Technical Document LCD Specification LCD Group LQ050W1LA0A LCD Module Product Specification June 2008 WSVGA LCD Module featuring extremely high resolution, touch panel, LVDS interface, and a built-in, PWM-compatible driver for its LED backlight. Module has 350 nits brightness with 450:1 contrast. RECORDS OF REVISION LQ050W1LA0A ^SPEC No. DATE LD-20132A Mar.06.2008 LD-20132B Jun.19.2008 SUMMARY REVISED No. PAGE - - 1 7 1st Issue 5. Absolute Maximum Ratings Touch panel input voltage Added: Remark [Note 3] 9 6-2. Backlight driving LED life time Added: Typ.15000H 12 7. Touch panel characteristics Input voltage Revised: Max. 7.0V 5.5V 20 16. Reliability Test Items Touch panel testing apparatus Revised: 4.9N 2.4N 21 NOTE 17. Label 1) Module Bar cord label Revised 1) Module label 2nd Issue LD20132B-1 These specification sheets are the proprietary product of SHARP CORPORATION("SHARP) and include materials protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. In case of using the device for applications such as control and safety equipment for transportation(aircraft, trains, automobiles, etc. ), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant system design should be taken. Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment(trunk lines), nuclear power control equipment and medical or other equipment for life support. SHARP assumes no responsibility for any damage resulting from the use of the device, which does not comply with the instructions, and the precautions specified in these specification sheets. Confirm "13. Handling Precautions " item when you use the device. Contact and consult with a SHARP sales representative for any questions about this device. LD20132B-2 Table of contents 1. Application ........................................................................................................................................................... 3 2. Overview............................................................................................................................................................... 3 3. Mechanical Specifications .................................................................................................................................... 3 4. Input Terminals ..................................................................................................................................................... 4 4 - 1. Symbol ..................................................................................................................................................... 4 4 - 2. Function.................................................................................................................................................... 4 4 - 3. LVDS interface block diagram ................................................................................................................. 6 5. Absolute Maximum Ratings ................................................................................................................................. 7 6. Electrical Characteristics ...................................................................................................................................... 7 6 - 1. TFT-LCD panel driving ........................................................................................................................... 7 6 - 2. Backlight driving ...................................................................................................................................... 9 6 - 3. LVDS input specification ....................................................................................................................... 11 6 - 3 - 1. AC characteristics .......................................................................................................................... 11 6 - 3 - 2. LVDS data ..................................................................................................................................... 12 7. Touch panel characteristics ................................................................................................................................. 