UTG624DCG 24 43.0
For dustcap without chain skip “G” e.g. UTG612DC
Metal shrink boot adaptor for UTO and UTOW
Part number Shell size Ø A±0.2 B
For threading specifications see last page of this section “Circular accessories”
UT010AD 10 21
UT012AD 12 24 24.7
UT014AD 14 27
UT016AD 16 30
UT018AD 18 33.3
UT020AD 20 36.5 27
UT022AD 22 39.7
UT024AD 24 42.9
Suitable for UTP-UTG-UT0-UT0W
81
Circular Accessories
Plastic environmental dustcap for receptacles (UTP--DCG)
Part number Shell size Ø A ±0.2 B max.
UTP10DCG 10 26.7 19.3
UTP12DCG 12 31.4 20.0
UTP14DCG 14 34.5
UTP16DCG 16 37.8 20.2
UTP18DCG 18 40.8
UTP20DCG 20 43.9
UTP22DCG 22 47.0 21.8
UTP24DCG 24 50.1
For dustcap without chain skip “G” e.g. UTP12DC
For jam dustcap consult factory
Metal environmental dustcap for receptacles (UT0--DCG)
Part number Shell size A max.
UT010DCG 10 20.8
UT012DCG 12 24.9
UT014DCG 14 28.1
UT016DCG 16 31.3
UT018DCG 18 34.4
UT020DCG 20 37.6
UT022DCG 22 40.8
UT024DCG 24 43.9
For dustcap without chain skip “G” e.g. UTG12DC
For jam dustcap consult factory
Suitable for UTP-UTG-UT0-UT0W
Suitable for UTP-UTG-UT0-UT0W
82
Sealing for wall mounting receptacle (UTFD1-B)
Part number Shell size Ø F ±0.1 R
±0.25 S
±0.25 Ø V
UTFD12B 10 15.9 18.3 23.8
UTFD13B 12 19.0 20.6 26.2
UTFD14B 14 22.2 23.0 28.6
UTFD15B 16 25.4 24.6 31.0 3.3
UTFD16B 18 28.6 27.0 33.3
UTFD17B 20 31.8 29.4 36.5
UTFD18B 22 34.9 31.8 39.7
UTFD19B 24 38.1 34.9 42.9 4.0
Cable gland threadings used on cable clamps
Shell size Thread size on connectors PG threading Metric threading
10 9/16 - 24 UNEF PG9 M16 x 1.5
12 11/16 - 24 UNEF PG11 M20 x 1.5
14 13/16 - 20 UNEF PG13.5 M20 x 1.5
16 15/16 - 20 UNEF PG16 M25 x 1.5
18 1-1/16 - 18 UNEF PG16 M25 x 1.5
20 1-3/16 - 18 UNEF PG21 M32 x 1.5
22 1-5/16 - 18 UNEF PG21 M32 x 1.5
24 1-7/16 - 18 UNEF PG29 M32 x 1.5
Circular Accessories
Adaptors for flexible cable protection systems (conduits)
Adaptors for flexible cable protections
systems that fit to the TRIM TRIO circular
connectors are available from cable
protection systems manufacturers (e.g.
PMA).
2 solutions are offered:
• UNEF Adaptors that fit directly onto the
connectors (left picture)
• METRIC Adaptors that fit onto the metal
cable clamp tubes as indicated on pages
43 and 44 (right picture)
These types of adaptors offer extra
protection to single wire applications
(electrical, coax, Fiber optic … etc.)
Note: the adaptors are not available from
Souriau. They must be ordered directly from
the manufacturers
Suitable for UTP-UTG-UT0-UT0W
0,8 ± 0,2
83
5000 Mating Cycle
Plastic Connector
MBG SERIES
Description
The BANTAMATE II cylindrical plastic
connector has been designed for use in
applications requiring a high number of
mating cycles and rapid connections and
disconnections.
BANTAMATE II meets minimum durability
requirements of 5000 mating/unmating
cycles by using a unique contact wiping
system consisting of a lubricant saturated
foam pad bonded to a spring loaded
stripper plate within the receptacle or plug.
On mating, the stripper plate is pushed
deep into the connector wiping a thin film
of lubricant onto the male contacts.
A distinctive shape provides mating ease in
blind or difficult to reach applications.
Some typical applications would include test
equipment, medical diagnostic equipment,
or any of the hardware interconnections
found in the modern electronic office.
Features and benefits
• 5000 mating / unmating cycles
• Lubricated male contacts with spring
actuated foam plate
• Quick and easy installation with latching
mechanism
• Easy mating due to the positive
polarisation, even in blind spots
• Unmated male contacts are protected by
the spring actuated plate
• Available with 4, 12, 19, 30, and 46
contact positions.
• Applicable for front or rear panel
mounting as well as free hanging
applications
• UL recognized File nr.: E238675
• CSA certified LR54977
Performance characteristics
Operating
temperature: -55°C to +125°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: Min. 5000 matings
cycles
Vibration 5-50Hz, 0,5 dA; 8
resistance: hours axis
Thermal 5 cycles -55°C to
shock: +105°C
Humidity: 10 days at 85% RH,
+85°C
Construction
Connector body and strain relief:
Glass filled thermoplast UL94-V0
Colour: black
Locking latch Stainless steel,
and hook: passivated
Compression
Spring: Music wire, Nickel plated
Lubricating pad: Polyurethane foam
Rivet: Brass, Tin plated
Strain relief screws: Steel, Cadmium plated
Contact accommodation
• “MBG” connectors accept TRIM TRIO size
16 removable snap-lock contacts (see
contact section)
• Contacts to be ordered seperately.
How to order
1P12MBGConnector family
Insert arrangement: 4, 12, 19, 30, 46 positions
Body variation: P: Plug body
R: Receptacle body
S: Strain relief
Design variation: 1: Standard version with male contacts in receptacle
11 : Reversed version with male contacts in plug
84
Female plug connector for socket contacts (MBG--P1) - Standard version
Male plug connector for pin contacts (MBG--P11) - Reversed version
Part number Ø A ±0.25 B
±0.25
Female plug
Male plug
MBG4P1
MBG4P11 15.08 21.90
MBG12P1
MBG12P11 19.43 27.25
MBG19P1
MBG19P11 22.83 30.53
MBG30P1
MBG30P11 27.94 35.51
MBG46P1
MBG46P1 34.42 41.91
Panel mounting male receptacle connector for pin contacts (MBG--R1) - Standard version
Panel mounting female receptacle connector for socket contacts (MBG--R11) - Reversed version
Part number
Ø A ±0.25 B max. C
±0.18 D
±0.30 Ø E
±0.18 F max.Male receptacle
Female receptacle
MBG4R1
MBG4R11 23.90 18.08 31.45 37.36 20.07 29.46
MBG12R1
MBG12R11 32.49 26.54 30.76 36.86 24.64 34.93
MBG19R1
MBG19R11 32.44 26.54 34.04 40.13 27.86 38.10
MBG30R1
MBG30R11 35.61 28.65 38.00 44.91 33.10 43.31
MBG46R1
MBG46R11 42.24 35.13 46.94 54.05 39.70 49.61
5000 Mating Cycle
Plastic Connector
85
Strain relief (MBG--S1)
Part number Ø-C Ø-D E F
Cable range Ø G Cable range Ø G
side A side B
MBG4S1 12.2 15.0 20.1 5.3 8.51/6.35 –
MBG12S1 18.8 21.1 26.4 7.9 11.30/7.65 14.99/11.38
MBG19S1 21.3 24.4 29.0 9.4 13.08/8.66 17.53/13.12
MBG30S1 26.7 29.0 34.5 16.3 19.02/15.88 22.86/19.05
MBG30S2 26.7 29.0 34.5 15.9 12.67/10.01 15.85/12.70
MBG46S1 Not available
Insert arrangements and moulded-in contact identification
Contact identification positions shown are for mating face of plug and wiring face of receptacle.
5000 Mating Cycle
Plastic Connector
86
Panel cut-out dimensions for receptacle - Standard version (MBG--R1)
Part number Fig. J K L M N
MBG4R1 1 20.86 27.41 18.08 31.45 10.16
MBG12R1 2 25.30 32.74 26.54 30.76 11.65
MBG19R1 2 28.50 35.89 34.04 13.32
MBG30R1 2 33.73 40.97 28.65 38.00 15.49
MBG46R1 2 40.36 47.22 35.13 46.94 18.85
Panel cut-out dimensions for receptacle - Reversed version (MBG--R11)
Part number Fig. J K L M N
MBG4R11 1 20.86 27.41 18.08 31.45 10.16
MBG12R11 2 25.30 32.74 26.54 30.76 11.65
MBG19R11 2 28.50 35.89 34.04 13.32
MBG30R11 2 33.73 40.97 28.65 38.00 15.49
MBG46R11 2 40.36 47.22 35.13 46.94 18.85
5000 Mating Cycle
Plastic Connector
87
Rectangular
Overview rectangular TRIM TRIO connectors
Rectangular TRIM TRIO connectors are a wide and versatile range that are offered in
many options from low cost plastic to top class metal solutions.
This section gives an overview on available rectangular connectors for:
1. Connectors with jackscrew locking using size 16 contacts (1.6mm).
- MSM – High performance cable connectors.
- MS0 – High performance boardmount connectors.
- V.35 – DTE/DCE interface connectors.
2. Connectors with lever locking using size 16 contacts (1.6mm).
- MSG – low profile version.
- MB – Robust version.
3. Connectors with quick mating feature using size 16 contacts (1.6mm).
- SMS – Cable connectors.
- SMS – Boardmount connectors.
- SMS – Low profile pinheader cable and boardmount connectors.
4. Mixed power / signal + heavy duty and drawer connectors using size 16 contacts (1.6mm).
- A range of connectors with contact arrangements offered with a mix of signal and power contacts up to 26 A.
- Robust heavy duty connectors.
- Drawer connector.
88
Notes
Rectangular
89
High Performance Hyfen
Rectangular Cable Connectors
MS-M SERIES
Description
MSM rectangular connectors offers an
extremely reliable, rugged, and versatile
connection system .
They are a range of multiway connectors
available in 9 sizes from 9 to 75 positions.
MS-M cable connectors can be offered with
a full range of hardware and accessories.
Guiding pins and sockets, turnable
jackscrews, a variety of cable hoods, pin
protection shrouds and discrimination pins
make this connector range a truly versatile
system.
Features and benefits
• Connectors supplied pre-assembled
except for panel mount versions.
• Available in 14-20-26-34-42-50-75 and
104 positions.
• 34 contact positions suitable for
V.35 applications (see V.35 section)
• Full range of accessories available
including hoods, strain relief clamps,
guide pins, jackscrews and pin protection
shrouds.
• MS-M hyfen complies with NFC 93426
- HE 621-622 and MIL-C-28748
specifications.
• UL recognized File Nr.: E238675
Performance characteristics
Operating
temperature: -55°C to +125°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: 500 matings and
unmatings.
Vibration Per MIL-STD 202
resistance method 204
Shock: Per MIL-C-STD 202
method 207
Construction
Connector Material : Glass filled Phenolic
Flammability rating : UL94-V0
Hoods: Aluminium alloy
gold chromate or anodized
Polyamide 6.6 - black - UL94-V2
Cable clamps: Stainless steel
Polarizing hardware: Brass nickel plated
Shrouds: Aluminium alloy
gold chromate or anodized
Contact accommodation
• “MS-M” Hyfen connectors accept TRIM
TRIO size 16 removable snap-lock
contacts (see contact section)
• Contacts to be ordered seperately.
How to order
MS
MS
34
34
P
P
M
M
12 4
12 0
S
S-
GE
--
16
--
Connector family
Contact arrangement
Type of housing: P: plug body for male contacts
R: Receptacle housing for female contacts
N° 16 contact
Design variation
Pin protection shroud
GE = plastic turnable jackscrews
Code for special variations
90
High Performance Hyfen
Rectangular Cable Connectors
Contact arrangement
The contact position identification letters or numbers shown in the above diagrams apply to
MS-M plug and receptacle connectors. Dimensionally, corresponding types of plug and receptacle
mouldings are the same and differ only in that the contact position lettering/numbering of the
plug (MS-PM) is a mirror image of that of the receptacle (MS-RM). Note that pins and/or sockets
can be used in either the plug or receptacle moulding.
Note: Contact identification is shown for wiring face of the receptacle and mating face at
plug connector.
91
High Performance Hyfen
Rectangular Cable Connectors
Panel mount connectors with guiding hardware (MS--M1GE00)
Connector
size
Part number
A B D E Fig.
Plug version for
male contacts
Receptacle version for
female contacts
9 MS9PM1GE00 MS9RM1GE00 25.4 33.3 20.5 9.5
1-2
14 MS14PM1(*)GE00 MS14RM1(*)GE00 23.8 31.8 20.1 11.7
18 MS18PM1GE00 MS18RM1GE00 25.4 33.3 20.5 14.2
20 MS20PM1(*)GE00 MS20RM1(*)GE00 31.75 39.65 27.95 11.7
26 MS26PM1(*)GE00 MS26RM1(*)GE00 33.3 41.3 27.2 15.0
34 MS34PM1(*)GE00 MS34RM1(*)GE00 42.8 50.8 35.7 19.05
42 MS42PM1(*)GE00 MS42RM1(*)GE00 50.55 58.65 42.95
50 MS50PM1(*)GE00 MS50RM1(*)GE00 57.95 65.85 50.85 18.95
75 MS75PM1(*)GE00 MS75RM1(*)GE00 28.1 1-3
(*) Complete part number with “S” for connector with protective shroud.
Panel mount connectors with fixed jackscrew hardware (MS--M58GE00)
Connector
size
Part number
A B D E Fig.
Plug version for
male contacts
Receptacle version for
female contacts
9 MS9PM58GE00 MS9RM58GE00 25.4 33.3 20.5 9.5
1-2
14 MS14PM58(*)GE00 MS14RM58(*)GE00 23.8 31.8 20.1 11.7
18 MS18PM58GE00 MS18RM58GE00 25.4 33.3 20.5 14.2
20 MS20PM58(*)GE00 MS20RM58(*)GE00 31.75 39.65 27.95 11.7
26 MS26PM58(*)GE00 MS26RM58(*)GE00 33.3 41.3 27.2 15.0
34 MS34PM58(*)GE00 MS34RM58(*)GE00 42.8 50.8 35.7 19.05
42 MS42PM58(*)GE00 MS42RM58(*)GE00 50.55 58.65 42.95
50 MS50PM58(*)GE00 MS50RM58(*)GE00 57.95 65.85 50.85 18.95
75 MS75PM58(*)GE00 MS75RM58(*)GE00 28.1 1-3
(*) Complete part number with “S” for connector with protective shroud.
92
High Performance Hyfen
Rectangular Cable Connectors
MS34 Cable connector with 1 piece metal suitcase hood (MS34--MEHM)
Cable connector with Alu die cast hood (MS-M157GE00)
Part number
Plug version for
male contacts
Receptacle version
for female contacts Description
MS34PMEHM MS34RMEHM Anodised hood, plastic strain relief and turnable hardware.
MS34PMSEHM MS34RMSEHM Shielded version with nickel plated hood, metal strain relief and turnable hardware
MS34PMEHMMET1 MS34RMEHMMET1 Version with spring loaded jackscrews
Connector size
Part number
ABCDE
max. F Fig.
Plug version for
male contacts
Receptacle version
for female contacts
50 MS50PM157GE00 MS50RM157GE00 57.95 65.85 73.0 56.0 20.0 22.2 1-2
75 MS75PM157GE00 MS75RM157GE00 57.95 65.85 73.0 56.0 25.0 31.2 1-3
(*) Complete part number with “S” for connector with protective shroud.
(*) Complete part number with “S” for connector with protective shroud.
93
High Performance Hyfen
Rectangular Cable Connectors
Cable connector without strain relief and turnable jackscrew hardware (MS-M007GE00)
Cable connector with metal butterfly hood and guiding hardware (MS--M120GE00)
Connector
size
Plug version for
male contacts
Receptacle version for
female contacts A B D E Fig.
9 MS9PM007GE00 MS9RM007GE00 25.4 33.3 20.5 9.5
1-2
14 MS14PM007(*)GE00 MS14RM007(*)GE00 23.8 31.8 20.1 11.7
18 MS18PM007GE00 MS18RM007GE00 25.4 33.3 20.5 14.2
20 MS20PM007(*)GE00 MS20RM007(*)GE00 31.75 39.65 27.95 11.7
26 MS26PM007(*)GE00 MS26RM007(*)GE00 33.3 41.3 27.2 15.0
34 MS34PM007(*)GE00 MS34RM007(*)GE00 42.8 50.8 35.7 19.05
42 MS42PM007(*)GE00 MS42RM007(*)GE00 50.55 58.65 42.95
50 MS50PM007(*)GE00 MS50RM007(*)GE00 57.95 65.85 50.85 18.95
75 MS75PM007(*)GE00 MS75RM007(*)GE00 28.1 1-3
(*) Complete part number with “S” for connector with protective shroud.
Connector
size
Part number
ABEG
max. HS
max.
R
max. Fig.
Plug version for
male contacts
Receptacle version
for female contacts
34 MS34PM120(*)GE00 MS34RM120(*)GE00 42.8 50.8 19.05 22.2 56.7 10 13 1-2
(*) Complete part number with “S” for connector with protective shroud.
94
High Performance Hyfen
Rectangular Cable Connectors
Notes
95
MSO SERIES
Description
The MSO series, derived from the MSM
series, is for straight or right-angled
application on a printed circuit board.
Pre-assembled MSO connectors with pin
or socket N(16 contacts are intermateable
with the existing MSM rectangular cable
connectors.
The N° 16 TRIM TRIO .0625” (1.6mm)
diameter contacts are available in either
solid machined or stamped and formed
versions.
The polarizing hardware can be delivered in
either guiding or jackscrew versions.
Features and benefits
• Connectors supplied pre-assembled with
dip solder contacts.
• Contacts available in solid machined or
stamped and formed version.
• Available in 9-18-34-50-75 positions.
• For right-angled versions, there is a choice
of 9-18 and 34 contact positions.
• 34 contact positions suitable for V.35
applications (see section V.35)
• Polarising hardware prevent mismating.
• UL94-V0 rated thermoplast.
Performance characteristics
Operating
temperature: -55°C to +125°C
Current rating: 5 Amp for stamped contacts
7.5 Amp for machined
contacts
Contact
resistance: 울 3 mΩ
Insulation
resistance: 5000 M min.
Test potential: 2000 VAC
Durability: 500 matings and unmatings.
How to order
Construction
Connector Material : Glass filled polysulfone
Flammability rating : UL94-V0
Polarizing hardware: Brass nickel plated
Contacts: High conductive copper alloy
Plating table
Plating for solid machined contacts:
No digit (std) = Min. 0.4 µ Gold all over,
over Nickel.
T = 3 - 5µ Tin all over
Plating for Stamped and formed contacts :
K9 (std) = Min. 0.4µ Gold in contact area,
3 - 5µ SnPb on solder tail.
T = 3 - 5µ Tin all over
Intermateability
• “MSO” with pre-assembled contacts are
intermateable with the “MSM” rectangular
cable connectors equipped with TRIM
TRIO crimp-type removable snap-lock
contacts.
Connector family MSO 34 M R G 58 SE1 K9
Contact arrangement
N° 16 contacts
Type of housing P:
R:
Plug body with male contacts
Receptacle body with female contacts
Contact termination K:
G:
straight dipsolder
Right angle dipsolder
Type of hardware 1:
58:
Guide pin and socket
Threaded jackscrew pin and socket
Design variation E1:
SE1:
Solid machined contacts
stamped and formed contacts
Plating indication
High Performance Rectangular
Boardmount Connectors
96
Straight boardmount with guiding hardware (MSO--M-K1--)
connector
size
Part number
ABC
Version with
solid machined contacts
Version with
stamped and formed contacts
male female male female
9 MSO9MPK1E1 MSO9MRK1E1 MSO9MPK1SE1K9 MSO9MRK1SE1K9 9.5 33.3 25.4
18 MSO18MPK1E1 MSO18MRK1E1 MSO18MPK1SE1K9 MSO18MRK1SE1K9 15 . 2
34 MSO34MPK1E1 MSO34MRK1E1 MSO34MPK1SE1K9 MSO34MRK1SE1K9 19.0 50.8 42.8
50 MSO50MPK1E1 MSO50MRK1E1 MSO50MPK1SE1K9 MSO50MRK1SE1K9 18.9 65.8 57.9
75 MSO75MPK1E1 MSO75MRK1E1 MSO75MPK1SE1K9 MSO75MRK1SE1K9 19.4
For other platings: See plating table. Other solder tail lengths on request Selective loading on request
Straight boardmount with jackscrew hardware (MSO--M-K58--)
For other platings: See plating table. Other solder tail lengths on request Selective loading on request
connector
size
Part number
ABC
Version with
solid machined contacts
Version with
stamped and formed contacts
male female male female
9 MSO9MPK58E1 MSO9MRK58E1 MSO9MPK58SE1K9 MSO9MRK58SE1K9 9.5 33.3 25.4
18 MSO18MPK58E1 MSO18MRK58E1 MSO18MPK58SE1K9 MSO18MRK58SE1K9 15 . 2
34 MSO34MPK58E1 MSO34MRK58E1 MSO34MPK58SE1K9 MSO34MRK58SE1K9 19.0 50.8 42.8
50 MSO50MPK58E1 MSO50MRK58E1 MSO50MPK58SE1K9 MSO50MRK58SE1K9 18.9 65.8 57.9
75 MSO75MPK58E1 MSO75MRK58E1 MSO75MPK58SE1K9 MSO75MRK58SE1K9 19.4
High Performance Rectangular
Boardmount Connectors
97
Right angle boardmount with guiding hardware (MSO--M-G1--)
connector
size
Part number
ABCDE F
Version with
solid machined contacts
Version with
stamped and formed contacts
male female male female
9 MSO9MPG1E1 MSO9MRG1E1 33.3 23.0 38.0 16.0 10.0 25.4
18 MSO18MPG1E1 MSO18MRG1E1 18.0
34 MSO34MPG1E1 MSO34MRG1E1 MSO34MPG1SE1K9 MSO34MRG1SE1K9 50.8 19.3 55.5 20.5 10.5 42.8
For other platings: See plating table. Other solder tail lengths on request Selective loading on request
Right angle boardmount with jackscrew hardware (MSO--M-G58--)
connector
size
Part number
ABCDE F
Version with
solid machined contacts
Version with
stamped and formed contacts
male female male female
9 MSO9MPG58E1 MSO9MRG58E1 33.3 23.0 38.0 16.0 10.0 25.4
18 MSO18MPG58E1 MSO18MRG58E1 18.0
34 MSO34MPG58E1 MSO34MRG58E1 MSO34MPG58SE1K9 MSO34MRG58SE1K9 50.8 19.3 55.5 20.5 10.5 42.8
For other platings: See plating table. Other solder tail lengths on request Selective loading on request
High Performance Rectangular
Boardmount Connectors
98
MSO recommended drilling hole pattern
Size 9
Size 18
High Performance Rectangular
Boardmount Connectors
99
MSO recommended drilling hole pattern
Size 34
Size 50 Size 75
High Performance Rectangular
Boardmount Connectors
10 0
Notes
High Performance Rectangular
Boardmount Connectors
10 1
V.35 - Interface connectors
V.35 DTE / DC E
Interface connectors
Description
The Telecommunications Standardization
Sector TSS V.35, formerly CCITT V.35
is the international standard termed
“Data Transmission at 48 Kbps using 60-
108 Khz Group-Band Circuits. It makes
use of a 34 contact connection system
specially designed to be used for DTE/
DCE that interface to high speed digital
carriers found in computer, modem and
telecommunication industries.
Being part of the TRIM TRIO wide range
of high reliable rectangular connectors,
MSO34 (boardmount connectors) and
MS34 (cable connectors) are in complete
compliance to this specification.
To meet this specification, insulators
have been manufactured with 34 contact
positions which can be loaded with the
international accepted N° 16 TRIM TRIO
.0625” (1.6mm) diameter contacts.
The boardmount connectors (MSO34) are
available in straight and right angle versions
equipped with either solid machined
or stamped and formed male / female
contacts.
The cable connectors (MS34) can be
offered with a full range of hardware and
accessories. Guiding pins and sockets,
turnable jackscrew system, different cable
hoods with strain relief, pin protection
shrouds and discrimination pins make this
connector range as complete as possible.
Features and benefits
• Complete compliance with International
Standards of ISO 2593 for TTS V.35
(formerly CCITT V.35) interfacing.
• In compliance with NFC 93426 - HE621-
622 and MIL-C-28748 specifications.
• UL recognised.
• UL94-V0 rated thermoplastic
• Boardmount connectors supplied pre-
assembled with dipsolder contacts in
either: - Male or female contacts.
- Machined or stamped and
formed contacts
- Straight or right angle
• Stamped and formed contacts have
selective tin plating on solder tails, thus
eliminating extra flux operations.
• Selective loading possible on request.
• Right angle version equipped with true
position location wafer.
• Hold-down feature available
Performance characteristics
Operating
temperature: -55°C to +125°C
Current rating: 5 Amp for stamped
contacts
7.5 Amp for machined
contacts
Contact resistance: ≤ 3mΩ
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: 500 matings and
unmatings.
Plating table
Plating for solid machined contacts:
No digit (std) = Min. 0.4µ Gold all
over, over Nickel.
T = 3 - 5µ Tin all over
Plating for Stamped and formed contacts :
K9 (std) = Min. 0.4µ Gold in contact
area, 3 - 5µ SnPb on solder
tail.
T = 3 - 5µ Tin all over
Construction
Material : Glass-reinforced thermoplastic
Flammability rating : UL94-V0
Polarising hardware: Brass nickel plated
Contacts: High conductive copper alloy
Performance characteristics
Operating
temperature: -55°C to +125°C
Insulation
resistatance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: 500 matings and
unmatings.
Vibration Per MIL-STD 202
resistance: method 204
Shock: Per MIL-STD 202
method 207
Contact accommodation
• “MS” Cable connectors accept TRIM
TRIO size 16 removable snap-lock
contacts (see contact section)
• Contacts to be ordered separately
Construction
Connector body: Glass-reinforced Phenolic
Flammability rating : UL94-V0
Cable hoods: Aluminium alloy or
Polyamide 6.6
Cable clamps: Stainless steel
Protection Shrouds: Aluminium alloy
Polarising hardware: Brass nickel plated
Technical data on MSO34
PC-Boardmount connectors
Technical data on MS34
Cable connectors
Intermateability
All the references mentioned are perfectly intermateable, provided that 1 mated pair exists
out of a plug half and a receptacle half.
Mated pairs can be made for following applications:
- Cable to cable
- Cable to panel
- Cable to straight or right-angled boardmount
10 2
V.35 - Interface connectors
How to order
MSO 34 M R G 58 SE1 K9Connector family
Contact arrangement
N° 16 contacts
Type of housing P: Plug body with male contacts
R: Receptacle body with female contacts
Contact termination K: straight dipsolder
G: Right angle dipsolder
H: Reversed version
Type of hardware 1: Guide pin and socket
58: Threaded jackscrew pin and socket
Design variation E1: Solid machined contacts
SE1: Stamped and formed contacts
SL1: Metal bracket
SEH1: Hold down rivets
Plating indication
MS034 recommended drilling hole pattern
Size 34
10 3
V.35 - Interface connectors
MSO34 Right-angled boardmount connectors
Part number
Version with Version with Description
solid machined contacts stamped and formed contacts
MSO34MPG1E(*)1 MSO34MPG1SE(*)1K9 Guide pin, guide socket and male contacts
MSO34MRG1E(*)1 MSO34MRG1SE(*)1K9 Guide pin, guide socket and female contacts
MSO34MPG58E(*)1 MSO34MPG58SE(*)1K9 Jackscrew pin, jackscrew socket and male contacts
MSO34MRG58E(*)1 MSO34MRG58SE(*)1K9 Jackscrew pin, jackscrew socket and female contacts
For other platings: See plating table Other solder tail lengths on request Selective loading on request
(*) Complete part number with “H” for connector with hold down rivets
MSO34 Straight boardmount connectors
Part number
Version with Version with Description
solid machined contacts stamped and formed contacts
MSO34MPK1E1 MSO34MPK1SE1K9 Guide pin, guide socket and male contacts
MSO34MRK1E1 MSO34MRK1SE1K9 Guide pin, guide socket and female contacts
MSO34MPK58E1 MSO34MPK58SE1K9 Jackscrew pin, jackscrew socket and male contacts
MSO34MRK58E1 MSO34MRK58SE1K9 Jackscrew pin, jackscrew socket and female contacts
For other platings: See plating table Other solder tail lengths on request Selective loading on request
10 4
V.35 - Interface connectors
Part number
Version with Description
stamped and formed contacts
MSO34MPH1SL1K9 Guide pin, guide socket and male contacts
MSO34MRH1SL1K9 Guide pin, guide socket and female contacts
MSO34MPH58SL1K9 Jackscrew pin, jackscrew socket and male contacts
MSO34MRH58SL1K9 Jackscrew pin, jackscrew socket and female contacts
For other platings: See plating table Other solder tail lengths on request Selective loading on request
MSO34 Right-angled boardmount connectors – Reversed version with metal brackets
MSO34 Right-angled boardmount connectors – Standard version with metal brackets
Part number
Version with Description
stamped and formed contacts
MSO34MPG1SL1K9 Guide pin, guide socket and male contacts
MSO34MRG1SL1K9 Guide pin, guide socket and female contacts
MSO34MPG58SL1K9 Jackscrew pin, jackscrew socket and male contacts
MSO34MRG58SL1K9 Jackscrew pin, jackscrew socket and female contacts
For other platings: See plating table Other solder tail lengths on request Selective loading on request
10 5
V.35 - Interface connectors
MS34 Cable connectors with cable clamp
Part number
Version with Version with Description
male contacts female contacts
MS34PM117(*)GE00 MS34RM117(*)GE00 Guide pin, guide socket and cable clamp
MS34PM127(*)GE00 MS34RM127(*)GE00 Jackscrew pin, jackscrew socket and cable clamp
MS34PM107(*)GE10 MS34RM107(*)GE10 Turnable jackscrew pin, turnable jackscrew socket and cable clamp.
(*) Complete catalogue number with “S” for connector with protective shroud.
MS34 Cable connectors with metal butterfly hood
Part number
Version with Version with Description
male contacts female contacts
MS34PM120(*)GE00 MS34RM120(*)GE00
Guide pin, guide socket and butterfly hood.
MS34PM140(*)GE00 MS34RM140(*)GE00
Jackscrew pin , jackscrew socket and butterfly hood.
MS34PM124(*)GE00 MS34RM124(*)GE00
Turnable jackscrew pin, turnable jackscrew socket and butterfly hood.
MS34PM1(*)GE00 MS34RM1(*)GE00
Guide pin and guide socket. No strain relief hood
MS34PM58(*)GE00 MS34RM58(*)GE00
Jackscrew pin and jackscrew socket. No strain relief hood.
MS34PM007(*)GE00 MS34RM007(*)GE00
Turnable jackscrew pin and turnable jackscrew socket. No strain relief hood.
(*) Complete catalogue number with “ S “ for connector with protective shroud.
10 6
V.35 - Interface connectors
MS34 Cable connectors with plastic suitcase hood
Part number
Version with Version with Description
male contacts female contacts
MS34PMEH2(*) MS34RMEH2(*)
Guide pin, guide socket and plastic suitcase hood.
MS34PMEH3(*) MS34RMEH3(*)
Jackscrew pin, jackscrew socket and plastic suitcase hood.
MS34PMEH0(*) MS34RMEH0(*)
Turnable jackscrew pin, turnable jackscrew socket and plastic suitcase hood.
(*) Complete catalogue number with “S” for connector with protective shroud.
MS34 Cable connectors with metal suitcase hood
Part number
Version with Version with Description
male contacts female contacts
MS34PMEHM(*) MS34RMEHM(*) Anodised hood, plastic strain relief and turnable hardware.
MS34PMSEHM(*) MS34RMSEHM(*) Shielded version with nickel plated hood, metal strain relief and
turnable hardware.
(*) Complete catalogue number with “ S “ for connector with protective shroud.
MS34PMEHMMET1 MS34RMEHMMET1 Version with spring loaded jackscrews
10 7
High Performance Low Profile
Rectangular Connectors
MSG SERIES
Description
MSG Series connectors is a 50 and 59
position low profile, compact design
rectangular I/O connector.
MSG has been developed for industrial and
railway control equipments which require a
easy handling and high density connector.
In addition to its panel mount version, a
PCB mount version has been especially
designed to fit 19 inch Euro-rack system.
Features and benefits
• Connectors supplied pre-assembled.
• Available in 50 and 59 contact versions.
• PCB mount version fully equipped with
male contacts. Selective contact loading
optional.
• Accessories : polarizing screws
(receptacle)
polarizing plate (plug)
dust cap (plug)
Performance characteristics
Operating
temperature: -55°C to +125°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Current 7.5A - cable to PCB
rating: 13A - cable to cable
Creepage 2.5mm (50 positions)
distance: 2.2mm (59 positions)
Durability: 500 matings and
unmatings.
Vibration Per JIS-C STD 0040
Salt Spray: Per JIS-C STD 0023
Construction
Connector Material : Glass filled
thermoplast
Flammability rating : UL94-V0
Hoods, skirts : Steel, nickel plated
Cable clamps: Steel, nickel plated
Guiding hardware: Stainless steel
Contacts receptacle : Copper alloy
(Au over Ni)
Contact accommodation
• “MSG” Rectangular connectors accept
TRIM TRIO size 16 crimp-type removable
contacts (see contact section)
• For the plug connector and the panel
mount receptacle, contacts have to be
ordered separately.
How to order
Number of
contacts Part number Description
59
MSG59P-L11 Plug for cable up
MSG59P-L21 Plug for cable down
MSG59R-PL110 Panel mount receptacle
MSG59R-RL111 Right angle PCB mount receptacle without flange
MSG59R-FL111 Right angle PCB mount receptacle with flange
50 MSG50P-L11 Cable plug
MSG50RG-L111 Right angle PCB mount receptacle with flange
10 8
High Performance Low Profile
Rectangular Connectors
Plug connector with metal hood (MSG59P-L11)
Panel mount receptacle (MSG59RP-L110)
10 9
High Performance Low Profile
Rectangular Connectors
Right angle PCB mount receptacle without flange (MSG59RR-L111)
Right angle PCB mount receptacle with flange (MSG59RF-L111)
110
High Performance Low Profile
Rectangular Connectors
MSG59 recommended drilling hole pattern (for PCB) (MSG59RR-L111, M S G59RF-L111)
MSG59 recommended panel cut-out (front mount) (MSG59RR-L110)
MSG59 recommended for front mount (MSG59RR-L111, M S G59RF-L111)
Polarizing hardware
Plug side
Receptacle side
111
(MSG50P-L11)
(MSG50RF-L111)
High Performance Low Profile
Rectangular Connectors
112
(MSG50RF-L111)
(MSG50RF-L111)
High Performance Low Profile
Rectangular Connectors
113
Robust Lever
Locking Connector
MB SERIES
Description
• 52 contact, rectangular, one action lever
locking connector
• Same receptacle can be front or rear
mounted
• 2 cable clamp orientations available:
perpendicular or parallel to mating face
• Anti Jack knife system, guide plate on
plug and wide entry docket contact for a
smooth and reliable mating
• Adapted to shielded cable
• Easy assembly
Application
• Signalling
Mechanical
• Hood: Steel, Nickel plated
• Lever: stainless steel
• Grip and insulator: glass filled PBT
• Contact body: copper
• Contact plating: consult us
• Endurance: 500 mating/unmating
operations
• Vibration: per JIS C 0040
Electrical
• Withstanding voltage 2000 Veff
• Insulation resistance: 5000M
• Current rating: 13A
• Contact accommodation: standard TRIM
TRIO size 16 contacts
Environmental
• Temperature range: -55°C + 125°C
• Flammability rating: UL94V0
How to order
Receptacle
Basic series MB 52 R -L 1 1 0
Number of contacts 52
Receptacle:
Lever type:
Contact type: 1: TRIM TRIO contact
Cable clamp: 1: Lever down; 2: Lever up
Variation: 0: contacts to be ordered separately
Plug
Basic series MB 52 P -L 1 1 0
Number of contacts 52
Plug
Lever
Cable clamp: 1: Lever down; 2: Lever up
Cable direction 1: Parallel; 2: Perpendicular to mating face
Variation 0
114
Robust Lever
Locking Connector
Dimensions
Plug MB52P-L120
Receptacle MB52R-L110
Panel cut
Rear mount
Front mount
31 ± 0,2
95,5 ± 0,2
20 ± 0,2
85 ± 0,2
88,1 ± 0,2
115
Plastic Panel and Cable
Connectors
SMS - QIKMATE
SERIES
Description
The versatile “ SMS “ Qikmate panel
and cable connectors are a highly cost-
effective system approach to solving the
constant demand for more cost effective
interconnection techniques.
It is a range of multiway connectors using
N° 16 TRIM TRIO .0625” (1.6mm) diameter
contacts and available in 10 contact
arrangements from 2 to 36 positions.
Having no additional hardware, Panel
receptacle connectors snap and lock
into panel cutouts and cable plugs quick
connect and disconnect with positive
retention locks.
Cable plug connectors also feature pin-
protection skirts, positive polarisation and
can be supplied with or without integrated
strain relief hoods.
Cable receptacle connectors (only
with integrated strain relief hoods) are
developed to mate with cable plug
connectors thus offering solutions for cable
to cable applications.
Features and benefits
• Available in 10 contact arrangements.
• Self mountable panel receptacle with
positive housing retention.
• Cable plugs with retaining latches for
positive locking.
• Cable plug has pin protection skirt to
prevent damage of male contacts
• Positive polarization keys prevent
mismating.
• Cable plug and receptacle have integrated
strain relief hood which can take a wide
range of cables.
• Cable plug and receptacle have
discrimination cavities in between contact
cavities, thus offering discrimination
without contact loss.
• UL recognized File Nr.: E238675
Performance characteristics
Operating
temperature: -55°C to +105°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: 500 matings and
unmatings.
Construction
Material : Polyamide 6.6
Flammability rating : UL94-V2
Contact accommodation
• “SMS” Qikmate connectors accept
TRIM TRIO size 16 removable snap-lock
contacts (see contact section)
• Contacts to be ordered seperately.
How to order
SMS
SMS
12
12
PDH1
P1
Connector family
Contact arrangement
Body variation: R1: Panel mount receptacle
P1: Cable plug without strain relief hood
PDH1: Cable plug with integrated strain relief hood
RDH1: Cable receptacle with integrated strain relief hood
116
Plastic Panel and Cable
Connectors
Contact arrangements for cable plug connectors (SMS--P1 and SMS--PDH1)
Contact identifications shown are for mating face. Contact identifications of wiring face are identical as shown on the receptacle arrangements
117
Plastic Panel and Cable
Connectors
Contact arrangements for cable and panel mount receptacle connectors (SMS--R1 and SMS--RDH1)
Contact identifications shown are for mating face. Contact identifications of wiring face are identical as shown on the plug arrangements
118
Plastic Panel and Cable
Connectors
SMS - Standard Qikmate intermateability chart
(ONLY IN SIZES
3, 6, 12 AND 18)
119
Plastic Panel and Cable
Connectors
Panel mount receptacle (SMS--R1)
Part number Number of A B C max. J ±0.13 K
±0.13
contact pos.
SMS2R1 2 11.0 11.4
SMS3R1 3 16.2 5.8 15.2 16.5 11.6
SMS4R1 4 21.2 21.7
SMS6R1 6 10.9 20.3 16.5 16.7
SMS9R1 9 16.0 25.4 21.6
SMS12R1 12 16.2 21.1 30.5 26.7
SMS15R1 15 26.2 35.6 16.7 31.8
SMS18R1 18 31.2 40.6 36.9
SMS24R1 24 21.2 21.7
SMS36R1 36 46.6 21.1 30.5 47.1 26.7
Cable plug without strain relief hood (SMS--P1)
Part number Number of A C max.
contact pos.
