which can have any conductive material connected to it). But if you can paint your own, why
would you use anything else?
The pre-programmed Touch Board is Arduino-at-Heart, so your Arduino shields and code will
work seemlessly with it as if it were an Arduino Leonardo. It can also play music off an SD card
— you could even paint a piano and turn your Touch Board into a synthesizer! Take advantage
of it's LiPo battery charger you can make any of your projects mobile.
Comes with a 128MB card and the assembled/tested Touch Board. You'll need some way to
amplify the audio, using powered speakers or just use headphones. A Lipoly battery is not
included, any 500mAh or larger battery will work great if you want to make it portable. A
microUSB cable is also handy to recharge/reprogram the Touch board, not included but you
can use any data-capable micro USB cable you have around the house. We also recommend
picking up some conductive paint or other conductive materials to play with.
TECHNICAL DETAILS
Board Schematic
12 Touch electrodes of which 8 can be configured as extra digital inputs or outputs with
PWM capability
20 Arduino-compatible digital I/O pins (3 used for Touch IC and 5 for MP3 IC – can be
disabled)
7 Arduino-compatible PWM channels
Dimensions: 84mm x 62mm x 10mm / 3.3" x 2.4" x .4"
For Bare Conductive product support, email them at info@bareconductive.com