12 8. Timing Characteristics of Input Signals .............................................................................................................. 12 9. 8 - 1. Timing characteristics ............................................................................................................................ 12 8 - 2. Input data signals and display position on the screen ............................................................................. 13 Input Signals, Basic Display Colors and Gray Scale of Each Color ................................................................... 14 10. Optical Characteristics ........................................................................................................................................ 15 11. Display Quality ................................................................................................................................................... 16 12. Design guidance for touchpanel(T/P) ................................................................................................................. 17 12 - 1. Example of housing design .................................................................................................................... 17 12 - 2. Mounting on display and housing bezel ................................................................................................. 17 13. Handling Precautions .......................................................................................................................................... 18 14. Packing Form ...................................................................................................................................................... 19 15. Storage condition ................................................................................................................................................ 19 16. Reliability Test Items .......................................................................................................................................... 20 17. Label ................................................................................................................................................................... 21 18. RoHS Regulations............................................................................................................................................... 21 Fig. 1 Packing form .................................................................................................................................................. 22 Fig. 2 Outline Dimensions ....................................................................................................................................... 23 LD 20132B-3 1. Application This specification applies to a color TFT-LCD module, LQ050W1LA0A. 2. Overview This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, a control circuit and power supply circuit, a backlight unit, and a touch panel. Graphics and texts can be displayed on a 1024x3x600 dots panel with 262,144 colors by using LVDS (Low Voltage Differential Signaling) to interface and supplying +3.3V DC supply voltage for TFT-LCD panel driving and supply voltage for backlight. In this TFT-LCD panel , low reflection / color filters of excellent color performance and backlights of high brightness are incorporated to realize brighter and clearer pictures, making this model optimum for use in multi-media applications. Optimum viewing direction is 6 o'clock. Backlight-driving LED controller is built in this module. 3. Mechanical Specifications Parameter Specifications Unit Diagonal cm Display size 12.6 (5.0") Active area 109.1 (H)x63.9 (V) mm 1024 (H)x600 (V) pixel Pixel format (1 pixel = R+G+B dots) Pixel pitch 0.106 (H)x0.106 (V) Pixel configuration R,G,B vertical stripe Display mode Normally white Surface treatment Glare and hard-coating (2H) Parameter mm Min. Typ. Max. Unit Width 118.7 119.0 119.3 mm Height 76.0 76.3 76.6 mm Depth 5.4 5.6 mm 67 72 g Unit outline dimensions [Note 1] Mass [Note 1] Outline dimensions is shown in Fig.2 Excluding Touch Panel FPC. LD 20132B-4 4. Input Terminals 4 - 1. Symbol CN1 (LVDS signals,+3.3V DC power supply,B/L power supply,B/L control signal and TP signal) 