P
www.vishay.com Vishay Sfernice
Revision: 08-Sep-11 1Document Number: 53017
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
coefficient, Vishay Sfernice’s proven precision thin film
wraparound resistors exceed requirements of
MIL-PRF-55342G characteristics Y ± 10 ppm/°C (- 55 °C;
+ 155 °C) down to ± 5 ppm/°C (- 55 °C; + 155 °C).
FEATURES
• Load life stability at ± 70 °C for 2000 h:
0.1 % under Pn/0.05 % under Pd
• Low temperature coefficient down to 5 ppm/°C
(- 55 °C; + 155 °C)
• Very low noise < - 35 dB and voltage coefficient
< 0.01 ppm/V
• Wide resistance range: 10 to 76 M
depending on size
• Tolerances to ± 0.01 %
• In lot tracking 5 ppm/°C
• Termination: Thin film technology
• Gold plated or pre-tinned terminations over nickel barrier
• Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR
datasheet (www.vishay.com/doc?53053)
• SMD wraparound terminations
• Withstand moisture resistance test of AEC-Q200
• Compliant to RoHS Directive 2002/95/EC
Notes
*Pb containing terminations are not RoHS compliant, exemptions
may apply
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
DIMENSIONS in millimeters (inches)
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
CASE SIZE
AB
CD/E
MAX. TOL.
+ 0.152 (+ 0.006)
MIN. TOL.
- 0.152 (- 0.006)
MAX. TOL.
+ 0.127 (+ 0.005)
MIN. TOL.
- 0.127 (- 0.005)
NOMINAL NOMINAL NOMINAL TOLERANCE
0302 0.75 (0.029) 0.60 (0.024)
0.5 (0.02)
± 0.127 (0.005)
0.15 (0.006) 0.08 (0.003)
0402 1.00 (0.039) 0.60 (0.024) 0.25 (0.010) 0.1 (0.004)
0505 1.27 (0.005) 1.27 (0.050)
0.38 (0.015)
0.13 (0.005)
0603 1.52 (0.060) 0.85 (0.033)
0705/0805 1.91 (0.075) 1.27 (0.050)
1005 2.54 (0.100) 1.27 (0.050)
1206 3.06 (0.120) 1.60 (0.063) 0.40 (0.016)
1505 3.81 (0.150) 1.32 (0.052) 0.48 (0.019)
2010 5.08 (0.200) 2.54 (0.100)
A
D
D
C
E
E
B
P
www.vishay.com Vishay Sfernice
Revision: 08-Sep-11 2Document Number: 53017
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUGGESTED LAND PATTERN (to IPC-7351A)
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
ELECTRICAL SPECIFICATIONS
Notes
• Case size 2512 under development. Please consult Vishay Sfernice.
(1) Pn = Nominal power - Pd = Derated power intended to improve stability.
(2) For ohmic range versus tolerance and TCR see detailed table on next page.
CHIP SIZE
DIMENSIONS (in millimeter)
Zmax. Gmin. Xmax.
0302 1.30 0.14 0.73
0402 1.55 0.15 0.73
0505 1.82 0.10 1.40
0603 2.37 0.35 0.98
0705/0805 2.76 0.74 1.40
1005 3.39 1.37 1.40
1206 3.91 1.85 1.73
1505 4.66 2.44 1.45
2010 5.93 3.71 2.67
CASE SIZE
POWER RATING
mW LIMITING ELEMENT VOLTAGE
VRESISTANCE RANGE (2)
Pn (1) Pd (1)
0302 40 30 25 10 to 750 k
0402 63 40 50 10 to 1.5 M
0505 125 50 50 10 to 4 M
0603 125 100 75 10 to 3.2 M
0705/0805 200 125 150 10 to 10 M
1005 250 125 75 10 to 8.1 M
1206 330 250 200 10 to 35 M
1505 350 175 75 10 to 15 M
2010 1000 500 300 10 to 76 M
Gmin.
Zmax.
Xmax.
P
www.vishay.com Vishay Sfernice
Revision: 08-Sep-11 3Document Number: 53017
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL SPECIFICATIONS
Resistance range: 10 to 76 M
Resistance tolerance: 0.01 % to 1 %
Power dissipation: Pn: 40 mW to 1 W
Pd: 40 mW to 500 mW
Temperature coefficient: Down to 5 ppm - 55 °C; + 155 °C
CLIMATIC SPECIFICATIONS
Operating temp. range: - 55 °C to + 155 °C
For temperature up to 230 °C, see PHT datasheet
(www.vishay.com/doc?53050)
MECHANICAL SPECIFICATIONS
Substrate: Alumina
Technology: Thin film
Film: Nickel chromium with mineral
passivation or CrSi
Protection: Silicone
Terminations: B type: SnPb over nickel barrier
for solder reflow
N type: SnAg over nickel barrier
G type: gold over nickel barrier
for other applications
Note
(1) R > 39 on request for lower values.