SMS2P1 2 15 . 0
SMS3P1 3 18.6 17.8
SMS4P1 4 23.7
SMS6P1 6 22.9
SMS9P1 9 27.9
SMS12P1 12 18.6 33.0
SMS15P1 15 38.1
SMS18P1 18 43.2
SMS24P1 24 23.7
SMS36P1 36 49.1 33.0
0,75
2,3
12 0
Plastic Panel and Cable
Connectors
Cable receptacle with integrated strain relief hood ( SMS--RDH1 )
Part number Number of Number of A B C D H Cable Recommen-
contact disrimi- ded unirap
pos. nation pos. range cable tie
SMS2RDH1 2 0 31.6 64.8 11.1 0.5 - 8.4
SMS3RDH1 3 0 35.1 9.9 69.0 16.2 49..2 0.8 - 7.3 TF4D
SMS4RDH1 4 0 38.2 74.4 21.2 1.5 - 10.0
SMS6RDH1 6 2 34.6 15.0 72.6 50.9 1.7 - 9.2
SMS9RDH1 9 4 35.8 20.0 75.3 52.2 3.9 - 14.3
SMS12RDH1 12 6 38.1 25.1 72.0 16.2 52.7 4.0 - 15.0
SMS15RDH1 15 8 35.9 30.2 81.3 55.2 5.0 - 16.2 TF5D
SMS18RDH1 18 10 36.1 35.3 5.8 - 20.3
SMS24RDH1 24 15 39.7 90.4 21.2 57.2 7.1 - 20.4
SMS36RDH1 36 24 54.6 25.1 128.0 46.6 63.3 8.8 - 24.5
Cable plug with integrated strain relief hood ( SMS--PDH1 )
Part number Number of Number of A B C D H Cable Recommen-
contact disrimi- ded unirap
pos. nation pos. range cable tie
SMS2PDH1 2 0 39.5 64.8 14.1 0.5 - 8.4
SMS3PDH1 3 0 43.0 16.4 69.0 18.6 57.1 0.8 - 7.3 TF4D
SMS4PDH1 4 0 46.1 74.4 23.7 1.5 - 10.0
SMS6PDH1 6 2 42.5 21.5 72.6 58.8 1.7 - 9.2
SMS9PDH1 9 4 43.7 26.7 75.3 60.1 3.9 - 14.3
S M S 12 P D H 1 12 6 46.0 31.7 72.0 18.6 60.6 4.0 - 15.0
S M S 15 P D H 1 15 8 43.8 36.7 81.3 63.1 5.0 - 16.2 TF5D
S M S 18 P D H 1 18 10 44.0 41.8 5.8 - 20.3
SMS24PDH1 24 15 47.6 90.4 23.7 65.1 7.1 - 20.4
SMS36PDH1 36 24 62.5 31.7 128.0 49.1 71.2 8.8 - 24.5
12 1
Plastic Panel and Cable
Connectors
Accessories for standard Qikmate connectors
Pin protection shroud for panel mount receptacle (SMS--CSB1)
When pins are inserted into the panelmount
receptacle half (SMS--R1) of the QIKMATE
connector, an optional pin protection
shroud can be installed.
The shroud is mounted at the same time
as the receptacle by holding the shroud
against the mating side of the panel with
both cutouts lined up. The receptacle is
then inserted in place, trapping the shroud
between the receptacle and panel. The use
of the pin protection shroud reduces the
allowable thickness of the panel from 2.3 to
1.6 mm max.
Strain relief hoods
(SMS—H1)
Part number Number of contact A B
positions
SMS2CSB1 2 19.8
SMS3CSB1 3 23.4 18.8
SMS4CSB1 4 28.4
SMS6CSB1 6 23.9
SMS9CSB1 9 29.0
S M S 12 C S B 1 12 23.4 34.0
S M S 15 C S B 1 15 39.1
S M S 18 C S B 1 18 44.2
SMS24CSB1 24 28.4
SMS36CSB1 36 54.1 34.0
Discrimination pins
For discrimination pins on both standard Qikmate and Qikmate Pin Headers cable and boardmount:
See accessories section.
Separate strain relief hoods are available for all standard plugs SMS—P1.
The hoods consist of identical halves that snap into position on the plug and are secured in
place with the cable tie drawn tightly around the cabe entry collar.
Catalog numbers designate a complete hood (2 halves) SMS—H1
The cable tie is not included (TF4D – TF5D)
Two three and four position hoods are single piece units
12 2
Plastic Panel and Cable
Connectors
Notes
12 3
Plastic PC Boardmount
Connectors
SMS - BOARDMOUNT
QIKMATE SERIES
Description
These PC boardmount connectors enable
QIKMATE and preassembled TRIM TRIO
contacts to be PC board mounted, using
conventional solder production techniques.
They will then mate and latch with the
standard QIKMATE plugs.
Straight boardmount QIKMATE is available
in 10 insert arrangements from 2 to 36
positions.
Right-angled boardmount QIKMATE is
available in 3, 6, 12 and 18 positions.
All boardmount connectors are supplied
fully loaded with pin or socket contacts,
either in solid machined or stamped and
formed contacts.
Stamped and formed contact have
selective tin plating on the solder tails, thus
eliminating flux operations.
Features and benefits
• Straight versions available in 10 contact
arrangements from 2 to 36 positions
• Right-angled versions available in 3, 6, 12
and 18 positions.
• All versions are available with:
- Pin or socket contacts
- Stamped and formed or solid machined
contacts.
• Some boardmount connectors have
discrimination cavities in between contact
cavities, thus offering discrimination
without contact loss.
• UL recognized File Nr.: E238675
Performance characteristics
Operating
temperature: -55°C to +125°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Current rating: 5 Amp for stamped
contacts
7.5 Amp for machined
contacts
Durability: 500 matings and
unmatings.
Construction
Connector body: Glass filled thermoplast
UL94-V0
Contacts: High conductive copper alloy
Plating table
Plating for solid machined contacts:
No digit (std) = Min. 0.4µ Gold all over,
over Nickel.
T = 3 - 5µ Tin all over
Plating for Stamped and formed contacts :
K9 (std) = Min. 0.4µ Gold in contact
area, 3 - 5µ Tin on solder tail.
T = 3 - 5µ Tin all over
Intermateability
• “SMS” Qikmate boardmount connectors
with preassembled TRIM TRIO size 16
boarmount contacts are intermateable
only with the “SMS” Qikmate cable plug
connectors equipped with TRIM TRIO
crimp type removable snap-lock contacts
(see contact section)
How to order
SMS
SMS
3
3
GE
SE
12
12
–
K9
Connector family
Contact arrangement
Contact type: GE: Solid machined contacts
SE: Stamped and formed contacts
Design variation: 3: Straight boardmount with female contacts
4: Straight boardmount with male contacts
5: Right angle boardmount with female contacts
6: Right angle boardmount with male contacts
Plating indication
12 4
Plastic PC Boardmount
Connectors
Straight boardmount with female contacts (SMS--GE3 / SMS--SE3K9)
Part number Part number Number of Number of A B C D E
Solid machined Stamped and contact pos. discrimination
contacts formed contacts pos.
SMS2GE3 SMS2SE3K9 2 0 11.0 - 19.1
SMS3GE3 SMS3SE3K9 3 0 16.2 14.0 10.2 5.9
SMS4GE3 SMS4SE3K9 4 0 21.3 15.2
SMS6GE3 SMS6SE3K9 6 0 19.2 10.9
SMS9GE3 SMS9SE3K9 9 4 24.2 16.0
SMS12GE3 SMS12SE3K9 12 0 16.2 29.2 10.2 13.4 21.1
SMS15GE3 SMS15SE3K9 15 8 34.3 26.1
SMS18GE3 SMS18SE3K9 18 10 39.4 31.2
SMS24GE3 SMS24SE3K9 24 0 21.2 15.2
SMS36GE3 SMS36SE3K9 36 0 46.5 15.2 54.6 20.9
For other platings: see plating table
Straight boardmount with male contacts (SMS--GE4 / SMS--SE4K9)
Part number Part number Number of Number of A B C D E
Solid machined Stamped and contact pos. discrimination
contacts formed contacts pos.
SMS2GE4 SMS2SE4K9 2 0 11.1 - 19.1
SMS3GE4 SMS3SE4K9 3 0 16.2 14.0 10.2 5.9
SMS4GE4 SMS4SE4K9 4 0 21.3 15.2
SMS6GE4 SMS6SE4K9 6 0 19.2 10.9
SMS9GE4 SMS9SE4K9 9 4 24.2 16.0
SMS12GE4 SMS12SE4K9 12 0 16.2 29.2 10.2 13.4 21.1
SMS15GE4 SMS15SE4K9 15 8 34.3 26.1
SMS18GE4 SMS18SE4K9 18 10 39.4 31.2
SMS24GE4 SMS24SE4K9 24 0 21.2 15.2
SMS36GE4 SMS36SE4K9 36 0 46.5 15.2 54.6 20.9
For other platings: see plating table
12 5
Plastic PC Boardmount
Connectors
Right angle boardmount with female contacts (SMS--GE5 / SMS--SE5K9)
Part number Part number Number of Number of A B C D E F G
Solid machined Stamped and contact pos. discrimination
contacts formed contacts pos.
SMS3GE5 SMS3SE5K9 3 0 16.5 20.5 30.2 24.2 16.2 6.8
SMS6GE5 SMS6SE5K9 6 0 19.0 14.4 24.5 11.9
SMS12GE5 SMS12SE5K9 12 6 21.6 29.5 35.2 29.2 21.2 17.2
SMS18GE5 SMS18SE5K9 18 10 45.4 39.4 31.2
For other platings: see plating table
For availability on SMS18, consult factory
Right angle boardmount with male contacts (SMS--GE6 / SMS--SE6K9)
Part number Part number Number of Number of A B C D E F G
Solid machined Stamped and contact pos. discrimination
contacts formed contacts pos.
SMS3GE6 SMS3SE6K9 3 0 16.5 20.5 30.2 24.2 16.2 6.8
SMS6GE6 SMS6SE6K9 6 0 19.0 14.4 24.5 11.9
SMS12GE6 SMS12SE6K9 12 6 21.6 29.5 35.2 29.2 21.2 17.2
SMS18GE6 SMS18SE6K9 18 10 45.4 39.4 31.2
For other platings: see plating table
For availability on SMS18, consult factory
12 6
Plastic PC Boardmount
Connectors
Recommended PC-Board hole lay out for straight male and female boardmount connectors
Recommended PC-Board hole lay out for right-angled male and female boardmount connectors
12 7
Full Plastic Boardmount
Pin Headers and Plugs
SMS - Qikmate Pin
Header Series
Description
Qikmate Pin Header, available in 3, 4, 6, 9
and 10 positions, provides the additional
versatility of straight and right angle board
mounting.
Offered as an alternative to stacked
connectors, the in-line contact design of the
pin header provides the user with significant
PC board space savings.
The boardmount receptacle features
positieve polarization and a moulded
on pin protection skirt and is supplied
preassembled with straight or right angled:
• Solid machined or stamped and formed
PC board pin contacts.
• Coax PC board pin contacts.
The socket cable plug features positive
quick connect / disconnect latches and
is designed to accept N° 16 TRIM TRIO
.0625” (1.6mm) diameter socket contacts
for maximum contact protection.
Features and benefits
• Available in 3, 4, 6, 9 and 10 positions.
• In-line contact design, offering significant
PC board space savings.
• Boardmount connectors available
in straight and right-angled version
preassembled with:
- Solid machined or stamped and formed
pin contacts.
• - Coax pin contacts.
• UL recognized File Nr.: E238675
Construction
Connector body:
Glass filled thermoplast UL94-V0
Colour: Black
Contacts: High conductive copper alloy
Performance characteristics
Operating
temperature: -55°C to +125°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Current rating: 5 Amp for stamped
contacts
7.5 Amp for machined
contacts
Durability: 500 matings and
unmatings.
Intermateability
• “SMS” Socket plugs accept TRIM TRIO
size 16 removable snap-lock contacts (see
contact section)
• Contacts to be ordered seperately.
Plating table
Plating for solid machined contacts:
No digit (std) = Min. 0.4µ Gold all over,
over Nickel.
T = 3 - 5µ Tin all over
Plating for Stamped and formed contacts :
D28 = Min. 0.75µ Au over nickel.
D70 = Gold flash all over
TR29 = 1.2µ Pre-plated Tin all over.
Plating for coax contacts:
Z17 = Min. 0.75µ Au in contact area,
Flash on solder tail (inner)
Min 0.75µ Au in contact area,
Tin on solder tail (outer)
How to order
SMS
SMS
SMS
3
1
–
PH
CH
P3
9
9
9
TR29
Z17
–
Connector family
Contact arrangement
Contact type: PH: Pin header boardmount.
CH: Coax header boardmount.
P3: Socket cable plug for pin and coax boardmount header.
Design variation: 1: Right angle coax header boardmount with male contacts.
2: Straight coax header boardmount with male contacts
3: Right angle pin header boardmount with stamped male contacts
4: Straight pin header boardmount with stamped male contacts
GE6: Right angle pin header boardmount with machined male contacts
GE4: Straight pin header boardmount with machined male contacts
Plating indication
12 8
Full Plastic Boardmount
Pin Headers and Plugs
Right angle pin header boardmount with male contacts (SMS--PH3 / SMS--PHGE6)
Part number Part number Number of A B C
Stamped and Solid machined contact
formed contacts contacts positions
SMS3PH3TR29 SMS3PHGE6 3 31.2 25.4 19.3
SMS4PH3TR29 SMS4PHGE6 4 36.3 30.4 24.4
SMS6PH3TR29 SMS6PHGE6 6 46.5 40.6 34.5
SMS9PH3TR29 SMS9PHGE6 9 61.7 55.9 49.8
SMS10PH3TR29 SMS10PHGE6 10 66.8 61.0 54.9
For other platings: see plating table. Other solder tail lenghts on request
Straight pin header boardmount with male contacts (SMS--PH4 / SMS--PHGE4)
Part number Part number Number of A B C
Stamped and Solid machined contact
formed contacts contacts positions
SMS3PH4TR29 SMS3PHGE4 3 31.2 25.4 19.3
SMS4PH4TR29 SMS4PHGE4 4 36.3 30.4 24.4
SMS6PH4TR29 SMS6PHGE4 6 46.5 40.6 34.5
SMS9PH4TR29 SMS9PHGE4 9 61.7 55.9 49.8
SMS10PH4TR29 SMS10PHGE4 10 66.8 61.0 54.9
For other platings: see plating table. Other solder tail lenghts on request
12 9
Full Plastic Boardmount
Pin Headers and Plugs
Right angle coax header boardmount with male contacts (SMS--CH1Z17)
Part number Number of contact A B C
positions
SMS3CH1Z17 3 31.2 25.4 19.3
SMS4CH1Z17 4 36.3 30.4 24.4
SMS6CH1Z17 6 46.5 40.6 34.5
SMS9CH1Z17 9 61.7 55.9 49.8
SMS10CH1Z17 10 66.8 61.0 54.9
For plating spec.: see plating table.
Straight coax header boardmount with male contacts (SMS--CH2Z17)
Part number Number of contact A B C
positions
SMS3CH2Z17 3 31.2 25.4 19.3
SMS4CH2Z17 4 36.3 30.4 24.4
SMS6CH2Z17 6 46.5 40.6 34.5
SMS9CH2Z17 9 61.7 55.9 49.8
SMS10CH2Z17 10 66.8 61.0 54.9
For plating spec.: see plating table.
13 0
Full Plastic Boardmount
Pin Headers and Plugs
Socket cable plug for pin and coax boardmount header (SMS--P3)
Part number Number of contact D
positions
SMS3P3 3 16.0
SMS4P3 4 21.1
SMS6P3 6 31.2
SMS9P3 9 46.5
SMS10P3 10 51.6
Part number of contact E F
positions
3 10.18 25.40
4 15.24 30.48
6 25.40 40.64
9 40.64 55.88
10 45.72 60.96
Recommended PC-board hole layouts
13 1
Rectangular Mixed Power/
Signal
Description
Power connectors are connectors
to meet mixed power and signal
requirements.
This range of power connectors
is an extension of the long
established and popular TRIM
TRIO connector series shown
in this catalogue, but with the
advantage of offering a number of
additional features
Features and benefits
• Connectors suitable for mixed
power / signal application.
• Design in flexibility of TRIM TRIO.
The next page lists some of the mixed power / signal TRIM TRIO connector configurations.
It is intended to give you a general idea of our design capabilities.
As the creation of mixed power / signal TRIM TRIO connectors is an ongoing process, we advise you to
contact our nearest SOURIAU sales office if you have specific connector needs.
Our design flexibility is virtually unlimited, so we are always willing to consider any customised design.
Separate data sheets with more detailed technical info of the listed mixed power / signal TRIM TRIO
connectors are available.
Our Design flexibilities are virtually unlimited on:
• Contact arrangements
• Mixed contact lay-outs
• Power versions
• Hybrid contacts arrangements
• Filtered connectors
• High speed solutions
• Robust designs
• Higher corrosion withstandings
• ...
13 2
Rectangular Mixed Power/Signal
SMS 12 with 8 power &
4 standard TRIM TRIO contacts
Description
It is an SMS12 connector with a modified insert arrangement to
accept
8 power contacts #12 (2.4mm) and
4 TRIM TRIO #16 (1.6mm) signal contacts.
It also offers 4 extra discrimination cavities that accept the
SMSPKE3 discrimination pins.
Typical performance characteristics.
• Power contacts #12 (2.4mm) for up to 26 Amp
• Operating temp: -55°C to +150°C
• For furtur characteristics,(refer to technical drawings)
Available part numbers:
Contact accommodation
• Signal cavities accept the TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contacts section)
• Power cavities accept the 8291 power contacts (see power
contacts 8291 section)
• Contacts to be ordered seperately.
Part number Shell size Description
SMS12PDH2NA 12 Plug connector
SMS12RDH2NA Receptacle connector
For dimensions or others characteristics, refer to section SMS with corresponding shell size or refer to the technical drawings
SMS 12P24 with 8 power &
4 standard TRIM TRIO contacts
Description
It is an SMS15 connector with a modified insert arrangement to
accept
8 power contacts #12 (2.4mm) and
4 TRIM TRIO #16 (1.6mm) signal contacts.
Designed per VDE 0110
It also offers 4 extra discrimination cavities that accept the
SMSPKE3 discrimination pins.
Typical performance characteristics.
• Power contacts #12 (2.4mm) for up to 26 Amp
• Operating temp: -55°C to +150°C
• Per VDE 0110 (refer to technical drawings)
• For furtur characteristics,(refer to technical drawings)
Available part numbers:
Contact accommodation
• Signal cavities accept the TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contacts section)
• Power cavities accept the 8291 power contacts (see power
contacts 8291 section)
• Contacts to be ordered seperately.
Part number Shell size Description
SMS12P24PDH1NA 15 Plug connector
SMS12P24RDH1NA Receptacle connector
For dimensions or others characteristics, refer to section SMS with corresponding shell size or refer to the technical drawings
13 3
Rectangular Heavy Duty
Connectors
MS75 with die cast hood &
integrated shroud
Description
This MS75 connector features a robust cable hood with integrated
shroud and turnable jackscrews.
It is available for different cable diameters
Performance characteristics.
Refer to technical drawings
Available part numbers (consult factory):
Several part number are available with cable glands to accept
different cable diameters.
Contact accommodation
• “MS-M” Hyfen connectors accept TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contact section)
• Contacts to be ordered seperately
MS50 & MS75 with robust cable
hood & shroud
Description
This MS50 & MS75 connector features a robust cable hood with
shroud.
It also features enlarged turnable jackscrews to ease the connector
mating and unmating in extreme conditions.
Performance characteristics.
Refer to technical drawings
Available part numbers:
Contact accommodation
• “MS-M” Hyfen connectors accept TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contact section)
• Contacts to be ordered seperately
Part number Shell size Description
MS50RM157SGMSP2256 50 50 position cable connector with shroud
MS75RM157SGMSP2256 75 75 position cable connector with shroud
13 4
Rectangular Drawer Connector
DRW25 drawer connector with
2 DIN 41626 coax cavities
Description
DRW25 drawer connector is made for blind mating applications and
accept:
25 TRIM TRIO contacts and
2 DIN 41626 coax contacts
Performance characteristics.
Refer to technical drawings
Available part numbers:
Contact accommodation
• Signal cavities accept the TRIM TRIO size 16 crimp-type
removable snap-lock contacts (see contacts section)
• Coax cavities accept DIN 41626 coax contacts
(not available from Souriau)
• TRIM TRIO Contacts to be ordered seperately.
Part number Description
DRW25C2P1 25 + 2 Positions, female drawer plug.
DRW25C2R1 25 + 2 Positions, male drawer receptacle.
13 5
Monolink
Single Position Connector
The one-position connector
offers an unlimited wiring
versatility. It uses all Trim Trio
contacts.
Performance characteristics.
Operating Temperature: -55°C to +125°C
Durability: 500 Cycles
Vibration Resistance: Per MIL-STD-202,
method 204
Shock: Per MIL-STD-202,
method 207
Construction
Connector Body: Polyamide 6.6
Part number Description
RSCDEX2 Plug Body
RSMDEX1 Receptacle Body
Contact Accommodation
Quick disconnect cable splice accept:
• RM/RC Machined Contacts
• SM/SC Formed one-piece Contacts
• SM/SC Formed two-piece Contacts
• RMDX/RCDX Coaxial Contacts
Features and Benefits
• Locking with a positive snap
• Unmating force between 3 and 15 lbs.,
therefore locked until intentionally separated
• Molded-in serrations which improve grip on
both plug and receptacle while mating and
unmating
• Both parts cover the contacts entirley, to
prevent accidental damage to contacts
• White color makes coding for discrimination
purposes possilbe
• Removable crimp snap-in pin and socket Trim
Trio contacts
• Ideal for repairing co-axial cables
(RG178, RG179, RG187, RG188, etc.)
13 6
Contacts
Overview TRIM TRIO contacts
TRIM TRIO contacts are a wide and versatile range that are offered in many options
for crimp, coax and Fiber optic applications
This section gives an overview on available rectangular connectors for:
1. Size 16 contacts (1.6mm).
- RM/RC – High performance machined contacts.
- SM-M/SC-M – Stamped and formed contacts.
- RMDX/RCDX – Coax Contacts.
- Fiber optic contacts
2. Size 20 contacts (1.0mm).
- RM-W/RC-W – High performance machined contacts.
- SM-W/SC-W – Stamped and formed contacts.
3. 8291 power contacts.
- Size 12 contacts (2.4mm)
- Size 8 contacts (3.6mm)
13 7
Machined Crimp
Contacts size 16
How to order
–
–
K
K
(GE1)
(GE1)
23
23
M
M
16
16
(K) RM
(K) RC
Contact type: RM: Male contact bulk packing
RC: Female contact bulk packing
KRM: Male contact on plastic carrier strip
KRC: Female contact on plastic carrier strip
AWG Size: 16, 20, 24, 28
Size 16: .0625” (1.6mm) Diameter contacts
Design variation: Crimp barrel
Grounding contact:
Plating indication: See plating table
Packing quantity: No digit (std) : 50 pcs. bulk packing (RM/RC)
: 2000 pcs on reel (KRM/KRC)
1000 : 1000 pcs bulk packing (RM/RC)
RM/RC-M
Description
Size 16 RM/RC .063” (1.6mm) diameter
contacts are precision solid machined crimp
snap-in pin and sockets for heavy duty top
performance requirements.
Springs on both contacts are made of
spring-tempered, heat-treated, berylium
copper.
The socket inner spring supplies high
contact pressure to ensure low-resistance
contact between pin and socket. The
socket contact features closed entry to
prevent probe damage. Crimp barrels
have insulation grips for vibration support
and are provided with a cable stop and
inspection hole.
Features and benefits
• Made from high conductive copper alloy
with gold or tin over nickel plate finish.
• Heat-treated beryllium copper locking
springs assure proper locking and
alignment of contacts in the housing.
• Closed entry design on RC socket contact
to prevent probe damage.
• Contacts available in bulk packing
Performance characteristics
Current rating: 13 Amp
Contact resistance: 울 3 mΩ
Contact retention in body: 110 N min.
Individual insertion force: 3.5 N max.
Individual withdrawal force: 0.55 N min.
Construction
Contact body: High conductive copper
alloy.
Outer spring: Tempered, heat-treated,
beryllium copper.
Inner spring socket: Tempered, heat-treated,
plated beryllium copper.
Plating table
K (std) = Min. 0.4 µ Gold all over,over
Nickel
J = Gold flash all over, over Nickel
N = Min. 0.75 µ Gold all over,over Nickel
T = 3 - 5 µ Tin all over, over Nickel
Other platings on request
Connector accommodation
Any TRIM TRIO size 16 contact can
be used in any contact position in any
connector in the TRIM TRIO size 16
interconnection system.
• MS-M / MSG / MB
• SMS Qikmate
• UTG
• UTP
• UT0
• UTS
• UTV
• MBG
13 8
Machined Crimp Contacts size 16
Standard RM/RC crimp contacts: Contact size 16 - Pin diameter 1.6mm (.063”)
Dimensional table
Part number
Fig.
Wire size Max.
wire
dia.
Max.
insul.
dia.
Wire
strip
length
O.D. L1 L2
Pin contacts Fig. Socket contacts
Standard AWG mm2
RM28M1(*) 1 RC28M1(*) 6 30-28 0.05-0.08 0.55 1.1
4.8
1,90
26,2 18.2
RM24M9(*) 2 RC24M9(*) 7 26-24 0.13-0.20 0.8 1.6 2,55
RM20M13(*) 3RC20M13(*) 822-20 0.32-0.52 1.18 1.8 2,92
RM20M12(*) RC20M12(*) 2.2 2,92
RM16M23(*) 4RC16M23(*) 9 20-16 0.52-1.50 1.80
3.2 7.1 2,55
RM16M23GE1(*) RC16M23GE1(*) 9 27,2 19.7
RM14M50(*) 5 RC14M50(*) 10 16-14 1,5-2,5 2,05 3,10 26,2 18.2
RM14M30(*) 5 RC14M30(*) 10 16-14 1,5-2,5 2,28 3,10
(*) Plating indication : See plating table
For machined contact reeled on plastic carrier: put “K” in front of part number e.g. KRM16M23K
For grounding contacts (1 mm longer) add “GE1” to the part number (e.g. RM16M23GE1K)
For last make contacts (0,3 mm shorter) add “GE3” to the part number (e.g. RM16M23GE3K)
Crimptooling table
Hand crimp tooling for loose contacts Automatic crimp tooling
for contacts on strip
Size Hand tools MH860 M10S1 M8ND P100MAN (Press) Extraction
die set Positioner Locator Die set Stop Die set Left side Stripper tools
included setting bushing applicator unit
KRM/KRC
(not incl.) (not incl.) (not incl.) (not incl.) (not incl.) (not incl.)
28-1 4/6 S9 N24RT10 --
24-9 MH86164G 5/6 SL40 MLSP2763 Consult
20-12/13 Y16RCM 5/7 S10 N20RT30 MLSP2764 Factory RX2025GE1
16 -23 6/8 S3D1 SL39 N16RT21 or
16 -GE1 or MH86186 SL115 N16RT25 MLSP2765 RX2025GE2
14 -50 -- -- S3-14 SL39 -- -- – or
14 -30 AF8 + RX16D11D1
TP120 -- -- -- -- -- --
For detailed information on crimp tooling : See crimp tooling section
Special RM / RC contacts: Contact size 16 - Pin diameter 1.6mm (.063”)
Part number Wire size Post cross Length out Anti-
of rotating
Pin contacts Socket contacts Type AWG mm2 section TRIM TRIO bushing
A cavity part
number
RM16SEO(*) RC16SE4(*) Soldercup 16 - 20 1.50 - 0.52 ø1.7 3.5 -
RM20M12G4(*) RC20M12G4(*) Mini - wrap 28 - 30 0.08 - 0.05 ø 0.636 16.0 J1661
(*) Plating indication : See plating table.
13 9
Machined Contacts
PC Boardmount size 16
Nominal length (dim G) of dipsolder contacts out of connector (contacts to be ordered separately)
UTP0 / UTG0 wall mounting receptacle connectors
Connector size Pin contact Socket contact
RM20M12E8* RM20M12E83* RC20M12E8* RC20M12E83* RC20M12E84*
All sizes 5.2 10.3 5.2 10.4 13.9
UT00 wall mounting receptacle connectors
Connector size Pin contact Socket contact
RM20M12E8* RM20M12E83* RC20M12E8* RC20M12E83* RC20M12E84*
10 4 9.1 3.3 8.5 12.1
12 4 9.1 3.3 8.5 12.1
14 4 9.1 3.3 8.5 12.1
16 4 9.1 3.3 8.5 12.1
18 4 9.1 3.3 8.5 12.1
20 4.1 9.2 1.8 7 10.6
22 4.1 9.2 1.1 6.3 9.9
24 4.1 9.2 1.1 6.3 9.9
UT07 jam nut receptacle connectors
Connector size Pin contact Socket contact
RM20M12E8* RM20M12E83* RC20M12E84* RC20M12E85* RC20M12E86*
10 4.1 9.2 4.65 7.15 7.95
12 4.1 9.2 4.65 7.15 7.95
14 4.1 9.2 5.35 7.85 8.65
16 4.1 9.2 4.65 7.15 7.95
18 4.1 9.2 4.65 7.15 7.95
20 4.85 3.4 4.2
22 4.85 2.7 3.5
24 3.35 1.3 2.1
For recommended PC-Board hole lay out: Consult factory
* Plating indication: See (plating table)
* Plating indication: See (plating table)
* Plating indication: See (plating table)
14 0
Machined Contacts size 16
The RM/RC contact packing
50 pcs bulk packing (standard) 1000 pcs bulk packing Reeled contacts on plastic carrier (qty 2000 pcs)
The RM/RC contact principle
14 1
Stamped and Formed
Contacts size 16 One Piece
How to order
S6
S6
1
1
(L)
(L)
M
M
16
16
SM
SC
Contact type: SM: Male contact
SC: Female contact
AWG Size: 14, 16, 20, 24
Type of crimp barrel: American open crimp barrel
Packing: No digit: Contacts on strip (qty 3000 per reel)
L: Preformed loose piece contacts
Design variation 1 : Only wire crimp for size 14 and 16
: Wire + insulation crimp for sizes 20 and 24
11 : Wire + insulation crimp for size 16
Plating indication: See plating table
SM/SC-M
Description
Size 16 SM/SC .063” (1.6mm) diameter
contacts are two piece strip formed crimp
snap-in pin and sockets.
These contacts consist of a crimp body
made of high conductive copper alloy, and
a stainless steel retaining spring featuring
retention in the housing cavity and a closed
entry socket to prevent probe damage.
The contact with its open barrel is standard
available on srtip and packaged with 3000
pcs on reel. This reel packaging combined
with semi or even full automatic crimp
tooling provides the added advantage of a
lower installed cost.
Features and benefits
• Made from high conductive copper alloy
with gold or tin over nickel plate finish.
• Two piece construcion with dual purpose
spring which serves for contact retention
and protects the body against damage.
• Contacts available on reel (standard) and
in bulk packing (25 pcs).
• Suitable for high volumes and lower
installation cost.
Performance characteristics
Current rating: 13 Amp
Contact resistance: 울 6 mΩ
Contact retention in body: 65 N min.
Individual insertion force: 3.5 N max.
Individual withdrawal force: 0.55 N min.
Construction
Contact body: High conductive copper
alloy.
Outer spring: Stainless steel
Plating table
S6 = 0.75m Gold min. in contact area,
flash on crimp barrel over Nickel.
D70 = Gold flash all over, over Nickel.
TK6 = Preplated Tin all over.
Connector accommodation
Any TRIM TRIO size 16 contact can
be used in any contact position in any
connector in the TRIM TRIO size 16
interconnection system.
• MS-M / MSG / MB
• SMS Qikmate
• UTG
• UTP
• UT0
• MBG
• UTS
• UTV
Note:
Reeled contacts are for applicator with left
side feeding.
14 2
Stamped and Formed
Contacts size 16 One Piece
Standard SM/SC crimp contacts: Contact size 16 - Pin diameter 1.6mm (.063”)
Part number: contacts on strip
Part number: Loose piecesmn Wire size
Insulation Wire
Pin contacts Fig. Socket contacts Fig. AWG mm2 diameter strip length
SM24M1S6 1 SC24M1S6 2 26 - 24 0.13 - 0.25 0.89 - 1.58 4.0
SM24ML1S6 SC24ML1S6
SM20M1S6 3 SC20M1S6 4 22 - 20 0.35 - 0.50 1.17 - 2.08 4.0
SM20ML1S6 SC20ML1S6
SM16M1S6 5 SC16M1S6 6 18 - 16 0.80 - 1.50 3.0 6.35
SM16ML1S6 SC16ML1S6
SM16M11S6 7 SC16M11S6 8 18 - 16 0.80 - 1.50 2.0 - 3.0 4.65
SM16ML11S6 SC16ML11S6
SM14M1S6 9 SC14M1S6 10 14 2.0 - 2,5 3.2 6.35
SM14ML1S6 SC14ML1S6
Dimensional table
Hand crimp tooling for loose contacts Automatic crimp tooling for
contacts on strip
Extraction
Size tooling
Hand tools M8ND P100 MAN (Stripper - crimper)
die set included Die set Mini Applicator
(not included) (not included)
Crimptooling table
For other platings: See plating table.
24 Y16SCM2 (ratchet) N24RT11 MLS0318B
20 Y14SCM2 (not ratchet) N20RT29 MLS0555A
Y14MTV (ratchet)
16M(L)11 Y16SCM2 (ratchet) N16RT26 MLS0356A RX2025GE1
Y14SCM2 (not ratchet) SC10S1 or
16M(L)1 Y14SCM (ratchet) N16RT24 MLS1579 RX2025GE2
Y14MTV (ratchet) or
14 Y14SCM (ratchet) N14RT13 MLS1047 RX16D11D1
Y14MTV (ratchet)
For detailed information on crimp tooling : See crimp tooling section
14 3
SM/SC-M
- One Piece
Description
Economic one piece contacts are formed
of brass and available with tin or gold plate
finishes. Contacts accomodate No. 16
stranded through No. 26 solid or stranded.
They are supplied 3,000 to a reel and
installed with the Burndy UTM-2 installation
machine. These one-piece formed contacts
are rated to 5 amps.
Features and benefits
• Made from high conductive copper alloy
with gold or tin over nickel plate finish.
• Contacts available on reel (standard) and
in bulk packing (25 pcs).
• Suitable for high volumes and lower
installation cost.
Performance characteristics
Current rating: 5 Amp
Contact resistance: 울 7 mΩ
Construction
Contact body: High conductive copper
alloy.
Plating table
S6 = 0.75m Gold min. in contact area,
flash on crimp barrel over Nickel.
TK6 = Preplated Tin all over.
Connector accommodation
Any TRIM TRIO size 16 contact can
be used in any contact position in any
connector in the TRIM TRIO size 16
interconnection system.
• MS-M / MSG / MB
• SMS Qikmate
• UTG
• UTP
• UT0
• MBG
• UTS
• UTV
Stamped and Formed
Contacts size 16 One Piece
Dimensional table
Installation Tools
Pin contacts Socket
contacts
Wire Range
AWG
Insulation
Range
M8ND/Y8ND
Die Set
UTM-2 Crimp
Mechanism
Extraction
Tool
SM24M6S6
SM24M6TK6
SC24M62S6
SC24M62TK6
26 - 24
SOL / STR .038” - .062” N24RT-11 CM11G1
RX16D11-D1
SM20M6S6
SM20M6TK6
SC20M62S6
SC20M62TK6
20 - 22
SOL / STR .046” - .082” N20RT-29 CM11G1
SM16M6S6
SM16M6TK6
SC16M62S6
SC16M62TK6
16 - 18
STR — N16RT-24 CM11
SM16M16S6
SM16M6TK6
SC16M62S6
SC16M62TK6
16 - 18
STR .082” - .118” N16RT-26 CM27
14 4
Coaxial Contact Kits size 16
How to order
D28
D28
K10
K1
RMDX
RCDX
Contact type: RMDX = Male subminiature coax.
RCDX = Female subminiature coax.
Monocrimp design variation
Plating indication
RMDX/RCDX-K
Description
Size 16 RMDX/RCDX Monocrimp .0625”
(1.6mm) diameter contacts are one-piece
monocrimp subminiature coaxial contacts
to cover a wide range of subminiature
coaxial and twisted pair cables.
They provide cost effective solutions
in applications where a mix of signal,
power and coaxial cable terminations for
low frequency, shielded signal and high
frequency applications are needed.
Monocrimp one piece coaxial contacts offer
high reliability plus the economic advantage
of a 95% reduction in installation time over
conventional assembly methods currently
in use.
Features and benefits
• The monocrimp one-piece coaxial
contacts offer high reliability plus the
economic advantage of a 95% reduction
in installation time over conventional
assembly methods.
• This economy is achieved by
simultaneously crimping of both the inner
and outer conductor
Performance characteristics
Operating voltage between
inner / outer contact: 230 VDC
Test potential between
inner / outer contact 450 VAC 1 min.
Operating temperature: -55°C t0
+ 125°C
Contact retention in body: 65 N min.
Contact voltage drop a 1A: 30m V max.
Isolation at 30 MHZ: 140 db.
Construction
Inner and outer contacts: High conductive
copper alloy
Retaining spring: berylium copper
Insulating bushing: Polyamide 6.6
Plating table
Retaining spring: Nickel plated
Inner and outer contacts:
D28: 0.75 µ Gold min. over Nickel
Connector accommodation
Any TRIM TRIO size 16 contact can
be used in any contact position in any
connector in the TRIM TRIO size 16
interconnection system.
• MS-M / MSG / MB
• SMS Qikmate
• UTG
• UTP
• UT0
• MBG
14 5
Coaxial Contact Kits size 16
MULTIPIECE Subminiature coax - Male contact for coaxial cable
Type of
coaxial
cable
Contact for inner conductor
Inner female
contact
Part
number Die Set Stop
Bushing
Part
number Fig Part
number FigFig.
Crimp tool M10S1 Outer male
contact Hyring Crimp tool M10S1
Die
Set
Stop
Bushing
Extrac
tool
Contact for outer braid
RG161U
RG179A/U
RG179B/U
RG187U
RG174/U
RG188/U
Amphenol
21-598
RG178A/U
RG196U
S23D2 YOC074 4 RX2025
GE1
RFD26L1D28 2 SL46D2 RMDX602D28 1 YOC074 4 S22-1 SL47-1 RX16D11
S26D2 D1
YOC074 4
S23D2 +
RMDXB0553 3
Kit reference RMDXK10D28 includes RMDX602D28 + RFD26L1D28 + YOC074 + RMDXB0553 and are packed in plastic bag.
MULTIPIECE Subminiature coax - Female contact for coaxial cable
Type of
coaxial
cable
Contact for inner conductor
Inner male
contact
Part
number Die Set Stop
Bushing
Part
number Fig Part
number FigFig.
Crimp tool M10S1 Outer female
contact Hyring Crimp tool M10S1
Die Set Stop
Bushing
Extrac
tool
Contact for outer braid
RG161U
RG179A/U
RG179B/U
RG187U
RG174/U
RG188/U
Amphenol
21-598
RG178A/U
RG196U
YOC074 4 RX2025
S23D2 GE1
or
RMD26L1D28 2 S26D2 SL46D2 RCDX602D28 1 YOC074 4 S22-1 SL47-1
RX16D11
D1
YOC074 4
S23D2 +
RCDXB0551 3
Kit reference RCDXK1D28 includes RCDX602D28 + RMD26L1D28 + YOC074 + RCDXB0551 and are packed in plastic bag.
14 6
Coaxial Contact Kits size 16
MULTIPIECE Subminiature coax - Male contact for twisted pair cable
Type of
coaxial
cable
Contact for inner conductor
Inner female
contact
Part
number Die set Stop
bushing
Part
number Fig Part
number Fig Die set Stop
bushing
Fig.
Crimp tool M10S1 Outer male
contact Hyring Crimp tool M10S1 Extrac
tool
Contact for outer braid
2 #24 solid
or stranded
2 #26 str
2 #24
7/0,20 str.
MIL-W-76 or
MIL-W-16878
type B
#28 per
MIL-W-
81822/3
YORX090 4
YOC074 5 RX2025
RMDXB0553 3 GE1
YORX090 4 or
RFD26L1D28 2 S26D2 SL46D2 RMDX602D28 1 YOC074 5 S221 SL471
RMDXB0554 3 RX16D11D1
YORX090 4
YOC074 5
RMDXB0553 3
MULTIPIECE Subminiature coax - Female contact for twisted pair cable
Type of
coaxial
cable
Contact for inner conductor
Inner male
contact
Part
number Die set Stop
bushing
Part
number Fig Part
number Fig Die set Stop
bushing
Fig.
Crimp tool M10S1 Outer female
contact Hyring Crimp tool M10S1 Extrac
tool
Contact for outer braid
2 #24 solid
or stranded
2 #26 str
2 #24
7/0,20 str.