4 - 2. Pin No. Symbol Pin No. Symbol 2 TP_X2 1 TP_Y2 4 TP_X1 3 TP_Y1 6 GND 5 GND 8 SHTDB 7 BLVcc 10 BRT 9 BLVcc 12 GND 11 BLVcc 14 CKIN+ 13 GND 16 CKIN- 15 GND 18 RxIN2+ 17 GND 20 RxIN2- 19 GND 22 RxIN1+ 21 GND 24 RxIN1- 23 GND 26 RxIN0+ 25 Vcc 28 RxIN0- 27 Vcc 30 GND 29 Vcc Function Pin No. Symbol Function Power Supply 25 Vcc +3.3V power supply 27 Vcc +3.3V power supply 29 Vcc +3.3V power supply 7 BLVcc +5.020V power supply (For Backlight driver) 9 BLVcc +5.020V power supply (For Backlight driver) 11 BLVcc +5.020V power supply (For Backlight driver) 5 GND 6 GND 12 GND 13 GND 15 GND 17 GND 19 GND 21 GND 23 GND 30 GND Remark LD 20132B-5 LVDS signal 14 CK IN+ Receiver signal of LVDS CLK (+) [Note 1] 16 CK IN- Receiver signal of LVDS CLK (-) [Note 1] 18 RxIN2+ Receiver signal of LVDS CH2 (+) [Note 1] 20 RxIN2- Receiver signal of LVDS CH2 (-) [Note 1] 22 RxIN1+ Receiver signal of LVDS CH1 (+) [Note 1] 24 RxIN1- Receiver signal of LVDS CH1 (-) [Note 1] 26 RxIN0+ Receiver signal of LVDS CH0 (+) [Note 1] 28 RxIN0- Receiver signal of LVDS CH0 (-) [Note 1] B/L control signal 8 SHTDB Backlight ON/OFF control signal 10 BRT Backlight dimming control signal Touch Panel signal 1 TP_Y2 Touch panel Y Bottom terminal 2 TP_X2 Touch panel X Left terminal 3 TP_Y1 Touch panel Y Top terminal 4 TP_X1 Touch panel X Right terminal [Note 1] Relation between RxINi(i=0,1,2) and actual data is shown in following section (4-2)(7-2). [Note 2] The shielding case is connected with signal GND. Using connector : (DF30FB-30DS-0.4V (HIROSE)) Corresponding connector : (DF30FB-30DP-0.4V (HIROSE)) (Sharp is not responsible to its product quality, if the user applies a connector not corresponding to the above model.) LD 20132B-6 4 - 3. LVDS interface block diagram Using receiver : Single LVDS interface contained in a control IC Corresponding Transmitter : THC63LVDM63A (THINE) or equivalent (Computer side) RxIN0+(26) 6 6 TxIN 6TxIN11 RxIN0-(28) 6 6 TxIN12TxIN17 TxIN18 [Note 1] TxIN19 [Note 1] TxIN20 ENAB 100 RxIN1-(24) RxIN2+(18) 100 RxIN2-(20) 100 PLL PLL CK IN-(16) 100 Symbol of CN1 (Pin No.) [Note 1] Do not use at high-impedance TxIN 18 - 19. 6 G0G5 B0B5 ENAB CK IN+(14) TxCLK IN CLK RxIN1+(22) R0R5 CLK Internal circuits B0B5 TxIN 0TxIN 5 LVDS to TTL parallel Controller G0G5 6 TTL parallel to LVDS R0R5 (TFT-LCD side) LD 20132B-7 5. Absolute Maximum Ratings Ratings Parameter Symbol Condition Min. Max. Unit Remark [Note 1] VI Ta=25 -0.3 Vcc+0.3 V Vcc Ta=25 0 +4.0 V LED power supply voltage BLVcc Ta=25 0 +28.0 V LED bright control signal BRT Ta=25 0 +5.0 V LED ON/OFF signal SHTDB Ta=25 0 +5.0 V Storage temperature Tstg -25 +70 Topa 0 +60 Vtp Ta=25 0 7.0 V Input voltage +3.3V supply voltage (ambient) Operating temperature [Note 2] (Panel surface) Touch panel input voltage [Note 3] [Note 1] LVDS signals [Note 2] Humidity95%RH Max. at Ta+40. Maximum wet-bulb temperature at +39 or less at Ta>+40. No condensation. [Note 3] TP_X1,TP_Y1,TP_X2,TP_Y2When touch panel controller is connected. 6. 1 Electrical Characteristics 6 - 1. TFT-LCD panel driving Parameter Ta+25 Remark Symbol Min. Typ. Max. Unit Supply voltage Vcc +3.0 +3.3 +3.6 V [Note 2] Current dissipation Icc 120 160 mA [Note 3] Permissive input ripple voltage VRP 100 mVP-P Vcc = +3.3V Input voltage range 0 2.4 V LVDS signals High VI VTH +100 mV VCM = +1.2V Low VTL -100 mV [Note 1] Input current (High) IOH 10 A VI = +2.4V Vcc = +3.6V Input current (Low) IOL 10 A VI = 0V Vcc = 3.6V Termination resistor RT 100 Differential input threshold voltage [Note 1] VCM : Common mode voltage of LVDS driver. Differential input LD 20132B-8 [Note 2] On-off conditions for supply voltage 0.9VCC 0.9VCC 0.1VCC 0.1VCC VCC t1 t3 t2 0.1VCC t5 t4 Valid LVDS signal t6 t7 Backlight ON Backlight (LED) OFF OFF Symbol Min. Max. Remark t1 0 10 ms t2 0 1 s t3 0 1 s t4 0 400 ms t5 200 ms t6 180 ms *1 t7 5 ms *1 *1 : As for the power sequence for backlight, it is recommended to apply above mentioned input timing. If the backlight is lit on and off at a timing other than shown above, displaying image may get disturbed. This is due to variation of output signal from timing generator when LVDS signal is changed from on to off or vice versa, but has no harm to the module itself. [Note] Do not keep the interface signal high-impedance or unusual signal when power is on. Vcc-dip conditions 2.5 VVcc3.0 V td10 ms Under above condition, the display image should return to an appropriate figure after Vcc voltage recovers. 