POWER DERATING CURVE
BEST TOLERANCE AND TCR VS. OHMIC VALUE
TEMPERATURE COEFFICIENT
TCR CODE FILM
± 5 ppm/°C (1) C (- 55 °C; + 155 °C) NiCr
± 5 ppm/°C (1) Z (0 °C; + 70 °C) NiCr
± 10 ppm/°C (1) YNiCr
± 25 ppm/°C E NiCr
± 50 ppm/°C H NiCr or CrSi
± 100 ppm/°C K NiCr or CrSi
07020 40 60 80 100 120 140 155
0
20
40
60
80
100
Ambient Temperature in °C
Rated Power (%)
187K
67K
360K
160K
1M3
400K
3M8
720K
35K
260K
100K
511K
332K
2M
550K
5M
1M
50K
400K
150K
750K
500K
3M5
810K
7M5
1M5
75K
4M
1M5
10M
3M2
35M
8M1
76M
15M
750K
P0505
P0402
P0805
P0603
P1206
P1005
P2010
P1505
P0302
10 Ω
TCR H, K
TCR E
TCR Z, Y
TCR C
0.02 %0.05 %
100 Ω250 Ω
0.01 % 0.05 % 0.1 %
P
www.vishay.com Vishay Sfernice
Revision: 08-Sep-11 4Document Number: 53017
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POPULAR OPTIONS
For any option it is recommended to consult Vishay Sfernice for availability first.
Option: Enlarged terminations:
For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint
can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heatsink
(see application note: 53048 Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA
Arrays, CHP Thick Film) www.vishay.com/doc?53048.
Option to order: 0063 (applies to size 1206/1505/2010).
DIMENSIONS (Option 0063) in millimeters
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
SUGGESTED LAND PATTERN (Option 0063)
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
CASE SIZE
ABED
F
MAX. TOL.
+ 0.152
MIN. TOL.
- 0.152
MAX. TOL.
+ 0.127
MIN. TOL.
- 0.127
MAX. TOL.
+ 0.13
MIN. TOL.
- 0.13
MAX. TOL.
+ 0.13
MIN. TOL.
- 0.13
NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL MIN. MAX.
1206 3.06 1.60 0.40 1.215
0.63 0.50 0.761505 3.81 1.32 0.48 1.59
2010 5.08 2.54 2.25
CHIP SIZE DIMENSIONS (IN MILLIMETER)
Zmax. Gmin. Xmax.
1206 3.91
0.50
1.73
1505 4.66 1.45
2010 5.93 2.67
A
B
D
E
F
Enlarged
termination
Uncoatted
ceramic
Bottom view for mounting
Gmin.
Zmax.
Xmax.
P
www.vishay.com Vishay Sfernice
Revision: 08-Sep-11 5Document Number: 53017
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Option: Marking
Option to order 0013:
Marking of ohmic value and tolerance:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure)
Tolerance indicated by a color dot.
Option to order 0014:
Marking of ohmic value:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure)
No standard marking available for smaller sizes.
A price adder will apply to the unit price of the parts for options 0013 and 0014.
Option: AEC-Q200
Moisture resistance
Option to Order 0058:
Specific production process to withstand 85 °C/85 % at Pn/10
PACKAGING
ESD packaging available: waffle-pack, and plastic tape and
reel (low conductivity). Paper tape available upon request
(ESD only) (for size 0603, 0805, and 1206).
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code.
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code.
Notes
(1) 0.05 % under Pd
(2) Option to order
SIZE MOQ
NUMBER OF PIECES PER PACKAGE TAPE
WIDTH
WAFFLE PACK
2" × 2"
TAPE AND REEL
MIN. MAX.
