1N5807US - 1N5811US HIGH RELIABILITY TESTED MECHANICAL DATA Dimensions in mm ULTRA FAST RECOVERY RECTIFIER DIODES 1.1 0.3 PRV : 50 - 150V Io : 6.0A 4.8 0.15 5.4 0.15 1 FEATURES: 2 2.0 0.1 0.22 0.07 2.3 0.2 3.6 0.15 High current capability High surge current capability High reliability Low reverse current Low forward volt drop Ultra fast recovery time RoHS Compliant MECHANICAL DATA: SMB (DO-214AA) Package Pin 1 = Cathode * * * * * * * Pin 2 = Anode * * * * Case: SMB Molded plastic Lead: Lead Formed for Surface Mount Mounting Position: Any Weight 0.1079 gram ABSOLUTE MAXIMUM RATINGS Tamb= 25C unless otherwise specified VRWM 1N5807 1N5809 1N5811 50V 100V 150V Maximum Working Peak Reverse Voltage TLead = 75C 6.0A (1) Tamb = 55C 3.0A (2) IF(AV) Maximum Average Forward Current IFSM Maximum Forward Surge Current Tstg Storage Temperature Range -65 to +175 C TJ Junction Temperature Range -65 to +175 C (3) 125A Notes (1) Measured at 3/8" lead length. Derate at 60mA/C above TLead=75C (2) Derate linearly at 25mA/C above Ta=55C This r ating is typical for PC boards where thermal resistance mounting point to ambient is sufficiently controlled where TJ(max) does not exceed 175C. (3) Ta=25C @ I F(AV =3.0A and VRWM for ten 8.3mS surges at 1minute intervals (JEDEC Method) Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7472, ISSUE 1 1N5807US - 1N5811US HIGH RELIABILITY TESTED Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7472, ISSUE 1 1N5807US - 1N5811US HIGH RELIABILITY TESTED THERMAL CHARACTERISTICS Rth j-lead Thermal resistance to lead Max. Unit 22 C/W ELECTRICAL CHARACTERISTICS V(BR) Parameter Test Conditions Minimum Breakdown Voltage IR = 100 A VF Maximum Forward Voltage IF = 4.0A IR Maximum Reverse Current VR = VRWM trr Maximum Reverse Recovery Time (1) IF = 1.0A IRR = 0.1A Min. Typ. Max. 1N5807 60 1N5809 110 1N5811 160 Unit V 0.875 5.0 Tamb = 100C IR = 1.0A 150.0 30 A nS Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7472, ISSUE 1