To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
MOS FIELD EFFECT TRANSISTOR
2SK2487
SWITCHING
N-CHANNEL POWER MOS FET
Document No. D10283EJ3V0DS00 (3rd edition)
Date Published November 2006 N CP(K)
Printed in Japan The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what." field.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
DATA SHEET
DESCRIPTION
The 2SK2487 is N-Channel MOS Field Effect Transistors designed for high voltage switching applications.
FEATURES
Low on-state resistance
RDS (on) = 1.6 MAX. (VGS = 10 V, ID = 4.0 A)
Low input capacitance
Ciss = 2 100 pF TYP.
High Avalanche Capability Ratings
ABSOLUTE MAXIMUM RATINGS (TA = 25 ˚C)
Drain to Source Voltage (VGS = 0 V) VDSS 900 V
Gate to Source Voltage (VDS = 0 V) VGSS ±30 V
Drain Current (DC) ID (DC) ±8.0 A
Drain Current (pulse)*ID (pulse) ±20 A
Total Power Dissipation (Tc = 25 ˚C) PT1 140 W
Total Power Dissipation (TA = 25 ˚C) PT2 3.0 W
Channel Temperature Tch 150 ˚C
Storage Temperature Tstg –55 to +150 ˚C
Single Avalanche Current** IAS 8.0 A
Single Avalanche Energy** EAS 264 mJ
*PW 10
µ
s, Duty Cycle 1 %
** Starting Tch = 25 ˚C, RG = 25 , VGS = 20 V 0
2SK2487
2Data Sheet D10283EJ3V0DS
Test Circuit 3 Gate Charge
VGS = 20 - 0 V
PG
RG = 25
50
D.U.T.
L
VDD
Test Circuit 1 Avalanche Capability
PG. RG = 10
D.U.T.
RL
VDD
Test Circuit 2 Switching Time
RG
PG.
IG = 2 mA
50
D.U.T.
RL
VDD
ID
VDD
IAS VDS
BVDSS
Starting Tch
VGS
0
t = 1 us
Duty Cycle 1 %
V
GS
Wave Form
I
D
Wave Form
V
GS
I
D
10 %
10 %
0
0
90 %
90 %
90 %
10 %
V
GS (on)
I
D
t
on
t
off
t
d (on)
t
r
t
d (off)
t
f
t
ELECTRICAL CHARACTERISTICS (TA = 25 ˚C)
CHARACTERISTIC SYMBOL MIN. TYP. MAX. TEST CONDITIONS
Drain to Source On-Resistance RDS (on) 1.1 1.6 VGS = 10 V, ID = 4.0 A
Gate to Source Cutoff Voltage VGS (off) 2.5 3.5 VDS = 10 V, ID = 1 mA
Forward Transfer Admittance | yfs | 3.0 VDS = 20 V, ID = 4.0 A
Drain Leakage Current IDSS 100 VDS = VDSS, VGS = 0
Gate to Source Leakage Current IGSS ±100 VGS = ±30 V, VDS = 0
Input Capacitance Ciss 2100 VDS = 10 V
Output Capacitance Coss 310 VGS = 0
Reverse Transfer Capacitance Crss 60 f = 1 MHz
Turn-On Delay Time td (on) 30 ID = 4.0 A
Rise Time tr20 VGS = 10 V
Turn-Off Delay Time td (off) 130 VDD = 150 V
Fall Time tf23 RG = 10
Total Gate Charge QG65 ID = 8.0 A
Gate to Source Charge QGS 11 VDD = 450 V
Gate to Drain Charge QGD 29 VGS = 10 V
Body Diode Forward Voltage VF (S-D) 1.0 IF = 8.0 A, VGS = 0
Reverse Recovery Time trr 770 IF = 8.0 A, VGS = 0
Reverse Recovery Charge Qrr 5.0 di/dt = 50 A/
µ
s
UNIT
V
S
µ
A
nA
pF
pF
pF
ns
ns
ns
ns
nC
nC
nC
V
ns
µ
C
2SK2487
3
Data Sheet D10283EJ3V0DS
TYPICAL CHARACTERISTICS (TA = 25 °C)
FORWARD BIAS SAFE OPERATING AREA
V
DS
- Drain to Source Voltage - V
I
D
- Drain Current - A
DRAIN CURRENT vs.
DRAIN TO SOURCE VOLTAGE
V
DS
- Drain to Source Voltage - V
I
D
- Drain Current - A
FORWARD TRANSFER CHARACTERISTICS
V
GS
- Gate to Source Voltage - V
I
D
- Drain Current - A
0.1
TOTAL POWER DISSIPATION vs.
CASE TEMPERATURE
T
C
- Case Temperature - ˚C
P
T
- Total Power Dissipation - W
020 40 60 80 100 120 140 160
140
120
100
80
60
40
20
0.1
1
1
10
100
10 100 1 000
T
C
= 25 ˚C
Single Pulse
020 30 40
10
1.0
10
100 Pulsed
20
10
0
Pulsed
51015
R
DS(on)
Limited
Power Dissipation Limited
I
D(DC)
I
D(pulse)
PW = 100 s
µ
1 ms
10 ms
T
A
= –25 ˚C
25 ˚C
75 ˚C
125 ˚C
DERATING FACTOR OF FORWARD BIAS
SAFE OPERATING AREA
T
C
- Case Temperature - ˚C
dT - Percentage of Rated Power - %
020 40 60 80 100 120 140 160
20
40
60
80
100
T
A
= –25 ˚C
25 ˚C
75 ˚C
125 ˚C
2SK2487
4Data Sheet D10283EJ3V0DS
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH
PW - Pulse Width - s
rth(t) - Transient Thermal Resistance - ˚C/W
FORWARD TRANSFER ADMITTANCE vs.
