Bel-Stewart Connector
Cable Ready Hand Tool
Instructions
P/N 2940010-01
MN800007 Rev. A0
Bel-Stewart Connector
11118 Susquehanna Trail South
Glen Rock, PA 17327-9199
(717) 235-7512
“Short-Body”
Crimp Insert
#2940008-01
“CAT5”
Crimp Insert
#2940009-01
“Cable Jack”
Crimp Insert
#2940015-01 ASSEMBLY INSTRUCTIONS
“Cable Ready” Hand Tool #2940010-01 1 2
1. Position “Crimp Insert” as shown, with p/n facing operator.
2. Slide “Insert” over hand tool t-latch till it ‘clicks’ in place.
NOTE: Insert can slide over t-latch incorrectly, but, will not
‘click’ into position. Remove and re-install as shown in view 2.