UTC BC327/328 PNP EPITAXIAL SILICON TRANSISTOR SWITCHING AND AMPLIFIER APPLICATIONS FEATURES *Suitable for AF-Driver stages and low power output stages *Complement to BC337/338 1 TO-92 1: COLLECTOR 2: BASE 3: EMITTER ABSOLUTE MAXIMUM RATINGS (Ta=25C, unless otherwise specified) PARAMETER SYMBOL Collector-emitter voltage : BC327 : BC328 Collector-emitter voltage : BC327 : BC328 Emitter-base voltage Collector current (DC) Collector dissipation Junction Temperature Storage Temperature RATING UNIT -50 -30 V V -45 -25 -5 -800 625 150 -55 ~ +150 V V V mA mW C C VCES VCEO VEBO Ic Pc Tj TSTG ELECTRICAL CHARACTERISTICS (Ta=25C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS Collector-emitter breakdown voltage : BC327 : BC328 Collector-emitter breakdown voltage : BC327 : BC328 Emitter-base breakdown voltage Collector Cut-off Current : BC327 : BC328 DC current gain BVCEO Ic=-10mA, IB=0 Collector-emitter saturation voltage UTC BVCES BVEBO ICES hFE1 hFE2 VCE(sat) MIN TYP MAX UNIT -45 -25 V V -50 -30 -5 V V V Ic=-0.1mA, VBE=0 IE=-10mA, Ic=0 VCE=-45V, IB=0 VCE=-25V, IB=0 VCE=-1V, Ic=-100mA VCE=-1V, Ic=-300mA Ic=-500mA, IB=-50mA -2 -2 100 40 -100 -100 630 nA nA -0.7 V UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R201-038,A UTC BC327/328 PNP EPITAXIAL SILICON TRANSISTOR PARAMETER SYMBOL TEST CONDITIONS Base-emitter on voltage Current gain bandwidth product Output Capacitance VBE(on) fT Cob VCE=-1V, Ic=-300mA VCE=-5V, Ic=-10mA, f=20MHz VCB=-10V, IE=0, f=1MHz MIN TYP MAX UNIT -1.2 V MHz pF 100 12 CLASSIFICATION OF hFE RANK hFE1 hFE2 UTC 16 100-250 60~ 25 160-400 100~ 40 250-630 170~ UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R201-038,A UTC BC327/328 PNP EPITAXIAL SILICON TRANSISTOR TYPICAL CHARACTERISTICS UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R201-038,A UTC BC327/328 PNP EPITAXIAL SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO., LTD. 4 QW-R201-038,A