1
RF Driver Amplifier
250 - 4000 MHz
Rev. V1
MAAM-009560
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Features
• Output Intercept Point of +42 dBm over a 20 dB
Input Power Range
• Broadband Operation
• Lead-Free SOT-89 Package
• Halogen-Free “Green” Mold Compound
• RoHS* Compliant and 260°C Reflow Compatible
• Class 2 ESD Rating
Description
The MAAM-009560 RF driver amplifier is a GaAs
MMIC which exhibits exceptional linearity
performance over a >20 dB dynamic range, as well
as featuring high gain in a lead-free miniature
SOT-89 surface mount plastic package. The device
is biased with a single +5 volt supply and consumes
225 mA typically.
The MAAM-009560 is fabricated using an HBT
process to realize low current and high linearity. The
process features full passivation for increased
performance and reliability.
Ordering Information 1,2
Part Number Package
MAAM-009560-000000 Bulk Packaging
MAAM-009560-TR3000 3000 piece reel
MAAM-009560-001SMB Sample Board
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
Maximum Operating Conditions 3
Parameter Maximum Operating
Conditions
Junction Temperature4 170 °C
RF Output Power 28 dBm
Operating Temperature -40 °C to +85 °C
Absolute Maximum Ratings 5,6
Parameter Absolute Maximum
RF Output Power 29 dBm
Voltage 6 volts
Storage Temperature -65 °C to +150 °C
Junction Temperature 210 °C
Pin Configuration
Pin No. Function Pin No. Function
1 RF Input 3 RF Output/Bias
2 Ground
Functional Schematic
RF In RF Out
Pin 1
RF In RF Out / Bias
Pin 1
RF In RF Out
Pin 1
RF In RF Out / Bias
Pin 1
3. These operating conditions will ensure MTTF > 1 x 106 hours.
4. Junction Temperature (TJ) = TA + Өjc * ((V * I) - (POUT - PIN))
Typical thermal resistance (Өjc) = 47° C/W
a) For TA = 25°C,
TJ = 73 °C @ 5 V, 225 mA, POUT = 20 dBm, PIN = 5 dBm
b) For TA = 85°C,
TJ = 123 °C @ 5 V, 180 mA, POUT = 20 dBm, PIN = 5.5 dBm
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
2
RF Driver Amplifier
250 - 4000 MHz
Rev. V1
MAAM-009560
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Electrical Specifications: Freq. = 2140 MHz, TA = 25°C, VCC = +5 V, Z0 = 50 Ω
2140 MHz PCB Layout
2140 Schematic
Parts List
The PCB dielectric between RF traces and RF ground layers
should be chosen to reduce RF discontinuities between 50 Ω
lines and package pins. M/A-COM recommends an FR-4
dielectric thickness of 0.008” (0.20 mm) yielding a 50 Ω line
width of 0.015” (0.38 mm). The recommended RF
metalization is 1 ounce copper.
Part Value Case Style
C1 1.8 pF 0402
C2 2.2 pF 0402
C3 0.1 µF 0402
C4 1000 pF 0402
C5 39 pF 0402
C6 1 pF 0402
C7 2 pF 0402
L1 3.6 nH 0402
R1, R2 0 Ω 0402
Cross Section View
Parameter Units Min. Typ. Max.
Gain dB 14 15 —
Noise Figure dB — 3 —
Input Return Loss dB — 15 —
Output Return Loss dB — 17 —
Output P1dB dBm — 28.5 —
Output IP3 dBm 40 42 —
Quiescent Current mA — 220 —
Current (PIN = 0 dBm) mA — 225 325
3
RF Driver Amplifier
250 - 4000 MHz
Rev. V1
MAAM-009560
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Typical Performance Curves, 2140 MHz Configuration
Input Return Loss
Output Return Loss Noise Figure
P1dB Output IP3
Gain
-50
-40
-30
-20
-10
0
2.10 2.12 2.14 2.16 2.18 2.20
+25°C
-40°C
+85°C
Frequency (GHz)
0
5
10
15
20
25
2.10 2.12 2.14 2.16 2.18 2.20
+25°C
-40°C
+85°C
Frequency (GHz)
-50
-40
-30
-20
-10
0
2.10 2.12 2.14 2.16 2.18 2.20
+25°C
-40°C
+85°C
Frequency (GHz)
0
5
10
15
20
25
30
0 5 10 15 20 25 30
+25°C
-40°C
+85°C
Output Power (dBm)
0
1
2
3
4
5
6
2.10 2.12 2.14 2.16 2.18 2.20
Frequency (GHz)
0
10
20
30
40
50
60
0 5 10 15 20 25 30
Output Power / Tone (dBm)
4
RF Driver Amplifier
250 - 4000 MHz
Rev. V1
MAAM-009560
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Lead-Free SOT-89 Plastic Package†
† Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
class 2 devices.
Typical Performance Curves, 2140 MHz Configuration
Current
0
50
100
150
200
250
300
350
0 5 10 15 20 25 30
Output Power (dBm)
