ZUP SERIES Programmable CVCC 200W 800W 19Model ks F A ph 3 800W 200W, 400W pf-a F Constant Voltage/Constant Current Built-in RS232 & RS485 Interface hk-a An embedded Microprocessor controller Digital Encoder Knob Software Calibration Last Setting Memory hws Parallel Operation (Master/Slave) Active Current Sharing External Voltage or Resistance Programming Voltage up to 120V, Current up to 132A Active Power Factor Correction: 99% 85265Vac Universal Input Voltage 19" Rack Mounted ATE and OEM Worldwide Safety Agency Approvals CE Mark for LVD and alpha EMC Regulation Serial Link Cable W. Cable included BLANK: None Output Output Voltage Current ( 0 36V ) ( 0 12A ) AC Cable E. Europe U. USA O. Unterminated I: SI 32 std. BLANK: None Front Panel L. Output Jacks BLANK: Standard Applications F A Conformity to RoHS Directive This means that, in conformity with EU Directive 2002/95/ F A EC, lead, cadmium, mercury, hexavalent chromium, and have not been used, except for exempted applications. 200W fps Series name dlp Output Current 0-33A 0-20A 0-10A 0-6A 0-3.5A 0-2.5A 0-1.8A A Model naming method ZUP 36 - 12 / specific bromine-based flame retardants, PBB and PBDE, Product Line up Output Voltage 0-6V 0-10V 0-20V 0-36V 0-60V 0-80V 0-120V warranty Features Y E A R S Model ZUP6-33 ZUP10-20 ZUP20-10 ZUP36-6 ZUP60-3.5 ZUP80-2.5 ZUP120-1.8 All specifications are subject to change without notice. F A 400W Output Current 0-66A 0-40A 0-20A 0-12A 0-7A 0-5A 0-3.6A Model ZUP6-66 ZUP10-40 ZUP20-20 F A ZUP36-12 ZUP60-7 ZUP80-5 ZUP120-3.6 800W Output Current 0-132A 0-80A 0-40A 0-24A 0-14A Model ZUP6-132 ZUP10-80 ZUP20-40 ZUP36-24 ZUP60-14 ZUP A-341 ZUP SERIES ZUP Specifications ITEMS/UNITS MODEL OUTPUT VOLTAGE (*1) OUTPUT CURRENT (*2) RATED OUTPUT POWER LOAD REGULATION LINE REGULATION RMS RIPPLE (5Hz-1MHz Bandwidth) RIPPLE (pk to pk) (20MHz Bandwidth) (*3) CONSTANT RECOVERY TIME VOLTAGE TEMPERATURE COEFFICIENT TEMPERATURE DRIFT UP PROGRAMMING RESPONSE TIME (*4) DOWN PROGRAMMING FULL LOAD RESPONSE TIME NO LOAD LOAD REGULATION (*5) LINE REGULATION (*6) CONSTANT RMS RIPPLE (5Hz-1MHz Bandwidth) CURRENT TEMPERATURE COEFICIENT TEMPERATURE DRIFT (*8) RESOLUTION ACCURACY PROGRAM VOLTAGE MING (*9) RESOLUTION CURRENT ACCURACY OVERVOLTAGE PROTECTION (*10) HOLD-UP TIME VOLTAGE DISPLAY CURRENT STATUS OUTPUT PROTECTIONS INPUT VOLTAGE (*11) INPUT CURRENT (*12) INRUSH CURRENT ( 100/200V ) INPUT EFFICIENCY ( *12 ) INPUT CURRENT HARMONICS POWER FACTOR (TYP) OPERATING TEMPERATURE OPERATING HUMIDITY ENVIRONMENT STORAGE TEMPERATURE STORAGE HUMIDITY VIBRATION SHOCK MECHANICAL WEIGHT SIZE (W x H x D) OUTPUT ON/OFF OUTPUT GOOD EXTERNAL OUTPUT VOLTAGE PROGRAMMING CONTROL OUTPUT CURRENT PROGRAMMING FUNCTIONS REMOTE SENSING COMMUNICATION INTERFACE SAFETY STANDARDS APPROVALS EMC STANDARDS CONDUCTED EMI RADIATED EMI SERIES OPERATION PARALLEL OPERATION COOLING WITHSTAND VOLTAGE ISOLATION RESISTANCE ZUP V A W mV mV mS mS mS mS mA V A A % Kg mm ZUP6-33 ZUP6-66 ZUP6-132 ZUP10-20 ZUP10-40 ZUP10-80 ZUP20-10 0-6 0-10 0-66 0-132 0-20 0-40 0-80 0-10 396 792 200 400 800 200 0.005%+2mV From No load to Full load, constant input voltage. 