PC card with bus Right-angle through hole type male connector for PCB with bus ICMB-68LMD+ For PCB slothost Right-angle Through hole PCMCIA/JEITA standard Configuration of product Part No. ICMB- 68 LMD+ Series name No. of contacts: 68 Type of contact LMD: Right-angle through hole type, male 5.083=15.24 5.08 6.35 0.65 HONDA JAPAN 3.5 3 11 14.2 59.7 L (See Table) 38 19.25 23.37 25.275 27.18 29.085 30.99 13.3 8 TM 5.4 51.4 POS.#1 POS.#1 68-o1.20.1 8.5 11.5 POS.#34 (both sides) 68-o0.80.05 8-o0.8+0.05 0 (Through hole) 5.083=15.240.1 6.350.05 5.080.05 8-o1.20.1 (both sides) POS.#34 1.27 1.2733=41.91 54 56.8 POS.#35 0.5 POS.#68 R0.90.1 R0.4+0.05 0 Through hole Pin contact TM Insulator Part No. 1, 17, 34, 35, 51, 68 Shield plate Bracket 36, 37 3.5 Others 4.25 Through hole SMT Press-in IDC L (Contact length) 5.0 Wire Soldering Crimping wrapping 0.8 +0.1 0 1.80.1 Others 3.3 4.3 Dimensions +0.1 0 0.1 Components (both sides) POS.#35 POS.#68 1.270.05 1.2733=41.910.1 0 2-o2.4-0.1 540.1 56.80.1 Recommended PCB layout 19.250.05 23.370.05 25.2750.05 27.180.05 29.0850.05 30.990.05 1.4 (Through hole) Connector for CF card Slot male connector with left-side ejector for TYPE I/II (Reverse type) ICMD-AR50LMY-L+ For PCB For Right-angle SMT CFA standard Configuration of product Part No. ICMD- AR 50 LMY- L+ 45.83 41 CF CARD 4.5 REF. 35.36 REF. TM Components Insulator Shell Eject lever Contacts Eject arm 4-o1.2+0.1 0 2.50.1 16.40.05 1.35MAX. 2.5MIN. POS.#1 PAD POS.#50 50.1 Eject area Spring pin Eject button Connector mating surface 41.2MIN. 32.250.1 27.2MAX. 20.450.1 4.50.05 50.1 10.7MIN. The date of manufacture is marked on the surface (See Note #1) POS.#50 POS.#25 2-o1.2+0.1 0 (Through hole) 2.50.1 0.635 0.6350.0549=31.1150.1 6.30.1 0.6 POS.#1 POS.#26 (Both sides) Edge of PCB 30.1 8.9 7.05 1.30.1 Not pattern area (Both sides) 31.9 REF. 33.75 REF. 40.8 0.05 3.1 36.4MIN. 49.130.1 46.130.1 41.20.1 R10.5MAX. Connector mount area (prohibited area for mounting parts) 0.6350.03 0.40.03 7.1MIN. 0.79 POS.#50 1.27 30.48 40.1 1.27 POS.#26 +1.5 36.4-1 (Dimension after the eject handle is horizontally placed.) after the eject handle 36.4 (Dimension is horizontally placed.) A (See Table) 5 POS.#25 HONDA JAPAN 4 0.8 49.83 40.16 30.05 POS.#1 4.25 REF. (Distance ejected by the eject button.) 7.4(Distance ejected by the eject button.) 5.5(Amount of eject) 5.6+0.2 -0.1 3.5750.1 1.4 Series name Direction of mounting slot AR: Reverse type No. of contacts: 50 LMY: Right-angle SMT type, male Location of eject button L: Left side eject lever, foldable type 0.6350.0349=31.1150.05 40.160.05 22.4MAX. Eject area 26.1MIN. 28.6MIN. 2-o1.6+0.05 0 2-o2.2+0.1 45MIN. 0 PCB dimension side (connector-mounting surface on a PCB) Recommended PCB layout Note 1: DATA CODE; Put a white marking or a marking on heating. :06Y Last two digits of year Month (1,2,3, ... , 9,X,Y,Z) Others Dimensions Pos. No. A 5.0 1, 13, 38, 50 25, 26 3.5 Others 4.25 Wire wrapping Crimping Soldering IDC Press-in SMT Through hole Connector for CF card Slot male connector with left-side ejector for TYPE I/II (Reverse type) ICMD-AR50LMY-L1+ For PCB For Right-angle SMT CFA standard Configuration of product Part No. ICMD- AR 50 LMY- L1+ 6 45.83 41 CF CARD 4 TM POS.#1 POS.#26 2.3 POS.#50 POS.#25 DATE CODE (See Note #1) Contacts Eject arm Through hole SMT Press-in 50.1 2.50.1 2.5MIN. 16.40.05 4.50.05 50.1 41.2MIN. 32.250.1 20.450.1 Not pattern area (Both sides) 6.30.1 POS.#1 PAD POS.#50 0.40.03 0.6350.03 0.6350.0349=31.1150.05 40.160.05 22.4MAX. 26.1MIN. 45MIN. 28.6MIN. PCB dimension side (connector-mounting 2-o2.2+0.1 0 surface on a PCB) Eject area 2-o1.6+0.05 0 Recommended PCB layout Note 1: DATE CODE; Put a white marking or a marking on heating. :06Y Last two digits of year Month (1,2,3, ... , 9,X,Y,Z) Eject button Eject lever Edge of PCB 4-o1.2+0.1 0 Eject area Components Insulator Shell Connector mating surface 2.50.1 0.6350.05 0.6350.0549=31.1150.1 2-o1.2+0.1 0 (Through hole) 1.35MAX. 4.5 10.7MIN. 10 0.6 30.1 0.9 9.4 8.9 7.05 A (See Table) 31.9 REF. 33.75 REF. 40.8 3.1 0.8 49.130.1 46.130.1 41.20.1 Connector mount area 1.30.1(Both sides) (prohibited area for mounting parts) 1 36.9 (Distance that a card is inserted) (Distance that a card is ejected 31.4 by the eject button.) POS.