A-341
ZUP
・All specifications are subject to change without notice.
ProgrammableCVCC200W 〜 800W　19Model
■ProductLineup
800W
200W, 400W
■Features
● Constant Voltage/Constant Current
● Built-in RS232 & RS485 Interface
● An embedded Microprocessor controller
● Digital Encoder Knob
● Software Calibration
● Last Setting Memory
● Parallel Operation (Master/Slave) Active Current
Sharing
● External Voltage or Resistance Programming
● Voltage up to 120V, Current up to 132A
● Active Power Factor Correction: 99%
● 85〜265Vac Universal Input Voltage
● 19" Rack Mounted ATE and OEM
● Worldwide Safety Agency Approvals
● CE Mark for LVD and EMC Regulation
Y
E
A
R
S
warranty
3
■Modelnamingmethod
　ZUP36-12/
AC Cable
E. Europe
U. USA
O. Unterminated
I: SI 32 std.
BLANK: None
Series name
Output
Voltage
( 0 〜 36V )
Output
Current
( 0 〜 12A )
Front Panel
L. Output Jacks
BLANK: Standard
Serial Link Cable
W. Cable included
BLANK: None
■Applications
医 療 計 測 F A 半導体 その他
その他
ks
その他
ph
pf-a
hk-a
hws
alpha
dlp
fps
フォーマット
コンピュータ
通 信 F A 半導体
その他
コンピュータ
通 信 医 療 計 測 F A 半導体
その他
コンピュータ
通 信 医 療 計 測 F A 半導体
その他
コンピュータ
通 信 医 療 計 測 F A 半導体
その他
コンピュータ
通 信 医 療 計 測 F A 半導体
その他
This means that, in conformity with EU Directive 2002/95/
EC, lead, cadmium, mercury, hexavalent chromium, and
specic bromine-based ame retardants, PBB and PBDE,
have not been used, except for exempted applications.
■
ConformitytoRoHSDirective
200W 400W 800W
Output Voltage Output Current Model Output Current Model Output Current Model
0-6V 0-33A ZUP6-33 0-66A ZUP6-66 0-132A ZUP6-132
0-10V 0-20A ZUP10-20 0-40A ZUP10-40 0-80A ZUP10-80
0-20V 0-10A ZUP20-10 0-20A ZUP20-20 0-40A ZUP20-40
0-36V 0-6A ZUP36-6 0-12A ZUP36-12 0-24A ZUP36-24
0-60V 0-3.5A ZUP60-3.5 0-7A ZUP60-7 0-14A ZUP60-14
0-80V 0-2.5A ZUP80-2.5 0-5A ZUP80-5 ー ー
0-120V 0-1.8A ZUP120-1.8 0-3.6A ZUP120-3.6 ー ー
ZUP SERIES
A-342
ZUP
・All specifications are subject to change without notice.
(*1) Minimum voltage is guaranteed to maximum 0.2% of the rated out-
put voltage.
(*2) Minimum current is guaranteed to maximum 0.4% of the rated out-
put current.
(*3) Time for recovery to within +/-50mV against current change of 50%
to 100%.
(*4) From zero volts to full scale , resistive load and current setting at
maximum.
(*5) From no load to full load , constant input voltage.
(Measure with JEITA RC-9131 probe.)
(*6) From 85~132Vac or 170~265Vac constant load.
(*7) At cold start Ta=25 …C.
(*8) Change in output over 8 hour interval constant line, load and ambi-
ent temperature following 30-minutes warm-up.
(*9) Given for control of the output via the serial communication or via
front panel controls.
(*10) Inverter shut down method, manual reset (OVP will shut down out-
put)
(*11) For cases where conformance to various safety specs. (UL, IEC,
etc.) are required, to be described as 100-240VAC (50/60Hz) on
name plate.
(*12) At 100V/200V and Maximum Output Power.
- When forced air cooling, refer to derating curve.
