Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Surface Mount Strips 171-008 Single Row Surface Mount MicroStrips These .050" pitch single row surface mount microstrips are available with 1 to 30 contacts. SMT tails are .013" diameter and are solder dipped in 63/37 tin-lead. Optional latching mechanism provides secure connection. Optional guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for highreliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. 171-008-5P How To Order Surface Mount Strips Series Number of Cavities 171-008 -1 to -30 Total number of cavities including guide pins,latches and mounting holes. Single Row MicroStrip, .050" Contact Spacing, Surface Mount Tails The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. Contact Type P Pin Contacts Optional Guide Pin Omit For No Guide Pin -P1 Guide Pin in Cav. #1 Optional Latch Omit For No Latch CL Optional Mounting Holes Omit For No Mounting Holes MH Center Latch Mounting Holes BL The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are cross-drilled to allow for attachment to a mounting surface. S Socket Contacts -PB Guide Pin at Both Ends Latch at Both Ends -P(x) Replace (X) with guide pin location. P3 shown below: Sample Part Number 171-008 (c) 2011 Glenair, Inc. -5 P U.S. CAGE Code 06324 Q Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Q-13 www.glenair.com Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Surface Mount Strips 171-008 PIN CONNECTOR SOCKET CONNECTOR .050 (1.27) TYP .075 (1.91) TYP .075 (1.91) TYP 2Xo.062 (1.57) .050 (1.27) MAX C .050 (1.27) TYP .125 (3.18) .050 (1.27) MAX .300 (7.62) 2Xo.062 (1.57) C .110 (2.79) MAX .125 (3.18) TYPICAL SURFACE MOUNT CONFIGURATION .062 (1.57) .135/.116 (3.43/2.95) .075 (1.91) MAX #28 AWG .075 (1.91) .075 (1.91) .200 (5.08) REF .075 (1.91) .090 (2.29) .045 (1.14) (A) B (A) B Dimensions # of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (A) B Max. C In. mm. In. mm. In. mm. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 .085 .135 .185 .235 .285 .335 .385 .435 .485 .535 .585 .635 .685 .735 .785 2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94 N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600 N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24 # of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (A) B Max. C In. mm. In. mm. In. mm. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83 .835 .885 .935 .985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535 21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99 .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29 Center Latch Locations Even Number of Cavities Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR Q CAVITY 1 PIN CONNECTOR SOCKET CONNECTOR CAVITY 1 CAVITY 1 Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) / 2. (c) 2011 Glenair, Inc. U.S. CAGE Code 06324 CAVITY 1 Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) / 2. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Q-14 www.glenair.com