AT-30511, AT-30533 Low Current, High Performance NPN Silicon Bipolar Transistors Data Sheet Description Features Avago's AT-30511 and AT-30533 are high performance NPN bipolar transistors that have been optimized for maximum fT at low voltage operation, making them ideal for use in battery powered applications in wireless markets. The AT-30533 uses the 3 lead SOT23, while the AT30511 places the same die in the higher performance 4 lead SOT-143. Both packages are industry standard, and compatible with high volume surface mount assembly techniques. * High Performance Bipolar Transistor Optimized for Low Current, Low Voltage Operation The 3.2 micron emitter-to-emitter pitch and reduced parasitic design of these transistors yields extremely high performance products that can perform a multiplicity of tasks. The 5 emitter finger interdigitated geometry yields an extremely fast transistor with high gain and low operating currents. * Lead-free Optimized performance at 2.7 V makes these devices ideal for use in 900 MHz, 1.8 GHz, and 2.4 GHz battery operated systems as an LNA, gain stage, buffer, oscillator, or active mixer. Typical amplifier designs at 900 MHz yield 1.3 dB noise figures with 13 dB or more associated gain at a 2.7 V, 1 mA bias. Voltage breakdowns are high enough for use at 5 volts. High gain capability at 1 V, 1 mA makes these devices a good fit for 900 MHz pager applications. The AT-3 series bipolar transistors are fabricated using an optimized version of Avago's 10 GHz fT, 30 GHz fMAX Self-Aligned-Transistor (SAT) process. The die are nitride passivated for surface protection. Excellent device uniformity, performance and reliability are produced by the use of ion-implantation, self-alignment techniques, and gold metalization in the fabrication of these devices. * 900 MHz Performance: AT-30511: 1.1 dB NF, 16 dB GA AT-30533: 1.1 dB NF, 13 dB GA * Characterized for End-Of-Life Battery Use (2.7 V) * SOT-23 and SOT-143 SMT Plastic Packages * Tape-And-Reel Packaging Option Available Pin Connections and Package Marking EMITTER COLLECTOR 305x BASE EMITTER SOT-143 (AT-30511) COLLECTOR 305x BASE EMITTER SOT-23 (AT-30533) Note: Notes: Top view. Package marking provides orientation Top View. Package Marking provides orientation and identification. and identification. "x" is the date code. "x" is the date code. AT-30511, AT-30533 Absolute Maximum Ratings Symbol Parameter VEBO VCBO VCEO IC PT Tj TSTG UnitsAbsolute Maximum[1] Emitter-Base Voltage Collector-Base Voltage Collector-Emitter Voltage Collector Current Power Dissipation[2] [3] Junction Temperature Storage Temperature V V V mA mW C C Thermal Resistance[2]: jc = 550C/W 1.5 11 5.5 8 100 150 -65 to 150 Notes: 1. Operation of this device above any one of these parameters may cause permanent damage. 