ITEMS/UNITS
MODEL
ZUP6-33 ZUP6-66
ZUP6-132 ZUP10-20
ZUP10-40
ZUP10-80 ZUP20-10
OUTPUT VOLTAGE (*1) V 0-6 0-10
OUTPUT CURRENT (*2) A 0-33 0-66 0-132 0-20 0-40 0-80 0-10
RATED OUTPUT POWER
W 198 396 792 200 400 800 200
CONSTANT
VOLTAGE
LOAD REGULATION 0.005%+2mV From No load to Full load, constant input voltage.
LINE REGULATION 0.005%+1mV From 85-132VAC or 170-265VAC, constant load.
RMS RIPPLE (5Hz-1MHz Bandwidth)
mV 5 5 8 5 5 8 5
RIPPLE (pk to pk) (20MHz Bandwidth)
mV 50 50 100 50 50 90 50
RECOVERY TIME (*3) mS 1 0.5
TEMPERATURE COEFFICIENT 30ppm/…C from rated voltage following 30-minute warm-up.
TEMPERATURE DRIFT
0.01%+2mV Change in output over 8-hour interval under constant line, load and ambient temp following30-minute warm-up.
UP PROGRAMMING RESPONSE TIME (*4)
mS 50 50 60 50 50 60 50
DOWN PROGRAMMING
FULL LOAD mS 50 50 50 50 50 50 50
RESPONSE TIME NO LOAD mS 250 350
CONSTANT
CURRENT
LOAD REGULATION (*5) 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA
LINE REGULATION (*6) 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA
RMS RIPPLE (5Hz-1MHz Bandwidth)
mA 50 100 200 25 50 100 15
TEMPERATURE COEFICIENT 100ppm/ …C from rated current following 30-minute warm-up.
TEMPERATURE DRIFT (*8) 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA
PROGRAM
MING (*9)
RESOLUTION
Better than 0.028% of rated output voltage
VOLTAGE ACCURACY 0.02%+5mV 0.02%+8mV
RESOLUTION
Better than 0.03% of rated output current
CURRENT ACCURACY 0.4%+40mA
OVERVOLTAGE PROTECTION (*10) V 0-7.5 0-13
HOLD-UP TIME 20mS At 100V/200VAC, rated output voltage and output current.
DISPLAY
VOLTAGE 3 digits ( 6v; 20v; 36v; 60v; 80v); 3.5 digits ( 10v; 120v ) accuracy: 0.2% +/- 2 digits.
CURRENT 3.5 digits (132A); All others 3 digits, accuracy: 0.5% +/- 3 digits.
STATUS CV/CC, Alarm, Fold, Local/Remote, On/Off.
OUTPUT PROTECTIONS Over Voltage, Over Temperature, Foldback.
INPUT
INPUT VOLTAGE (*11) 85-265Vac Continuous, 47-63Hz
INPUT CURRENT (*12) A 3.0/1.5 5.6/2.7 11.2/5.4 2.9/1.4 5.6/2.7 11.2/5.4 2.9/1.4
INRUSH CURRENT ( 100/200V ) A 15/30 (*7) 15 30 15/30 (*7) 15 30 15/30 (*7)
EFFICIENCY ( *12 ) % 69/72 74/77 74/77 73/77 79/82 77/81 74/78
INPUT CURRENT HARMONICS Complies with EN61000-3-2, Class A
POWER FACTOR (TYP) 0.99 at 100/200Vac, 100% load.
ENVIRONMENT
OPERATING TEMPERATURE 0 to 50 …C ; 100% Load.
OPERATING HUMIDITY 30-90% RH ( No dewdrop ).
STORAGE TEMPERATURE -20 to 70 …C
STORAGE HUMIDITY 10 - 95% RH (No dewdrop).
MECHANICAL
VIBRATION 10-55Hz, Amplitude (sweep 1 min ) 2G, X, Y, Z, When mounted with mounting screws.