MIL-W-76 or
MIL-W-16878
type B
#28 per
MIL-W-
81822/3
YORX090 4
YOC074 5 RX2025
RCDXB0551 3 GE1
YORX090 4 or
RMD26L1D28 2 S26D2 SL46D2 RCDX602D28 1 YOC074 5 S221 SL471
RCDXB0552 3 RX16D11D1
YORX090 4
YOC074 5
RCDXB0551 3
14 7
Monocrimp Coaxial
Contacts size 16
How to order
D28
D28
36
36
RMDX60
RCDX60
Contact type: RMDX = Male subminiature coax.
RCDX = Female subminiature coax.
Multipiece coax kit K10 = Lit male coax.
K1 = Kit female coax.
Plating indication
RMDX/RCDX
Description
Size 16 RMDX/RCDX Multipiece
.0625” (1.6mm) diameter contacts are
subminiature coaxial contacts to cover a
wide range of subminiature coaxial and
twisted pair cables.
They are suitable in applications where
a mix of signal, power and coaxial cable
terminations for low frequency, shielded
signal and high frequency applications are
needed.
The contact consist of an inner pin/socket
and an outer male/female body.
The thermoplastic insulating bushing in
the outer body is designed to accept and
permanently retain the inner contact.
The outer ferrule hold the outer braid to
the outer contact and act as an insulating
support to ensure against bending and
vibrating stresses.
The inner and the outer conductor are
crimped individually, thereby enabling
inspection of both critical crimp points.
Features and benefits
• The inner and outer conductors are
crimped individually
• The thermoplastic insulating bushing in
the outer body is designed to accept and
permanently retain the inner contact.
• Outer ferrule hold the outer braid to the
outer contact and act as an insulating
support to ensure against bending and
vibration.
Performance characteristics
Operating voltage between
inner / outer contact: 230 VDC
Test potential between
inner / outer contact 750 VAC 1 min.
Operating temperature: -55°C to
+ 125°C
Contact retention in body: 65 N min.
Contact voltage drop a 1A: 25m V max.
Isolation at 30 MHZ: 140 db.
Construction
Inner and outer contacts: High conductive
copper alloy
Retaining spring: berylium copper
Insulating bushing: Polyamide 6.6
Plating table
Retaining spring: Nickel plated
Inner and outer contacts:
D28: 0.75µ Gold min. over Nickel
Connector accommodation
Any TRIM TRIO size 16 contact can
be used in any contact position in any
connector in the TRIM TRIO size 16
interconnection system.
• MS-M / MSG / MB
• SMS Qikmate
• UTG
• UTP
• UT0
• MBG
14 8
Monocrimp Coaxial
Contacts size 16
MONOCRIMP Subminiature coax
Part number
Male
Female
AWG
inner
conduct.
Cable
type
Coax dimensions
D
max
E F G A B C Die set
not incl.
stop
bushing
not incl.
Coax strip lengths Crimp tool M10S1
Extraction
tool
RMDX6050D28 - 2.64 2.11 1.70 0.30 5.1 8.9 S80
RCDX6050D28 30
RMDX6050D28 - 2.29 1.63 1.22 4.2 8.5 S87
RCDX6050D28
RMDX6032D28 28 - 2.90 2.29 1.91 0.38 11.7 S80
RCDX6032D28
RMDX6024D28 - 1.78 1.37 0.97 0.48 S82
RCDX6024D28
RMDX6032D28 RG174/U 2.92 2.24 1.52 0.48 5.1 6.35 S80 SL105 RX2025GE1
RCDX6032D28
RMDX6026D28 26 - 3.05 2.44 1.96 0.41 S82 OR
RCDX6026D28
RMDX6036D28 RG188A/U 2.79 0.51 11.7 S80 RX16D11D1
RCDX6036D28
RMDX6036D28 RG316/U 2.72 1.98 1.52
RCDX6036D28
* M10SG8 consists of die set, stop bushing and M10S1 tool
14 9
Monocrimp Coaxial
Contacts size 16
MONOCRIMP Twisted pair
Part number Cable strip lenghts Crimp tool
AWG Dia. outer M10S1
Male inner jacket Die set Stop Extraction
Female conduct. (single wire) A B C bushing tool
not incl. not. incl.
RMDX6019D28 26 (19 x 0.10) 1.25
RCDX6019D28 24 (7 x 0.20) 1.25 M10SG8* RX2025GE1
24 (19 x 0.13) 1.45 4.7 6.0 4.0 Crimping kit or
RMDX6031D28 26 (7 x 0.16) 0.70 S80 SL105 RX16D11D1
RCDX6031D28
* M10SG8 consist of die set, stop bushing and M10S1 tool.
15 0
Fiber Optic Contacts size 16
RM/RC POF
Description
Size 16 Fiber optic contacts are optical
contacts designed for the integration
of optical links in all TRIM TRIO cable
connectors.
The F.O. contacts are designed to
accommodate:
• Plastic Optical Fiber (POF)
1mm core and 2.2mm jacket
• Plastic Clad Fiber (PCF)
230 µm core and 2.2mm jacket
• Multimode Silica Fiber
50/125 µm type 1.5mm (or 900µm) jacket
Features and benefits
• Socket contact is spring loaded to avoid
any air gap between the two optical faces.
• Low insertion loss is provided by high
precision pieces.
• Single jumpers, multiway harness and
active device housings can be supplied
regarding customer requirement.
Connector accommodation
Any TRIM TRIO size 16 contact can
be used in any contact position in any
connector in the TRIM TRIO size 16
interconnection system.
• MS-M / MSG / MB
• SMS Qikmate
• UTG
• UTP
• UT0
Performance characteristics
Fiber type POF / PCF Silica 50 / 125µm
Wave length 650 nm 850 or 1300 nm
Optical insertion loss (typ.) 2 dB max. < 0.5 dB
Jacketed external diameter 2.2mm 1.5mm (or 0.9mm with adaptor)
Temperature range -25°C to +70°C -40°C to +70°C
Cable retention 49N 60N
Mating cycles without cleaning 50 50
Max. mating cycles 500 250
Construction
Contact body: Copper alloy
Outer spring: BeCu
How to order
POF Contacts (Plastic Optical Fiber)
Male contact: RMPOF1000
Female contact: RCPOF1000
PCF Contacts (Plastic Clad Fiber)
Male contact: RMPCF230
Female contact: RCPCF230
Silica Contacts
Male contact: 8012P14G353
Female contact: 8012S14G353
Tool kit
Crimping / polishing technic
The tool kit contains all necessary tools to
terminate contacts for POF Fiber or Silica
Fiber, such as
• Stripping plier
• Crimping plier
• Polishing plate and tool
• Miscallaneous
Part number: consult factory
15 1
Machined Contacts
Solder Cup Style
Solder Cups
• No crimp tool required
• Ideal for rrototype & repair
• Gold plating for high performance
Size Pin Contacts Sockets Current Rating Wire Size
16 RM16SE0K RC165E4K 13 Amps 16 - 20 AWG
12 RM12Z43028 RC12Z42028 26 Amps 12 - 14 AWG
8 82911685NZX 82911684ZX 44 Amps 8 - 12 AWG
20 RM20W3KZS
(consult factory)
RC20W3KZS
(consult factory) 7.5 Amps 22 - 26 AWG
15 2
Contacts for UT0W/UTS
Connectors size 20
RM/RC-W Machined Contacts
SM/SC-W Stamped Contacts
Description
Size 20 contacts with a .040” (1.0mm)
pin diameter are two piece crimp snap-in
contacts in pin and socket version available
in:
• Solid machined version
• Stamped and formed version
• Solid machined dip solder contacts
- 50A7
- 5016
And designed for heavy duty top
performance requirements.
These contacts consist of a crimp/solder
body made of high conductive copper
alloy, and a stainless steel retaining spring
featuring retention in the housing cavity
and a closed entry socket to prevent probe
damage.
Crimp contacts accommodate AWG20
through AWG26 wire and the crimp barrels.
All contacts have to be ordered
separately
Features and benefits
• Made from high conductive copper alloy
with gold plate finish.
• Two piece construction with dual purpose
spring which serves for contact retention
and protects the body against damage.
• Stamped and formed contacts packaging
- On reel: 3000 pcs
- In bulk packing: 100 pcs in plastic bag
• Solid machined crimp and dip solder
contacts packaging
– 50 pcs in plastic box
How to order
Performance characteristics
Machined Stamped and Formed
Current rating: 7,5 Amps 5 Amps
Contact resistance: 울 6 mΩ 울 15 m Ω
Dielectric withstanding voltage: 1500 V Rms min
Contact retention in body: 90 N max.
Contact engagement force: 5 N max.
Contact separation force: 0,3 N min.
Plating: 0.40 µ gold over nickel 0.75 µ gold over nickel
Construction
Contact body: High conductive copper
alloy.
Outer spring: Stainless steel
Connector accommodation
Any size 20 contacts for UT0W connectors
can be used in any contact position.
Contact type Part number AWG Section
mm2
Insulation
diameter Tooling
Pin
RM24W3K 26 – 24 0.13 – 0.25 1.58 max.
MH860 +
positionner
MH86301
RM20W3K 22 – 20 0.35 – 0.50 1.58 max.
RM18W3K 20 - 18 0.50 - 1.00 2.10 max.
Socket
RC24W3K 26 – 24 0.13 – 0.25 1.58 max.
RC20W3K 22 – 20 0.35 – 0.50 1.58 max.
RC18W3K 20 - 18 0.50 - 1.00 2.10 max.
Pin
SM24W3S26
SM24WL3S26 26 – 24 0.13 – 0.25 0.89 – 1.58
Y16SCM3 or
Y14MTV
SM20W3S26
SM20WL3S26 22 – 20 0.35 – 0.50 1.17 – 2.08
Socket
SC24W3S25
SC24WL3S25 26 – 24 0.13 – 0.25 0.89 – 1.58
SC20W3S25
SC20WL3S25 22 - 20 0.35 – 0.50 1.17 – 2.08
Pin
50A7 RMW50A7K
For solder tail details see next page.
5016 RMW5016K
Socket
50A7 RCW50A7K
5016 RCW5016K
Machined
crimp
Stamped & formed
crimp
Machined
Dip solder
Reeled
loose piece
Reeled
loose piece
Reeled
loose piece
Reeled
loose piece
15 3
Nominal length (dim G) of dipsolder contacts out of connector (contacts to be ordered separately)
UT0W0 wall mounting receptacle connectors
Connector size Pin contact Socket contact
RMW50A7K RMW5016K RCW50A7K RCW5016K
10
9.43 10.33 9.85 10.50
12
14
16
18
20
9.24 10.32 7.65 8.31
22
24
UT0W7 jam nut receptacle connectors
Connector size Pin contact Socket contact
RMW50A7K RMW5016K RCW50A7K RCW5016K
10
9.51 10.41 2.4 3.04
12
14
16
18
20 56––
22
24 3.6 4.6
For recommended PC-Board hole lay out: Consult factory
PC Boardmount Contacts
for UT0W size 20
15 4
Power contacts 8291
Contacts
TRIM TRIO Connectors also offer
possibilities to use or combine power
contacts with the standard size 16 signal
contacts into the same housing.
It offers customers to reduce the number of
connectors when combining signal and high
current applications into 1 connector.
The signal cavities accept the full range of
TRIM TRIO size 16 contacts for applications
up till 13 A.
Power cavities will either accept:
• Size 12 contacts for applications
up till 26 A
• Size 8 contacts for applications
up till 44 A
Pin and Socket contacts are solid machined
crimp snap-in and sockets for heavy duty
top performance requirements
Springs on both contacts are made of
spring tempered, heat-treated, beryllium
copper.
Construction
Contact body : High conductive copper
alloy
Outer spring : Tempered, heat-treated, non
plated berylium copper.
Plating
K = 0.4m Gold mini all over, over Nickel
A = 3µ Silver all over
Performance characteristics
Contacts # 12 (Ø 2,4) Contacts # 8 (Ø 3,6)
Current rating : 26 A 44 A
Contact resistance : ≤ 5 mΩ≤ 5 mΩ
15 5
Power contacts 8291
Part number
Contact
size
Contact
diameter
Cable
Locator Extraction
tooling
Pin Socket Section Insulator
diameter
mm mm2AWG mm
82911437NA 82911436A
#12 2.4
0.5 20
4.9 M317 VGE10077A 51060210924
82911435NA 82911434A 0.75-1.0 18
82911463NA 82911462A 1.5 16
82911465NA 82911464A 2.5 14
82911437NK 82911436K
#12 2.4
0.5 20
4.9 M317 VGE10077A 51060210924
82911435NK 82911434K 0.75-1.0 18
82911463NK 82911462K 1.50 16
82911465NK 82911464K 2.5 14
82913601A 82913600A
# 8 3.6
1.5 16
6.5 M317 VGE10078A 51060210936
82913603A 82913602A 2.5 14
82913605A 82913604A 4 12
82913607A 82913606A 6 10
82913609A 82913608A 10 8
RM12Z43D28
RC12Z43D28 12 2.4 10-4 8-12 N/A NO TOOL REQUIRED
82911685NZX
82911684ZX 8 3.6 4-25 12-14 N/A SOLDER CUP - NO TOOL REQUIRED
Contacts # 12 (2.4 mm)
Contacts # 8 (3.6 mm)
How to order
15 6
Accessories
Discrimination keys
for TRIM TRIO size 16
connectors
Description
In applications where similar connectors are
used next to each other, mismatching can
be a reason for disturbances, system failure
or even danger to operating personnel.
To eliminate mismatching, all TRIM
TRIO connectors can be equipped
with discrimination keys, which offer
unlimited possibilities for a “fool - proof”
interconnection system.
When one of these discrimination keys is
used, the TRIM TRIO connector will only
mate with a connector which has a vacant
contact or discrimination cavity at the
corresponding position.
This system offers boundless opportunities
for all applications which involve several
identical TRIM TRIO connectors.
The material used is polyamide 6.6
SMSPKE0
A dummy contact, which can be inserted into an empty contact cavity in any of the TRIM TRIO connectors.
SMSPKB2
A tube, which can be fitted over a preassembled male contact in all TRIM TRIO male boardmount connectors MSO, SMS, MSG.
15 7
Accessories
SMSPKE2V1
A pin, which can be inserted into a preassambled female contact in all TRIM TRIO female boardmount connectors MSO, SMS.
SMSPKE3
A pin, Which can be inserted in the discrimination cavities of the SMS Qikmate cable and boardmount connectors. The discrimination cavities
are in between of the contact cavities and offer the advantage that no contact cavities are lost due to discrimination.
As extraction tool, the RX2025GE1 without the “extraction tool tip” can be used.
To unlock the discrimination pin, insert the extraction tool in the discrimination cavity at the rear side of the connector. Meanwhile, the pin can
be extracted manually at the mating side.
15 8
Tooling – intro
Overview TRIM TRIO tooling
Crimptooling for TRIM TRIO contacts
The TRIM TRIO connection system not only offers versatility in connectors but production versatility in tooling as well.
All information needed on tooling ranges from simple handtools for small production, over semi-automatic to full automatic strip-and-crimp
machines can be found on the hereafter paragraphs.
All the TRIM TRIO tooling and this for machined, stamped and formed and coax contacts, is specially designed for this system to make
reliable, trouble-free connections.
15 9
Tooling
Crimptooling for Size 16 contacts (Ø 1,6 mm)
For an overview on crimptooling refer to “crimptooling tables” at the different contact sections.
MH860 - for machined contacts
A light weight crimptool Qualified to MIL-C-22520/7 that gives
an 8 impression crimp with a precision cycle-controlled ratcheting
mechanism. It features an 8 step crimp-depth selector knob and
is designed to crimp Size 16 TRIM TRIO RM/RC loose piece
machined contacts. The tool can be provided with different
locators heads to crimp different contact types.
Weight: 300 gr.
Length: 170 mm.
M10S1 - for machined contacts
A robust, versatile, full cycling handtool which is fully qualified to the
requirements of MIL-C-22520. Interchangeable 4-indent die sets
are available for a wide range of machined contacts and gives a
simultaneous crimp on both wire and insulation.
This tool is suitable for application of RM/RC machined
contacts and coaxial from the TRIM TRIO range.
Weight: 425 gr.
Length: 250 mm.
Y16RCM - for machined contacts
A light weight, low cost crimptool with fixed, 3-groove die set to
crimp Size 16 TRIM TRIO RM/RC loose piece machined
contacts.
The tool is ratchet controlled to guarantee a complete crimp cycle.
Each crimptool is supplied with a locator to guarantee a perfect
crimp indent positioning.
Weight: 400 gr.
Length: 205 mm.
AF8 - for machined contacts
Qualified to MIL-C-22520/1, has virtually limitless application
within the specified wire range of 12 through 26 AWG. It gives an
8 impression crimp with a precision cycle-controlled ratcheting
mechanism and is used for certain machined power
contacts and certain coax contacts. The tool can be provided
with different locators turret heads to crimp different contact types.
Weight: 425 gr.
Length: 250 mm.
16 0
Weight: 340 gr.
Length: 220 mm
Y14SCM2 - for formed contacts
A low cost non ratchet plier type handtool for AWG26 to 16 +
insulation crimp for:
Size 16 TRIM TRIO SM-M/SC-M loose piece formed
contacts.
Size 20 SEALOK SM-W/SC-W loose piece formed contacts.
Tooling
Weight: 800 gr.
Length: 275 mm.
Weight: 400 gr.
Length: 230 mm.
Weight: 400 gr.
Length: 205 mm
M8ND - for machined and formed contacts
A robust full cycling hand ratchet tool which utilises interchangeable
“N” die sets to crimp
Size 16 TRIM TRIO RM/RC loose piece machined
contacts.
Size 16 TRIM TRIO SM-M/SC-M loose piece formed
contacts.
Y14MTV - for formed contact
A light weight crimptool with fixed 3-groove die set for AWG26 to
14 for: Size 16 TRIM TRIO SM-M/SC-M loose piece formed
contacts.
Ratchet controlled to guarantee a complete crimp cycle.
Y16SCM2 - for formed contacts
A light weight crimptool with fixed 3-groove die set for AWG26 to
16 for:
Size 16 TRIM TRIO SM-M/SC-M loose piece formed
contacts.
Ratchet controlled to guarantee a complete crimp cycle.
Each crimptool is supplied with a locator to guarantee a perfect
crimp indent positioning.
Crimptooling for Size 16 contacts (Ø 1,6 mm)
For an overview on crimptooling refer to “crimptooling tables” at the different contact sections.
16 1
Weight: 400 gr.
Length: 205 mm.
Y14SCM - for formed contacts
A light weight crimptool with fixed 3-groove die set for AWG18 to
14 for:
Size 16 TRIM TRIO SM-M/SC-M loose piece formed
contacts.
Ratchet controlled to guarantee a complete crimp cycle.
Each crimptool is supplied with a locator to guarantee a perfect
crimp indent positioning.
Crimptooling for Size 16 contacts (Ø 1,6 mm)
For an overview on crimptooling refer to “crimptooling tables” at the different contact sections.
Tooling
16 2
Tooling
Extraction and insertion tooling for size 16 contacts (Ø 1,6 mm)
RX2025GE1
A spring loaded extraction tool for the full range of TRIM TRIO
contacts. This tool ensures that the contact locking louvres are
fully retracted before any pressure is applied to extract a contact.
Part number for extraction tip: RX2025GE1P4.
RX2025GE2
A low cost spring loaded extraction tool for the full range of TRIM
TRIO contacts.
RX16D11D1
A spring loaded extraction tool for the full range of TRIM TRIO
contacts. This tool ensures that the contact locking louvres are
fully retracted before any pressure is applied to extract a contact.
It is especially suitable for applications where the integrity of the
assemblies are of the utmost importance.
How to extract a contact out of its cavity?
Slide the extraction tip over contact from mating side till the locking
spring from the contact is depressed.
Push on handle to push out the contact with the spring loaded inner
plunger.
Insertion tooling
RTM205
This tool is especially designed to ease insertion of any TRIM
TRIO contact crimped on very flexible or small wire sizes. Simply
position the insertion tool so that the tip of the tool bears against
the back of the wire barrel, retaining the wire with thumb in the
groove of the tool. Push the contact slowly into the connector until it
snaps into position.
Extraction tip
16 3
Tooling
Crimptooling for Size 20 contacts (Ø 1,0 mm)
For an overview on crimptooling refer to “crimptooling tables” at the different contact sections.
MH860 - for machined contacts
A light weight crimptool Qualified to MIL-C-22520/7 that gives
an 8 impression crimp with a precision cycle-controlled ratcheting
mechanism. It features an 8 step crimp-depth selector knob. The
tool can be provided with different locators heads to crimp different
contact types.
Weight: 300 gr.
Length: 170 mm.
Weight: 340 gr.
Length: 220 mm
Y14SCM2 - for formed contacts
A low cost non ratchet plier type handtool for AWG26 to 16 +
insulation crimp.
Weight: 400 gr.
Length: 205 mm
Y16SCM3 - for formed contacts
A light weight crimptool with fixed 3-groove die set for AWG26 to
16 for:
Size 20 loose piece formed contacts.
Ratchet controlled to guarantee a complete crimp cycle.
Each crimptool is supplied with a locator to guarantee a perfect
crimp indent positioning.
Weight: 400 gr.
Length: 230 mm.
Y14MTV - for formed contact
A light weight crimptool with fixed 3-groove die set for AWG26 to
14. Ratchet controlled to guarantee a complete crimp cycle.
16 4
Tooling
Extraction and insertion tooling for size 20 contacts (Ø 1,0 mm)
RX20D44
A spring loaded extraction tool. This tool ensures that the contact
locking louvres are fully retracted before any pressure is applied to
extract a contact. It is especially suitable for applications where the
integrity of the assemblies are of the utmost importance.
How to extract a contact out of its cavity?
Slide the extraction tip over contact from mating side till the locking
spring from the contact is depressed.
Push on handle to push out the contact with the spring loaded inner
plunger.
Insertion tooling
RTM205
This tool is especially designed to ease insertion of any contact
crimped on very flexible or small wire sizes. Simply position the
insertion tool so that the tip of the tool bears against the back of
the wire barrel, retaining the wire with thumb in the groove of the
tool. Push the contact slowly into the connector until it snaps into
position.
16 5
Tooling
Automatic crimptooling for size
16 (Ø 1,6 mm) and size 20
(Ø 1,0 mm) contacts
P100 MAN Press
This electromechanical high speed full automatic crimping press
is specially designed for mass production and is realised totally in
assembled steel parts.
The available force consents the crimping of a wire section up to
2.5mm2.
The press has a 40mm stroke and can be used together with
automatic cut and stripping machines.
It uses a new electronic module to control the bracking of the press
at the desired point. The noise level of the press is less than 70dB.
There is a safety mechanism that stops the press if the working
speed is too high or the press does not complete its cycle. This
protects the press or equipment mounted on board from damage.
Ref.: P100MAN
Power.: 0.37 kWatt
Weight: 35 kg
Dimensions: 200x300x580
MLS--- Left side miniapplicator
Miniapplicatorsn to crimp machined or stamped and formed TRIM
TRIO and SEALOK contacts.
All the adjustments requested to make tool correctly functioning
(crimp feeding pitch, crimp height...) can be simply made. Resolution
of 0.03mm. Regulation range from 0 to 2.7 mm.
Ref.: See contact sections
Stroke: 40 mm
Weight: 4.5 kg
Dimensions: 145x107x150
SC10S1 Stripper-crimper
This stripper unit is used to strip insulation, immediately before the
crimping of the contact terminal. The stripper unit is totally separate
from the miniapplicator that allows the execution in a way that the
setup and trial of the stripper unit can be done independently.
Ref.: SC10S1
Pressure: 5 - 7 bars
Cable section: 0.2 - 3 mm2
Stripping length: 2.5 - 12 mm
Weight: 7.5 kg
Options
1 - Quality assurance for crimping technology...
A crimping force sensor continuously checks the quality of each individual
crimp and records it without impairing the processing speed. The sensor
detects bad crimp connections, eliminating the high subsequent costs
otherwise caused by them.
For ordering consult factory
Options
2 - Crimp pull press gauge
The crimp pull press gauge allows to measure the resistance to the pulling
of crimped terminals.
3 - Crimp height measuring device
4 - Kit press lighting lamp
For ordering consult factory
16 6
Tooling
Hand tooling for machined power contact # 12 (2,4 mm)
Crimp tooling M317 and locator VGE1 0077A
Handtooling for machined power contacts # 8 (3,6 mm)
Crimp tooling M317 and locator VGE1 0078A
Extraction tooling for power contact # 12 (2,4 mm)
Extraction tooling 5106.021.09.24
Extraction tip: 5106.021.34.24
Extraction tooling for contact # 8 (3,6 mm)
Extraction tooling 5106.021.09.36
Extraction tip: 5106.021.34.36
Crimptooling & extraction tooling for power contacts:
Size 12 (dia. 2.4mm)
Size 8 (dia. 3.6mm)
Extraction tip
Extraction tip
167
26482 Series I Connectors
26482 Series I
Solder Connectors
168
Main Features - Part Numbering System .........................169
Backshells / Hermetic Connectors ....................................170
Contacts....................................................................................172
Layouts ......................................................................................173
Technical Characteristics ......................................................174
Dimensions...............................................................................174
Protective Caps.......................................................................191
Push-Pull Plug ..........................................................................194
8F51 Filter Connector ...........................................................197
26482 Series I
Solder Connectors
169
specification - olive green cadmium plate (without specification)
29 black anodized (solder contacts)
031 black anodized (crimp contacts)
44 nickel plate
38 nickel plate
}
backshell type T* and RT*
42 olive green cadmium plate
obligatory suffix
Bcrimped version which used layouts 8-2 / 8-3 / 8-4 / 12-14
50 gold plated crimp contacts - solder contacts size 20 - contacts with a gold plated active zone
and tin plated terminations - other gold plated terminations
51 solder contacts gold plated size 20
52 zinc cobalt olive green plated (contacts : idem specif. 50)
54 black zinc nickel plating
orientation normal (not included in part number) w, x, y, z, see table p 21
contact type P= male - S= female
contact layout see table p 20
shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24
backshell type see table next page
shell type
solder crimp
00 00 - square flange receptacle accepting backshells
01 01 - cable connecting receptacle
02E 02R - square flange receptacle not accepting backshells
07 07 - jam nut receptacle accepting backshells
07A - jam nut receptacle not accepting backshells
06 06 - plug for use with straight backshells
08 08 - plug for use with 90° backshells
36 36 - screened plug for use with straight backshells
76 76 - screened plug with lock finger
Applications
Formerly used exclusively in military
applications, these connectors are now used
in a wide variety of commercial applications.
Description
• Bayonet coupling
• Environmental and hermetic versions
• Solder, crimp, straight spills and wire wrap
versions
• Thermocouple contacts available
• Cadmium free plating (Zinc Cobalt) version
• Contact resistance :
- environmental version :
size 20 : 4 mΩsize 16 : 3 mΩ
- hermetic version :
size 20 : 30 mΩsize 16 : 14 mΩ
•Shielding : 70 dB to 5 MHz
40 dB to 100 MHz
Environmental
•Working temperature : -55°C to +125°C
• Sealing :
-crimp contact version, 1 bar differential
pressure, leakage ≤8 cm3/hr
- solder contact version, 2 bar differential
pressure, leakage ≤16 cm3/hr
• Hermiticity : 1 bar differential pressure leakage
≤2,8 mm3/hr
• Chemical resistance :
- to MIL-C 26482 G Series 1 and
- NFC 93422-HE 301 B code A
• Resistance to salt spray : 48 hours at
environmental temperature
• Damp heat : 21 days
• Vibration : to NFC 20-616
Electrical
•Dielectric withstanding voltage :
•at standard pressure :
mated and unmated connectors
- 1 500 Vrms between size 20 contacts (service 1)
- 2 300 Vrms between size 16 contacts (service 2)
- 1 500 Vrms between mixed size 20
and 16 contacts (service 1)
• at reduced pressure (10 mbar) :
connectors mated and unmated
- 200 Vrms between size 20 contacts (service 1)
- 300 Vrms between size 16 contacts (service 2)
• Insulation resistance : ≥5 000 MΩunder 500 Vdc
• Current rating per contact :
size 20 : 7.5 A size 16 : 13 A
Standards
MIL-C 26482 G Series 1
NFC 93422-He 301 B
VG 95328
BS 9522 F 0017
GAM T1 list
QPL approved (solder version)
Characteristics
Mechanical
•Shell :
•environmental version :
- aluminum alloy plating
- olive green cadmium
-black anodized
- white cadmium
-satin finish bright nickel
- zinc cobalt (olive green)
•hermetic version : steel
•plating : - iridescent yellow cadmium, nickel
• Insulator :
- front section : neoprene elastomer (85 shore)
- rear section : neoprene elastomer (40 shore)
• Contact :
- crimp : inserted and removed from rear of
insulator retained by metallic clip ; solder and
straight spills : non removable ; wire wrap :
removable or not removable
- material : copper alloy
- plating : gold overall or gold plated active zone
and tin/lead plated termination
- min retention force of contacts in insulator
basic series solder version 851 - 00 E 8 - 3A P•50 •••
crimp version 851 - 00 R 8 - 3A P•50 •••
contact size
20 (Ø 1 mm)
16 (Ø 1.6 mm)
crimp
≥68 N
≥113 N
solder straight spill ww
≥68 N
≥113 N
•Mechanical durability :
500 cycles (full mating-unmating)
Ordering information - Environmental connectors
26482 Series I
Solder Connectors
170
specification
- 02H and 07H, yellow cadmium plating. IH, nickel (without specification)
44 - 02H and 07H, nickel
obligatory suffix
50 - gold plating for size 20 contacts
orientation Nnormal (not included in part number) w, x, y, z, see table p 21
contact type P= male only
contact layout see table p 20
shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24
shell type
02H - square flange receptable
07H - jam nut receptable
IH - solder fixing receptable
basic series 851 -02H 8 -3A P•50 ••
Hermetic connectors
Backshell type
solder crimp
backshell
shells solder version crimp version
00 01 07 06 08 36 76 00 01 07 06 08 36 76
ERbacknut ••••---••••---
EC RC straight cable clamp ••••---••••---
EC RC 90° cable clamp ----•------•--
AC straight cable clamp without grommet ••••----------
P RP straight backshell for potting ••••---••••---
P RP 90° backshell for potting ----•------•--
A RA straight adapter ••-•-•-••-•-•-
T RT straight backshell for heatshrink sleeving ••••---••••---
M RM straight removable backshell for heatshrink sleeving ••-•---••-•---
*T *RT straight removable backshell for screen termination
and heatshrink sleeving •••--•-•••--•-
G RG straight removable backshell for screen termination
and heatshrink sleeving •••--•-•••--•-
Jstraight backshell with sealing gland ••-•----------
JC straight backshell with sealing gland and cable clamp ••-•----------
U RU short backshell for screen termination
and heatshrink sleeving ------•------•
Z RZ straight adapter for electrical pitch access ---•------•---
26482 Series I
Solder Connectors
171
851 00 R .. .. .. 50 .. HE 301 B 00 R .. .. .. 1A * MS 3120 E .. .. .. VG 95328 A .. .. ..
851 00 RC .. .. .. 50 .. HE 301 B 00 RC .. .. .. 1A * MS 3120 F .. .. .. VG 95328 B .. .. ..
851 00 RP .. .. .. 50 .. HE 301 B 00 RP .. .. .. 1A * MS 3120 P .. .. ..
851 00 RG .. .. .. 50 .. VG 95328 R .. .. ..
851 00 RA .. .. .. 50 .. HE 301 B 00 RA .. .. .. 1A
851 01 R .. .. .. 50 .. HE 301 B 01 R .. .. .. 1A * MS 3121 E .. .. ..
851 01 RC .. .. .. 50 .. HE 301 B 01 RC .. .. .. 1A * MS 3121 F .. .. ..
851 01 RP .. .. .. 50 .. HE 301 B 01 RP .. .. .. 1A * MS 3121 P .. .. ..
851 01 RA .. .. .. 50 .. HE 301 B 01 RA .. .. .. 1A
851 02 R .. .. .. 50 .. HE 301 B 02 R .. .. .. 1A * MS 3122 E .. .. .. VG 95328 C .. .. ..
851 06 R .. .. .. 50 .. HE 301 B 06 R .. .. .. 1A * MS 3126 E .. .. ..
851 06 RC .. .. .. 50 .. HE 301 B 06 RC .. .. .. 1A * MS 3126 F .. .. .. VG 95328 K .. .. ..
851 06 RP .. .. .. 50 .. HE 301 B 06 RP .. .. .. 1A * MS 3126 P .. .. ..
851 06 RT .. .. .. 50 .. VG 95328 J .. .. ..
851 06 RA .. .. .. 50 .. HE 301 B 06 RA .. .. .. 1A
851 36 RG .. .. .. 50 .. VG 95328 M .. .. ..
851 36 RA .. .. .. 50 .. VG 95328 N .. .. ..
851 07 R .. .. .. 50 .. HE 301 B 07 R .. .. .. 1A * MS 3124 E .. .. .. VG 95328 D .. .. ..
851 07 RC .. .. .. 50 .. HE 301 B 07 RC .. .. .. 1A * MS 3124 F .. .. .. VG 95328 E .. .. ..
851 07 RP .. .. .. 50 .. HE 301 B 07 RP .. .. .. 1A * MS 3124 P .. .. ..
851 07 RT .. .. .. 50 .. VG 95328 S .. .. ..
851 07 RG .. .. .. 50 .. VG 95328 T .. .. ..
851 76 RU .. .. .. 50 .. VG 95328 U .. .. ..
851 08 RC .. .. .. 50 .. HE 301 B 08 RC .. .. .. 1A
851 08 RP .. .. .. 50 .. HE 301 B 08 RP .. .. .. 1A
* Not QPL.
Other plating
black anodized 851 .. .. .. .. .. 5029 851 .. .. .. .. .. 50031 HE 301 B .. .. .. .. .. 4A
nickel 851 .. .. .. .. .. 5044 851 .. .. .. .. .. 5044 HE 301 B .. .. .. .. .. 5A
specification
16 olive green cadmium plated body - Ø 1 mm contact, Ø 0,6 mm terminal
straight spill - Ø 1,6 mm contact, Ø 1 mm terminal
45 nickel plating - Ø 1 mm contact, Ø 0,6 mm terminal
- Ø 1,6 mm contact, Ø 1 mm terminal
34 non-bonded contacts, olive green cadmium plated shell
wire wrap 34A bonded contacts, olive green cadmium plated shell
obligatory suffix
50 - pre-tinning for straight spill size 20 contacts (termination area), gold plating for other contacts
51 - gold plating for straight spill contacts size 20
52 - zinc cobalt olive green plated (contacts : idem specif. 50)
54 - black zinc nickel plating
orientation Nnormal (not included in part number) w, x, y, z, see table p 21
contact type P= male - S= female
contact layout see table p 20
shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24
shell type
02E - square flange receptable not accepting backshell
07A - jam nut receptable not accepting backshell
basic series 851 -02E 8 -3A P•50 16
Straight spills and wire wrap connectors
Cross reference list
26482 Series I version with crimp contacts (olive green cadmium plating)
connectors with backshells
Souriau NFC 93422
(HE 301 B)
MIL-C 26482 G
Series I VG 95328
platingplatingplating solder version crimp version NFC 93422 (HE 301 B)
Souriau
26482 Series I
Solder Connectors
172
Souriau NFC 93422 (HE 301 B) MIL-C 26482 G Series I VG 95328
Souriau
8500-809
8500-812
chromel male
20
16
female
male
female
851 00 E .. .. .. 50 .. HE 301 B 00 E .. .. .. 1A MS 3110 E .. .. ..
851 00 EC .. .. .. 50 .. HE 301 B 00 EC .. .. .. 1A MS 3110 F .. .. ..
851 00 AC .. .. .. 50 .. HE 301 B 00 AC .. .. .. 1A
851 00 P .. .. .. 50 .. HE 301 B 00 P .. .. .. 1A MS 3110 P .. .. ..
851 00 A .. .. .. 50 .. HE 301 B 00 A .. .. .. 1A
851 00 J .. .. .. 50 .. HE 301 B 00 J .. .. .. 1A
851 00 JC .. .. .. 50 .. MS 3110 J .. .. ..
851 01 E .. .. .. 50 .. HE 301 B 01 E .. .. .. 1A MS 3111 E .. .. ..
851 01 EC .. .. .. 50 .. HE 301 B 01 EC .. .. .. 1A MS 3111 F .. .. ..
851 01 AC .. .. .. 50 .. HE 301 B 01 AC .. .. .. 1A
851 01 P .. .. .. 50 .. HE 301 B 01 P .. .. .. 1A MS 3111 P .. .. ..
851 01 A .. .. .. 50 .. HE 301 B 01 A .. .. .. 1A
851 01 J .. .. .. 50 .. HE 301 B 01 J .. .. .. 1A
851 01 JC .. .. .. 50 .. MS 3111 J .. .. ..
851 02 E .. .. .. 50 .. HE 301 B 02 E .. .. .. 1A MS 3112 E .. .. .. VG 95328 H .. .. ..
851 06 E .. .. .. 50 .. HE 301 B 06 E .. .. .. 1A MS 3116 E .. .. ..
851 06 EC .. .. .. 50 .. HE 301 B 06 EC .. .. .. 1A MS 3116 F .. .. ..
851 06 AC .. .. .. 50 .. HE 301 B 06 AC .. .. .. 1A
851 06 P .. .. .. 50 .. HE 301 B 06 P .. .. .. 1A MS 3116 P .. .. ..
851 06 A .. .. .. 50 .. HE 301 B 06 A .. .. .. 1A
851 06 J .. .. .. 50 .. HE 301 B 06 J .. .. .. 1A
851 06 JC .. .. .. 50 .. MS 3116 J .. .. ..
851 08 EC .. .. .. 50 .. HE 301 B 08 EC .. .. .. 1A
851 08 P .. .. .. 50 .. HE 301 B 08 P .. .. .. 1A
851 07 E .. .. .. 50 .. HE 301 B 07 E .. .. .. 1A MS 3114 E .. .. ..
851 07 EC .. .. .. 50 .. HE 301 B 07 EC .. .. .. 1A MS 3114 F .. .. ..
851 07 AC .. .. .. 50 .. HE 301 B 07 AC .. .. .. 1A
851 07 P .. .. .. 50 .. HE 301 B 07 P .. .. .. 1A MS 3114 P .. .. ..
851 07 A .. .. .. 50 .. HE 301 B 07 A .. .. .. 1A
851 hermetic version
851 02 H .. .. P.50 HE 301 B 02 H .. .. P.3A
851 07 H .. .. P.50 HE 301 B 07 H .. .. P.3A * MS 3114 H .. .. P. VG 95328 F .. .. ..
851 IH .. .. P.50 HE 301 B 1 H .. .. P.3A * MS 3113 H .. .. P. VG 95328 G .. .. ..
* Not QPL.