#50 40.1 30.48 4.5 REF. 1.27 POS.#26 1.27 HONDA JAPAN 30.05 7.1MIN. POS.#25 49.83 40.16 4.25 REF. (Distance ejected by the eject button.) POS.#1 0.79 5.6+0.2 -0.1 3.5750.1 1.4 Series name Direction of mounting slot AR: Reverse type No. of contacts: 50 LMY: Right-angle SMT type, male Direction of eject button L1: Left side eject lever, stationary type IDC Wire Soldering Crimping wrapping Others Dimensions Pos. No. 1, 13, 38, 50 A 5.0 25, 26 3.5 Others 4.25 Connector for CF card Slot male connector with right-side ejector for TYPE I/II (Reverse type) ICMD-AR50LMY-R+ For PCB For Right-angle SMT CFA standard Configuration of product Part No. ICMD- AR 50 LMY- R+ Series name Direction of mounting slot AR: Reverse type No. of contacts: 50 LMY: Right-angle SMT type, male Direction of eject button R: Right side eject lever, foldable type 3.1 40.1 Eject area 2-o1.6+0.05 0 PAD 0.40.03 0.6350.03 0.03 0.635 49=31.1150.05 40.160.05 26.1MIN. 22.4MAX. 28.6MIN. 45MIN. 10.7MIN. POS.#50 20.450.1 27.2MAX. 32.250.1 46.7MIN. 50.1 50.1 4.50.05 POS.#1 Eject area 2-o2.2+0.1 0 0.8 0.635 0.63549=31.115 (Dimension after the eject handle is horizontally placed.) 36.4 is horizontally placed.) A (See Table) 31.9 REF. -1 36.4 1.5 (Dimension after the eject handle 5 4 6.30.1 1.35MAX. CF CARD Not pattern area 2.50.1 30.1 +0.1 4-o1.2 0 (Through hole) 30.05 41 Edge of PCB 41.20.1 1.30.1(Both sides) Connector mount area (prohibited area Connector mating surface for mounting parts) 16.40.05 2.5MIN. 2.50.1 35.36 REF. 45.83 2-o1.2 +0.1 0 7.1MIN. POS.#50 7.4 5.5 (Distance ejected by the eject button.) 30.48 1.27 1.27 8.9 40.8 33.75 REF. R10.5 MAX. 46.130.1 POS.#26 7.05 36.4 MIN. 49.130.1 HONDA JAPAN 4.5 REF. 4.25 REF. (Distance ejected by the eject button.) 1.4 40.16 5.65 POS.#25 49.83 0.79 3.575 POS.#1 Recommended PCB layout Components Insulator Shell Dimensions Spring pin Eject button Pos. No. A Eject lever Contacts 1, 13, 38, 50 25, 26 3.5 Eject arm Others 4.25 Others Wire wrapping Crimping Soldering IDC 5.0 Press-in SMT Through hole Connector for CF card Slot male connector with right-side ejector for TYPE I/II (Reverse type) ICMD-AR50LMY-R1+ For PCB For Right-angle SMT CFA standard Configuration of product Part No. ICMD- AR 50 LMY- R1+ POS.#25 49.83 40.16 0.79 3.5750.1 5.6+0.2 -0.1 POS.#1 HONDA JAPAN 6 CF CARD 1 4 2-o1.2+0.1 0 0.8 POS.#50 POS.#25 Not pattern area (Both sides) 30.1 Connector mating surface 4-o1.2+0.1 0 The date of manufacture is marked on the surface (See Note #1) Eject lever Contacts 1, 13, 38, 50 25, 26 3.5 Eject arm Others 4.25 Through hole SMT Press-in IDC 5.0 Wire Soldering Crimping wrapping Others Eject area 2-o1.6+0.05 0 6.30.1 POS.#1 PAD POS.#50 0.6350.03 0.40.03 0.6350.0349=31.1150.05 40.160.05 26.1MIN. 22.4MAX. 45MIN. 2-o2.2+0.1 Eject area 28.6MIN. 0 PCB dimension side (connector-mounting surface on a PCB) Recommended PCB layout 2.50.1 7.1MIN. Note 1: DATE CODE; Put a white marking or a marking on heating. :06Y Components Last two digits of year Insulator Month (1,2,3, ... , 9,X,Y,Z) Shell Pos. No. A Eject button 30.05 16.40.05 2.5MIN. 2.50.1 (Through hole) 10.7MIN. 4.5 49.130.1 46.130.1 41.20.1 Connector mount area (prohibited area 1.30.1 for mounting parts) (Both sides) 1.35MAX. POS.#1 POS.#26 0.6350.05 0.05 0.635 49=31.1150.1 40.1 2.3 Edge of PCB 3.1 7.05 8.9 9.4 0.9 0.6 10 31.4 A (See Table) 40.8 33.75 REF. 31.9 REF. (Distance that a card is ejected by the eject button.) TM 50.1 50.1 4.50.05 20.450.1 32.250.1 41.2MIN. 45.83 41 POS.#50 (Dimension after the eject handle 30.48 36.9 is horizontally placed.) 1.27 POS.#26 1.27 4.25 REF. (Distance ejected by the eject button.) 4.5 REF. 1.4 Series name Direction of mounting slot AR: Reverse type No. of contacts: 50 LMY: Right-angle SMT type, male Direction of eject button R1: Right side eject lever, stationary type