SHOCK Less than 20G
WEIGHT Kg 2.9 3.2 5.8 2.9 3.2 5.8 2.9
SIZE (W x H x D) mm 200W and 400W units: 70 x 124 x 350. 800W units: 140 x 124 x 350 (Refer to outline drawing)
EXTERNAL
CONTROL
FUNCTIONS
OUTPUT ON/OFF By TTL Signal or Dry Contact (Refer to instruction manual).
OUTPUT GOOD Open collector (Refer to instruction manual).
OUTPUT VOLTAGE PROGRAMMING
By Voltage ( 0-4V ) or by Resistance ( 0-4K ) (Refer to instruction manual).
OUTPUT CURRENT PROGRAMMING
By Voltage ( 0-4V ) or by Resistance ( 0-4K ) (Refer to instruction manual).
REMOTE SENSING Maximum 0.5V drop on each load wire for model up to 60V and 2V for the 80V, 120V models
COMMUNICATION INTERFACE RS232 and RS485 Built-in, IEEE488 Optional.
APPROVALS
SAFETY STANDARDS UL3111-1, EN61010-1
EMC STANDARDS EN61326-1, IEC 61326-1, FCC part 15 (class A).
CONDUCTED EMI EN55022-B, FCC-B, VCCI-2
RADIATED EMI EN55022-A, FCC-A, VCCI-1
SERIES OPERATION Up to 2 units (Refer to instruction manual).
PARALLEL OPERATION Master - Slave method; up to 5 units (Refer to instruction manual).
COOLING Forced air by blower fan (Blower fan is mounted within unit).
WITHSTAND VOLTAGE Input - Chassis...2.0kVAC 1 min, Input - Output...3.0kVac 1 min, Output - GND...500VAC 1 min.
ISOLATION RESISTANCE More than 100MOhm at 25 …C and 70% R.H.
ZUP Specifications
ZUP SERIES
A-343
ZUP
・All specifications are subject to change without notice.
ZUP20-20
ZUP20-40 ZUP36-6
ZUP36-12
ZUP36-24
ZUP60-3.5
ZUP60-7
ZUP60-14
ZUP80-2.5
ZUP80-5
ZUP120-1.8
ZUP120-3.6
0-20 0-36 0-60 0-80 0-120
0-20 0-40 0-6 0-12 0-24 0-3.5 0-7 0-14 0-2.5 0-5 0-1.8 0-3.6
400 800 216 432 864 210 420 80 200 400 216 432
0.005%+4mV
0.005%+2mV
5 5 5 5 5 5 5 5 20 20 20 20
50 80 50 50 70 50 50 60 70 70 80 80
0.2 0.2 0.2 0.2 0.2
400 500 750 800 1000
50 60 50 50 60 50 50 60 100 100 100 100
50 50 50 50 50 50 50 70 60 60 80 80
0.01%+5mA
0.07%+10mA
0.01%+5mA 0.01%+5mA
0.07%+10mA
0.01%+5mA 0.01%+5mA
0.07%+10mA
0.01%+5mA 0.01%+5mA 0.01%+5mA 0.01%+5mA
0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+2mA 0.01%+2mA
30 60 7.5 15 30 5 10 20 5 5 5 5
0.02%+5mA
0.05%+10mA
0.02%+5mA 0.02%+5mA
0.05%+10mA
0.02%+5mA 0.02%+5mA
0.05%+10mA
0.02%+5mA 0.02%+5mA 0.02%+5mA 0.02%+5mA
0.02%+12mV 0.02%+20mV 0.02%+35mV 0.02%+50mV 0.02%+80mV
0-24 0-40 0-66 0-88 0-132
5.6/2.7 11.2/5.4 2.9/1.4 5.6/2.7 11.2/5.4 2.9/1.4 5.6/2.7 11.2/5.4 2.6/1.3 4.9/2.4 2.9/1.4 5.3/2.6
15 30 15/30 (*7) 15 30 15/30 (*7) 15 30 15/30 (*7) 15 15/30 (*7) 15
79/83 79/82 76/80 80/84 80/84 75/79 80/84 80/84 78/82 83/87 78/82 82/86
3.2 5.8 2.9 3.2 5.8 2.9 3.2 5.8 2.9 3.2 2.9 3.2
ZUP SERIES
A-344
ZUP
lAll specifications are subject to change without notice.