26482 Series I version with solder contacts (olive green cadmium plating)
connectors with backshells
NFC 93422 (model HE 301 B) MIL-C 26482 G Series I VG 95328
contact type
male for contact
layouts 82, 83
84 and 12.14 20
16
8500-9573
0.21
to
0.93
0.93
to
1.91
24
to
18
18
to
14
1.20 / 2.11
1.60 / 2.80
8500-9213
8500-697
8500-1758A
8500-1300
8500-9331
for other
contact
layouts
female
male
female
male
female
reducing sleeve
20 8500-781 0.06 to 0.21 30 to 24
16 8500-1985 0.60
0.21
to
0.93
0.93
to
1.91
24
to
18
18
to
14
1.20 / 2.11
1.60 / 2.80
20
contact
size part numbers section in
mm2gauge AWG Ø over insulation
min/Max (mm)
alumel
chromel
alumel
chromel
alumel
chromel
alumel
8500-2054
8500-2055
8500-1053
8500-1058
8500-1054
8500-1059
Contacts - Crimp contacts
standard
contact type
male
20
16
8500-4220 26-28-30
26-28-30
20-22-24-26
20-22-24-26
0.78
0.85
0.78
0.85
1.55
1.70
1.55
1.70
3
3
3
3
8500-9351
8500-4304
8500-4305
female
male
female
contact
size part numbers gauge AWG
diagonals
number
of wraps
Wire wrap contacts
thermocouple
26482 Series I
Solder Connectors
173
Contact layouts
Viewed from front face of male insulator
shells
8
2■
◆
●●
3■
◆
●●
3A■
ou ▲
98 ●
◆
●●
4■
●
◆
●●
33■
▲
●
◆
●●
10
6■
▲
●
◆
●●
7■■
●●
◆
98 ■
▲
◆
●●
12
3■
▲
●
◆
●●
8■
▲
●
◆
●●
10 ■
▲
●
◆
●●
2■■
●●
◆
14 ■■
14
5■
▲
●
◆
●●
12 ■
▲
●
◆
●●
15 ■
▲
◆
●●
18 ■
▲
◆
●●
19 ■
▲
●
◆
●●
16
8■
▲
●
◆
●●
23 ■
▲
◆
●●
26 ■
▲
●
◆
●●
18
11 ■
▲
◆
●●
32 ■
▲
●
◆
●●
30 ■
▲
◆
●●
✛
20
16 ■
▲
◆
●●
39 ■
▲
◆
●●
41 ■
▲
●
◆
●●
24 ■
▲
◆
●●
25 ■■
▲
◆
●●
✛
27 ■
▲
◆
●●
✛
22
21 ■
▲
◆
●●
36 ■■
▲
◆
●●
55 ■
▲
●
◆
●●
32 ■
▲
◆
●●
✛
34 ■
▲
◆
●●
24
61 ■
▲
●
◆
●●
■ solder contact layouts (QPL)
■
SHTP
■■solder contact layouts ● hermetic version contact layouts
✛ solder contact layouts without grommet ◆ straight spills contact layouts
▲ crimp contact layouts ●● wire wrap contact layouts
2 Ø 1 (# 20)
6 Ø 1 (# 20)
3 Ø 1,6 (# 16)
7 Ø 1 (# 20)
8 Ø 1 (# 20)
6 Ø 1 (# 20)
10 Ø 1 (# 20) 2 Ø 1,6 (# 16) 14 Ø 1 (# 20)
5 Ø 1,6 (# 16)
8 Ø 1 (# 20)
4 Ø 1,6 (# 16)
14 Ø 1 (# 20)
1 Ø 1,6 (# 16)
8 Ø 1,6 (# 16) 22 Ø 1 (# 20)
1 Ø 1,6 (# 16) 26 Ø 1 (# 20)
11 Ø 1,6 (# 16) 32 Ø 1 (# 20) 29 Ø 1 (# 20)
1 Ø 1,6 (# 16)
16 Ø 1,6 (# 16) 37 Ø 1 (# 20)
2 Ø 1,6 (# 16) 24 Ø 1 (# 20) 25 Ø 1 (# 20) 27 Ø 1 (# 20)41 Ø 1 (# 20)
21 Ø 1,6 (# 16)
61 Ø 1 (# 20)
36 Ø 1 (# 20) 32 Ø 1 (# 20) 34 Ø 1 (# 20)55 Ø 1 (# 20)
18 Ø 1 (# 20) 19 Ø 1 (# 20)
3 Ø 1 (# 20) 3 Ø 1 (# 20) 4 Ø 1 (# 20) 3 Ø 1 (# 20)
26482 Series I
Solder Connectors
174
2 58 122 —— • X
3 60 210 —— • X
8
3A (98)*
60 210 —— • • X
4 45 —— — • X
33 90 —— — • • • X
6 90 —— — • • • • X
10 7———— X
98 90 180 240 270 ••X
3——180 —• • • • X
8 90 112 203 292 ••X
12 10 60 155 270 295 ••••X
2———— X
14 •X
5 40 92 184 273 •••• X
12 43 90 ——• • • • X
14 15 17 110 155 234 ••••X
18 15 90 180 270 ••X
19 30 165 315 —• • • • X
8 54 152 180 331 •••• X
16 23 158 270 ——• • • • X
26 60 — 275 338 ••••X
11 62 119 241 340 •••• X
18 32 85 138 222 265 ••••X
30 180 193 285 350 ••X
16 238 318 333 347 •••• X
39 63 144 252 333 ••••X
20 41 45 126 225 —• • • • X
24 70 145 215 290 ••X
25 72 144 216 288 X
27 72 144 216 288 ••X
21 16 135 175 349 •••• X
36 72 144 216 288 •X
22 55 30 142 226 314 ••••X
32 72 145 215 288 •X
34 62 142 218 298 •X
24 61 90 180 270 324 ••••X
Polarization - insulator rotated inside metal body
Front face of pin insulator shown
(receptacle or plug)
Dimensions - square flange receptacle with backnut
solder
00 E HE 301 B 00 E
MS 3110 E
crimp
HE 301 B 00 R
00 R MS 3120 E
VG 95328 A
shell layout angle in degrees
NFC 93422 HE 30 1B MIL-C 26482G Serie 1 service 1 service 2
WXYZsolder crimp solder crimp
1500 Vrms 2300 Vrms
* 8-98 layout W and non standard orientations
08 32.70 32.00 12.03 11.70 1.32 13.50 15.09 20.99 3.13
1.287 1.260 .474 .461 .052 .531 .594 .826 .123
10 32.70 32.00 15.01 11.70 1.32 16.70 18.26 24.19 3.13
1.287 1.260 .591 .461 .052 .657 .719 .952 .123
12 32.70 32.00 19.07 11.70 1.32 19.90 20.62 26.54 3.13
1.287 1.260 .751 .461 .052 .783 .812 1.045 .123
14 32.70 32.00 22.25 11.70 1.32 23.40 23.00 28.89 3.13
1.287 1.260 .876 .461 .052 .921 .906 1.137 .123
16 32.70 32.00 25.42 11.70 1.32 26.60 24.61 31.29 3.13
1.287 1.260 1.001 .461 .052 1.047 .969 1.232 .123
18 32.70 32.00 28.60 11.70 1.32 29.50 26.97 33.69 3.13
1.287 1.260 1.126 .461 .052 1.161 1.062 1.326 .123
20 34.50 33.40 31.77 14.35 2.15 32.70 29.36 36.89 3.13
1.358 1.315 1.251 .565 .085 1.287 1.156 1.452 .123
22 34.50 33.40 34.95 14.35 2.15 36.00 31.75 39.99 3.13
1.358 1.315 1.376 .565 .085 1.417 1.250 1.574 .123
24 34.50 33.40 38.12 15.20 2.15 39.10 34.92 43.15 3.81
1.358 1.315 1.501 .598 .085 1.539 1.375 1.699 .150
shell L Max
ABCDEFJ
size solder crimp
Max Max Max Max
4 Holes ØJ
normal W
X
Z
L
ØD
E
ØA
BC
F
Y
▼
▼
▼
▼
26482 Series I
Solder Connectors
175
Square flange receptacle with straight cable clamp
Square flange receptacle with straight backshell for potting
Square flange receptacle with straight adapter
solder
00 P HE 301 B 00 P
MS 3110 P
crimp
HE 301 B 00 RP
00 RP MS 3120 P
solder
00 A HE 301 B 00A
crimp
00 RA HE 301 B 00 RA
solder
00 EC HE 301 B 00 EC
MS 3110 F
00 AC HE 301 B 00 AC
crimp
HE 301 B 00 RC
00 RC MS 3120 F
VG 95328 B
08 41.00 12.03 11.70 1.32 14.50 15.09 20.99 9.10 3.13
1/2 18
1.614 .474 .461 .052 .571 .594 .826 .358 .123
10 41.00 15.01 11.70 1.32 18.70 18.26 24.19 12.08 3.13
5/8 24
1.614 .591 .461 .052 .736 .719 .952 .476 .123
12 41.00 19.07 11.70 1.32 21.70 20.62 26.54 15.25 3.13
3/4 20
1.614 .751 .461 .052 .854 .812 1.045 .600 .123
14 41.00 22.25 11.70 1.32 25.10 23.00 28.89 18.15 3.13
7/8 20
1.614 .876 .461 .052 .988 .906 1.137 .715 .123
16 41.00 25.42 11.70 1.32 28.13 24.61 31.29 21.32 3.13
1-20
1.614 1.001 .461 .052 1.107 .969 1.232 .839 .123
18 41.00 28.60 11.70 1.32 31.38 26.97 33.69 24.32 3.13
1-3/16 18
1.614 1.126 .461 .052 1.235 1.062 1.326 .957 .123
20 44.00 31.77 14.35 2.15 34.30 29.36 36.89 26.73 3.13
1-3/16 18
1.732 1.251 .565 .085 1.350 1.156 1.452 1.052 .123
22 44.00 34.95 14.35 2.15 37.60 31.75 39.99 30.67 3.13
1-7/16 18
1.732 1.376 .565 .085 1.480 1.250 1.574 1.207 .123
24 44.00 38.12 15.20 2.15 40.70 34.92 43.15 33.08 3.81
1-7/16 18
1.732 1.501 .598 .085 1.602 1.375 1.699 1.302 .150
shell
size
B
Max
A C
Max
D
Max
E F
Max
G
Max
J
K threading
UNEF 2A
L Max
solder
crimp
0848.00 47.30 12.03 11.70 1.32 19.90 15.09 20.99 3.50 3.13
1.890 1.862 .474 .461 .052 .783 .594 .826 .138 .123
1048.00 47.30 15.01 11.70 1.32 21.50 18.26 24.19 5.00 3.13
1.890 1.862 .591 .461 .052 .846 .719 .952 .197 .123
12 48.00 47.30 19.07 11.70 1.32 25.00 20.62 26.54 8.20 3.13
1.890 1.862 .751 .461 .052 .984 .812 1.045 .323 .123
14 48.00 47.30 22.25 11.70 1.32 27.80 23.00 28.89 10.00 3.13
1.890 1.862 .876 .461 .052 1.094 .906 1.137 .394 .123
1651.00 50.50 25.42 11.70 1.32 29.40 24.61 31.29 13.00 3.13
2.008 1.988 1.001 .461 .052 1.157 .969 1.232 .512 .123
1851.00 50.50 28.60 11.70 1.32 35.30 26.97 33.69 16.00 3.13
2.008 1.988 1.126 .461 .052 1.390 1.062 1.326 .630 .123
2053.00 51.50 31.77 14.35 2.15 35.30 29.36 36.89 16.00 3.13
2.087 2.028 1.251 .565 .085 1.390 1.156 1.452 .630 .123
2253.00 51.50 34.95 14.35 2.15 41.10 31.75 39.99 19.30 3.13
2.087 2.028 1.376 .565 .085 1.618 1.250 1.574 .760 .123
24 53.00 51.50 38.12 15.20 2.15 42.40 34.92 43.15 20.60 3.81
2.087 2.028 1.501 .598 .085 1.669 1.375 1.699 .811 .150
shell
size
AB
Max
C
Max
D
Max
EF
Max
GJ
L Max
solder crimp
08 36.20 41.70 12.03 11.70 1.32 15.34 15.09 20.99 10.46 3.13
1.425 1.642 .474 .461 .052 .604 .594 .826 .412 .123
10 36.20 41.70 15.01 11.70 1.32 17.70 18.26 24.19 13.55 3.13
1.425 1.642 .591 .461 .052 .697 .719 .952 .533 .123
12 36.20 41.70 19.07 11.70 1.32 21.69 20.62 26.54 13.96 3.13
1.425 1.642 .751 .461 .052 .854 .812 1.045 .550 .123
14 36.20 41.70 22.25 11.70 1.32 23.90 23.00 28.89 17.42 3.13
1.425 1.642 .876 .461 .052 .941 .906 1.137 .686 .123
16 36.20 41.70 25.42 11.70 1.32 27.00 24.61 31.29 20.56 3.13
1.425 1.642 1.001 .461 .052 1.063 .969 1.232 .809 .123
18 36.91 44.46 28.60 11.70 1.32 30.50 26.97 33.69 23.66 3.13
1.453 1.750 1.126 .461 .052 1.201 1.062 1.326 .931 .123
20 43.80 50.93 31.77 14.35 2.15 33.65 29.36 36.89 23.92 3.13
1.724 2.005 1.251 .565 .085 1.325 1.156 1.452 .942 .123
22 43.80 50.93 34.95 14.35 2.15 37.10 31.75 39.99 25.52 3.13
1.724 2.005 1.376 .565 .085 1.461 1.250 1.574 1.005 .123
24 43.80 51.40 38.12 15.20 2.15 40.00 34.92 43.15 32.00 3.81
1.724 2.024 1.501 .598 .085 1.575 1.375 1.699 1.260 .150
shell
size
A B
Max
C
Max
D
Max
EF
Max
G
Max
J
L Max
solder crimp
4 Holes ØJ
4 Holes ØJ
4 Holes ØJ
L
CB
CB
C
B
F
LF
LF
E
E
D
ØG
D
ØG
ØA
ØA
E
ØA
ØG
K
D
26482 Series I
Solder Connectors
176
08 51.60 12.03 11.70 1.32 18.25 15.09 20.99 7.45 3.13 3.70
2.031 .474 .461 .052 .719 .594 .826 .293 .123 .146
10 51.60 15.01 11.70 1.32 20.25 18.26 24.19 9.00 3.13 3.70
2.031 .591 .461 .052 .797 .719 .952 .354 .123 .146
12 51.60 22.25 11.70 1.32 24.75 20.62 26.54 13.30 3.13 3.70
2.031 .751 .461 .052 .974 .812 1.045 .524 .123 .146
14 51.60 22.25 11.70 1.32 27.75 23.00 28.89 16.50 3.13 3.70
2.031 .876 .461 .052 1.093 .906 1.137 .650 .123 .146
16 51.60 25.42 11.70 1.32 30.05 24.61 31.29 18.50 3.13 3.70
2.031 1.001 .461 .052 1.183 .969 1.232 .728 .123 .146
18 52.00 28.60 11.70 1.32 34.15 26.97 33.69 21.90 3.13 3.70
2.047 1.126 .461 .052 1.344 1.062 1.326 .862 .123 .146
20 55.10 31.77 14.35 2.15 37.25 29.36 36.89 25.10 3.13 3.70
2.169 1.251 .565 .085 1.467 1.156 1.452 .988 .123 .146
22 55.10 34.95 14.35 2.15 40.45 31.75 39.99 28.20 3.13 3.70
2.169 1.376 .565 .085 1.593 1.250 1.574 1.110 .123 .146
24 55.10 38.12 15.20 2.15 36.47 34.92 43.15 29.30 3.81 3.50
2.169 1.501 .598 .085 1.719 1.375 1.699 1.236 .150 .146
0836.70 36.00 12.03 11.70 1.32 15.35 15.09 20.99 7.20 6.70 3.13 3.70
1.445 1.417 .474 .461 .052 .604 .594 .826 .283 .264 .123 .146
1036.70 36.00 15.01 11.70 1.32 18.15 18.26 24.19 10.20 9.40 3.13 3.70
1.445 1.417 .591 .461 .052 .715 .719 .952 .402 .370 .123 .146
12 36.70 36.00 19.07 11.70 1.32 23.45 20.62 26.54 13.20 11.95 3.13 3.70
1.445 1.417 .751 .461 .052 .923 .812 1.045 .520 .470 .123 .146
1436.70 36.00 22.25 11.70 1.32 24.25 23.00 28.89 16.10 15.15 3.13 3.70
1.445 1.417 .876 .461 .052 .955 .906 1.137 .634 .596 .123 .146
16 39.00 38.30 28.60 11.70 1.32 31.75 26.97 33.69 21.30 19.95 3.13 3.70
1.535 1.508 1.001 .461 .052 1.163 .969 1.232 .758 .711 .123 .146
1839.00 38.30 28.60 11.70 1.32 31.75 26.97 33.69 21.30 19.95 3.13 3.70
1.535 1.508 1.126 .461 .052 1.250 1.062 1.326 .839 .785 .123 .146
20 45.30 44.20 31.77 14.35 2.15 35.85 29.36 36.89 24.40 23.05 3.13 3.70
1.783 1.740 1.251 .565 .085 1.411 1.156 1.452 .961 .907 .123 .146
22 45.30 44.20 34.95 14.35 2.15 38.20 31.75 39.99 27.50 25.55 3.13 3.70
1.783 1.740 1.376 .565 .085 1.504 1.250 1.574 1.083 1.006 .123 .146
24 44.00 42.60 38.12 15.20 2.15 41.30 34.92 43.15 30.60 28.65 3.81 3.70
1.732 1.677 1.501 .598 .085 1.626 1.375 1.699 1.205 1.128 .150 .146
solder
00 T
crimp
00 RT
Square flange receptacle with straight backshell for heatshrink sleeving
shell L Max ABCDEFL Max JM
size
solder crimp
Max Max Max Max
solder crimp
Max
solder
00 M
crimp
00 RM
Square flange receptacle with removable straight backshell for heatshrink sleeving
08 50.00 12.03 11.70 1.32 13.55 15.09 20.99 7.05 3.13 3.50
1.969 .474 .461 .052 .604 .719 .952 .390 .123 .138
10 50.00 15.01 11.70 1.32 15.35 18.26 24.19 9.90 3.13 3.50
1.969 .591 .461 .052 .767 .812 1.045 .496 .123 .138
12 50.00 19.07 11.70 1.32 19.48 20.62 26.54 12.60 3.13 3.50
1.969 .751 .461 .052 .767 .812 1.045 .496 .123 .138
14 50.00 22.25 11.70 1.32 21.30 23.00 28.89 15.90 3.13 3.50
1.969 .876 .461 .052 .839 .906 1.137 .626 .123 .138
16 50.00 25.42 11.70 1.32 24.50 24.61 31.29 18.95 3.13 3.50
1.969 1.001 .461 .052 .965 .969 1.232 .746 .123 .138
18 50.00 28.60 11.70 1.32 26.45 26.97 33.69 20.90 3.13 3.50
1.969 1.126 .461 .052 1.041 1.062 1.326 .823 .123 .138
20 53.30 31.70 14.35 2.15 34.24 31.75 39.99 26.60 3.13 3.50
2.098 1.376 .565 .085 1.348 1.250 1.574 1.047 .123 .138
22 53.30 34.95 14.35 2.15 34.24 31.75 39.99 26.60 3.13 3.50
2.098 1.376 .565 .085 1.348 1.250 1.574 1.047 .123 .138
24 53.30 38.12 15.20 2.15 36.47 34.92 43.15 29.30 3.81 3.50
2.098 1.501 .598 .085 1.436 1.375 1.699 1.154 .150 .138
shell L Max ABCDEFGJM
size
solder
Max Max Max Max Max Max
crimp
solder
00 T
crimp
00 RT
Square flange receptacle with removable
straight backshell for screen termination and heatshrink sleeving (38 and 42 suffix)
4 Holes ØJ
4 Holes ØJ
4 Holes ØJ
L
CM
B
F
E
ØD
ØG
ØA
L
CM
B
F
E
ØD
ØG
ØA
L
CM
B
F
E
ØD
ØG
ØA
shell L Max ABCDEFGJM
size
solder
Max Max Max Max Max Max
crimp
26482 Series I
Solder Connectors
177
solder
00 JC MS 3110J
Square flange receptacle with straight sealing gland and cable clamp
solder
00 J HE 301 B 00 J
Square flange receptacle with straight sealing gland backshell
08 47.60 12.03 11.70 1.32 14.40 15.09 20.99 5.02 5.84 3.13
1.874 .474 .461 .052 .567 .594 .826 .198 .230 .123
10 47.60 15.01 11.70 1.32 17.60 18.26 24.19 5.94 6.76 3.13
1.874 .591 .461 .052 .693 .719 .952 .234 .266 .123
12 48.70 19.07 11.70 1.32 21.10 20.62 26.54 9.34 10.16 3.13
1.917 .751 .461 .052 .831 .812 1.045 .368 .400 .123
14 53.50 22.25 11.70 1.32 24.40 23.00 28.89 11.32 12.14 3.13
2.106 .876 .461 .052 .961 .906 1.137 .446 .478 .123
16 59.00 25.42 11.70 1.32 27.60 24.61 31.29 14.73 15.55 3.13
2.323 1.001 .461 .052 1.087 .969 1.232 .580 .612 .123
18 65.00 28.60 11.70 1.32 30.80 26.97 33.69 16.00 16.82 3.13
2.559 1.126 .461 .052 1.213 1.062 1.326 .630 .662 .123
20 79.10 31.77 14.35 2.15 34.10 29.36 36.89 16.89 17.70 3.13
3.114 1.251 .565 .085 1.343 1.156 1.452 .665 .697 .123
22 80.00 34.95 14.35 2.15 37.30 31.75 39.99 17.78 18.60 3.13
3.150 1.376 .565 .085 1.469 1.250 1.574 .700 .732 .123
24
90.00 38.12 15.20 2.15 40.50 34.92 43.15 20.34 21.16 3.81
3.543 1.501 .598 .085 1.594 1.375 1.699 .801 .833 .150
shell L Max ABCDEFGJ
size
solder
Max Max Max Max min Max
08 57.68 12.03 11.70 1.32 19.90 15.09 20.99 5.02 5.84 3.13
2.271 .474 .461 .052 .783 .594 .826 .198 .230 .123
10
57.68 15.01 11.70 1.32 21.50 18.26 24.19 5.94 6.76 3.13
2.271 .591 .461 .052 .846 .719 .952 .234 .266 .123
12
61.24 19.07 11.70 1.32 25.00 20.62 26.54 9.34 10.16 3.13
2.411 .751 .461 .052 .984 .812 1.045 .368 .400 .123
14
66.01 22.25 11.70 1.32 27.80 23.00 28.89 11.32 12.14 3.13
2.599 .876 .461 .052 1.094 .906 1.137 .446 .478 .123
16
74.75 25.42 11.70 1.32 29.40 24.61 31.29 14.73 15.55 3.13
2.943 1.001 .461 .052 1.157 .969 1.232 .580 .612 .123
18
80.57 28.60 11.70 1.32 35.30 26.97 33.69 16.00 16.82 3.13
3.172 1.126 .461 .052 1.390 1.062 1.326 .630 .662 .123
20
91.69 31.77 14.35 2.15 35.30 29.36 36.89 16.89 17.70 3.13
3.610 1.251 .565 .085 1.390 1.156 1.452 .665 .697 .123
22
95.66 34.95 14.35 2.15 41.10 31.75 39.99 17.78 18.60 3.13
3.766 1.376 .565 .085 1.618 1.250 1.574 .700 .732 .123
24
101.22 38.12 15.20 2.15 42.40 34.92 43.15 20.34 21.16 3.81
3.985 1.501 .598 .085 1.669 1.375 1.699 .801 .833 .150
shell L Max ABCDEFGJ
size
solder
Max Max Max Max min Max
solder
00 G
crimp
00 RG VG 95328 R
Square flange receptacle with removable straight
backshell for screen termination and heatshrink sleeving
0851.60 12.03 11.70 1.32 18.25 15.09 20.99 7.45 3.13 3.70
2.031 .474 .461 .052 .719 .594 .826 .293 .123 .146
10 51.60 15.01 11.70 1.32 20.25 18.26 24.19 9.00 3.13 3.70
2.031 .591 .461 .052 .797 .719 .952 .354 .123 .146
12 51.60 19.07 11.70 1.32 24.75 20.62 26.54 13.30 3.13 3.70
2.031 .751 .461 .052 .974 .812 1.045 .524 .123 .146
14 51.60 22.25 11.70 1.32 27.75 23.00 28.89 16.50 3.13 3.70
2.031 .876 .461 .052 1.093 .906 1.137 .650 .123 .146
1651.60 25.42 11.70 1.32 30.05 24.61 31.29 18.50 3.13 3.70
2.031 1.001 .461 .052 1.183 .969 1.232 .728 .123 .146
1852.00 28.60 11.70 1.32 34.15 26.97 33.69 21.90 3.13 3.70
2.047 1.126 .461 .052 1.344 1.062 1.326 .862 .123 .146
20 55.10 31.77 14.35 2.15 37.25 29.36 36.89 25.10 3.13 3.70
2.169 1.251 .565 .085 1.467 1.156 1.452 .988 .123 .146
22 55.10 34.95 14.35 2.15 40.45 31.75 39.99 28.20 3.13 3.70
2.169 1.376 .565 .085 1.593 1.250 1.574 1.110 .123 .146
24 55.10 38.12 15.20 2.15 43.65 34.92 43.15 31.40 3.81 3.70
2.169 1.501 .598 .085 1.719 1.375 1.699 1.236 .150 .146
shell L Max ABCDEFGJM
size
solder
Max Max Max Max Max Max
crimp
4 Holes ØJ
4 Holes ØJ
4 Holes ØJ
L
CM
B
F
E
ØD
ØG
ØA
L
C
B
F
E
ØD
ØG
ØA
LF
E
ØD
ØG
ØA
26482 Series I
Solder Connectors
178
Jam nut receptacle with backnut
Jam nut receptacle with straight backshell for potting
Jam nut receptacle with straight cable clamp
08 34.10 33.50 12.03 17.90 2.64 18.50 26.94 19.29 23.94
1.343 1.319 .474 .705 .104 .728 1.061 .759 .943
1034.10 33.50 15.01 17.90 2.64 21.70 30.14 22.38 26.94
1.343 1.319 .591 .705 .104 .854 1.187 .881 1.061
12 34.10 33.50 19.07 17.90 2.64 24.90 34.94 27.13 31.74
1.343 1.319 .751 .705 .104 .980 1.376 1.068 1.250
14 34.10 33.50 22.25 17.90 2.64 28.10 38.04 30.33 34.94
1.343 1.319 .876 .705 .104 1.106 1.498 1.194 1.376
1634.10 33.50 25.42 17.90 2.64 31.20 41.24 33.48 38.24
1.343 1.319 1.001 .705 .104 1.228 1.624 1.318 1.506
18 34.10 33.50 28.60 17.90 2.64 34.40 44.44 36.68 41.34
1.343 1.319 1.126 .705 .104 1.354 1.750 1.444 1.628
20 39.30 37.90 31.77 22.45 3.44 38.30 49.14 39.83 46.04
1.547 1.492 1.251 .884 .135 1.508 1.935 1.568 1.813
22 39.30 37.90 34.95 22.45 3.44 41.50 52.24 43.03 49.24
1.547 1.492 1.376 .884 .135 1.634 2.057 1.694 1.939
24 39.30 37.90 38.12 23.30 3.44 44.70 55.54 46.18 52.74
1.547 1.492 1.501 .917 .135 1.760 2.187 1.818 2.076
shell
size
L Max
solder crimp
08 49.31 49.10 12.03 17.90 2.64 19.90 26.94 3.50 19.29 23.94
1.941 1.933 .474 .705 .104 .783 1.061 .138 .759 .943
10 49.31 49.10 15.01 17.90 2.64 21.50 30.14 5.00 22.38 26.94
1.941 1.933 .591 .705 .104 .846 1.187 .197 .881 1.061
12 49.17 49.10 19.07 17.90 2.64 25.00 34.94 8.20 27.13 31.74
1.936 1.933 .751 .705 .104 .984 1.376 .323 1.068 1.250
14 49.17 49.10 22.25 17.90 2.64 27.80 38.04 10.00 30.33 34.94
1.936 1.933 .876 .705 .104 1.094 1.498 .394 1.194 1.376
16 52.34 52.20 25.42 17.90 2.64 29.40 41.24 13.00 33.48 38.24
2.061 2.055 1.001 .705 .104 1.157 1.624 .512 1.318 1.506
18 53.22 53.10 28.60 17.90 2.64 35.30 44.44 16.00 36.68 41.34
2.095 2.091 1.126 .705 .104 1.390 1.750 .630 1.444 1.628
20 58.10 58.00 31.77 22.45 3.44 35.30 49.14 16.00 39.83 46.04
2.287 2.283 1.251 .884 .135 1.390 1.935 .630 1.568 1.813
22 58.10 58.00 34.95 22.45 3.44 41.10 52.24 19.30 43.03 49.24
2.287 2.283 1.376 .884 .135 1.618 2.057 .760 1.694 1.939
24 58.10 58.00 38.12 23.30 3.44 42.40 55.54 20.60 46.18 52.74
2.287 2.283 1.501 .917 .135 1.669 2.187 .811 1.818 2.076
shell
size
A B
Max
C
Max
D
Max
F
Max
G P
Max
S
Max
solder
07 E HE 301 B 07 E
MS 3114 E
crimp
HE 301 B 07 R
07 R MS 3124 E
VG 95328 D
solder
07 P HE 301 B 07 P
MS 3114 P
crimp
HE 301 B 07 RP
07 RP MS 3124 P
solder
07 EC HE 301 B 07 EC
MS 3114 F
07 AC HE 301 B 07 AC
crimp
HE 301 B 07 RC
07 RC MS 3124 F
VG 95328 E
08 34.30 39.80 12.03 17.90 2.64 15.34 26.94 10.46 19.29 23.94
1.350 1.567 .474 .705 .104 .604 1.061 .412 .759 .943
10 34.30 39.80 15.01 17.90 2.64 17.70 30.14 13.55 22.38 26.94
1.350 1.567 .591 .705 .104 .697 1.187 .533 .881 1.061
12 34.30 39.80 19.07 17.90 2.64 21.69 34.94 13.96 27.13 31.74
1.350 1.567 .751 .705 .104 .854 1.376 .550 1.068 1.250
14 34.30 39.80 22.25 17.90 2.64 23.90 38.04 17.42 30.33 34.94
1.350 1.567 .876 .705 .104 .941 1.498 .686 1.194 1.376
16 34.30 39.80 25.42 17.90 2.64 27.00 41.24 20.56 33.48 38.24
1.350 1.567 1.001 .705 .104 1.063 1.624 .809 1.318 1.506
18 34.10 41.80 28.60 17.90 2.64 30.50 44.44 23.66 36.68 41.34
1.343 1.646 1.126 .705 .104 1.201 1.750 .931 1.444 1.628
20 42.25 49.92 31.77 22.45 3.44 33.65 49.14 23.92 39.83 46.04
1.663 1.965 1.251 .884 .135 1.325 1.935 .942 1.568 1.813
22 42.25 49.92 34.95 22.45 3.44 37.10 52.24 25.52 43.03 49.24
1.663 1.965 1.376 .884 .135 1.461 2.057 1.005 1.694 1.939
24 43.26 51.30 38.12 23.30 3.44 40.00 55.54 32.00 46.18 52.74
1.703 2.020 1.501 .917 .135 1.575 2.187 1.260 1.818 2.076
shell
size
A B
Max
C
Max
D
Max
F
Max
G
Max
P
Max
S
Max
L Max
solder crimp
L Max
solder crimp
A B
Max
C
Max
D
Max
F
Max
P
Max
S
Max
ØF
L
C
B
P
S
ØD
ØA
ØF
L
CB
P
S
ØG
D
ØA
ØF
L
C
B
P
S
ØG
D
ØA
26482 Series I
Solder Connectors
179
solder
07 T
crimp
07 RT VG 95328 S
Jam nut receptacle with straight backshell for heatshrink sleeving
08 42.60 41.50 12.03 17.90 2.64 15.35 26.94 7.20 6.70 3.70 19.29 23.94
1.677 1.634 .474 .705 .104 .604 1.061 .283 .264 .146 .759 .943
1042.60 41.50 15.01 17.90 2.64 18.15 30.14 10.20 9.40 3.70 22.38 26.94
1.677 1.634 .591 .705 .104 .715 1.187 .402 .370 .146 .881 1.061
1242.60 41.50 19.07 17.90 2.64 23.45 34.94 13.20 11.95 3.70 27.13 31.74
1.677 1.634 .751 .705 .104 .923 1.376 .520 .470 .146 1.068 1.250
14 42.60 41.50 22.25 17.90 2.64 24.25 38.04 16.10 15.15 3.70 30.33 34.94
1.677 1.634 .876 .705 .104 .955 1.498 .634 .596 .146 1.194 1.376
16 44.40 43.80 25.42 17.90 2.64 29.55 41.24 19.25 18.05 3.70 33.48 38.24
1.748 1.724 1.001 .705 .104 1.163 1.624 .758 .711 .146 1.318 1.506
18 44.40 43.80 28.60 17.90 2.64 31.75 44.44 21.30 19.95 3.70 36.68 41.24
1.748 1.724 1.126 .705 .104 1.250 1.750 .839 .785 .146 1.444 1.624
20 50.90 49.80 31.77 22.45 3.44 35.85 49.14 24.40 23.05 3.70 39.83 46.04
2.004 1.961 1.251 .884 .135 1.411 1.935 .961 .907 .146 1.568 1.813
2250.90 49.80 34.95 22.45 3.44 38.20 52.24 27.50 25.55 3.70 43.03 49.24
2.004 1.961 1.376 .884 .135 1.504 2.057 1.083 1.006 .146 1.694 1.939
24 49.60 48.50 38.12 23.30 3.44 41.30 55.54 30.60 28.65 3.70 46.18 52.74
1.953 1.909 1.501 .917 .135 1.626 2.187 1.205 1.128 .146 1.818 2.076
shell L Max ABCD F G Max MP S
size
solder crimp
Max Max Max Max
solder crimp
Max Max Max
solder
07 T
crimp
07 RT
Jam nut receptacle with removable straight
backshell for screen termination and heatshrink sleeving (38 and 42 suffix)
08 60.00 12.03 17.90 2.64 18.25 26.94 7.45 3.70 19.29 23.94
2.362 .474 .705 .104 .719 1.061 .293 .146 .759 .943
10 60.00 15.01 17.90 2.64 20.25 30.14 9.00 3.70 22.38 26.94
2.362 .591 .705 .104 .797 1.187 .354 .146 .881 1.061
12 60.00 19.07 17.90 2.64 24.75 34.94 13.30 3.70 27.13 31.74
2.362 .751 .705 .104 .974 1.376 .524 .146 1.068 1.250
14 60.00 22.25 17.90 2.64 27.75 38.04 16.50 3.70 30.33 34.94
2.362 .876 .705 .104 1.093 1.498 .650 .146 1.194 1.376
16 60.00 25.42 17.90 2.64 30.05 41.24 18.50 3.70 33.48 38.24
2.362 1.001 .705 .104 1.183 1.624 .728 .146 1.318 1.506
18 60.40 28.60 17.90 2.64 34.15 44.44 21.90 3.70 36.68 41.34
2.378 1.126 .705 .104 1.344 1.750 .862 .146 1.444 1.628
20 63.40 31.77 22.45 3.44 37.25 49.14 25.10 3.70 39.83 46.04
2.496 1.251 .884 .135 1.467 1.935 .988 .146 1.568 1.813
22 63.40 34.95 22.45 3.44 40.45 52.24 28.20 3.70 43.03 49.24
2.496 1.376 .884 .135 1.593 2.057 1.110 .146 1.694 1.939
24 63.40 38.12 23.30 3.44 43.65 55.54 31.40 3.70 46.18 52.74
2.496 1.501 .917 .135 1.719 2.187 1.236 .146 1.818 2.076
shell L Max ABCDFGMPS
size solder Max Max Max Max Max Max Max Max
crimp
solder
07 G
crimp
07 RG VG 95328 T
Jam nut receptacle with removable
straight backshell for screen termination and heatshrink sleeving
08 62.20 12.03 11.90 2.64 16.30 26.94 7.45 3.60 19.29 23.94
2.449 .474 .469 .104 .642 1.061 .293 .142 .759 .943
10 62.20 15.01 17.90 2.64 18.30 30.14 10.30 3.60 22.38 26.94
2.449 .591 .705 .104 .720 1.187 .406 .142 .881 1.061
12 62.20 19.07 17.90 2.64 22.30 34.94 13.20 3.60 27.13 31.74
2.449 .751 .705 .104 .878 1.376 .520 .142 1.068 1.250
14 62.40 22.25 17.90 2.64 25.30 38.04 16.50 3.60 30.33 34.94
2.457 .876 .705 .104 .996 1.498 .650 .142 1.194 1.376
16 62.40 25.42 17.90 2.64 28.30 41.24 19.35 3.60 33.48 38.24
2.457 1.001 .705 .104 1.114 1.624 .762 .142 1.318 1.506
18 62.40 28.60 17.90 2.64 32.30 44.44 21.60 3.60 36.68 41.34
2.457 1.126 .705 .104 1.272 1.750 .850 .142 1.444 1.628
20 67.50 31.77 22.45 3.44 34.30 49.14 24.80 3.60 39.83 46.04
2.657 1.251 .884 .135 1.350 1.935 .976 .142 1.568 1.813
22 67.50 34.95 22.45 3.44 38.30 52.24 27.90 3.60 43.03 49.24
2.657 1.376 .884 .135 1.508 2.057 1.098 .142 1.694 1.939
24 67.50 38.12 23.30 3.44 41.30 55.54 31.00 3.60 46.18 52.74
2.657 1.501 .917 .135 1.626 2.187 1.220 .142 1.818 2.076
shell L Max ABCDFGMPS
size solder Max Max Max Max Max Max Max Max
crimp
ØF
L
C
M
B
P
S
ØD
ØG
ØA
ØF
L
CM
B
P
S
ØD
ØG
ØA
ØF
L
CM
B
P
S
ØD
ØG
ØA
26482 Series I
Solder Connectors
180
solder
HE 301 B 02 E
02 E MS 3112 E
VG 95328 H
crimp
HE 301 B 02 R
02 R MS 3122 E
VG 95328 C
Square flange receptacle not accepting backshell
solder
07 A HE 301 B 07 A
Jam nut receptacle not accepting backshell
solder
01 E HE 301 B 01 E
MS 3111 E
crimp
01 R HE 301 B 01 R
MS 3121 E
Cable connecting receptacle with backnut
0825.18 32.35 12.03 11.70 1.32 10.84 15.09 20.99 3.13
.991 1.274 .474 .461 .052 .427 .594 .826 .123
10 25.10 32.35 15.01 11.70 1.32 13.99 18.26 24.19 3.13
.988 1.274 .591 .461 .052 .551 .719 .952 .123
12 25.10 32.35 19.07 11.70 1.32 17.37 20.62 26.54 3.13
.988 1.274 .751 .461 .052 .684 .812 1.045 .123
14 25.10 32.35 22.25 11.70 1.32 20.57 23.00 28.89 3.13
.988 1.274 .876 .461 .052 .810 .906 1.137 .123
1625.10 32.35 25.42 11.70 1.32 23.72 24.61 31.29 3.13
.988 1.274 1.001 .461 .052 .934 .969 1.232 .123
1825.10 32.35 28.60 11.70 1.32 26.69 26.97 33.69 3.13
.988 1.274 1.126 .461 .052 1.051 1.062 1.326 .123
2026.67 33.95 31.77 14.35 2.15 29.89 29.36 36.89 3.13
1.050 1.337 1.251 .565 .085 1.177 1.156 1.452 .123
22 26.67 33.95 34.95 14.35 2.15 33.04 31.75 39.99 3.13
1.050 1.337 1.376 .565 .085 1.301 1.250 1.574 .123
24 26.67 33.95 38.12 15.20 2.15 36.24 34.92 43.15 3.81
1.050 1.337 1.501 .598 .085 1.427 1.375 1.699 .150
shell L Max ABCD
EFJ
size
solder crimp
Max Max Max Max
08 25.18 12.03 17.90 2.64 26.94 19.29 23.94
.991 .474 .705 .104 1.061 .759 .943
10 25.10 15.01 17.90 2.64 30.14 22.38 26.94
.988 .591 .705 .104 1.187 .881 1.061
12 25.10 19.07 17.90 2.64 34.94 27.13 31.74
.988 .751 .705 .104 1.376 1.068 1.250
14 25.10 22.25 17.90 2.64 38.04 30.33 34.94
.988 .876 .705 .104 1.498 1.194 1.376
16 25.10 25.42 17.90 2.64 41.24 33.48 38.24
.988 1.001 .705 .104 1.624 1.318 1.506
18 25.10 28.60 17.90 2.64 44.44 36.68 41.34
.988 1.126 .705 .104 1.750 1.444 1.628
20 26.67 31.77 22.45 3.44 49.14 39.83 46.04
1.050 1.251 .884 .135 1.935 1.568 1.813
22 26.67 34.95 22.45 3.44 52.24 43.03 49.24
1.050 1.376 .884 .135 2.057 1.694 1.939
24 26.67 38.12 23.30 3.44 55.54 46.18 52.74
1.050 1.501 .917 .135 2.187 1.818 2.076
shell L Max ABCFPS
size solder Max Max Max Max Max
08 32.70 32.00 12.03 10.60 2.10 13.50 24.24 20.99
1.287 1.260 .474 .417 .083 .531 .954 .826
10 32.70 32.00 15.01 10.60 2.10 16.70 27.44 24.19
1.287 1.260 .591 .417 .083 .657 1.080 .952
12 32.70 32.00 19.07 10.60 2.10 19.90 29.79 26.54
1.287 1.260 .751 .417 .083 .783 1.173 1.045
14 32.70 32.00 22.25 10.60 2.10 23.40 32.10 28.89
1.287 1.260 .876 .417 .083 .921 1.264 1.137
16 32.70 32.00 25.42 10.60 2.10 26.60 34.59 31.29
1.287 1.260 1.001 .417 .083 1.047 1.362 1.232
18 32.70 32.00 28.60 10.60 2.10 29.50 36.94 33.69
1.287 1.260 1.126 .417 .083 1.161 1.454 1.326
20 34.50 33.40 31.77 13.85 2.65 32.70 40.14 36.89
1.358 1.315 1.251 .545 .104 1.287 1.580 1.452
22 34.50 33.40 34.95 13.85 2.65 36.00 43.24 40.00
1.358 1.315 1.376 .545 .104 1.417 1.702 1.575
24 34.50 33.40 38.12 14.70 2.65 39.10 46.44 43.29
1.358 1.315 1.501 .579 .104 1.539 1.828 1.704
shell L Max ABCDFP
size solder crimp Max Max Max Max Max
L
øD
øA
F
E
4 holes øJ
BC
L
øA
S
P
BC
LP
øA
øD
BCøF
øF
26482 Series I
Solder Connectors
181
solder
HE 301 B 01 EC
01 EC MS 3111 F
01 AC HE 301 B 01 AC
crimp
HE 301 B 01 RC
01 RC MS 3121 F
Cable connecting receptacle with straight cable clamp
solder
HE 301 B 01 P
01 P MS 3111 P
crimp
HE 301 B 01 RP
01 RP MS 3121 P
Cable connecting receptacle with straight backshell for potting
08 36.20 41.70 12.03 10.60 2.10 15.34 24.24 10.46 20.99
1.425 1.642 .474 .417 .083 .604 .954 .412 .826
10 36.20 41.70 15.01 10.60 2.10 17.70 27.44 13.55 24.19
1.425 1.642 .591 .417 .083 .697 1.080 .533 .952
12 36.20 41.70 19.07 10.60 2.10 21.69 29.79 13.96 26.54
1.425 1.642 .751 .417 .083 .854 1.173 .550 1.045
14 36.20 41.70 22.25 10.60 2.10 23.90 32.10 17.42 28.89
1.425 1.642 .876 .417 .083 .941 1.264 .686 1.137
16 36.20 41.70 25.42 10.60 2.10 27.00 34.59 20.56 31.29
1.425 1.642 1.001 .417 .083 1.063 1.362 .809 1.232
18 36.91 44.46 28.60 10.60 2.10 30.50 36.94 23.66 33.69
1.453 1.750 1.126 .417 .083 1.201 1.454 .931 1.326
20 43.80 50.93 31.77 13.85 2.65 33.65 40.15 23.92 36.89
1.724 2.005 1.251 .545 .104 1.325 1.581 .942 1.452
22 43.80 50.93 34.95 13.85 2.65 37.10 42.24 25.52 40.00
1.724 2.005 1.376 .545 .104 1.461 1.663 1.005 1.575
24 43.80 50.93 38.12 14.70 2.65 40.00 46.44 32.00 43.29
1.724 2.005 1.501 .579 .104 1.575 1.828 1.260 1.704
shell L Max ABC DF GP
size solder crimp Max Max Max Max Max Max
solder
01 A HE 301 B 01 A
crimp
01 RA HE 301 B 01 RA
Cable connecting receptacle with straight adapter
08 48.00 47.30 12.03 10.60 2.10 19.90 24.24 3.50 20.99
1.890 1.862 .474 .417 .083 .783 .954 .138 .826
10 48.00 47.30 15.01 10.60 2.10 21.50 27.44 5.00 24.19
1.890 1.862 .591 .417 .083 .846 1.080 .197 .952
12 48.00 47.30 19.07 10.60 2.10 25.00 29.79 8.20 26.54
1.890 1.862 .751 .417 .083 .984 1.173 .323 1.045
1448.00 47.30 22.25 10.60 2.10 27.80 32.10 10.00 28.89
1.890 1.862 .876 .417 .083 1.094 1.264 .394 1.137
1651.00 50.50 25.42 10.60 2.10 29.40 34.59 13.00 31.29
2.008 1.988 1.001 .417 .083 1.157 1.362 .512 1.232
1851.00 50.50 28.60 10.60 2.10 35.30 36.94 16.00 33.69
2.008 1.988 1.126 .417 .083 1.390 1.454 .630 1.326
20 53.00 51.50 31.77 13.85 2.65 35.30 40.14 16.00 36.89
2.087 2.028 1.251 .545 .104 1.390 1.580 .630 1.452
22 53.00 51.50 34.95 13.85 2.65 41.10 43.24 19.30 40.00
2.087 2.028 1.376 .545 .104 1.618 1.702 .760 1.575
2453.00 51.50 38.12 14.70 2.65 42.40 46.44 20.60 43.29
2.087 2.028 1.501 .579 .104 1.669 1.828 .811 1.704
shell L Max ABC DF GP
size solder crimp Max Max Max Max Max Max
08 41.00 12.03 10.60 2.10 14.50 24.24 9.10
1/2 28
20.99
1.614 .474 .417 .083 .571 .954 .358 .826
10 41.00 15.01 10.60 2.10 18.70 27.44 12.08
5/8 24
24.19
1.614 .591 .417 .083 .736 1.080 .476 .952