2. Tmounting surface = 25C. 3. Derate at 1.82 mW/C for TC > 95C. Electrical Specifications, TA = 25C Symbol Parameters and Test Conditions Units Min AT-30511 Typ Max NF Noise Figure VCE = 2.7 V, IC = 1 mA f = 0.9 GHz dB 1.1[1] GA Associated Gain VCE = 2.7 V, IC = 1 mA f = 0.9 GHz dB 16[1] hFE Forward Current Transfer Ratio VCE = 2.7 V IC = 1 mA - 14[1] 70 1.4[1] 300 11[2] Typ Max 1.1[2] 1.4[2] 13[2] 70 300 ICBO Collector Cutoff Current VCB = 3 V A 0.03 0.2 0.03 0.2 IEBO Emitter Cutoff Current VEB = 1 V A 0.1 1.5 0.1 1.5 Notes: 1. Test circuit B, Figure 1. Numbers reflect device performance de-embedded from circuit losses. Input loss = 0.4 dB; output loss = 0.4 dB. 2. Test circuit A, Figure 1. Numbers reflect device performance de-embedded from circuit losses. Input loss = 0.4 dB; output loss = 0.4 dB. VBB VCC W = 10 L = 1860 W = 10 L = 1860 25 1000 pF 1000 pF W = 10 L = 1000 W = 30 L = 100 TEST CIRCUIT BOARD MATL = 0.062" FR-4 ( = 4.8) W = 30 L = 100 W = 10 L = 1025 TEST CIRCUIT A: W = 20 L = 100 TEST CIRCUIT B: W = 20 L = 200 x 2 DIMENSIONS IN MILS NOT TO SCALE Figure 1. Test Circuit for Noise Figure and Associated Gain. This Circuit is a Compromise Match Between Best Noise Figure, Best Gain, Stability, a Practical, Synthesizable Match, and a Circuit Capable of Matching Both the AT-305 and AT310 Geometries. AT-30511 fig 1 Min AT-30533 AT-30511, AT-30533 Characterization Information, TA = 25C Symbol Parameters and Test Conditions AT-30511 AT-30533 Units Typ Typ P1dB Power at 1 dB Gain Compression (opt tuning) VCE = 2.7 V, IC = 5 mA f = 0.9 GHz dBm 7 7 G1dB Gain at 1 dB Gain Compression (opt tuning) VCE = 2.7 V, IC = 5 mA f = 0.9 GHz dB 16.5 15 IP3 Output Third Order Intercept Point, VCE = 2.7 V, IC = 5 mA (opt tuning) f = 0.9 GHz dBm 17 17 Gain in 50 System; VCE = 2.7 V, IC = 1 mA f = 0.9 GHz dB 10 9 VCB = 3V, f = 1 MHz pF 0.04 0.04 |S21|E2 CCB Collector-Base Capacitance Typical Performance 15 Ga (dB) NF MIN. 10 1.0 1.5 2.0 0 2.5 0 0.5 8 20 0 0.5 5 mA 4 2 mA 2.0 2.5 FREQUENCY (GHz) Figure 5. AT-30511 and AT-30533 Power at 1 dB Gain Compression vs. Frequency and Current at Vce = 2.7 V. AT-30511 fig 5 2 2.5 Figure 4. AT-30533 Associated Gain at Optimum Noise Match vs. Frequency and Current at Vce = 2.7 V. 25 20 15 2 mA 10 0 1.5 AT-30511 fig 4 5 mA 15 2 mA 10 5 5 1.5 1.0 FREQUENCY (GHz) 5 mA G 1dB (dBm) P 1dB (dBm) 25 1.0 0 2.5 AT-30511 fig 3 10 0.5 2.0 Figure 3. AT-30511 Associated Gain at Optimum Noise Match vs. Frequency and Current at Vce = 2.7 V. AT-30511 fig 2 0 1.5 FREQUENCY (GHz) Figure 2. AT-30511 and AT-30533 Minimum Noise Figure and Amplifier NF[1] vs. Frequency and Current at Vce = 2.7 V. 0 1.0 G 1dB (dBm) 0.5 5 FREQUENCY (GHz) 2 10 1 mA 5 1 mA 5 mA 6 15 1 mA 0.5 0 5 mA 5 mA 1.5 1.0 20 20 AMPLIFIER NF Ga (dB) NOISE FIGURE (dB) 2.0 0 25 25 2.5 0 0.5 1.0 1.5 2.0 2.5 FREQUENCY (GHz) Figure 6. AT-30511 1 dB Compressed Gain vs. Frequency and Current at Vce = 2.7 V. AT-30511 fig 6 0 0 0.5 1.0 1.5 2.0 2.5 FREQUENCY (GHz) Figure 7. AT-30533 1 dB Compressed Gain vs. Frequency and Current at Vce = 2.7 V. AT-30511 fig 7 Note: 1. Amplifier NF represents the noise figure which can be expected in a real circuit representing reasonable reflection coefficients and including circuit losses. 10 25 8 20 4 2 mA 5 0.5 1.0 1.5 2.0 0 2.5 0 0.5 Figure 8. AT-30511 and AT-30533 Power at 1 dB Gain Compression vs. Frequency and Current at Vce = 5 V. 4 20 5 mA G 1dB (dBm) P 1dB (dBm) 25 0 2 mA 0 0.5 1.5 2.0 15 2 mA 10 0 2.0 2 mA 10 0 0.5 0 100 15 10 1.5 1.0 NF 5 0 -50 0.5 0 50 1.5 2.0 2.5 Figure 13. AT-30533 1 dB Compressed Gain vs. Frequency and Current at Vce = 1 V. AT-30511 fig 13 2.0 Ga 1.0 FREQUENCY (GHz) 20 0.5 2.5 5 mA 15 0 2.5 Figure 12. AT-30511 1 dB Compressed Gain vs. Frequency and Current at Vce = 1 V. Ga (dBm) Ga (dBm) 1.5 2.0 1.0 50 1.0 2.5 10 5 0.5 25 1.5 2.0 5 2.5 15 1.5 AT-30511 fig 10 AT-30511 fig 12 Ga NF 1.0 Figure 10. AT-30533 1 dB Compressed Gain vs. Frequency and Current at Vce = 5 V. FREQUENCY (GHz) NOISE FIGURE (dB) 20 0.5 20 AT-30511 fig 11 25 0 FREQUENCY (GHz) 5 mA 0 2.5 Figure 11. AT-30511 and AT-30533 Power at 1 dB Gain Compression vs. Frequency and Current at Vce = 1 V. 0 0 100 TEMPERATURE (C) TEMPERATURE (C) Figure 14. AT-30511 Noise Figure and Associated Gain at Vce = 2.7 V, Ic = 1 mA vs. Temperature in Test Circuit, Figure 1. (Circuit Losses AT-30511 fig 14 De-embedded) Figure 15. AT-30533 Noise Figure and Associated Gain at Vce = 2.7 V, Ic = 1 mA vs. Temperature in Test Circuit, AT-30511 fig 15 Figure 1. (Circuit Losses De-embedded) 0 2.5 5 1.0 0 2.0 25 FREQUENCY (GHz) 0 -50 1.5 AT-30511 fig 9 6 -4 1.0 Figure 9. AT-30511 1 dB Compressed Gain vs. Frequency and Current at Vce = 5 V. AT-30511 fig 8 -2 2 mA 10 FREQUENCY (GHz) FREQUENCY (GHz) 2 5 mA 15 5 G 1dB (dBm) 0 2 mA 10 IM3 (dBc) IM5 (dBc) IM7 (dBc) -20 IM3 (dBc) 0 15 NOISE FIGURE (dB) 2 20 G 1dB (dBm) 5 mA 6 25 5 mA G 