3MTM Molded Assembly 2 mm x 2 mm 2M Series * Available in multiple sizes * Sockets mate with standard 2 mm x 2 mm headers and plugs * Molded-in strain relief * See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: January 23, 2008 TS-2150-C Sheet 1 of 2 Physical Connector: Technical Specification: TS-0525 for 2 mm x 2 mm Molded-On Socket TS-2151 for 2 mm x 2 mm Molded-On PCB Cable: Technical Specification: TS-0452 for 1mm Flat Ribbon Cable Electrical Voltage Rating: 30 V Environmental Temperature Rating: -20C to +105C UL File No.: E86982 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Molded Assembly 2 mm x 2 mm 2M Series A Length (Dim A) Tolerance B A D C Max. Tol. 1.7 10.0 0.3 10.0 20.0 0.5 20.0 40.0 0.6 40.0 120.0 1.0 120.0 Red Stripe Conductor #1 (near side) Left Connector Min. 2.0 Right Connector Note: A fan-out assembly, with multiple connectors on one end, requires a drawing submittal and review. Available Options Connector/Pos. 6 8 10 Socket x x x PCB x x x 12 x 16 20 22 24 26 30 34 x x x x x x x x x x x 36 x 40 44 50 x x x x x x Cable x x x x x x x x x x x x x x x Cable/Pos. 6 8 10 12 16 20 22 24 26 30 34 36 40 44 50 Note: If "Keying" is required, mark the circuit(s) to key. 1 Left Connector (Odd Row) 49 2 (Even Row) 50 1 Right Connector (Odd Row) 49 2 (Even Row) 50