12 41.00 19.07 10.60 2.10 21.70 29.79 15.25
3/4 20
26.54
1.614 .751 .417 .083 .854 1.173 .600 1.045
14 41.00 22.25 10.60 2.10 25.10 32.10 18.15
7/8 20
28.89
1.614 .876 .417 .083 .988 1.264 .715 1.137
16 41.00 25.42 10.60 2.10 28.13 34.59 21.32
1-20
31.29
1.614 1.001 .417 .083 1.107 1.362 .839 1.232
18 41.00 28.60 10.60 2.10 31.38 36.94 24.32
1-3/16 18
33.69
1.614 1.126 .417 .083 1.235 1.454 .957 1.326
20 44.00 31.77 13.85 2.65 34.30 40.15 26.73
1-3/16 18
36.89
1.732 1.251 .545 .104 1.350 1.581 1.052 1.452
22 44.00 34.95 13.85 2.65 37.60 42.24 30.67
1-7/16 18
40.00
1.732 1.376 .545 .104 1.480 1.663 1.207 1.575
24 44.00 38.12 14.70 2.65 40.70 46.44 33.08
1-7/16 l8
43.29
1.732 1.501 .579 .104 1.602 1.828 1.302 1.704
shell L Max BCDFG KP
size
solder
AMax Max Max Max Max
Threading
Max
crimp
UNEF 2 A
L
øD
øA
øG
D
P
øF
BC
L
øA
øG
øD
P
øF
BC
L
øA
øG
K
øD
P
øF
BC
26482 Series I
Solder Connectors
182
solder
01 T
crimp
01 RT
Cable connecting receptacle with straight backshell for heatshrink sleeving
0836.70 36.00 12.03 10.60 2.10 15.35 24.24 7.20 6.70 20.99 3.70
1.445 1.417 .474 .417 .083 .604 .954 .283 .264 .826 .146
10 36.70 36.00 15.01 10.60 2.10 18.15 27.44 10.20 9.40 24.19 3.70
1.445 1.417 .591 .417 .083 .715 1.080 .402 .370 .952 .146
12 36.70 36.00 19.07 10.60 2.10 23.45 29.70 13.20 11.95 26.54 3.70
1.445 1.417 .751 .417 .083 .923 1.169 .520 .470 1.045 .146
1436.70 36.00 22.25 10.60 2.10 24.25 32.10 16.10 15.15 28.89 3.70
1.445 1.417 .876 .417 .083 .955 1.264 .634 .596 1.137 .146
1639.00 38.30 25.42 10.60 2.10 29.55 34.59 19.25 18.05 31.29 3.70
1.535 1.508 1.001 .417 .083 1.163 1.362 .758 .711 1.232 .146
1839.00 38.30 28.60 10.60 2.10 31.75 36.94 21.30 19.95 33.69 3.70
1.535 1.508 1.126 .417 .083 1.250 1.454 .839 .785 1.326 .146
2045.30 44.20 31.77 13.85 2.65 35.85 40.15 24.40 23.05 36.89 3.70
1.783 1.740 1.251 .545 .104 1.411 1.581 .961 .907 1.452 .146
22 45.30 44.20 34.95 13.85 2.65 38.20 42.24 27.50 25.55 40.00 3.70
1.783 1.740 1.376 .545 .104 1.504 1.663 1.083 1.006 1.575 .146
24 44.00 42.60 38.12 14.70 2.65 41.30 46.44 30.60 28.65 43.29 3.70
1.732 1.677 1.501 .579 .104 1.626 1.828 1.205 1.128 1.704 .146
shell
L Max ABC D F G Max PM
size solder crimp
Max Max Max Max
solder crimp
Max Max
solder
01 M
crimp
01 RM
Cable connecting receptacle with removable straight backshell for heatshrink sleeving
08 50.00 12.03 10.60 2.10 13.55 24.24 7.05 20.99 3.50
1.969 .474 .417 .083 .533 .954 .278 .826 .138
10 50.00 15.01 10.60 2.10 15.35 27.44 9.90 24.19 3.50
1.969 .591 .417 .083 .604 1.080 .390 .952 .138
12 50.00 19.07 10.60 2.10 19.48 29.79 12.60 26.54 3.50
1.969 .751 .417 .083 .767 1.173 .496 1.045 .138
14 50.00 22.25 10.60 2.10 21.30 32.10 15.90 28.89 3.50
1.969 .876 .417 .083 .839 1.264 .626 1.137 .138
16 50.00 25.42 10.60 2.10 24.50 34.59 18.95 31.29 3.50
1.969 1.001 .417 .083 .965 1.362 .746 1.232 .138
18 50.00 28.60 10.60 2.10 26.45 36.94 20.90 33.69 3.50
1.969 1.126 .417 .083 1.041 1.454 .823 1.326 .138
20 53.30 31.77 13.85 2.65 30.75 40.15 23.70 36.89 3.50
2.098 1.251 .545 .104 1.211 1.581 .933 1.452 .138
22 53.30 34.95 13.85 2.65 34.24 42.24 26.60 40.00 3.50
2.098 1.376 .545 .104 1.348 1.663 1.047 1.575 .138
24 53.30 38.12 14.70 2.65 36.47 46.44 29.30 43.29 3.50
2.098 1.501 .579 .104 1.436 1.828 1.154 1.704 .138
shell L Max ABCD FG PM
size
solder
Max Max Max Max Max Max Max
crimp
solder
01 T
crimp
01 RT
Cable connecting receptacle with removable straight backshell
for screen termination and heatshrink sleeving (38 and 42 suffix)
08 51.60 12.03 10.60 2.10 18.25 24.24 7.45 3.70 20.99
2.031 .474 .417 .083 .719 .954 .293 .146 .826
10 51.60 15.01 10.60 2.10 20.25 27.44 9.00 3.70 24.19
2.031 .591 .417 .083 .797 1.080 .354 .146 .952
12 51.60 19.07 10.60 2.10 24.75 29.79 13.30 3.70 26.54
2.031 .751 .417 .083 .974 1.173 .524 .146 1.045
14 51.60 22.25 10.60 2.10 27.75 32.10 16.50 3.70 28.89
2.031 .876 .417 .083 1.093 1.264 .650 .146 1.137
16 51.60 25.42 10.60 2.10 30.05 34.59 18.50 3.70 31.29
2.031 1.001 .417 .083 1.183 1.362 .728 .146 1.232
18 52.00 28.60 10.60 2.10 34.15 36.94 21.90 3.70 33.69
2.047 1.126 .417 .083 1.344 1.454 .862 .146 1.326
20 55.10 31.77 13.85 2.65 37.25 40.15 25.10 3.70 36.89
2.169 1.251 .545 .104 1.467 1.581 .988 .146 1.452
22 55.10 34.95 13.85 2.65 40.45 42.24 28.20 3.70 40.00
2.169 1.376 .545 .104 1.593 1.663 1.110 .146 1.575
24 55.10 38.12 14.70 2.65 43.65 46.44 31.40 3.70 43.29
2.169 1.501 .579 .104 1.719 1.828 1.236 .146 1.704
shell L Max ABCD FGMP
size
solder
Max Max Max Max Max Max Max
crimp
L
øA
øG
øD
P
øF
BC
M
L
øA
øG
øD
P
øF
BCM
L
øA
øG
øD
P
øF
BCM
26482 Series I
Solder Connectors
183
solder
01 G
crimp
01 RG
Cable connecting receptacle with removable straight backshell
for screen termination and heatshrink sleeving
0854.00 12.03 10.60 2.10 16.30 24.24 7.45 3.60 20.99
2.126 .474 .417 .083 .642 .954 .293 .142 .826
1054.00 15.01 10.60 2.10 18.30 27.44 10.30 3.60 24.19
2.126 .591 .417 .083 .720 1.080 .406 .142 .952
12 54.00 19.07 10.60 2.10 22.30 29.79 13.20 3.60 26.54
2.126 .751 .417 .083 .878 1.173 .520 .142 1.045
14 54.00 22.25 10.60 2.10 25.30 32.10 16.50 3.60 28.89
2.126 .876 .417 .083 .996 1.264 .650 .142 1.137
16 54.00 25.42 10.60 2.10 28.30 34.59 19.35 3.60 31.29
2.126 1.001 .417 .083 1.114 1.362 .762 .142 1.232
18 54.00 28.60 10.60 2.10 32.30 36.94 21.60 3.60 33.69
2.126 1.126 .417 .083 1.272 1.454 .850 .142 1.326
20 59.30 31.77 13.85 2.65 34.30 40.15 24.80 3.60 36.89
2.335 1.251 .545 .104 1.350 1.581 .976 .142 1.452
22 59.30 34.95 13.85 2.65 38.30 42.24 27.90 3.60 40.00
2.335 1.376 .545 .104 1.508 1.663 1.098 .142 1.575
24 59.30 38.12 14.70 2.65 41.30 46.44 31.00 3.60 43.29
2.335 1.501 .579 .104 1.626 1.828 1.220 .142 1.704
shell L Max ABCD FG MP
size
solder
Max Max Max Max Max Max Max
crimp
solder
01 J HE 301 B 01 J
Cable connecting receptacle with straight sealing gland backshell
solder
01 JC MS 3111 J
Cable connecting receptacle with straight sealing gland and cable clamp backshell
08 47.60 12.03 10.60 2.10 14.40 24.24 5.02 5.84 20.99
1.874 .474 .417 .083 .567 .954 .198 .230 .826
10 47.60 15.01 10.60 2.10 17.60 27.44 5.94 6.76 24.19
1.874 .591 .417 .083 .693 1.080 .234 .266 .952
12 48.70 19.07 10.60 2.10 21.10 29.79 9.34 10.16 26.54
1.917 .751 .417 .083 .831 1.173 .368 .400 1.045
14 53.50 22.25 10.60 2.10 24.40 32.10 11.32 12.14 28.89
2.106 .876 .417 .083 .961 1.264 .446 .478 1.137
16 59.00 25.42 10.60 2.10 27.60 34.59 14.73 15.55 31.29
2.323 1.001 .417 .083 1.087 1.362 .580 .612 1.232
18 65.00 28.60 10.60 2.10 30.80 36.94 16.00 16.82 33.69
2.559 1.126 .417 .083 1.213 1.454 .630 .662 1.326
20 79.10 31.77 13.85 2.65 34.10 40.15 16.89 17.71 36.89
3.114 1.251 .545 .104 1.343 1.581 .665 .697 1.452
22 80.00 34.95 13.85 2.65 37.30 42.24 17.78 18.60 40.00
3.150 1.376 .545 .104 1.469 1.663 .700 .732 1.575
24 90.00 38.12 14.70 2.65 40.50 46.44 20.34 21.16 43.29
3.543 1.501 .579 .104 1.594 1.828 .801 .833 1.704
shell L Max ABCD F GP
size
solder
Max Max Max Max min Max Max
08 57.68 12.03 10.60 2.10 19.90 24.24 5.02 5.84 20.99
2.271 .474 .417 .083 .783 .954 .198 .230 .826
10 57.68 15.01 10.60 2.10 21.50 27.44 5.94 6.76 24.19
2.271 .591 .417 .083 .846 1.080 .234 .266 .952
12 61.24 19.07 10.60 2.10 25.00 29.79 9.34 10.16 26.54
2.411 .751 .417 .083 .984 1.173 .368 .400 1.045
14 66.01 22.25 10.60 2.10 27.80 32.10 11.32 12.14 28.89
2.599 .876 .417 .083 1.094 1.264 .446 .478 1.137
16 74.75 25.42 10.60 2.10 29.40 34.59 14.73 15.50 31.29
2.943 1.001 .417 .083 1.157 1.362 .580 .610 1.232
18 80.57 28.60 10.60 2.10 35.30 36.94 16.00 16.82 33.69
3.172 1.126 .417 .083 1.390 1.454 .630 .662 1.326
20 91.69 31.77 13.85 2.65 35.30 40.15 16.89 17.71 36.89
3.610 1.251 .545 .104 1.390 1.581 .665 .697 1.452
22 95.66 34.95 13.85 2.65 41.10 42.24 17.78 18.60 40.00
3.766 1.376 .545 .104 1.618 1.663 .700 .732 1.575
24 101.22 38.12 14.70 2.65 42.40 46.44 20.34 21.16 43.29
3.985 1.501 .579 .104 1.669 1.828 .801 .833 1.704
shell L Max ABCD F GP
size
solder
Max Max Max Max min Max Max
L
øA
øG
øD
P
øF
BCM
L
øA
øG
øD
P
øF
BC
L
øA
øG
øD
P
øF
BC
26482 Series I
Solder Connectors
184
solder
HE 301 B 06 E
06 E MS 3116 E
crimp
HE 301 B 06 R
06 R MS 3126 E
Plug with backnut
solder
HE 301 B 06 EC
06 EC MS 3116 F
06 AC HE 301 B 06 AC
crimp
HE 301 B 06 RC
06 RC MS 3126 F
VG 95328 K
Plug with straight cable clamp
solder
06 P HE 301 B 06 P
MS 3116 P
crimp
06 RP HE 301 B 06 RP
MS 3126 P
Plug with straight backshell for potting
08 32.54 32.00 19.05 13.50
1.281 1.260 .750 .531
1032.54 32.00 21.80 16.70
1.281 1.260 .858 .657
1232.54 32.00 26.15 19.90
1.281 1.260 1.030 .783
1432.54 32.00 29.35 23.40
1.281 1.260 1.156 .921
16 32.54 32.00 32.50 26.60
1.281 1.260 1.280 1.047
18 32.54 32.00 35.30 29.60
1.281 1.260 1.390 1.165
20 33.30 32.10 38.85 32.70
1.311 1.264 1.530 1.287
2233.30 32.10 42.05 36.00
1.311 1.264 1.656 1.417
2433.30 32.10 45.10 39.10
1.311 1.264 1.776 1.539
shell size L Max AD
solder crimp Max Max
08 48.00 47.30 19.05 19.90 3.50
1.890 1.862 .750 .783 .138
10 48.00 47.30 21.80 21.50 5.00
1.890 1.862 .858 .846 .197
12 48.00 47.30 26.15 25.00 8.20
1.890 1.862 1.030 .984 .323
14 48.00 47.30 29.35 27.80 10.00
1.890 1.862 1.156 1.094 .394
16 51.00 50.50 32.50 29.40 13.00
2.008 1.988 1.280 1.157 .512
18 51.00 50.50 35.30 35.30 16.00
2.008 1.988 1.390 1.390 .630
20 52.00 50.20 38.85 35.30 16.00
2.047 1.976 1.530 1.390 .630
22 52.00 50.20 42.05 41.10 19.30
2.047 1.976 1.656 1.618 .760
24 52.00 50.20 45.10 42.40 20.60
2.047 1.976 1.776 1.669 .811
shell size L Max ADG
solder crimp Max Max
08 36.20 42.10 19.05 15.34 10.46
1.425 1.657 .750 .604 .412
10 36.20 42.10 21.80 17.70 13.55
1.425 1.657 .858 .697 .533
12 36.20 42.10 26.15 21.69 13.96
1.425 1.657 1.030 .854 .550
14 36.20 42.10 29.35 23.90 17.42
1.425 1.657 1.156 .941 .686
16 36.20 42.10 32.50 27.00 20.56
1.425 1.657 1.280 1.063 .809
18 37.70 45.40 35.30 30.50 23.66
1.484 1.787 1.390 1.201 .931
20 42.40 50.00 38.85 33.65 23.92
1.669 1.969 1.530 1.325 .942
22 42.40 50.00 42.05 37.10 25.52
1.669 1.969 1.656 1.461 1.005
24 42.85 50.00 45.10 40.00 32.00
1.687 1.969 1.776 1.575 1.260
shell size L Max ADG
solder crimp Max Max Max
LøA
øD
LøA
øG
D
LøA
øD
øG
26482 Series I
Solder Connectors
185
solder
06 A HE 301 B 06 A
crimp
06 RA HE 301 B 06 RA
Plug with straight adapter
solder
06 T
crimp
06 RT VG 95328 J
Plug with straight backshell for heatshrink sleeving
solder
06 M
crimp
06 RM
Plug with removable straight backshell for heatshrink sleeving
0841.00 41.00 19.05 14.50 9.10 1/2 28
1.614 1.614 .750 .571 .358
10 41.00 41.00 21.80 18.70 12.08 5/8 24
1.614 1.614 .858 .736 .476
12 41.00 41.00 26.15 21.70 15.25 3/4 20
1.614 1.614 1.030 .854 .600
1441.00 41.00 29.35 25.10 18.15 7/8 20
1.614 1.614 1.156 .988 .715
1641.00 41.00 32.50 28.13 21.32 1-20
1.614 1.614 1.280 1.107 .839
18 41.00 41.00 35.30 31.38 24.32 1-3/16 18
1.614 1.614 1.390 1.235 .957
20 44.00 43.30 38.85 34.30 26.73 1-3/16 18
1.732 1.705 1.530 1.350 1.052
22 44.00 43.30 42.05 37.60 30.67 1-7/16 18
1.732 1.705 1.656 1.480 1.207
24 44.00 43.50 45.10 40.70 33.08 1-7/16 18
1.732 1.713 1.776 1.602 1.302
shell size L Max AD GK
solder crimp Max Max Max
Threading UNEF 2 A
08 50.00 19.05 13.55 7.05 3.50
1.969 .750 .533 .278 .138
10 50.00 21.80 15.35 9.90 3.50
1.969 .858 .604 .390 .138
12 50.00 26.15 19.48 12.60 3.50
1.969 1.030 .767 .496 .138
14 50.00 29.35 21.30 15.90 3.50
1.969 1.156 .839 .626 .138
16 50.00 32.50 24.50 18.95 3.50
1.969 1.280 .965 .746 .138
18 50.00 35.30 26.45 20.90 3.50
1.969 1.390 1.041 .823 .138
20 52.00 38.85 30.73 23.70 3.50
2.047 1.530 1.210 .933 .138
22 52.00 42.05 34.24 26.60 3.50
2.047 1.656 1.348 1.047 .138
24 52.00 45.10 36.47 29.30 3.50
2.047 1.776 1.436 1.154 .138
shell size L Max ADGM
solder/crimp
Max Max Max Max
08 36.70 36.00 19.05 15.35 7.20 6.70 3.70
1.445 1.417 .750 .604 .283 .264 .146
10 36.70 36.00 21.80 18.15 10.20 9.40 3.70
1.445 1.417 .858 .715 .402 .370 .146
12 36.70 36.00 26.15 23.45 13.20 11.95 3.70
1.445 1.417 1.030 .923 .520 .470 .146
14 36.70 36.00 29.35 24.25 16.10 15.15 3.70
1.445 1.417 1.156 .955 .634 .596 .146
16 39.00 38.30 32.50 29.55 19.25 18.05 3.70
1.535 1.508 1.280 1.163 .758 .711 .146
18 39.00 38.30 35.30 31.75 21.30 19.95 3.70
1.535 1.508 1.390 1.250 .839 .785 .146
20 44.00 42.90 38.85 35.85 24.40 23.05 3.70
1.732 1.689 1.530 1.411 .961 .907 .146
22 44.00 42.90 42.05 38.20 27.50 25.55 3.70
1.732 1.689 1.656 1.504 1.083 1.006 .146
24 42.70 41.60 45.10 41.30 30.60 28.65 3.70
1.681 1.638 1.776 1.626 1.205 1.128 .146
shell L Max AD G Max M
size solder crimp Max solder crimp Max
LøA
K
øD
øG
L
M
øA
øD
øG
L
M
øA
øD
øG
26482 Series I
Solder Connectors
186
solder
06 J HE 301 B 06 J
Plug with straight sealing gland backshell
solder
06 JC MS 3116 J
Plug with straight sealing gland and cable clamp backshell
solder
08 EC HE 301 B 08 EC
crimp
08 RC HE 301 B 08 RC
Plug with elbow cable clamp backshell
08 50.10 19.05 19.70 3.50 16.00
1.972 .750 .776 .138 .630
10 52.60 21.80 21.20 5.00 18.00
2.071 .858 .835 .197 .709
12 54.90 26.15 24.20 8.20 19.50
2.161 1.030 .953 .323 .768
14 58.50 29.35 27.50 10.00 22.00
2.303 1.156 1.083 .394 .866
16 60.80 32.50 29.10 13.00 23.50
2.394 1.280 1.146 .512 .925
18 65.00 35.30 35.70 16.00 25.00
2.559 1.390 1.406 .630 .984
20 69.10 38.85 35.70 16.00 26.50
2.720 1.530 1.406 .630 1.043
22 71.00 42.05 39.70 19.30 28.00
2.795 1.656 1.563 .760 1.102
24 75.50 45.10 43.50 20.60 31.00
2.972 1.776 1.713 .811 1.220
shell size L Max AD
GR
solder/crimp
Max Max Max
0847.60 19.05 14.40 5.02 5.84
1.874 .750 .567 .198 .230
10 47.60 21.80 17.60 5.94 6.76
1.874 .858 .693 .234 .266
12 49.20 26.15 21.10 9.34 10.16
1.937 1.030 .831 .368 .400
14 54.00 29.35 24.40 11.32 12.14
2.126 1.156 .961 .446 .478
16 59.60 32.50 27.60 14.73 15.55
2.346 1.280 1.087 .580 .612
1865.60 35.30 30.80 16.00 16.80
2.583 1.390 1.213 .630 .661
2078.00 38.85 34.10 16.89 17.71
3.071 1.530 1.343 .665 .697
22 79.50 42.05 37.30 17.78 18.60
3.130 1.656 1.469 .700 .732
2490.00 45.10 40.50 20.34 21.16
3.543 1.776 1.594 .801 .833
shell size L Max AD G
solder Max Max min Max
08 57.68 19.05 19.90 5.02 5.84
2.271 .750 .783 .198 .230
10 57.68 21.80 21.50 5.94 6.76
2.271 .858 .846 .234 .266
12 61.24 26.15 25.00 9.34 10.16
2.411 1.030 .984 .368 .400
14 66.01 29.35 27.80 11.32 12.14
2.599 1.156 1.094 .446 .478
16 74.75 32.50 29.40 14.73 15.50
2.943 1.280 1.157 .580 .610
18 80.57 35.30 35.30 16.00 16.82
3.172 1.390 1.390 .630 .662
20 91.69 38.85 35.30 16.89 17.71
3.610 1.530 1.390 .665 .697
22 95.66 42.05 41.10 17.78 18.60
3.766 1.656 1.618 .700 .732
24 101.22 45.10 42.40 20.34 21.16
3.985 1.776 1.669 .801 .833
shell size L Max AD G
solder Max Max min Max
LøA
øD
øG
LøA
øD
øG
LøA
D
R
øG
26482 Series I
Solder Connectors
187
Plug with elbow backshell for potting
0840.70 19.05 8.10 11.70 11.30
1.602 .750 .319 .461 .445
10 44.90 21.80 11.30 14.35 14.50
1.768 .858 .445 .565 .571
12 46.90 26.15 13.30 15.90 17.70
1.846 1.030 .524 .626 .697
1449.20 29.35 16.10 16.30 20.10
1.937 1.156 .634 .642 .791
1650.60 32.50 16.90 19.30 22.80
1.992 1.280 .665 .760 .898
18 51.80 35.30 18.10 20.60 25.60
2.039 1.390 .713 .811 1.008
20 53.70 38.85 19.70 21.90 28.80
2.114 1.530 .776 .862 1.134
22 54.80 42.05 20.80 23.50 31.60
2.157 1.656 .819 .925 1.244
2458.20 45.10 24.20 30.15 35.20
2.291 1.776 .953 1.187 1.386
shell size L Max
solder/crimp
A
Max
G
Max
R
Max
S
Max
solder
08 P HE 301 B 08 P
crimp
08 RP HE 301 B 08 RP
solder
36 T
crimp
36 RT
solder
36 A
crimp
36 RA VG 95328 N
Screened plug with straight adapter
08 41.00 19.05 14.50 9.10 1/2 28
1.614 .750 .571 .358
10 41.00 21.80 18.70 12.08 5/8 24
1.614 .858 .736 .476
12 41.00 26.15 21.70 15.25 3/4 20
1.614 1.030 .854 .600
14 41.00 29.35 25.10 18.15 7/8 20
1.614 1.156 .988 .715
16 41.00 32.50 28.13 21.32 1-20
1.614 1.280 1.107 .839
18 41.00 35.30 31.38 24.32 1-3/16 18
1.614 1.390 1.235 .957
20 43.30 38.85 34.30 26.73 1-3/16 18
1.705 1.530 1.350 1.052
22 43.30 42.05 37.60 30.67 1-7/16 18
1.705 1.656 1.480 1.207
24 43.50 45.10 40.70 33.08 1-7/16 18
1.713 1.776 1.602 1.302
shell size L Max
solder/crimp
A
Max
D
Max
G
Max
K
threading UNEF 2 A
Screened plug with removable straight backshell
for screen termination and heatshrink sleeving (38 and 42 suffix)
08 51.60 19.05 18.25 7.45 3.70
2.031 .750 .719 .293 .146
10 51.60 21.80 20.25 9.00 3.70
2.031 .858 .797 .354 .146
12 51.60 26.15 24.75 13.30 3.70
2.031 1.030 .974 .524 .146
14 51.60 29.35 27.75 16.50 3.70
2.031 1.156 1.093 .650 .146
16 51.60 32.50 30.05 18.50 3.70
2.031 1.280 1.183 .728 .146
18 52.00 35.30 34.15 21.90 3.70
2.047 1.390 1.344 .862 .146
20 53.90 38.85 37.25 25.10 3.70
2.122 1.530 1.467 .988 .146
22 53.90 42.05 40.45 28.20 3.70
2.122 1.656 1.593 1.110 .146
24 53.90 45.10 43.65 31.40 3.70
2.122 1.776 1.719 1.236 .146
shell size L Max
solder/crimp
A
Max
D
Max
G
Max
M
Max
L
L
L
M
K
ØG
ØD
ØG
ØD
GS
ØA
ØA
ØA
R
26482 Series I
Solder Connectors
188
Screened plug with removable straight backshell
for screen termination and heatshrink sleeving
0854.00 19.05 16.30 7.45 3.60
2.126 .750 .642 .293 .142
1054.00 21.80 18.30 10.30 3.60
2.126 .858 .720 .406 .142
12 54.00 26.15 22.30 13.20 3.60
2.126 1.030 .878 .520 .142
1454.00 29.35 25.30 16.50 3.60
2.126 1.156 .996 .650 .142
1654.00 32.50 28.30 19.35 3.60
2.126 1.280 1.114 .762 .142
18 54.00 35.30 32.30 21.60 3.60
2.126 1.390 1.272 .850 .142
2058.00 38.85 34.30 24.80 3.60
2.283 1.530 1.350 .976 .142
22 58.00 42.05 38.30 27.90 3.60
2.283 1.656 1.508 1.098 .142
24 58.00 45.10 41.30 31.00 3.60
2.283 1.776 1.626 1.220 .142
shell size L Max
solder/crimp
A
Max
D
Max
G
Max
M
Max
solder
36 G
crimp
36 RG VG 95328 M
solder
76 U
crimp
76 RU VG 95328 U
solder
06 Z
crimp
06 RZ
Plug with straight adapter for electrical pitch access
08 -----
10 -----
12 43.00 26.15 9.00 24.80 11
1.693 1.030 .354 .976
14 45.00 29.35 11.00 28.80 16
1.772 1.156 .433 1.134
16 45.00 32.50 11.00 30.80 16
1.772 1.280 .433 1.213
18 46.00 35.30 12.00 40.80 21
1.811 1.390 .472 1.606
20 46.50 38.85 12.00 40.80 21
1.831 1.530 .472 1.606
22 46.50 42.05 12.00 40.80 21
1.831 1.656 .472 1.606
24 65.50 45.10 31.40 45.00 29
2.579 1.776 1.236 1.772
shell size L Max
solder/crimp
A
Max
B
Max
C
Max
D
threading PE
Screened plug with lock finger and short backshell
for screen termination and heatshrink sleeving
08 -------
10 -------
12 35.60 25.00 22.50 32.00 13.20 19.50 3.70
1.402 .984 .886 1.260 .520 .768 .146
14 35.60 29.00 25.50 32.00 16.10 21.00 3.70
1.402 1.142 1.004 1.260 .634 .827 .146
16 35.60 32.00 28.50 32.00 19.25 22.50 3.70
1.402 1.260 1.122 1.260 .758 .886 .146
18 -------
20 -------
22 -------
24 -------
shell
size
L Max
solder
crimp
A
Max
D
Max
H
Max
G
Max
E
Max
M
Max
2.8/0.098 min
ØG
ØC
D
ØD
ØAL
M
L
ØA
ØA
ØD
ØG
ØE
L
H
M
B
26482 Series I
Solder Connectors
189
square flange receptacle
02 H HE 301 B 02 H
08 12.03 21.42 27.09 15.09 13.84 14.27 6.97 3.13 11.24 1.67
.474 .843 1.067 .594 .545 .562 .274 .123 .443 .066
10 15.01 24.62 31.87 18.26 13.84 17.06 6.97 3.13 11.24 1.67
.591 .969 1.255 .719 .545 .672 .274 .123 .443 .066
1219.07 26.98 35.04 20.62 13.84 19.85 6.97 3.13 11.24 1.67
.751 1.062 1.380 .812 .545 .781 .274 .123 .443 .066
14 22.25 29.36 38.22 23.00 13.84 23.00 6.97 3.13 11.24 1.67
.876 1.156 1.505 .906 .545 .906 .274 .123 .443 .066
16 25.42 31.73 41.39 24.61 13.84 26.18 6.97 3.13 11.24 1.67
1.001 1.249 1.630 .969 .545 1.031 .274 .123 .443 .066
1828.60 34.12 44.57 26.97 13.84 29.36 6.97 3.13 11.24 1.67
1.126 1.343 1.755 1.062 .545 1.156 .274 .123 .443 .066
2031.77 37.20 47.74 29.36 15.42 31.74 6.99 3.13 12.00 2.48
1.251 1.465 1.880 1.156 .607 1.250 .275 .123 .472 .098
22 34.95 40.47 50.92 31.75 16.23 34.92 6.99 3.13 12.00 2.48
1.376 1.593 2.005 1.250 .639 1.375 .275 .123 .472 .098
24 38.12 43.66 55.69 34.92 17.04 38.10 6.19 3.81 12.81 2.48
1.501 1.719 2.193 1.375 .671 1.500 .244 .150 .504 .098
shell
size
D
Max
EFGH
Max
JM
Max
N
Max
AC
Max
Hermetic connectors
08 12.03 24.07 27.37 14.26 20.53 17.93 13.33
.474 .948 1.078 .561 .808 .706 .525
10 15.01 27.22 30.57 17.43 20.53 17.93 16.51
.591 1.072 1.204 .686 .808 .706 .650
12 19.07 32.00 35.32 22.19 20.53 17.93 20.63
.751 1.260 1.391 .874 .808 .706 .812
14 22.25 35.17 38.50 25.36 20.53 17.93 23.78
.876 1.385 1.516 .998 .808 .706 .936
16 25.42 38.35 41.67 28.54 20.53 17.93 26.93
1.001 1.510 1.641 1.124 .808 .706 1.060
18 28.60 41.52 44.85 31.71 20.53 17.93 30.10
1.126 1.635 1.766 1.248 .808 .706 1.185
20 31.77 46.27 49.62 34.89 26.10 22.70 33.28
1.251 1.822 1.954 1.374 1.028 .894 1.310
22 34.95 49.47 52.77 38.06 26.10 22.70 36.45
1.376 1.948 2.078 1.498 1.028 .894 1.435
24 38.12 52.62 55.97 41.24 26.93 23.54 39.63
1.501 2.072 2.204 1.624 1.060 .927 1.560
shell
size
C
Max
AD
Max
GL
Max
M
Max
P
08 12.03 16.40 8.19 13.84 14.27 10.69 0.76
.474 .646 .322 .545 .562 .421 .030
10 15.01 19.40 8.19 13.84 17.06 10.69 0.76
.591 .764 .322 .545 .672 .421 .030
12 19.07 21.80 8.19 13.84 19.83 10.69 0.76
.751 .858 .322 .545 .781 .421 .030
14 22.25 25.00 8.19 13.84 23.00 10.69 0.76
.876 .984 .322 .545 .906 .421 .030
16 25.42 28.10 8.19 13.84 26.18 10.69 0.76
1.001 1.106 .322 .545 1.031 .421 .030
18 28.60 31.30 8.19 13.84 29.36 10.69 0.76
1.126 1.232 .322 .545 1.156 .421 .030
20 31.77 33.70 8.16 15.42 31.74 12.32 0.76
1.251 1.327 .321 .607 1.250 .485 .030
22 34.95 36.90 8.16 16.23 34.92 12.32 0.76
1.376 1.453 .321 .639 1.375 .485 .030
24 38.12 40.10 7.36 17.04 38.10 13.12 0.76
1.501 1.579 .290 .671 1.500 .517 .030
shell
size
D
Max
AH
Max
FG
Max
M
Max
N
Max
jam nut receptacle
HE 301 B 07 H
07 H MS 3114 H
VG 95328 F
solder fixing receptacle
HE 301 B 1 H
IH MS 3113 H
VG 95328 G
C
ØD
ØD
ØA
ØG
H
F
MN
ØA
L
MG Øext
du filetage
P
C
F
MN
ØA
ØG
H
C
E
4 Holes ØJ ØD
E
C
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
26482 Series I
Solder Connectors
190
wire wrap version
straight spills version
08 12.03 11.70 1.32 10.84 15.09 20.99 12.42 3.13 20.50 9.46
.474 .461 .052 .427 .594 .826 .489 .123 .807 .372
1015.01 11.70 1.32 13.99 18.26 24.19 12.42 3.13 20.50 9.46
.591 .461 .052 .551 .719 .952 .489 .123 .807 .372
1219.07 11.70 1.32 17.37 20.62 26.54 12.42 3.13 20.50 9.46
.751 .461 .052 .684 .812 1.045 .489 .123 .807 .372
1422.25 11.70 1.32 20.57 23.00 28.89 12.42 3.13 20.50 9.46
.876 .461 .052 .810 .906 1.137 .489 .123 .807 .372
16 25.42 11.70 1.32 23.62 24.61 31.29 12.42 3.13 20.50 9.46
1.001 .461 .052 .930 .969 1.232 .489 .123 .807 .372
18 28.60 11.70 1.32 26.69 26.97 33.69 12.42 3.13 20.50 9.46
1.126 .461 .052 1.051 1.062 1.326 .489 .123 .807 .372
20 31.77 14.35 2.15 29.89 29.36 36.89 10.69 3.13 23.80 7.76
1.251 .565 .085 1.177 1.156 1.452 .421 .123 .937 .306
22 34.95 14.35 2.15 33.04 31.75 39.99 10.69 3.13 23.80 7.76
1.376 .565 .085 1.301 1.250 1.574 .421 .123 .937 .306
24 38.12 15.20 2.15 36.24 34.92 43.15 10.69 3.81 23.80 7.76
1.501 .598 .085 1.427 1.375 1.699 .421 .150 .937 .306
shell
size
C
Max
Ø D
Max
EF
Max
HJL
Max
T
AB
Max
Wire wrap and straight spills connectors
Square flange receptacle type 02 E
wire wrap version
straight spills version
08 12.03 17.90 2.64 26.94 12.42 20.64 19.29 23.94 9.46
.474 .705 .104 1.061 .489 .813 .759 .943 .372
10 15.01 17.90 2.64 30.14 12.42 20.64 22.38 26.95 9.46
.591 .705 .104 1.187 .489 .813 .881 1.061 .372
12 19.07 17.90 2.64 34.94 12.42 20.64 27.13 31.74 9.46
.751 .705 .104 1.376 .489 .813 1.068 1.250 .372
14 22.25 17.90 2.64 38.04 12.42 20.64 30.33 34.94 9.46
.876 .705 .104 1.498 .489 .813 1.194 1.376 .372
16 25.42 17.90 2.64 41.26 12.42 20.64 33.48 38.24 9.46
1.001 .705 .104 1.624 .489 .813 1.318 1.506 .372
18 28.60 17.90 2.64 44.44 12.42 20.64 36.68 41.34 9.46
1.126 .705 .104 1.750 .489 .813 1.444 1.628 .372
20 31.77 22.45 3.44 49.14 8.64 25.99 39.83 46.04 8.49
1.251 .884 .135 1.935 .340 1.023 1.568 1.813 .334
22 34.95 22.45 3.44 52.24 8.64 25.99 43.03 49.24 8.49
1.376 .884 .135 2.057 .340 1.023 1.694 1.939 .334
24 38.12 23.30 3.44 55.54 7.79 26.84 46.18 52.74 7.79
1.501 .917 .135 2.187 .307 1.057 1.818 2.076 .307
shell
size
AB
Max
C
Max
F
Max
HL
Max
P
Max
S
Max
T
Jam nut receptacle type 07 A
4 Holes ØJ
4 Holes ØJ
E
E
L
L
P
ØF
ØF
L
H
BC
BC
ØA
ØA
S
S
P
L
H
T
T
7
mini
7
mini
C
B
C
B
ØA
ØA
ØD
ØD
F
F
26482 Series I
Solder Connectors
191
specification for cap type and plating
shell size 8 10 12 14 16 18 20 22 24
part numbers for receptacle 02 03 04 05 27 06 07 08 09
part numbers for plug 10 11 12 13 28 14 15 16 17
basic series 8500 05 •••
Part numbers
Protective Caps
Type and plating
Cap type
receptacle cap plug cap
cap with chain and ring D 29 D 44 D D 02 D 29 D 44 D
cap with nylon cord and ring B 29 B 44 B B 02 B 29 B 44 B
cap with nylon cord and washer (shell 10, 12 and 14) ---E---
cap with nylon cord and washer H-- - - --
cap with chain and washer J-- - ---
olive green
cadmium
black
anodized nickel olive green
cadmium
white
cadmium
black
anodized nickel
08 16.80 19.84 132.00 128.00 --
.661 .781 5.197 5.039
10 19.80 19.84 132.00 128.00 132.00 14.00
.780 .781 5.197 5.039 5.197 .551
12 23.90 19.84 148.00 148.00 148.00 17.60
.941 .781 5.827 5.827 5.827 .693
14 27.00 19.84 148.00 148.00 148.00 20.80
1.063 .781 5.827 5.827 5.827 .819
16 30.20 19.84 148.00 148.00 --
1.189 .781 5.827 5.827
18 33.40 19.84 148.00 148.00 --
1.315 .781 5.827 5.827
20 36.50 21.44 168.00 153.00 --
1.437 .844 6.614 6.024
22 39.80 21.44 168.00 153.00 --
1.567 .844 6.614 6.024
24 42.90 22.22 168.00 153.00 --
1.689 .875 6.614 6.024
shell size Ø A
Maxi
B
Maxi
CDEØ F
Caps for plug
D
B
E
Ø3.5/ .138
C
B
B
D
E
ØF
B
ØA
ØA
ØA
Ø3.5/ .138
26482 Series I
Solder Connectors
192
08 19.00 21.44 84.00 77.00 14.80 80.00 84.00
.748 .844 3.307 3.031 .583 3.150 3.307
1021.80 21.44 84.00 77.00 17.90 80.00 84.00
.858 .844 3.307 3.031 .705 3.150 3.307
12 26.10 21.44 100.00 89.00 22.70 90.00 100.00
1.028 .844 3.937 3.504 .894 3.543 3.937
1429.30 21.44 100.00 89.00 25.90 90.00 100.00
1.154 .844 3.937 3.504 1.020 3.543 3.937
16 32.50 21.44 100.00 89.00 29.00 90.00 100.00
1.280 .844 3.937 3.504 1.142 3.543 3.937
1835.30 21.44 100.00 89.00 32.20 90.00 100.00
1.390 .844 3.937 3.504 1.268 3.543 3.937
20 38.80 21.44 116.00 102.00 35.40 110.00 116.00
1.528 .844 4.567 4.016 1.394 4.331 4.567
22 42.00 21.44 116.00 102.00 38.60 110.00 116.00
1.654 .844 4.567 4.016 1.520 4.331 4.567
2445.10 22.22 116.00 102.00 41.70 110.00 116.00
1.776 .875 4.567 4.016 1.642 4.331 4.567
Caps for receptacle
D
B
J H
0,93 18 8465 (MS 3191-1) MS 3191-20 A
0,60 20
20 0,38 22 8476-01 (M 22520 / 2-01) 8476-02 (M 22520 / 2-02)
0,21 24 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02)
1,91 14 8465 (MS 3191-1) MS 3191-16 A
16 1,34 16
0,93 18 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02)
contact sizes wire size
mm2AWG
part numbers
crimping tool locator
Tools
Crimping pliers
}
}
20 8500-29 B * 8500-36 A
crimp 16 8500-39 8500-38 A
20 8500-31 8500-31
for wire cap
16 or 8500-39 8500-37
8500-37
contact type contact size part numbers
insertion tools extraction tools
Insertion and extraction tools
20 8500-4144 grey
16 8500-479 blue
20 8500-4144 A (MS 3187 A 20) red
16 8500-4267 (MS 3187-16) blue
contact size part numbers colour profile
Filler plug
shell Ø A BCDJHK
size Max Max Max
Spare tube for tool : - 8500-36 A PN : 8500-1163 * Except 8-2, 8-3, 8-4, 12-14 contact layouts :
- 8500-38 A PN : 8500-1184 insertion tool 8500-93B
Ø3.5/.138
C
D
B
B
KH
BB
ØA
ØA
Ø J
Ø J
ØA
ØA
Ø3.5/.138
26482 Series I
Solder Connectors
193
0815.55 14.60 14.70 15.10 3.15 1.57 3.17 13.75 2.90
.612 .575 .579 .594 .124 .062 .125 .541 .114
10 18.80 17.75 17.50 18.26 3.15 1.57 3.17 16.95 2.90
.740 .699 .689 .719 .124 .062 .125 .667 .114
12 22.15 22.50 20.20 20.62 3.15 1.57 3.17 21.50 2.90
.872 .886 .795 .812 .124 .062 .125 .846 .114
1425.30 25.70 23.40 23.00 3.15 1.57 3.17 24.20 2.90
.996 1.012 .921 .906 .124 .062 .125 .953 .114
1628.45 28.85 26.60 24.60 3.15 1.57 3.17 27.35 2.90
1.120 1.136 1.047 .969 .124 .062 .125 1.077 .114
18 31.65 32.05 29.80 26.97 3.15 1.57 3.17 30.55 2.90
1.246 1.262 1.173 1.062 .124 .062 .125 1.203 .114
20 34.80 35.20 32.10 29.36 3.15 1.57 6.35 33.70 5.50
1.370 1.386 1.264 1.156 .124 .062 .250 1.327 .217
22 38.00 38.40 35.30 31.75 3.15 1.57 6.35 36.90 5.50
1.496 1.512 1.390 1.250 .124 .062 .250 1.453 .217
24 41.20 41.55 38.40 34.92 3.73 1.57 6.35 40.05 5.50
1.622 1.636 1.512 1.375 .147 .062 .250 1.577 .217
Panel cut-out
Accessories
shell ABCEJ N PX
size min Max min
08 12.03 20.99 15.09 3.13 11.70 1.32
.474 .826 .594 .123 .461 .052
10 15.01 24.19 18.26 3.13 11.70 1.32
.591 .952 .719 .123 .461 .052
12 19.07 26.54 20.62 3.13 11.70 1.32
.751 1.045 .812 .123 .461 .052
14 22.25 28.89 23.00 3.13 11.70 1.32
.876 1.137 .906 .123 .461 .052
16 25.42 31.29 24.61 3.13 11.70 1.32
1.001 1.232 .969 .123 .461 .052
18 28.60 33.69 26.97 3.13 11.70 1.32
1.126 1.326 1.062 .123 .461 .052
20 31.77 36.89 29.36 3.13 14.35 2.15
1.251 1.452 1.156 .123 .565 .085
22 34.95 39.99 31.75 3.13 14.35 2.15
1.376 1.574 1.250 .123 .565 .085
24 38.12 43.15 34.92 3.81 15.20 2.15
1.501 1.699 1.375 .150 .598 .085
Shell ACEJMN
size Max Max Max
88500-275 8500-4164 3330102 3330675
10 8500-276 8500-4165 3330103 3330670
12 8500-277 8500-4166 3330104 3330671
14 8500-278 8500-4167 3330105 3330672
16 8500-283 8500-4168 3330106 3331048
18 8500-279 8500-4169 3330107 3331049
20 8500-280 8500-4170 3330108 3331050
22 8500-281 8500-4171 3330109 3331051
24 8500-282 8500-4172 3330110 3331052
Shell gaskets for square flange receptacle gaskets for jam nut receptacle
size neoprene fairprene neoprene vitton (for hermetic receptacle)
Gaskets
08 8500-5585A 8500-5594
10 8500-5586A 8500-5595
12 8500-5587A 8500-5596
14 8500-5588A 8500-5597
16 8500-5589A 8500-5598
18 8500-5590A 8500-5599
20 8500-5591A 8500-5600
22 8500-5592A 8500-5601
24 8500-5593A 8500-5602
Shell size caps for receptacle caps for plug
Dummy receptacle
Plastic protective
caps for receptacle and plug
square flange receptacle jam nut receptacle
solder fixing receptacle
ØA
ØC
ØB
E
MN
E
4 Holes ØJ
ØA
C
XN
ØA
E
P
Re-usable fixing plate
Two, three or four-holes self-locking fixing-plates are available at SHTP. See page 126.