2) Vcc2.5 V td Vcc-dip conditions should also follow the On-off conditions for supply voltage [Note 3] Typical current situation : 16-gray-bar pattern. Vcc=+3.3V Maximum current situation : Vcc=+3.6V RGB RGB RGB GS0 GS4 GS8 RGB RGB GS56 GS60 .... 1) Vcc LD 20132B-9 6 - 2. Backlight driving 1 The backlight system is edge-lighting type with LED. Parameter Symbol Min. Typ. Max. Unit BLVcc +5.0 +7.4 +20.0 V 125 240 mA [Note 1,2] 100 uA [Note 3] Permissive input ripple voltage 100 mVP-P [Note 1] Input signal voltage range 0 5.0 V [Note 4] Input signal High level threshold 2.7 V [Note 4] Input signal Low level threshold 0.2 V [Note 4] PWM frequency fPWM 200 300 400 Hz [Note 4,5] PWM Duty ratio DPWM 1 100 % [Note 4,5] 10000 15000 Hour Supply voltage range Current dissipation LED life time Remark [Note 1] [Note 6] [Note 1] BLVcc [Note 2] Typ: BLVcc = 7.4V , Max: BLVcc = 5.0V ; DPWM =100% [Note 3] BLVcc = 7.4V,SHTBD="Lo" [Note 4] BRT,SHTDB [Note 5] PWM dimming control signal (BRT) fPWM = 1 / (Ton + Toff) BRT signal DPWM = Ton / (Ton + Toff) Ton Toff Maximum Luminance: DPWM = 100% In case of using the low frequency, the deterioration of display quality, flicker, etc, may occur. [Note 6] DPWM = 100% Ta=25 continuous operation LED life time is defined as the time when Brightness becomes 50 % of the original value under standard condition. [Note 7] Backlight ON/OFF function SHTDB BRT Backlight "Lo" OFF "Lo" OFF "Hi" ON "Hi" LD 20132B-10 [Note 8] Power supply input sequence BL_VCC t1 t4 SHTDB PWM Dimming Control t2 t3 BRT ON Back Light OFF OFF Symbol Min. Max. Unit t1 0 ms t2 0 ms t3 0 ms t4 0 ms Remark LD 20132B-11 6 - 3. LVDS input specification 6 - 3 - 1. AC characteristics VCC=+3.0V+3.6VTa0+60 Parameter Symbol Min Typ. Max. Unit Input Data Position 0 (tRCIP=20.48ns) tRIPI -0.25 0.0 +0.25 ns Input Data Position 1 (tRCIP=20.48ns) tRIP0 tRCIP/7-0.25 tRCIP/7 tRCIP/7+0.25 ns Input Data Position 2 (tRCIP=20.48ns) tRIP6 2 tRCIP/7-0.25 2 tRCIP/7 2 tRCIP/7+0.25 ns Input Data Position 3 (tRCIP=20.48ns) tRIP5 3 tRCIP/7-0.25 3 tRCIP/7 3 tRCIP/7+0.25 ns Input Data Position 4 (tRCIP=20.48ns) tRIP4 4 tRCIP/7-0.25 4 tRCIP/7 4 tRCIP/7+0.25 ns Input Data Position 5 (tRCIP=20.48ns) tRIP3 5 tRCIP/7-0.25 5 tRCIP/7 5 tRCIP/7+0.25 ns Input Data Position 6 (tRCIP=20.48ns) tRIP2 6 tRCIP/7-0.25 6 tRCIP/7 6 tRCIP/7+0.25 ns Phase Lock Loop Set tRPLL 10 ms Input Clock Period tRCIP 18.52 20.48 20.83 ns LVDS input timing tRIP2 tRIP3 tRIP4 tRIP5 tRIP6 tRIP0 tRIP1 RxINi+/- RxINi6 RxINi5 RxINi4 RxINi3 RxINi2 RxINi1 RxINi0 RxINi6 RxINi5 RxINi4 RxINi3 RxINi2 RxINi1 CK IN+/- Vdiff=0V Vdiff=0V tRCIP i=0,1,2 Note Vdiff=(RxINi+)-(RxINi-)(CK IN+)-(CK IN-) LVDS phase lock loop set LCDVCC 3.0V Vdiff=0V RIN CK+/tRPLL 2.0V PLLCLK LD 20132B-12 6 - 3 - 2. LVDS data Previous DATA Current DATA RIN CK+/- RIN0+/- R4' R3' R2' R1' R0' G0 R5 R4 R3 R2 R1 R0 G0" RIN11+/- G5' G4' G3' G2' G1' B1 B0 G5 G4 G3 G2 G1 B1" RIN2+/- x' B5' B4' B3' B2' ENAB x x B5 B4 B3 B2 ENAB" 7. 1 Touch panel characteristics Parameter Min. Typ. Max. Unit - 5.0 5.5 V Resistor between terminals(TP_X1-TP_X2) 250 510 850 Resistor between terminals(TP_Y1-TP_Y2) 100 180 300 Line linearity(X direction) - - 1.5 % Line linearity(Y direction) - - 1.5 % 20 - - M Minimum tension for detecting - - 0.8 N Chattering - - 10 ms Input voltage Insuration resistance [Note 1] Wiring diagram of touch panel [Note 2] When touch panel controller is connected. Remark [Note 2] at DC15V Y1 X2 X1 Y2 8. Timing Characteristics of Input Signals 8 - 1. Timing characteristics Vcc=+3.0V+3.6VTa0+60 Parameter Clock Data enable Symbol Min. Typ. Max. Unit Remark Frequency 1/Tc 48 48.836 54 MHz [Note 1] 1260 1312 1408 clock Horizontal period TH 24.512 26.865 s 1024 1024 1024 clock 603 621 900 Line 16.069 16.683 ms 600 600 600 line Horizontal period (High) THd Vertical period TV Signal Vertical period (High) TVd [Note 1] In case of using the long vertical period, the deterioration of display quality, flicker, etc, may occur. LD 