eye Splices Nylon-insulated, closed-end 22 to 8 Wire Range Molex-ETC nylon closed-end connectors feature two-piece construction, a translucent nylon molded insulator and a metal connector insert. The connec- tors insert is annealed, tin-plated, seamless, pure electrolytic, tough pitch copper. Individual design and performance requirements dictate the use of copper inserts. These connectors are all rated for a maximum of 600 volts. MATERIAL: COPPER NOTE: For parts on mylar tape, add T at the end of loose piece part number. LISTED @ 1-800-800-0449 connectors Connector Inserts 22 to 8 Wire Range Molex-ETC connector inserts are the same annealed, tin-plated, seamless pieces used in the nylon-insulated, closed-end connectors above. These inserts are used in applications where insulation is not essential. MATERIAL: COPPER Twist Lock Wire Connectors 22 to 10 Wire Range Acone shaped, plated steel spring conforms to the inside contour of the |- A-- insulating shell, which supports the spring as the conductor is driven up into the cone. Requiring no pretwist- ing, the wires are automatically twist- B ed together for a secure connection 1 and maximum contact. Fixed spring | wire connectors may be used to make branch circuit or fixture wire | connections on numerous combina- tions of solid and/or stranded wire. D Wing Lock Wire Connectors 22 to 6 Wire Range A square wire, coiled spring expands freely within the tough plastic shell and can accommodate a wide range of wire combinations. The angled edges of the spring attaches to the conductor as the connector is twist- ed on for an easily secured joint. The spring applies even pressure over the entire contact area, and provides a low resistance connection ~ and mechanical strength against pull ik-- C- | and vibration. Pi Da! i- -E Aq Outside Overall Barrel Inside Circular Wire Part Diameter | Length | Length | Diameter Mil Range Number 0.0. L B 1D. Area 22-14 (0.3-2.0mm:) | NC-2214 | 31 (7,8) 61 (15.5) | 34 (7,8) | 26 (6,6) 600-5,180 22-12 (0.3-3.0mm') | NC-2212 ) 35(8,9) | .75(19,0) | .32(8,2) | .28(7,1) 600-8,230 16-10 (1.2-6.0mm) | NC-1610 | 44 (11.2) | .72 (48,3) | .34(86) | .38(9,6) | 2,200-13,100 8 NC-8 56 (14,2) | 1.09 (27,7) | .43(10,9) | .50(12,7} | 13,100-20,800 Outside Overall Inside Circular Wire Part Diameter | Length | Diameter Mil Range Number 0.D. L LD. Area 22-14 (0.3-2.0mm) | CE-2214 | 126 (3,2) | 327 (8,3) | .092 (2,3) 600-5, 180 22-12 (0.3-3.0mm) | CE-2212} .164 (4,2) | 317481) | 106 (2.7) 600-8,230 16-10 (1.2-6.0mm) | CE-1610 | .203 (5,2) | 337(8,6) | .153(39) | 2,200-13,100 8 CE-8 27 (6,8) 33 (8,4) | .18 (4,6) 13,100-20,800 Part Copper Wire Only Dimensions Number | Wire Range Min. Max. A D TL-G 22/14 1 #22 2 #16 3/16 9/16 14 11/32 (0.3-2.0) | w/t #20 TL-8 22/14 | 3#20 3 #16 1/4 23/32 5/16 13/32 (0.3-2.0) TL-O 22/14 4# 20 3 #16 1/4 27/32 11/32 15/32 (0.3-2.0) w/ #18 TL-Y 18/10 | 1#16 4414 5/16 5/16 76 9/16 (1.0-6.0) | w/2#18 | w/1#16 : TL-R 18/8 2#14 2#10 11/32 11/16 17/32 5/8 . . fo wi2#12 Part Copper Wire Only Dimensions Number | Wire Range | Min. Max. A B 1 o E WL-Y 18/10 | 2#18 3#12 11/32 1-132 38 1/2 23/32 (1.0-6.0) WL -R 18/10 | 2#14 5 #12 11/32 1-1/4 17/32 5/8 29/32 (1.0-6.0) WL-G: 18/8 |2#12 | 3#10 15/32 1-546 | 9/16 W/16 1 w/l#12 WL-B. 14/6 3412 9 1#6 916 1-516 | 21/32 25/32 1 - 7/32 i wi2#8 Molex-ETC connectors must withstand extreme dielectric voltage tests to determine performance. All connectors are UL listed and CSA certified as Pressure-Type wire connectors for 600V max., building wire; 1000V max., signs or fixtures and comply with Federal Specification W-S-610d. Temperature rating 105C (221 F) max.