F-219 SUPPLEMENT (Rev 12APR19) ISDF-07-D-M TSDF-10-D-S T1M44-L-2830-01-G CC03R-2830-01-G (1.27 mm) .050" ISDF, CC03R, CC03M, TSDF, T1M44-L, T1M44-R SERIES DISCRETE WIRE COMPONENTS & TOOLING SPECIFICATIONS For complete specifications see www.samtec.com?ISDF, www.samtec.com?CC03R or www.samtec.com?CC03M Insulator Material: Black LCP Contact Material: BeCu POSITIONS PER ROW TYPE ISDF = Housing RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality ROW OPTION -03, -04, -05, -07, -10, -15, -20, -25, -40, -50 01 = Double Row = Screw Down (-D only) (11.18) .440 SPECIFICATIONS For complete specifications see www.samtec.com?TSDF, www.samtec.com?T1M44-L or www.samtec.com?T1M44-R Insulator Material: Black LCP Contact Material: BeCu TSDF = Housing = Contact, Mini Reel (1,000-5,000 Parts per Reel) -G (1.27) .050 DIA (15.37) .605 (3.81) .150 S TYPE (3.81) .150 WIRE GAUGE -D = Double Row T1M44-L = Contact, Loose -2830 = 28 to 30 AWG T1M44-R = Contact, Full Reel (35,000 Parts per Reel) (1.27) .050 01 01 PLATING -G (0.46) .018 DIA (6.10) .240 (4.83) .190 (14.26) .562 Note: Some sizes, styles and options are non-standard, non-returnable. = Gold flash on contact (0.38) .015 (1.91) .075 ROW OPTION -03, -04, -05, -07, -10, -15, -20, -25, -40, -50 No. of Positions x (1.27) .050 + (2.54) .100 02 PLATING = 10 " (0.25 m) Gold on contact CC03M -S (Standard sizes) * Hand Tool: CAT-HT-144-2830-12 * Extraction Tool: CAT-EX-169-01 -M POSITIONS PER ROW TYPE -2830 = 28 to 30 AWG (1.78) .070 -D TOOLING * Mini Applicator CAT-MC-144-2830-XX-01 (3.68) .145 (2.03) .080 (6.32) .249 Note: Some sizes, styles and options are non-standard, non-returnable. = Contact, Full Reel (35,000 Parts per Reel) 01 -GF CC03R (2.00) .079 DIA (1.27) .050 (6.35) .250 (1.27) .050 * Extraction Tool: CAT-EX-169-01 WIRE GAUGE TYPE -S 02 * Mini Applicator: CAT-MC-203-2830-XX-01 -S (5.08) .200 No. of Positions x (1.27) .050 + (0.38) .015 (1.27) .050 (2.03) .080 = Metal Retention Latch -D (Standard sizes) TOOLING -M -S = Single Row FILE NO. E111594 * Hand Tool: CAT-HT-203-2830-12 * Clamp for mounting hand tool to work table: CAT-HT-MNT-01 OPTION (6.05) .238 (3.81) .150 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. = 10 " (0.25 m) Gold on contact