0302
100
100
100
5000
8 mm
0402
0505
0603
0805
0705
4000
1005 221
1206 140
1505 60
2010 100 2000 8 mm
PERFORMANCE
TESTS CONDITIONS MIL OR CECC
REQUIREMENTS
TYPICAL
PERFORMANCES
Thermal shock MIL-PRF-55342G
MIL-STD-202 F-Method 107 F ± 0.05 % ± 0.02 %
Short time overload MIL-PRF-55342G
PARA 3.10.4.7.5 ± 0.05 % ± 0.01 %
Low temperature operation MIL-PRF-55342G
PARA 3.9 and 4.7.4 ± 0.05 % ± 0.01 %
Resistance to solder heat MIL-PRF-55342G
PARA 3.12, 4.7.7, 4.7.1.2 ± 0.05 % ± 0.03 %
Moisture resistance
MIL-PRF-55342G
PARA 3.13 and 4.7.8
MIL-STD-202 F-Method 106 E
± 0.10 % ± 0.01 %
CECC 56 days/40 °C/93 % RH ± 0.10 % ± 0.01 %
AEC-Q200 (2)
85 °C/85 % RH/Pn/10
1000 h
± 0.5 % + 0.05 Max. < 0.3 % + 0.05
High temperature MIL-PRF-55342G
PARA 3.11 and 4.7.6 ± 0.05 % ± 0.05 %
Load life
MIL-PRF-55342G
2000 h Pn at 70 °C
MIL-STD-202 F-Method 108 A
± 0.5 % ± 0.10 % (1)
P
www.vishay.com Vishay Sfernice
Revision: 08-Sep-11 6Document Number: 53017
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Maximum permissible pulse load Pi max. for single pulse
Energy for single pulse
Maximum permissible pulse voltage Ui max.
0.1
1
10
100
Pulse Duration t (s)
Permissible Pulse Power (W)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
P
0.00001
1
10
100
Pulse Duration t (s)
Permissible Pulse Energy (J)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
0.0001
0.001
0.01
0.1
10
100
1000
10 000
Pulse Duration t (s)
Permissible Pulse Voltage (V)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
P
www.vishay.com Vishay Sfernice
Revision: 08-Sep-11 7Document Number: 53017
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Maximum permissible pulse load Pi max.
1.2/50 μs lightning surge
10/700 μs lightning surge
0.1
1
10
100
Pulse Duration t (s)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
Permissible Pulse Power (W)
P
10
100
1000
10 000
Resistor Value (Ω)
Test Voltage (V)
10 100 1000 10 000 100 000
P2512
P1206
P0805
P0603
10
100
1000
10 000
Resistor Value (Ω)
Test Voltage (V)
10 100 1000 10 000 100 000
P1206
P0805
P0603
P
www.vishay.com Vishay Sfernice
Revision: 08-Sep-11 8Document Number: 53017
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) For specific quantity of parts per packaging please consult Vishay Sfernice.
(2) For paper tape please consult Vishay Sfernice (0603, 0805, and 1206 only).
QUICK PROTOTYPING
Vishay Sfernice can offer quick prototyping service in 3 weeks production time for most popular case sizes: 0603, 0805, 1206
(Best tolerance: 0.05 %, best TCR: 10 ppm/°C) - Premium will apply - Check availability
PTRIM
Chips ready to be trimmed available. Please consult Vishay Sfernice.
Notes
• For CECC qualified, see RV datasheet (www.vishay.com/doc?60022)
• For ESCC qualified, see PHR datasheet (www.vishay.com/doc?53037) or PFRR datasheet (www.vishay.com/doc?53046)
• For High Temperature (230 °C), see PHT datasheet (www.vishay.com/doc?53050)
•For Strap (0 ), see PZR datasheet (www.vishay.com/doc?53053)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P0505Y1003BBT0999
GLOBAL MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION
P0302
0402
0505
0603
0705
0805
1005
1206
1505
2010
K =
± 100 ppm/°C
H = ± 50 ppm/°C
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
Z = ± 5 ppm
(0.70 °C)
C = ± 5 ppm
(- 55 °C; + 155 °C)
The first three digits
are significant figures
and the last digit
specifies the number
of zeros to follow,
R designates
decimal point
10R0 = 10
3901 = 3900
1004 = 1 M
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Waffle pack
T = Tape (1)
PT = Paper
tape (2)
Leave
blank if no
option
B: Lead bearing version
N and G: Lead (Pb)-free/RoHS version
Historical Part Number example: P 0505 Y 1003 B B TR R0999 e2
P 0505 Y 1003 B B TR R0999 e2
HISTORICAL
MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION RoHS
P 0302
0402
0505
0603
0705
0805
1005
1206
1505
2010
K =
± 100 ppm/°C
H = ± 50 ppm/°C
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
Z = ± 5 ppm
(0.70 °C)
C = ± 5 ppm
(- 55 °C; + 155 °C)
The first three
digits are
significant figures
and the last digit
specifies the
number of zeros
to follow,
R designates
decimal point
10R0 = 10
3901 = 3900
1004 = 1 M
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Waffle pack
TR = Tape (1)
Leave blank
if no option
e2:
Tin/silver
e4:
Gold
Blank:
SnPb
B: Lead bearing version
N and G: Lead (Pb)-free/RoHS version
0505Y1003PBBT 0 9 99
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