1dB (dBm) P 1dB (dBm) AT-30511, AT-30533 Typical Performance, continued -40 -60 -80 -9 -6 -3 0 3 6 POWER PER TONE (dBm) Figure 16. AT-30511 and AT-30533 Intermodulation Products vs. Output Power at Vce = 2.7 V, Ic = 10 mA, 900 MHz with Optimal Tuning.fig 16 AT-30511 AT-30511 Typical Scattering Parameters, VCE = 1 V, IC = 1 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.97 -5 10.84 0.5 0.95 -24 10.51 0.9 0.85 -42 9.96 1.0 0.83 -46 9.66 1.5 0.70 -67 8.71 1.8 0.63 -78 8.06 2.0 0.59 -85 7.75 2.4 0.50 -100 6.73 3.0 0.39 -122 5.58 4.0 0.29 -161 3.97 5.0 0.27 153 2.64 S21 Mag Ang dB 3.48 175 -39.42 3.35 155 -25.87 3.15 137 -21.46 3.04 133 -20.71 2.73 113 -18.44 2.53 102 -17.69 2.44 96 -17.27 2.17 84 -16.79 1.90 67 -16.32 1.58 45 -15.87 1.36 25 -15.47 S12 S22 Mag Ang Mag 0.01 86 0.99 0.05 72 0.95 0.08 61 0.92 0.09 58 0.91 0.12 46 0.84 0.13 41 0.80 0.14 37 0.77 0.14 32 0.73 0.15 27 0.68 0.16 20 0.63 0.17 20 0.61 AT-30511 Typical Noise Parameters, Common Emitter, ZO = 50 , 1 V, IC = 1 mA 30 Rn 1.49 1.33 0.98 0.74 Notes: 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 20 GAIN (dB) OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 0.3 0.96 10 0.9 0.4 0.92 19 1.8 0.9 0.83 43 2.4 1.3 0.76 60 MSG MAG 10 S21 0 0 1 S21 Mag Ang dB 3.51 174 -38.36 3.28 150 -25.08 2.97 128 -20.95 2.83 124 -20.21 2.44 102 -18.13 2.22 91 -17.33 2.12 85 -16.84 1.87 73 -16.05 1.63 57 -14.80 1.37 37 -12.58 1.20 19 -10.14 3 4 5 AT-30511 fig 17 S12 S22 Mag Ang Mag 0.01 87 0.99 0.06 73 0.95 0.09 63 0.89 0.10 61 0.88 0.12 54 0.80 0.14 51 0.77 0.14 50 0.74 0.16 49 0.71 0.18 49 0.68 0.24 48 0.65 0.31 45 0.62 Ang -3 -14 -24 -25 -33 -36 -38 -41 -46 -57 -69 30 1.02 0.86 0.58 0.38 20 GAIN (dB) Rn Notes : 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 2 Figure 17. AT-30511 Gains vs. Frequency at Vce = 1 V, Ic = 1 mA. AT-30533 Typical Noise Parameters, Common Emitter, ZO = 50 , 1 V, IC = 1 mA OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 0.3 0.94 7 0.9 0.4 0.89 16 1.8 0.9 0.75 43 2.4 1.3 0.65 65 MSG FREQUENCY (GHz) AT-30533 Typical Scattering Parameters, VCE = 1 V, IC = 1 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.95 -5 10.90 0.5 0.91 -25 10.32 0.9 0.77 -41 9.44 1.0 0.73 -45 9.03 1.5 0.55 -62 7.75 1.8 0.46 -71 6.94 2.0 0.41 -76 6.51 2.4 0.30 -85 5.45 3.0 0.17 -95 4.26 4.0 0.02 -139 2.71 5.0 0.12 61 1.56 Ang -2 -14 -24 -26 -36 -40 -43 -48 -53 -63 -72 MSG MAG 10 S21 0 0 1 MSG 2 3 4 5 FREQUENCY (GHz) Figure 18. AT-30533 Gains vs. Frequency at Vce = 2.7 V, Ic = 1 mA. AT-30511 fig 18 AT-30511 Typical Scattering Parameters, VCE = 2.7 V, IC = 1 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.97 -5 10.88 0.5 0.95 -23 10.58 0.9 0.86 -39 10.09 1.0 0.84 -43 9.83 1.5 0.72 -63 8.94 1.8 0.65 -73 8.32 2.0 0.61 -80 8.06 2.4 0.52 -93 7.06 3.0 0.41 -114 5.92 4.0 0.30 -150 4.35 5.0 0.26 165 3.06 S21 Mag Ang dB 3.50 175 -40.13 3.38 156 -26.71 3.20 139 -22.28 3.10 135 -21.51 2.80 115 -19.15 2.60 105 -18.28 2.53 99 -17.83 2.25 86 -17.29 1.98 70 -16.72 1.65 48 -16.13 1.42 28 -15.65 S12 S22 Mag Ang Mag 0.01 86 0.999 0.05 74 0.96 0.08 63 0.93 0.08 60 0.92 0.11 49 0.85 0.12 43 0.82 0.13 40 0.79 0.14 35 0.75 0.15 30 0.70 0.16 23 0.66 0.16 22 0.63 30 AT-30511 Typical Noise Parameters, Rn 1.49 1.33 0.98 0.74 Notes: 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 20 GAIN (dB) Common Emitter, ZO = 50 , 2.7 V, IC = 1 mA OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 0.3 0.96 10 0.9 0.4 0.92 19 1.8 0.9 0.83 43 2.4 1.3 0.76 60 MSG MAG 10 S21 0 0 1 S21 Mag Ang dB 3.45 174 -39.49 3.24 151 -26.05 2.96 130 -21.78 2.83 126 -21.05 2.46 105 -18.88 2.25 94 -18.08 2.15 88 -17.58 1.90 76 -16.77 1.66 60 -15.50 1.39 40 -13.20 1.22 22 -10.67 4 5 AT-30511 fig 19 S12 S22 Mag Ang Mag 0.01 87 0.999 0.05 74 0.95 0.08 64 0.91 0.09 63 0.90 0.11 55 0.83 0.12 53 0.79 0.13 52 0.77 0.15 51 0.74 0.17 51 0.71 0.22 52 0.68 0.29 49 0.66 Ang -2 -13 -22 -23 -31 -34 -36 -39 -44 -54 -66 30 1.02 0.88 0.58 0.38 20 GAIN (dB) Rn Notes: 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 3 Figure 19. AT-30511 Gains vs. Frequency at Vce = 2.7 V, Ic = 1 mA. AT-30533 Typical Noise Parameters, Common Emitter, ZO = 50 , 2.7 V, IC = 1 mA OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 0.3 0.94 7 0.9 0.4 0.89 16 1.8 0.9 0.75 43 2.4 1.3 0.65 65 2 FREQUENCY (GHz) AT-30533 Typical Scattering Parameters, VCE = 2.7 V, IC = 1 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.95 -5 10.76 0.5 0.92 -23 10.21 0.9 0.78 -39 9.42 1.0 0.75 -42 9.04 1.5 0.58 -59 7.83 1.8 0.49 -66 7.04 2.0 0.44 -71 6.64 2.4 0.33 -79 5.59 3.0 0.21 -87 4.40 4.0 0.05 -88 2.87 5.0 0.09 47 1.72 Ang -2 -13 -23 -25 -34 -38 -41 -46 -51 -61 -69 MSG MAG 10 0 MSG S21 0 1 2 3 4 5 FREQUENCY (GHz) Figure 20. AT-30511 Gains vs. Frequency at Vce = 2.7 V, Ic = 1 mA. AT-30511 fig 20 AT-30511 Typical Scattering Parameters, VCE = 2.7 V, IC = 5 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.88 -11 22.49 0.5 0.70 -48 20.42 0.9 0.49 -72 17.77 1.0 0.46 -77 17.09 1.5 0.30 -100 14.44 1.8 0.24 -112 13.10 2.0 0.21 -120 12.31 2.4 0.16 -140 10.94 3.0 0.13 -172 9.18 4.0 0.15 137 7.03 5.0 0.21 106 5.44 S21 Mag Ang dB 13.32 169 -40.50 