20132B-13 TH THd ENAB 1024 DATA (R,G,B) 1 2 1024 Tc 1 599 2 600 ENAB TVd TV 8 - 2. Input data signals and display position on the screen 11 12 21 22 13 11024 31 R G B 6001024 6001 Display position of input data(V H) LD 20132B-14 9. Input Signals, Basic Display Colors and Gray Scale of Each Color Data signal Colors & Basic Color Gray Scale of Red Gray Scale of Green Gray Scale of Blue Gray scale Gray Scale R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GS1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Darker GS2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Brighter GS61 1 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 GS62 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Red GS63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GS1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 Darker GS2 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 Brighter GS61 0 0 0 0 0 0 1 0 1 1 1 1 0 0 0 0 0 0 GS62 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 Green GS63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GS1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 Darker GS2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 Brighter GS61 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 GS62 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 Blue GS63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 : Low level voltage, 1 : High level voltage Each basic color can be displayed in 64 gray scales from 6 bit data signals. According to the combination of total 18 bit data signals, the 262,144-color display can be achieved on the screen. LD 20132B-15 10. Optical Characteristics Ta=+25, Vcc=+3.3V Parameter Horizontal Symbol Condition Min. Typ. Max. Unit 60 70 Deg. 40 50 Deg. 50 60 300 300 450 30 60 0.264 0.314 0.364 y 0.284 0.334 0.384 YLI 250 350 W 1.10 1.30 21,22 Viewing 11 angle range Vertical CR>10 12 =0 CRn Contrast ratio Optimum CRo Remark [Note 1,3,6] [Note 2,4,6] viewing angle r+d Response time Chromaticity of white x =0 ms [Note 2,6] Luminance of white cd/m2 [Note 2,6] White Uniformity [Note 2,4,6] DPWM = 100% [Note 2,7] The measurement shall be executed 30 minutes after lighting at rating. Condition : DPWM = 100% The optical characteristics shall be measured in a dark room or equivalent. [Note 1] Measuring Viewing Angle Range [Note 2] Other Measurements EZ contrast 160RH BM-5A (ELDIM) 400mm (TOPCON) Field= Center of the screen (=0) LCD Panel Center of the screen (=0) LCD Panel LD 20132B-16 [Note 3] Definitions of viewing angle range: [Note 4] Definition of contrast ratio: The contrast ratio is defined as the following. Contrast Ratio (CR) Luminance (brightness) with all pixels white Luminance (brightness) with all pixels black [Note 5] Definition of response time: The response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white" . [Note 6] This shall be measured at center of the screen. 256 512 768 pixels [Note 7] Definition of white uniformity: White uniformity is defined as the following with five measurements 150 300 (AE). w Maximum Luminance of five points (brightness) Minimum Luminance of five points (brightness) 450 pixels 11. Display Quality The display quality of the color TFT-LCD module shall be in compliance with the Incoming Inspection Standard. LD 20132B-17 12. Design guidance for touchpanel(T/P) 12 - 1. Example of housing design (1)If an consumer will put a palm on housing in normal usage, care should be taken as follows. (2)Keep the gap, for example 0.3 to 0.7mm,between bezel edge and T/P surface. The reason is to avoid the bezel edge from contacting T/P surface that may cause a "short" with bottom layer(See Fig.4) (3)Insertion a cushion material is recommended. (4)The cushion material should be limited just on the busbar insulation paste area. If it is over the transparent insulation paste area, a "short" may be occurred. (5)There is one where a resistance film is left in the T/P part of the end of the pole. Design to keep insulation from the perimeter to prevent from mis-operation and so on. 12 - 2. Mounting on display and housing bezel (1)In all cases, the T/P should be supported from the backside of the glass. (2)Do not to use an adhensive-tape to bond it on the