1N5807US – 1N5811US
HIGH RELIABILITY TESTED
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be
both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab
encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
DOC 7472, ISSUE 1
MECHANICAL DATA
Dimensions in mm
ABSOLUTE MAXIMUM RATINGS
T
amb
= 25°C unless otherwise specified
1N5807 1N5809 1N5811
V
RWM
Maximum Working Peak Reverse Voltage 50V 100V 150V
T
Lead
= 75°C 6.0A
(1)
I
F(AV)
Maximum Average Forward Current T
amb
= 55°C 3.0A
(2)
I
FSM
Maximum Forward Surge Current
(3)
125A
T
stg
Storage Temperature Range -65 to +175 °C
T
J
Junction Temperature Range -65 to +175 °C
Notes
(1) Measured at 3/8” lead length. Derate at 60mA/°C above TLead=75°C
(2) Derate linearly at 25mA/°C above Ta=55°C This r ating is typical for PC boards where thermal resistance
mounting point to ambient is sufficiently controlled where T
J
(max) does not exceed 175°C.
(3) Ta=25°C @ I
F(AV
=3.0A and V
RWM
for ten 8.3mS surges at 1minute intervals (JEDEC Method)
ULTRA FAST RECOVERY
RECTIFIER DIODES
FEATURES
:
• High current capability
• High surge current capability
• High reliability
• Low reverse current
• Low forward volt drop
• Ultra fast recovery time
• RoHS Compliant
SMB (DO
-
214AA)
Package
Pin 1 = Cathode
Pin 2
= Anode
MECHANICAL DATA:
• Case: SMB Molded plastic
• Lead: Lead Formed for Surface Mount
• Mounting Position: Any
• Weight 0.1079 gram
5.4 ± 0.15
4.8 ± 0.15
1.1 ± 0.3
0.22 ± 0.07
2.3 ± 0.22.0 ± 0.1
3.6 ± 0.15
1
2
PRV : 50 - 150V
I
o
: 6.0A
1N5807US – 1N5811US
HIGH RELIABILITY TESTED
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be
both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab
encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
DOC 7472, ISSUE 1
1N5807US – 1N5811US
HIGH RELIABILITY TESTED
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be
both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab
encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
DOC 7472, ISSUE 1
ELECTRICAL CHARACTERISTICS
Parameter Test Conditions Min.
Typ.
Max.
Unit
V
(BR)
Minimum Breakdown Voltage I
R
= 100 µA 1N5807 60
1N5809 110
1N5811 160
V
F
Maximum Forward Voltage I
F
= 4.0A 0.875
V
5.0
I
R
Maximum Reverse Current V
R
= V
RWM
T
amb
= 100°C 150.0 µA
t
rr
Maximum Reverse Recovery Time
(1)
I
F
= 1.0A I
R
= 1.0A
I
RR
= 0.1A 30 nS
THERMAL CHARACTERISTICS
Max. Unit
R
th
j-lead Thermal resistance to lead 22 °C/W
