BZW06- Series
Page <1> 14/05/08 V1.1
Features:
Plastic package.
Exceeds environmental standards of MIL-STD-19500.
600W surge capability at 10 x 1000µs waveform, duty
cycle: 0.01%.
Excellent clamping capability.
Low zener impedance.
Fast response time: typically less than 1.0ps from
0 volts to VBR for unidirectional and 5.0ns for
bidirectional.
Typical IRless than 1µA above 10V.
High temperature soldering guaranteed: 260°C/10
seconds/0.375 Inch (9.5mm) lead length/5lbs. (2.3kg)
tension.
Mechanical Data
Case : Molded plastic.
Lead : Axial leads, solderable per MIL-STD-202, Method 208.
Polarity : Color band denotes cathode except bipolar.
Weight : 0.34 gram.
Dimensions : Inches (Millimetres)
DO-15
BZW06- Series
Page <2> 14/05/08 V1.1
Maximum Ratings and Electrical Characteristics (TA= 25°C)
Type Number Symbol Value Units
Peak Pulse Power Dissipation at TA= 25°C, Tp= 1ms (Note) PPP Minimum 600 Watts
Steady State Power Dissipation at TL= 75°C
Lead Lengths 0.375 Inch 9.5mm PD1.7
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load (JEDEC method) IFSM 100 Amps
Junction to Leads RθJL 60 °C/W
Junction to Ambient on Printed Circuit.
L Lead = 10mm RθJA 100
Operating and Storage Temperature Range TJ, TSTG -65 to + 175 °C
Notes: For a surge greater than the maximum values, the diode will fall in short-circuit.
Ratings and Characteristic Curves
Peak Pulse Power Versus Exponential
Pulse Duration Peak Pulse Power Dissipation Versus Initial Junction
Temperature (Printed Circuit Board)
Pulse Waveform
t, Time, ms
Peak Pulse Current - %
BZW06- Series
Page <3> 14/05/08 V1.1
Clamping Voltage Versus Peak Pulse Current
Exponential Waveform tp-200µµs
tp-1ms
tp-10m
Characterastics Versus Reverse Applied
Voltage for Unidirectional Types
(Typical Values)
CJ, Junction Capacitance. (pF)
BZW06- Series
Page <4> 14/05/08 V1.1
Characterastics Versus Reverse Applied
Voltage for Unidirectional Types
(Typical Values)
Peak Forward Voltage Drop Versus
Peak Forward Current (Typical
Values for Undirectional Types)
Transient Thermal Impedance Junction
Ambient Versus Pulse Duration
(For FR4 PC Board With L Lead = 10mm)
Relative Variation of Leakage Current
Versus Junction Temperature
BZW06- Series
Page <5> 14/05/08 V1.1
Electrical Characteristics (TA= 25°C unless otherwise noted)
Notes: 1. Pulse test: tp <50ms.
2. VBR = αT *(Tamb - 25) *VBR (25°C).
3. VR = 0V, F = 1MHz, For bidirectional types, capacitance value is divided by 2.
Device
IRM at VRM VBR at IRVCL at IPP VCL at IPP ααTC
Maximum Note1 Maximum Maximum Maximum Typical
Minimum Nominal Maximum 10/1000µµs 8/20µµSNote2 Note3
Unidirectional Bidirectional µµAV V V V mA V A V A 10-4/°C (pF)
- BZW06-102B 1 102 114 120 126
1
165 3.6 212 19 10.7 450
BZW06-13 BZW06-13B 5 12.8 14.3 15.0 15.8 21.2 28 27.2 147 8.4 1900
BZW06-15 BZW06-15B
1
15.3 17.1 18.0 18.9 25.2 24 32.5 123 8.8 1600
BZW06-20 BZW06-20B 20.5 22.8 24.0 25.2 33.2 28.0 42.8 93 9.4 1250
BZW06-31 BZW06-31B 30.8 34.2 36.0 37.8 49.9 12.0 64.3 62 9.6 950
BZW06-33 BZW06-33B 33.3 37.1 39.0 41.0 53.9 11.1 69.7 57 10.0 900
For enquiries from all other markets
BZW06- Series
Page <6> 14/05/08 V1.1
Notes:
International Sales Offices:
AUSTRALIA Farnell
Tel No: ++61 1300 361 005
Fax No: ++61 1300 361 225
FRANCE Farnell
Tel No: ++ 33 474 68 99 99
Fax No: ++ 33 474 68 99 90
NORWAY Farnell
Tel No: 800 146 70
Fax No: 800 146 76
AUSTRIA Farnell
Tel No: ++ 43 662 2180 680
Fax No: ++ 43 662 2180 670
GERMANY Farnell
Tel No: ++ 49 89 61 39 39 39
Fax No: ++ 49 89 613 59 01
PORTUGAL Farnell
Tel No: ++ 34 93 475 8804
Fax No: ++ 34 93 474 5288
RUSSIA Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ESTONIA Farnell
Tel No: ++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
NETHERLANDS
Farnell
Tel No: ++ 31 30 241 7373
Fax No: ++ 31 30 241 7333
UK Farnell
Tel No: ++ 44 8701 200 200
Fax No: ++ 44 8701 200 201
SINGAPORE
Farnell-Newark
Tel No: ++ 65 6788 0200
Fax No: ++ 65 6788 0300
HONG KONG
Farnell-Newark
Tel No: ++ 852 2268 9888
Fax No: ++ 852 2268 9899
HUNGARY
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
BELGIUM Farnell
Tel No: ++ 32 3 475 2810
Fax No: ++ 32 3 227 3648
BRAZIL – Farnell-Newark
Tel No: ++ 55 11 4066 9400
Fax No: ++ 55 11 4066 9410
IRELAND Farnell
Tel No: ++ 353 1 830 9277
Fax No: ++ 353 1 830 9016
INDIA
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ISRAEL Farnell
Tel No: ++ 180 937 0015
Fax No: ++ 180 937 0014
SPAIN Farnell
Tel No: 901 20 20 80
Fax No: 901 20 20 90
CHINA Farnell-Newark
Tel No: ++86 10 6238 5152
Fax No: ++86 10 6238 5022
CZECH REPUBLIC
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ITALY Farnell
Tel No: ++ 39 02 93 995 200
Fax No: ++ 39 02 93 995 300
SWEDEN Farnell
Tel No: ++ 46 8 730 50 00
Fax No: ++ 46 8 83 52 62
MALAYSIA
Farnell-Newark
Tel No: ++ 60 3 7873 8000
Fax No: ++ 60 3 7873 7000
SWITZERLAND
Farnell
Tel No: ++ 44 204 64 64
Fax No: ++ 44 204 64 54
DENMARK Farnell
Tel No: ++ 45 44 53 66 44
Fax No: ++ 45 44 53 66 06
UK CPC
++ 44 8701 202 530
++ 44 8701 202 531
USA
Newark
Tel No: 800 463 9275
NEW ZEALAND
Farnell
Tel No: 0800 90 80 80
Fax No: 0800 90 80 81
EXPORT Farnell
Tel No: ++ 44 8701 200 208
Fax No: ++ 44 8701 200 209
export
FINLAND Farnell
Tel No: ++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or ar e licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual pr operty rights is granted. The Information is subject to change without notice and r eplaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk