MCCSEMI.COM
1/3
GS2AFL THRU GS2MFL
Features
• Halogen Free Available Upon Request By Adding Suffix "-HF"
• Extremely Low Thermal Resistance
• Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates
Compliant. See Ordering Information)
• Epoxy Meets UL 94 V-0 Flammability Rating
• Moisture Sensitivity Level 1
Maximum Ratings
• Operating Junction Temperature Range: -55°C to +150°C
• Storage Temperature Range: -55°C to +150°C
•Thermal Resistance: 65°C/W Junction to Ambient
•Thermal Resistance: 13°C/W Junction to Lead
2 Amp Glass
Passivated Rectifier
50 - 1000 Volts
MCC
Part Number
Device
Marking
Maximum
Recurrent
Peak Reverse
Voltage
Maximum
RMS Voltage
Maximum DC
Blocking
Voltage
GS2AFL 50V 35V 50V
GS2BFL 100V 70V 100V
GS2DFL 200V 140V 200V
GS2GFL 400V 280V 400V
GS2JFL 600V 420V 600V
GS2KFL 800V 560V 800V
GS2MFL 1000V 700V 1000V
Electrical Characteristics @ 25°C Unless Otherwise Specied
Average Forward
Current IF(AV) 2.0A TL = 110°C
Peak Forward Surge
Current IFSM 50A 8.3ms, Half Sine
Maximum Instantaneous
Forward Voltage VF1.1V IFM = 2.0A;TJ = 25°C *
Maximum DC Reverse
Current At Rated DC
Blocking Voltage
IR
5μA
125μA
TJ = 25°C
TJ = 125°C
Typical Junction
Capacitance CJ20pF Measured at 1.0MHz, VR=4.0V
*Pulse Test: Pulse Width 300 µsec, Duty Cycle 2%
Note: 1. High Temperature Solder Exemption Applied, See EU Directive Annex 7a.
GS2A
GS2B
GS2D
GS2G
GS2J
GS2K
GS2M
Maximum Reverse
Recovery Time trr
2.1μs(Typ)
4.0μs(Max) IF=0.5A,IR=1.0A,Irr=0.25A
Rev.3-3-02142019
DO-221AC(SMA-FL)
B
D
E
E1
C
A
LL
0.075
(1.9)
0.063
(1.6)
0.232
(5.9)
0.106
(2.7)
inch
mm
MIN MAX MIN MAX
A 0.035 0.047 0.90 1.20
B 0.049 0.065 1.25 1.65
C 0.004 0.016 0.10 0.40
D 0.089 0.116 2.25 2.95
E 0.173 0.220 4.40 5.60
E1 0.126 0.181 3.20 4.60
L 0.028 0.059 0.70 1.50
DIMENSIONS
DIM INCHES MM NOTE
Suggested Solder Pad Layout
Cathode Mark
MCCSEMI.COM
2/3
Curve Characteristics
GS2AFL THRU GS2MFL
0 20 40 120 140 160
0.0
0.4
0.8
1.2
1.6
2.0
2.4
Average Forward Current (A)
Resistive or Inductive Load
Fig. 1 - Forward Current Derating Curve
60 80 100
Lead Temperature (°C)
1 100
0
10
20
30
40
50
60
Peak Forward Surge Current (A)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge
Current
20 120
0.01
0.1
1
10
100
TJ=125°C
TJ=75°C
Instantaneous Reverse Leakage Current (μA)
10
Number of Cycles at 60 Hz
Fig. 4 - Typical Reverse Leakage Characteristics
TJ=25°C
40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
8.3 ms Single Half Sine-Wave
0.01
0.1
1
10
20
0.4 0.6 1.4 1.6
TJ=125°C
0.8 1.0 1.2
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
TJ=25°C
Fig. 3 - Typical Instantaneous Forward Characteristics
Rev.3-3-02142019
MCCSEMI.COM
3/3
Ordering Information
GS2AFL THRU GS2MFL
Device Packing
Part Number-TP Tape&Reel:10Kpcs/Reel
***IMPORTANT NOTICE***
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express
written approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
Rev.3-3-02142019
