ACPL-217 DC Input , Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description Features The ACPL-217 is a DC-input single channel half-pitch phototransistor optocoupler which contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin SO package. * Current transfer ratio (CTR: 50% (min) at IF = 5mA, VCC = 5V) * High input-output isolation voltage (VISO = 3,000VRMS) The input-output isolation voltage is rated at 3000 Vrms. Response time, tr, is 2s typically, while minimum CTR is 50% at input current of 5 mA * Non-saturated Response time (tr: 2s (typ) at VCC = 10V, IC = 2mA, RL= 100) ACPL-217 pin layout * CMR 10kV/s (typical) 4 1 3 2 Pin 1 2 3 4 Description Anode Cathode Emitter Collector * SO package * Safety and regulatory approvals - cUL - IEC/EN/DIN EN 60747-5-2 * Options available: - CTR Ranks 0, A, B, C & D Applications * I/O Interface for Programmable controllers, computers. * Sequence controllers * System appliances, measuring instruments * Signal transmission between circuits of different potentials and impedances. Ordering Information ACPL-217-xxxx is UL Recognized with 3000 Vrms for 1 minute per UL1577 and Canadian Component Acceptance Notice #5. IC Orientation Rank `C' Rank `D' 200% 300% <CTR< <CTR< 400% 600% IF=5mA, IF=5mA VCE=5V VCE=5V Package Tape & Reel ACPL -217 Rank `A' Rank `B' 80% 130% <CTR <CTR< <160% 260% IF=5mA, IF=5mA, VCE=5V VCE=5V Surface Mount Part number Rank `0' 50% <CTR< 600% IF=5mA, VCE=5V -500E -50AE -50BE -50CE -50DE SO-4 x x 0 -560E -56AE -56BE -56CE -56DE SO-4 x x 0 -700E -70AE -70BE -70CE -70DE SO-4 x X 180 -760E -76AE -76BE -76CE -76DE SO-4 x x 180 IEC/EN/DIN EN 60747-5-2 RoHS Compliant Option Quantity 3000 pcs per reel X 3000 pcs per reel 3000 pcs per reel X 3000 pcs per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-217-560E to order product of SO-4 Surface Mount package in Tape & Reel packaging with IEC/EN/DIN EN 60767-5-2 Safety Approval, 50%<CTR<600% and RoHS compliant. Example 2 ACPL-217-50BE to order product of SO-4 Surface Mount package in Tape & Reel packaging with 130%<CTR<260% and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings 2 Solder Reflow Temperature Profile Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used. Absolute Maximum Ratings Parameter Symbol ACPL-217 Units Storage Temperature TS -55~125 C Operating Temperature TA -55~110 C Average Forward Current IF(AVG) 50 mA Pulse Forward Current IFSM 1 A Reverse Voltage VR 6 V LED Power Dissipation PI 65 mW Collector Current IC 50 mA Collector-Emitter Voltage VCEO 80 V Emitter-Collector Voltage VECO 7 V Isolation Voltage (AC for 1min, R.H. 40~60%) VISO 3000 VRMS Collector Power Dissipation PC 150 mW Total Power Dissipation PTOT 200 mW Lead Solder Temperature 3 260C for 10 seconds Note 1min Electrical Specifications (DC) Over recommended ambient temperature at 25C unless otherwise specified. Parameter Symbol Min. Typ. Max. Units Test Conditions Note Forward Voltage VF - 1.2 1.4 V IF = 20mA Fig.6 Reverse Current IR - - 10 A VR = 5V Terminal Capacitance Ct - 30 - pF V = 0, f = 1MHz Collector Dark Current ICEO - - 100 nA VCE = 48V, IF = 0 mA Fig.12 Collector-Emitter Breakdown Voltage BVCEO 80 - - V IC = 0.5 mA, IF = 0 mA Emitter-Collector Breakdown Voltage BVECO 7 - - V IE = 100 A, IF = 0 mA Current Transfer Ratio CTR 50 - 600 % IF = 5 mA, VCE = 5V Saturated CTR CTR(sat) - 100 - % IF=1mA, VCE = 0.4V Collector-Emitter Saturation Voltage VCE(sat) - - 0.4 V IF = 8mA, IC = 2.4mA RISO 5x1010 1x1011 - DC500V, R.H. 40~60% Floating Capacitance CF - 0.6 1 pF V = 0, f = 1MHz Cut-off Frequency (-3dB) FC - 80 - kHz VCC = 5V, IC = 2 mA, RL = 100 Fig. 2,19 Response Time (Rise) tr - 2 - s tf - 3 - s VCC = 10V, IC = 2 mA, RL = 100 Fig. 1 Response Time (Fall) Turn-on Time ton - 3 - s Turn-off Time toff - 3 - s VCC = 5V, IF = 16 mA, RL = 1.9k Fig. 1, 17 Ta=25C, RL=470, VCM=1.5kV(peak), IF=0mA, VCC=9V, Vnp=100mV Fig.20 Isolation Resistance Turn-ON