10.49 134 -28.45 7.73 111 -25.24 7.15 107 -24.70 5.27 89 -22.62 4.52 81 -21.65 4.13 76 -21.05 3.52 67 -20.01 2.88 55 -18.55 2.25 38 -16.57 1.87 22 -14.88 S12 S22 Mag Ang Mag 0.01 83 0.97 0.04 64 0.82 0.05 57 0.70 0.06 55 0.69 0.07 53 0.62 0.08 52 0.59 0.09 52 0.58 0.10 50 0.57 0.12 48 0.55 0.15 44 0.53 0.18 39 0.52 30 AT-30511 Typical Noise Parameters, Rn 1.10 0.96 0.66 0.47 Notes: 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. MSG 20 GAIN (dB) Common Emitter, ZO = 50 , 2.7 V, IC = 5 mA OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 1.1 0.77 9 0.9 1.2 0.71 18 1.8 1.5 0.60 45 2.4 1.8 0.51 65 S21 10 0 0 1 S21 Mag Ang dB 12.98 164 -39.96 8.46 121 -28.03 5.60 100 -24.09 5.13 96 -23.32 3.65 81 -20.30 3.11 73 -18.88 2.84 69 -18.02 2.43 61 -16.50 2.02 50 -14.57 1.64 34 -11.90 1.42 19 -9.66 3 4 5 AT-30511 fig 21 S12 S22 Mag Ang Mag 0.01 82 0.98 0.04 71 0.80 0.06 70 0.73 0.07 69 0.72 0.10 68 0.69 0.11 67 0.68 0.13 66 0.68 0.15 64 0.67 0.19 61 0.66 0.25 55 0.64 0.33 47 0.61 Ang -5 -18 -22 -22 -26 -28 -30 -33 -39 -49 -61 30 0.78 0.66 0.41 0.25 20 GAIN (dB) Rn Notes: 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 2 Figure 21. AT-30511 Gains vs. Frequency at Vce = 2.7 V, Ic = 5 mA. AT-30533 Typical Noise Parameters, Common Emitter, ZO = 50 , 2.7 V, IC = 5 mA OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 1.1 0.71 8 0.9 1.2 0.61 16 1.8 1.5 0.42 39 2.4 1.8 0.28 57 MAG FREQUENCY (GHz) AT-30533 Typical Scattering Parameters, VCE = 2.7 V, IC = 5 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.84 -12 22.26 0.5 0.57 -39 18.54 0.9 0.37 -46 14.97 1.0 0.34 -46 14.20 1.5 0.23 -43 11.24 1.8 0.20 -38 9.85 2.0 0.19 -35 9.05 2.4 0.17 -27 7.70 3.0 0.15 -17 6.12 4.0 0.15 -2 4.30 5.0 0.17 11 3.07 Ang -5 -22 -30 -31 -35 -37 -39 -42 -46 -55 -64 MSG MAG 10 0 MSG S21 0 1 2 3 4 5 FREQUENCY (GHz) Figure 22. AT-30533 Gains vs. Frequency at Vce = 2.7 V, Ic = 5 mA. AT-30511 fig 22 AT-30511 Typical Scattering Parameters, VCE = 5 V, IC = 1 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.98 -5 10.56 0.5 0.96 -21 10.30 0.9 0.88 -37 9.83 1.0 0.85 -41 9.57 1.5 0.74 -59 8.71 1.8 0.67 -69 8.13 2.0 0.63 -75 7.88 2.4 0.55 -88 6.90 3.0 0.43 -106 5.79 4.0 0.31 -138 4.29 5.0 0.25 178 3.04 S21 Mag Ang dB 3.37 175 -40.34 3.27 157 -26.99 3.10 139 -22.52 3.01 136 -21.75 2.73 116 -19.23 2.55 106 -18.34 2.48 100 -17.85 2.21 87 -17.23 1.95 71 -16.53 1.64 49 -15.83 1.42 29 -15.38 S12 S22 Mag Ang Mag 0.01 87 0.999 0.04 74 0.96 0.07 64 0.93 0.08 62 0.92 0.11 51 0.86 0.12 45 0.82 0.13 42 0.80 0.14 37 0.77 0.15 31 0.72 0.16 23 0.67 0.17 20 0.64 Ang -2 -13 -22 -24 -33 -38 -41 -45 -50 -60 -69 30 AT-30511 Typical Noise Parameters, Common Emitter, ZO = 50 , 5 V, IC = 1 mA Rn 1.49 1.33 0.98 0.74 Notes: 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 20 GAIN (dB) OPT Freq Fmin[1] GHz dB Mag Ang [2] 0.5 0.3 0.96 10 0.9 0.4 0.92 19 1.8 0.9 0.83 43 2.4 1.3 0.76 60 MSG MAG 10 S21 0 0 1 S21 Mag Ang dB 3.38 174 -39.38 3.19 151 -26.22 2.92 131 -21.99 2.80 127 -21.21 2.44 106 -19.02 2.24 95 -18.16 2.14 89 -17.66 1.90 77 -16.85 1.66 61 -15.58 1.40 41 -13.34 1.23 23 -10.85 5 AT-30511 fig 23 Ang -2 -13 -21 -23 -30 -33 -35 -39 -43 -53 -65 30 1.02 0.98 0.58 0.38 20 GAIN (dB) Rn Notes: 1. Matching constraints may make Fmin values associated with high |OPT| values unachievable in physical circuits. See Figure 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 4 S12 S22 Mag Ang Mag 0.01 85 0.999 0.05 74 0.95 0.08 65 0.91 0.09 63 0.90 0.11 56 0.83 0.12 54 0.80 0.13 52 0.78 0.14 51 0.75 0.17 51 0.72 0.22 52 0.69 0.29 49 0.67 AT-30533 Typical Noise Parameters, Common Emitter, ZO = 50 , 5 V, IC = 1 mA OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 0.3 0.94 7 0.9 0.4 0.89 16 1.8 0.9 0.75 43 2.4 1.3 0.65 65 3 Figure 23. AT-30511 Gains vs. Frequency at Vce = 5 V, Ic = 1 mA. AT-30533 Typical Scattering Parameters, VCE = 5 V, IC = 1 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.96 -5 10.59 0.5 0.92 -22 10.07 0.9 0.79 -37 9.32 1.0 0.77 -41 8.94 1.5 0.60 -57 7.76 1.8 0.51 -64 7.01 2.0 0.46 -69 6.61 2.4 0.35 -76 5.59 3.0 0.23 -83 4.43 4.0 0.07 -85 2.92 5.0 0.07 38 1.79 2 FREQUENCY (GHz) MSG MAG 10 S21 0 0 1 MSG 2 3 4 5 FREQUENCY (GHz) Figure 24. AT-30533 Gains vs. Frequency at Vce = 5 V, Ic = 1 mA. AT-30511 fig 24 AT-30511 Typical Scattering Parameters, VCE = 5 V, IC = 5 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.90 -10 22.26 0.5 0.74 -43 20.41 0.9 0.53 -66 17.93 1.0 0.49 -70 17.28 1.5 0.33 -89 14.72 1.8 0.27 -99 13.41 2.0 0.24 -105 12.64 2.4 0.18 -120 11.27 3.0 0.12 -147 9.54 4.0 0.11 154 7.41 5.0 0.17 114 5.86 S21 Mag Ang dB 12.98 170 -40.75 10.49 136 -28.46 7.88 113 -25.18 7.31 109 -24.53 5.45 91 -22.46 4.68 83 -21.45 4.29 78 -20.87 3.66 69 -19.79 3.00 57 -18.34 2.35 40 -16.45 1.96 24 -14.84 S12 S22 Mag Ang Mag 0.01 82 0.97 0.04 66 0.83 0.06 58 0.72 0.06 57 0.70 0.08 54 0.63 0.08 53 0.60 0.09 52 0.59 0.10 50 0.57 0.12 48 0.55 0.15 43 0.53 0.18 38 0.52 AT-30511 Typical Noise Parameters, 30 Rn 1.10 0.96 0.66 0.47 Notes: 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. MSG 20 GAIN (dB) Common Emitter, ZO = 50 , 5 V, IC = 5 mA OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 1.1 0.77 9 0.9 1.2 0.71 18 1.8 1.5 0.60 45 2.4 1.8 0.51 65 S21 S21 Mag Ang dB 12.92 165 -40.16 8.60 122 -28.05 5.75 101 -24.14 5.27 97 -23.37 3.75 82 -20.30 3.20 75 -18.88 2.93 70 -18.05 2.50 62 -16.55 2.09 51 -14.64 1.70 36 -12.00 1.47 21 -9.83 MAG 10 0 0 1 2 3 4 5 FREQUENCY (GHz) Figure 25. AT-30511 Gains vs. Frequency at Vce = 5 V, Ic = 5 mA. AT-30533 Typical Scattering Parameters, VCE = 5 V, IC = 5 mA, Common Emitter, ZO = 50 Freq. S11 GHz Mag Ang dB 0.1 0.86 -11 22.22 0.5 0.59 -37 18.69 0.9 0.40 -43 15.19 1.0 0.37 -43 14.43 1.5 0.27 -40 11.49 1.8 0.24 -37 10.11 2.0 0.23 -35 9.33 2.4 0.20 -30 7.97 3.0 0.18 -24 6.40 4.0 0.17 -14 4.58 5.0 0.16 -2 3.37 Ang -5 -22 -30 -31 -36 -38 -39 -42 -46 -55 -63 AT-30511 fig 25 S12 S22 Mag Ang Mag 0.01 83 0.98 0.04 72 0.81 0.06 70 0.74 0.07 70 0.73 0.10 68 0.70 0.11 67 0.69 0.13 66 0.68 0.15 64 0.67 0.19 61 0.66 0.25 54 0.64 0.32 46 0.61 AT-30533 Typical Noise Parameters, Ang -5 -18 -22 -22 -26 -28 -30 -33 -38 -49 -60 30 Common Emitter, ZO = 50 , 5 V, IC = 5 mA Rn 0.78 0.66 0.41 0.25 Notes: 1. Matching constraints may make Fmin values associated with high |opt| values unachievable in physical circuits. See Fig. 2 for expected performance. 2. 0.5 GHz noise parameter values are extrapolated, not measured. 20 GAIN (dB) OPT Freq Fmin[1] GHz dB Mag Ang 0.5[2] 1.1 0.71 8 0.9 1.2 0.61 16 1.8 1.5 0.42 39 2.4 1.8 0.28 57 MSG MAG 10 0 MSG S21 0 1 2 3 4 5 FREQUENCY (GHz) Figure 26. AT-30533 Gains vs. Frequency at Vce = 5 V, Ic = 5 mA. AT-30511 fig 20 Ordering Information Part Numbers No. of Devices Comments AT-30511-BLKG AT-30533-BLKG 100 Bulk AT-30511-TR1G AT-30533-TR1G 3000 7" Reel AT-30511-TR2G AT-30533-TR2G 10000 13" Reel Package Dimensions SOT-143 Plastic Package SOT-23 Plastic Package e2 e2 e1 e1 B1 XXX E E1 E e XXX E1 L B C A Notes: XXX-package marking Drawings are not to scale B e C DIMENSIONS (mm) D A1 L SYMBOL A A1 B C D E1 e e1 e2 E L MIN. 0.79 0.000 0.30 0.08 2.73 1.15 0.89 1.78 0.45 2.10 0.45 MAX. 1.20 0.100 0.54 0.20 3.13 1.50 1.02 2.04 0.60 2.70 0.69 For product information and a complete list of distributors, please go to our web site: DIMENSIONS (mm) D A A1 Notes: XXX-package marking Drawings are not to scale www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2009 Avago Technologies. All rights reserved. Obsoletes 5989-2641EN AV02-0794EN - June 9, 2009 SYMBOL A A1 B B1 C D E1 e e1 e2 E L MIN. 0.79 0.013 0.36 0.76 0.086 2.80 1.20 0.89 1.78 0.45 2.10 0.45 MAX. 1.097 0.10 0.54 0.92 0.152 3.06 1.40 1.02 2.04 0.60 2.65 0.69