76 www.vectorelect.com 800-423-5659
Specification subject to change without notice
Pad Cutters, Insertion Tools
Part
No.
P116C
P138A
P138C
A
.055”
.040”
.040”
B
.188”
.086”
.086”
C
.250”
.125”
.125”
Shank
.250”
.125”
.125”
Holder
Type
Handle/Shank
Handle/Shank
Shank Only
Part
No
A13
A13-1
P91A
P156
P133A
P134
P149A
P149
Holder Type
Shank with removable rubber handle
Shank with removable rubber handle
Wooden Handle
Wooden Handle
Shank with removable rubber handle
Wooden Handle
Wooden Handle
Shank with removable rubber handle
Terminal
P/N
T44
T68
T28
T49
T46 series
& K24 - K31
K36
T42-1
T42-1
Use with
Vectorbord®
Pattern G, H .062” holes
Pattern P, .042: holes
Pattern P, .042: holes
Vector Pad Cutters provide an effective method for cre-
ating isolated solder pads around holes in copper clad
boards. Pilot pin enters hole and rotates, creating a
clearance area around the solder pad. Available for
boards with.062” or .042” diameter holes. Also available
without handles for use with manual or power drills.
P138A
Wooden Handle type
Shows pad removal
& pad cutter P116C
Pad Cutter
Part No.
T107/C
T107/10
Pkg Qty
100
10
• Flat cold-drawn flat copper wire, 0.017” thick (+/-0.003”)
• 0.080”W with 0.042” diameter holes on 0.100” centers
• Hot 100% Tin dipped, fully RoHS compliant
• Compatible with most Vectorbord® hole patterns
T107
Bus Strips
HA9
• Card ejector, corner mounting
• Supports up to 40 lbs
extraction force
• White nylon, (hardware included)
Rotation Type Ejector Handle
Part No.
HA9/4
HA9/C
Pkg Qty
4
100
PCB Accessories
Tools & Handles
Tools
Hand Insertion Tools for
Push-In Terminals
P149 Shank with removable rubber handle
Dimensional information for HA9 is on Page 44
Shank Type
(A13 type)
Shank Only
P138C
A13 Shank with removable rubber handle
P149A - Wooden Handle Type
Pad Cutters
HA14
• Extraction/insertion handles
• Mounts on front edge of
Plugbordtm with single screw
or roll-pin
• Plastic (FE4)
Pull Type Ejector Handle
Part No.
HA14
HA14/C
Package
Quantity
4
100
CATALOG 128_CATALOG 128.qxd 4/25/2014 7:15 AM Page 76
78 www.vectorelect.com 800-423-5659
Specification subject to change without notice
Slip-On Contacts
• Reels of slip-on contacts. 5” apart
• Slips onto .025” square posts
• 28 gage PVC insulated blue wire
• Temperature Range: -310 to 221oF
(-190 to 105oC)
Part No.
T120-1/50
T120-1/250
Package
Quantity.
Reel of 50
Reel of 250
Contact
Description
installed on wire
installed on wire
T120-1 EyeletsT15.23,T123
C
.093”
.093”
.093”
Part No.
T15.23/M
T123/500
T123/1000
A
.062”
.055”
.055”
Qty
1000
500
1000
B
.105”
.105”
.105”
• 2 versions provide hole size
reduction
T123 - reduces .055” dia. holes
to .042”
• T123 eyelets are copper with
.0003” to .0005” thick tin plating
T15.23 - reduces .062” dia. holes
to .042”
• Simulates copper thru hole
plating
• Used to commit power and
ground planes
ID
.042”
.042”
.042”
ID
A
B
C
No Contact
T123 Eyelet
Contact
No Contact
Board
T123 Eyelet
Contact
PCB Accessories
Black
Shrinkable
Tubing
Detail
Body
End Terminal Only
.060
REF
1.52
.04 + .02
1.0 + 0.5
Slit-N-Wrap® Wire
Tefzel Insulated Silver Plated Wire for
use with No. 02 Bit
Part No.
W28-6A
W28-6B
W28-6D
W28-6E
W28-6F
W28-6H
W28-6AU
W28-6BU
W28-6DU
W28-6EU
W28-6FU
W28-6HU
AWG
28
28
28
28
28
28
28
28
28
28
28
28
Color
green
red
blue
white
yellow
black
green
red
blue
white
yellow
black
Spool Dia.
1”
1”
1”
1”
1”
1”
1.5”
1.5”
1.5”
1.5”
1.5”
1.5”
Feet/Spool
50
50
50
50
50
50
150
150
150
150
150
150
Spools/Pkg
2
2
2
2
2
2
1
1
1
1
1
1
Accessories
See specifications on Page 81
Tefzel 28 AWG Wire Insulation Properties
Property Test Method Unit Value
Thermal Properities
Nominal Melting Point ASTM D3159 oC 255-280
(oF) (491-536)
Flow Rate ASTM D315 g/10 min 20
Upper Service Temperature UL746 oC 135
Mechanical Properities
Tensile Strength, 23oC (73oF) ASTM D3159 MPa, (psi) 40, (6,500)
Specific Gravity ASTM D792 - 1.71
Ultimate Elongation, 23oC (73oF) ASTM D3159 % 300
Flexural Modulus, 23oC (73oF) ASTM D790 MPa (psi) 1,200 (170,000)
Impact Streength, 23oC (73oF) ASTM D256 J/m (ft-lb/in.) No Break
Hardness, Durometer ASTM D2240 Shore D 63
Compressive Strength ASTM D695 MPa, (psi) 38 (5,500)
Linear Coefficient of Expansion, ASTM E831 mm/mm/oC 12.6x 10-5
0-100oC (32-212oF) in./in./oF (7.0 x 10-5 )
Electrical Properities
Dielectric Strength, 0.25mm (0.010in.) ASTM D149 kV/mm (V/0.001in.) 70 (1,800)
Dielectric Constant, 1MHz,23oC (73oF) ASTM D1531 - 2.5-2.6
Dissipation Factor, 1MHz,23oC (73oF) ASTM D1531 - 0.00540
Volume Resistivity ASTM D257 ohm.cm 1 x 103(1 x 1017)
Arc Resistance ASTM D49 seconds 122
General Properities
Water Absorption, 24 h ASTM D570 % 0.007
Weather and Chemical Resistance - - Excellent
Limiting Oxygen Index ASTM D2863 % 30-32
Vector 28AWG Tefzel wire is rated 300V at 150 degrees C
CATALOG 128_CATALOG 128.qxd 4/25/2014 7:17 AM Page 78
