https://www.phoenixcontact.com/us/products/2782135
09/09/2014Page2/5
Surge protection device-RF-TRAB-2782135
Technical data
Protective circuit
IEC test classification C2
C3
D1
Maximum continuous operating voltage UC130 V AC
Maximum continuous voltage UC (wire-ground) 130 V AC
Maximum continuous voltage UC (wire-shield) 130 V AC
Nominal current IN10 A (25 °C)
Operating effective current IC at UC≤ 1 µA
Residual current IPE ≤ 1 µA
Nominal discharge current In (8/20) µs (Core-Earth) 10 kA
Nominal discharge current In (8/20) µs (Core-Shield) 10 kA
Total surge current (8/20) µs 10 kA
Output voltage limitation at 1 kV/µs (Core-Earth) spike ≤ 600 V
Output voltage limitation at 1 kV/µs (Core-Shield) spike ≤ 600 V
Output voltage limitation at 1 kV/µs (Core-Earth) static ≤ 600 V
Output voltage limitation at 1 kV/µs (Core-Shield) static ≤ 600 V
Voltage protection level UP (Core-Earth) ≤ 600 V
Voltage protection level UP (Core-Shield) ≤ 600 V
Response time tA (Core-Earth) ≤ 100 ns
Response time tA (Core-GND) ≤ 100 ns
Input attenuation aE, asym. 0.3 dB (≤ 250 MHz)
Cut-off frequency fg (3 dB), asym. (shield) in 50 Ohm system typ. 950 MHz
Standing wave ratio SWR in a 50 Ω system ≤ 1.2 (≤ 80 MHz)
Permissible HF power Pmax at VSWR = xx (50 ohm system) 300 W (VSWR = 1.1)
80 W (VSWR = ∞)
Surge carrying capacity in acc. with IEC 61643-21 (Core-Earth) C2 - 10 kV / 5 kA
D1 - 2,5 kA
Connection data
Connection method UHF connector
Connection type IN UHF connector, female
Connection type OUT UHF connector, female
Connection, equipotential bonding
Connection method Screw terminal block
Standards and Regulations
Standards/regulations IEC 61643-21