0.005%+1mV From 85-132VAC or 170-265VAC, constant load. 5 5 8 5 5 8 5 50 50 100 50 50 90 50 1 0.5 30ppm/...C from rated voltage following 30-minute warm-up. 0.01%+2mV Change in output over 8-hour interval under constant line, load and ambient temp following30-minute warm-up. 50 50 60 50 50 60 50 50 50 50 50 50 50 50 250 350 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 50 100 200 25 50 100 15 100ppm/ ...C from rated current following 30-minute warm-up. 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA Better than 0.028% of rated output voltage 0.02%+5mV 0.02%+8mV Better than 0.03% of rated output current 0.4%+40mA 0-7.5 0-13 20mS At 100V/200VAC, rated output voltage and output current. 3 digits ( 6v; 20v; 36v; 60v; 80v); 3.5 digits ( 10v; 120v ) accuracy: 0.2% +/- 2 digits. 3.5 digits (132A); All others 3 digits, accuracy: 0.5% +/- 3 digits. CV/CC, Alarm, Fold, Local/Remote, On/Off. Over Voltage, Over Temperature, Foldback. 85-265Vac Continuous, 47-63Hz 3.0/1.5 5.6/2.7 11.2/5.4 2.9/1.4 5.6/2.7 11.2/5.4 2.9/1.4 15/30 (*7) 15 30 15/30 (*7) 15 30 15/30 (*7) 69/72 74/77 74/77 73/77 79/82 77/81 74/78 Complies with EN61000-3-2, Class A 0.99 at 100/200Vac, 100% load. 0 to 50 ...C ; 100% Load. 30-90% RH ( No dewdrop ). -20 to 70 ...C 10 - 95% RH (No dewdrop). 10-55Hz, Amplitude (sweep 1 min ) 2G, X, Y, Z, When mounted with mounting screws. Less than 20G 2.9 3.2 5.8 2.9 3.2 5.8 2.9 200W and 400W units: 70 x 124 x 350. 800W units: 140 x 124 x 350 (Refer to outline drawing) By TTL Signal or Dry Contact (Refer to instruction manual). Open collector (Refer to instruction manual). By Voltage ( 0-4V ) or by Resistance ( 0-4K ) (Refer to instruction manual). By Voltage ( 0-4V ) or by Resistance ( 0-4K ) (Refer to instruction manual). Maximum 0.5V drop on each load wire for model up to 60V and 2V for the 80V, 120V models RS232 and RS485 Built-in, IEEE488 Optional. UL3111-1, EN61010-1 EN61326-1, IEC 61326-1, FCC part 15 (class A). EN55022-B, FCC-B, VCCI-2 EN55022-A, FCC-A, VCCI-1 Up to 2 units (Refer to instruction manual). Master - Slave method; up to 5 units (Refer to instruction manual). Forced air by blower fan (Blower fan is mounted within unit). Input - Chassis...2.0kVAC 1 min, Input - Output...3.0kVac 1 min, Output - GND...500VAC 1 min. More than 100MOhm at 25 ...C and 70% R.H. 0-33 198 (*1) Minimum voltage is guaranteed to maximum 0.2% of the rated output voltage. (*8) Change in output over 8 hour interval constant line, load and ambient temperature following 30-minutes warm-up. (*2) Minimum current is guaranteed to maximum 0.4% of the rated output current. (*9) Given for control of the output via the serial communication or via front panel controls. (*3) Time for recovery to within +/-50mV against current change of 50% to 100%. (*10) Inverter shut down method, manual reset (OVP will shut down output) (*4) From zero volts to full scale , resistive load and current setting at maximum. (*11) For cases where conformance to various safety specs. (UL, IEC, etc.) are required, to be described as 100-240VAC (50/60Hz) on name plate. (*5) From no load to full load , constant input voltage. (Measure with JEITA RC-9131 probe.) (*6) From 85~132Vac or 170~265Vac constant load. (*12) At 100V/200V and Maximum Output Power. - When forced air cooling, refer to derating curve. (*7) At cold start Ta=25 ...C. A-342 All specifications are subject to change without notice. ZUP SERIES ZUP20-20 ZUP20-40 ZUP36-6 ZUP36-12 ZUP36-24 ZUP60-3.5 ZUP60-7 ZUP60-14 ZUP80-2.5 ZUP80-5 ZUP120-1.8 ZUP120-3.6 0-20 0-20 400 0-40 800 0-6 216 