front of T/P and hang it to the housing bezel. (3)Never expand the T/P top layer(PET-film) like a balloon by internal air pressure. The life of the T/P will be extremely short. (4)Top layer, PET, dimension is changing with environmental temperature and humidity. Avoid a stress from housing bezel to top layer, because it may cause "waving". (5)The input to the Touchpanel sometimes distorts touch panel itself. Housing Cushion material (=Gascket Area) 0.3 0.7mm PET Film Insulation metal Response Transparent meterial Insulation Paste Glass Prohibition Area Area Electrode Layer LD 20132B-18 13. Handling Precautions a) Be sure to turn off the power supply when inserting or disconnecting the cable. b) Be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist. c) Since the touch panel surface is easily damaged, pay attention not to scratch it. d) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. e) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. f) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. Handle with care. g) Since CMOS LSI is used in this module, take care of static electricity and injure the human earth when handling. Observe all other precautionary requirements in handling components. h) This module has its circuitry PCBs on the rear side and should be handled carefully in order not to be stressed. i) Protect sheet is attached to the module surface to prevent it from being scratched. Peel the sheet off slowly just before the use with strict attention to electrostatic charges. Ionized air shall be blown over during the action. Blow off the 'dust' on the polarizer by using an ionized nitrogen gun, etc.. j) Do not expose the LCD module to a direct sunlight, for a long period of time to protect the module from the ultra violet ray. k) Connect GND of module bezel to stabilize against EMI and external noise. l) When handling LCD modules and assembling them into cabinets, please be noted that long-term storage in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent, adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the LCD modules. m) Adjusting volume have been set optimally before shipment, so do not change any adjusted value. If adjusted value is changed, the specification may not be satisfied. n) Disassembling the module can cause permanent damage and should be strictly avoided. Do not peel off the tapes, and do not remove an internal connector. The final form of the module is Figure 2. o) Please be careful since image retention may occur when a fixed pattern is displayed for a long time. p) Please handle carefully not to charge excessive stress onto the back of the module. Excessive stress may cause unrepairable damage to the module. q) Don't give stress on the surface of the touch panel continuously. It causes unevenness (in such cases as the Newton's Ring) in the touch panel surface. r) Liquid crystal contained in the panel may leak if the LCD is broken. Rinse it as soon as possible if it gets inside your eye or mouth by mistake. LD 20132B-19 14. Packing Form Piling number of cartons Max. 8 Package quantity in one carton 100pcs Carton size 575mm(W)x360mm(D)x225mm(H) Total mass of one carton filled with full modules 10.8kg Packing form Fig.1 15. Storage condition Temperature 040 Humidity 60% or less (no condensation) Storage term 1 year Precautions Direct sunlight Store it in the packing box or the darkroom to avoid direct sunlight. Atmosphere Do not store in a place the causticity gas may occur or near the volatile solvent. Condensation Do not put directly on the floor, and keep the wrapping box on the palette or the stand to avoid the condensation. Moreover, arrange it in a constant direction correctly to improve ventilation under the palette. Keep it separate from the wall in the storage warehouse. Note that ventilation is improved and consider the installation such as ventilators in the warehouse. Manage so that there is no rapid temperature change more than natural environment. LD 20132B-20 16. Reliability Test Items No. Test item Conditions 1 High temperature storage test Ta = 70 2 Low temperature storage test Ta = -25 3 High temperature Ta = 40 ; 95 %RH & high humidity operation test (No condensation) High temperature operation test Tp = 60 4 240h 240h 240h 240h (Panel surface temperature) 5 6 Low temperature operation test Thermal Shock Test Ta = 0 240h +70oC(1hours) -20 oC(1hours) (non- operating) Temperature change time:10/minute 2hours per cycle Tested for 5 cycles 7 Vibration test Frequency range: 105510Hz (non- operating) Stroke: 1.5mm Sweep time: 1minutes Test period: 2 hour for each direction of X,Y,Z 8 Shock test Max. gravity : 980 m/s2 (non- operating) Pulse width : 6 ms, sine wave Direction : X,Y,Z 3 times for each direction. 