POWER
ADDR OVP/UVP V/A FOLD REM OUT
131.0 ± 1.0
131.0 ± 1.0
139.5 ± 1.0
124.0 ± 0.5
19.0
B
B
B
B
± 0.5
59.5 20.0
20.0
13.0
48.4
±0.5
47.0 46.3
Note 1
External
Control
Connector
RS232/RS485
communication
connectors
IEC320
AC Inlet
Note 1
External
Control
Connector
RS232/RS485
communication
connectors
IEC320
AC Inlet
Mounting Holes
Tap M4 x 4 marked A
REMOVABLE HANDLE
Rubber Bumpers
4 places marked B
(removable)
Mounting Holes: Tap M4 x 4 marked A
Rubber Bumpers:
4 places marked B (removable)
11.0
99.6± 120.0
POWER
ADDR OVP/UVP V/A FOLD REM OUT
131.0 ± 1.0
131.0 ± 1.0
139.5 ± 1.0
124.0 ± 0.5
19.0
B
B
B
B
± 0.5
59.5 20.0
20.0
13.0
48.4
±0.5
47.0 46.3
Note 1
External
Control
Connector
RS232/RS485
communication
connectors
IEC320
AC Inlet
Note 1
External
Control
Connector
RS232/RS485
communication
connectors
IEC320
AC Inlet
Mounting Holes
Tap M4 x 4 marked A
REMOVABLE HANDLE
Rubber Bumpers
4 places marked B
(removable)
Mounting Holes: Tap M4 x 4 marked A
Rubber Bumpers:
4 places marked B (removable)
11.0
99.6± 120.0
POWER
ADDR OVP/UVP V/A FOLD REM OUT
131.0 ± 1.0
131.0 ± 1.0
139.5 ± 1.0
124.0 ± 0.5
19.0
B
B
B
B
± 0.5
59.5 20.0
20.0
13.0
48.4
±0.5
47.0 46.3
Note 1
External
Control
Connector
RS232/RS485
communication
connectors
IEC320
AC Inlet
Note 1
External
Control
Connector
RS232/RS485
communication
connectors
IEC320
AC Inlet
Mounting Holes
Tap M4 x 4 marked A
REMOVABLE HANDLE
Rubber Bumpers
4 places marked B
(removable)
Mounting Holes: Tap M4 x 4 marked A
Rubber Bumpers:
4 places marked B (removable)
11.0
99.6± 120.0
POWER
ADDR OVP/UVP V/A FOLD REM OUT
131.0 ± 1.0
131.0 ± 1.0
139.5 ± 1.0
124.0 ± 0.5
19.0
B
B
B
B
± 0.5
59.5 20.0
20.0
13.0
48.4
±0.5
47.0 46.3
Note 1
External
Control
Connector
RS232/RS485
communication
connectors
IEC320
AC Inlet
Note 1
External
Control
Connector
RS232/RS485
communication
connectors
IEC320
AC Inlet
Mounting Holes
Tap M4 x 4 marked A
REMOVABLE HANDLE
Rubber Bumpers
4 places marked B
(removable)
Mounting Holes: Tap M4 x 4 marked A
Rubber Bumpers:
4 places marked B (removable)
11.0
99.6± 120.0
[ZUP 200W/400W Units]
Outline Drawing
Note:
1: Housing AMP: 87631-9
with pins AMP: 87523-6.
2: Header PHOENIX: PSC 1,5/3-M-PE
Plug PHOENIX: PSC 1,5/3-3-F
Plastic cable housing
Included with the power supply.
[ZUP 800W Unit]
Note:
1: Housing AMP: 87631-9
with pins AMP: 87523-6.
Included with the power supply.
unit: mm
70x124x350
WEIGHT: Kg
200W units:2.9
400W units:3.2
unit:
140x124x350 mm
WEIGHT:
5.8 kg
Rear Panel
Output Voltage
Connector
For 80V, 120V
Models.