26482 Series I
Solder Connectors
194
manufactures specifications
polarization N, W, X, Y, Z
contact type P - male
S- female
Male - female square flange through bulkhead receptacle
contact layout please consult us
shell size 851 range
basic series EC 52 B ** ** PS *
Part numbers
contact type P - male
contact layout consult SHTP
Jam nut receptacle with front release straight spills
shell size 851 range
shell type 07A - jam nut receptacle
without backshell
basic series 851 07A ** ** P * SN0378
Part numbers
0833.20 1.60 14.30 15.10 20.60 12.00 3.20 27.30
1.307 .063 .563 .594 .811 .472 .126 1.075
10 33.20 1.60 14.30 18.30 23.80 15.00 3.20 31.80
1.307 .063 .563 .720 .937 .591 .126 1.252
12 33.20 1.60 14.30 20.60 26.20 19.05 3.20 35.10
1.307 .063 .563 .811 1.031 .750 .126 1.382
1433.20 1.60 14.30 23.00 28.60 22.23 3.20 38.50
1.307 .063 .563 .906 1.126 .875 .126 1.516
1633.20 1.60 14.30 24.60 30.90 25.40 3.20 41.30
1.307 .063 .563 .969 1.217 1.000 .126 1.626
18 33.20 1.60 14.30 27.00 33.30 28.60 3.20 44.70
1.307 .063 .563 1.063 1.311 1.126 .126 1.760
20 36.40 2.40 17.50 29.40 36.50 31.75 3.20 49.10
1.433 .094 .689 1.157 1.437 1.250 .126 1.933
21 36.40 2.40 17.50 30.60 38.50 33.85 3.20 51.20
1.433 .094 .689 1.205 1.516 1.333 .126 2.016
22 36.40 2.40 17.50 31.80 39.70 34.90 3.20 53.10
1.433 .094 .689 1.252 1.563 1.374 .126 2.091
2436.40 2.40 17.50 34.90 42.90 38.10 4.20 57.30
1.433 .094 .689 1.374 1.689 1.500 .165 2.256
shell ABCDEFGH
size
08 17.25 2.30 13.68 5.00 5.00 1.57 14.60 23.15 23.15 .60
.679 .091 .539 .197 .197 .062 .575 .911 .911 .024
10 17.25 2.30 13.68 5.00 5.00 1.57 17.70 16.80 26.45 .60
.679 .091 .539 .197 .197 .062 .697 .661 1.041 .024
12 17.25 2.30 13.68 5.00 5.00 1.57 22.70 20.90 31.20 .60
.679 .091 .539 .197 .197 .062 .894 .823 1.228 .024
14 17.25 2.30 13.68 5.00 5.00 1.57 25.70 24.10 34.40 .60
.679 .091 .539 .197 .197 .062 1.012 .949 1.354 .024
16 17.25 2.30 13.68 5.00 5.00 1.57 28.80 27.20 37.55 .60
.679 .091 .539 .197 .197 .062 1.134 1.071 1.478 .024
18 17.25 2.30 13.68 5.00 5.00 1.57 32.00 30.40 40.75 .60
.679 .091 .539 .197 .197 .026 1.260 1.197 1.604 0.24
20 18.85 2.50 13.79 5.00 6.60 1.57 35.20 33.60 45.50 .60
.742 .098 .543 .197 .260 .062 1.386 1.323 1.791 .024
22 18.55 2.50 13.79 5.00 6.60 1.57 38.40 36.80 48.70 .60
.742 .098 .543 .197 .260 .062 1.512 1.449 1.917 .024
24 18.85 2.50 13.79 5.00 5.90 1.57 41.50 39.90 51.85 .60
.742 .098 .543 .197 .232 .062 1.634 1.571 2.041 .024
shell ABCDE Max E min FGH J
size
polarization
A
C
D
4 holes ØG
AC
D
B
EØH
G
ØF
ØJ
E
ØH
B
ØF
26482 Series I
Solder Connectors
195
specification
07 olive-green cadmium plate (solder version)
08 olive-green cadmium plate (crimp version)
09 white cadmium plate (crimp and solder version)
obligatory suffix
orientation
normal (not included in part number) w, x, y, z, see table p ?
contact type
P= male - S= female
contact layout
see table p ?
shell size
8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24
backshell type
R/E-backnut
RC/EC - straitght cable clamp
RA/A - straitght adaptor
RP/P - straitght backshell for potting
RM/M - straitght removable backshell for heatshrink sleeving
RT/T - spécification 38 or 42
straight removable backshell for screen termination and heatshrink sleeving
RC/EC -90° cable clamp
RP/P - 90° backshell for potting
shell type
06- plug for use with straight backshell
08 - plug for use with 90° backshell
Push-pull locking plug
General characteristics
• Locking : by pushing on the coupling nut
• Unlocking : by pulling a lanyard
• Mounted : on all 851 receptacles
• Layouts and crimp solder contats : (see pages 7 and 11)
• Other characteristics : (see page 6)
basic series crimp version 856 - 06 R •• - •• P•50 - •
solder version 856 - 06 E •• - •• P•50 - •
Ordering information - Environmental connectors
26482 Series I
Solder Connectors
196
Dimensions Shell size 8 10 12 14 16 18 20 22 24
A 19,50 22,80 27,30 30,80 34,000 37,00 41,00 44,50 49,20
B 24,95 28,75 32,55 36,05 39,05 42,05 45,80 49,20 53,45
06 R E 32,00 32,00 32,00 32,00 32,00 32,00 31,80 31,80 31,80
06 RC E 47,30 47,30 47,30 47,30 50,50 50,50 49,90 49,90 49,90
06 RP E 42,10 42,10 42,10 42,10 42,10 45,40 49,80 49,80 49,80
06 RA E 41,00 41,00 41,00 41,00 41,00 41,00 43,00 43,00 43,20
06 RM E 50,00 50,00 50,00 50,00 50,00 50,00 51,70 51,70 51,70
E 50,00 50,00 50,00 50,00 50,000 50,00 51,70 51,70 51,70
E 50,10 52,60 54,90 58,50 60,80 65,00 68,80 71,20 76,20
16,00 18,00 19,50 22,00 23,50 25,00 26,50 28,00 31,00
E 40,70 44,90 47,00 49,20 50,60 51,80 53,10 54,50 57,90
11,00 14,35 15,90 16,30 19,30 20,60 21,90 23,50 30,15
06 RT
spécifications 38 or 42
D
max
D
max
08 RC
08 RP
Note : for backshells dimensions refer to values given in preceding pages
26482 Series I
Solder Connectors
197
8F51 filter connector
Overview
These connectors are derived from standard specifications MIL-C-26482 G series 1 - NFC 93422 (HE 301 B) - VG 95328.
They are intermountable and intermateable with standard connectors.
Different types of filters may be fitted in these connectors to eliminate RFI/EMI in different frequency ranges.
Built-in tubular filter offers following advantages :
• rational filtering on interferences at electronic equipment input or output,
• case screen-shielding efficiency is maintained,
• cost and volume saving as compared with the use of discrete filters wired down the line,
• 4 types of filter contacts are available,
• a wide choice of combinations of filter, unfiltered and grounded contacts.
An adaptor version is also a simple technique to equip existing systems which do not incorporate filters.
Electrical characteristics
• Max. current rating per contact : 3 A or 7 A depending on contact type
• Max. operating voltage : 100 or 200 V depending on filter
• Attenuation for HF filter contact : 35 dB min between 40 and 1000 MHz
• Attenuation for LF filter contact : 35 dB min between 10 and 1000 MHz
For this product, consult our FILTER CONNECTOR department.
Cadmium free plating
SOURIAU propose a 851 connector with cadmium free black zinc-nickel plating. This plating has been introduced in accordance with
European directive 76/769 EEC.
Reason :
• Reduction in level of heavy metal pollutants produced by cadmium.
• Reduction in health associated with the corrosive by products of cadmium.
Characteristics :
• Mechanical
- shell : aluminium alloy
- plating : zinc-nickel
• Electrical
- shell continuity : ≤2.5 mΩ
• Environmental
- salt spray : 200 hours
Part numbers :
• Solder version 851 00 E 8-3A P.54 zinc-nickel plating
• Crimp version 851 00 R 8-3A P.54 zinc-nickel plating
* See part numbers system
- page 8 (solder and crimp version)
- page 10 (straight spills ans wire-wrap versions)
This plating is available for shell type
- 00 : square flange receptacle accepting backshells
- 02 : square flange receptacle not accepting backshells
- 07 : jam nut receptacle accepting backshell
- 07A : jam nut receptacle not accepting backshells
- 06 : plug for use without straight backshell
- 36 : screened plug for use with straight backshells
Backshells, please consult us.
26482 Series I
Solder Connectors
198
• Notes:• Notes:
199
Push Pull Connectors
200
Push-Pull connectors
Introduction
This catalogue presents the push-pull connectors ranges for industrial applications.
These products are particularly suitable for high reliability and high quality applica-
tions where a simple yet fast method to connect/disconnect is required. Also
suitable for high endurance and ease of operation in very limited spaces. The
aesthetics of the product allows for perfect integration on front panel equipments.
SOURIAU offers 3 main series of metallic circular connectors :
•JBX series :basic push-pull series for signal transmission
•JKX series :environmental version of the JBX series sealed to IP68
•JDX series : environmentally sealed. Breakaway version.
Contents
Where and why push-pull............................................................................................201
Selection guide.............................................................................................................202
Push Pull Connectors
•Main features - Part number system...........................................................................203
•Shell types and dimensions .................................................................................204-206
•Keying..........................................................................................................................207
•Contact layouts ....................................................................................................208-210
•Options ........................................................................................................................211
• Technical characteristics .............................................................................................212
•Wiring and assembly instructions ........................................................................213-217
JBX Series
•Plug Assembly Instructions..................................................................................218-222
•Receptacle Assembly Instructions.......................................................................223-226
Environmentally Sealed Push Pull Connectors
•Main features - Part number system...........................................................................227
•Shell types and dimensions.........................................................................................228
•Keying - contact layouts..............................................................................................229
•Options ........................................................................................................................230
•Technical characteristics .............................................................................................231
•Wiring and assembly instructions ........................................................................232-235
JKX Series
•Plug Assembly Instructions..................................................................................236-241
•Receptacle Assembly Instructions.......................................................................242-245
Push Pull Connectors - Sealed Version Size 2
•Main features - Part number system...........................................................................246
•Shell types and dimensions.........................................................................................247
•Keying - contact layouts..............................................................................................248
•Technical characteristics .............................................................................................249
Sealed Breakaway Connector
•Main features - Part numbering system ......................................................................250
•Shell types and dimensions.........................................................................................251
•Contact layout and Keying ..........................................................................................252
•Technical characteristics ......................................................................................253-254
Accessories - Piece parts....................................................................................255-257
Toolings..................................................................................................................258-259
More about our know-how..........................................................................................260
Requirement form ........................................................................................................261
Conversion table ..........................................................................................................262
All dimensions are in mm
Medical
Telecommunications
Professional audio-video
Instrumentation
Where and Why
push-pull ?
lExtremely fast
and easy to use
lA thousand matings/
unmatings.
lEnhanced appearance
to add value to
equipment
lSpace saving
GPS
Push-Pull connectors
201
Selection Guide
202
Push-Pull
Unsealed Sealed
Multipin Multipin
Keyed
2 to 10 contacts
Keyed
2 to 19 contacts
Keyed
2 to 30
contacts
The locking of the plug into the receptacle
is achieved by a simple axial push on the
outer shell.
Connection cannot be broken by pulling
the cable or any other parts of the plug
than the outer shell.
To unmate the plug from the receptacle,
just pull axially the outer shell.
Push-pull locking system
Brass Brass Brass Brass and Aluminum
PEEK PEEK PEEK PEEK
Shielded
(55 dB up to 100 MHz)
Shielded
(55 dB up to 100 MHz)
Shielded
(55 dB up to 100 MHz)
Shielded
(35 dB up to 1GHz)
> 1000 cycles > 1000 cycles > 1000 cycles > 2500 cycles
up to 30 A up to 15 A up to 30 A up to 30 A
- 40°C ; + 125°C
(- 58°F ; + 257°F)
- 40°C ; + 125°C
(- 58°F ; + 257°F)
- 40°C ; +125°C
(- 40°F ; + 257°F)
- 40°C ; +125°C
(- 40°F ; + 257°F)
IP 40 IP 68 when mated IP 67 IP 68 mated and unmated
Shell material
Insulator material
Shielding
Endurance
Current rating
Temperature
range
Protection index
Solder, Crimp or
PCB contacts Solder,
crimp or PCB contacts
JBX series JKX series Sealed JBX size 2
UL approved
Solder,
or PCB contacts
Keyed
2 to 19 contacts
Sealed JDX
Push Pull Connectors
203
S D SCM05G1FD
JBX M
Basic series
Shell type FD-FC-ER-EA-SR-PC-ED-EP-EZ
Shell size 00 - 0 - 1 - 2 - 3
Keying G - J - A - B
Contact layout 02 ---------- 30
Contact type M: pin F: socket (in relation with keying)
Contact termination C: crimp ; S: solder ; P* : straight PCB tails ; Q* : 90° PCB tails
Material & surface plating S: Outer shell in brass alloy with chrome over nickel
N: Outer shell in brass alloy with black plating (consult Souriau USA)
D: Obligatory suffix
S: All content dismeters except .05 mm
P: 0.5 mm contact only
Options M: Connector with backnut for protective boot - Protective boot to order separately page 13
R : Red dot (possible for FD, FC, PC, SR, ER, ED, EZ only)
* For receptacles with female contacts only.
• Mechanically keyed : ensures correct polarisa-
tion and alignment.
• Contact layouts from 2 to 30 contacts.
• Wire gauges range from 30 AWG to 12 AWG.
• High contact density in a small space.
• Contact termination in either crimp, solder, PCB
or right angle PCB contacts.
Key features
Part number system
User advantages
Blister packaging
6-collet cluster
Allows a wide range of cable diameter
applications for a single connector.
Removable contacts
Available crimp versions allow easier
wiring and maintenance.
Push Pull Connectors
204
EP : fixed receptacle, back panel mounting, fixed rear
panel flange (appropriate with 90° contacts for PCB)
ED : fixed receptacle, protuding shell, fixed front flange
ER : fixed receptacle, front panel mounting, fixed
front flange
EA : fixed receptacle, back or front panel mounting,
double nuts fixing (appropriate with
90° contacts for PCB)
SR : fixed receptacle with cable clamping,
front panel mounting, fixed front flange
PC : cable mounted receptacle
EZ : straight receptacle for PCB
FD : straight plug with cable clamping
FC : 90° elbow plug with cable clamping
Shell types
Push Pull Connectors
205
Dimensions
FD : Straight plug
Size
A
B
Ø
C
00
31
23
7
0
39
29
10
1
45
34
12
2
52
40
15
3
62
47
18
FC : 90° elbow plug
Size
A
B
C
ØD
0
30.5
20.5
29.5
10
1
36.5
25.5
33.5
12
2
42.5
30.5
36.5
15
3
50.5
35.5
45
18
ER : Fixed receptacle,
front panel mounting
Size
A
B
C
ØD
00
14
6
0.8
8
0
19
8
1.2
10
1
21
10
1.5
14
2
24
10
1.8
18
3
28
12
2.0
22
EA : Double nut receptacle
Size
A
B
C
ØD
0
19
6.7
2.5
12
1
21
8.3
3.2
16
2
24
8
3.8
20
3
28
9.5
4.5
24
SR : Cable clamp receptacle
Size
A
B
C
ØD
0
38
8
1.2
10
1
43
10
1.5
14
2
50
10
1.8
18
3
59
12
2
22
PC : Cable mounted receptacle
Size
A
ØB
0
38
10
1
43
13
2
50
16
3
59
19.5
EP : Fixed receptacle,
back panel mounting
Size
A
B
C
Ø
D
0
19
4.5
2.5
12
1
21
6
3.2
16
2
24
6.5
3.8
20
ED : Protruding receptacle
Size
A
B
C
Ø
D
0
19
3
1.2
10
1
21
4.5
1.5
14
2
24
6.3
1.8
18
EZ : Receptacle for PCB
Size
Ø
A
B
C
D
Ø
E
0
10
19
4
7.62
1.1
1
12
21
4
7.62
1.1
206
Push Pull Connectors
Dimensions
Range of cable diameters
• Special custom shells
FN : Straight plug,
shell size 0 with a lanyard
FM : 90° elbow plug,
shell size 0 with a lanyard
FF : Straight plug,
with no latching shell size 1
With the plastic collet set supplied with the standard product, a wide range of cable diameters is allowed. Find below the max-
imum and the minimum for each size of shell (for information only because it can change with the cable characteristics).
Size 00 0123
Ø A min 1.1 1.5 2.0 3.5 4.9
Ø A Max 3.5 5.5 7.5 9.7 12.0
Push Pull Connectors
207
JB
Key G A
sizes 0 - 1 sizes 2 - 3 sizes 0 - 1
Keying angle 0° 45° 37.5° 30° 60°
Plug
Receptacle
JBX Series are mechanically keyed to ensure correct alignment of the inserts before the contacts mate.
«G» : normal inserts ; 0° keying angle, plugs with pin contacts, receptacles with socket contacts
«J» : reversed gender inserts ; twin narrow keys, plugs with socket contacts, receptacles with pin contacts.
Keying
• Keying angles
• Keyed shells availability
Shell size Key ER EA ED EP EZ SR PC FD FC
00 Gl l
Gl l l l l l l l l
Jll ll
0Al l
Bl l
Gl llll llll
1Jllll
Al l
Gllllllll
2Jll ll
All
3Gll llll
l Available for JBX Series, Customs can be ordered, contact Product Management.
Push Pull Connectors
208
Contact layouts
• Multi contact inserts
Male AWG Max. Testing Working
Shell insulator Contact S C P* Q* Ø Solder Crimp current voltage voltage
size viewed from layout solder crimp straight 90° Contact wire wire rating (Vdc /
wiring side PCB tails PCB tails Max. Max. (A) (Vrms) Vrms)
04 S 0.5 30 - 2 1000 500/350
02 S C P Q 0.9 24 20 10 1400 660/460
03 S C P Q 0.9 24 20 8 1300 600/420
04 S C P Q 0.7 26 22 7 1400 660/460
05 S C P Q 0.7 26 22 6.5 800 400/260
06 S P 0.5 28 -2.5 680 320/220
07 S P 0.5 28 - 2.5 680 320/220
02 S C 1.3 20 18 15 1600 760/530
03 SC1.3 20 18 12 1300 600/420
04 S C P Q 0.9 24 20 10 1900 900/630
05 SCPQ 0.9 24 20 9 1400 660/460
06 S C P Q 0.7 26 22 7 1400 660/460
07 S C P Q 0.7 26 22 7 1400 660/460
08 SCPQ0.7 26 22 5 1200 600/420
10 S0.5 28 - 2.5 600 300/200
Inserts with fixed non removable contacts
* For receptacles with female contacts only.
Note : Contacts are numbered counter clock wise in the plug and clock wise in the receptacle.
Contact types available
00
0
1
Push Pull Connectors
209
Contact layouts
• Multi contact inserts
Male AWG Max. Testing Working
Shell insulator Contact S C P* Q* Ø Solder Crimp current voltage voltage
size viewed from layout solder crimp straight 90° Contact wire wire rating (Vdc /
wiring side PCB tails PCB tails Max. Max. (A) (Vrms) Vrms)
02 S C 2 16 12 30 2100 1000/700
03 S C 1.6 18 14 17 1700 830/560
04 S C 1.3 20 18 15 2400 1000/800
05 S C 1.3 20 18 14 1900 900/630
06 S C 1.3 20 18 12 1900 900/630
07 S C 1.3 20 18 11 1500 730/500
08 S C P Q 0.9 24 20 10 1700 830/560
10 S C P Q 0.9 24 20 8 1700 830/560
12 S C P Q 0.7 26 22 7 1700 830/560
16 S C P Q 0.7 26 22 6 1500 730/500
18 S C P 0.7 26 22 5.5 1400 660/460
19 S C P 0.7 26 22 5 1400 660/460
03 SC216 12 25 3600 1600/1200
04 S C 2 16 12 25 2500 1100/830
Inserts with fixed non removable contacts
* For receptacles with female contacts.
Note : Contacts are numbered counter clock wise in the plug and clock wise in the receptacle.
Contact types available
2
3
Push Pull Connectors
210
• Voltage Test Procedure
- The testing voltage corresponds to the maximum voltage the connector is able to withstand in normal climatic conditions.
The value is about 75% of the electrical breakdown voltage. The testing voltage level can be reached several times in connec-
tors life, but never applied for a continuous duration.
- The working voltage corresponds to the maximum voltage the connector is able to withstand continuously during its life
time, in real environmental conditions, even with high temperature. The value is around 1/3 of the testing voltage.
• Maximum current rating
- This indicated maximum current rating corresponds to the maximum current that can be applied simultaneously on each
line of the connector mated pair, continuously during its life time, in normal climatic conditions.
Remark : If the current is applied on only one contact of the layout, then an increased current value can be achieved over a long
duration.
Inserts with fixed non removable contacts
* For receptacles with female contacts.
Note : Contacts are numbered counter clock wise in the plug and clock wise in the receptacle.
Contact layouts
• Multi contact inserts
Male AWG Max. Testing Working
Shell insulator Contact SC P* Q* Ø Solder Crimp current voltage voltage
size viewed from layout solder crimp straight 90° Contact wire wire rating (Vdc /
wiring side side PCB tails PCB tails Max. Max. (A) (Vrms) Vrms)
07 S C 1.6 16 12 15 2200 1000/730
10 S C 1.3 20 18 12 1400 660/460
14 S C P 0.9 24 20 9 1700 830/560
18 S C P 0.9 24 20 7 1400 660/460
22 S C P 0.7 26 22 5.5 1200 560/400
30 S C P 0.7 26 26 3.5 800 400/260
Contact types available
3
Push Pull Connectors
211
Options
• Protective boot
• Caps : an efficient protection against dust
With each JBX connector, one protective boot can accept diverse cable diameters thus the end-user can manage various
cable diameters without bothering with multiple part numbers.
Material :
ELASTOLLAN (PUR)
Working temperature :
- 40°C ; + 80°C
- 40°F ; + 176°F
Dimensions
Part Shell
number size ØAL ØCâble
min Max.
JBX 00 MPN 00 1.5 15 1 3.5
JBX 0 MP* 0 2.2 20 1.5 5.5
JBX 1 MP* 1 2.6 25 2 7.5
JBX 2 MP* 2 4 30 3.5 9.7
JBX 3 MP* 3535 4.9 12
Color code Colors
Ablue
Bwhite
G grey
Jyellow
Mbrown
N black
R red
V green
O orange
* Color code / In size 00, available only in black
Part number Ø
JBX BR0 12
JBX BR1 14
JBX BR2 18
JBX BR3 20
Parts that require a protective boot
need to be ordered with an M suffix,
see page 5. Protective boots are
ordered separately.
Push Pull Connectors
212
• Mechanical and climatics
Component Material Standard Surface treatment (µm)
ISO ASTM Cr Ni Au
Outer shell and collet nut Brass CuZn40Pb3 C38500/C360 0.1 - 0.6 5 - 8 -
Latching sleeve Brass CuZn40Pb3 C38500/C360 - 5 - 8 -
Shielding ring Brass CuZn40Pb3 C38500/C360 - 3 - 7 -
Nut Brass CuZn40Pb3 C38500/C360 5 - 8 -
Half bushes Brass CuZn40Pb3 C38500/C360 - 5 - 8 -
Socket contact (1) Cupro-nickel CuNi1Pb1P CDAC19150 - 3 - 5 0.5
Pin contact (1) Brass CuZn35Pb2 C35300/C360 - 3 - 5 0.5
Clip Beryllium copper CuBe1,9 C17200/C360 - - -
Component Material Color Working Temperature
InsertPEEK + 15%GF brown - 50°C + 250°C - 58°F + 482°F
Collet PA 6/6 + MoS2 black - 55°C + 125°C - 67°F + 257°F
Characteristics Values Standard Method
Endurance > 1000 cycles (except for 0.7 mm crimp contacts for which MIL-STD 2016.1
endurance is limited to 500 cycles) 1344A
Shock 50 g, duration 6 ms ; contact Ø 0.7 mm and 0.9 mm MIL-STD 2004.1
100 g, duration 6 ms ; contact Ø 1.3 mm - 1.6 mm and 2 mm 1344A
Vibrations 10 to 2000 Hz γ= 15 g, contact Ø 0.7 mm and 0.9 mm MIL-STD 2005.1
γ= 20 g, contact Ø1.3 mm - 1.6 mm and 2 mm 1344A
Protection index IP 40 CEI 529
- 55°C + 125°C
with plastic collets - 67°F + 257°F --
Operating temperature
with optional metal collets - 55°C + 200°C
- 67°F + 392°F - -
(only on request, consult SOURIAU)
(1) Gold thickness as per MIL-G-45204C type 1, class 00.
}
}
Technical characteristics
• Material and treatment UL approved - homologation file E118235 -
Push Pull Connectors
213
Wiring and assembly instructions
• Panel cutout
Size
Ø A
B
00
7.1
6.4
0
9.1
8.3
1
12.1
10.6
2
15.1
13.6
3
18.1
16.6
• Removable contacts
Reliable design
Crimp contacts
Solder contacts
• Conical entry with chamfered edge on the socket contact and smooth slope on the pin con-
tact ensure perfect concentric mating even when handled carelessly.
• The pressure spring of the socket contact maintains a constant force on the pin contact
when mated.
Contact Usable cables Max. Contact Endurance
Core section (mm2)current resistance (number
ØCØF AWG rating (A) (m?) of cycles)
min Max.
0.7 0.85 0.129 0.326 22-24-26 7 5 500 Max.
0.9 1.1 0.205 0.518 20-22-24 10 3.5 > 1000
1.3 1.4 0.326 0.823 18-20-22 15 3 > 1000
1.6 1.9 0.823 2.081 14-16-18 17 2.5 > 1000
2.0 2.4 1.309 3.309 12-14-16 30 2.5 > 1000
Contact Usable cables Max. Contact Endurance
Core section (mm2)current resistance (number
ØCØF AWG rating (A) (m?) of cycles)
min Max.
0.9 0.8
-
0.21 24 10 3.5 > 1000
0.7 0.7
-
0.30 26 7 5 500 max
1.3 1.1
-
0.60 20 15 3 > 1000
1.6 1.5
-
0.93 18 17 2.5 > 1000
21.9
-
1.34 16 30 2.5 > 1000
The conductor bucket on the solder contacts is designed with an angle to form a cup into which the solder can flow easily.
• Fixed contacts
Solder contacts
Contact Usable cables Max. Contact Endurance
Shell
Core section
current resistance (number
Ø
C
Ø
Fsize
(mm2) Max.
AWG rating (A) (m?) of cycles)
0.5 0.4 00 0.06 30 510 > 1000
0.5 0 - 1 0.096 28
0.7 0.63 0 - 1 - 2 - 3 0.15 26 7 5 > 1000
Contacts for PCB
Contacts for PCB Contact length dimensions “L”
PCB tail length size 0 dimension “L” 5.5 mm
0.7 mm female PCB tail length size 0 dimension “L” 3.5 mm
0.7 mm female PCB tail length size 1 dimension “L” 4.0 mm
0.7 mm female PCB tail length size 2 dimension “L” 6.0 mm
0.7 mm female PCB tail length size 3 dimension “L” 6.0 mm
0.9 mm female PCB tail length size 0 dimension “L” 3.5 mm
0.9 mm female PCB tail length size 1 dimension “L” 4.0 mm
0.9 mm female PCB tail length size 2 dimension “L” 6.0 mm
4.3 mm female PCB tail length size 1 dimension “L” 4.0 mm, dimension “F” 0.7 mm
4.3 mm female PCB tail length size 2 dimension “L” 6.0 mm, dimension “F” 0.7 mm
4.3 mm female PCB tail length size 3 dimension “L” 6.0 mm, dimension “F” 0.7 mm
Push Pull Connectors
214
Wiring and assembly instructions
• Cable stripping for connectors with crimp contacts
• Cable stripping for connectors with solder contacts
Stripping for FD, SR, PC Stripping for FC
LCTLCT
Shell size Ø contacts Ø I
0
1
2
3
Stripping for FD, SR, PC
LSTLST
0
.
5924 / / /
0
.
511 2716 27
0
.
7123 7163 7
0
.
9123 7163 7
0
.
5122 8192 8
0
.
7133 8193 8
0
.
9133 8193 8
1
.
3 13 3.5 8 19 3.5 8
0
.
716 392539
0
.
9163 9253 9
1
.
316 3.5 9 25 3.5 9
1
.
6184 9254 9
2184 9254 9
0
.
7 20 3 10 30 3 10
0
.
9 20 3 10 30 3 10
1
.
3 20 3.5 10 30 3.5 10
1
.
6 22 4 10 30 4 10
2 22 4 10 30 4 10
Stripping for FC
00
0
1
2
3
4
5.5
4
5.5
0.7 15 7 19 7
? 1.35
> 1.35
4
5.5
4
5.5
0.9 15 7 19 7
? 1.6
> 1.6
4
5.5
4
5.5
0.7 16 8 22 8
? 1.35
> 1.35
4
5.5
4
5.5
0.9 16 8 22 8
? 1.6
> 1.6
4
5.5
4
5.5
1.3 16 8 22 8
? 2.1
> 2.1
4
5.5
4
5.5
0.7 19 9 28 9
? 1.35
> 1.35
4
5.5
4
5.5
0.9 19 9 28 9
? 1.6
> 1.6
4
5.5
4
5.5
1.3 19 9 28 9
? 2.1
> 2.1
5.5
7
5.5
7
1.6 21 9 28 9
? 2.6
> 2.6
5.5
7
5.5
7
2.0 21 928 9
? 3.2
> 3.2
4
7
4
7
0.7 25 10 35 10
? 1.35
> 1.35
4
7
4
7
0.9 25 10 35 10
? 1.6
> 1.6
4
7
4
7
1.3 25 10 35 10
? 2.1
> 2.1
5.5
8.5
5.5
8.5
1.6 27 10 35 10
? 2.6
> 2.6
5.5
8.5
5.5
8.5
2.0 27 10 35 10
? 3.2
> 3.2
ØI : diameter over insulation
Shell size Ø Contacts
Push Pull Connectors
215
• Cable stripping : see page 16
• Connector preparation
1 - Select the proper collet À. (see page 19)
2 - Slide the protective boot Âthe backnut
Áand the collet Àonto the cable.
3 - In case of a screened cable, combs out
the screen and fold back over the
collet À.
• Contacts wiring : crimp contacts
• Contacts wiring : solder contacts
1 - Select the proper crimping tool (see page
48) and locator according to the connec-
tors involved.
2 - Adjust the tool selector for the corre-
sponding conductor AWG.
3 - Crimp the contacts ?and then engage
them into the insert cavities Ätill clip
tightening.
• Connector assembly
Fixed solder contacts 0.5 mm and 0.7 mm Removable solder contacts from 0.9 mm to 2 mm
1 - Terminate the bucket contacts 1 - Solder the conductors to the contact buckets then
using solder method engage them into the insert cavities Ä till clip holding
Flats B
Window Flats A
Wiring and assembly
instructions :
STRAIGHT PLUG
1 - Position 2 half bushes ?on the insert Ä
making sure that the insert key appears
through window of one bush.