9 Point activation test Hit it 1,000,000 times with a silicon rubber of R8 HS 60. (Touch panel) Hitting force :4.9N Hitting speed : 3 times per second 10 Writing friction resistance test (Touch panel) Write according to the right illustration in the under -mentioned conditions: Pen : 0.8R Polyacetal stylus Load : 2.4N Speed : 3 strokes per second Stroke : 30mm Frequency : 50000 times 200V,200pF(0) 1time/each terminal 11 ESD [Result Evaluation Criteria] Under the display quality test conditions with normal operation state, these shall be no change, which may affect practical display function. [Normal operation state] Temperature : +15+35, Humidity : 4575, Atmospheric pressure : 86106kPa [Touch panel testing apparatus] motor 2.4N 1 7mm Stroke 30mm Touch panel 7mm LD 20132B-21 17. Label 1 1) Module label: Notation: Model No. Serial No. A Serial No. A.D. Production factory Revision code Production months Serial No. (Production months) 1-9(Jan.-Sep.),X(Oct.),Y(Nov.),Z(Dec) 2) Packing bar code label Notation/ Bar code: Model No. Date Quantity Bar code o Bar code( Bar code 18. RoHS Regulations This component comply with RoHS Regulations. Carton mark 5 Carton mark (This side and other side) LD 20132B-22 (SPAKT0577TPZZ) Fig. 1 Packing form R10R15 LD 20132B-23 2 Fig. 2 Outline Dimensions Technical Document LCD Specification LCD Group NORTH AMERICA Sharp Microelectronics of the Americas 5700 NW Pacific Rim Blvd. Camas, WA 98607, U.S.A. Phone: (1) 360-834-8700 Fax: (1) 360-834-8903 www.sharpsma.com TAIWAN Sharp Electronic Components (Taiwan) Corporation 8F-A, No. 16, Sec. 4, Nanking E. Rd. Taipei, Taiwan, Republic of China Phone: (886) 2-2577-7341 Fax: (886) 2-2577-7326/2-2577-7328 CHINA Sharp Microelectronics of China (Shanghai) Co., Ltd. 28 Xin Jin Qiao Road King Tower 16F Pudong Shanghai, 201206 P.R. China Phone: (86) 21-5854-7710/21-5834-6056 Fax: (86) 21-5854-4340/21-5834-6057 Head Office: No. 360, Bashen Road, Xin Development Bldg. 22 Waigaoqiao Free Trade Zone Shanghai 200131 P.R. China Email: smc@china.global.sharp.co.jp EUROPE Sharp Microelectronics Europe Division of Sharp Electronics (Europe) GmbH Sonninstrasse 3 20097 Hamburg, Germany Phone: 49 (0)180 507 35 07 Fax: (49) 40-2376-2232 www.sharpsme.com JAPAN Sharp Corporation Electronic Components & Devices 22-22 Nagaike-cho, Abeno-Ku Osaka 545-8522, Japan Phone: (81) 6-6621-1221 Fax: (81) 6117-725300/6117-725301 www.sharp-world.com SINGAPORE Sharp Electronics (Singapore) PTE., Ltd. 438A, Alexandra Road, #05-01/02 Alexandra Technopark, Singapore 119967 Phone: (65) 271-3566 Fax: (65) 271-3855 HONG KONG Sharp-Roxy (Hong Kong) Ltd. Level 26, Tower 1, Kowloon Commerce Centre, No. 51, Kwai Cheong Road, Kwai Chung, New Territories, Hong Kong Phone: (852) 28229311 Fax: (852) 28660779 www.sharp.com.hk Shenzhen Representative Office: Room 602-603, 6/F., International Chamber of Commerce Tower, 168 Fuhua Rd. 3, CBD, Futian District, Shenzhen 518048, Guangdong, P.R. China Phone: (86) 755-88313505 Fax: (86) 755-88313515 KOREA Sharp Electronic Components (Korea) Corporation RM 501 Geosung B/D, 541 Dohwa-dong, Mapo-ku Seoul 121-701, Korea Phone: (82) 2-711-5813 ~ 8 Fax: (82) 2-711-5819 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. Suggested applications (if any) are for standard use; See Important Restrictions for limitations on special applications. See Limited Warranty for SHARP's product warranty. The Limited Warranty is in lieu, and exclusive of, all other warranties, express or implied. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY EXCLUDED. In no event will SHARP be liable, or responsible in any way, for any incidental or consequential economic or property damage.