Time tON - 2 - s Storage Time TS - 25 - s Turn-OFF Time tOFF - 40 - s Common Mode Rejection Voltage CMR - 10 - kV/s IF RL VCC IF VCE tr tf ts VCE 90% 10% ton Figure 1. Switching Time Test Circuit RL VCC Output RD Figure 2. Frequency Response Test Circuit 4 toff CTR=(IC/IF )* 100% Fig.14 60 160 40 ACPL-217 30 20 10 0 -25 -5 15 35 55 Ambient Temperature, Ta( C) 75 95 100 0.1000 40 20 0 25 50 75 Ambient Temperature, Ta( C) 50 C 100 125 -30 C 0C 25 C 75 C Ta = 110 C 10 1 0.4 1.0000 0.6 0.8 1.0 1.2 1.4 Forward Voltage, V F (V) 1.6 1.8 2.0 Figure 6. Forward Current vs. Forward Voltage -3.2 1000 -2.8 Pulse Forward Current, I FP (mA) Forward Voltage Temperature Coefficient V F /Ta (mV/ C) 60 0 -25 Forward Current, I F (mA) Peak Forward Current, I FP (mA) 1000 Figure 5. Pulse Forward Current vs. Duty Cycle Ratio -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 1 10 Forward current, I F (mA) Figure 7. Forward Voltage Temperature Coefficient vs. Forward Current 5 80 100 Pulse width 100 s Ta = 25 C 0.0100 Duty Ratio ACPL-217 100 Figure 4. Collector Power Dissipation vs. Ambient Temperature 10000 0.0010 120 115 Figure 3. Forward Current vs. Ambient Temperature. 10 0.0001 140 Collector Power Dissipation, Pc(mW) Forward Current, I F (mA) 50 100 100 10 1 0.5 Pulse Width 10 s Repetitive Frequency=100Hz Ta=25C 1 1.5 2 Pulse Forward Voltage, V FP (V) Figure 8. Pulse Forward Current vs. Pulse Forward Voltage 2.5 3 50 50 Ta = 25 C 45 50mA 40 Collector Currrent, Ic( mA) Collector Current, Ic(mA) 30mA 20mA 30 P C (max)=150mW 20 10mA 35 30mA 30 25 20mA 20 10mA 15 10 10 0 0 5 Collector-Emitter Voltage, Vce(V) 10 Figure 9. Collector Current vs. Collector-Emitter Voltage 5mA 5 I F =5mA 0 50mA 40 IF = 2mA 0 0.5 Collector-Emitter Voltage, V CE (V) 1 Figure 10. Collector Current vs. Small Collector-Emitter Voltage 0.1 10V 1.E-06 Collector Dark Current, I CEO (A) Collector Current, I C (A) 5V V CE = 0.4V 0.01 0.001 0.0001 0.0001 1.E-10 0.001 0.01 Forward Current, I F (A) 0.1 Figure 11. Collector Current vs. Forward Current 5V VCE = 0.4V 100 Figure 13. Current Transfer Ratio vs. Forward Current 6 Collector-Emitter Saturation Voltage, V CE (sat) (V) Current Transfer Ratio, CTR (%) 10V 0.001 0.01 Forward Current, I F (A) -25 -5 24V 15 35 55 Ambient Temperature, Ta(o C) 5V 10V 75 95 Figure 12. Collector Dark Current vs. Ambient Temperature 1000 10 0.0001 V CE = 48V 1.E-08 0.1 0.18 0.16 0.14 0.12 I F = 8mA, I C = 2.4mA 0.10 IF = 20mA, IC = 1mA 0.08 0.06 IF = 1mA, IC = 0.2mA 0.04 0.02 0.00 -30 5 40 Ambient Temperature, Ta( C) 75 110 Figure 14. Collector-Emitter Saturation Voltage vs. Ambient Temperature 100 1000 10mA 5mA 1mA 1 I F = 0.5mA 0 25 50 Ambient Temperature, Ta ( o C) TON 75 100 Figure 15. Collector Current vs. Ambient Temperature Collector-Emitter Saturation Voltage, V CE(sat) (V) tS 10 t ON 1 I F = 16mA V CC = 5V RL = 1.9k 20 40 60 Ambient Temperature, Ta ( C) 5 10 Load Resistance, RL (k 50 100 5 t OFF 0 1 Figure 16. Switching Time vs. Load Resistance 100 0.1 -20 0 80 100 Ta = 25C 4 3 5mA 0.1 -25 Switching Time, t (s) 10 2 7mA I C = 10mA 1 TS 0.5mA 1mA 3mA 10 TOFF 100 Switching Time, t (S) Collector Current, I C (mA) 25mA IF=16mA VCC=5V Ta=25C 1 0 0 5 10 Forward Current, I F (mA) 15 20 Figure 18. Collector-Emitter Saturation Voltage vs. Forward Current Figure 17. Switching Time vs. Ambient Temperature 0 RL = 100 -2 Vo, (dB) 1k -4 dV/dt Vcc -6 -8 RL V cc = 5V I C = 2mA Ta = 25C 1 Vo V CM V np 9V 470 Vo V CM 10 Frequency, f (kHz) 100 Figure 19. Frequency Response For product information and a complete list of distributors, please go to our web site: (High Voltage Pulse) Figure 20. CMR Test Circuit www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2011 Avago Technologies. All rights reserved. AV02-0470EN - August 3, 2011 V cp Vcp (dV/dt)xCfxRL V cp : Voltage that is generated by the displacement current in floating capacitance between primary and secondary sides.