U.S. CAGE Code 06324
Micro-D
Latching
MicroStri ps
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2011 Glenair, Inc. Printed in U.S.A.
Q
Q-13
Series 171 MicroStrips
Single Row Surface Mount Strips
171-008
Single Row Surface Mount MicroStrips
These .050" pitch single row surface mount microstrips are available with 1
to 30 contacts. SMT tails are .013" diameter and are solder dipped in 63/37
tin-lead. Optional latching mechanism provides secure connection. Optional
guide pins provide circuit polarization. Contacts are twistpin type and
are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-
reliability applications where long-term resistance to fretting corrosion is a
necessity. 3 A., 600 Vac, -55C to +150C.
How To Order Surface Mount Strips
Series Number of
Cavities
Contact Type Optional Guide
Pin
Optional Latch Optional
Mounting Holes
171-008
Single Row
MicroStrip, .050"
Contact Spacing,
Surface Mount Tails
-1 to -30
Total number of
cavities including
guide pins,latches
and mounting
holes.
The number of
cavities equals the
number of electrical
circuits plus 1 cavity
for each guide pin
and latch, plus 6
cavities for the
mounting hole option.
P
Pin Contacts
S
Socket Contacts
Omit
For No Guide Pin
-P1
Guide Pin in Cav. #1
-PB
Guide Pin at Both
Ends
-P(X)
Replace (X) with
guide pin location.
P3 shown below:
Omit
For No Latch
CL
Center Latch
BL
Latch at Both Ends
Omit
For No Mounting
Holes
MH
Mounting Holes
The three cavities on
each end are lled
with epoxy. Two .062"
(1.57mm) holes are
cross-drilled to allow
for attachment to a
mounting surface.
171-008 -5 P
171-008-5P
Sample Part Number
U.S. CAGE Code 06324
Micro-D
Latching
MicroStri ps
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2011 Glenair, Inc. Printed in U.S.A.
Q
Q-14
Series 171 MicroStrips
Single Row Surface Mount Strips
171-008
Dimensions
# of
Cavities
(A) B Max. C # of
Cavities
(A) B Max. C
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm.
1- - .085 2.16 N/A N/A 16 .750 19.05 .835 21.21 .650 16.51
2.050 1.27 .135 3.43 N/A N/A 17 .800 20.32 .885 22.48 .700 17.78
3.100 2.54 .185 4.70 N/A N/A 18 .850 21.59 .935 23.75 .750 19.05
4.150 3.81 .235 5.97 N/A N/A 19 .900 22.86 .985 25.02 .800 20.32
5.200 5.08 .285 7.24 N/A N/A 20 .950 24.13 1.035 26.29 .850 21.59
6.250 6.35 .335 8.51 N/A N/A 21 1.000 25.40 1.085 27.56 .900 22.86
7.300 7.62 .385 9.78 .200 5.08 22 1.050 26.67 1.135 28.83 .950 24.13
8.350 8.89 .435 11.05 .250 6.35 23 1.100 27.94 1.185 30.10 1.000 25.4
9.400 10.16 .485 12.32 .300 7.62 24 1.150 29.21 1.235 31.37 1.050 26.67
10 .450 11.43 .535 13.59 .350 8.89 25 1.200 30.48 1.285 32.64 1.100 27.94
11 .500 12.70 .585 14.86 .400 10.16 26 1.250 31.75 1.335 33.91 1.150 29.21
12 .550 13.97 .635 16.13 .450 11.43 27 1.300 33.02 1.385 35.18 1.200 30.48
13 .600 15.24 .685 17.40 .500 12.7 28 1.350 34.29 1.435 36.45 1.250 31.75
14 .650 16.51 .735 18.67 .550 13.97 29 1.400 35.56 1.485 37.72 1.300 33.02
15 .700 17.78 .785 19.94 .600 15.24 30 1.450 36.83 1.535 38.99 1.350 34.29
Center Latch Locations
Even Number of Cavities Odd Number of Cavities
CAVITY 1
PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
Latch placed on next lower cavity prior to centerline.
Latch position = (# of Cavities) ÷ 2.
CAVITY 1
PIN CONNECTOR SOCKET CONNECTOR
CAVITY 1
Latch placed in cavity on centerline.
Latch Position = (# of Cavities+1) ÷ 2.
.075
(1.91)
TYP
.110 (2.79)
MAX
.050 (1.27)
MAX
.050 (1.27)
MAX
.050 (1.27)
TYP
.050 (1.27) TYP
MAX
(A)
(A)
B
C
2Xø.062
(1.57)
2Xø.062 (1.57)
.135/.116
(3.43/2.95) .200 (5.08) REF
C
B
.062 (1.57)
.075 (1.91) TYP
.300 (7.62)
.075 (1.91)
.075 (1.91)
.075 (1.91)
.075 (1.91)
.125 (3.18)
.125 (3.18)
PIN CONNECTOR SOCKET CONNECTOR
CONFIGURATION
TYPICAL SURFACE MOUNT
.045 (1.14)
.090 (2.29)
#28 AWG