DRAIN CURRENT
ID - Drain Current - A
| yfs | - Forward Transfer Admittance - S
DRAIN TO SOURCE ON-STATE RESISTANCE vs.
GATE TO SOURCE VOLTAGE
VGS - Gate to Source Voltage - V
RDS(on) - Drain to Source On-State Resistance -
010
DRAIN TO SOURCE ON-STATE
RESISTANCE vs. DRAIN CURRENT GATE TO SOURCE CUTOFF VOLTAGE vs.
CHANNEL TEMPERATURE
Tch - Channel Temperature - ˚C
VGS(off) - Gate to Source Cutoff Voltage - V
ID - Drain Current - A
RDS(on) - Drain to Source On-State Resistance -
0.5
1.0
10
0.001
0.01
0.1
1
100
1 000
1 m 10 m 100 m 1 10 100 1 000 10
VDS = 20 V
Pulsed
10.1
1
10
100
10 100
1.0
20 30
Pulsed
1.0
10 100
Pulsed
VGS = 10 V
0
4
VDS = 10 V
ID = 1 mA
–50 050100 150
0
1
Single Pulse
Tc = 25 ˚C
2.0
Rth(ch-a) = 41.7(˚C/W)
Rth(ch-c) = 0.89(˚C/W)
3
2
1
1.5
µ
100
µ
TA
= –25 ˚C
25 ˚C
75 ˚C
125 ˚C ID = 8 A
4 A
1.6 A
2SK2487
5
Data Sheet D10283EJ3V0DS
DRAIN TO SOURCE ON-STATE RESISTANCE vs.
CHANNEL TEMPERATURE
T
ch
- Channel Temperature - ˚C
R
DS(on)
- Drain to Source On-State Resistance -
SOURCE TO DRAIN DIODE
FORWARD VOLTAGE
V
SD
- Source to Drain Voltage - V
I
SD
- Diode Forward Current - A
CAPACITANCE vs. DRAIN TO
SOURCE VOLTAGE
V
DS
- Drain to Source Voltage - V
C
iss
, C
oss
, C
rss
- Capacitance - pF
SWITCHING CHARACTERISTICS
I
D
- Drain Current - A
t
d(on)
, t
r
, t
d(off)
, t
f
- Switching Time - ns
1.0
0.1
0
–50
1.0
050 100 150
V
GS
= 10 V
I
D
= 4 A
0.1
0
1
10
100
0.5
Pulsed
10
1.0
100
1 000
10 000
10 100 1 000
V
GS
= 0
f = 1 MHz
10
100
1 000
1.0 10 100
V
GS
- Gate to Source Voltage - V
REVERSE RECOVERY TIME vs.
DRAIN CURRENT
I
D
- Drain Current - A
t
rr
- Reverse Recovery time - ns
di/dt = 50 A/ s
V
GS
= 0
µ
10
0.1
100
1 000
1.0 10 100
1.0 1.5
V
DD
= 150 V
V
GS
= 10 V
R
G
= 10
DYNAMIC INPUT/OUTPUT CHARACTERISTICS
Q
g
- Gate Charge - nC
V
DS
- Drain to Source Voltage - V
020 40 60 80
200
400
600
800
2
4
6
8
10
12
14
16
0
2.0
3.0
4.0
C
iss
C
rss
C
oss
V
DD
= 450 V
300 V
150 V
V
GS
V
DS
t
r
t
d(on)
t
f
t
d(off)
V
GS
= 10 V
V
GS
= 0V
10 000
2SK2487
6Data Sheet D10283EJ3V0DS
SINGLE AVALANCHE CURRENT vs.
INDUCTIVE LOAD
L - Inductive Load - H
I
AS
- Single Avalanche Current - A
SINGLE AVALANCHE ENERGY
DERATING FACTOR
Starting T
ch
- Starting Channel Temperature - ˚C
Energy Derating Factor - %
1.0
0
25
10
100
µ
1 m 1 m 10 m
V
DD
= 150 V
V
GS
= 20 V 0
R
G
= 25
20
80
120
160
50 75 100 125 150
100
60
40
140
I
AS
= 8 A
E
AS
= 264 mJ
100
V
DD
= 150 V
R
G
= 25
V
GS
= 20 V 0
I
AS
8.0 A
<
_
2SK2487
7
Data Sheet D10283EJ3V0DS
PACKAGE DRAWING (Unit: mm)
TO-3P (MP-88)
15.7 MAX. 3.2±0.2
4.5±0.2
5.0 TYP. 1.0 TYP.
3.0±0.25
20.0±0.25
19 MIN.
2.2±0.2
5.45 TYP.5.45 TYP.
1.0±0.2
4.7 MAX.
1.5 TYP.
6.0 TYP.
2.8±0.10.6±0.1
123
4
φ
1.Gate
2.Drain
3.Source
4.Fin (Drain)
<R>
Body
Diode
Source
Drain
Gate
EQUIVALENT CIRCUIT
Remark Strong electric field, when exposed to this device, can cause destruction of the gate oxide and ultimately
degrade the device operation. Steps must be taken to stop generation of static electricity as much as
possible, and quickly dissipate it once, when it has occurred.
2SK2487
The information in this document is current as of November, 2006. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer’s equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics’ willingness to support a given application.
(Note)
M8E 02. 11-1
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":