ZUP SERIES
A-345
ZUP
lAll specifications are subject to change without notice.
Accessories / optional items (refer to the attached diagram for appearance)
Region AC Cord Power Supply Connector Wall Plug P/N
ZUP / J
Europe 10A / 250Vac L =2m IEC320-C13 INT’L 7 / VII ZUP / E
ZUP / O
Accessories
Three optional cords are possible according to order:
1. AC Cord Sets
2. Communication Cable
RS232/RS485 cable is used to connect the power supply to the PC controller
3. ZUP serial link cable
Used to chain Power Supply to Power Supply from a serial communication bus
Mode PC connector Communication cable
Power Supply Connector
P/N
RS232 DB-9 Shield Ground , L=1m EIA / TIA-568A (RJ-45) ZUP/NC401
RS232 DB-25 Shield Ground , L=1m EIA / TIA-568A (RJ-45) ZUP/NC403
Mode Communication cable Power Supply Connector Remote IN / OUT P/N
RS485 Shield Ground , L = 50cm EIA / TIA-568A (RJ-45) ZUP / W
North America Europe
DB-25 (female connector) DB-9 (female connector) EIA/TIA (RJ-45)
Sl-32 Standard
ZUP SERIES
A-346
ZUP
lAll specifications are subject to change without notice.
Options ( 200W, 400W, 800W Models )
1. FRONT PANEL OUTPUT JACKS
P/N: ZUP / L
Outline Drawing: Physical Dimensions in mm.
ZUP 200W/400W Units: 70x153x405.9
ZUP 800W Units: 140x153x405.9
2. ZUP ASSEMBLIES
Dual Output Packing 200W/400W models
P/N: ZUP/NL200
3. 19" RACK MOUNTED ATE AND OEM UP TO 2.4 KW
Up to six power units can be assembled into a 19 , 3U rack, kit P/N NL100.
In cases where the entire rack is not occupied with power units, NL101 blank panels can be installed.
P/N: ZUP/NL100
Up to 20A output current via front panel jacks.
ZUP SERIES
A-347
ZUP
lAll specifications are subject to change without notice.
Application examples
ZUP Configurations
BENCH TOP POWER SUPPLY
Master - Slave method: Active current sharing up to 5 units.
PARALLEL OPERATION
Up to 31 ZUP units can be controlled via RS232
interface.
REMOTE PROGRAMMING VIA RS232
Up to 31 ZUP units can be controlled via
RS485interface.
For operation environments that require high noise
immunity or long distance communication, it is
recommended to use the built- in RS485interface.
REMOTE PROGRAMMING VIA RS485
GPIBDRS485 CONTROLLER
The GP485 is a high performance serial to GPIB Interface
It enables a ZUP series with RS485 port to be a Talker, Listener, or controller on the GPIB
Remote Programming Via GPIB.
* Controls up to 31 ZUP units through a
single GPIB address.
* Conforms to all versions of the IEEE488
standard, including IEEE488.2.
* 19 racking possibility.
* Application software -
LabView, LabWindows.
Linking ZUP units with RS485 control.
Linking ZUP units with RS232 control.
Single Parallel (Master / Slave)
ZUP SERIES
A-348
ZUP
lAll specifications are subject to change without notice.
Six units can be assembled into 19-inch rack / 3U high
to meet your configuration requirements
Rack Mounted ATE and OEM up to 2.4KW
Power Modules Table
Module Type 200W 400W
800W
0 ~ 6V 33A 66A 132A
0 ~ 10V 20A 40A 80A
0 ~ 20V 10A 20A 40A
0 ~ 36V 6A 12A 24A
0 ~ 60V 3.5A 7A 14A
0 ~ 80V 2.5A 5A
0 ~ 120V 1.8A 3.6A
19"rack width 1 / 6 width 1 / 6 width 2 / 6 width
ZUP SERIES
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TDK-Lambda:
ZUP/NC404