5 50 5 80 5 50 0.2 0-36 0-12 432 5 50 0.2 0-24 864 0-3.5 210 5 70 5 50 0-60 0-7 420 5 50 0.2 0-80 0-14 80 0-2.5 200 5 60 20 70 0-120 0-5 0-1.8 400 216 0.005%+4mV 0.005%+2mV 20 20 70 80 0.2 0-3.6 432 20 80 0.2 400 500 750 800 1000 50 60 50 50 60 50 50 60 100 100 100 100 50 50 50 50 50 50 50 70 60 60 80 80 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.01%+5mA 0.01%+5mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+2mA 0.01%+2mA 30 60 7.5 15 30 5 10 20 5 5 5 5 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.02%+5mA 0.02%+5mA 0.02%+12mV 0.02%+20mV 0.02%+35mV 0.02%+50mV 0.02%+80mV 0-24 0-40 0-66 0-88 0-132 5.6/2.7 15 79/83 11.2/5.4 30 79/82 2.9/1.4 15/30 (*7) 76/80 5.6/2.7 15 80/84 11.2/5.4 30 80/84 2.9/1.4 15/30 (*7) 75/79 5.6/2.7 15 80/84 11.2/5.4 30 80/84 2.6/1.3 15/30 (*7) 78/82 4.9/2.4 15 83/87 2.9/1.4 15/30 (*7) 78/82 5.3/2.6 15 82/86 3.2 5.8 2.9 3.2 5.8 2.9 3.2 5.8 2.9 3.2 2.9 3.2 ZUP All specifications are subject to change without notice. A-343 ZUP SERIES Outline Drawing Note 1 External Control Note 1 Note 1 Connector External External Control Control 19.0 ConnectorConnector [ZUP 200W/400W Units] 11.0 11.0 Note 1 External Control Connector 131.0 1.0 131.0 1.0 11.0 19.0 19.0 131.0131.0 1.0 1.0 11.0 19.0 20.0 0.5 B Note: 1: Housing AMP: 87631-9 with pins AMP: 87523-6. 2: Header PHOENIX: PSC 1,5/3-M-PE Plug PHOENIX: PSC 1,5/3-3-F Plastic cable housing Included with the power supply. B B 59.5 59.559.5 20.0 20.0 20.0 B B B 48.4 0.5 B 48.4 0.5 B B 48.4 48.4 0.5 0.5 WEIGHT: Kg 200W units:2.9 400W units:3.2 0.5 0.5 B B B Mounting Mounting Holes Holes Tap M4xx44 marked marked A A Tap M4 Mounting Mounting Holes Holes Tap M4 x 4Tap marked M4 x 4 A marked A B 13.0 0.5 B 13.0 unit: mm 70x124x350 13.0 13.0 IEC320 RS232/RS485 AC Inlet communication 20.0 20.0 connectorsIEC320 IEC320 RS232/RS485 RS232/RS485 20.0 IEC320 AC Inlet AC Inlet RS232/RS485 communication communication AC Inlet communication connectors connectors connectors 59.5 20.0 B Rear Panel Output Voltage B Rubber Bumpers Rubber Bumpers 4 places B 4 places markedmarked B (removable) (removable) Rubber Bumpers Rubber Bumpers 4 places marked 4 places B marked B (removable) (removable) Connector For 80V, 120V Models. [ZUP 800W Unit] REMOVABLE HANDLE Note 1 External Control Connector Note REMOVABLE HANDLE REM ADDR OVP/UVP OUT 20.0 V/A FOLD REM WEIGHT: POWER 5.899.6 kg 1 OUT POWER 131.0 1.0 139.5 1.0 OUT 99.6 1 unit: 140x124x350 mmPOWER 20.0 OUT REM 139.5139.5 1.0 1.0 131.0131.0 1.0 1.0 FOLD REM FOLD 131.0 1.0 V/A FOLD V/A 139.5 1.0 OVP/UVP V/A 124.0124.0 0.5 0.5 ADDR OVP/UVP 124.0 0.5 ADDR OVP/UVP 124.0 0.5 REMOVABLE REMOVABLE HANDLE HANDLE ADDR 47.0 1 External Control Note 1 Note 1 Connector External External Control Control 47.0 Connector Connector RS232/RS485 communication connectors 46.3 47.0 46.3 47.0 46.3 46.3 IEC320 AC Inlet POWER RS232/RS485 communication connectors RS232/RS485 RS232/RS485 IEC320 communication communication AC Inlet connectors connectors 20.0 99.6 1 99.6 1 Note: 1: Housing AMP: 87631-9 with pins AMP: 87523-6. Included with the power supply. IEC320 AC Inlet IEC320 AC Inlet Mounting Holes: Tap M4 x 4 marked A Rubber Bumpers: 4 places marked B (removable) ZUP Mounting Holes: Tap M4 x 4 marked A Rubber Bumpers: 4 places marked B (removable) Rubber Bumpers: Rubber Bumpers: 4 places marked 4 placesBmarked (removable) B (removable) A-344 Mounting Mounting Holes: TapHoles: M4 x 4Tap marked M4 x 4 A marked A l All specifications are subject to change without notice. ZUP SERIES Accessories / optional items (refer to the attached diagram for appearance) Accessories 1. AC Cord Sets Three optional cords are possible according to order: Region AC Cord Power Supply Connector Wall Plug P/N ZUP / J Europe 10A / 250Vac L =2m IEC320-C13 INT'L 7 / VII ZUP / E ZUP / O North America Europe Sl-32 Standard 2. Communication Cable RS232/RS485 cable is used to connect the power supply to the PC controller Mode PC connector Communication cable Power Supply Connector P/N RS232 DB-9 Shield Ground , L=1m EIA / TIA-568A (RJ-45) ZUP/NC401 RS232 DB-25 Shield Ground , L=1m EIA / TIA-568A (RJ-45) ZUP/NC403 DB-25 (female connector) DB-9 (female connector) EIA/TIA (RJ-45) 3. ZUP serial link cable Used to chain Power Supply to Power Supply from a serial communication bus Mode Communication cable Power Supply Connector Remote IN / OUT P/N RS485 Shield Ground , L = 50cm EIA / TIA-568A (RJ-45) ZUP / W ZUP l All specifications are subject to change without notice. A-345 ZUP SERIES Options ( 200W, 400W, 800W Models ) 1. FRONT PANEL OUTPUT JACKS P/N: ZUP / L Outline Drawing: Physical Dimensions in mm. ZUP 200W/400W Units: 70x153x405.9 ZUP 800W Units: 140x153x405.9 Up to 20A output current via front panel jacks. 2. ZUP ASSEMBLIES Dual Output Packing 200W/400W models P/N: ZUP/NL200 3. 19" RACK MOUNTED ATE AND OEM UP TO 2.4 KW Up to six power units can be assembled into a 19 , 3U rack, kit P/N NL100. In cases where the entire rack is not occupied with power units, NL101 blank panels can be installed. P/N: ZUP/NL100 ZUP A-346 l All specifications are subject to change without notice. ZUP SERIES Application examples ZUP Configurations BENCH TOP POWER SUPPLY Single Parallel (Master / Slave) PARALLEL OPERATION Master - Slave method: Active current sharing up to 5 units. REMOTE PROGRAMMING VIA RS232 Up to 31 ZUP units can be controlled via RS232 interface. Linking ZUP units with RS232 control. REMOTE PROGRAMMING VIA RS485 Up to 31 ZUP units can be controlled via RS485interface. For operation environments that require high noise immunity or long distance communication, it is recommended to use the built- in RS485interface. Linking ZUP units with RS485 control. Remote Programming Via GPIB. GPIBDRS485 CONTROLLER The GP485 is a high performance serial to GPIB Interface It enables a ZUP series with RS485 port to be a Talker, Listener, or controller on the GPIB * Controls up to 31 ZUP units through a single GPIB address. * Conforms to all versions of the IEEE488 standard, including IEEE488.2. * 19 racking possibility. * Application software LabView, LabWindows. l All specifications are subject to change without notice. ZUP A-347 ZUP SERIES Rack Mounted ATE and OEM up to 2.4KW Six units can be assembled into 19-inch rack / 3U high to meet your configuration requirements Power Modules Table 200W 400W 800W 0 ~ 6V Module Type 33A 66A 132A 0 ~ 10V 20A 40A 80A 0 ~ 20V 10A 20A 40A 0 ~ 36V 6A 12A 24A 0 ~ 60V 3.5A 7A 14A 0 ~ 80V 2.5A 5A 0 ~ 120V 1.8A 3.6A 1 / 6 width 1 / 6 width 19"rack width 2 / 6 width ZUP A-348 l All specifications are subject to change without notice. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TDK-Lambda: ZUP/NC404