2 - Position the collet and the half bushes
while maintaining the screen. Bush keys
are seated in the collet keying slots.
3 - Position all the sub-assembly in the con-
nector housing ?making sure to keep
sub-assembly aligned.
4 - Install the backnut Áand screw it. Use
the two wrenches well positionned on
the flats A and B. Place a wrench to grip
flats B, use the other wrench to tighten
the backnut at the flats A following the
torque values on page 19.
5 - Install the protective boot Âif exists.
Push Pull Connectors
216
Wiring and assembly
instructions :
90° ELBOW PLUG
• Cable stripping : see page 16
• Connector preparation
1 - Select the proper collet Á (see page 19).
2 -
Slide the protective boot ?, the backnut Â,
the collet Áand the elbow outlet À
onto the cable.
3 - In case of a screened cable, comb out the
screen and fold back over the collet Á.
4 - Position in the elbow outlet making sure
the anti-rotating keys are well aligned.
5 - Tighten the backnut Âtill bottomed.
6 - Install the protective boot ?if exists.
• Contacts wiring : crimp contacts
• Contacts wiring : solder contacts
1 - Select the proper crimping tool (see
page 49) and positionner according to
connectors involved.
2 - Adjust the tool selector for the corre-
sponding conductor AWG.
3 - Crimp the contacts ?then engage them
into the insert cavities Ätill clip tightening.
• Connector assembly
1 - Position the ring ?on the insert Äthen
engage all in the spacer Ç.
2 - Position all the sub-assembly in the con-
nector housing Èwith milled flats A of
the elbow outlet facing to the rear of the
plug housing.
3 - Tighten the screw Éat the torque values
defined on page 19.
Fixed solder contacts 0.5 mm and 0.7 mm Removable solder contacts from 0.9 mm to 2 mm
1 - Terminate the bucket contacts 1 - Solder the conductors to the contact buckets then
using solder method engage them into the insert cavities Ätill clip holding
Braid
Ä
Milled flats A
Push Pull Connectors
217
Torque values are the maximum allowable for each connector size.
Torque values will vary due to the type and size of the cable used.
*Apply thread lock to back nut prior to assembly.
Note : All the tooling numbers refer to the drawings page 205
• Shielding
Tested according to MIL-STD 1344 A, method 3007
Shell size Electrical continuity
(mΩ)
00 4.5
04
13
22.5
32.5
G
mV
A
4 or 6 collets per shell size allow a wide range of cable diameters for a single connector ; outer cable diameters are for refer-
ence only, since values will change with specific manufacturers cable properties.
Cable diameter
Shell size 0 Shell size 1 Shell size 2 Shell size 3
11.1 - 1.9 1.5 - 2.5 2.0 - 2.5 3.5 - 4.7 4.9 - 6
2 2 - 2.8 2.6 - 3.5 2.6 - 3.5 4.8 - 5.7 6.1 - 7.2
3 2.9 - 3.5 3.6 - 4.5 3.6 - 4.5 5.8 - 6.7 7.3 - 8.4
4 - 4.6 - 5.5 4.6 - 5.5 6.8 - 7.7 8.5 - 9.6
5 - - 5.6 - 6.6 7.8 - 8.7 9.7 - 10.8
6 - - 6.7 - 7.5 8.8 - 9.7 10.9 - 12.0
Collet
number Shell size 00
1
2
3
5
6
4
Wiring and assembly instructions
• Collets selection according to cable diameters
• Coupling torques
Tools
7 x 0.5 9 x 0.6 12 x 1 15 x 1 18 x 1 Advised torques* in Nm
(jaw dimensions)
Size 00 0 1 2 3 00 0 1 2 3
711 14 17 21 0.5 0.7 1.3 1.7 2
6 8 10 13 15 0.7 0.8 1 1.5 2
6 9 11 14 16 0.7 0.8 1 1.5 2
-
10 12 15 17 - 0.4 to 0.5 0.5 to 0.7
-
10 13 17 20 0.5 0.7 1.3 1.7 2
-
913 15
------
Metal collet available for
all sizes
Discreet application based
on cable diameter
JBX Plug Assembly Instructions
218
1. Determine what size cable you will be
using. Then select the proper collet num-
ber for that cable.
• Collets selection according to cable diameter
3 or 5 collets per shell size allow a wide range of cable diameters for a single connector. Cable out diameters are for informa-
tion only, since values will change with each cable construction.
Collet number 4 in shell size 0 and collet number 6 in shell size 1 are not used
2. Strip the cable and each wire to the required strip length.
• Cable stripping for connectors with crimp contacts
Collet
Number
Cable Diameter
Shell Size 0 Size 0, Option G Shell Size 1 Size 1, Option G
11.5 - 2.5 — 2 - 2.5 —
2 2.6 - 3.5 — 2.6 - 3.5 —
3 3.6 - 4.5 — 3.6 - 4.5 6.1 - 6.7
4—4.6 - 5.5 4.6 - 5.5 6.8 - 7.7
5 — 5.6 - 6 5.6 - 6 7.8 - 8
Shell Size ø Contacts ø I Stripping for FD, SR, PC Stripping for FC
L C T L C
T
00.7 ≤1.35 15 47 19 47
>1.35 5.5 5.5
0.9 ≤1.6 15 47 19 47
>1.6 5.5 5.5
1
0.7 ≤1.35 16 48 22 48
>1.35 5.5 5.5
0.9 ≤1.6 16 48 22 48
>1.6 5.5 5.5
1.3 ≤2.1 16 48 22 48
>2.1 5.5 5.5
2
0.7 ≤1.35 19 49 28 49
>1.35 5.5 5.5
0.9 ≤1.6 19 49 28 49
>1.6 5.5 5.5
1.3 ≤2.1 19 49 28 49
>2.1 5.5 5.5
1.6 ≤2.6 21 5.5 9 28 5.5 9
>2.6 7 7
2.0 ≤3.2 21 5.5 9 28 5.5 9
>3.2 7 7
3
0.7 ≤1.35 25 410 35 410
>1.35 7 7
0.9 ≤1.6 25 410 35 410
>1.6 7 7
1.3 ≤2.1 25 410 35 410
>2.1 7 7
1.6 ≤2.6 27 5.5 10 35 5.5 10
>2.6 8.5 8.5
2.0 ≤3.2 27 5.5 10 35 5.5 10
>3.2 8.5 8.5
JBX Plug Assembly Instructions
219
• Cable stripping for connectors with solder contacts
3. When assembling a plug with a protective boot (#3), prep the cable by taking the protective boot and sliding it with the small
inside diameter first onto the cable. Then slide the end of the back nut (#2) that has the smaller diameter onto the cable.
Next, take the collet (#1) and slide the end with the gripping teeth first onto the cable until the opposite end of the collet is
flush with the cut end of the jacket. If the cable has shielding, fold back the braid so that it is covering the outside diameter
of the collet. Do not place braid into any area of the alignment slots. Then insure that the braid does not interfere with the
alignment slots of the collet.
4. Attach removable contacts to wires:
a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires using the proper crimping tool set on
the correct AWG wire.
(see FIGURE 4.A).
After the contact has been crimped to the wire, check each contact to insure
that the contact is securely crimped to the wire.
Shell Size ø Contacts Stripping for FD, SR, PC Stripping for FC
L S T L S T
00 0.5 9 2 4 / / /
0
0.5
11
2 7 16 2 7
0.7 12 3 7 16 3 7
0.9 12 3 7 16 3 7
1
0.5 12 2 8 19 2 8
0.7 13 3 8 19 3 8
0.9 13 3 8 19 3 8
1.3 13 3.5 8 19 3.5 8
2
0.7 16 3 9 25 3 9
0.9 16 3 9 25 3 9
1.3 16 3.5 9 25 3.5 9
1.6 18 4 9 25 4 9
2.0 18 4 9 25 4 9
3
0.7 20 3 10 30 3 10
0.9 20 3 10 30 3 10
1.3 20 3.5 10 30 3.5 10
1.6 22 4 10 30 4 10
2.0 22 4 10 30 4 10
JBX Plug Assembly Instructions
220
Locator for pin and socket 0.7 - 0.9 mm and 1.3 mm contacts
FIGURE 4.A
Turret with locator for pin and socket 1.6 mm and 2 mm contacts
Crimping Tool
b. If using soldered contacts, prep each wire with flux and then tin dip each exposed wire end. Next pre-load a piece of heat
shrink onto the wire (Individual heat shrink tubes are optional). Solder each wire to the solder cup end of the contact. To
avoid shorts, make sure that no solder comes in contact with any other contact or wire on the connector. After the contact
has been soldered to the wire, check each contact to insure that the contact is securely soldered to the wire. Slide the
pre-loaded heat shrink over the solder joint and shrink into place. Do not over-heat the solder joint area as it can cause the
solder to re-flow or it could burn the wire insulation.
Shell
Size
ø
Contacts AWG Male Contact Female Contact
Souriau P/N Daniels P/N Astro P/N Souriau P/N Daniels P/N Astro P/N
00.7 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LP07 86 - 224 /
0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LP09 86 - 226 /
1
0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LP07 86 - 197 642 - 004
0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LP09 86 - 199 642 - 005
1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LP13 86 - 201 642 - 006
2
0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LP07 86 - 203 642 - 010
0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LP09 86 - 205 642 - 011
1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LP13 86 - 207 642 - 012
3
0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LP07 86 - 214 642 - 017
0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LP09 86 - 215 642 - 018
1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LP13 86 - 216 642 - 019
Shell Size ø Contacts AWG Male and Female Contacts
Souriau P/N Daniels P/N Astro P/N
21.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030
2 12 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031
31.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038
2 12 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035
Specifications MIL-C-22520 / 7.01
Contacts 0.7 mm - 0.9 mm
and 1.3 mm
MIL P/N - Souriau P/N Supplier P/N
MIL-22520/7-01 Daniels: MH860
Specifications MIL-C-22520 / 1.01
Contacts 1.6 mm and 2 mm
MIL P/N - Souriau P/N Supplier P/N
MIL-22520/1-01 Daniels: AF8
Buchanan: 615708
JBX Plug Assembly Instructions
221
5. If inserting removable contacts:
a. Starting with the interface end of the contact, carefully insert each contact into the backside of the insulator that has the
position loading path indicator (worm) on it. Start with the end of the position loading path indicator (worm) that has the
half circle on it (Position #1). Then follow the position loading path indicator (worm) around the insulator. You will go
counter clockwise if using a male contact and clockwise if using a female contact (see diagram below for the position
loading path indicator (worm) layout). If the connector has center contacts, it is sometimes easier to start at the end of the
position loading path indicator (worm) (last position) and work backwards. This is up to the assembler and the process
they are using to insert the contacts. Make sure not to bend the contact when inserting it into the insulator. It is extremely
important that the contact is completely seated in to the insulator. For the connector to function properly, the contact
should click/snap into place when seated. To confirm the seating of the contact, check each contact for proper seating.
6. Removal of contacts:
a. Using the proper extraction tool insert the tool over the front of the contact and push contact out. Failure to use the proper
extraction tool can result in damage to the contact.
TOOLINGS – JBX – JKX
Manual Extraction Tools
Contacts automatically extracted without pulling on the cable.
The extraction tool is the same for both male and female contacts.
7. Take the keyed half bushing (#6) and place it over the insulator so that the window is lined up with the key on the insulator
and the key on the half bushing is pointing to the back of the insulator (position loading path indicator (worm end)). Then take
the half bushing without the window (#6) and place on the opposite side of the insulator so that both half bushings are
aligned with each other.
Shell Size ø Contacts Souriau Part Number Astro Part Number
00.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
2
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
1.6 JBX OUT DC 16 ATJP 2095
2.0 JBX OUT DC 20 ATJP 2115
3
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
1.6 JBX OUT DC 16 ATJP 2095
2.0 JBX OUT DC 20 ATJP 2115
JBX Plug Assembly Instructions
222
8. Take the collet that is pre-loaded on the cable and align the slots in the collet with the keys on the end of the half bushings
(you may need to move the braid away from the slots and spin the collet slightly). Once they are aligned, compress the
assembly so that it is in line and there are no gaps between the collet & the half bushings. The braid should still be in place
once the assembly is inserted.
9. Take a connector housing (#7) and slide it over the insulator so that the red dot on the connector housing lines up with the
key on the half bushing with window. Push the whole assembly into the connector housing until it bottoms out. Insure that
the keys are seated properly by turning the collet that is already aligned with the half bushings. If the collet does not turn,
then the keys are correctly aligned. If the collet does turn, then you must withdraw the assembly & realign the keys.
10. Once the assembly is installed into the connector housing and is aligned properly, apply thread lock to thread area. Then
slide the back nut up until you can manually start the back nut threads onto the threaded end of the connector housing.
Tighten the back nut up as far as you can by hand, then take the appropriate wrenches and place the wrenches onto the
flats located on the connector housing. Do not over torque back nut as it can cause connector failure.
11. If the connector requires a protective boot, slide the boot over the lip on the back nut.
12. Potting of backend of plug with clipped contacts:
Clipped contacts are designed to float in the connector so that they self align when mated. It is sometimes necessary to
pot the back end of the connector so that the contacts are sealed off from the environment. When this application is need-
ed, it is recommended that the assembler engage a mating connector/alignment tool to the assembly being potted. Once
the mating connector/alignment tool is engaged, it must be left engaged until the potting compound has hardened. This
will insure that the true position requirements are met. If the application is for low volume, a mating connector can be
used. If the application is for high volume, it is recommended that an alignment tool be purchased from the supplier.
T
Tr
ro
ou
ub
bl
le
e S
Sh
ho
oo
ot
ti
in
ng
g
Problem: Cause: Correction:
Contact will not seat in connector, contact back-
ing out.
Wrong wire or insulation size, wrong strip length,
poor crimping, broken clips, damaged insulator,
removed contact without proper removal tool,
bad crimp.
Usecorrect wire, adjust strip length, strip and re-
crimp with new contact, replace insulator, using
wrong crimp tool, replace contact.
Bentsolder contact Bentin handling, bent in soldering operation,
connector assembled incorrectly.
Replace insert with contacts.
Pins and insulator were inserted into electrical
test while unprotected by shell
Connector will not release from mating part or
operate correctly
Not using flats on latching sleeve and back nut
to torque connector, improper assembly of the
connector, over mold material inside connector.
Release back nut and re-torque, disassemble
and reassemble, replace connector.
Over tightened the back nut. Connector will not release from mating part or
operate correctly, damage connector.
Loosen back nut and retighten.
Collet will not grip cable. Loose cable in connector. Check correct collet size is being used.
Connector will not assemble. Incorrect alignment of key in connector, half
bushings, connector housing, insulator, collet,
braid in key slots in collet.
Disassemble connector and reassemble connec-
tor-aligning keys, relocate braid in collet.
Contact stubbing after mating. Bent contact and damaged contact, connector-
assembled incorrectly.
Re-align contact, replace insert with contacts.
Electrical failure. Improper crimping, wrong wire strip length, wire
loading incorrect location, poor solder joint.
Remove contact with correct removal tool, rein-
stallnew contact, and verify strip length.
JBX Receptacle Assembly Instructions
223
1. Select the proper JBX receptacle and contact size for the specific cable application by using the contact layout chart as
depicted in the Push Pull catalog.
2. Strip the cable/wire to the required strip length.
Wiring and assembly instructions
Cable stripping for connectors with crimp contacts
Shell Size ø Contacts ø I Stripping for FD, SR, PC Stripping for FC
L C T L C
T
00.7 ≤1.35 15 47 19 47
>1.35 5.5 5.5
0.9 ≤1.6 15 47 19 47
>1.6 5.5 5.5
1
0.7 ≤1.35 16 48 22 48
>1.35 5.5 5.5
0.9 ≤1.6 16 48 22 48
>1.6 5.5 5.5
1.3 ≤2.1 16 48 22 48
>2.1 5.5 5.5
2
0.7 ≤1.35 19 49 28 49
>1.35 5.5 5.5
0.9 ≤1.6 19 49 28 49
>1.6 5.5 5.5
1.3 ≤2.1 19 49 28 49
>2.1 5.5 5.5
1.6 ≤2.6 21 5.5 9 28 5.5 9
>2.6 7 7
2.0 ≤3.2 21 5.5 9 28 5.5 9
>3.2 7 7
3
0.7 ≤1.35 25 410 35 410
>1.35 7 7
0.9 ≤1.6 25 410 35 410
>1.6 7 7
1.3 ≤2.1 25 410 35 410
>2.1 7 7
1.6 ≤2.6 27 5.5 10 35 5.5 10
>2.6 8.5 8.5
2.0 ≤3.2 27 5.5 10 35 5.5 10
>3.2 8.5 8.5
JBX Receptacle Assembly Instructions
224
Wiring and assembly instructions
Cable stripping for connectors with solder contacts
3. Depending on application and shell type, the nut and washer may be removed before attaching the wires to the contacts.
4. Attach crimped contacts to wires:
a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires using the proper crimping tool and loca-
tor set on the correct AWG wire size
(see FIGURE 4.A).
After the contact has been crimped to the wire, check each con-
tact to insure that the contact is securely crimped.
Locator for pin and socket 0.7 - 0.9 mm and 1.3 mm contacts
FIGURE 4.A
Shell Size ø Contacts Stripping for FD, SR, PC Stripping for FC
L S T L S T
00 0.5 9 2 4 / / /
0
0.5
11
2 7 16 2 7
0.7 12 3 7 16 3 7
0.9 12 3 7 16 3 7
1
0.5 12 2 8 19 2 8
0.7 13 3 8 19 3 8
0.9 13 3 8 19 3 8
1.3 13 3.5 8 19 3.5 8
2
0.7 16 3 9 25 3 9
0.9 16 3 9 25 3 9
1.3 16 3.5 9 25 3.5 9
1.6 18 4 9 25 4 9
2.0 18 4 9 25 4 9
3
0.7 20 3 10 30 3 10
0.9 20 3 10 30 3 10
1.3 20 3.5 10 30 3.5 10
1.6 22 4 10 30 4 10
2.0 22 4 10 30 4 10
Shell
Size
ø
Contacts AWG Male Contact Female Contact
Souriau P/N Daniels P/N Astro P/N Souriau P/N Daniels P/N Astro P/N
00.7 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LP07 86 - 224 /
0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LP09 86 - 226 /
1
0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LP07 86 - 197 642 - 004
0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LP09 86 - 199 642 - 005
1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LP13 86 - 201 642 - 006
2
0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LP07 86 - 203 642 - 010
0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LP09 86 - 205 642 - 011
1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LP13 86 - 207 642 - 012
3
0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LP07 86 - 214 642 - 017
0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LP09 86 - 215 642 - 018
1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LP13 86 - 216 642 - 019
JBX Receptacle Assembly Instructions
225
Turret with locator for pin and socket 1.6 mm and 2 mm contacts
Crimping Tool
b. If using clipped solder contacts, prep each wire with flux and then tin dip each exposed wire end. Next pre-load a piece of
heat shrink onto the wire (Individual heat shrink tubes are optional). Solder each wire to the solder cup end of the contact.
To avoid shorts, make sure that no solder comes in contact with any other contact or wire on the connector. After the con-
tact has been soldered to the wire, check each contact to insure that the contact is securely soldered to the wire. Slide the
pre-loaded heat shrink over the solder joint and shrink into place. Do not over-heat the solder joint area as it can cause the
solder to re-flow or it could burn the wire insulation.
5. If inserting terminated contacts:
a. Starting with the interface end of the contact, insert each contact into the backside of the insulator that has the position
loading path indicator (worm) on it. Start with the end of the position loading path indicator (worm) that has the half circle
on it (Position #1). Then follow the position loading path indicator (worm) around the insulator. You will go counter clock-
wise if using a male contact and clockwise if using a female contact (see diagram below for the position loading path indi-
cator (worm) layout). If the connector has center contacts, it is sometimes easier to start at the end of the position loading
path indicator (worm) (last position) and work backwards. This is up to the assembler and the process used to insert the
contacts. Make sure not to bend the contact when inserting it into the insulator. It is extremely important that the contact
is seated in the insulator for the connector to function properly. The contact should click/snap into place when seated.
Check each contact for proper seating.
Removal of contacts:
Using the proper extraction tool (See FIGURE 6.A), insert the tool over the front of the contact and push contact out. Failure to
use the proper extraction tool can result in damage to the contact.
Shell Size ø Contacts AWG Male and Female Contacts
Souriau P/N Daniels P/N Astro P/N
21.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030
2 12 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031
31.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038
2 12 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035
Specifications MIL-C-22520 / 7.01
Contacts 0.7 mm - 0.9 mm
and 1.3 mm
MIL P/N - Souriau P/N Supplier P/N
MIL-22520/7-01 Daniels: MH860
Specifications MIL-C-22520 / 1.01
Contacts 1.6 mm and 2 mm
MIL P/N - Souriau P/N Supplier P/N
MIL-22520/1-01 Daniels: AF8
Buchanan: 615708
JBX Receptacle Assembly Instructions
226
Manual extraction tools
The extraction tool is the same for both male and female contacts.
FIGURE 6.A
7. Potting of backend of receptacle with clipped contacts
Clipped contacts are designed to float in the connector so that they self align when mated. It is sometimes necessary to pot
the backend of the connector so that the contacts are sealed off from the environment. When this application is needed, it is
recommended that the assembler engage a mating connector/alignment tool to the assembly being potted. Once the mating
connector/alignment tool is engaged, it must be left engaged until the potting compound has hardened. This will insure that
the true position requirements are met. If the application is low volume, a mating connector can be used. If the application is
for high volume, it is recommended that an alignment tool be purchased from the supplier.
T
Tr
ro
ou
ub
bl
le
e s
sh
ho
oo
ot
ti
in
ng
g
Shell Size ø Contacts Souriau Part Number Astro Part Number
00.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
2
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
1.6 JBX OUT DC 16 ATJP 2095
2.0 JBX OUT DC 20 ATJP 2115
3
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
1.6 JBX OUT DC 16 ATJP 2095
2.0 JBX OUT DC 20 ATJP 2115
Problem: Cause: Correction:
Contact will not seat in connector, contact back-
ing out.
Wrong wire or insulation size, wrong strip length,
poor crimping, broken clips, damaged insulator,
removed contact without proper removal tool,
bad crimp.
Use correct wire, adjust strip length, strip and re-
crimp with new contact, replace insulator, using
correct crimp tool, replace contact.
Bent solder contact Bent in handling, bent in soldering operation,
connector assembled incorrectly.
Re-align contact, replace insert with contacts.
Contactstubbing after mating. Bentcontact and damaged contact, connector-
assembled incorrectly.
Re-aligncontact, replace insert with contacts. If
using clipped contacts and receptacle is pot-
ted, a mating connector must be applied to
the connector that is being potted. This
insures that the contacts will be properly
aligned.
Electrical failure. Impropercrimping, wrong wire strip length, wire
loading incorrect location, poor solder joint.
Removecontact with correct removal tool, rein-
stall new contact, and verify strip length.
Environmentally Sealed
Push Pull Connectors
227
• Sealed IP 68 (mated connectors)
• Mechanically keyed : ensures correct
polarization and alignment.
• Contact arrangements : from 2 to 10 con-
tacts.
• Wire gauge range from 28 AWG to 14
AWG.
• High contact density in a small space.
• Contact termination in either crimp, sol-
der, PC or right angle PCB contacts.
Part number system
MS D SC
M05G1
FD
JKX
Basic series
Shell configuration FD - ER - EP - PC
Size 0 - 1
Keying G
Contact layouts 02 ---------- 10 (see page 33)
Contact type M: pin F: socket (in relation with keying)
Contact termination C: crimp ; S: solder ; P* : straight PCB tails ; Q* : 90°PCB tails
Material & surface plating S: Outer shell in brass alloy with glossy chrome over nickel
N: Outer shell in brass alloy with black plating (consult SOURIAU US)
D: Obligatory suffix
S: All contact diamete except 0.5 mm
P: 0.5 mm contacts only
Options M: Connector with backnut for protective boot (protective boot to order separately page 34)
G: Connector with adaptation to accomodate big cables (Ø 4.5 to 6 in size 0 and Ø 6 to 8 in size 1)
R: Red dot (possible for FD, PC, ER only)
* For receptacles with female contacts only.
Key features
User advantages
Temporary immersion IP 68
6-collet cluster
Allows a wide range of cable diameter
applications for a single connector.
Reduces inventory
Removable contacts
Crimp versions allow easier wiring and
maintenance.
Environmentally Sealed
Push Pull Connectors
228
Shell type
• Available JKX shells
ER : fixed receptacle, front panel mounting
EP : fixed receptacle, back panel mounted
(appropriate with 900 contacts for PCB)
PC : cable mounted receptacle
FD : straight plug with cable clamping
• Dimensions
FD : Straight plug with cable clamping
Size
0
1
A
47
57
Ø B
12
15
Ø M
1.5 to 4.5
2 to 6
ER : Fixed receptacle, front panel mounting
Size
0
1
A
19.5
24.5
B
4.5
8.5
C
4
4.5
Ø D
18
20
EP : Fixed receptacle, back panel mounting
Size
0
1
A
19.5
24.5
B
4.5
6
C
3.2
4
Ø D
18
20
PC : Cable mounted receptacle
• Option G : to accomodate bigger cables
Size
0
1
A
51
60
ØB
12
15
Ø M
4.6 to 6
6 to 8
Size
0
1
A
_
60
Ø B
_
16
Ø C
_
2 to 6
Environmentally Sealed
Push Pull Connectors
229
Keying
Contacts
• Multi contacts inserts
Only G keying is available in standard
version (0° keying angle, plugs with pin
contacts, receptacles with female con-
tacts) for the shell styles.
Shell size Key ER EP PC FD
0Gll _l
1Gllll
l Concerning the availability of other alternatives, please consult our commercial office.
Male AWG Max. Testing Working
Shell insulator Contact S C P* Q* ØSolder Crimp current voltage voltage
size viewed from layout solder crimp straight 90° Contact wire wire rating (Vdc /
wiring side PCB tails PCB tails Max. Max. (A) (Vrms) Vrms)
02 S C P Q 0.9 24 20 10 1400 660/460
03 S C P Q 0.9 24 20 8 1300 600/420
04 S C P Q 0.7 26 22 7 1400 660/460
05 S C P Q 0.7 26 22 6.5 800 400/260
06 S P 0.5 28 - 2.5 680 320/220
07 S P 0.5 28 - 2.5 680 320/220
02 S C 1.3 20 18 15 1600 760/530
03 SC 1.3 20 18 12 1300 600/420
04 S C P Q 0.9 24 20 10 1900 900/630
05 S C P Q 0.9 24 20 9 1400 660/460
06 SCP Q 0.7 26 22 7 1400 660/460
07 S C P Q 0.7 26 22 7 1400 660/460
08 S C P Q 0.7 26 22 5 1200 600/420
10 S0.5 28 -2.5 600 300/200
Inserts with fixed contacts (non removable contacts) * For receptacles with female contacts only
Available Contact types
0
1
Environmentally Sealed
Push Pull Connectors
230
Options
• Protective boot
• Caps : Protect the recptacle to IP68
With each JKX connector, one protective boot can accept diverse cable diameters thus the end-user can manage various cable
diameters without bothering with multiple part numbers.
Material :
ELASTOLLAN (PUR)
Working temperature :
- 40°C ; + 80°C
- 40°F ; + 176°F
Shell Dimensions
Part Shell size
number size option Ø AL Ø Câble
Gmin Max.
JBX 1 MP* 1 0 2.6 25 2 7.5
JBX 2 MP* - 1 4 30 3.5 9.7
Color code Colors
Ablue
Bwhite
G grey
Jyellow
Mbrown
N black
R red
V green
O orange
* Color code
Part number Ø
JKX BR0 14
JKX BR1 16
Parts that require a protective boot
need to be ordered with an M suffix.
Protective boots are ordered sepa-
rately.
JBX 0 MP* 0 - 2.2 20 1.5 5.5
Environmentally Sealed
Push Pull Connectors
231
Technical characteristics
• Material and treatment
• Mechanical and climatics
Component Material Standard Surface treatment (µm)
ISO ASTM Cr Ni Au
Outer shell and collet nut Brass CuZn40Pb3 C38500/C360 0.1 - 0.6 5 - 8 -
Latching sleeve Brass CuZn40Pb3 C38500/C360 - 5 - 8 -
Shielding ring Brass CuZn40Pb3 C38500/C360 - 3 - 7 -
Nut Brass CuZn40Pb3 C38500/C360 5 - 8 -
Tapered washer and half bushes Brass CuZn40Pb3 C38500/C360 - 5 - 8 -
Socket contact (1) Cupro-nickel CuNi1Pb1P CDAC19150 - 3 - 5 0.5
Pin contact (1) Brass CuZn35Pb2 C38500/C360 - 3 - 5 0.5
Clip Beryllium copper CuBe1,9 C17200/C360 - - -
Component Material Color Temperature withstanding
InsertPEEK + 30%GF brown - 50°C + 250°C - 58°F + 482°F
Collet PA 6/6 + MoS2 black - 55°C + 125°C - 67°F + 257°F
Cable seal Silicon rubber red - 50°C + 250°C - 58°F + 482°F
Characteristics Values Standard Method
Endurance > 1000 cycles (except for 0.7 mm crimp contacts for which MIL-STD 2016.1
endurance is limited to 500 cycles) 1344A
Shock 50 g, duration 6 ms ; contact Ø0.7 mm and 0.9 mm MIL-STD 2004.1
100 g, duration 6 ms ; contact Ø1.3 mm - 1.6 mm and 2 mm 1344A
Vibrations 10 to 2000 Hz γ= 15 g, contact Ø0.7 mm and 0.9 mm MIL-STD 2005.1
γ= 20 g, contact Ø1.3 mm - 1.6 mm and 2 mm 1344A
Protection index IP 68 (watertight - 48 hours under 1 m of water) CEI 529
- 55°C + 125°C
with plastic collets - 67°F + 257°F --
Operating temperature
with optional metal collets - 55°C + 200°C
- 67°F + 392°F - -
(only on request, consult SOURIAU)
(1) Gold thickness as per MIL-G-45204C type 1, class 00.
}
}
Environmentally Sealed
Push Pull Connectors
232
Wiring and assembly instructions
• Panel cutout
• Removable contacts
Reliable design
Crimp contacts
Solder contacts
• Conical entry with chamfered edge on the socket contact and smooth slope on the pin con-
tact ensure perfect concentric mating even when handled carelessly.
• The pressure spring of the socket contact maintains a constant force on the pin contact
when mated.
Contact Usable cables Max. Contact Endurance
Core section (mm2)current resistance (number
Ø CØ F AWG rating (A) (m?) of cycles)
min Max.
0.7 0.85 0.129 0.326
22 - 24 - 26
7 5 500 Max.
0.9 1.1 0.205 0.518
20 - 22 - 24
10 3.5 > 1000
1.3 1.4 0.326 0.823
18 - 20 - 22
15 3 > 1000
Contact Usable cables Max. Contact Endurance
Core section (mm2)current resistance (number
Ø CØ F AWG rating (A) (m?) of cycles)
min Max.
0.9 0.8
-
0.21 24 10 3.5 > 1000
1.3 1.1
-
0.60 20 15 3 > 1000
The conductor bucket on the solder contacts is designed with an angle to form a cup into which the solder can flow easily.
• Fixed contacts
Solder contacts
Contact Usable cables Max. Contact Endurance
Shell
Core section
current resistance (number
Ø
C
Ø
F size
(mm2) Max.
AWG rating (A) (m
?
) of cycles)
0.5 0.5 0 - 1 0.096 28 5 10 > 1000
0.7 0.63 0 - 1 0.15 26 7 5 > 1000
Contacts for PCB
Contact Max. Contact Endurance
Shell current resistance
(number
Ø CØ Fsize Lrating (A) (m?) of cycles)
0.7 0.5 0575> 1000
16
0.5 0.5 05.5 510 > 1000
0.9 0.7 05
10 3.5 > 1000
16
Size 0 1
Ø F 14.1 16.1
L12.6 14.6
Environmentally Sealed
Push Pull Connectors
233
? 1.35
> 1.35
? 1.6
> 1.6
? 1.35
> 1.35
? 1.6
> 1.6
? 2.1
> 2.1
Wiring and assembly instructions
• Cable stripping for connectors with crimp contacts
• Cable stripping for connectors with solder contacts
Stripping for FD / PC
LCT
0.7 15 7
0.9 15 7
0.7 17 8
10.9 17 8
1.3 17 8
Shell size Ø Contacts Ø I
Shell size Ø Contacts
0
1
0
4
5.5
4
5.5
4
5.5
4
5.5
4
5.5
Stripping for FD / PC
LST
0.5 11 2 7
0.7 12 3 7
0.9 12 3 7
0.5 13 2 8
0.7 14 3 8
0.9 14 3 8
1.3 14 3.5 8
ØI : diameter over insulation
À:O’ring for sealing between receptacle and plug shell
Á:O’ring for sealing between receptacle and panel
Â:O’ring for sealing between plug body and backshell
?:seals to accomodate variety of cable diameters
Fixed receptacle Straight plug
• Watertightness design (mated connectors)
Environmentally Sealed
Push Pull Connectors
234
• Connector preparation
1 - Select the proper collet ?and the cable
gland  (see page 39).
2 - Slide protective boot ?, the backnut Ä,
the collet ?, the cable gland Â, the out-
ershell Áand the taper seat Àonto the
cable.
• Contacts wiring : crimp contacts
1 - Select the proper crimping tool (see page
49) and positionner according to connec-
tors involved.
2 - Adjust the tool selector for the corre-
sponding conductor AWG.
3 - Crimp the contacts Çthen engage them
into the insert cavities ?till clip tightening.
• Contacts wiring : solder contacts
Fixed solder contacts 0.5 mm and 0.7 mm Removable solder contacts from 0.9 mm to 1.3 mm
1 - Terminate the bucket contacts 1 - Solder the conductors to the contact buckets them
using solder method engage them into the insert cavities ?till clip tightening
• Connector assembly
1 - In case of screened cable, comb out the
screen and fold back over the tapper
seat À.
2 - Position 2 half bushes È, making sure
that the insert key appears through the
windows of one bush.
3 - Position the taper seat Àon the half bush-
es È.
4 - Position all the sub-assembly in connector
housing É, making sure to keep the sub-
assembly well aligned.
5 - Screw the outershell Áfollowing the
torque values on page 39. Install the cable
gland Âand the collet ?into the outershell
Áthen screw the backnut Ätill bottom-
ing. Use 2 wrenches well positionned on
the flats A and B. Place a wrench to grip
flats B, use the other wrench to tighten
the backnut at the flats A following the
torque values on page 39.
6 - Install the protective boot ?if exists.
Wiring and assembly
instructions :
STRAIGHT PLUG
• Cable stripping : see page 37
Environmentally Sealed
Push Pull Connectors
235
• Collets selection according to cable diameters
3 or 5 collets per shell size allow a wide range of cable diameters for a single connector. Cable out diameters are for informa-
tion only, since values will change with each cable construction.
Cable diameter
Shell size 0 Size 0, option G Shell size 1 Size 1, option G
1 1.5 - 2.5 - 2- 2.5 -
22.6 - 3.5 - 2.6 - 3.5 -
33.6 - 4.5 - 3.6 - 4.5 6.1 - 6.7
4-4.6 - 5.5 4.6 - 5.5 6.8 - 7.7
5- 5.6 - 65.6 - 67.8 - 8
Collet number 4 in shell size 0 and collet number 6 in shell size 1 are not used.
• Glands selection to accomodate cable diameters
Collet number
Cable diameter
Shell size 0 Size 0, option G Shell size 1 Size 1, option G
21.5 - 2.9
3.5 3 - 4.5
2.5 2 - 3.4 -
44.6 - 4.9 3.5 - 4.9 -
5.5 5 - 6 5 - 6 6.1 - 6.4
76.5 - 8
Cable gland
Ø A
2
4
3
5
6
1
Advised torque* in Nm
00
(option G) 11
(option G)
1.6 / 1.8 /
1.5 2.5
0.8 1
22
0.8 1
Size
14 x 1 16 x 1
00
(option G) 11
(option G)
17
813
10 11 12 14
19
10
Size
Tools
(jaw dimensions)
Wiring and assembly instructions
• Coupling torques
Torque values are the maximum allowable for each connector size.
Torque values will vary due to the type and size of the cable used.
*Apply thread lock to back nut prior to assembly.
Tool numbers can be found on page 228.
• Shielding
Tested according to MIL-STD 1344 A, method 3007
Shell size
04
13
G
A
mV
Ø A
Electrical
continuity (m?)
JKX Plug Assembly Instructions
236
1. Determine what size cable you will be
using. Then select the proper collet
number for that cable.
• Collets selection according to cable diameter
3 or 5 collets per shell size allow a wide range of cable diameters for a single connector. Cable out diameters are for informa-
tion only, since values will change with each cable construction.
Collet number 4 in shell size 0 and collet number 6 in shell size 1 are not used
2. Strip the cable and each wire to the required strip length.
• Cable stripping for connectors with crimp contacts
• Cable stripping for connectors with solder contacts
Collet
Number
Cable Diameter
Shell Size 0 Size 0, Option G Shell Size 1 Size 1, Option G
11.5 - 2.5 — 2 - 2.5 —
2 2.6 - 3.5 — 2.6 - 3.5 —
3 3.6 - 4.5 — 3.6 - 4.5 6.1 - 6.7
4—4.6 - 5.5 4.6 - 5.5 6.8 - 7.7
5 — 5.6 - 6 5.6 - 6 7.8 - 8
Shell Size ø Contacts ø I Stripping for FD/PC
L C T
00.7 ≤1.35 15 47
>1.35 5.5
0.9 ≤1.6 15 47
>1.6 5.5
1
0.7 ≤1.35 17 48
>1.35 5.5
0.9 ≤1.6 17 48
>1.6 5.5
1.3 ≤2.1 17 48
>2.1 5.5
Straight Plug Assembly
Protective Boot
Shell Size
ø Contacts Stripping for FD/PC
L S T
0
0.5
11
2 7
0.7 12 3 7
0.9 12 3 7
1
0.5 13 2 8
0.7 14 3 8
0.9 14 3 8
1.3 14 3.5 8
JKX Plug Assembly Instructions
237
3. When assembling a plug with a protective boot, prep the cable by taking the protective boot (#6) and sliding it with the small
inside diameter first onto the cable. Then slide the small diameter end of the back nut (#5) onto the cable. Next, take the col-
let (#4) and slide the end with the gripping teeth (See below) first onto the cable. Then take a cable gland (#3) and slide it
onto the cable. Once the cable gland is in place take an outer shell (#2) and slide it onto the cable with the outside threads
going onto the cable first. Then take the flat end of a taper seat (#1) and slide that onto the cable so that the chamfer side is
pointing outward.
Collet
Connector Preparation
4. Attach removable contacts to wires:
a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires using the proper crimping tool set on
the correct AWG wire size After the contact has been crimped to the wire, check each contact to insure that the contact is
securely crimped to the wire.
Crimping Tool
Specifications MIL-C-22520 / 7.01
Contacts 0.7 mm - 0.9 mm
and 1.3 mm
MIL P/N - Souriau P/N Supplier P/N
MIL-22520/7-01 Daniels: MH860
Buchanan: 616 336
Specifications MIL-C-22520 / 1.01
Contacts 1.6 mm and 2 mm
MIL P/N - Souriau P/N Supplier P/N
MIL-22520/1-01 Daniels: AF8
Buchanan: 615 708
JKX Plug Assembly Instructions
238
Locator Pin and Socket .07-.09 mm and 1.3 mm contacts
Turret with locator for pin and socketr 1.6 mm and 2 mm contacts
b. If using soldered contacts, prep each wire with flux and then tin dip each exposed wire end. Next pre-load a piece of heat
shrink onto the wire (Individual heat shrink tubes are optional). Solder each wire to the solder cup end of the contact. To
avoid shorts, make sure that no solder comes in contact with any other contact or wire on the connector. After the contact
has been soldered to the wire, check each contact to insure that the contact is securely soldered to the wire. Slide the pre-
loaded heat shrink over the solder joint and shrink into place. Do not over-heat the solder joint area as it can cause the sol-
der to re-flow or it could burn the wire insulation.
