MOTOROLA Order this document by MAC223/D SEMICONDUCTOR TECHNICAL DATA MAC223 Series MAC223A Series Triacs Silicon Bidirectional Triode Thyristors . . . designed primarily for full-wave ac control applications such as lighting sysjtems, heater controls, motor controls and power supplies; or wherever full-wave silicongate-controlled devices are needed. * Off-State Voltages to 800 Volts * All Diffused and Glass-Passivated Junctions for Parameter Uniformity and Stability * Small, Rugged, Thermowatt Construction for Thermal Resistance and High Heat Dissipation * Gate Triggering Guaranteed in Three Modes (MAC223 Series) or Four Modes (MAC223A Series) TRIACs 25 AMPERES RMS 200 thru 800 VOLTS MT2 MT1 G CASE 221A-04 (TO-220AB) STYLE 4 MAXIMUM RATINGS (TJ = 25 unless otherwise noted.) Rating Symbol Peak Repetitive Off-State Voltage (TJ = -40 to 125C)(1) (1/2 Sine Wave 50 to 60 Hz, Gate Open) VDRM On-State RMS Current (TC = 80C) (Full Cycle Sine Wave 50 to 60 Hz) Peak Non-repetitive Surge Current (One Full Cycle, 60 Hz, TC = 80C, preceded and followed by rated current) p 2 s) Peak Gate Voltage (t p 2 s) Peak Gate Power (t p 2 s) Peak Gate Current (t Average Gate Power (TC = 80C, t p 8.3 ms) Operating Junction Temperature Range Storage Temperature Range Mounting Torque Unit Volts 200 400 600 800 MAC223-4, MAC223A4 MAC223-6, MAC223A6 MAC223-8, MAC223A8 MAC223-10, MAC223A10 Circuit Fusing (t = 8.3 ms) Value IT(RMS) 25 Amps ITSM 250 Amps I2t 260 A2s IGM 2 Amps VGM 10 Volts PGM 20 Watts PG(AV) 0.5 Watts TJ -40 to 125 C Tstg -40 to 150 C -- 8 in. lb. 1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Motorola Thyristor Device Data Motorola, Inc. 1995 1 THERMAL CHARACTERISTICS Symbol Max Unit Thermal Resistance, Junction to Case Characteristic RJC 1.2 C/W Thermal Resistance, Junction to Ambient RJA 60 C/W ELECTRICAL CHARACTERISTICS (TC = 25C and either polarity of MT2 to MT1 voltage unless otherwise noted.) Characteristic Symbol Peak Blocking Current(1) (VD = Rated VDRM) TJ = 25C TJ = 125C IDRM Peak On-State Voltage (ITM = 35 A Peak, Pulse Width VTM p 2 ms, Duty Cycle p 2%) Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 ) MT2( + ), G( + ); MT2( - ), G( - ); MT( + ), G( - ) MT2( - ), G( + ) "A" SUFFIX ONLY IGT Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 ) MT2(+), G(+); MT2(-), G(-); MT(+), G(-) MT2(-), G(+) "A" SUFFIX ONLY (VD = Rated VDRM, TJ = 125C, RL = 10 k) MT(+), G(+); MT2(-), G(-); MT2(+), G(-) MT2(-), G(+) "A" SUFFIX ONLY VGT Min Typ Max Unit -- -- -- -- 10 2 A mA -- 1.4 1.85 Volts mA -- -- 20 30 50 75 Volts -- -- 0.2 1.1 1.3 0.4 2 2.5 -- 0.2 0.4 -- Holding Current (VD = 12 V, ITM = 200 mA, Gate Open) IH -- 10 50 mA Gate Controlled Turn-On Time (VD = Rated VDRM, ITM = 35 A Peak, IG = 200 mA) tgt -- 1.5 -- s dv/dt -- 40 -- V/s dv/dt(c) -- 5 -- V/s Critical Rate of Rise of Off-State Voltage (VD = Rated VDRM, Exponential Waveform, TC = 125C) Critical Rate of Rise of Commutation Voltage (VD = Rated VDRM, ITM = 35 A Peak, Commutating di/dt = 12.6 A/ms, Gate Unenergized, TC = 80C) FIGURE 1 - RMS CURRENT DERATING 125 115 105 95 85 75 0 5.0 10 15 20 25 IT(RMS), RMS ON-STATE CURRENT (AMPS) 2 FIGURE 2 - ON-STATE POWER DISSIPATION PD , AVERAGE POWER DISSIPATION (WATTS) TC, MAXIMUM ALLOWABLE CASE TEMPERATURE ( C) 1. Ratings apply for open gate conditions. Devices shall not be tested with a constant current source for blocking voltage such that the voltage applied exceeds the rated blocking voltage. 40 30 20 10 0 0 5.0 10 15 20 25 IT(RMS), RMS ON-STATE CURRENT (AMPS) Motorola Thyristor Device Data FIGURE 4 - GATE TRIGGER VOLTAGE NORMALIZED GATE VOLTAGE NORMALIZED GATE CURRENT FIGURE 3 - GATE TRIGGER CURRENT 3.0 2.0 VD = 12 V RL = 100 1.0 0.5 0.3 0.2 0.1 -60 -40 -20 0 20 40 60 80 100 120 3.0 2.0 1.0 0.5 0.3 0.2 0.1 -60 140 VD = 12 V RL = 100 -40 -20 TJ, JUNCTION TEMPERATURE (C) 0.5 0.3 0.2 0.1 -60 -40 -20 0 20 40 60 80 TJ, JUNCTION TEMPERATURE (C) Motorola Thyristor Device Data 100 120 140 i TM, INSTANTANEOUS ON-STATE CURRENT (AMPS) NORMALIZED HOLD CURRENT ITM = 200 mA Gate Open 1.0 20 40 60 80 100 120 140 FIGURE 6 - TYPICAL ON-STATE CHARACTERISTICS FIGURE 5 - HOLD CURRENT 2.0 0 TJ, JUNCTION TEMPERATURE (C) 200 100 50 10 TJ = 25C 5.0 1.0 0.5 0.1 0 1.0 2.0 3.0 4.0 VTM, INSTANTANEOUS ON-STATE VOLTAGE (VOLTS) 3 PACKAGE DIMENSIONS -T- B F T NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. SEATING PLANE C S 4 Q A 1 2 3 STYLE 4: PIN 1. 2. 3. 4. U H MAIN TERMINAL 1 MAIN TERMINAL 2 GATE MAIN TERMINAL 2 K Z R L V J G D DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.055 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.39 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 N CASE 221A-04 (TO-220AB) Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 4 Motorola Thyristor Device Data *MAC223/D* MAC223/D