INTERCONNECTS SERIES 714...00X * 2,54 GRID LOW PROFILE CARRIERS * SINGLE AND DOUBLE ROW STRIPS * Low profile receptacles sit 0,79 above the Number of Pins X 2,54 2,54 * Series 714 use MM #1401 and MM #1407 pin 2,54 receptacles. See pages 157 and 170 for details 0,38-0,64 0,25 * 0,46 1,83 DIA. board * Hi-Rel, 4-finger BeCu #30 contact is used in 0,79 1,35 DIA. 2,44 3,68 the #1401 receptacle and a BeCu #11 contact is used in the #1407. Both contacts are rated at 3 amps. See pages 251 and 253 for details 4,19 * Insulators are high temperature thermoplastic, suitable for all soldering operations FIG. 1 ORDERING INFORMATION 0,38-0,53 0,25 * 0,46 1,4 DIA. Single Row (1,4 min. mounting hole) 0,79 2,11 0,97 DIA. 3,23 714-XX-1_ _-41-001000 FIG. 1 3,71 Specify number of pins Single Row (0,99 min. mounting hole) FIG. 2 Specify number of pins 5,08 2,54 714-XX-1_ _-31-007000 FIG. 2 Number of Pins X 2,54 /2 714-XX-2_ _-41-001000 FIG. 3 0,38-0,64 0,25 * 0,46 0,79 1,35 DIA. Specify number of pins 2,44 3,68 4,19 04-64 Double Row (0,99 min. mounting hole) 714-XX-2_ _-31-007000 FIG. 4 Specify number of pins 2,54 FIG. 3 PAGE 76 | INTERCONNECTS 01-64 Double Row (1,4 min. mounting hole) 2,54 1,83 DIA. 01-64 04-64 0,38-0,53 0,25 * 0,46 1,4 DIA. 0,79 2,11 0,97 DIA. 3,23 3,71 RoHS - 2 2011/65/EU SPECIFY PLATING CODE XX= 2,54 FIG. 4 XX=Plating Code See Below 91 93 For Electrical, Mechanical & Enviromental Data, See page 264 41 43 Sleeve (Pin) 5,08m Sn/Pb 5,08m Sn/Pb 5,08m Sn 5,08m Sn Contact (Clip) 0,25m Au 0,76m Au 0,25m Au 0,76m Au Mill-Max Mfg. Corp. * 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 * 516-922-6000 * Fax: 516-922-9253 * www.mill-max.com