5. If inserting removable contacts:
a. Starting with the interface end of the contact, carefully insert each contact into the backside of the insulator that has the
position loading path indicator (worm) on it. Start with the end of the position loading path indicator (worm) that has the
half circle on it (Position #1). Then follow the position loading path indicator (worm) around the insulator. You will go
counter clockwise if using a male contact and clockwise if using a female contact (see diagram below for the position load-
ing path indicator (worm) layout). If the connector has center contacts, it is sometimes easier to start at the end of the
position loading path indicator (worm) (last position) and work backwards. This is up to the assembler and the process they
are using to insert the contacts. Make sure not to bend the contact when inserting it into the insulator. It is extremely
important that the contact is completely seated in to the insulator. For the connector to function properly, the contact
should click/snap into place when seated. To confirm the seating of the contact, check each contact for proper seating.
Shell
Size
ø
Contacts AWG Male Contact Female Contact
Souriau P/N Daniels P/N Astro P/N Souriau P/N Daniels P/N Astro P/N
00.7 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LP07 86 - 224 /
0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LP09 86 - 226 /
1
0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LP07 86 - 197 642 - 004
0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LP09 86 - 199 642 - 005
1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LP13 86 - 201 642 - 006
2
0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LP07 86 - 203 642 - 010
0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LP09 86 - 205 642 - 011
1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LP13 86 - 207 642 - 012
3
0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LP07 86 - 214 642 - 017
0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LP09 86 - 215 642 - 018
1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LP13 86 - 216 642 - 019
Shell Size ø Contacts AWG Male and Female Contacts
Souriau P/N Daniels P/N Astro P/N
21.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030
2 12 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031
31.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038
2 12 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035
JKX Plug Assembly Instructions
239
6. Removal of Contacts:
a. Using the proper extraction tool insert the tool over the front of the contact and push contact out. Failure to use the proper
extraction tool can result in damage to the contact.
7. Take the keyed half bushing (#9) and place it over the insulator so that the window is lined up with the key on the insulator
and the key on the half bushing is pointing to the interface end of the insulator (interface end of connector). Then take the
half bushing without the window (#9) and place on the opposite side of the insulator so that both half bushings are aligned
with each other.
Connector Assembly
8. Take the contact assembly that is mounted on the cable and using the red dot as a reference, align the slot on the inside of
the connector (#10) with the keys on the end of the half bushings (you may need to spin the assembly slightly). Insure that
the keys are seated properly by turning the insulator and contact assembly. If the assembly does not turn, then the keys are
correctly aligned. If the assembly does turn, then you must withdraw the assembly & realign the keys.
Shell Size ø Contacts Souriau Part Number Astro Part Number
00.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
2
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
1.6 JBX OUT DC 16 ATJP 2095
2.0 JBX OUT DC 20 ATJP 2115
3
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
1.6 JBX OUT DC 16 ATJP 2095
2.0 JBX OUT DC 20 ATJP 2115
JKX Plug Assembly Instructions
240
9. Then push the preloaded taper seat (if a shielded cable is being used, comb out the shielding and fold back over the
taperseat) and outer shell into the connector housing and thread the outer shell into the housing until it is hand tight and you
can feel the o-ring being compressed.
10. Once the outer shell is installed onto the connector housing, apply thread lock to thread area. Then slide the cable glade
(#3) collet (#4) and back nut (#5) up until you can manually start the back nut threads onto the threaded end of the connec-
tor housing. Tighten the back nut up as far as you can by hand, then take the appropriate wrenches and place the wrenches
onto the “A” & “B” flats located on the connector housing. Do not over torque back nut as it can cause connector failure.
(See torque requirements listed below)
Coupling Torques
11. If the connector requires a protective boot, slide the boot over the lip on the back nut.
Size A ø B ø M
0 47 12 1.5 to 4.5
157 15 2 to 6
Advised torque* in Nm Tools
(jaw dimensions) 14 x 1 16 x 1
Size 0 0
(Option G) 11
(Option G) Size 0 0
(Option G) 11
(Option G)
1.6 / 1.8 / 17 19
1.5 2 2 2.5 8 10 13
0.8 0.8 1 1 10 11 12 14
JKX Plug Assembly Instructions
241
T
Tr
ro
ou
ub
bl
le
e s
sh
ho
oo
ot
ti
in
ng
g
Problem: Cause: Correction:
Contact will not seat in connector, contact back-
ing out.
Wrong wire or insulation size, wrong strip length,
poor crimping, broken clips, damaged insulator,
removed contact without proper removal tool,
bad crimp.
Use correct wire, adjust strip length, strip and re-
crimp with new contact, replace insulator, using
wrong crimp tool, replace contact.
Bent solder contact Bent in handling, bent in soldering operation,
connector assembled incorrectly.
Replace with new insert and/or contacts.
Pins and insulator were inserted into electrical
test while unprotected by shell
Connector will not release from mating part or
operate correctly
Not using flats on latching sleeve and back nut
to torque connector, improper assembly of the
connector, over mold material inside connector.
Release back nut and re-torque, disassemble
and reassemble, replace connector.
Over tightened the back nut. Connector will not release from mating part or
operate correctly, damage connector.
Loosen back nut and retighten.
Collet will not grip cable. Loose cable in connector. Check correct collet size is being used.
Connector will not assemble. Incorrect alignment of key in connector, half
bushings, connector housing, insulator, collet,
braid in key slots in collet.
Disassemble connector and reassemble connec-
tor-aligning keys, relocate braid in collet.
Contact stubbing after mating. Bent contact and damaged contact, connector-
assembled incorrectly.
Re-align contact, replace insert with contacts.
Electrical failure. Improper crimping, wrong wire strip length, wire
loading incorrect location, poor solder joint.
Remove contact with correct removal tool, rein-
stall new contact, and verify strip length.
Leakage of Seals Over torque of nut Disassemble connector and inspect seals
JKX Receptacle Assembly Instructions
242
1. Select the proper JKX receptacle and contact size for the specific cable application by using the contact layout chart as
depicted in the Push Pull catalog.
2. Strip the cable/wire to the required strip length.
Wiring and Assembly Instructions
• Cable stripping for connectors with crimp contacts
• Cable stripping for connectors with solder contacts
3. Depending on application and shell type, the nut and washer may be removed before attaching the wires to the contacts.
4. Attach crimped contacts to wires:
a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires using the proper crimping tool and loca-
tor set on the correct AWG wire size. After the contact has been crimped to the wire, check each contact to insure that
the contact is securely crimped.
Shell Size ø Contacts ø I Stripping for FD/PC
L C T
00.7 ≤1.35 15 47
>1.35 5.5
0.9 ≤1.6 15 47
>1.6 5.5
1
0.7 ≤1.35 17 48
>1.35 5.5
0.9 ≤1.6 17 48
>1.6 5.5
1.3 ≤2.1 17 48
>2.1 5.5
Shell Size ø Contacts Stripping for FD/PC
L S T
0
0.5 11 2 7
0.7 12 3 7
0.9 12 3 7
1
0.5 13 2 8
0.7 14 3 8
0.9 14 3 8
1.3 14 3.5 8
JKX Receptacle Assembly Instructions
243
Crimping Tool
Locator Pin and Socket .07-.09 mm and 1.3 mm contacts
Turret with locator for pin and socketr 1.6 mm and 2 mm contacts
b. If using clipped solder contacts, prep each wire with flux and then tin dip each exposed wire end. Next pre-load a piece of
heat shrink onto the wire (Individual heat shrink tubes are optional). Solder each wire to the solder cup end of the contact.
To avoid shorts, make sure that no solder comes in contact with any other contact or wire on the connector. After the con-
tact has been soldered to the wire, check each contact to insure that the contact is securely soldered to the wire. Slide the
pre-loaded heat shrink over the solder joint and shrink into place. Do not over-heat the solder joint area as it can cause the
solder to re-flow or it could burn the wire insulation.
Specifications MIL-C-22520 / 7.01
Contacts 0.7 mm - 0.9 mm
and 1.3 mm
MIL P/N - Souriau P/N Supplier P/N
MIL-22520/7-01 Daniels: MH860
Buchanan: 616 336
Specifications MIL-C-22520 / 1.01
Contacts 1.6 mm and 2 mm
MIL P/N - Souriau P/N Supplier P/N
MIL-22520/1-01 Daniels: AF8
Buchanan: 615 708
Shell
Size
ø
Contacts AWG Male Contact Female Contact
Souriau P/N Daniels P/N Astro P/N Souriau P/N Daniels P/N Astro P/N
00.7 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LP07 86 - 224 /
0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LP09 86 - 226 /
1
0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LP07 86 - 197 642 - 004
0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LP09 86 - 199 642 - 005
1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LP13 86 - 201 642 - 006
2
0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LP07 86 - 203 642 - 010
0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LP09 86 - 205 642 - 011
1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LP13 86 - 207 642 - 012
3
0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LP07 86 - 214 642 - 017
0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LP09 86 - 215 642 - 018
1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LP13 86 - 216 642 - 019
Shell Size ø Contacts AWG Male and Female Contacts
Souriau P/N Daniels P/N Astro P/N
21.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030
2 12 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031
31.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038
2 12 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035
JKX Receptacle Assembly Instructions
244
5. If inserting terminated contacts:
a. Starting with the interface end of the contact, insert each contact into the backside of the insulator that has the position
loading path indicator (worm) on it. Start with the end of the position loading path indicator (worm) that has the half circle
on it (Position #1). Then follow the position loading path indicator (worm) around the insulator. You will go counter clock-
wise if using a male contact and clockwise if using a female contact (see diagram below for the position loading path indi-
cator (worm) layout). If the connector has center contacts, it is sometimes easier to start at the end of the position loading
path indicator (worm) (last position) and work backwards. This is up to the assembler and the process used to insert the
contacts. Make sure not to bend the contact when inserting it into the insulator. It is extremely important that the contact
is seated in the insulator for the connector to function properly. The contact should click/snap into place when seated.
Check each contact for proper seating.
6. Removal of contacts:
a. Using the proper extraction tool (See FIGURE 6.A), insert the tool over the front of the contact and push contact out.
Failure to use the proper extraction tool can result in damage to the contact.
Shell Size ø Contacts Souriau Part Number Astro Part Number
00.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
2
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
1.6 JBX OUT DC 16 ATJP 2095
2.0 JBX OUT DC 20 ATJP 2115
3
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 ATJP 2057
1.3 JBX OUT DC 13 ATJP 2077
1.6 JBX OUT DC 16 ATJP 2095
2.0 JBX OUT DC 20 ATJP 2115
JKX Receptacle Assembly Instructions
245
T
Tr
ro
ou
ub
bl
le
e s
sh
ho
oo
ot
ti
in
ng
g
Problem: Cause: Correction:
Contact will not seat in connector, contact back-
ing out.
Wrong wire or insulation size, wrong strip length,
poor crimping, broken clips, damaged insulator,
removed contact without proper removal tool,
bad crimp.
Use correct wire, adjust strip length, strip and re-
crimp with new contact, replace insulator, using
correct crimp tool, replace contact.
Bent solder contact Bent in handling, bent in soldering operation,
connector assembled incorrectly.
Replace insert with contacts.
Contact stubbing after mating. Bent contact and damaged contact, connector-
assembled incorrectly.
Re-align contact, replace insert with contacts.
Electrical failure. Improper crimping, wrong wire strip length, wire
loading incorrect location, poor solder joint.
Remove contact with correct removal tool, rein-
stall new contact, and verify strip length.
Push Pull Connectors
sealed version size 2
246
Key features
• Sealed IP 67 (mated connectors)
• Mechanically keyed : ensure correct polarisa-
tion and alignment.
• Contact arrangements : from 2 to 19 con-
tacts.
• Wire gauge range from 26 AWG to 12
AWG.
• High contact density in a small space.
• Contact termination in either crimp, solder ,
or PCB contacts.
Part number system
RS D SC
M12G2
FE
JBX
Basic series
Shell type FE-EC-PE-SE
Shell size 2
Keying G
Contact layouts 02 ---------- 19
Contact type M: pin F: socket (in relation with keying)
Contact termination C: crimp ; S: solder ; P* : straight PCB tails ; Q* : 90° PCB tails
Material & surface plating S: Outer shell in brass alloy with chrome over nickel
N: Outer shell in brass alloy with black plating (consult Souriau US)
D: Obligatory suffix
S: Obligatory suffix
Option R: Red dot (possible for FE, PE, HH, HHE only)
* For receptacles with female contacts only.
User advantages
Wet environment
Splash proof IP 67
6-collet cluster
Allows a wide range of cable diameter
applications for a single connector.
Removable contacts
Crimp versions allow easier wiring and
maintenance.
Push Pull Connectors
sealed version size 2
247
Shell type
• Available sealed JBX, Size 2
• Dimensions
FE : Straight plug with cable clamping
EC : double nut receptacle
PE : Cable mounted receptacle
SE : Fixed receptacle with cable clamping
Note 1 : For the plug, the cable clamp receptacle and the free receptacle, a black protective boot is included in the P/N.
FE : Straight plug EC : Double nut receptacle
SE : Cable clamp receptacle PE : Cable mounted receptacle
Push Pull Connectors
sealed version size 2
248
Keying
Only G keying is available in standard version (0° keying angle, plugs with pin contacts, receptacles with female contacts) for
the different types of shells.
Contact layouts
• Multi contact inserts
Male AWG Max. Testing Working
Shell insulator Contact S C P* Q* ØSolder Crimp current voltage voltage
size viewed from layout solder crimp straight 90° Contact wire wire rating (Vdc /
wiring side PCB tails PCB tails Max. Max. (A) (Vrms) Vrms)
02 S C 2 16 12 30 2100 1000/700
03 S C 1.6 18 14 17 1700 830/560
04 S C 1.3 20 18 15 2400 1000/800
05 S C 1.3 20 18 14 1900 900/630
06 SC 1.3 20 18 12 1900 900/630
07 S C 1.3 20 18 11 1500 730/500
08 S C P Q 0.9 24 20 10 1700 830/560
10 S C P Q 0.9 24 20 8 1700 830/560
12 S C P Q 0.7 26 22 7 1700 830/560
16 SC P Q 0.7 26 22 6 1500 730/500
18 SCP 0.7 26 22 5.5 1400 660/460
19 SCP0.7 26 22 5 1400 660/460
Inserts with fixed non removable contacts
* For EC receptacles with female contacts.
Available Contact types
2
Push Pull Connectors
sealed version size 2
249
Technical characteristics
The technical characteristics are the same as for the standard JBX series except the following ones:
• Material - Specific additionnal elements
Component Material Color Working temperature
Seals Nitrile & Silicon rubber
O’ring = black
- 40°C ; + 250°C - 58°F ; + 482°F
plug seal = black
Protective boot Elastollan (PUR) Black - 40°C ; + 80°C - 40°F ; + 176°F
Characteristics Values
Protection index IP 67 (Splashproof - 1/2 hour under 1 m of water)
Operating temperature - 40°C ; + 80°C - 40°F ; + 176°F
• Mechanical and climatics - Specific additional elements
Options
• Cap: Part-number = JBX BR2 022 : an efficient protection against water
Wiring and assembly instructions
• Panel cutout
The panel cutout is the same as for the JBX size 2 shells except for the HC (or HCE) type for which it corresponds to the JBX
size 3 shells.
• Range of cable diameter: from 6 to 9 mm
• Operation to add during the plug assembly:
Deposit of watertight thread glue between the backnut (Áon the drawing p17) and the connection shell (?on the drawing p17).
Advised glue = Loctite 542.
Sealed Breakaway Connector
250
Souriau JDX Breakaway Connectors
Key Features
Breakaway design eliminates the need for a manually operated latching system
Mates and un-mates quickly and prevents injury to the user or
equipment if the cable becomes entangled.
Sealed to IP68.
Two shell sizes, 2 to 19 positions.
Contact termination solder & PCB.
Custom cable assemblies.
R NSM05T2FD
JDX
Basic Series
Shell Type FD-EP-EZ-PC
Shell Size 0 - 2
Keying T & U
Contact Layout Size 0; 2, 3, 4, 5, 6, 7, 8
Size 2; 2, 3, 4, 5, 6, 7, 8, 10, 12, 16, 18, 19
Contact Type M: pin F: socket
Contact Termination S: solder ; P: PCB
Surface Plating N: Outer shell, brass alloy with black chrome over nickel
S: Outer shell, brass alloy with chrome over nickel
Orientation Red dot
FD & PC are only sold as part of a cable assembly.
Contact Souriau for information on custom cable assemblies.
Part Numbering System
JDX Shell Styles
Sealed Breakaway Connector
251
Size 0 Size 2
EP: Fixed receptacle front panel mounted, fixed flange EP: Fixed receptacle front panel mounted, fixed flange
EZ: Straight PCB mounted receptacle EZ: Straight PCB mounted receptacle
PC: Straight cable mounted receptacle PC: Straight cable mounted receptacle
FD: Straight cable mounted plug FD: Straight cable mounted plug
FA: Front panel mounted plug FA: Front panel mounted plug
Sealed Breakaway Connector
252
Contact Layouts
Non- removable contacts
• Voltage Test Procedure
- The testing voltage corresponds to the maximum voltage the connector is able to withstand in normal climatic conditions.
The value is about 75% of the electrical breakdown voltage. The testing voltage level can be reached several times in con-
nectors life, but never applied for a continuous duration.
- The working voltage corresponds to the maximum voltage the connector is able to withstand continuously during its life
time, in real environmental conditions, even with high temperature. The value is around 1/3 of the testing voltage.
Shell Size
Male
Insulator
Viewed From
Wire Side
Contact
Layout Solder PCB
Contact
Diameter
mm
Solder Wire
MAX
MAX Current
Rating
Test Voltage
(Vrms)
Working
Voltage
(Vrms)
0
02 S P 0.9 24 10 1400 660/460
03 S P 0.9 24 8 1300 600/420
04
S
P 0.7 26 7 1400 660/460
05 S P 0.7 26 6.5 800 400/260
06 S P 0.5 30 2.5 680 320/220
07 S P 0.5 30 2.5 680 320/220
08 S P 0.5 30 2.5 680 320/220
2
02 S 2 16 30 2100 1000/700
03 S 1.6 18 17 1700 830/560
04 S P 1.3 20 15 2400 1000/800
05 S P 1.3 20 14 1900 900/630
06 S P 1.3 20 12 1900 900/630
07 S P 1.3 20 11 1500 730/500
08 S P 0.9 24 10 1700 830/560
10 S P 0.9 24 8 1700 830/560
12 S P 0.7 26 7 1700 830/561
16 S P 0.7 26 6 1500 730/500
18 S P 0.7 26 5.5 1400 660/460
19 S P 0.7 26 5 1400 660/460
Keying Options
Size 0 Size 2
T & U T & U
Key T U
Plug &
Receptacles
Technical Characteristics
Mechanical, Climatic & Electrical
Sealed Breakaway Connector
253
Size 0 2
A 12.1 15
B 10.6 14.6
Component Material Standard Surface Treatment (um)
Cr Ni Au
Shell Brass C38500/C3600 0.1 - 0.6 5 - 8
Shell Aluminum, Contact Souriau for Availability & Part Number AISI 7075-T6 0.1 - 0.6 5 - 8
Nut Brass C38500/C3600 0.1 - 0.6 5 - 8
Nut Aluminum, Contact Souriau for Availability & Part Number AISI 7075-T6 0.1 - 0.6 5 - 8
Pin Contact Brass C38500/C3600 3 - 5 0.5
Socket Contact Copper Nickel CAD C 19150 3 - 5 0.5
Clip Beryllium Copper 17200
Shielding Ring Copper Alloy (Proprietary — 3 - 7
Characteristics Values Standard Method
Endurance >2,500 cycles Mil-Std-1344A 2016.1
Insulation resistance >500M ohm ANSI-EIA-364-D 21
EMI Shielding (60dB min. up to 100MHz)
(35dB min. up to 1GHz) ANSI-EIA-364-D 66
Thermal Shock - 40 C to + 125 c
5 cycles ANSI-EIA-364-D 32
Mechanical Shock 300 g, 3ms ANSI-EIA-364-D 27
Vibrations 10 to 2000 HZ y = 15 g Mil-Std-1344A 2005.1
Random Vibrations ANSI-EIA-364-D 28, test concision 4
Altitude Immersion 3 cycles (3*30min), 3
Humidity 240 hours @ 40 C 90%RH ANSI-EIA-364-D 31
Resistance to Fluids
Kerosene JP8
(NATO code F34)
Gasoline ASTM D
4814*
Mineral oil
NATO code H515
ANSI-EIA-364-D 10
Protection index IP68 mated & un-mated IEC 529 14.2.8
Operating temperature - 40 C to + 125 c
5 cycles
Sealed Breakaway Connector
254
PCB Contacts
Solder Contacts2
Contact Usable Cables
Core Section (mm) AWG
Max Current
Rating (A)
Contact
Resistance
(mΩ)
Endurance
# of Cycles
C F
0.5 0.5 min max 28 5 10 >1,000
0.7 0.63 — 0.3 26 7 5 >1,000
0.9 0.8 — 0.21 24 10 3.5 >1,000
1.3 1.1 — 0.6 20 15 3 >1,000
1.6 1.5 — 0.93 18 17 2.5 >1,000
2 1.9 — 1.34 16 30 2.5
>1,000
0.5 mm female PCB tail length size 0 Dimension “L” 4 mm
0.7 mm female PCB tail length size 0 Dimension “L” 4 mm
0.9 mm female PCB tail length size 0 Dimension “L” 4 mm
0.7 mm female PCB tail length size 2 Dimension “L” 6.0 mm
0.9 mm female PCB tail length size 2 Dimension “L” 6.0mm
1.3 mm female PCB tail length size 2 Dimension “L” 6.0 mm
Push-Pull connectors
255
Accessories JBX
• Insulating washer
Part Shell
number size ØA B L M N T E
JBX 00 RIN 00 10 8.8 1.8 1 0.8 8 4.4
JBX 0 RI* 0 12 10.8 1.8 1 0.8 9.9 6.4
JBX 1 RI* 116 13.8 1.8 1 0.8 12.2 8.4
JBX 2 RI* 2 21 17.8 2.2 1.2 0.8 16.2 8.2
JBX 3 RI* 3 25 21.8 2.2 1.2 0.8 20.2 10.1
* Washer colors as protective boots.
In size 00, available only in black.
Material : PA 6/6
Working temperature : - 40°C ; + 125°C
- 40°F ; + 257°F
Using 2 washers for receptacle / panel insulating
2 washers
Nut
Receptacle
• Grounding washer
Material : - Brass
- Nickel plated (3 µm)
Part Shell Dimensions
number size ØAØBL N
JAX RA 00 251 00 10 7.2 0.3 21.5
JAX RA 0 251 0 13 9.1 0.3 24
JAX RA 1 251 116 12.2 0.3 24
JAX RA 2 251 221 15.1 0.8 35
JAX RA 3 251 3 25 18.1 0.8 37
Ø A
Ø B L
N
Be careful : usable for the JAX and JBX series but not for sealed connectors (JKX and sealed JBX size 2).
Be careful : usable for the JBX series but not for sealed connectors (JKX and sealed JBX size 2).
256
Push-Pull connectors
Piece parts JBX-JKX
• Crimp contacts (if ordered separately)
Accessories JBX
• Locking washer
Part Number
Shell size Øcontact Crimp pin Crimp socket
0
1
2
3
0.9 JBX 0 CT MC 09 JBX 0 CT FC 09
0.7 JBX 0 CT MC 07 JBX 0 CT FC 07
1.3 JBX 1 CT MC 13 JBX 1 CT FC 13
0.9 JBX 1 CT MC 09 JBX 1 CT FC 09
0.7 JBX 1 CT MC 07 JBX 1 CT FC 07
2JBX 2 CT MC 20 JBX 2 CT FC 20
1.6 JBX 2 CT MC 16 JBX 2 CT FC 16
1.3 JBX 2 CT MC 13 JBX 2 CT FC 13
0.9 JBX 2 CT MC 09 JBX 2 CT FC 09
0.7 JBX 2 CT MC 07 JBX 2 CT FC 07
2JBX 3 CT MC 20 JBX 3 CT FC 20
1.6 JBX 3 CT MC 16 JBX 3 CT FC 16
1.3 JBX 3 CT MC 13 JBX 3 CT FC 13
0.9 JBX 3 CT MC 09 JBX 3 CT FC 09
0.7 JBX 3 CT MC 07 JBX 3 CT FC 07
• Solder contacts (if ordered separately)
Part Number
Shell size Øcontact Solder pin Solder socket
0
1
2
3
0.9 JBX 0 CT MS 09 JBX 0 CT FS 09
1.3 JBX 1 CT MS 13 JBX 1 CT FS 13
0.9 JBX 1 CT MS 09 JBX 1 CT FS 09
2 JBX 2 CT MS 20 JBX 2 CT FS 20
1.6 JBX 2 CT MS 16 JBX 2 CT FS 16
1.3 JBX 2 CT MS 13 JBX 2 CT FS 13
0.9 JBX 2 CT MS 09 JBX 2 CT FS 09
2 JBX 3 CT MS 20 JBX 3 CT FS 20
1.6 JBX 3 CT MS 16 JBX 3 CT FS 16
1.3 JBX 3 CT MS 13 JBX 3 CT FS 13
0.9 JBX 3 CT MS 09 JBX 3 CT FS 09
Solder contacts of 0.5 mm and 0.7 mm of diameter not available separately
(always fixed into the insulator).
Part Shell Dimensions
number size ØAØBC D
JAX RE 00 00 7.3 10 0.5 1
JAX RE 0 0 9.2 12.5 0.6 1
JAX RE 1 1 12.2 16 0.6 1
Push-Pull connectors
257
Piece parts JBX-JKX
• Inserts for removable solder and crimp contacts (if ordered separately)
• Inserts with fixed solder contacts (if ordered separately)
Insert Part Number
Shell size Insert Pin contacts Socket contacts
0
1
2
3
02 JBX 0 BI 02 MS JBX 0 BI 02 FS
03 JBX 0 BI 03 MS JBX 0 BI 03 FS
04 JBX 0 BI 04 MS JBX 0 BI 04 FS
05 JBX 0 BI 05 MS JBX 0 BI 05 FS
02 JBX 1 BI 02 MS JBX 1 BI 02 FS
03 JBX 1 BI 03 MS JBX 1 BI 03 FS
04 JBX 1 BI 04 MS JBX 1 BI 04 FS
05 JBX 1 BI 05 MS JBX 1 BI 05 FS
06 JBX 1 BI 06 MS JBX 1 BI 06 FS
07 JBX 1 BI 07 MS JBX 1 BI 07 FS
08 JBX 1 BI 08 MS JBX 1 BI 08 FS
02 JBX 2 BI 02 MS JBX 2 BI 02 FS
03 JBX 2 BI 03 MS JBX 2 BI 03 FS
04 JBX 2 BI 04 MS JBX 2 BI 04 FS
05 JBX 2 BI 05 MS JBX 2 BI 05 FS
06 JBX 2 BI 06 MS JBX 2 BI 06 FS
07 JBX 2 BI 07 MS JBX 2 BI 07 FS
08 JBX 2 BI 08 MS JBX 2 BI 08 FS
10 JBX 2 BI 10 MS JBX 2 BI 10 FS
12 JBX 2 BI 12 MS JBX 2 BI 12 FS
16 JBX 2 BI 16 MS JBX 2 BI 16 FS
18 JBX 2 BI 18 MS JBX 2 BI 18 FS
19 JBX 2 BI 19 MS JBX 2 BI 19 FS
03 JBX 3 BI 03 MS JBX 3 BI 03 FS
Insert Part Number
Shell size Insert Pin contacts Socket contacts
00
0
1
2
3
04 JBX 00 BI 04 MPS JBX 00 BI 04 FPS
04 JBX 0 BI 04 MSS JBX 0 BI 04 FSS
05 JBX 0 BI 05 MSS JBX 0 BI 05 FSS
06 JBX 0 BI 06 MPS JBX 0 BI 06 FPS
07 JBX 0 BI 07 MPS JBX 0 BI 07 FPS
07 JBX 1 BI 07 MSS JBX 1 BI 07 FSS
08 JBX 1 BI 08 MSS JBX 1 BI 08 FSS
10 JBX 1 BI 10 MPS JBX 1 BI 10 FPS
12 JBX 2 BI 12 MSS JBX 2 BI 12 FSS
16 JBX 2 BI 16 MSS JBX 2 BI 16 FSS
18 JBX 2 BI 18 MSS JBX 2 BI 18 FSS
19 JBX 2 BI 19 MSS JBX 2 BI 19 FSS
22 JBX 3 BI 22 MSS JBX 3 BI 22 FSS
30 JBX 3 BI 30 MSS JBX 3 BI 30 FSS
04 JBX 3 BI 04 MS JBX 3 BI 04 FS
07 JBX 3 BI 07 MS JBX 3 BI 07 FS
10 JBX 3 BI 10 MS JBX 3 BI 10 FS
14 JBX 3 BI 14 MS JBX 3 BI 14 FS
18 JBX 3 BI 18 MS JBX 3 BI 18 FS
22 JBX 3 BI 22 MS JBX 3 BI 22 FS
30 JBX 3 BI 30 MS JBX 3 BI 30 FS
Insert for pin contacts
Insert for pin contacts
Insert for socket contacts
Insert for socket contacts
Push-Pull connectors
258
Toolings JBX - JKX
• Manual extraction tools
Contacts automatically extracted
The extraction tool is similar for both male and female contacts.
Shell size Ø Contacts
SOURIAU Part number
ASTRO Part number
0.7 JBX OUT DC 07 ATJP 2045
0.9 JBX OUT DC 09 AT
JP
2057
0.7 JBX OUT DC 07 AT
JP
2045
0.9 JBX OUT DC 09 AT
JP
2057
1.3 JBX OUT DC 13 AT
JP
2077
0.7 JBX OUT DC 07 AT
JP
2045
0.9 JBX OUT DC 09 AT
JP
2057
1.3 JBX OUT DC 13 AT
JP
2077
1.6 JBX OUT DC 16 AT
JP
2095
2.0 JBX OUT DC 20 AT
JP
2115
0.7 JBX OUT DC 07 AT
JP
2045
0.9 JBX OUT DC 09 AT
JP
2057
1.3 JBX OUT DC 13 AT
JP
2077
1.6 JBX OUT DC 16 AT
JP
2095
2.0 JBX OUT DC 20 AT
JP
2115
0
1
2
3
The contact is automatically extracted without the need of pulling onto the cable.
Push-Pull connectors
259
Toolings JBX - JKX
• Turret with locator for pin and socket 1.6 mm and 2 mm contacts
• Crimping tool
Male contact Female contact
SOURIAU P/N DANIELS P/N ASTRO P/N SOURIAU P/N DANIELS P/N ASTRO P/N
0.7 22 - 24 - 26 JBX 0 OUT LP07 86 - 223 / JBX 0 OUT LS07 86 - 224 /
0.9 20 - 22 - 24 JBX 0 OUT LP09 86 - 225 / JBX 0 OUT LS09 86 - 226 /
0.7 22 - 24 - 26 JBX 1 OUT LP07 86 - 196 642 - 001 JBX 1 OUT LS07 86 - 197 642 - 004
0.9 20 - 22 - 24 JBX 1 OUT LP09 86 - 198 642 - 002 JBX 1 OUT LS09 86 - 199 642 - 005
1.3 18 - 20 - 22 JBX 1 OUT LP13 86 - 200 642 - 003 JBX 1 OUT LS13 86 - 201 642 - 006
0.7 22 - 24 - 26 JBX 2 OUT LP07 86 - 202 642 - 007 JBX 2 OUT LS07 86 - 203 642 - 010
0.9 20 - 22 - 24 JBX 2 OUT LP09 86 - 204 642 - 008 JBX 2 OUT LS09 86 - 205 642 - 011
1.3 18 - 20 - 22 JBX 2 OUT LP13 86 - 206 642 - 009 JBX 2 OUT LS13 86 - 207 642 - 012
0.7 22 - 24 - 26 JBX 3 OUT LP07 86 - 217 642 - 014 JBX 3 OUT LS07 86 - 214 642 - 017
0.9 20 - 22 - 24 JBX 3 OUT LP09 86 - 218 642 - 015 JBX 3 OUT LS09 86 - 215 642 - 018
1.3 18 - 20 - 22 JBX 3 OUT LP13 86 - 219 642 - 016 JBX 3 OUT LS13 86 - 216 642 - 019
Shell size Ø contacts AWG
0
1
Male and female contacts
SOURIAU P/N DANIELS P/N ASTRO P/N
1.6 14 - 16 - 18 JBX 2 OUT LT16 TH 564 650 - 030
212 - 14 - 16 JBX 2 OUT LT20 TH 565 650 - 031
1.6 14 - 16 - 18 JBX 3 OUT LT16 TH 566 650 - 038
212 - 14 - 16 JBX 3 OUT LT20 TH 567 650 - 035
Shell size Ø contacts AWG
2
3
2
3
Specifications MIL-C-22520 / 7.01
Specifications MIL-C-22520 / 1.01
MIL P/N - SOURIAU P/N Supplier P/N
Contacts 0.7 mm - 0.9 mm MIL-22520/7-01 Daniels : MH860
and 1.3 mm Buchanan : 616 336
MIL P/N - SOURIAU P/N Supplier P/N
Contacts 1.6 mm MIL-22520/1-01 Daniels : AF8
and 2 mm Buchanan : 615 708
• Locator for pin and socket 0.7 - 0.9 mm and 1.3 mm contacts
Custom Connector
and Cable Assemblies
260
Examples of custom designs derivated from standard connectors lines
• Watertight receptacles
• Black conductive plating
• JBX series, Custom Receptacle Design
• JKX series, black chrome plating
Push-Pull connectors
261
Request form please fill in and fax to SOURIAU - Customer service
(see the address page for your local contact)
Name : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel number : . . . . . . . . . . . . . . . . Fax number : . . . . . . . . . . .
Title : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-mail : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Company : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Address : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications :
oMedical oAudio oVideo oInstrumentation oNuclear physics
oGPS oTransportation oMetrology oOther .............................................................
Detailed description of end product, unit or application ……………………………………………………………………………
Connector description :
oSeries : . . . . . . . . . . . . . . . . . . . . . . . . . . o Shell configuration : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oShell size : . . . . . . . . . . . . . . . . . . . . . . oProtective boot : . . . . . . . . . . . . . . . . . . . . . . oColor : . . . . . . . . . . . . . . . .
oNumber of contacts : . . . . . . . . . . . . . . .
oType of contacts : oSolder . . . . . . . . . . oCrimp. . . . . . oPrinted circuit . . . . . . . . . . . o90° printed circuit
oConductor AWG : . . . . . . . . . . . . . . . . . . oCoax type : . . . . . . . . . . . . . . . . . . . . . . . . . oOther : . . . . . . . . . . . . . . .
Electrical :
oWorking voltage (AC/DC) : . . . . . . . . . . . oCurrent rating : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oImpedance (Ohms) : . . . . . . . . . . . . . . . . oSWR : . . . . . . . . . . . . . . . . . . . . . . . . .oFrequency . . . . . . . . . . . . . . . . . .
oContact resistance : . . . . . . . . . . . . . . . . . oShielding : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oFibre optics : oMultimode . . . . . . . . . . . . . . . . . . . . . . . . oMonomode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Environment :
oTemperature : . . . . . . . . . . . . . . . . . . . . . oProtection index (IP -- ) : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oOutside environment :
oClear . . . . . . . . . . . . . . . . oSplash proof . . . . . . . . . . . . . . . . . . . .oSterilization . . . . . . . . . . . . . . . . .
oDirt . . . . . . . . . . . . . . . . . oFluids . . . . . . . . . . . . . . . . . . . . . . . . .oRadiation . . . . . . . . . . . . . . . . . . .
oChemicals . . . . . . . . . . . . oWaterproof . . . . . . . . . . . . . . . . . . . . .oGases . . . . . . . . . . . . . . . . . . . . .
oSalt waterspray. . . . . . . .
Projections :
oPrototype quantity : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Delivery date : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oPreseries quantity : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Delivery date : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oProduction quantity : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Delivery date : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oProduction per year : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . o Number of years : . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oTarget pricing per connector : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Push-Pull connectors
262
Conversion Table
• Millimeters / Inches • °C/°F
(mm) (inches)
0.1 0.00394
0.2 0.00788
0.3 0.01182
0.4 0.01576
0.5 0.01970
0.6 0.02364
0.7 0.02758
0.8 0.03152
0.9 0.03546
1.0 0.03940
1.1 0.04334
1.2 0.04728
1.3 0.05122
1.4 0.05516
1.5 0.05910
1.6 0.06304
1.7 0.06698
1.8 0.07092
1.9 0.07486
2.0 0.07880
2.1 0.08274
2.2 0.08668
2.3 0.09062
2.4 0.09456
2.5 0.09850
2.6 0.10244
2.7 0.10638
2.8 0.11032
2.9 0.11426
3.0 0.11820
3.1 0.12214
3.2 0.12608
3.3 0.13002
3.4 0.13396
3.5 0.13790
3.6 0.14184
3.7 0.14578
3.8 0.14972
3.9 0.15366
4.0 0.15760
4.1 0.16154
4.2 0.16548
4.3 0.16942
4.4 0.17336
4.5 0.17730
4.6 0.18124
4.7 0.18518
4.8 0.18912
4.9 0.19306
5.0 0.19700
5.2 0.20488
5.4 0.21276
5.6 0.22064
5.8 0.22852
6.0 0.23640
6.2 0.24428
6.4 0.25216
6.6 0.26004
6.8 0.26792
7.0 0.27580
7.2 0.28368
7.4 0.29156
7.6 0.29944
7.8 0.30732
8.0 0.31520
(mm) (inches)
8.2 0.32308
8.4 0.33096
8.6 0.33884
8.8 0.34672
9.0 0.35460
9.2 0.36248
9.4 0.37036
9.6 0.37824
9.8 0.38612
10.0 0.39400
10.5 0.41370
11.0 0.43340
11.5 0.45310
12.0 0.47280
12.5 0.49250
13.0 0.51220
13.5 0.53190
14.0 0.55160
14.5 0.57130
15.0 0.59100
15.5 0.61070
16.0 0.63040
16.5 0.65010
17.0 0.66980
17.5 0.68950
18.0 0.70920
18.5 0.72890
19.0 0.74860
19.5 0.76830
20.0 0.78800
20.5 0.80770
21.0 0.82740
21.5 0.84710
22.0 0.86680
22.5 0.88650
23.0 0.90620
23.5 0.92590
24.0 0.94560
24.5 0.96530
25.0 0.98500
25.5 1.00470
26.0 1.02440
26.5 1.04410
27.0 1.06380
27.5 1.08350
28.0 1.10320
28.5 1.12290
29.0 1.14260
29.5 1.16230
30.0 1.18200
30.5 1.20170
31.0 1.22140
31.5 1.24110
32.0 1.26080
32.5 1.28050
33.0 1.30020
33.5 1.31990
34.0 1.33960
34.5 1.35930
35.0 1.37900
35.5 1.39870
36.0 1.41840
36.5 1.43810
37.0 1.45780
37.5 1.47750
(mm) (inches)
38.0 1.49720
38.5 1.51690
39.0 1.53660
39.5 1.55630
40.0 1.57600
40.5 1.59570
41.0 1.61540
41.5 1.63510
42.0 1.65480
42.5 1.67450
43.0 1.69420
43.5 1.71390
44.0 1.73360
44.5 1.75330
45.0 1.77300
45.5 1.79270
46.0 1.81240
46.5 1.83210
47.0 1.85180
47.5 1.87150
48.0 1.89120
48.5 1.91090
49.0 1.93060
49.5 1.95030
50.0 1.97000
51.0 2.00940
52.0 2.04880
53.0 2.08820
54.0 2.12760
55.0 2.16700
56.0 2.20640
57.0 2.24580
58.0 2.28520
59.0 2.32460
60.0 2.36400
61.0 2.40340
62.0 2.44280
63.0 2.48220
64.0 2.52160
65.0 2.56100
66.0 2.60040
67.0 2.63980
68.0 2.67920
69.0 2.71860
70.0 2.75800
71.0 2.79740
72.0 2.83680
73.0 2.87620
74.0 2.91560
75.0 2.95500
80.0 3.15200
85.0 3.34900
90.0 3.54600
100.0 3.94000
200.0 7.88000
400.0 15.76000
600.0 23.64000
800.0 31.52000
1000.0 39.40000
1200.0 47.28000
1600.0 63.04000
2000.0 78.80000
3200.0 126.08000
(°C) (°F)
- 70 - 94
- 65 - 85
- 55 - 67
- 50 - 58
- 40 - 40
032
37 98.6
80 176
125 257
150 302
170 338
200 392
250 482
• Pressure conversion
bar psi mmHg (torr)
10 145.0 7600
5 72.5 3800
2 29.0 1520
1 14.5 760
0.5 7.2 380
0.1 1.4 76
mbar psi torr (mmHg)
100 1.4 76
50 0.72 38
10 0.14 7.6
1.32 0.019 1
